Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 803/837 | < Previous Page | 799 800 801 802 803 804 805 806 807 808 809 810  | Next Page >

• Can't get MySQL to install

  - by James Marthenal

  I'd like to think I know what I'm doing in a Unix shell but maybe not. I made a mistake in a configuration file for MySQL, so I decided to just uninstall it and then reinstall it, so I did: sudo apt-get --purge remove mysql-server mysql-server-5.0 mysql-client The files were deleted, so I then tried to install it, but it didn't ask me for a root password or anything else, so I uninstalled it using the above command again and then did sudo rm -rf /etc/mysql sudo rm /etc/init.d/mysql sudo rm -rf /var/lib/mysql* I then restarted the computer then installed it again: sudo apt-get install mysql-server mysql-client It asked for a root password, and everything looked like it would work, until I saw this: $ sudo apt-get install mysql-server mysql-client Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: mysql-server-5.0 Suggested packages: tinyca The following NEW packages will be installed: mysql-client mysql-server mysql-server-5.0 0 upgraded, 3 newly installed, 0 to remove and 1 not upgraded. Need to get 0B/27.4MB of archives. After this operation, 86.7MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! mysql-server-5.0 mysql-client mysql-server Authentication warning overridden. Preconfiguring packages ... Can't exec "/tmp/mysql-server-5.0.config.28101": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/mysql-server-5.0.config.28101 configure failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 mysql-server-5.0 failed to preconfigure, with exit status 255 Selecting previously deselected package mysql-server-5.0. (Reading database ... 160284 files and directories currently installed.) Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.0.51a-24+lenny5_all.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.0.51a-24+lenny5_all.deb) ... Processing triggers for man-db ... Setting up mysql-server-5.0 (5.0.51a-24+lenny5) ... Stopping MySQL database server: mysqld. /var/lib/dpkg/info/mysql-server-5.0.postinst: line 144: /etc/mysql/conf.d/old_passwords.cnf: No such file or directory dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 Setting up mysql-client (5.0.51a-24+lenny5) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Now I can't seem to figure out what to do. I just want to get a clean MySQL installation at this point. I'm running the latest stable release of Debian. All help is appreciated—thanks! Edit: I looked at this similar question, which suggests that I uninstall mysql-common, but when I try to do so I see: The following packages will be REMOVED: apache2 apache2-mpm-prefork apache2-utils apache2.2-common git-svn libapache2-mod-php5 libapache2-mod-python libapache2-svn libaprutil1 libdbd-mysql-perl libdbd-mysql-rubygem libmysql-ruby libmysql-ruby1.8 libmysql-rubygem libmysqlclient15-dev libmysqlclient15off librdf-perl librdf0 libserf-0-0 libsvn-perl libsvn1 mysql-client-5.0 mysql-common mytop ndn-apache22-php5 ndn-apache22-svn ndn-interpreters ndn-lighttpd ndn-netsaint-plugins ndn-perl-modules ndn-php5-cgi ndn-php5-xcache ndn-php53 ndn-php53-suhosin ndn-rubygems php5 php5-mcrypt php5-mysql proftpd proftpd-mod-mysql python-django python-mysqldb python-subversion python-svn subversion subversion-tools trac zendoptimizer 0 upgraded, 0 newly installed, 48 to remove and 1 not upgraded. Eeek! Any suggestions?

  Read the article

• Can't install MySQL

  - by James Marthenal

  I have a Debian machine that I have previously installed MySQL on. In an attempt to delete it, I stupidly deleted the directories/files /etc/mysql/, /etc/init.d/mysql, /usr/lib/mysql/, /var/lib/mysql/. I then later did sudo apt-get purge mysql-server mysql-server-5.0. Now, when I try to install mysql-server, I get: $ sudo apt-get install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: mysql-server-5.0 The following NEW packages will be installed: mysql-server mysql-server-5.0 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/27.4MB of archives. After this operation, 86.6MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! mysql-server-5.0 mysql-server Authentication warning overridden. Preconfiguring packages ... Can't exec "/tmp/mysql-server-5.0.config.122781": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/mysql-server-5.0.config.122781 configure failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 mysql-server-5.0 failed to preconfigure, with exit status 255 Selecting previously deselected package mysql-server-5.0. (Reading database ... 158138 files and directories currently installed.) Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.0.51a-24+lenny5_all.deb) ... Processing triggers for man-db ... Setting up mysql-server-5.0 (5.0.51a-24+lenny5) ... Stopping MySQL database server: mysqld. 110206 19:31:13 [ERROR] /usr/sbin/mysqld: Can't find file: './mysql/user.frm' (errno: 13) 110206 19:31:13 [ERROR] /usr/sbin/mysqld: Can't find file: './mysql/user.frm' (errno: 13) ERROR: 1017 Can't find file: './mysql/user.frm' (errno: 13) 110206 19:31:13 [ERROR] Aborting 110206 19:31:13 [Note] /usr/sbin/mysqld: Shutdown complete /etc/init.d/mysql: WARNING: /etc/mysql/my.cnf cannot be read. See README.Debian.gz (warning). Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I have tried to search for a solution via Google and have found lots of suggestions for this problem, but ultimately it seems like the problem is that by deleting the files manually, I messed up the mysql-common package. I have tried to do sudo apt-get install --reinstall mysql-common followed by installing mysql-server, but it does the exact same thing. I previously had MySQL working great, I just want to get it back to that state. Thanks so much for your help.

  Read the article

• Windows 7 Boot to VHD using a VHD clone of the system drive

  - by daveh551

  This seems like a not too difficult problem, and, after several hurdles, I'm maddeningly close. But I can't quite get there. I'm running Windows 7 in development shop. I want to start using VS2010 to work on some stuff that won't be released for awhile. My boss said no beta code on the production machine, but I could run VS2010 for this project IF I could do it in an isolated environment, like a virtual PC. Well, I've used the beta and RC of Win7 on VPC's before, and it was painfully slow because of the VPC environment. But everyone has been singing the praises of Windows 7's boot-to-VHD capability, where only the disk is virtualized, and you're actually running on the hardware. Supposed to be little slower, but nowhere near the speed penalty of VPC. I've spent a fair amount of time getting everything installed the way I want it. So I figured, I'll just clone my system drive using Disk2VHD, and boot off of that, and then install VS2010 onto that. (I keep most of my user data, including all my projects, in a separate partition, so that wouldn't have to be duplicated and would still be available.) Well, I had some difficulties with that, owing mainly to the fact that I was using an old version of Disk2VHD - (get the latest if you're going to try it.) But I did finally get it to boot. (Scott Hanselman has a good blog post on boot to VHD). But it wasn't exactly what I was expecting or hoping for. What I expected was that the VHD would become the C: drive, and the original (physical) C: drive would be either hidden or mounted under a different letter, and thus isolated and protected from any changes. What you actually get is that the VHD becomes the D: drive AND you boot from the D: drive, BUT your original C: drive is still there. Which is sort of okay EXCEPT that the Registry on the VHD is a clone of the Registry on C: drive, and includes many hard-coded references to C:. So the result is that some things come from (and modify) D: (the VHD), but some things come from (and modify) C:. (If you open a cmd prompt and do a SET to look at your environment variables, you will see a mixture of D:\ and C:\ paths.) So I don't really have an isolated environment. Most importantly, %ProgramFiles% is still set to C:\Program Files. What I really need is a tool that can access the registry files on the mounted VHD AS FILES, not as registry entries, and do a global search and replace on all the C:\ in strings to D:. I haven't found such a program. (I've tried to do it with a program called Registry Replace, but, even when running as Administrator, there are certain entries that the Registry won't let you change.) Does anyone know of one? Or any other solution to my problem (other than starting from scratch with a clean VHD and installing Win7 and all my programs on it.)?

  Read the article

• Server 2003 R2 doesn't allow logon after a few days of uptime

  - by Bryan

  We have a server 2003 R2 standard (which I'll refer to as SRV01) that's knocking on a bit now, but it still acts as a file, print and SQL server on our company's network. SRV01 hosts user profiles, home directories and pretty much all our business data. Note our AD is currently at 2008 R2 level. This server is due to be upgraded in the next 12 months, but I've no budget to spend on it just yet. A bit of history of this server follows: When SRV01 was first commissioned, it acted as a domain controller (with the same 2003 R2 install it has today), paired with another server that ran Server 2003 R2 SBS. A few years ago, we purchased a pair of dedicated DCs (2008 R2) and at this point we decommissioned the 2003 SBS server, and SRV01 was DCPROMOed out of the AD. Up until very recently, SRV01 used to run Exchange 2003, however we've recently purchased a dedicated server for Exchange 2010 and upgraded (following Microsoft recommended upgrade path). Exchange 2003 was recently uninstalled. - Cleanly to the best of my knowledge. Ever since Exchange was removed from SRV01, I'm finding that after a few days of uptime, when I attempt to logon, pressing CTRL-ALT-DEL just hides the Welcome to Windows Server 2003 banner, and never presents the logon dialog. All I see is a moveable mouse pointer and a blank background. It's a similar story with an admin TS session, the RDP client connects and gives me a blank background, but no logon dialog is presented. The RDP session indefinitely hangs until I give up and close it. The only way I've been able to gain access to the server is to pull the plug on it. Whilst the server does have a battery backed up RAID 5 controller, I'm unhappy about having to do this, so as a temporary measure, I've created a scheduled job to reboot SRV01 each night. Not only do I not like the idea of scheduling a reboot of a server like this, but it is also causing problems for users that leave desktop PCs left logged on overnight. Users complain of 'Delayed Write Failures', and there has also been a number of users that have started to complain about account lockout problems, as well as users not able to connect to shares on SRV01 until they reboot their desktop PCs. I've examined event logs on SRV01 and on the DCs looking for clues as to what the problem is, but there really is nothing untoward being logged. How could I being to investigate this problem when nothing of any relevance is being logged? Is there some additional logging that can be enabled that might give some clues as to what could be causing this problem? Could performance monitor help me out here, and if so, what counters would you consider monitoring? It's worth mentioning that whilst the server is unresponsive via the console and TS, it does still respond to clients connecting to shares without problems for several days, but after about a week I then start to hear users reporting problems accessing shares, but this seems quite sporadic. I've also tried leaving the console logged on (and locked), when I notice I can no longer logon via TS, I can unlock the server console without problem, but it refuses to reboot/shutdown, and subsequent attempts to reboot report that a system shutdown is already in progress and the system then completely hangs. I've tried playing the waiting game for several hours thinking that a timeout might allow the shutdown to continue, but to no avail.

  Read the article

• Squid w/ SquidGuard fails w/ "Too few redirector processes are running"

  - by DKNUCKLES

  I'm trying to implement a Squid proxy in a quick and easy fashion and I'm receiving some errors I have been unable to resolve. The box is a pre-made appliance, however it seems to fail on launch.The following is the cache.log file when I attempt to launch the squid service. 2012/11/18 22:14:29| Starting Squid Cache version 3.0.STABLE20-20091201 for i686 -pc-linux-gnu... 2012/11/18 22:14:29| Process ID 12647 2012/11/18 22:14:29| With 1024 file descriptors available 2012/11/18 22:14:29| Performing DNS Tests... 2012/11/18 22:14:29| Successful DNS name lookup tests... 2012/11/18 22:14:29| DNS Socket created at 0.0.0.0, port 40513, FD 8 2012/11/18 22:14:29| Adding nameserver 192.168.0.78 from /etc/resolv.conf 2012/11/18 22:14:29| Adding nameserver 8.8.8.8 from /etc/resolv.conf 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'bin' processes 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| ipcCreate: /opt/squidguard/bin: (13) Permission denied 2012/11/18 22:14:29| helperOpenServers: Starting 5/5 'squid-auth.pl' processes 2012/11/18 22:14:29| User-Agent logging is disabled. 2012/11/18 22:14:29| Referer logging is disabled. 2012/11/18 22:14:29| Unlinkd pipe opened on FD 23 2012/11/18 22:14:29| Swap maxSize 10240000 + 8192 KB, estimated 788322 objects 2012/11/18 22:14:29| Target number of buckets: 39416 2012/11/18 22:14:29| Using 65536 Store buckets 2012/11/18 22:14:29| Max Mem size: 8192 KB 2012/11/18 22:14:29| Max Swap size: 10240000 KB 2012/11/18 22:14:29| Version 1 of swap file with LFS support detected... 2012/11/18 22:14:29| Rebuilding storage in /opt/squid3/var/cache (DIRTY) 2012/11/18 22:14:29| Using Least Load store dir selection 2012/11/18 22:14:29| Set Current Directory to /opt/squid3/var/cache 2012/11/18 22:14:29| Loaded Icons. 2012/11/18 22:14:29| Accepting HTTP connections at 10.0.0.6, port 3128, FD 25. 2012/11/18 22:14:29| Accepting ICP messages at 0.0.0.0, port 3130, FD 26. 2012/11/18 22:14:29| HTCP Disabled. 2012/11/18 22:14:29| Ready to serve requests. 2012/11/18 22:14:29| Done reading /opt/squid3/var/cache swaplog (0 entries) 2012/11/18 22:14:29| Finished rebuilding storage from disk. 2012/11/18 22:14:29| 0 Entries scanned 2012/11/18 22:14:29| 0 Invalid entries. 2012/11/18 22:14:29| 0 With invalid flags. 2012/11/18 22:14:29| 0 Objects loaded. 2012/11/18 22:14:29| 0 Objects expired. 2012/11/18 22:14:29| 0 Objects cancelled. 2012/11/18 22:14:29| 0 Duplicate URLs purged. 2012/11/18 22:14:29| 0 Swapfile clashes avoided. 2012/11/18 22:14:29| Took 0.02 seconds ( 0.00 objects/sec). 2012/11/18 22:14:29| Beginning Validation Procedure 2012/11/18 22:14:29| WARNING: redirector #1 (FD 9) exited 2012/11/18 22:14:29| WARNING: redirector #2 (FD 10) exited 2012/11/18 22:14:29| WARNING: redirector #3 (FD 11) exited 2012/11/18 22:14:29| WARNING: redirector #4 (FD 12) exited 2012/11/18 22:14:29| Too few redirector processes are running FATAL: The redirector helpers are crashing too rapidly, need help! Squid Cache (Version 3.0.STABLE20-20091201): Terminated abnormally. CPU Usage: 0.112 seconds = 0.032 user + 0.080 sys Maximum Resident Size: 0 KB Page faults with physical i/o: 0 Memory usage for squid via mallinfo(): total space in arena: 2944 KB Ordinary blocks: 2857 KB 6 blks Small blocks: 0 KB 0 blks Holding blocks: 1772 KB 8 blks Free Small blocks: 0 KB Free Ordinary blocks: 86 KB Total in use: 4629 KB 157% Total free: 86 KB 3% The "permission denied" area is where I have been focusing my attention with no luck. The following is what I've tried. Chmod'ing the /opt/squidguard/bin folder to 777 Changing the user that squidguard runs under to root / nobody / www-data / squid3 Tried changing ownership of the /opt/squidguard/bin folder to all names listed above after assigning that user to run with squid. Any help with this would be greatly appreciated.

  Read the article

• Hosting a subversion working copy in an remote WebDAV folder

  - by Daniel Baulig

  This might be a bit awkward, but I'll try to explain what I am trying to achieve and what problems I encountered. First of all: whats this about? I am currently trying to set up a distributed working enviroment for developing a web page. My plan was to setup a SVN repository for version control, a live server where the actual live page ist hosted and a development server where I can work on the page. To ease things I intended to not have a local copy of the project on my disk, but to actually work directy on the files, that the development server hosts. For that I setup a WebDAV directory, under devserver.com/workspace, that actually mapped to files served under devserver.com/. So I could connect to devserver.com/workspace, change something and view the results live at devserver.com/. So far this worked perfectly. The next step was to create a SVN repository that would take care of my version control. I intended to be able to checkin to the reposiroty from my development server and at any time, with a small shell script, deploy any revision from the svn to the live server by checking out a copy of the revision into the live server directories. The second part, checking out into the live server, also worked perfectly. The first part though is where problems arose: My workstation is a Windows 7 machine. I connected to the WebDAV share using Windows built-in WebDAV support, which worked quite well. I can create, move, delete, edit, whatever files on my WebDAV share from my Windows machine perfectly. The next step was to checkout a working copy from the SVN (actually hosted at devserver.com/subversion/) into the WebDAV share. In the first try I used the Eclipse plugin subversive. The actual checkout worked fine and I can update and commit stuff to the repository, however, I cannot add any files to the ignore list. It always brings me an error. So I tried the same thing with a complete fresh repository using TortoiseSVN - and again it failed with the same errors. Here is what it says when trying to add files to svnignore: Some of selected resources were not added to ignore. svn: Cannot rename file '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props.66fd8936-2701-0010-bb76-472f0b56a5d1.tmp' to '\\devserver.com@SSL\DavWWWRoot\workspace\.svn\tmp\dir-props' This is what apache2 tells me, when I try to add a file to svnignore: [Sun Mar 07 03:54:19 2010] [error] [client xxx.xxx.xxx.xxx] Negotiation: discovered file(s) matching request: /var/www/devserver.com/.svn/tmp/dir-props (None could be negotiated). [Sun Mar 07 03:54:31 2010] [error] [client xxx.xxx.xxx.xxx] (20)Not a directory: The URL contains extraneous path components. The resource could not be identified. [400, #0] Actually both messages are repeated several times. The first one occurs first and is repeated about 5 times and the second comes there after and is repeated propably more than 20 times. If I create a regular file, delete, rename or modify it none of those messages appear in my error.log While writing this question now I was able to add fils to svnignore using TortoiseSVN. However, after that, Eclipse would not let me commit anymore. The error that used to pop up when adding files to svnignore now also shows up while commiting. While searching the web I found some people having this same message appearing because they had files only different in upper- / lower-case naming. I checked my repository and did not find such files. I also read somewhere about people having troubles with WebDAV and file locking, because WebDAV's file locking capabilities seem to be very limited. At some stage I got errors telling me my repository was locked and thus the operations could not be completed. This error though did not appear anymore, since I setup a completely fresh repository and working copy. I would really appreciate any help anyone can provide me in fixing this problem! If there are any more questions feel free to ask. I know this is a somewhat unusual setup. Best regards, Daniel

  Read the article

• Tomcat running, catalina throwing exception

  - by Mark Steudel

  So I have to preface that I'm not familiar with tomcat/catalina, but trying to troubleshoot this anyway. Anyway I see in /var/log/tomcat5/catalina.out I'm seeing these errors: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) I'm not really sure what this means. This installation was working a week ago ... did something get corrupted? How would I figure if it did ... what other information would be valuable here? Tomcat seems to be running and starting up fine ... UPDATE: this might be related: Jun 19, 2011 11:00:25 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-9080 Jun 19, 2011 11:00:26 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina log4j:ERROR LogMananger.repositorySelector was null likely due to error in class reloading, using NOPLoggerRepository. Some more stuff in the logs: 2011-06-12 23:04:45,223 INFO [main] [com.atlassian.confluence.lifecycle] contextInitialized Starting Confluence 3.1.1 (build #1724) 2011-06-12 23:04:45,663 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapContext.xml] 2011-06-12 23:04:46,134 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [setupContext.xml] 2011-06-12 23:04:46,236 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapCacheContext.xml] 2011-06-12 23:04:47,571 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Initialising the plugin system 2011-06-12 23:04:48,338 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Plugin system started in 0:00:00.748 Jun 12, 2011 11:05:05 PM org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:525) at java.net.Socket.connect(Socket.java:475) at java.net.Socket.<init>(Socket.java:372) at java.net.Socket.<init>(Socket.java:186) at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:395) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:344) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:435) Jun 12, 2011 11:05:44 PM org.apache.catalina.core.AprLifecycleListener lifecycleEvent INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.pa th: /usr/java/jdk1.6.0_18/jre/lib/i386/client:/usr/java/jdk1.6.0_18/jre/lib/i386:/usr/java/jdk1.6.0_18/jre/../lib/i386:/usr/java/packag es/lib/i386:/lib:/usr/lib CLEAN LOG OUTPUT FROM STARTING TOMCAT: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) So I did a /etc/rc.d/init.d/tomcat status and I get this: [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status /etc/rc.d/init.d/tomcat5 is stopped [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 start Starting tomcat5: [ OK ] [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status lock file found but no process running for pid 30774

  Read the article

• SQL Server Issue: Could not allocate space for object ... primary filegroup is full

  - by Luke

  Trying to figure out a problem at an office that has SQL Server 2005 installed on Windows SBS Server 2008. Here's the setup: It's an office, and the person who set this all up is nowhere to be found. I'm the best hope they have... One of the programs they use on a workstation gives them an error of "Could not allocate space for object 'Billing' in database "MyDatabase" because primary filegroup is full" when trying to save an entry in their software. I searched around for hours, looking for possible solutions. One was to check for available disk space, and another was to defrag. I checked the hard drives on the server, and there is plenty of space free. I also defragged, which may have helped the problem somewhat. It's hard to say, because it seems like with the nature of the error, if you try over and over you might get it to actually save. My next step was to try to see if autogrowth was enabled on the database. This would seem to be a likely / possible solution, but I can't access the database! If I run the SQL Management Studio, I can log in as my Windows user and view the list of databases. However, if I try to do anything (actually view the database, view the properties, add or edit users), I get errors that I don't have permission. For what it's worth, I also tried runing Management Studio as Administrator, in case that would help. No difference, though. Now, what I'm guessing is going on -- from my limited knowledge of SQL and from reading online -- is that though I'm logged in as a Windows administrator, that account does NOT have SQL access. I do see a list of SQL users, including SA, but I again don't have permission to add one or to change the password on an existing one. And nobody at the office has any idea what the SQL passwords could be. So... here's my thinking thus far: 1 - The "Could not allocate" error likely points to a database that needs to be allowed to autogrow. Especially since I verified there is plenty of free space and the HD has been defragmented. 2 - Enabling autogrow would be very easy to do if I had the proper access within SQL Management Stuido. That leads me to this link: http://blogs.technet.com/b/sqlman/archive/2011/06/14/tips-amp-tricks-you-have-lost-access-to-sql-server-now-what.aspx It sounds like it's a step-by-step guide for giving me the access I need to SQL. I'm guessing that if I followed this guide, I would be able to then log in to the SQL server via Management Studio with the proper permissions, and would be able to enable autogrow (or simply view the status of the existing database), and hopefully solve the "Could not allocate space" problem! So I guess I have a few questions: 1 - Would you guys agree with my "diagnosis"? Think I'm barking up the right tree? 2 - Is there any risk at all in hurting / disabling / wrecking the current SQL database or setup with me going through the guide to regain SQL access? I understand that per the guide, I would have to temporarily shut down SQL, so obviously it wouldn't be accessible during that time. But it wouldn't be worth the risk if there's a chance I could mess anything up... Like I said, the workstations ARE currently accessing the database somehow, but nobody knows with what login info or anything. Basically, it's set up, it works (usually), but if they had to reload the software, nobody would know how. Any feedback would be appreciated!! The problem is such that it's not an emergency for them, but an annoyance. If I could fix it, it would be wonderful. But if not, I think they'll manage, especially as they are going to eventually stop using this software. Thank you so much for your time! Luke

  Read the article

• Integrating HP Systems Insight Manager into an existing environment

  - by ewwhite

  I'm working with an environment that spans multiple data centers/sites and consists primarily of HP ProLiant servers (G5-G7) running Linux. The mix is 30% RHEL/CentOS, the rest are Gentoo :(. I also have a few dozen virtual machines running back-office and Windows servers on VMWare ESX hosts. I run OpenNMS to pull SNMP data from the various server nodes and networking devices. While OpenNMS works wonderfully for up/down, thresholds and notifications, it's native handling of traps is a little rough and the graphs are not particularly pretty. I use Orca/RRD graphs for performance trending and nice graphs. I'm tasked with inventorying the environment and wanted to come up with a clean way to organize server information. Since my environment is mostly HP, I've been playing with HP Systems Insight Manager as a way to extract server data and to deploy HP health/monitoring packages and firmware. The Gentoo systems eventually have to be converted to CentOS, so getting a quick assessment of what hardware is where would be great. Although I've read through a few hundred pages of HP manuals, I'm having a difficult time understanding how to get HP SIM to do what I want, though. My main problems are: I have about 40 subnets to deal with; 98% connected with private lines to facilities across the globe. I don't want to initiate an HP SIM discovery only to pull back every piece of intermediate networking hardware and equipment from all of the locations. I'd like this to focus on the servers. I have OpenNMS configured to accept traps. I don't want HP SIM to duplicate that effort. It seems like the built-in software deployment tool wants to overwrite the trapsink parameters for the systems it encounters during discovery. I have about 10 administrative username/password combinations in use across this infrastructure. Is there a more efficient way to get HP SIM to do the discovery or break discovery into manageable chunks? In terms of general workflow, do people typically install the HP Management Agents during the initial OS deployment (e.g. kickstart post script) or afterwards from HP SIM? Is HP SIM too thick/fat to be an inventory tool? I can't tell if it's meant to be used standalone or alongside other monitoring products. Since the majority of the systems I'm trying to track are those running Gentoo (in order to plan the move to CentOS), is there any way for HP SIM to extract system model information from them ( like dmidecode)? I have systems here where I may have an SSH key established, but not direct user or login access. Is there a way for me to import an SSH private/public key pair into HP SIM to reach out to the servers that can't accept standard credentials? There are a handful of sites where I have inconsistent access or have a double-NAT situation. I may be able to poke a server, but it may not be able to find its way back to the management system. Is there a workaround for this? The certificate configuration for HP SIM seems complicated. What is the preferred setup for trust between systems? I'd also appreciate any notes or recommendations to using this product. Or if there's a better way to do this, I'd like to know.

  Read the article

• PC: Quick Freeze, then BSOD, then forced reboot, then freezes again

  - by cr0z3r

  Lately I have been experiencing a weird issue. My PC will hang for a second and then BSOD - it stays there, so I have to reboot. Once Windows starts again and I'm logged in, after 1-10min it freezes again, this time without BSOD. RECAP: 1 second freeze BSOD, hangs there I have to force-reboot Once PC rebooted, I log back into Windows second freeze between a 1-10min range, no BSOD (alternatively, I get a freeze with a constant sound/noise, no BSOD) I contacted my PC provider, who told me my graphics-card might be flawed (Quadro 4000), so I used a Quadro 2000 that they lend me. The issue still occurred. The issue now seemed to belong to a flawed RAM module. Following my provider's steps, I removed all but the first from the left column and kept using my PC for a week or so without any issues. I then added the bottom-right module, and so on, until all modules were back inside - I had no problems. Now it seemed that a simple take-out-put-back-in of the RAM modules had fixed the issue. However, after a few months, the issue was back. I redid all the RAM-swapping I had done before, and concluded that the lower-right module was flawed. My provider changed it for another, and everything was great until now. My PC froze again for barely a second, hanged on a BSOD, I rebooted it, logged-in to Windows to get a freeze (without BSOD or reboot) 40 seconds later. Something worth noting, is that every time I reboot after the BSOD, it is something within Chrome that freezes my PC (e.g. this time I clicked the "restore" button as Chrome mentioned it had exited unexpectedly - from the previous freeze obviously - and it instantly froze). Finally, the Event Viewer lists 2 critical events in the past hour as "ID: 41, Type: Kernel-Power". PC-Specs: http://i.imgur.com/VZpbr.jpg Previous Dump-files: https://dl.dropbox.com/u/716600/DumpFiles_08_2012.zip I would like to thank anybody in advance for your help. You're great. UPDATE 1: I realized that I did not mention an awkward fact about this issue. After I have gotten the 1-sec freeze followed by a BSOD, after I rebooted because the BSOD hanged, and after I logged back in to get another (this time, eternal) freeze and rebooted once again, the PC does not boot back up. The power-light is on, but my monitor says "no signal", as if the PC wouldn't really be turned on. This truly seems a like a power-related issue, doesn't it? UPDATE 2: I just got a freeze, but without BSOD. My screen froze (while on Chrome, which is starting to seem suspicious to me) with an ongoing sound/noise. I had to force-reboot my PC. I would say this is a graphics-card issue, but this issue also happened when I was using the Quadro 2000 from my provider. UPDATE 3: I just got a BSOD while trying to render something (quite heavy, actually) in 3ds Max 2012. I left the BSOD "running", as it said it was writing dump files to disk. However, the percentage number stayed at 0, so after 15 minutes I force-rebooted. I then used the software WhoCrashed (thank you Dave) which reported the following from the C:\Windows\Memory.dmp file: On Thu 22.11.2012 22:13:45 GMT your computer crashed crash dump file: C:\Windows\memory.dmp uptime: 01:05:27 This was probably caused by the following module: Unknown () Bugcheck code: 0x124 (0x0, 0xFFFFFA80275AC028, 0xF200001F, 0x100B2) Error: WHEA_UNCORRECTABLE_ERROR Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA). This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue. A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: Unknown . Google query: Unknown WHEA_UNCORRECTABLE_ERROR

  Read the article

• django, mod_wsgi, MySQL High CPU - Problems

  - by Red Rover

  I am having a problem with an OSQA site. It is Django/Apache/mod_wsgi configured site. Every hour, the CPU spikes to 164% (Average) for task HTTPD. After 10 minutes, it frees back up. I have reviewed the logs, cron tables, made many config changes, but cannot track this problem down. Can someone please look at the information below and let me know if it is a configuration problem, or if anyone else has experienced this issue. Running TOP shows HTTPD using 165% of CPU VMware performance monitor also displays spikes. This happens every hour for 10 minutes. I have the following information from server status Server Version: Apache/2.2.15 (Unix) DAV/2 mod_wsgi/3.2 Python/2.6.6 Server Built: Feb 7 2012 09:50:15 Current Time: Sunday, 10-Jun-2012 21:44:29 EDT Restart Time: Sunday, 10-Jun-2012 19:44:51 EDT Parent Server Generation: 0 Server uptime: 1 hour 59 minutes 37 seconds Total accesses: 1088 - Total Traffic: 11.5 MB CPU Usage: u80.26 s243.8 cu0 cs0 - 4.52% CPU load .152 requests/sec - 1682 B/second - 10.8 kB/request 4 requests currently being processed, 11 idle workers ....._..........__......W....................................... ...................................C._..._....._L__._L_._....... ...................... Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process Srv PID Acc M CPU SS Req Conn Child Slot Client VHost Request 0-0 - 0/0/34 . 0.42 327 17 0.0 0.00 0.67 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 1-0 - 0/0/22 . 0.31 339 32 0.0 0.00 0.26 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 2-0 - 0/0/22 . 0.65 358 10 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 3-0 - 0/0/31 . 1.03 378 31 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 4-0 - 0/0/20 . 0.45 356 9 0.0 0.00 0.31 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 5-0 18852 0/16/34 _ 0.98 27 18120 0.0 0.37 0.62 69.180.250.36 osqa.informs.org GET /questions/289/what-is-the-difference-between-operations-re 6-0 - 0/0/32 . 0.94 309 29 0.0 0.00 0.64 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 7-0 - 0/0/31 . 1.15 382 32 0.0 0.00 0.75 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 8-0 - 0/0/21 . 0.28 403 19 0.0 0.00 0.20 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 9-0 - 0/0/32 . 1.37 288 16 0.0 0.00 0.60 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 10-0 - 0/0/33 . 1.72 383 16 0.0 0.00 0.40 127.0.0.1 osqa.informs.org OPTIONS * HTTP/1.0 I am running Django 1.3 This is a mod_wsgi configuration and copied is the wsgi.conf file: <IfModule !python_module> <IfModule !wsgi_module> LoadModule wsgi_module modules/mod_wsgi.so <IfModule wsgi_module> <Directory /var/www/osqa> Order allow,deny Allow from all #Deny from all </Directory> WSGISocketPrefix /var/run/wsgi WSGIPythonEggs /var/tmp WSGIDaemonProcess OSQA maximum-requests=10000 WSGIProcessGroup OSQA Alias /admin_media/ /usr/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/contrib/admin/media/ Alias /m/ /var/www/osqa/forum/skins/ Alias /upfiles/ /var/www/osqa/forum/upfiles/ <Directory /var/www/osqa/forum/skins> Order allow,deny Allow from all </Directory> WSGIScriptAlias / /var/www/osqa/osqa.wsgi </IfModule> </IfModule> </IfModule> This is the httpd.conf file Timeout 120 KeepAlive Off MaxKeepAliveRequests 100 MaxKeepAliveRequests 400 KeepAliveTimeout 3 <IfModule prefork.c> Startservers 15 MinSpareServers 10 MaxSpareServers 20 ServerLimit 50 MaxClients 50 MaxRequestsPerChild 0 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> We are using MySQL The server is an ESX4i, configured for the VM to use 4 CPUs and 8 GB Ram. Hyper threading is enabled, 2 physical CPU's, with 4 Logical. the CPU are Intel Xeon 2.8 GHz. Total memory is 12GB

  Read the article

• Prevent auto mounting Android sdcard under Linux Mint

  - by BullShark

  I recently obtained an older Android phone, so that I could test Android Apps on it. I've needed it because I have a Nexus 7 but not older Android versions, hardware, etc. to test on. I'm having a problem with it under Linux Mint with Cinnamon. When I plug the phone in, or remove and plug the sdcard from the phone back to it while the phone is plugged in, Linux automatically mounts the sdcard. This is a problem because once it is mounted under Linux, it dismounts from the phone running Android 2.3.5, and I can no longer test Android Apps I write that require the sdcard to be present, writable. I went to Menu System Tools System Settings System Details Removable Media, and it brings up this window. I have changed the settings to always "Ask what to do" on "Select how media should be handled". However, the sdcard still gets mounted and then I am asked how I want to open these files (media players, photo importers, file browser, etc.). If I click the checkbox for "Never prompt or start programs on media insertion", then the sdcard is mounted, and I am not asked how to open these files. Eject is just a noob word for Ubuntu users that means umount (unmount) like "Adminstrator" is another ubuntu noob word for the root user. And if I unmount the sdcard, the phone doesn't recognize it again until I take the sdcard out and plug it back in. The phone sees it for a brief moment until Linux Mint takes it over. There are 2 possible solutions and maybe more: 1) Prevent Linux from automounting sdcards some how 2) Tell Android not to allow the computer it is plugged into to take over the sdcard, HOW? Edit: I found out how to prevent the sdcard from being automatically mounted: Now it gets recognized by Linux: bullshark@beastlinux ~ $ dmesg | tail -n 25 [597212.218323] sd 21:0:0:0: [sde] Attached SCSI removable disk [597212.218639] sr 21:0:0:1: Attached scsi CD-ROM sr2 [597212.218910] sr 21:0:0:1: Attached scsi generic sg7 type 5 [597217.139373] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597217.140726] sd 21:0:0:0: [sde] No Caching mode page present [597217.140735] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.143595] sd 21:0:0:0: [sde] No Caching mode page present [597217.143602] sd 21:0:0:0: [sde] Assuming drive cache: write through [597217.152240] sde: sde1 [597389.751008] 4:2:1: cannot get freq at ep 0x84 [597390.238742] 4:2:1: cannot get freq at ep 0x84 [597624.903132] sde: detected capacity change from 1977614336 to 0 [597637.677763] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597637.679616] sd 21:0:0:0: [sde] No Caching mode page present [597637.679626] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.682508] sd 21:0:0:0: [sde] No Caching mode page present [597637.682515] sd 21:0:0:0: [sde] Assuming drive cache: write through [597637.692758] sde: sde1 [597661.857979] sde: detected capacity change from 1977614336 to 0 [597688.775455] sd 21:0:0:0: [sde] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB) [597688.776814] sd 21:0:0:0: [sde] No Caching mode page present [597688.776823] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.780055] sd 21:0:0:0: [sde] No Caching mode page present [597688.780062] sd 21:0:0:0: [sde] Assuming drive cache: write through [597688.788639] sde: sde1 bullshark@beastlinux ~ $ However, the phone still unmounts the sdcard upon being detected by Linux. Linux detects but does not mount, and a few seconds later: Edit #2 (Solution): I solved this one by changing the usb connection type (was usb mass storage) :

  Read the article

• High Load mysql on Debian server

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ?

  Read the article

• apache+mod_wsgi configuration for django project(s) on a quad core

  - by Stefano

  I've been experiment quite some time with a "typical" django setting upon nginx+apache2+mod_wsgi+memcached(+postgresql) (reading the doc and some questions on SO and SF, see comments) Since I'm still unsatisfied with the behavior (definitely because of some bad misconfiguration on my part) I would like to know what a good configuration would look like with these hypotesis: Quad-Core Xeon 2.8GHz 8 gigs memory several django projects (anything special related to this?) These are excerpts form my current confs: apache2 SetEnv VHOST null #WSGIPythonOptimize 2 <VirtualHost *:8082> ServerName subdomain.domain.com ServerAlias www.domain.com SetEnv VHOST subdomain.domain AddDefaultCharset UTF-8 ServerSignature Off LogFormat "%{X-Real-IP}i %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-agent}i\"" custom ErrorLog /home/project1/var/logs/apache_error.log CustomLog /home/project1/var/logs/apache_access.log custom AllowEncodedSlashes On WSGIDaemonProcess subdomain.domain user=www-data group=www-data threads=25 WSGIScriptAlias / /home/project1/project/wsgi.py WSGIProcessGroup %{ENV:VHOST} </VirtualHost> wsgi.py import os import sys # setting all the right paths.... _realpath = os.path.realpath(os.path.dirname(__file__)) _public_html = os.path.normpath(os.path.join(_realpath, '../')) sys.path.append(_realpath) sys.path.append(os.path.normpath(os.path.join(_realpath, 'apps'))) sys.path.append(os.path.normpath(_public_html)) sys.path.append(os.path.normpath(os.path.join(_public_html, 'libs'))) sys.path.append(os.path.normpath(os.path.join(_public_html, 'django'))) os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi _application = django.core.handlers.wsgi.WSGIHandler() def application(environ, start_response): """ Launches django passing over some environment (domain name) settings """ application_group = environ['mod_wsgi.application_group'] """ wsgi application group is required. It's also used to generate the HOST.DOMAIN.TLD:PORT parameters to pass over """ assert application_group fields = application_group.replace('|', '').split(':') server_name = fields[0] os.environ['WSGI_APPLICATION_GROUP'] = application_group os.environ['WSGI_SERVER_NAME'] = server_name if len(fields) > 1 : os.environ['WSGI_PORT'] = fields[1] splitted = server_name.rsplit('.', 2) assert splitted >= 2 splited.reverse() if len(splitted) > 0 : os.environ['WSGI_TLD'] = splitted[0] if len(splitted) > 1 : os.environ['WSGI_DOMAIN'] = splitted[1] if len(splitted) > 2 : os.environ['WSGI_HOST'] = splitted[2] return _application(environ, start_response)` folder structure in case it matters (slightly shortened actually) /home/www-data/projectN/var/logs /project (contains manage.py, wsgi.py, settings.py) /project/apps (all the project ups are here) /django /libs Please forgive me in advance if I overlooked something obvious. My main question is about the apache2 wsgi settings. Are those fine? Is 25 threads an /ok/ number with a quad core for one only django project? Is it still ok with several django projects on different virtual hosts? Should I specify 'process'? Any other directive which I should add? Is there anything really bad in the wsgi.py file? I've been reading about potential issues with the standard wsgi.py file, should I switch to that? Or.. should this conf just be running fine, and I should look for issues somewhere else? So, what do I mean by "unsatisfied": well, I often get quite high CPU WAIT; but what is worse, is that relatively often apache2 gets stuck. It just does not answer anymore, and has to be restarted. I have setup a monit to take care of that, but it ain't a real solution. I have been wondering if it's an issue with the database access (postgresql) under heavy load, but even if it was, why would the apache2 processes get stuck? Beside these two issues, performance is overall great. I even tried New Relic and got very good average results.

  Read the article

• Diagnosing Solaris 8 server memory and swap space usage

  - by datSilencer

  Hello everyone. Essentially, my question is related to memory allocation for Solaris virtual machines. I am running a couple of old Sun ONE 6 Java web servers on two Solaris 8 virtual machines. I see that there's a reasonable amount of swap space being used, but I'm not exactly sure if this could indicate a need to add more RAM to these machines. At service peak hours (mornings usually), the response time of the web application these servers host jumps up to at most 11 seconds (somewhat detrimental for a relatively simple web page loading action). Average response time at non peak times is about 5 seconds. What would you be able to infer about the RAM usage for these machines from the ouput below? Is this information reasonably sufficient? Or would I need to run some other commands to rule out server memory starvation? Finally, since there is a Java application at the core of the setup, I've also thought about: 1) Trace the heap's Object allocation to detect potential memory leaks. 2) Do some performance profiling to see if this instead related to networking delays. I mention this since the application talks with a single Oracle Database, but I would doubt this to be the case since they're pretty close from a network segmentation perspective. I appreciate any kind of insight and feedback you could provide. Thanks for your time and help. Server 1: 40 processes: 38 sleeping, 1 zombie, 1 on cpu CPU states: 99.1% idle, 0.4% user, 0.4% kernel, 0.0% iowait, 0.0% swap Memory: 2048M real, 295M free, 865M swap in use, 3788M swap free PID USERNAME THR PRI NICE SIZE RES STATE TIME CPU COMMAND 12676 webservd 112 29 10 616M 242M sleep 103:37 0.48% webservd 18317 root 1 59 0 23M 19M sleep 67:24 0.08% perl 9479 support 1 59 0 6696K 2448K cpu/1 0:11 0.05% top 8012 root 10 59 0 34M 704K sleep 80:54 0.04% java 1881 root 33 29 10 110M 13M sleep 33:03 0.02% webservd 7808 root 1 59 0 83M 67M sleep 7:59 0.00% perl 1461 root 20 59 0 5328K 1392K sleep 6:49 0.00% syslogd 1691 root 2 59 0 27M 680K sleep 4:22 0.00% webservd 24386 root 1 59 0 15M 11M sleep 2:50 0.00% perl 23259 root 1 59 0 11M 4240K sleep 2:42 0.00% perl 24718 root 1 59 0 11M 5464K sleep 2:29 0.00% perl 22810 root 1 59 0 19M 11M sleep 2:21 0.00% perl 24451 root 1 53 2 11M 3800K sleep 2:18 0.00% perl 18501 root 1 56 1 11M 3960K sleep 2:18 0.00% perl 14450 root 1 56 1 15M 6920K sleep 1:49 0.00% perl Server 2 42 processes: 40 sleeping, 1 zombie, 1 on cpu CPU states: 98.8% idle, 0.4% user, 0.8% kernel, 0.0% iowait, 0.0% swap Memory: 1024M real, 31M free, 554M swap in use, 3696M swap free PID USERNAME THR PRI NICE SIZE RES STATE TIME CPU COMMAND 5607 webservd 74 29 10 284M 173M sleep 20:14 0.21% webservd 15919 support 1 59 0 4056K 2520K cpu/1 0:08 0.09% top 13138 root 10 59 0 34M 1952K sleep 210:51 0.08% java 13753 root 1 59 0 22M 12M sleep 170:15 0.07% perl 22979 root 33 29 10 112M 7864K sleep 85:07 0.04% webservd 22930 root 1 59 0 3424K 1552K sleep 17:47 0.01% xntpd 22978 root 2 59 0 27M 2296K sleep 10:49 0.00% webservd 13571 root 1 59 0 9400K 5112K sleep 5:52 0.00% perl 5606 root 2 29 10 29M 9056K sleep 0:36 0.00% webservd 15910 support 1 59 0 9128K 2616K sleep 0:00 0.00% sshd 13106 root 1 59 0 82M 3520K sleep 7:47 0.00% perl 13547 root 1 59 0 12M 5528K sleep 6:38 0.00% perl 13518 root 1 59 0 9336K 3792K sleep 6:24 0.00% perl 13399 root 1 56 1 8072K 3616K sleep 5:18 0.00% perl 13557 root 1 53 2 8248K 3624K sleep 5:12 0.00% perl

  Read the article

• ERROR 2003 (HY000): Can't connect to MySQL server on (111)

  - by JohnMerlino

  I am unable to connect to on my ubuntu installation a remote tcp/ip which contains a mysql installation: viggy@ubuntu:~$ mysql -u user.name -p -h xxx.xxx.xxx.xxx -P 3306 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.xxx.xxx.xxx' (111) I commented out the line below using vim in /etc/mysql/my.cnf: # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 Then I restarted the server: sudo service mysql restart But still I get the same error. This is the content of my.cnf: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ (Note that I can log into my local mysql install just fine by running mysql (and it will log me in as root) and also note that I can get into mysql in the remote server by logging into via ssh and then invoking mysql), but I am unable to connect to the remote server via my terminal using the host, and I need to do it that way so that I can then use mysql workbench.

  Read the article

• How to get rid of a stubborn 'removed' device in mdadm

  - by T.J. Crowder

  One of my server's drives failed and so I removed the failed drive from all three relevant arrays, had the drive swapped out, and then added the new drive to the arrays. Two of the arrays worked perfectly. The third added the drive back as a spare, and there's an odd "removed" entry in the mdadm details. I tried both mdadm /dev/md2 --remove failed and mdadm /dev/md2 --remove detached as suggested here and here, neither of which complained, but neither of which had any effect, either. Does anyone know how I can get rid of that entry and get the drive added back properly? (Ideally without resyncing a third time, I've already had to do it twice and it takes hours. But if that's what it takes, that's what it takes.) The new drive is /dev/sda, the relevant partition is /dev/sda3. Here's the detail on the array: # mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Oct 26 12:27:49 2011 Raid Level : raid1 Array Size : 729952192 (696.14 GiB 747.47 GB) Used Dev Size : 729952192 (696.14 GiB 747.47 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 12 17:48:53 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 2fdbf68c:d572d905:776c2c25:004bd7b2 (local to host blah) Events : 0.34665 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - spare /dev/sda3 If it's relevant, it's a 64-bit server. It normally runs Ubuntu, but right now I'm in the data centre's "rescue" OS, which is Debian 7 (wheezy). The "removed" entry was there the last time I was in Ubuntu (it won't, currently, boot from the disk), so I don't think that's not some Ubuntu/Debian conflict (and they are, of course, closely related). Update: Having done extensive tests with test devices on a local machine, I'm just plain getting anomalous behavior from mdadm with this array. For instance, with /dev/sda3 removed from the array again, I did this: mdadm /dev/md2 --grow --force --raid-devices=1 And that got rid of the "removed" device, leaving me just with /dev/sdb3. Then I nuked /dev/sda3 (wrote a file system to it, so it didn't have the raid fs anymore), then: mdadm /dev/md2 --grow --raid-devices=2 ...which gave me an array with /dev/sdb3 in slot 0 and "removed" in slot 1 as you'd expect. Then mdadm /dev/md2 --add /dev/sda3 ...added it — as a spare again. (Another 3.5 hours down the drain.) So with the rebuilt spare in the array, given that mdadm's man page says RAID-DEVICES CHANGES ... When the number of devices is increased, any hot spares that are present will be activated immediately. ...I grew the array to three devices, to try to activate the "spare": mdadm /dev/md2 --grow --raid-devices=3 What did I get? Two "removed" devices, and the spare. And yet when I do this with a test array, I don't get this behavior. So I nuked /dev/sda3 again, used it to create a brand-new array, and am copying the data from the old array to the new one: rsync -r -t -v --exclude 'lost+found' --progress /mnt/oldarray/* /mnt/newarray This will, of course, take hours. Hopefully when I'm done, I can stop the old array entirely, nuke /dev/sdb3, and add it to the new array. Hopefully, it won't get added as a spare!

  Read the article

• Wget works, Ping doesn't

  - by derty

  There are some anomalies on a Virtuozzo virtualized Debian 4 (I know, I'm gonna upgrade this one asap, but there dependences). We run some Websites on this one. And a view Days ago exmi4 wasnt able to send mails to SOME people. I'll use live.com as exampledomain! So some of this people got mails and some didn't. Some of the mails got stuck in the queue, and after 2 days they went out!! My Nagios never showed problems with the internet connection or disk space Now i wanted to install "dig" to look how he's solving the dns request. And this Debian tells me he doesn't know dig.. Long story made short, Debian is able to download sites with exact IP or even with wget live.com, but it is not able to ping live.com. I'm 99% sure that the networking is right and the routing too! Some examples of my tring below: wget live.com downloads the site ping live.com ping http://www.live.com ping http://live.com returns: ping: unknown host live.com EDIT: i now use heise.de not live.com any more. and i found out i can ping the heise.de server by using it's IP-address. myserver:~# ping 193.99.144.85 PING 193.99.144.85 (193.99.144.85) 56(84) bytes of data. 64 bytes from 193.99.144.85: icmp_seq=1 ttl=248 time=12.7 ms 64 bytes from 193.99.144.85: icmp_seq=2 ttl=248 time=12.6 ms 64 bytes from 193.99.144.85: icmp_seq=3 ttl=248 time=12.9 ms 64 bytes from 193.99.144.85: icmp_seq=4 ttl=248 time=13.1 ms 64 bytes from 193.99.144.85: icmp_seq=5 ttl=248 time=13.1 ms --- 193.99.144.85 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4001ms rtt min/avg/max/mdev = 12.671/12.924/13.163/0.238 ms EDIT 2: myserver:/etc/apt# dig heise.de ; <<>> DiG 9.3.4-P1.2 <<>> heise.de ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 40551 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 5, ADDITIONAL: 3 ;; QUESTION SECTION: ;heise.de. IN A ;; ANSWER SECTION: heise.de. 2266 IN A 193.99.144.80 ;; AUTHORITY SECTION: heise.de. 1622 IN NS ns.pop-hannover.de. heise.de. 1622 IN NS ns.s.plusline.de. heise.de. 1622 IN NS ns.plusline.de. heise.de. 1622 IN NS ns2.pop-hannover.net. heise.de. 1622 IN NS ns.heise.de. ;; ADDITIONAL SECTION: ns.plusline.de. 265 IN A 212.19.48.14 ns.pop-hannover.de. 5113 IN A 193.98.1.200 ns2.pop-hannover.net. 15150 IN A 62.48.67.66 ;; Query time: 2 msec ;; SERVER: 193.200.112.80#53(193.200.112.80) ;; WHEN: Tue Oct 9 13:03:50 2012 ;; MSG SIZE rcvd: 216

  Read the article

• Coda 2 and SCP uploading files with the wrong permission

  - by Tom Black

  Currently I have a basic Ubuntu server running a website. The website is for a few students learning HTML/PHP and each student has their own account with a symbolic link to the shared website folder. Since the students are working on the website together, each user needs to be able to modify all the files (index.html for example). So I created a Webdev group containing all of the students with the default umask of 0002 set in their .bashrc (This allows newly created files to be 774). The shared folder is owned by the group Webdev with a chmod g+s so that new files/folders also belong to the group Webdev. The problem is that the students are using an IDE (Coda 2) and when they create a new file or folder using the IDE the file has the permissions of 644 on the server (not group writable). However when I make a new file through connecting with Cyberduck (SFTP client) the file permissions are 664 (as they should be). So I don't understand why Coda would be any different. However, after some trial and error I believe that Coda is first creating the file on local disk and then uploading that file to the server. On a mac by default a newly created file is 644. When the client uploads a file that's already 644 it stays 644 on the server side (umask is kind of useless in this situation). I've also tried creating ACL permissions for that folder but an uploaded file from my mac via SCP doesn't get the default ACL permissions. In Coda there is an option to change file permissions on a transfer. However this option seems to apply a chmod to all files being uploaded or saved. When one of students is modifying a file created by someone else when they try to upload the file or save it Coda tries to also do a chmod but fails because that user isn't the owner of the file. My current solution is using bindfs... I mount the shared web folder and bindfs sets permissions and group ownership of newly created files. However, bindfs seems to be a bit slow and I'm sure there is a better solution. Even if the students ditched Coda 2 and used Mac vim with scp the newly created files on the server would behave the same (644) which is default on the mac. Other options... 1) Either I teach the students to use (ssh/chmod) with their IDE to change their own file permissions when uploading. 2) I make all the students' Macs have the default umask of 0002 which would upload files with the right permissions. 3) Write a corn script to fix the file permissions every 5 to 15 minutes... (This option I think is the worst if students are working together at the same time). Is there any way that I could make all files that are uploaded via SCP have the default file permissions of 664 even though the uploaded file has a lower permission? (After hours of searching I don't think this is possible) I guess a corn script is my best option for novice users. How do web developers work together on larger sites? similar to this: http://serverfault.com/questions/283492/how-to-specify-file-permission-when-putting-a-file-using-openssh-sftp-command Also similar: http://serverfault.com/questions/395418/managing-linux-directory-permissions-sftp

  Read the article

• How do I get my ubuntu server to listen for database connections?

  - by Bob Flemming

  I am having a problems connecting to my database outside of phpmyadmin. Im pretty sure this is because my server isn't listening on port 3306. When I type: sudo netstat -ntlp on my OTHER working server I can see the following line: tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 20445/mysqld However, this line does not appear on the server I am having difficulty with. How do I make my sever listen for mysql connections? Here my my.conf file: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp lc-messages-dir = /usr/share/mysql #skip-networking=off #skip_networking=off #skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. #bind-address = 0.0.0.0 # # * Fine Tuning # key_buffer = 64M max_allowed_packet = 64M thread_stack = 650K thread_cache_size = 32 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 2M query_cache_size = 32M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 # # Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf. # # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 32M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• Recommendations for distributed processing/distributed storage systems

  - by Eddie

  At my organization we have a processing and storage system spread across two dozen linux machines that handles over a petabyte of data. The system right now is very ad-hoc; processing automation and data management is handled by a collection of large perl programs on independent machines. I am looking at distributed processing and storage systems to make it easier to maintain, evenly distribute load and data with replication, and grow in disk space and compute power. The system needs to be able to handle millions of files, varying in size between 50 megabytes to 50 gigabytes. Once created, the files will not be appended to, only replaced completely if need be. The files need to be accessible via HTTP for customer download. Right now, processing is automated by perl scripts (that I have complete control over) which call a series of other programs (that I don't have control over because they are closed source) that essentially transforms one data set into another. No data mining happening here. Here is a quick list of things I am looking for: Reliability: These data must be accessible over HTTP about 99% of the time so I need something that does data replication across the cluster. Scalability: I want to be able to add more processing power and storage easily and rebalance the data on across the cluster. Distributed processing: Easy and automatic job scheduling and load balancing that fits with processing workflow I briefly described above. Data location awareness: Not strictly required but desirable. Since data and processing will be on the same set of nodes I would like the job scheduler to schedule jobs on or close to the node that the data is actually on to cut down on network traffic. Here is what I've looked at so far: Storage Management: GlusterFS: Looks really nice and easy to use but doesn't seem to have a way to figure out what node(s) a file actually resides on to supply as a hint to the job scheduler. GPFS: Seems like the gold standard of clustered filesystems. Meets most of my requirements except, like glusterfs, data location awareness. Ceph: Seems way to immature right now. Distributed processing: Sun Grid Engine: I have a lot of experience with this and it's relatively easy to use (once it is configured properly that is). But Oracle got its icy grip around it and it no longer seems very desirable. Both: Hadoop/HDFS: At first glance it looked like hadoop was perfect for my situation. Distributed storage and job scheduling and it was the only thing I found that would give me the data location awareness that I wanted. But I don't like the namename being a single point of failure. Also, I'm not really sure if the MapReduce paradigm fits the type of processing workflow that I have. It seems like you need to write all your software specifically for MapReduce instead of just using Hadoop as a generic job scheduler. OpenStack: I've done some reading on this but I'm having trouble deciding if it fits well with my problem or not. Does anyone have opinions or recommendations for technologies that would fit my problem well? Any suggestions or advise would be greatly appreciated. Thanks!

  Read the article

• NTFS Permissions - Access Denied even though Explicit Allow and no Deny

  - by chris613

  I'm hoping someone can help me with this NTFS permissions problem. The short version is that I can't write a new file in F:\SomeDir even though I seem to be granted full permissions via both the "Domain Admins" group and a second unprivileged group. The "Effective Permissions" tab in the explorer permissions UI shows that I have full control, and there are no "Deny"s anywhere in the ACL or anything else that looks unusual. I am logged into the machine over RDP and accessing the disk directly, not through a share. F:\SomeDir>set U USERDNSDOMAIN=THEOFFICE.LOCAL USERDOMAIN=THEOFFICE USERNAME=thisisme USERPROFILE=C:\Users\thisisme F:\SomeDir>icacls . . BUILTIN\Administrators:(I)(F) CREATOR OWNER:(I)(OI)(CI)(IO)(F) THEOFFICE\Domain Admins:(I)(OI)(CI)(F) NT AUTHORITY\SYSTEM:(I)(OI)(CI)(F) BUILTIN\Administrators:(I)(OI)(CI)(IO)(F) BUILTIN\Users:(I)(OI)(CI)(RX) Successfully processed 1 files; Failed processing 0 files F:\SomeDir>net group /domain "Domain Admins" The request will be processed at a domain controller for domain THEOFFICE.local. Group name Domain Admins Comment Designated administrators of the domain Members ------------------------------------------------------------------------------- Administrator thatguy thisisme The command completed successfully. F:\SomeDir>echo "whyUNoCreateFile?" > whyUNoCreateFile.txt Access is denied. I searched for answers and came across similar problems that lead to UAC (ex. Why does removing the EVERYONE group prevent domain admins from accessing a drive? ). I can't turn off UAC at the moment, so I try a "regular" group that I'm also part of. This group has no special rights assignments and is not part of any administrative groups. Still no dice: [***** This one command executed in an elevated shell *****] F:\SomeDir>icacls . /grant THEOFFICE\iteveryone:(OI)(CI)F processed file: . Successfully processed 1 files; Failed processing 0 files F:\SomeDir>net group /domain "iteveryone" The request will be processed at a domain controller for domain THEOFFICE.local. Group name ITeveryone Comment Members ------------------------------------------------------------------------------- Administrator thatguy thisisme otherguy someitguy The command completed successfully. F:\ScanningVMsForIBM>echo y > u Access is denied. As you can see, using a "regular" group didn't help. I have logged out and back in to the server to ensure my login token is up to date, and at any rate I belonged to these groups before the server was created. If I grant explicit permission to myself, it does allow me to write files: [***** This one command executed in an elevated shell *****] F:\SomeDir>icacls . /grant THEOFFICE\thisisme:(OI)(CI)F processed file: . Successfully processed 1 files; Failed processing 0 files F:\SomeDir>echo y > u F:\SomeDir>type u y My requirement is for the "Domain Admins" group to have Full Control, or if that's not possible without disabling UAC, then a second group will do, but I can't get either to work. I'm really stumped. Can someone please point out what I could be overlooking?

  Read the article

• Do I need to be worried about these SMART drive temperatures?

  - by Steve Lorimer

  I have 5 hard drives in a machine sitting in a cupboard. /dev/sda is a 500GB Seagate drive, and is the boot disk. /dev/sd{b,c,d,e} are 2TB drives in a raid6 configuration. smartctl is showing significantly higher temperatures (like ~140 degrees celsius) on the raid drives than the boot drive. Do I need to be worried? /dev/sdb and /dev/sde are new Western Digital Black drives (new=1 week) /dev/sdc and /dev/sdd are 5 year old Hitachi drives /dev/sda [SAT], Temperature_Celsius changed from 40 to 39 /dev/sdc [SAT], Temperature_Celsius changed from 142 to 146 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 142 /dev/sdd [SAT], Temperature_Celsius changed from 142 to 146 /dev/sda [SAT], Airflow_Temperature_Cel changed from 61 to 62 /dev/sda [SAT], Temperature_Celsius changed from 39 to 38 /dev/sde [SAT], Temperature_Celsius changed from 107 to 108 /dev/sdb [SAT], Temperature_Celsius changed from 108 to 109 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sda [SAT], Airflow_Temperature_Cel changed from 62 to 61 /dev/sda [SAT], Temperature_Celsius changed from 38 to 39 Update: Adding detailed drive information as per request: /dev/sda =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: 5VV47HXA LU WWN Device Id: 5 000c50 02aad5ad6 Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdb =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1398726 LU WWN Device Id: 5 0014ee 003b8bd25 Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdc =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WSTUD LU WWN Device Id: 5 000cca 369cc9f5d Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdd =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WST4D LU WWN Device Id: 5 000cca 369cc9f48 Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sde =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1483782 LU WWN Device Id: 5 0014ee 3002d235c Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled

  Read the article

• How to transfer data between two networks efficiently

  - by Tono Nam

  I would like to transfer files between two places over the internet. Right now I have a VPN and I am able to browse, download and transfer files. So my question is not really how to transfer the files; Instead, I would like to use the most efficient approach because the two places constantly share a lot of data. The reason why I want to get rid of the VPN is because it is two slow. Having high upload speed is very expensive/impossible in residential places so I would like to use a different approach. I was thinking about using programs such as http://www.dropbox.com . The problem with Dropbox is that the free version comes with only 2 GB of storage. I think the deals they offer are OK and I might be willing to pay to get that increase in speed. But I am concerned with the speed of transferring data. Dropbox will upload the file to their server then send it from the server to the other location. I would like it to be even faster. Anyway I was thinking why not create a program myself. This is the algorithm that I was thinking of. Let me know if it sounds too crazy. (Remember my goal is to transfer files as fast as possible) Things that I will use in this algorithm: Server on the internet called S (Has fast download and upload speed. I pay to host a website and some services in there. I want to take advantage of it.) Client A at location 1 Client B at location 2 So lets say at location 1, 20 large files are created and need to be transferred to location 2. Client A compresses the files with the highest compression ratio possible. Client A starts sending data via UDP to client B. Because I am using UDP I will include the sequence number on each packet. Have server S help speed up things. For example every time a packet is lost we can use Server S to inform client A that it needs to resend a packet. Anyways I think this approach will increase the transfer rate. I do not know if it is possible to start sending data while it is being compressed. Or if it is possible to start decompressing data even if we are not done receiving the whole file. Maybe it will be faster to start sending the files right away without compressing. If I knew that I will always be sending large text files then I will obviously use the compression. I need this as a general algorithm. So I guess my question is could I increase performance by using UDP instead of TCP and by using an extra server to keep track of lost packets? And how should I compress files before sending? Compressing a 1 GB file with the highest compression ratio takes about 1 hour! I would like to take advantage of that time by sending it as it is being compressed.

  Read the article

< Previous Page | 799 800 801 802 803 804 805 806 807 808 809 810  | Next Page >