Search Results

Search found 12371 results on 495 pages for 'ok'.

Page 80/495 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Significance in R

  - by Gemsie

  Ok, this is quite hard to explain, but I'm at a complete loss what to do. I'm a relative newcomer to R and although I can completely admire how powerful it is, I'm not too good at actually using it.... Basically, I have some very contrived data that I need to analyse (it wasn't me who chose this, I can assure you!). I have the right and left hand lengths of lots of people, as well as some numeric data that shows their sociability. Now I would like to know if people who have significantly different lengths of hand are more or less sociable than those who have the same (leading into the research that 'symmetrical' people are more sociable and intelligent, etc. I have got as far as loading the data into R, then I have no idea where to go from there. How on Earth do I start to separate those who are close to symmetrical to those who aren't to then start to do the analysis? Ok, using Sasha's great advice, I did the cor.test and got the following: Pearson's product-moment correlation data: measurements$l.hand - measurements$r.hand and measurements$sociable t = 0.2148, df = 150, p-value = 0.8302 alternative hypothesis: true correlation is not equal to 0 95 percent confidence interval: -0.1420623 0.1762437 sample estimates: cor 0.01753501 I have never used this test before, so am unsure how to intepret it...you wouldn't think I was on my fourth Scientific degree would you?! :(

  Read the article

• Debug formatting code

  - by Arcadian

  I'm trying to debug my code here: private void CheckFormatting() { StringReader objReaderf = new StringReader(txtInput.Text); List<String> formatTextList = new List<String>(); do { formatTextList.Add(objReaderf.ReadLine()); } while (objReaderf.Peek() != -1); objReaderf.Close(); for (int i = 0; i < formatTextList.Count; i++) { if (!Regex.IsMatch(formatTextList[i], "G[0-9]{2}:[0-9]{2}:[0-9]{2}:[0-9]{2} JG[0-9]{2")) { MessageBox.Show("Line " + formatTextList[i] + " is not formatted correctly.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error); break; } else { this.WriteToFile(); MessageBox.Show("Your entries have been saved.", "Saved", MessageBoxButtons.OK, MessageBoxIcon.Information); } } } what it is supposed to do is to check each line in the list. if one of them isn't formatted correctly, then break the loop and display a message box, if all the lines are formatted properly then it should call the WriteToFile method. However, when testing it using input that WAS correctly formatted it displayed the error message and broke the loop. Anyone figure out why? There's some rep points in it for you :) Thanks in advance

  Read the article

• JQuery validate e-mail address regex

  - by RussP

  Hi folks, not too sure about how to do this. I need/want to validate email addresses by regex using something like this: [a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*@(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+(?:[A-Z]{2}|com|org|net|edu|gov|mil|biz|info|mobi|name|aero|asia|jobs|museum) Not I need to run this in a JQ function like this: Where does the validation go and wht is the expression? - please $j("#fld_emailaddress").live('change',function() { var emailaddress = $j("#fld_emailaddress").val(); // validation here? if(emailaddress){} // end validation $j.ajax({ type: "POST", url: "../ff-admin/ff-register/ff-user-check.php", data: "fld_emailaddress="+ emailaddress, success: function(msg) { if(msg == 'OK') { $j("#fld_username").attr('disabled',false); $j("#fld_password").attr('disabled',false); $j("#cmd_register_submit").attr('disabled',false); $j("#fld_emailaddress").removeClass('object_error'); // if necessary $j("#fld_emailaddress").addClass("object_ok"); $j('#email_ac').html('&nbsp;<img src="img/cool.png" align="absmiddle"> <font color="Green"> Your email <strong>'+ emailaddress+'</strong> is OK.</font> '); } else { $j("#fld_username").attr('disabled',true); $j("#fld_password").attr('disabled',true); $j("#cmd_register_submit").attr('disabled',true); $j("#fld_emailaddress").removeClass('object_ok'); // if necessary $j("#fld_emailaddress").addClass("object_error"); $j('#email_ac').html(msg); } } }); });

  Read the article

• Facebook SSO authorize in safari but not in facebook app

  - by Pedro Calero

  My problem: I has developed an app with Facebook SSO in my iPhone/iPad. It was working OK. But I have changed the certificate of my app (so now it has new app ID). I also have changed the "iOS pack ID" property in Facebook: I deleted the old app ID and I added the new one. But now my app doesn't do the Facebook SSO when Facebook app is installed. It does it OK when Facebook app is not installed and it uses Safari. I have read this question and this question that say the problem is the "iOS pack ID" and app ID don't match. I have checked it a lot of times, and it is the same. I have put the old app ID in the "iOS pack ID" property of Facebook, but it still doesn't work. I don't know if Facebook take a time to check if my app ID is valid, and how they show the result. I have been a lot of time with this issue. It seem like the problem is the iOS pack ID is not exactly the app ID, but it is not the problem: they are exactly the same. Thank you very much.

  Read the article

• W3 xHTML Validation Errors on jQuery code!

  - by Chris

  I have some jQuery code that, without it in the document it passes validation fine, but with it in it causes errors. The code in question is here: $.ajax({ type: "GET", url: "data.xml", dataType: "xml", success: function(xml) { //Update error info errors = $(xml).find("Errors").find("*").filter(function () { return $(this).children().length === 0; }); if (errors.length == 0) { statuscontent = "<img src='/web/resources/graphics/accept.png' alt='' /> System OK"; } else { statuscontent = "<img src='/web/resources/graphics/exclamation.png' alt='' /> "+errors.length+" System error"+(errors.length>1?"s":""); } $("#top-bar-systemstatus a").html(statuscontent); //Update timestamp $("#top-bar-timestamp").html($(xml).find("Timestamp").text()); //Update storename $("#top-bar-storename").html("Store: "+$(xml).find("StoreName").text()); } }); There are loads of other jQuery code on the page which all works fine and causes no errors so I cannot quite understand what is wrong with this. The page isn't "live" so cannot provide a link to it unfortunately. The error it lists is document type does not allow element "img" here And the line of code it points to is here: statuscontent = "<img src='/web/resources/graphics/accept.png' alt='' /> System OK"; It also has an issue with the next assignment to statuscontent

  Read the article

• XMLHttpRequest() and outputting csv file

  - by sjw

  Initially, I developed a javascript function to use window.open to post contents of a form to a new window which simply opened the new window and initiated a csv file download. Now on reflection, I find the opening of the window superfluous and am trying to just execute a XMLHttpRequest() to download the csv. I am not getting what I want and I'm not 100% sure that I can so I thought I'd ask here for some assistance. When a form is submitted, I want to take all the form values and post them to another page which builds an SQL string and builds a csv based on the contents. (This I can do and works fine with XMLHttpRequest() as seen below) var xhReq = new XMLHttpRequest(); var parameters = ""; for ( i=0; i<formObj.elements.length; i++ ) { parameters += formObj.elements[i].name + "=" + encodeURI( formObj.elements[i].value ) + "&"; } xhReq.open("POST", outputLocation, false); xhReq.setRequestHeader("Content-type", "application/x-www-form-urlencoded"); xhReq.setRequestHeader("Content-length", parameters.length); xhReq.setRequestHeader("Connection", "close"); xhReq.send(parameters); document.write(xhReq.responseText); The code above calls the page ok, builds the csv ok, but it outputs the contents into the current browser window instead of initiating a csv file download. Can I achieve what I need using XMLHttpRequest() or am I going it about it the wrong way? Thanks

  Read the article

• How should I properly format this code?

  - by ct2k7

  Hi, I've a small issue here. I am using an if statement with UIAlertView and I have two situations, both result in UIAlertViews. However, in one situation, I want to dismiss just the UIAlertView, the other, I want the UIAlertView to be dismissed and view to return to root view. This code describes is: if([serverOutput isEqualToString:@"login.true"]){ [Alert dismissWithClickedButtonIndex:0 animated:YES]; [UIApplication sharedApplication].networkActivityIndicatorVisible = NO; UIAlertView *success = [[UIAlertView alloc] initWithTitle:@"Success" message:@"The transaction was a success!" delegate:self cancelButtonTitle:@"Ok" otherButtonTitles:nil, nil]; [success show]; [success release]; } else { UIAlertView *failure = [[UIAlertView alloc] initWithTitle:@"Failure" message:@"The transaction failed. Contact sales operator!" delegate:self cancelButtonTitle:@"Ok" otherButtonTitles:nil, nil]; [failure show]; [failure release]; } } -(void)alertView: (UIAlertView *)success clickedButtonAtIndex: (NSInteger)buttonIndex{ switch(buttonIndex) { case 0: { [self.navigationController popToRootViewControllerAnimated:YES]; } } } So, in both cases, they follow the above action, but obviously, that's not what I want. Any ideas on what I do here?

  Read the article

• Save Bitmap image in a location in C#

  - by acadia

  Hello, I have this function to store the bmp image in a desired location as shown below My question is, how do I save the image in C:\temp folder by default, instead of opening the filedialog box? I want to specify sd.fileName=picname+".bmp" and store it in c:\temp by default. I tried to specify Thanks for your help in advance. I tried to public static bool SaveDIBAs( string picname, IntPtr bminfo, IntPtr pixdat ) { SaveFileDialog sd = new SaveFileDialog(); sd.FileName = picname; sd.Title = "Save bitmap as..."; sd.Filter = "Bitmap file (*.bmp)|*.bmp|TIFF file (*.tif)|*.tif|JPEG file (*.jpg)|*.jpg|PNG file (*.png)|*.png|GIF file (*.gif)|*.gif|All files (*.*)|*.*"; sd.FilterIndex = 1; if( sd.ShowDialog() != DialogResult.OK ) return false; Guid clsid; if( ! GetCodecClsid( sd.FileName, out clsid ) ) { MessageBox.Show( "Unknown picture format for extension " + Path.GetExtension( sd.FileName ), "Image Codec", MessageBoxButtons.OK, MessageBoxIcon.Information ); return false; } IntPtr img = IntPtr.Zero; int st = GdipCreateBitmapFromGdiDib( bminfo, pixdat, ref img ); if( (st != 0) || (img == IntPtr.Zero) ) return false; st = GdipSaveImageToFile( img, sd.FileName, ref clsid, IntPtr.Zero ); GdipDisposeImage( img ); return st == 0; }

  Read the article

• Creating Actions from UIActionSheets help

  - by user337174

  I am using two UIAction sheets within my current project. I can get one to work perfectly fine but when i insert a second action sheet it runs the same arguements as the first. How do i define the actionsheets seperatly? -(IBAction) phoneButtonClicked:(id)sender { // open a dialog with just an OK button UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:nil delegate:self cancelButtonTitle:@"Cancel" destructiveButtonTitle:nil otherButtonTitles:[NSString stringWithFormat:@"Phone: %@",phone],nil]; actionSheet.actionSheetStyle = UIActionSheetStyleDefault; [actionSheet showInView:self.view]; // show from our table view (pops up in the middle of the table) [actionSheet release]; } -(IBAction) mapButtonClicked:(id)sender { // open a dialog with just an OK button UIActionSheet *mapActionSheet = [[UIActionSheet alloc] initWithTitle:nil delegate:self cancelButtonTitle:@"Cancel" destructiveButtonTitle:nil otherButtonTitles:[NSString stringWithFormat:@"Map"],nil]; mapActionSheet.actionSheetStyle = UIActionSheetStyleDefault; [mapActionSheet showInView:self.view]; // show from our table view (pops up in the middle of the table) [mapActionSheet release]; } -(void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex { if(buttonIndex == 0){ NSString *callPhone = [NSString stringWithFormat:@"tel:%@",phone]; NSLog(@"Calling: %@", callPhone); [[UIApplication sharedApplication] openURL:[NSURL URLWithString:callPhone]]; } }

  Read the article

• Jquery Apache - IE problem

  - by Soldierflup

  I'm having a button tag on my page with a value. <button class='btn' value='value'>show value</button> I have this jquery code : $('.btn').click(function() { var w = 'value = '+$(this).val()+' / text = '+$(this).html(); alert(w); }); In FF, no problem the result is ok (display: value = value / text = show value). The problem comes with IE8 which displays a different results from my testing server and the production server. The testing server is my local machine with a standard XAMPP installation. The productionserver is a server based on linux with apache, php and mysql. Result from the testing server is ok (display like FF), the result from the production server is not good (displaying : value = show value / text : show value). Anyone an idea if it is apache that causes the error ? I know there are some issues with the use of val() because IE is considering it as an attribute and not a value. The problem is that changing the jQuery from val() to attr('value') is quit a lot of work (this implementation is already on a lot of pages) and I think it could be much easier to change something on the webserver.

  Read the article

• Semi-generic function

  - by Fredrik Ullner

  I have a bunch of overloaded functions that operate on certain data types such as int, double and strings. Most of these functions perform the same action, where only a specific set of data types are allowed. That means I cannot create a simple generic template function as I lose type safety (and potentially incurring a run-time problem for validation within the function). Is it possible to create a "semi-generic compile time type safe function"? If so, how? If not, is this something that will come up in C++0x? An (non-valid) idea; template <typename T, restrict: int, std::string > void foo(T bar); ... foo((int)0); // OK foo((std::string)"foobar"); // OK foo((double)0.0); // Compile Error Note: I realize I could create a class that has overloaded constructors and assignment operators and pass a variable of that class instead to the function.

  Read the article

• How to check if new version of Chrome is available?

  - by serg

  I am trying to build an extension that would notify a user when new version of Chrome is available. I tried to inspect network traffic when Chrome is checking for an update and it is sending a request to http://74.125.95.113/service/update2?w=3:{long_encoded_string} page that returns XML with information I need: <?xml version="1.0" encoding="UTF-8"?> <gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod"> <daystart elapsed_seconds="31272"/> <app appid="{8A69D345-D564-463C-AFF1-A69D9E530F96}" status="ok"> <updatecheck status="noupdate"/> <ping status="ok"/> </app> </gupdate> Besides sending {long_encoded_string} as URL parameter it is also sending some encoded cookie. Maybe someone familiar with Chrome build process can shed some light on those encoded strings and how to build them? Maybe there is another easier way (I have a feeling that string encoding is a dead end for me)?

  Read the article

• How stop mp3 playing started with audioplayer

  - by bucche

  Hi, My application consists of a table view. row1, row2, row3.... When a cell is touched a different mp3 starts to play (row1.mp3, row2.mp3, row3.mp3....). it works! but i have a problem: i am not able to stop previous mp3, so if i touch a second cell i have 2 mp3s playing... if i touch a third cell i have 3 mp3s and so on... i want to stop mp3 that started before and play mp3 that is related to touched cell... during my tries, i created a variable to show some alerts if the player plays or not and when i am "inside the if" i used [myAudioPlayer stop].. i see the correct alert but mp3 doesn't stop. here is my code - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { NSArray *elementi = [[array objectAtIndex:indexPath.row] componentsSeparatedByString:@"|"]; NSURL *url = [NSURL fileURLWithPath:[NSString stringWithFormat:@"%@/%@.mp3", [[NSBundle mainBundle] resourcePath],[elementi objectAtIndex:1]]]; NSError *error; myAudioPlayer = [[AVAudioPlayer alloc] initWithContentsOfURL:url error:&error]; myAudioPlayer.numberOfLoops = -1; if (inEsecuzione == 0) { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"1" message:@"1" delegate:nil cancelButtonTitle:@"OK"otherButtonTitles:nil]; [alert show]; [alert release]; [myAudioPlayer play]; inEsecuzione = 1; } else { UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"2" message:@"2" delegate:nil cancelButtonTitle:@"OK"otherButtonTitles:nil]; [alert show]; [alert release]; [myAudioPlayer stop]; inEsecuzione = 0; } } as i wrote before, i am not able to stop previous mp3

  Read the article

• parse.json of authenticated play request

  - by niklassaers

  I've set up authentication in my application like this, always allow when a username is supplied and the API-key is 123: object Auth { def IsAuthenticated(block: => String => Request[AnyContent] => Result) = { Security.Authenticated(RetrieveUser, HandleUnauthorized) { user => Action { request => block(user)(request) } } } def RetrieveUser(request: RequestHeader) = { val auth = new String(base64Decode(request.headers.get("AUTHORIZATION").get.replaceFirst("Basic", ""))) val split = auth.split(":") val user = split(0) val pass = split(1) Option(user) } def HandleUnauthorized(request: RequestHeader) = { Results.Forbidden } def APIKey(apiKey: String)(f: => String => Request[AnyContent] => Result) = IsAuthenticated { user => request => if(apiKey == "123") f(user)(request) else Results.Forbidden } } I want then to define a method in my controller (testOut in this case) that uses the request as application/json only. Now, before I added authentication, I'd say "def testOut = Action(parse.json) {...}", but now that I'm using authentication, how can I add parse.json in to the mix and make this work? def testOut = Auth.APIKey("123") { username => implicit request => var props:Map[String, JsValue] = Map[String, JsValue]() request.body match { case JsObject(fields) => { props = fields.toMap } case _ => {} // Ok("received something else: " + request.body + '\n') } if(!props.contains("UUID")) props.+("UUID" -> UniqueIdGenerator.uuid) if (!props.contains("entity")) props.+("entity" -> "unset") props.+("username" -> username) Ok(props.toString) } As a bonus question, why is only UUID added to the props map, not entity and username? Sorry about the noob factor, I'm trying to learn Scala and Play at the same time. :-) Cheers Nik

  Read the article

• How do I stop a page from unloading (navigating away) in JS?

  - by Natalie Downe

  Does anyone know how to stop a page from reloading or navigating away? jQuery(function($) { /* global on unload notification */ warning = true; if(warning) { $(window).bind("unload", function() { if (confirm("Do you want to leave this page") == true) { //they pressed OK alert('ok'); } else { // they pressed Cancel alert('cancel'); return false; } }); } }); I am working on an e-commerce site at the moment, the page that displays your future orders has the ability to alter the quantities of items ordered using +/- buttons. Changing the quantities this way this doesn't actually change the order itself, they have to press confirm and therefore committing a positive action to change the order. However if they have changed the quantities and navigate away from the page I would like to warn them they are doing so in case this is an accident, as the changed quantities will be lost if they navigate away or refresh the page. In the code above I am using a global variable which will be false by default (its only true for testing), when a quantity is changed I will update this variable to be true, and when they confirm the changes I will set it to false. If warning is true and the page is unloaded, I offer them a confirmation box, if they say no they would like to stay on this page I need to stop it from unloading. return false isn't working, it still lets the user navigate away (the alerts are there for debugging only) Any ideas?

  Read the article

• Problems with video conversions through the web (local host)

  - by ron-d

  Hello, I get the following errors when I attempt video format conversions called from the local host: “An invalid media type was specified” for M4V to WMV conversions. “One or more arguments are invalid” for MP4 to WMV conversions. Here are the details of the problems: I’ve written a dll in C# that accepts videos in the formats AVI, WMV, M4V and MP4 and performs the following actions: Creates a copy of the input video in WMV format . Creates a WAV file of the input video audio portion. Creates a JPG image from a frame of the input video. I attached the dll to an ASP.NET web project that performs the dll actions. When tested through the developer studio, the actions are performed as intended for all formats. When I place the web project in place to be read when the local host is called through the web browser, the following behavior takes place: WMV format: All actions performed as intended. AVI format: Creates WMV file – OK Creates JPG image – OK Creates empty WAV file – problem. M4V format: Creates empty WAV file – problem. Does not create WMV file -problem Does not create JPG file –problem Throws me the error “An invalid media type was specified” MP4 format: Creates empty WAV file – problem. Does not create WMV file -problem Does not create JPG file –problem Throws me the error “One or more arguments are invalid” When I check their security property, all the files have the same permission access parameters (when I check their security property. Can anyone guide me as to how to solve these problems when the web project is called from the local host? Thank you.

  Read the article

• Parsing: How to make error recovery in grammars like " a* b*"?

  - by Lavir the Whiolet

  Let we have a grammar like this: Program ::= a* b* where "*" is considered to be greedy. I usually implement "*" operator naively: Try to apply the expression under "*" to input one more time. If it has been applied successfully then we are still under current "*"-expression; try to apply the expression under "*" one more time. Otherwise we have reached next grammar expression; put characters parsed by expression under "*" back into input and proceed with next expression. But if there are errors in input in any of "a*" or "b*" part such a parser will "think" that in position of error both "a*" and "b*" have finished ("let's try "a"... Fail! OK, it looks like we have to proceed to "b*". Let's try "b"... Fail! OK, it looks like the string should have been finished...). For example, for string "daaaabbbbbbc" it will "say": "The string must end at position 1, delete superflous characters: daaaabbbbbbc". In short, greedy "*" operator becomes lazy if there are errors in input. How to make "*" operator to recover from errors nicely?

  Read the article

• Get Browser to send both If-None-Match and If-Modified-Since

  - by Glen

  My Browser isn't sending back an If-Modified-Since Header for PHP generated Content on the first request my script sends: (Status-Line) HTTP/1.1 200 OK Date Thu, 21 Jan 2010 08:55:25 GMT Server Apache/2.2.11 (Win32) PHP/5.2.9-1 X-Powered-By PHP/5.2.9-1 Pragma no-cache x-ua-compatible IE=8;FF=3;OtherUA=4 Last-Modfied Sat, 02 Jan 2010 02:02:20 GMT Content-Length 28453 Etag b98e0795b509be20146f58e06fbb624f Keep-Alive timeout=5, max=90 Connection Keep-Alive Content-Type image/png it on the second request it sends: (Request-Line) GET /kincumberunitingchurch/banner_image.php?id=1 HTTP/1.1 Host localhost User-Agent Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17 Accept image/png,image/*;q=0.8,*/*;q=0.5 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 300 Connection keep-alive Referer http://localhost/kincumberunitingchurch/index.php?sid=tgl9jq3f71nau3cj9vps6pna03 Cookie sid=tgl9jq3f71nau3cj9vps6pna03; PHPSESSID=m0jvven6d7l65pl6odm9ecfnt4 If-None-Match b98e0795b509be20146f58e06fbb624f Cache-Control max-age=0 for other files the sever sends first: (Status-Line) HTTP/1.1 200 OK Date Thu, 21 Jan 2010 08:55:25 GMT Server Apache/2.2.11 (Win32) PHP/5.2.9-1 Last-Modified Wed, 30 Dec 2009 02:40:58 GMT Etag "1000000013d35-40d9-47be9117f6280" Accept-Ranges bytes Content-Length 16601 Keep-Alive timeout=5, max=84 Connection Keep-Alive Content-Type image/png and my browser send the following on the next request: (Request-Line) GET /kincumberunitingchurch/img/cbuttons.png HTTP/1.1 Host localhost User-Agent Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.0.17) Gecko/2009122116 Firefox/3.0.17 Accept image/png,image/*;q=0.8,*/*;q=0.5 Accept-Language en-us,en;q=0.5 Accept-Encoding gzip,deflate Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive 300 Connection keep-alive Referer http://localhost/kincumberunitingchurch/mystyle.css Cookie sid=tgl9jq3f71nau3cj9vps6pna03; PHPSESSID=m0jvven6d7l65pl6odm9ecfnt4 If-Modified-Since Wed, 30 Dec 2009 02:40:58 GMT If-None-Match "1000000013d35-40d9-47be9117f6280" Cache-Control max-age=0 why would it send the If-Modified-Since header

  Read the article

• passing string to a AJAX/JSON function

  - by Mikey1980

  I’m having trouble getting a AJAX/JSON function to work correctly. I had this function grabbing value from a drop down box but now I want to use an anchor tag to set it's value. I thought it would be easy to just use the onClick event to pass string to the function I was using for the drop down box but it doesn’t do anything. I’m stumped! Here how I set it up: 1st I add an onClick event… <a href="<?php echo Settings::get('app.webroot'); ?>?view=schedule&action=questions" onmouseout="MM_swapImgRestore();" onmouseover="MM_swapImage('bre','','template/images/schedule/bre_f2.gif',1) onclick="assignCallType('testing')";> 2nd I check main.js.php function assignCallType(type) { alert(type); //just for debugging new Request.JSON({ url: "ajax.php", onSuccess: function(rtndata,txt){ if (rtndata['STATUS'] != 'OK') alert('Error assigning call type to call'); }, onFailure: function (xhr) { alert('Error assigning call type to call'); } }).get({ 'action': 'assignCallType', 'call_type': type }); } 3rd Ajax.php: the variable is back in PHP and values don’t get added to the db, but I also didn’t get the alert from main.js.php if ($_GET['action'] == "assignCallType") { if ($USER->isInsideSales()) { $call_type = $_GET['call_type']; $_SESSION['callinfo']->setCallType($call_type); $_SESSION['callinfo']->save($callid); echo json_encode(array('STATUS'=>'OK')); } else { echo json_encode(array('STATUS'=>'DENIED')); } } Any idea where I am going wrong. The only difference between this and the working drop down is how the function was called, I used onchange="assignCallType(this.value)".

  Read the article

• Any reason why my $.ajax success callback is not executed in Jquery?

  - by arma

  Hello, Today i discovered that my dev version of my website do not execute success callback, but all other javascript and jquery code is running good. Even my ajax request is performed and i can see response in firebug. $('#login').submit(function(){ var email = $('#l_email').val(); var pass = $('#l_pass').val(); if(email && pass != ''){ var str = decodeURIComponent($(this).serialize()); $.ajax({ type: "POST", url: "login.php", data: str, success: function(msg){ if(msg == 'OK'){ window.location = 'index.php' }else if (msg == 'NOT_OK'){ if(lang == 'lv'){ alert(message); }else if(lang == 'ru'){ alert(message); } }else if (msg == 'EMAIL_NOT_VALID'){ if(lang == 'lv'){ alert(message); }else if(lang == 'ru'){ alert(message); } } } }); }else{ alert('That form is empty.'); } return false; }); The thing is $.ajax part executes fine and i can see response in firebug "OK". But redirect is not happening and even if i replace that redirect with something like alert or console.log nothing comes up. What could cause this? It's really hard to track since firebug gives no errors.

  Read the article

• Can't get node.js built on cygwin

  - by mwt

  Following the instructions here: https://github.com/ry/node/wiki/Building-node.js-on-Cygwin-(Windows) I've tried installing on two machines, either of which I'd be happy to get up and running. WinXP On 'make', I get: Build failed: -> task failed <err #2>: {task: libv8.a SConstruct -> libv8.a} According to the instructions, this is caused by having $SHELL set to a Windows style path, but I've set it to /bin/bash and get the same error. Win7 On './configure', I get: $ ./configure Checking for program g++ or c++ : /usr/bin/g++ Checking for program cpp : /usr/bin/cpp Checking for program ar : /usr/bin/ar Checking for program ranlib : /usr/bin/ranlib Checking for g++ : ok Checking for program gcc or cc : /usr/bin/gcc 0 [main] python 1092 C:\bin\python.exe: *** fatal error - unable to remap \\?\C:\lib\python2.6\lib-dynload\_functools.dll to same address as parent: 0x360000 != 0x3E0000 Stack trace: Frame Function Args 002891E8 6102749B (002891E8, 00000000, 00000000, 00000000) 002894D8 6102749B (61177B80, 00008000, 00000000, 61179977) 0028A508 61004AFB (611A136C, 61241CF4, 00360000, 003E0000) End of stack trace 0 [main] python 3536 fork: child 1092 - died waiting for dll loading, errno 11 /Users/Michael/Desktop/node/wscript:177: error: could not configure a c compiler! I've run 'rebaseall' and restarted the machine but still get that error. Edit: Ok, rebaseall was apparently erroring on some mingw stuff, so I edited the rebaseall script to fix that, and now it configures on Win7. The new problem is that it emits the exact same error as my XP machine now when I try to make. This is on tag v0.3.5.

  Read the article

• What's so bad about building XML with string concatenation?

  - by wsanville

  In the thread What’s your favorite “programmer ignorance” pet peeve?, the following answer appears, with a large amount of upvotes: Programmers who build XML using string concatenation. My question is, why is building XML via string concatenation (such as a StringBuilder in C#) bad? I've done this several times in the past, as it's sometimes the quickest way for me to get from point A to point B when to comes to the data structures/objects I'm working with. So far, I have come up with a few reasons why this isn't the greatest approach, but is there something I'm overlooking? Why should this be avoided? Probably the biggest reason I can think of is you need to escape your strings manually, and most programmers will forget this. It will work great for them when they test it, but then "randomly" their apps will fail when someone throws an & symbol in their input somewhere. Ok, I'll buy this, but it's really easy to prevent the problem (SecurityElement.Escape to name one). When I do this, I usually omit the XML declaration (i.e. <?xml version="1.0"?>). Is this harmful? Performance penalties? If you stick with proper string concatenation (i.e. StringBuilder), is this anything to be concerned about? Presumably, a class like XmlWriter will also need to do a bit of string manipulation... There are more elegant ways of generating XML, such as using XmlSerializer to automatically serialize/deserialize your classes. Ok sure, I agree. C# has a ton of useful classes for this, but sometimes I don't want to make a class for something really quick, like writing out a log file or something. Is this just me being lazy? If I am doing something "real" this is my preferred approach for dealing w/ XML.

  Read the article

• SDK Platform Tools component missing - Similar to Android Eve below

  - by Hertfordkc

  Ubuntu Linux 10.04//Eclipse 3.5.2 I'm new to Eclipse and Android. Eclipse is up and running simple Jave apps OK. I moved on to downloading the Android SDK starter package, which seemed to go OK. Ran the SDK manager and downladed Platforms 7,8 & 9. Installed the ADT package in Eclipse. I've tried to load the SDK path into the Eclipse Preferences, but it won't retain the path. After restart, Elipse says it can't find SDK package. Also,one message said that the (revision?) number of the ADT couldn't be found. I've reinstalled Eclipse a couple of times, and then gone through the SDK & ADT download procedures a couple of times and am stuck. Any suggestions will be appreciated. Hertfordkc Stupid question caused by not thoroughly reading the Android Developers Guide and the tutorials before trying to start a project. Don't know why I didn't get a message about a missing XML file.

  Read the article

• PhotoChooserTask + Navigation.

  - by user562405

  I taken two Images & added event (MouseButtonDown) for them. When first image handles event to open Gallery. Second image handles events for open camera. When user has choosed his image from the gallery, I want to navigate to next page. Its navigates. But before completing navigation process, it displays MainPage & then moves toward next page. I didnt want to display the MainPage once user chooses the image from the gallery. Plz help. Thanks in advance. public partial class MainPage : PhoneApplicationPage { PhotoChooserTask objPhotoChooser; CameraCaptureTask cameraCaptureTask; // Constructor public MainPage() { InitializeComponent(); objPhotoChooser = new PhotoChooserTask(); objPhotoChooser.Completed += new EventHandler<PhotoResult>(objPhotoChooser_Completed); cameraCaptureTask = new CameraCaptureTask(); cameraCaptureTask.Completed += new EventHandler<PhotoResult>(objCameraCapture_Completed); } void objPhotoChooser_Completed(object sender, PhotoResult e) { if (e != null && e.TaskResult == TaskResult.OK) { //Take JPEG stream and decode into a WriteableBitmap object App.CapturedImage = PictureDecoder.DecodeJpeg(e.ChosenPhoto); //Delay navigation until the first navigated event NavigationService.Navigated += new NavigatedEventHandler(navigateCompleted); } } void navigateCompleted(object sender, EventArgs e) { //Do the delayed navigation from the main page this.NavigationService.Navigate(new Uri("/ImageViewer.xaml", UriKind.RelativeOrAbsolute)); NavigationService.Navigated -= new NavigatedEventHandler(navigateCompleted); } void objCameraCapture_Completed(object sender, PhotoResult e) { if (e.TaskResult == TaskResult.OK) { //Take JPEG stream and decode into a WriteableBitmap object App.CapturedImage = PictureDecoder.DecodeJpeg(e.ChosenPhoto); //Delay navigation until the first navigated event NavigationService.Navigated += new NavigatedEventHandler(navigateCompleted); } } protected override void OnBackKeyPress(System.ComponentModel.CancelEventArgs e) { e.Cancel = true; } private void image1_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { objPhotoChooser.Show(); } private void image2_MouseLeftButtonDown(object sender, MouseButtonEventArgs e) { cameraCaptureTask.Show(); }

  Read the article

• How do I return a variable in javascript?

  - by bmckim

  I am working with the google maps API and whenever I return the variable to the initialize function from the codeLatLng function it claims undefined. If I print the variable from the codeLatLng it shows up fine. var geocoder; function initialize() { geocoder = new google.maps.Geocoder(); var latlng = new google.maps.LatLng(40.730885,-73.997383); var addr = codeLatLng(); document.write(addr); } function codeLatLng() { var latlng = new google.maps.LatLng(40.730885,-73.997383); if (geocoder) { geocoder.geocode({'latLng': latlng}, function(results, status) { if (status == google.maps.GeocoderStatus.OK) { if (results[1]) { return results[1].formatted_address; } else { alert("No results found"); } } else { alert("Geocoder failed due to: " + status); } }); } } prints out undefined If I do: var geocoder; function initialize() { geocoder = new google.maps.Geocoder(); var latlng = new google.maps.LatLng(40.730885,-73.997383); codeLatLng(); } function codeLatLng() { var latlng = new google.maps.LatLng(40.730885,-73.997383); if (geocoder) { geocoder.geocode({'latLng': latlng}, function(results, status) { if (status == google.maps.GeocoderStatus.OK) { if (results[1]) { document.write(results[1].formatted_address); } else { alert("No results found"); } } else { alert("Geocoder failed due to: " + status); } }); } } prints out New York, NY 10012, USA

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >