Search Results

Search found 24117 results on 965 pages for 'write'.

Page 810/965 | < Previous Page | 806 807 808 809 810 811 812 813 814 815 816 817  | Next Page >

• Lookup table size reduction

  - by Ryan

  Hello: I have an application in which I have to store a couple of millions of integers, I have to store them in a Look up table, obviously I cannot store such amount of data in memory and in my requirements I am very limited I have to store the data in an embebedded system so I am very limited in the space, so I would like to ask you about recommended methods that I can use for the reduction of the look up table. I cannot use function approximation such as neural networks, the values needs to be in a table. The range of the integers is not known at the moment. When I say integers I mean a 32 bit value. Basically the idea is use some copmpression method to reduce the amount of memory but without losing many precision. This thing needs to run in hardware so the computation overhead cannot be very high. In my algorithm I have to access to one value of the table do some operations with it and after update the value. In the end what I should have is a function which I pass an index to it and then I get a value, and after I have to use another function to write a value in the table. I found one called tile coding http://www.cs.ualberta.ca/~sutton/book/8/node6.html, this one is based on several look up tables, does anyone know any other method?. Thanks.

  Read the article

• Sms via a nokia phone over a serial port

  - by abigblackman

  Hi, I'm trying to send a sms via a Nokia phone over serial which is easy enough via putty. The commands from the nokia documentation works fine. However, trying to send the same commands from a c# application fails miserably. I've run Sysinternals PortMon and can see the commands come through OK, the only difference I can see is in the way it connects but I am having trouble finding the commands that would iron out those differences. The code I'm running looks a little bit like this using (SerialPort port = new SerialPort(comPort, 9600, Parity.None, 8, StopBits.One)) { port.DataReceived += new SerialDataReceivedEventHandler(port_DataReceived); port.ErrorReceived += new SerialErrorReceivedEventHandler(port_ErrorReceived); //port.ReceivedBytesThreshold = 1; port.DtrEnable = true; port.RtsEnable = true; port.ReadTimeout = 1; port.Handshake = Handshake.XOnXOff; try { port.Open(); port.WriteLine("AT"); port.WriteLine("AT+CMGF=1"); port.WriteLine("AT+CMGS=\"" + number + "\""); port.WriteLine(message); port.Write(new byte[] { (byte)26 }, 0, 1); } finally { if (port.IsOpen) { port.Close(); } } The differences I'm seeing in the trace from the serial port are At the start 0.00001844 aspnet_wp.exe IOCTL_SERIAL_SET_HANDFLOW USBSER001 SUCCESS Shake:1 Replace:43 XonLimit:4096 XoffLimit:4096 And at the very end 0.00061153 aspnet_wp.exe IOCTL_SERIAL_PURGE USBSER001 SUCCESS Purge: RXABORT RXCLEAR 0.00004442 aspnet_wp.exe IOCTL_SERIAL_PURGE USBSER001 SUCCESS Purge: TXABORT TXCLEAR Has anyone got any tips on how to iron out these issues? I also notice that the phone is not responding back to the application with any acknowledgement when I issue a command so I suspect the problem is with the connection, not those messages at the end.

  Read the article

• What are the fastest-performing options for a read-only, unordered collection of unique strings?

  - by Dan Tao

  Disclaimer: I realize the totally obvious answer to this question is HashSet<string>. It is absurdly fast, it is unordered, and its values are unique. But I'm just wondering, because HashSet<T> is a mutable class, so it has Add, Remove, etc.; and so I am not sure if the underlying data structure that makes these operations possible makes certain performance sacrifices when it comes to read operations -- in particular, I'm concerned with Contains. Basically, I'm wondering what are the absolute fastest-performing data structures in existence that can supply a Contains method for objects of type string. Within or outside of the .NET framework itself. I'm interested in all kinds of answers, regardless of their limitations. For example I can imagine that some structure might be restricted to strings of a certain length, or may be optimized depending on the problem domain (e.g., range of possible input values), etc. If it exists, I want to hear about it. One last thing: I'm not restricting this to read-only data structures. Obviously any read-write data structure could be embedded inside a read-only wrapper. The only reason I even mentioned the word "read-only" is that I don't have any requirement for a data structure to allow adding, removing, etc. If it has those functions, though, I won't complain.

  Read the article

• .NET Regular Expression to find actual words in text

  - by Mehdi Anis

  I am using VB .NET to write a program that will get the words from a suplied text file and count how many times each word appears. I am using this regular expression:- parser As New Regex("\w+") It gives me almost 100% correct words. Except when I have words like "Ms Word App file name is word.exe." or "is this a c# statment If(ab?1,0) ?" In such cases I get [word & exe] AND [If, a, b, 1 and 0] as seperate words. it would be nice (for my purpose) that I received word.exe and (If(ab?1,0) as words. I guess \w+ looks for white space, sentence terminating punctuation mark and other punctuation marks to determine a word. I want a similar regular Expression that will not break a word by a punctuation mark, if the punctuation mark is not the end of the word. I think end-of-word can be defined by a trailing WhiteSpace, Sentence terminating Punctuation (you may think of others). if you can suggest some regular expression 9for VB .NET) that will be great help. Thanks.

  Read the article

• reading non-english html pages with c#

  - by Gal Miller

  I am trying to find a string in Hebrew in a website. The reading code is attached. Afterward I try to read the file using streamReader but I can't match strings in other languages. what am I suppose to do? // used on each read operation byte[] buf = new byte[8192]; // prepare the web page we will be asking for HttpWebRequest request = (HttpWebRequest) WebRequest.Create("http://www.webPage.co.il"); // execute the request HttpWebResponse response = (HttpWebResponse) request.GetResponse(); // we will read data via the response stream Stream resStream = response.GetResponseStream(); string tempString = null; int count = 0; FileStream fileDump = new FileStream(@"c:\dump.txt", FileMode.Create); do { count = resStream.Read(buf, 0, buf.Length); fileDump.Write(buf, 0, buf.Length); } while (count > 0); // any more data to read? fileDump.Close();

  Read the article

• How do I best do balanced quoting with Perl's Regexp::Grammars?

  - by Evan Carroll

  Using Damian Conway's Regexp::Grammars, I'm trying to match different balanced quoting ('foo', "foo", but not 'foo") mechanisms -- such as parens, quotes, double quotes, and double dollars. This is the code I'm currently using. <token: pair> \'<literal>\'|\"<literal>\"|\$\$<literal>\$\$ <token: literal> [\S]+ This generally works fine and allows me to say something like: <rule: quote> QUOTE <.as>? <pair> My question is how do I reform the output, to exclude the needles notation for the pair token? { '' => 'QUOTE AS \',\'', 'quote' => { '' => 'QUOTE AS \',\'', 'pair' => { 'literal' => ',', '' => '\',\'' } } }, Here, there is obviously no desire to have pair in between, quote, and the literal value of it. Is there a better way to match 'foo', "foo", and $$foo$$, and maybe sometimes ( foo ) without each time creating a needless pair token? Can I preprocess-out that token or fold it into the above? Or, write a better construct entirely that eliminates the need for it?

  Read the article

• jquery post and get request different on local intranet and live server

  - by nccsbim071

  Hi, I have been developing an asp.net mvc application where i need to make large amounts of jquery post and get request to call controller methods and get back json result. Everything is working fine. The problem is i had to write different jquery post and get request url on local intranet(deployed by making virtual directory) and live server. the current jquery request url is given as below: $.post("/ProjectsChat/GetMessages", { roomId: 24 },.......... now this format of url for jquery request works fine for live server but not for local intranet. Since on local intranet i have made a virtual directory. It only works when i append the name of the virtual directory like this "$.post("MyProjectVirutalDirName/ProjectsChat..................." I am sure most of you must have come across same problem. now i have made a full project, there are large number of jquery requests made, i want to test the application by deploying on local intranet and fix the bugs. Changing all the jquery requests for local intranet doesn't seem feasible solution to me, i am really in a big problem, i can't deploy the same project on live server just like that and test it there, client will kill me. I need some expert advice. Please help Thanks

  Read the article

• How to call a function from another class file

  - by Guy Parker

  I am very familiar with writing VB based applications but am new to Xcode (and Objective C). I have gone through numerous tutorials on the web and understand the basics and how to interact with Interface Builder etc. However, I am really struggling with some basic concepts of the C language and would be grateful for any help you can offer. Heres my problem… I have a simple iphone app which has a view controller (FirstViewController) and a subview (SecondViewController) with associated header and class files. In the FirstViewController.m have a function defined @implementation FirstViewController (void) writeToServer:(const uint8_t ) buf { [oStream write:buf maxLength:strlen((char)buf)]; } It doesn't really matter what the function is. I want to use this function in my SecondViewController, so in SecondViewController.m I import FirstViewController.h import "SecondViewController.h" import "FirstViewController.h" @implementation SecondViewController -(IBAction) SetButton: (id) sender { NSString *s = [@"Fill:" stringByAppendingString: FillLevelValue.text]; NSString *strToSend = [s stringByAppendingString: @":"]; const uint8_t *str = (uint8_t *) [strToSend cStringUsingEncoding:NSASCIIStringEncoding]; FillLevelValue.text = strToSend; [FirstViewController writeToServer:str]; } This last line is where my problem is. XCode tells me that FirstViewController may not respond to writeToServer. And when I try to run the application it crashes when this function is called. I guess I don't fully understand how to share functions and more importantly, the relationship between classes. In an ideal world I would create a global class to place my functions in and call them as required. Any advice gratefully received.

  Read the article

• What is the PastryKit Framework?

  - by Kerrick

  I'm trying to find any information I can on the PastryKit Javascript Framework. It appears to be in use on the iPhone User Guide that is displayed on the iPhone itself in Mobile Safari, but I cannot find any documentation or API. If you want to see it in action, open Safari 4, set your user agent to iPhone 3 (In the Develop menu) and check out the guide. Overall, it seems to be a way to write an HTML/CSS/Javascript application that acts like a native iPhone app. When it comes to Javascript, I used the JS Beautifier on (what I assume to be) the framework file and it was over 3,400 lines! Beautified, (again what I assume to be) their implementation of it was over 1,200 lines. On the CSS side, I used Clean CSS on (again what I assume to be) the framework CSS, and it came out to over 700 lines. Their implementation was shy of 500. Does anybody have, or know where to find, any information, documentation, or APIs on PastryKit? Or, can anybody figure out how to implement it?

  Read the article

• Tools\addin's for formating or cleaning up xaml?

  - by cody

  I'm guessing these don't exist since I searched around for these but I'm looking for a few tools: 1) A tool that cleans up my xaml so that the properties of elements are consistent through a file. I think enforcing that consistence would make the xaml easier to read. Maybe there could be a hierarchy of what comes first but if not alphabetical might work. Example before: TextBox Name="myTextBox1" Grid.Row="3" Grid.Column="1" Margin="4" TextBox Grid.Column="1" Margin="4" Name="t2" Grid.Row="3" Example after: TextBox Name="myTextBox1" Grid.Row="3" Grid.Column="1" Margin="4" TextBox Name="t2" Grid.Row="3" Grid.Column="1" Margin="4" (note < / has been remove from the above since control seem to have issues parsing whe the after section was added) 2) Along the same lines as above, to increase readability, a tool to align properties, so from the above code example similar props would start in the same place. <TextBox Name="myTextBox1" Grid.Row="3" Grid.Column="1" Margin="4"/> <TextBox Name="t2" Grid.Row="3" Grid.Column="1" Margin="4"/> I know VS has default settings for XAML documents so props can be on one line or separate lines so maybe if there was a tool as described in (1) this would not be needed...but it would still be nice if you like your props all on one line. 3) A tool that adds X to the any of the Grid.Row values and Y to any of the Grid.Column values in the selected text. Every time I add a new row\column I have to go manually fix these. From my understanding Expression Blend can help with this but seem excessive to open Blend just to increment some numbers (and just don't grok Blend). Maybe vs2010 with the designer will help but right now I'm on VS08 and Silverlight. Any one know of any tools to help with this? Anyone planning to write something like this...I'm looking at you JetBrains and\or DevExpress. Thanks.

  Read the article

• Traversing through an arbitrary dictionary tree structure in C#

  - by Rudism

  I am trying to write a recursive C# function that will operate on generic dictionaries of the form IDictionary<string, T> where T is either another IDictionary<string, T> or a string. My first failed attempt looked something like this: public string HandleDict(IDictionary<string, string> dict){ // handle the leaf-node here } public string HandleDict<T>(IDictionary<string, IDictionary<string, T>> dict){ // loop through children foreach(string key in dict.Keys){ HandleDict(dict[key]); } } I also tried variants of HandleDict<T>(IDictionary<string, T>) where T : IDictionary<string, T> but that also doesn't quite work. I know that what I want to do could be achieved through a custom class as the parameter instead of dictionaries, and that my attempts are conceptually flawed (there's no end to the recursion in the generic function). I would still like to know if there is actually a way to do what I want here using just generic IDictionaries.

  Read the article

• Grep expression with special file names

  - by user2919185

  i am a real beginner in csh/tcsh scripting and that's why i need your help. The problem is I have to go through some regular files in directories and find those files, that have their own name in its content. In the following piece of script is cycle in which I am going through paths and using grep to find the file's name in its content. What is surely correct is $something:q - is array of paths where i have to find files. The next variable is name in which is only name of current file. for example: /home/computer/text.txt (paths) and: text.txt (name) And my biggest problem is to find names of files in their content. It's quite difficult for me to write correct grep for this, cause the names of files and directories that i am passing through are mad. Here are some of them: /home/OS/pocitacove/testovaci_adresar/z/test4.pre_expertov/!_1 /home/OS/pocitacove/testovaci_adresar/z/test4.pre_expertov/dam/$user/:e/'/-r /home/OS/pocitacove/testovaci_adresar/z/test3/skusime/ taketo/ taketo /home/OS/pocitacove/testovaci_adresar/z/test4.pre_expertov/.-bla/.-bla/.a=b /home/OS/pocitacove/testovaci_adresar/z/test4.pre_expertov/.-bla/.-bla/@ /home/OS/pocitacove/testovaci_adresar/z/test4.pre_expertov/.-bla/.-bla/: /home/OS/pocitacove/testovaci_adresar/z/test4.pre_expertov/.-bla/.-bla/'ano' foreach paths ($something:q) set name = "$paths:t" @ number = (`grep -Ec "$name" "$paths"`) if ($number != 0) then echo -n "$paths " echo $number endif @ number = 0 end

  Read the article

• Problem writing a snippet containing Emacs Lisp code

  - by user388346

  Hi all, I've been trying to make use of a cool feature of YASnippet: write snippets containing embedded Emacs Lisp code. There is a snippet for rst-mode that surrounds the entered text with "=" that is as long as the text such as in ==== Text ==== Based on this snippet, I decided to slightly modify it (with Elisp) so that it comments out these three lines depending on the major mode you are in (I thought that such a snippet would be useful to organize the source code). So I wrote this: ${1:`(insert comment-start)`} ${2:$(make-string (string-width text) ?\-)} $1 ${2:Text} $1 ${2:$(make-string (string-width text) ?\-)} $0 This code works relatively well except for one problem: the indentation of these three lines gets mixed up, depending on the major mode I'm in (e.g., in emacs-lisp-mode, the second and the third lines move more to the right than the first line). I think the source of the problem might have something to do with what comes after the string ${1: on the first line. If I add a character, I have no problem (i.e., all three lines are correctly aligned at the end of the snippet expansion). If I add a single space after this string, the misalignment problem still continues though. So my question is: do you know of any way of rewriting this snippet so that this misalignment does not arise? Do you know what's the source of this behaviour? Cheers,

  Read the article

• Help me to refactor this F# code to tail recursion

  - by Kev

  I write some code to learning F#. Here is a example: let nextPrime list= let rec loop n= match n with | _ when (list |> List.filter (fun x -> x <= ( n |> double |> sqrt |> int)) |> List.forall (fun x -> n % x <> 0)) -> n | _ -> loop (n+1) loop (List.max list + 1) let rec findPrimes num= match num with | 1 -> [2] | n -> let temp = findPrimes <| n-1 (nextPrime temp ) :: temp //find 10 primes findPrimes 10 |> printfn "%A" I'm very happy that it just works! I'm totally beginner to recursion Recursion is a wonderful thing. I think findPrimes is not efficient. Someone help me to refactor findPrimes to tail recursion if possible? BTW, is there some more efficient way to find first n primes?

  Read the article

• Memorystream and Large Object Heap

  - by Flo

  I have to transfer large files between computers on via unreliable connections using WCF. Because I want to be able to resume the file and I don't want to be limited in my filesize by WCF, I am chunking the files into 1MB pieces. These "chunk" are transported as stream. Which works quite nice, so far. My steps are: open filestream read chunk from file into byet[] and create memorystream transfer chunk back to 2. until the whole file is sent My problem is in step 2. I assume that when I create a memory stream from a byte array, it will end up on the LOH and ultimately cause an outofmemory exception. I could not actually create this error, maybe I am wrong in my assumption. Now, I don't want to send the byte[] in the message, as WCF will tell me the array size is too big. I can change the max allowed array size and/or the size of my chunk, but I hope there is another solution. My actual question(s): Will my current solution create objects on the LOH and will that cause me problem? Is there a better way to solve this? Btw.: On the receiving side I simple read smaller chunks from the arriving stream and write them directly into the file, so no large byte arrays involved.

  Read the article

• Update Azure Service Configuration File using Powershell

  - by David Osborn

  I'm trying to write a powershell script that updats each of the DiagnosticsConnectionString and DataConnectionString values below, but I can't seem to find each individual Role node using $serviceconfig.ServiceConfiguration.SelectSingleNode("Role[@name='MyService_WorkerRole']") doing echo $serviceconfig.ServiceConfiguration.Role lists out both Role nodes for me so I know it is working up to that point, but after that I am not having much success. where $serviceConfig contains the below XML: <?xml version="1.0"?> <ServiceConfiguration serviceName="MyService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceConfiguration"> <Role name="MyService_WorkerRole"> <Instances count="1" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="really long string" /> <Setting name="DataConnectionString" value="really long string 2" /> </ConfigurationSettings> </Role> <Role name="MyService_WebRole"> <Instances count="1" /> <ConfigurationSettings> <Setting name="DiagnosticsConnectionString" value="really long string 3" /> <Setting name="DataConnectionString" value="really long string 4" /> </ConfigurationSettings> </Role> </ServiceConfiguration>

  Read the article

• zend session exception on zend_session::start with forms

  - by Grant Collins

  Hi I'm having issues with trying to use Zend_Form_SubForm and sessions. My controller is in essance acting a wizard showing different subforms depending on the stage of the wizard. Using the example I am planning on storing the forms in a session namespace. My controller looks like this. include 'mylib/Form/addTaskWizardForm.php'; class AddtaskController extends Zend_Controller_Action{ private $config = null; private $log = null; private $subFormSession = null; /** * This function is called and initialises the global variables to this object * which is the configuration details and the logger to write to the log file. */ public function init(){ $this->config = Zend_Registry::getInstance()->get('config'); $this->log = Zend_Registry::getInstance()->get('log'); //set layout $this->_helper->layout->setLayout('no-sidemenus'); //we need to get the subforms and $wizardForms = new addTaskWizardForm(); $this->subFormSession = new Zend_Session_Namespace('addTaskWizardForms'); if(!isset($this->subFormSession->subforms)){ $this->subFormSession->subforms = $wizardForms; } } /** * The Landing page controller for the site. */ public function indexAction(){ $form = $this->subFormSession->subforms->getSubForm('start'); $this->view->form = $form; } However this is causing the application session to crash out with Uncaught exception 'Zend_Session_Exception' with message 'Zend_Session::start() Any idea why this is having issues with the Zend Session?? thanks.

  Read the article

• Best XML format for log events in terms of tool support for data mining and visualization?

  - by Thorbjørn Ravn Andersen

  We want to be able to create log files from our Java application which is suited for later processing by tools to help investigate bugs and gather performance statistics. Currently we use the traditional "log stuff which may or may not be flattened into text form and appended to a log file", but this works the best for small amounts of information read by a human. After careful consideration the best bet has been to store the log events as XML snippets in text files (which is then treated like any other log file), and then download them to the machine with the appropriate tool for post processing. I'd like to use as widely supported an XML format as possible, and right now I am in the "research-then-make-decision" phase. I'd appreciate any help both in terms of XML format and tools and I'd be happy to write glue code to get what I need. What I've found so far: log4j XML format: Supported by chainsaw and Vigilog. Lilith XML format: Supported by Lilith Uninvestigated tools: Microsoft Log Parser: Apparently supports XML. OS X log viewer: plus there is a lot of tools on http://www.loganalysis.org/sections/parsing/generic-log-parsers/ Any suggestions?

  Read the article

• Architecture for database analytics

  - by David Cournapeau

  Hi, We have an architecture where we provide each customer Business Intelligence-like services for their website (internet merchant). Now, I need to analyze those data internally (for algorithmic improvement, performance tracking, etc...) and those are potentially quite heavy: we have up to millions of rows / customer / day, and I may want to know how many queries we had in the last month, weekly compared, etc... that is the order of billions entries if not more. The way it is currently done is quite standard: daily scripts which scan the databases, and generate big CSV files. I don't like this solutions for several reasons: as typical with those kinds of scripts, they fall into the write-once and never-touched-again category tracking things in "real-time" is necessary (we have separate toolset to query the last few hours ATM). this is slow and non-"agile" Although I have some experience in dealing with huge datasets for scientific usage, I am a complete beginner as far as traditional RDBM go. It seems that using column-oriented database for analytics could be a solution (the analytics don't need most of the data we have in the app database), but I would like to know what other options are available for this kind of issues.

  Read the article

• How to convert many thousands of lines of VBScript to C#?

  - by Ross Patterson

  I have a collection of about 10,000 small VBScript programs (50-100 lines each) and a small collection of larger ones, and I'm looking for a way to convert them to C# without resorting to by-hand transliteration. The programs are automated test cases for a web application, written for HP/Mercury's QuickTest Pro, and I'm trying to turn them into test cases for Selenium. Luckily, the tests appear to be well-written, using a library of building blocks and idioms (the larger programs), so the test cases actually resemble a domain-specific language more than they do VBScript, and the QTP-ness is well-buried inside the libraries. Ideally, what I'm searching for is a tool that can do the syntactic transformation from VBScript to C# for both the dsl-ish test cases and also the more complicated building-block libraries. That would leave me with a manual cleanup of the libraries, and probably very little work on the test cases. If I could find a VBScript-to-VB.NET translator, I'd take that also, as I suspect I could compile the VB.NET and then de-compile to C# using .NET Relector or something similar. Plan B is to write a translator of my own for the test cases, since they're in a very straight-line style, but it wouldn't help with the libraries. Any suyggestions? I haven't written a compiler in at least 15 years, and while I haven't forgotten how, I'm not looking forward to it - least of all for VBScript!

  Read the article

• Typical Hadoop setup for remote job submission

  - by Artii

  So I am still a bit new to hadoop and am currently in the process of setting up a small test cluster on Amazonaws. So my question relates to some tips on the structuring of the cluster so it is possible to work submit jobs from remote machines. Currently I have 5 machines. 4 are basically the Hadoop cluster with the NameNodes, Yarn etc. One machine is used as a manager machine( Cloudera Manager). I am gonna describe my thinking process on the setup and if anyone can chime in the points I am not clear with, that would be great. I was thinking what was the best setup for a small cluster. So I decided to expose only one manager machine and probably use that to submit all the jobs through it. The other machines will see each other etc, but not be accessible from the outside world. I am have conceptual idea on how to do this,but I am not sure how to properly go about doing this though, if anyone could point me in the right direction that would great. Also another big point is, I want to be able to submit jobs to the cluster through exposed machine from a client machine (might be Windows). I am not so clear on this setup as well. Do I need to have Hadoop installed on the machine in order to use the normal hadoop commands, and to write/submit jobs say from Eclipse or something similar. So to sum it up my questions are, Is this an ok setup for a small test cluster How can I go about using one exposed machine to submit/route jobs to the cluster, without having any of the Hadoop nodes on it. How do I setup a client machine to submit jobs to a remote cluster, and an example on how to do it on Windows. Also if there are any reason not to use Windows as a client machine in this setup. Thanks I would greatly appreciate any advice or help on this.

  Read the article

• What type of web service should I put together?

  - by Jake

  I want to write a web service using Visual Studio. The service needs to support some type of authentication, and should be able to receive commands via simple HTTP GET requests. The input would only be a method call with some parameters, and the responses will be simple status/error codes. My instinct would be to go with an ASP.NET Web Service, but this isn't an option in C# 4.0 and it makes me wonder if I should be using something that's more up-to-date. I've looked into WCF, but it seems like this requires a running application on the client-side - is there a way to query a WCF host by just accessing a URL? The authentication is also an important piece. Developing my own little authentication system seems like a bad idea - I've read that it's too easy to mess up. What would be the standard way of authenticating with a web service like this? I'd love to look up all of the specifics on this and learn it myself, but I really don't even know where to begin. Some direction would be greatly appreciated!

  Read the article

• Help in J2ME for creating image and parse it

  - by HAMED

  Can anyone tell me how i can parse a png image into many png images in J2ME??? for examole:I just wnat to have a source image 150*150 pixel and parse it to 10 image with 15*15 pixel. I write an elemantary code that have exeption. This is my code: public class HelloMIDlet extends MIDlet implements CommandListener { private boolean midletPaused = false; private Command exitCommand; private Form form; private StringItem stringItem; Image im , im2; Form form1 = null; public HelloMIDlet() { try { // create source image im = Image.createImage("/image1.JPG"); int height = im.getHeight() ; int width = im.getWidth() ; int x = 0 ; int y = 0 ; while ( y < height ){ while ( x < width ){ // create 15*15 pixel of source image im2 = im.createImage(im, x, y, 15, 15, Sprite.TRANS_NONE) ; x += 15 ; } y += 15 ; x = 0 ; } } catch (IOException ex) { ex.printStackTrace(); } } please help me to make it right....It's emergency! Thanks a lot guys...

  Read the article

• Newb Question: scanf() in C

  - by riemannliness

  So I started learning C today, and as an exercise i was told to write a program that asks the user for numbers until they type a 0, then adds the even ones and the odd ones together. Here is is (don't laugh at my bad style): #include <stdio.h>; int main() { int esum = 0, osum = 0; int n, mod; puts("Please enter some numbers, 0 to terminate:"); scanf("%d", &n); while (n != 0) { mod = n % 2; switch(mod) { case 0: esum += n; break; case 1: osum += n; } scanf("%d", &n); } printf("The sum of evens:%d,\t The sum of odds:%d", esum, osum); return 0; } My question concerns the mechanics of the scanf() function. It seems that when you enter several numbers at once separated by spaces (eg. 1 22 34 2 8), the scanf() function somehow remembers each distinct numbers in the line, and steps through the while loop for each one respectively. Why/how does this happen? Example interaction within command prompt: - Please enter some numbers, 0 to terminate: 42 8 77 23 11 (enter) 0 (enter) - The sum of evens:50, The sum of odds:111 I'm running the program through the command prompt, it's compiled for win32 platforms with visual studio.

  Read the article

• -(void)dealloc - How ? Objective - C

  - by sagar

  Please Note that - this is not similar than this question. OK. To understand my question, First of all please see both of these destructors. - (void)dealloc { [Marketdetails release]; Marketdetails=nil; [parsedarray release]; parsedarray=nil; [Marketid release]; Marketid=nil; [marketname release]; marketname=nil; [super dealloc]; } - (void)dealloc { [super dealloc]; [Marketdetails release]; Marketdetails=nil; [parsedarray release]; parsedarray=nil; [Marketid release]; Marketid=nil; [marketname release]; marketname=nil; } See, Both destructors have different code. In First Destructor first current class objects are released & then [super dealloc] is called. In second Desctructor first [super dealloc] is called. My question is as follows. Where should we write [super dealloc] ? first or last ? or it doesn't matter ?

  Read the article

< Previous Page | 806 807 808 809 810 811 812 813 814 815 816 817  | Next Page >