Search Results

Search found 14694 results on 588 pages for 'zend controller router'.

Page 80/588 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• No Sound in 12.04 on Acer TimelineX 3830TG

  - by Fawkes5

  When i first installed ubuntu 12.04 everything worked fine. All of a sudden my sound has stopped working!! This has happened before [like 2 days ago], however the next day it started working again. That may happen again...[I've already rebooted 5 times] My Sound Card is a HDA intel PCH My Sound Chip is Intel CougarPoint HDMI My machine is an Acer TimelineX 3830TG, heres my lcpci output 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) I'm running a dual boot with Windows 7, sound always works there. I've tried loading earlier kernels [3.2.0 ] but that hasn't helped. I've tried playing with alsamixer, unmuting and raising volume, doesn't work I've tried playing with pauvcontrol, doesnt work. Althought, strangely, when i play a song, under output i can see a bar moving implying that something is working, just the sound isn't getting through my speakers. Thus it might be a hardware problem. I've tried unistalling and reinstalling pulsaudio annd alsamixer, doesn't work [maybe made it worse...]. I've heard reverting back to kernel 3.0... works, but i'm reluctant to try that[i dont know much about kernels]. Thank you. Please tell me what other information you need. EDIT: My audio has started working again after another reboot. However this time im not connected to my external audio on startup. I will see if this is the issue next time i'm at home Edit: Connecting to external audio is not the problem.

  Read the article

• Reverse ssh tunneling with Tomato

  - by Deivuh

  Since my ISP restricts some incoming connections, I can't access remotely to my home pc. What I'm trying to do is make a reverse ssh connection from my home's router with Tomato firmware to the office computer, so I can access remotely from the office with that open connection. What I'm doing is running the following from the router: ssh -R 12345:localhost:22 oUser@office Then I leave run top open to keep the connection alive. And from my office what I do is run the following: ssh hUser@localhost -p 12345 but I get the following message with verbose on: OpenSSH_5.5p1 Debian-6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [::1] port 19999. debug1: Connection established. debug1: identity file /home/oUser/.ssh/id_rsa type -1 debug1: identity file /home/oUer/.ssh/id_rsa-cert type -1 debug1: identity file /home/oUser/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: identity file /home/oUser/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host I've password remote access enabled in Tomato's configuration, so I should be able to access without having the public key on *authorized_keys*, but I've even tried adding it and still the same. I've done the same with my home's computer, and it does work perfectly, but it doesn't with the router. Am I doing something wrong? Thanks in advance.

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Can I attach a VPN firewall to an existing network and have it manage VPN connections?

  - by jules

  I'm quite new to networking and am trying to set up my first VPN connection. The Situation: I have been contracted for some programming at a facility some distance from my location. I would like to be able to set up a simple VPN connection to their network so that I may make adjustments without significant travel. Their Current Network: Six devices (one I need to connect to) plugged into a basic router (Dlink). This router has an internet connection and a static ip address. My Hopeful (questionable) Proposal: I attach a VPN Firewall I happen to own (Netgear FVS318) as device number seven on the client network. I disable routing / DHCP in the Netgear. I forward the appropriate IPSec ports from the Dlink to the Netgear. I then create a VPN connection on my office Windows 7 machine to the remote network. The request is forwarded from the Dlink to the Netgear where the VPN connection is authenticated. I now have a remote-access connection from my office PC to the client's local network. The Question: Will this proposal work? If not, would another possibility be to attach a computer with a VPN server to the client network? Also, as a note: the client has requested I not replace their router or place mine in-between theirs and the internet :( Thanks very much!

  Read the article

• Can I make two wireless routers communicate using the wireless?

  - by Dana Robinson

  I want to make a setup like this: cable modem <-cable- wireless router 1 <-wireless- wireless router 2 in another room <-cables- PCs in another room Basically, I want to extend my network access across the house and then have a bunch of network jacks available for my office PCs. Right now, I have a cable modem going to a wireless router in one room and a PC with a wireless PCI card in it in the office on the other side of the house. I use internet connection sharing with the other PCs in the office. The problem is that ICS is flaky, especially when I switch to VPN on the Windows box to access files at work. I picked up a wireless USB adapter that I thought I could share among the PCs I work on but I'm not very happy with it so I'm going to return it (NDISwrapper support for it is poor). Is this possible? My wireless experience so far has been pretty straightforward so I have no idea what kind of hardware is available. I've looked at network extenders but those just look like repeaters for signal strength. I want wired network jacks in my office.

  Read the article

• Mac Mini's internet very slow, every other device fine (PC, iPhone, Xbox 360)

  - by alex

  I recently haven't used my Mac Mini for about 5 days (however it was left on). I seem to be able to connect and get great download / upload speeds through my PC, Xbox 360, iPhone and parents' laptop. However, my Mac Mini is very slow. OS X's Mail.app is downloading mail at 0.4kbps and then dropping to 0. Skype file transfers are doing the same. Browsing the net is a terrible experience. It is taking 30 seconds or more to download basic pages. All of my devices connect wirelessly to a Netgear router / modem. I have tried giving the Mac Mini a manual IP, and renew DHCP lease, as well as flush DNS in Terminal. I have also rebooted the router / modem twice, and the Mac Mini twice. Do you know what could be causing this? Thanks Update This is very weird. It is also very slow accessing localhost (setup through MAMP) and also slow to access the Netgear router config pages.

  Read the article

• Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

  - by Mark C

  Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

  Read the article

• Why am I unable to reach local network computers, but able to browse the web?

  - by Igor Zinov'yev

  I have a weird problem. Today after turning my Ubuntu 9.10 PC on I can't connect to my local network, but I can use the Internet. We have a single Windows 2003 server machine that acts as a local main DNS server, DHCP server and a domain controller. Although it seems to give me the local IP address, I can not ping it, as well as any other machine on the net. I have tried all of the below and it didn't help: Rebooting; Reconnecting to the network; Forcing the dhclient to renew the IP address; Deleting and creating new connection profiles; Plugging my machine into another network outlet; Maybe it has something to do with routing, because I have tampered with routing tables the day before, but the tables seem ok to me: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 vboxnet0 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 Our LAN uses a D-Link DI-604 router, and it looks to me as if I am connected to the network outside the router. I can not even access its administration page. Please at least suggest what I can do to solve this. P.S. What seems strangest to me is that I can access the PC in question from outside the network by opening a port on the router. I have managed to ssh to it from outside, but I still can't ping nothing on the inside. P.P.S Today I tried reinstalling network-manager with --purge option, but it did no good. After that I created a new DCHP reservation for my PC in order to change my local IP, but that didn't change anything either. My PC is able to get a DHCP offer, but then it's unable to connect to any local computers. I am desperate.

  Read the article

• VMWare steals IP addresses

  - by Ishan Amin

  I'm having a peculiar problem, that I think I have narrowed down to VMware. For the past one year, every once in a while we lose internet connection and not all users (about 10 users) go down at the same time, its usually one-by-one. First someone will call me and say "Internet is down" and then we would go reset the router and modem and switch and it would be working again for a while, then go down again without any pattern or replicatable sequence. We'd go repeat the steps again to get everyone in the office running again. We called our Internet Service Provider and they constantly say, We see your modem and we see your router and from thier end everything is OK. we replaced our router and switch and modem, twice! Last friday, it dawned upon me, that everytime we turn on a VMware machine, this sequence of taking everyone down starts, which also explains the message that my users get for "IP Conflict Found" So we do alot of VMware testing and lo and behold, it takes my Internet down. My Yahoo and Gtalk would continue working but www is down when the VMware machines are started. I do use bridged networking to all the VMware machines, but I dont know what else to set it at. now, sorry for this long rambling but anyone have any clue on how to stop this? thanks IA

  Read the article

• Destination NAT Onto the Same Network from internal clients

  - by mivi

  I have a DSL router which acts as NAT (SNAT & DNAT). I have setup a server on internal network (10.0.0.2 at port 43201). DSL router was configured to "port forward" (or DNAT) all incoming connections to 10.0.0.2:43201. I created a virtual server for port forwarding on DSL router. I also added following iptables rules for port forwarding. iptables -t nat -A PREROUTING -p tcp -i ppp_0_1_32_1 --dport 43201 -j DNAT --to-destination 10.0.0.2:43201 iptables -I FORWARD 1 -p tcp -m state --state NEW,ESTABLISHED,RELATED -d 10.0.0.2 --dport 43201 -j ACCEPT # ppp_0_1_32_1 is routers external interface. # routers internal IP address is 10.0.0.1 and server is setup at 10.0.0.2:43201 Problem is that connections coming from external IP addresses are able to access internal server using External IP address, but internal clients (under NAT) are not able to access server using external IP address. Example: http://<external_address>:43201 is working from external clients But, internal clients are not able to access using http://<external_address>:43201 This seems to be similar to the problem described in http://www.netfilter.org/documentation/HOWTO/NAT-HOWTO-10.html (NAT HOW-TO Destination NAT Onto the Same Network). Firstly, I am not able to understand why is this a problem for internal clients? Secondly, what iptables rule will enable internal clients to access server using external IP address? Please suggest.

  Read the article

• Why does my DD-WRT not accept SSH connections from my laptop?

  - by Vlad Seghete

  So, here is my system: I have a 2Wire AT&T modem/router which I use for wireless and a Buffalo router flashed with DD-WRT which is physically attached to the 2Wire and set in the DMZ. I set everything up on the DD-WRT to be able to connect to it using ssh and also so that it forwards ssh requests on a different port to one of the servers behind it. Now, when I am physically connected to the DD-WRT all this works great and as I would want it to. I ssh into the two different ports using the WAN IP of my network, and I get where I expect to land. If, however, I am connected using wi-fi to the 2Wire, the same commands do not work. I do not get an error, simply a timeout. I have trouble understanding this, since the DD-WRT is set in the DMZ and everything should pass to it. To further complicate the problem, I tried connecting to the same IP using my phone (wireless disabled, so really from the WAN) and surprise, it works! If I go back on the local network by enabling the wifi, the ssh connection times out. To make this even stranger, my WAN IP address always responds to pings (meaning in all the above situations). What could be going on here? I know what I should do, completely disable the 2wire as a router and use it strictly as a modem and them use all the routing capabilities of the dd-wrt. It's what I will probably end up doing anyway, but my question remains, because I really want to know what is happening here.

  Read the article

• port forwarding problem

  - by Claudiu

  I want to set up an svn server on my computer, so it's available from anywhere. I think I set up the repository correctly, using CollabSVN. If I go to Repo-Browser with TortoiseSVN and point it to svn://localhost:3690, it shows the proper repository. The problem now is that I'm behind a router. My local IP is 192.168.1.45 . Doing svn://192.168.1.45:3690 also works. My global IP is, say, x.x.x.x. Just doing svn://x.x.x.x:3690 doesn't work, which makes sense, since I have to set up port forwarding. I'm using a Verizon router. Using their web interface (on 192.168.1.1) I added the following port forwarding rule: IP Address forward to: 192.168.1.45 Source Ports: Any Dest Ports: 3690 Forward to: 3690 Protocol: TCP However, even after applying this rule, going to svn://x.x.x.x:3690 doesn't work. It takes a few seconds to fail, then says that the connection couldn't be established because the server connected to didn't respond properly after a period of time. What's interesting is that a random port, like svn://x.x.x.x:36904 fails immediately, saying that the target machine actively refused the connection. So I figure that the forwarding rule did something, but not fully what was necessary. Any ideas on how to get this working? The router model is MI424-WR and the firmware version is 4.0.16.1.56.0.10.12.3. UPDATE: I also tried setting destination port to 45000, and still forwarding to 3690, in case something was wrong w/ the lower-numbered ports, but to no avail. I also tried port 80 to port 3690, still all in vain.

  Read the article

• Configuring network route between two routers on home network

  - by Paul

  I have a home network - the main router connected to the internet (and has wifi) is a Netopia box. Connected to it is a Linksys router. Everything currently works - I can connect via the wireless network and get to the internet. Machines connected to the Linksys can connect with each other and connect to the internet. Both routers are configured to serve addresses via DHCP (Netopia 192.168.1.1 - 192.168.1.99), Linksys (192.168.0.1 - 192.168.0.100). Here's how they are connected: Internet <-> Netopia w/wifi (192.168.1.254) <-> Linksys (192.168.0.1) I decided I really need to allow wireless connections to also communicate with machines behind the Linksys router. Currently the Linksys is configured to obtain an IP address via DHCP. I thought this would be straightforward. I configured the Linksys to have a static IP address: IP: 192.168.1.100 Mask: 255.255.255.0 GW: 192.168.1.254 Then I configured a static route on the Netopia: Network: 192.168.0.0 Mask: 255.255.255.0 GW: 192.168.1.100 So it should now look like this: Internet <-> Netopia w/wifi (192.168.1.254) <-> (192.168.1.100) Linksys (192.168.0.1) I reset both routers. I cannot ping the Netopia (192.168.1.254) from inside the Linksys network, and if I attempt to ping 192.168.0.1 from a wifi connection I get a "Destination host not available" error. Obviously I'm missing something, but I'm not sure where. Any ideas on what I'm missing?

  Read the article

• MacBook Air Keeps dropping Wi-Fi

  - by Robert Patrick

  So my MacBook Air keeps dropping Wi-Fi for some reason. It happens ONLY on my home network, and ONLY to my computer. I'm using a Linksys WRT54G router. I'm the only Mac on the network. Every other Wi-Fi network is perfectly fine, and every other computer on this network is fine. Many things can happen. It could say it's connected, but not be able to access the internet (whether it tells me that there's no internet access or not). It may just drop Wi-Fi altogether, and refuse to connect. Generally, if I unplug the router and plug it back in, it's all good. It also works if I restart my computer. This happens multiple times a day. Yesterday I did everything I know to get it to connect (restart router many times, restart my MacBook), and nothing worked. Eventually it just magically worked. How can I stop this from happening? We got a notice from Comcast a while ago saying that a bot called DNS Changer was detected on one or more machines on the network. I'm assuming that this can't be me, right?

  Read the article

• Cisco configuration for public library internet

  - by AlternateZ

  I'm a C/C++ computer programmer turned IT support guy working for a public library. My day is usually spent helping random grandparents learn how to use email, so my networking knowledge is limited to what I can glean from google. Here's the situation. We have a public library with 20 PCs on a LAN and also public wifi access. Previously we were running all of this on 1 ADSL connection and people complained about low speeds. We hired a networking company to set up a Cisco dual-WAN router for us, and purchased an additional ADSL connection. The intention was to give the LAN PCs a guaranteed amount of bandwidth each, and then let the wifi users split the rest. The results were far worse than what we expected, and all we got from the company was excuses and they've since washed their hands of us. During busy periods, net performance on the LAN PCs are so poor that attaching files to gmail etc often times out and fails - far from the "guaranteed amount of bandwidth each" that we hope for! Sometimes it feels like performance is worse than before when we had 1 ADSL link and an unconfigured router? Anyways, surely this is a problem encountered a million times over across the world? (Sharing internet across many users effectively.) What are standard solutions for something like this? I admit to not even knowing the right jargon to google for (load balancing?) I'd appreciate any links to resources/guides that might help me get a better understanding of the problem/solutions, and perhaps some stories of your own experience in solving similar problems. This will help us evaluate and negotiate with network consultants in the future. If its relevant, our router config contains a section "policy-map" with "bandwidth percent" for each class of user (LAN, wifi), and "fair queue".

  Read the article

• ddwrt client brigde acces point lost

  - by llazzaro

  Ok I have an AP with ddwrt firm (i know its not the best, but continue reading!) AP is configured to work like a wifi "transparent" brigde, also it had a virtual wifi network card to expand radius of wifi signal in that same AP. The brigde is working, computers behind AP gets ips from main routers which shares internet....BUT! I cant access webgui of the bridge AP... Main problem : AP is lost, but its working as brigde. I cant find it in the network (it didnt have any ip!) so I cant change any configuration... First solution : Reset AP, but it cannot be done. Reset button dont works due to a bug in ddwrt micro firm that mi linksys WAP54g had installed (I really hate this firmware I like more openwrt that my main router has) Second Solution : arp -a from main router , from computers behind AP...It dont appears in the list. Any more ideas, the router at some level must be there, the brigde is working. I know its possible that the AP is with an ip like 192.168.100.2 , my subnect actually is 172.16.X.X. :) thanks!

  Read the article

• Wireless Access Point stopped working

  - by Alex Pritchard

  I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

  Read the article

• Configuring two nearby WLANs: should I use the same ssid?

  - by Rory

  I'm configuring a home network for basic internet use (ie don't really need connectivity between workstations on the network). My brick walls mean a single wireless router doesn't provide good coverage throughout the house, so I have purchased two powerline adapters and now have the incoming modem/wireless router at one end of the house plugged into a powerline adapter, and at the other end of the house the other powerline adapter plugged into another wireless router. Currently the two wireless networks have different ssids. (The powerline adapters only do power-Ethernet; they're not wireless access points themselves.) This works well, except when I move between rooms and would ideally like my devices (iPad, phones, laptops) to switch from the weak to the strong signal. Sometimes there's enough signal that they hold on to the weak connects instead of switching to the strong one. Should I name the two networks the same ssid, and if so what is the actual effect? Do the signals get confused, is the bandwidth affected, will this help my devices seamlessly move from one to the other, or is the ssid just a cosmetic thing that actually doesn't have any impact on this situation? Are there any other settings that I should configure to make my setup optimal?

  Read the article

• Portforwarding Combine Several Ports

  - by kiraitachi

  Hi I got a Raspberry Pi at A.A.A.B in my local network and I have set up a DMZ on my router so that any incoming traffic that comes to my router gets redirected to my raspberry pi wich I can connect via NO-IP adress. The problem is that I want to set up portforwarding since i got several services running on my Pi like SSH, torrent webgui, webalbum, etc. I had this already done before long time ago, but I forgot a bit the syntax and cant get to set it up. Router Help says: The Application allows you to do port forwarding, but only have the ports open when data flowing out of the trigger ports. When a program sends data out on outgoing ports called trigger ports, the device then allows incoming data on the open ports specified in your port triggering configuration. 1.Trigger Port Start Trigger Port Start Specify the start port on the device that would trigger the device to open ports for incoming data. 2.Trigger Port End Specify the end port on the device that would trigger the device to open ports for incoming data. You can enter a port number the same as the trigger port start or enter a larger port number to specify a port range. 3.Trigger Traffic Protocol Type Select the trigger traffic type. Open Port Specify all the ports to be opened. It's content could be: A single port only. A port range only. Start open port number and end port number should be separated by "-" . Combined several single port and several port ranges. Each single port or port range should be separated by "," . Open Traffic Protocol Type Select the open traffic type. This are the fields: http://es.tinypic.com/view.php?pic=n5lv1k&s=8 I think this is the syntax 1-7999,8001-9090,9092-65535. But each time I want to add it gives me an error. Any ideas?

  Read the article

• DD-WRT RIP2 Router mode configuration

  - by Eduardo

  Can anybody tell me why my wireless router only redirects traffic to ADSL modem when it is on Gateway mode? These are the configurations when it is on RIP2 Router mode: ADSL Modem: ------------ LAN IP: 10.1.1.1 Subnet mask: 255.0.0.0 RIP v2 enabled in both directions Route: destination: 192.168.1.0 Subnet mask: 255.255.255.0 Gateway: 10.1.1.2 Wireless Router (DD-WRT) ------------------------ WAN IP: 10.1.1.2 WAN Subnet mask: 255.0.0.0 LAN IP: 192.168.1.1 LAN Subnet mask: 255.255.255.0 Operating mode: RIP2 Router Static Route: Destination LAN NET: 10.0.0.0 Subnet Mask: 255.0.0.0 Gateway: 10.1.1.1 Interface: LAN & WLAN

  Read the article

• Spring MVC Controller redirect using URL parameters instead of in response.

  - by predhme

  I am trying to implement RESTful urls in my Spring MVC application. All is well except for handling form submissions. I need to redirect either back to the original form or to a "success" page. @Controller @RequestMapping("/form") public class MyController { @RequestMapping(method = RequestMethod.GET) public String setupForm() { // do my stuff return "myform"; } @RequestMapping(method = RequestMethod.POST) public String processForm(ModelMap model) { // process form data model.addAttribute("notification", "Successfully did it!"); return "redirect:/form"; } } However as I read in the Spring documentation, if you redirect any parameters will be put into the url. And that doesn't work for me. What would be the most graceful way around this?

  Read the article

• Navigation (controller) in Tabbar (c) in Navigation (c) (iphone)

  - by Jonathan

  I want to have a TabBar controller inside a navigation controller. So that when an item is selected on the first Navigation Controller it pushes the TabBar into view. Inside this tabbar on the first tab is another navigation controller. However I only want one navigation bar. I've come up with 2 ways but not sure which way is better (Ie more acceptable etc)? 1) The first navigation controller isn't actually a navigation controller but to the user it looks like one. So when a cell is selected on it's table view the first navC's view is removed from the superview and the TabBarC's view is added, animation would have to be done manually. 2)The first NavC is actually a NavC and when an item is selected and the TabBar is pushed on to the screen the first NavC's navigationbar is hidden so that the first tab's navigationBar is the only nav bar on screen.

  Read the article

• RenderAction not finding action method in current controller in current area

  - by Andrew Davey

  I'm creating an ASP.NET MVC 2 (RTM) project that uses areas. The Index action of the Home controller of one area needs to use RenderAction to generate a sub-section of the page. The action called is also defined in the same Home controller. So the call should just be: <% Html.RenderAction("List") %> However, I get an exception: A public action method 'List' was not found on controller 'RareBridge.Web.Areas.Events.Controllers.HomeController'. Note that I'm not in the "Events" area! I'm in a completely different area. If I remove the "Events" home controller, then the exception still occurs but names a different controller (still not the one I want it to call). I've also tried providing the controller name and area to the RenderAction method, but the same exception occurs. What is going on here? BTW: I am using Autofac as my IoC container

  Read the article

• View controllers inside tab bar controller not auto-resizing on rotation

  - by Padawan

  (Correction: the view controllers are not auto-resizing instead of not auto-rotating.) In an iPad app, I have five regular view controllers (not navigation controllers or anything like that) inside a tab bar controller. The tab bar controller is just a plain UITabBarController declared in the app delegate. All the view controllers return YES in the shouldAutorotateToInterfaceOrientation method. On both the simulator and device, on rotation, the tab bar and the current view controller rotate but the currently selected view controller (call it A) does not resize properly. It keeps its portrait width and height (but it is rotated). If I switch to another view controller B and then back to A (without rotating the device again), A appears correctly resized. This happens with any of the five view controllers Why doesn't the currently selected view controller resize immediately on rotation and how do I fix it? Thanks.

  Read the article

• MVC: Model View Controller -- does the View call the Model?

  - by Gary Green

  I've been reading about MVC design for a while now and it seems officially the View calls objects and methods in the Model, builds and outputs a view. I think this is mainly wrong. The Controller should act and retrieve/update objects inside the Model, select an appropriate View and pass the information to it so it may display. Only crude and rudiementary PHP variables/simple if statements should appear inside the View. If the View gets the information it needs to display from the Model, surely there will be a lot of PHP inside the View -- completely violating the point of seperating presentation logic.

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >