Search Results

Search found 5124 results on 205 pages for 'clean up'.

Page 80/205 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Asus z53 laptop overheating problem

  - by Tiberiu Hajas

  hi all, wondering if anyone encountered overheating of asus laptop ? especially the z53 model ? usually the right side of the laptop and vent in the upper corner is blowing hot air when under even minimal load, the CPU temperature can easily get to 65-70C and GPU is even above 80C. I'm using NHC (notebook health control) to set to a higher conservatory power consumption but that helps only a bit, anyone opened up the case ? wondering is require a dust clean ...etc ? I still have some warranty on it. thanks

  Read the article

• AWS EC2: How to determine whether my EC2/scalr AMI was hacked? What to do to secure it?

  - by Niro

  I received notification from Amazon that my instance tried to hack another server. there was no additional information besides log dump: Original report: Destination IPs: Destination Ports: Destination URLs: Abuse Time: Sun May 16 10:13:00 UTC 2010 NTP: N Log Extract: External 184.xxx.yyy.zzz, 11.842.000 packets/300s (39.473 packets/s), 5 flows/300s (0 flows/s), 0,320 GByte/300s (8 MBit/s) (184.xxx.yyy.zzz is my instance ip) How can I tell whether someone has penetrated my instance? What are the steps I should take to make sure my instance is clean and safe to use? Is there some intrusion detection techinque or log that I can use? Any information is highly appreciated.

  Read the article

• Unable to Boot from USB External Hard Drive

  - by Josh Stodola

  I recently upgraded my main development machine to Windows 7. This involved wiping out my primary boot drive (Windows XP 64-bit) and starting clean. Before I wiped it, I did a direct disk-to-disk copy to a big external hard drive I have. While I have been able to migrate most of the necessary files without any problems, I was wanting to boot from it today to check a few settings. I plugged in the hard drive, rebooted, changed the BIOS to boot from USB-HDD first. But, no mattter what I do, it always boots from my primary drive to Windows 7. I do not see any kind of error message or anything. How can I boot to Windows XP 64-bit on this external hard drive?

  Read the article

• OEM Office 2010 without media - how to reinstall?

  - by Bryan

  I have recently purchased a new office desktop PC from Dell with OEM version of Windows 7 Pro and Office 2010 Pro. One of the reasons I always use Dell is that they always supply installation media CDs or DVDs, unlike some other companies that just give you ISO images on the hard disk that you have to burn yourself. This is the first PC I have purchased with Office 2010 Pro (OEM), and I was disappointed to see that Dell don't ship out any installation media for office 2010, they just supply a piece of card with the office pro product key printed on it. If the HDD fails completely and I have to perform a clean installation, how can I re-install office? Can I download the trial version of Office 2010 and install that, then offer it my product key? Bearing in mind that the product key is an OEM product, not a retail product, would this work?

  Read the article

• Installing Linux kernel 2.6.25.14 on RHEL 5.4

  - by aaron

  I have to install Linux kernel version 2.5.25.14 on a RHEL 5.4 server because of drive compatibility issues. I follow the RedHat "Building a Custom Kernel" instructions running the following: $ make mrproper $ make xconfig $ make clean $ make bzImage $ make modules $ make modules_install $ make install But I get a bunch of warnings like this: WARNING: No module ehci-hcd found for kernel 2.6.25.24, continuing anyway When I try to boot this kernel it is unable to mount the hard drive, and kernel panics on startup. As far as I can tell I'm using a standard configuration (I just accept the defaults and save a .config file). Is there something I'm missing? Thanks.

  Read the article

• Installing win xp media center 2005

  - by wdizz

  I have a Dell 710 XPS H2C running Vista Business, I wish to clean install Win XP media center 2005. I wiped my hard drive with Wipe Drive Pro and proceeded to install Win XP, the install starts and goes thru the various prompts but when it comes to 'installing windows' I get a blue screen that flashes briefly (to fast to get the error code) and then reboots. This happens with any XP system disk (iv'e tried 4), but it installs Vista, 7 or Linux with no problems. I contacted Dell Support who have yet to give me any solutions to resolve the problem. Is there anyone out there with any ideas please.

  Read the article

• forced reformat without login / and bootcamp

  - by debug

  ok.. im pretty good with stuff like this, but I have a question. I have mac mini with 10.5.(x) on one partition, and bootcamp (windows) on the other. My boss wants me to reformat the whole mac (10.6 (x)), which is usually easy. He does not remember his password to login, which means I cannot log in and allocate the bootcamp back to one partition using Disk Utility, then reformat the whole drive. When I insert the Snow leopard CD, I can only wipe out one partition, my question is: Is there a way to force a wipe out of both drives in the boot sequence? Any help to wipe out this whole drive and do a clean install would be helpful.. Thanks superusers!

  Read the article

• Removing emails from all mailbox with certain text in subject

  - by Doug Luxem

  So, we had an errant program kick off about 15,000 emails to our users. I have our spam filters now blocking these on the edge until that gets resolved, but now I would like to clean our our users' mailboxes for them. Is there anyway with Exchange 2007 to remove all emails with certain text in the subject line? It would need to be a partial match because the subject changes slightly for each email. I am trying to do this with Forefront's manual scan job + content filter, but it does not seem to like partial matches on the subject.

  Read the article

• Problems with merge replication

  - by jess

  Hi, We are developing a multi-user desktop application with users located in different countries. The platform is - .net 3.5, SQL Server 2008, WinForms. Now, my client has used the help of a DBA who has implemented merge replication. To facilitate replication, we made all our primary keys as GUID. Now, we are facing these issues with replication - subscribers expiration sometimes stops replication and we have found no clean way to re-add every change to db schema requires to poll the whole data all over again! This seems to be strange, what could be the problem here? Also, sometimes we have duplicate keys, and that too stops replication I am sure these issues can be resolved. Maybe, we have not gone the right way to implement. Can you suggest how to go about implementing. Or, is the above information enough to diagnose the problem?

  Read the article

• How to make sure Windows PC is reasonably secure?

  - by Coder

  I'm not much of a network and network security expert, but I need to add an existing Windows PC to a network with always on connection. The problem is, I have no idea if the PC is really clean, and, actually, no knowledge to check it. I scanned the PC with Process Explorer to verify if all running processes are signed, ran an AVG scan, but this is where my knowledge ends. IIRC, there can be bad code attached to svchost or something, bad drivers, and so on, but I have no idea how to check all those things. Reformatting the PC is unfeasible as of now. Are there any suggestions on what I could do?

  Read the article

• Does Ubuntu Server have any sort of cron job to automatically clear /tmp?

  - by DWilliams

  I know it clears out /tmp on reboots, but I haven't been able to find any sort of cron job on my server that clears /tmp. I recently set up a script that writes lots of files to /tmp and my server usually goes several months between reboots so I'm concerned about it being cluttered. I've seen several other distros that have a tmpwatch script installed by default. Ubuntu's repository seems to have replaced tmpwatch with tmpreaper. Is there any mechanism in place on Ubuntu (8.04 currently, soon to be upgraded to 10.04 when I get around to it) to clean up temp files on a server that doesn't regularly reboot or do I need to install tmpreaper?

  Read the article

• How do I create something like a negated character class with a string instead of characters?

  - by Chas. Owens

  I am trying to write a tokenizer for Mustache in Perl. I can easily handle most of the tokens like this: #!/usr/bin/perl use strict; use warnings; my $comment = qr/ \G \{\{ ! (?<comment> .+? ) }} /xs; my $variable = qr/ \G \{\{ (?<variable> .+? ) }} /xs; my $text = qr/ \G (?<text> .+? ) (?= \{\{ | \z ) /xs; my $tokens = qr/ $comment | $variable | $text /x; my $s = do { local $/; <DATA> }; while ($s =~ /$tokens/g) { my ($type) = keys %+; (my $contents = $+{$type}) =~ s/\n/\\n/; print "type [$type] contents [$contents]\n"; } __DATA__ {{!this is a comment}} Hi {{name}}, I like {{thing}}. But I am running into trouble with the Set Delimiters directive: #!/usr/bin/perl use strict; use warnings; my $delimiters = qr/ \G \{\{ (?<start> .+? ) = [ ] = (?<end> .+?) }} /xs; my $comment = qr/ \G \{\{ ! (?<comment> .+? ) }} /xs; my $variable = qr/ \G \{\{ (?<variable> .+? ) }} /xs; my $text = qr/ \G (?<text> .+? ) (?= \{\{ | \z ) /xs; my $tokens = qr/ $comment | $delimiters | $variable | $text /x; my $s = do { local $/; <DATA> }; while ($s =~ /$tokens/g) { for my $type (keys %+) { (my $contents = $+{$type}) =~ s/\n/\\n/; print "type [$type] contents [$contents]\n"; } } __DATA__ {{!this is a comment}} Hi {{name}}, I like {{thing}}. {{(= =)}} If I change it to my $delimiters = qr/ \G \{\{ (?<start> [^{]+? ) = [ ] = (?<end> .+?) }} /xs; It works fine, but the point of the Set Delimiters directive is to change the delimiters, so the code will wind up looking like my $variable = qr/ \G $start (?<variable> .+? ) $end /xs; And it is perfectly valid to say {{{== ==}}} (i.e. change the delimiters to {= and =}). What I want, but maybe not what I need, is the ability to say something like (?:not starting string)+?. I figure I am just going to have to give up being clean about it and drop code into the regex to force it to match only what I want. I am trying to avoid that for four reasons: I don't think it is very clean. It is marked as experimental. I am not very familier with it (I think it comes down to (?{CODE}) and returning special values. I am hoping someone knows some other exotic feature that I am not familiar with that fits the situation better (e.g. (?(condition)yes-pattern|no-pattern)). Just to make things clear (I hope), I am trying to match a constant length starting delimiter followed by the shortest string that allows a match and does not contain the starting delimiter followed by a space followed by an equals sign followed by the shortest string that allows a match that ends with the ending delimiter.

  Read the article

• How do you check Driver Verifier logs on Windows 7 after catching a faulty driver?

  - by Wolf

  I kept getting BSODs on a clean install of Windows 7 (plus updates), so I decided to run Driver Verifier. I had to select all drivers, since it didn't catch the culprit when I didn't include Microsoft drivers. I know it is not a hardware problem since everything is working fine on Linux and memtest86+ is not reporting any errors in the RAM (8 GB). This time, it caught the faulty driver and gave me a BSOD telling me so. Using WhoCrashed, I could verify what was the last error message with the parameters and the source. Yet, the source is always the kernel (ntoskrnl.exe) and the bugcheck this time was 0xC4 (0x85, 0xFFFFF9804429AFC0, 0x2, 0x11B948). After searching on the web, I found out "the driver called MmMapLockedPages without having locked down the MDL pages." As I am not developing any driver, this is of no use to me. However, I would like to know which driver caused Driver Verifier to trigger an alert, so I can either disable it, or rollback to a previous version in order not to get crashes anymore.

  Read the article

• Packaging python software with custom dependencies

  - by viraptor

  Hi, I'm looking for a good way to package a Python application that is going to be deployed on a Debian server. The application itself depends on some modules which are not included in base Debian repository, although they might be in the future. This creates some problems... I depend on some patches to those modules. If the original module gets installed one day, the application will break. However if I install everything I need in a virtualenv just for that application, I lose the ability to upgrade Python itself (in case of security updates). The third option would be to rename my fork of the upstream module and just treat it as a completely separate one. But that would mean changing the code (not much work, but it wouldn't be that clean / universal anymore). Are there any other options that I missed? Are there any pros / cons I didn't see in the solutions above?

  Read the article

• Spanned volumes on new install

  - by Noio

  My Windows 7 Release Candidate is about to expire, so I'm going to do a clean install of a retail version. I have two volumes, on four physical drives, as follows: Disk 0: Spanned Volume (D:) Disk 1: Primary Partition, Boot/Windows Install (C:) Disk 2: Spanned Volume (D:) Disk 3: Spanned Volume (D:) If I install Windows to a formatted drive 1, will it still recognize the spanned volume in Disks 0, 2, and 3? The spanned volume is not redundant in any way, so the volume is 1.5TB consisting of three 500GB disks. I don't have the space to do an external backup, and I thought it was impossible to convert a spanned volume back to a basic volume.

  Read the article

• Removing emails from all mailboxes with certain text in subject

  - by Doug Luxem

  So, we had an errant program kick off about 15,000 emails to our users. I have our spam filters now blocking these on the edge until that gets resolved, but now I would like to clean our our users' mailboxes for them. Is there anyway with Exchange 2007 to remove all emails with certain text in the subject line? It would need to be a partial match because the subject changes slightly for each email. I am trying to do this with Forefront's manual scan job + content filter, but it does not seem to like partial matches on the subject.

  Read the article

• Trouble with installing VMWare-Player 3

  - by Peachy65

  After downloading the VMware-Player 3 from the VMware-Site I wanted to install it; because I used an older VMware-Player the system wanted this to be deinstalled this version first. After starting the deinstallation I had trouble with my machine - shutdown - now I have no proper deinstallation of the older VMware-Player and everytime, I want to install the 3.0, I get an error-message. Is there any possibility, to clean up the rest of the older installation (3-4 processes are still active or are starting again, when I try to close them and therefore I can't delete different .dll-files by hand)? Thanks for your help!

  Read the article

• Plesk Backup Best Practices?

  - by The MYYN

  My client utilizes Plesk (9.X) for Server Management. We're implementing a custom backup solution, which should include a complete restorable representation of the actual Plesk configuration (Emails, Domains, etc.). We have full access, since it is a dedicated server resembling these steps: Plesk offers some backups, but they do not include the actual content of the (sub-)domains. Browsing the docs and the internet, I haven't found much ideas on that problem. Our target is to have a disaster recovery scenario: Reinstall a clean OS (Ubuntu) from scratch. Install MySQL/PHP and dependencies (since this runs the app) Install a bare plesk Restore all domains + plesk configuration from an archive Continue operations ... Now steps 1, 2, 3 and 5 are trivial. But what are the best practices for step 4? A side questions: Are there any easy-to-use open source apps out there, to create and restore server-images (even on machines with an possible different hardware)? Thanks for your time and input.

  Read the article

• Format External HD on Airport Extreme Base Station?

  - by David.Chu.ca

  I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

  Read the article

• FreeBSD Ngnix installation error

  - by Asaf Nevo

  I have a VPS which has Apache webserver installed. I'm trying to install Ngnix on it since my new server will be needing to handle large amount of connection simultaneously. I used this install guide and did: cd /usr/ports/www/nginx make install clean However I get this error: adding module in /usr/ports/www/nginx/work/arut-nginx-dav-ext-module-0e07a3e ./configure: error: no /usr/ports/www/nginx/work/arut-nginx-dav-ext-module-0e07a3e/config was found ===> Script "configure" failed unexpectedly. I'm pretty new to FreeBSD and I am used to controlling my server using Direct Admin. What shall I do next ?

  Read the article

• Windows 8.1 installation: Which drive is the F drive?

  - by sammyg

  I am doing a clean install of Windows 8.1 on an old PC. It was purchased as download from Microsoft Store and written to and booted from a USB flash drive. It went through all of these steps: Copying Windows Files Getting files ready for installation Installing features Installing updates Then at "Getting finished" I am stuck at this stupid dialog box. Please unplug the following external drive and click OK to restart your computer and finish installing Windows. F: How do I tell what physical drive this is? Can I drop to command prompt during installation? And is it safe to unplug it while powered on? There is no external hard drive connected, none that I can see. There is no USB or FireWire drive connected externally. I think it sees one of the internal drives as external... in some weird way?!

  Read the article

• Combine multiple DNS filtering result

  - by Martheen Cahya Paulo

  Several DNS servers provide filtering against different categories, mostly for the local government 'undesirable content', some for malware, and some for ads. What I want is to create/use a DNS server that compare against those filtering DNS servers and only provide the address if all the DNS server agrees. For example if DNS server G provide a clean, unfiltered result, DNS server N provide malware and/or pornography filter, and DNS server F provide ad filter, then G, N and F will only provide the same/similar answer if the query is not categorized as malware, pornography, or advertising. Thus, by creating a server M that only answer if all DNS server agree, M effectively filter against all those categories. Maybe it's possible to do this on DDWRT or Tomato, but if not, I would settle for a solution that can be run in Linux/Windows.

  Read the article

• How the computer could be used by two users at the same time

  - by user59595

  Running windows 7 64, Is there any application that allows me to connect an additional keeyboard and mice and monitor, so that this can be used by other user at the samee time while I use the main computer, There is an application called cpnmouse but it doesnt work on win7, betwin crashes before win7 start up, teamplayer is too expensive Has anyone figured out this functionality maybe with virtual machinees or something, i've tried team player in a virtual machine but it crashes I have 3 monitors one of theem is a Tv, i would like that my girlfried uses it as a terminal without me loosing the focus cause she uses the mice There is a linux software called userful, but it's linux and doesnt work for me, and windows multipoint server needs a clean installation and also that's not a valid choice

  Read the article

• Multiple Copies of Windows Calculator

  - by Brian Boatright

  Just did a clean install of Win7 x64. I have a Microsoft Ergo Keyboard 4000 and use the calculator key a lot. Previously I could hit it and get multiple copies of calculator to popup. Now it will only show one copy of calculator. I tried adding a shortcut to the calculator app but it has the same limitation. However if I click the calculator icon it will open a new one each time. How can I fix this so each time I press the calculator key it will open a new copy?

  Read the article

• Moving mails from SBS 2008 to SBS 2011

  - by starchx

  we are going to upgrade server from SBS 2008 to a new hardware server with SBS 2011. Due to non-experience in Server Migration (eg, answer file), we have decided to choose Clean Install. We have 12 users so that's not too bad. The most challenge problem is to move over all the emails for each user, some user have 5GB inbox. The one method I know is to login to each user account and export the emails to PST file using Outlook 2007. Then connect to new SBS 2011 and import the PST into new inbox. Do we have any other better/quicker ways? Thanks

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >