Search Results

Search found 22569 results on 903 pages for 'win32 process'.

Page 814/903 | < Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >

• Why does Ubuntu only detect one USB LAN adapters at a time?

  - by EGO

  I try to connect real switch with my computer for an exam preparation, for this purpose I need more than one LAN cards, and there is only one built in LAN card in my computer. So, to get more LAN cards, I bought 4 USB Ethernet adapters (as I have 4 usb ports in may laptop 2 usb 2.0 ports, 2 usb 3.0 ports). When I plug these adapters in my computer Ubuntu only detects one LAN card from 2.0 usb ports, and one LAN card from 3.0 ports. And sometimes detects only one USB LAN from all the usb ports. Actually the real problem is Ubuntu shows these USB LAN adapters in the "lsusb", but does not list them in "ifconfig". Kontron (Industrial Computer Source / ICS Advent) is my LAN USB ethernet. abc@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hu Bus 002 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Bus 001 Device 004: ID 064e:e258 Suyin Corp. Bus 003 Device 011: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 013: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 003 Device 012: ID 0fe6:9700 Kontron (Industrial Computer Source / ICS Advent) Bus 002 Device 005: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR -- etho is my built in LAN card, while eth1 is the only USB LAN card that ubuntu has detected. abc@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 2c:27:d7:a5:d2:39 inet6 addr: fe80::2e27:d7ff:fea5:d239/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:21056 errors:0 dropped:1 overruns:0 frame:0 TX packets:5669 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1407289 (1.4 MB) TX bytes:372566 (372.5 KB) Interrupt:49 Base address:0xa000 eth1 Link encap:Ethernet HWaddr 00:e0:4c:53:44:58 inet6 addr: fe80::2e0:4cff:fe53:4458/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9230 errors:0 dropped:0 overruns:0 frame:0 TX packets:9230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:557648 (557.6 KB) TX bytes:557648 (557.6 KB) wlan0 Link encap:Ethernet HWaddr cc:52:af:5e:78:05 inet addr:192.168.1.65 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::ce52:afff:fe5e:7805/64 Scope:LinkU UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:17389 errors:0 dropped:0 overruns:0 frame:0 TX packets:12231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:22452248 (22.4 MB) TX bytes:1502750 (1.5 MB) If I unplug the USB LAN card which Ubuntu has detected, then Ubuntu will detect a USB LAN card from the remaining plugged adapters, and process go on untill I plug all the USB LAN adapters. Looking for some urgent help. Thanks

  Read the article

• Ubuntu 12.04 LTS initramfs-tools dependency issue

  - by Mike

  I know this has been asked several times, but each issue and resolution seems different. I've tried almost everything I could think of, but I can't fix this. I have a VM (VMware I think) running 12.04.03 LTS which has stuck dependencies. The VM is on a rented host, running a live system so I don't want to break it (further). uname -a Linux support 3.5.0-36-generic #57~precise1-Ubuntu SMP Thu Jun 20 18:21:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Some more: sudo apt-get update [sudo] password for tracker: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run ‘apt-get -f install’ to correct these. The following packages have unmet dependencies. initramfs-tools : Depends: initramfs-tools-bin (< 0.99ubuntu13.1.1~) but 0.99ubuntu13.3 is installed E: Unmet dependencies. Try using -f. sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: initramfs-tools The following packages will be upgraded: initramfs-tools 1 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. 2 not fully installed or removed. Need to get 0 B/50.3 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y dpkg: dependency problems prevent configuration of initramfs-tools: initramfs-tools depends on initramfs-tools-bin (<< 0.99ubuntu13.1.1~); however: Version of initramfs-tools-bin on system is 0.99ubuntu13.3. dpkg: error processing initramfs-tools (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. dpkg: dependency problems prevent configuration of apparmor: apparmor depends on initramfs-tools; however: Package initramfs-tools is not configured yet. dpkg: error processing apparmor (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates it's a follow-up error from a previous failure. Errors were encountered while processing: initramfs-tools apparmor E: Sub-process /usr/bin/dpkg returned an error code (1) If I look at the policy behind initramfs-tools / bin I get: apt-cache policy initramfs-tools initramfs-tools: Installed: 0.99ubuntu13.1 Candidate: 0.99ubuntu13.3 Version table: 0.99ubuntu13.3 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 Packages *** 0.99ubuntu13.1 0 100 /var/lib/dpkg/status 0.99ubuntu13 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages apt-cache policy initramfs-tools-bin initramfs-tools-bin: Installed: 0.99ubuntu13.3 Candidate: 0.99ubuntu13.3 Version table: *** 0.99ubuntu13.3 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main amd64 Packages 100 /var/lib/dpkg/status 0.99ubuntu13 0 500 http://gb.archive.ubuntu.com/ubuntu/ precise/main amd64 Packages So the issue seems to be I have 0.99ubuntu13.3 for initramfs-tools-bin yet 0.99ubuntu13.1 for initramfs-tools, and can't upgrade to 0.99ubuntu13.3. I've performed apt-get clean/autoclean/install -f/upgrade -f many times but they won't resolve. I can think of only 2 other 'solutions': Edit the dpkg dependency list to trick it into doing the installation with a broken dependency. This seems very dodgy and it would be a last resort Downgrade both initramfs-tools and initramfs-tools-bin to 0.99ubuntu13 from the precise/main sources and hope that would get them in step. However I'm not sure if this will be possible, or whether it would introduce more issues. I'm not sure how this situation arise in the first place. /boot was 96% full; it's now 56% full (it's tiny - 64MB ... this is what I got from the hosting company). Can anyone offer advice please?

  Read the article

• Guest blog: A Closer Look at Oracle Price Analytics by Will Hutchinson

  - by Takin Babaei

  Overview:  Price Analytics helps companies understand how much of each sale goes into discounts, special terms, and allowances. This visibility lets sales management see the panoply of discounts and start seeing whether each discount drives desired behavior. In Price Analytics monitors parts of the quote-to-order process, tracking quotes, including the whole price waterfall and seeing which result in orders. The “price waterfall” shows all discounts between list price and “pocket price”. Pocket price is the final price the vendor puts in its pocket after all discounts are taken. The value proposition: Based on benchmarks from leading consultancies and companies I have talked to, where they have studied the effects of discounting and started enforcing what many of them call “discount discipline”, they find they can increase the pocket price by 0.8-3%. Yes, in today’s zero or negative inflation environment, one can, through better monitoring of discounts, collect what amounts to a price rise of a few percent. We are not talking about selling more product, merely about collecting a higher pocket price without decreasing quantities sold. Higher prices fall straight to the bottom line. The best reference I have ever found for understanding this phenomenon comes from an article from the September-October 1992 issue of Harvard Business Review called “Managing Price, Gaining Profit” by Michael Marn and Robert Rosiello of McKinsey & Co. They describe the outsized impact price management has on bottom line performance compared to selling more product or cutting variable or fixed costs. Price Analytics manages what Marn and Rosiello call “transaction pricing”, namely the prices of a given transaction, as opposed to what is on the price list or pricing according to the value received. They make the point that if the vendor does not manage the price waterfall, customers will, to the vendor’s detriment. It also discusses its findings that in companies it studied, there was no correlation between discount levels and any indication of customer value. I urge you to read this article. What Price Analytics does: Price analytics looks at quotes the company issues and tracks them until either the quote is accepted or rejected or it expires. There are prebuilt adapters for EBS and Siebel as well as a universal adapter. The target audience includes pricing analysts, product managers, sales managers, and VP’s of sales, marketing, finance, and sales operations. It tracks how effective discounts have been, the win rate on quotes, how well pricing policies have been followed, customer and product profitability, and customer performance against commitments. It has the concept of price waterfall, the deal lifecycle, and price segmentation built into the product. These help product and sales managers understand their pricing and its effectiveness on driving revenue and profit. They also help understand how terms are adhered to during negotiations. They also help people understand what segments exist and how well they are adhered to. To help your company increase its profits and revenues, I urge you to look at this product. If you have questions, please contact me. Will HutchinsonMaster Principal Sales Consultant – Analytics, Oracle Corp. Will Hutchinson has worked in the business intelligence and data warehousing for over 25 years. He started building data warehouses in 1986 at Metaphor, advancing to running Metaphor UK’s sales consulting area. He also worked in A.T. Kearney’s business intelligence practice for over four years, running projects and providing training to new consultants in the IT practice. He also worked at Informatica and then Siebel, before coming to Oracle with the Siebel acquisition. He became Master Principal Sales Consultant in 2009. He has worked on developing ROI and TCO models for business intelligence for over ten years. Mr. Hutchinson has a BS degree in Chemical Engineering from Princeton University and an MBA in Finance from the University of Chicago.

  Read the article

• Mass Metadata Updates with Folders

  - by Kyle Hatlestad

  With the release of WebCenter Content PS5, a new folder architecture called 'Framework Folders' was introduced.  This is meant to replace the folder architecture of 'Folders_g'.  While the concepts of a folder structure and access to those folders through Desktop Integration Suite remain the same, the underlying architecture of the component has been completely rewritten.  One of the main goals of the new folders is to scale better at large volumes and remove the limitations of 1000 content items or sub-folders within a folder.  Along with the new architecture, it has a new look and a few additional features have been added.  One of those features are Query Folders.  These are folders that are populated simply by a query rather then literally putting items within the folders.  This is something that the Library has provided, but it always took an administrator to define them through the Web Layout Editor.  Now users can quickly define query folders anywhere within the standard folder hierarchy.   Within this new Framework Folders is the very handy ability to do metadata updates.  It's similar to the Propagate feature in Folders_g, but there are some key differences that make this very flexible and much more powerful. It's used within regular folders and Query Folders.  So the content you're updating doesn't all have to be in the same folder...or a folder at all.   The user decides what metadata to propagate.  In Folders_g, the system administrator controls which fields will be propagated using a single administration page.  In Framework Folders, the user decides at that time which fields they want to update. You set the value you want on the propagation screen.  In Folders_g, it used the metadata defined on the parent folder to propagate.  With Framework Folders, you supply the new metadata value when you select the fields you want to update.  It does not have to be defined on the parent folder. Because of these differences, I think the new propagate method is much more useful.  Instead of always having to rely on Archiver or a custom spreadsheet, you can quickly do mass metadata updates right within folders.   Here are the basic steps to perform propagation. First create a folder for the propagation.  You can use a regular folder, but a Query Folder will work as well. Go into the folder to get the results.   In the Edit menu, select 'Propagate'. Select the check-box next to the field to update and enter the new value  Click the Propagate button. Once complete, a dialog will appear showing it is complete What's also nice is that the process happens asynchronously in the background which means you can browse to other pages and do other things while it is still working.  You aren't stuck on the page waiting for it to complete.  In addition, you can add a configuration flag to the server to turn on a status indicator icon.  Set 'FldEnableInProcessIndicator=1' and it will show a working icon as its doing the propagation. There is a caveat when using the propagation on a Query Folder.   While a propagation on a regular folder will update all of the items within that folder, a Query Folder propagation will only update the first 50 items.  So you may need to run it multiple times depending on the size...and have the query exclude the items as they get updated. One extra note...Framework Folders is offered as the default folder architecture in the PS5 release of WebCenter Content.  But if you are using WebCenter Content integrated with another product that makes use of folders (WebCenter Portal/Spaces, Fusion Applications, Primavera, etc), you'll need to continue using Folders_g until they are updated to use the new folders.

  Read the article

• Randomly placing items script not working - sometimes items spawn in walls, sometimes items spawn in weird locations

  - by Timothy Williams

  I'm trying to figure out a way to randomly spawn items throughout my level, however I need to make sure they won't spawn inside another object (walls, etc.) Here's the code I'm currently using, it's based on the Physics.CheckSphere(); function. This runs OnLevelWasLoaded(); It spawns the items perfectly fine, but sometimes items spawn partway in walls. And sometimes items will spawn outside of the SpawnBox range (no clue why it does that.) //This is what randomly generates all the items. void SpawnItems () { if (Application.loadedLevelName == "Menu" || Application.loadedLevelName == "End Demo") return; //The bottom corner of the box we want to spawn items in. Vector3 spawnBoxBot = Vector3.zero; //Top corner. Vector3 spawnBoxTop = Vector3.zero; //If we're in the dungeon, set the box to the dungeon box and tell the items we want to spawn. if (Application.loadedLevelName == "dungeonScene") { spawnBoxBot = new Vector3 (8.857f, 0, 9.06f); spawnBoxTop = new Vector3 (-27.98f, 2.4f, -15); itemSpawn = dungeonSpawn; } //Spawn all the items. for (i = 0; i != itemSpawn.Length; i ++) { spawnedItem = null; //Zeroes out our random location Vector3 randomLocation = Vector3.zero; //Gets the meshfilter of the item we'll be spawning MeshFilter mf = itemSpawn[i].GetComponent<MeshFilter>(); //Gets it's bounds (see how big it is) Bounds bounds = mf.sharedMesh.bounds; //Get it's radius float maxRadius = new Vector3 (bounds.extents.x + 10f, bounds.extents.y + 10f, bounds.extents.z + 10f).magnitude * 5f; //Set which layer is the no walls layer var NoWallsLayer = 1 << LayerMask.NameToLayer("NoWallsLayer"); //Use that layer as your layermask. LayerMask layerMask = ~(1 << NoWallsLayer); //If we're in the dungeon, certain items need to spawn on certain halves. if (Application.loadedLevelName == "dungeonScene") { if (itemSpawn[i].name == "key2" || itemSpawn[i].name == "teddyBearLW" || itemSpawn[i].name == "teddyBearLW_Admiration" || itemSpawn[i].name == "radio") randomLocation = new Vector3(Random.Range(spawnBoxBot.x, -26.96f), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(spawnBoxBot.z, -2.141f)); else randomLocation = new Vector3(Random.Range(spawnBoxBot.x, spawnBoxTop.x), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(-2.374f, spawnBoxTop.z)); } //Otherwise just spawn them in the box. else randomLocation = new Vector3(Random.Range(spawnBoxBot.x, spawnBoxTop.x), Random.Range(spawnBoxBot.y, spawnBoxTop.y), Random.Range(spawnBoxBot.z, spawnBoxTop.z)); //This is what actually spawns the item. It checks to see if the spot where we want to instantiate it is clear, and if so it instatiates it. Otherwise we have to repeat the whole process again. if (Physics.CheckSphere(randomLocation, maxRadius, layerMask)) spawnedItem = Instantiate(itemSpawn[i], randomLocation, Random.rotation); else i --; //If we spawned something, set it's name to what it's supposed to be. Removes the (clone) addon. if (spawnedItem != null) spawnedItem.name = itemSpawn[i].name; } } What I'm asking for is if you know what's going wrong with this code that it would spawn stuff in walls. Or, if you could provide me with links/code/ideas of a better way to check if an item will spawn in a wall (some other function than Physics.CheckSphere). I've been working on this for a long time, and nothing I try seems to work. Any help is appreciated.

  Read the article

• JCP Awards 10 Year Retrospective

  - by Heather VanCura

  As we celebrate 10 years of JCP Program Award recognition in 2012,  take a look back in the Retrospective article covering the history of the JCP awards.  Most recently, the JCP awards were  celebrated at JavaOne Latin America in Brazil, where SouJava was presented the JCP Member of the Year Award for 2012 (won jointly with the London Java Community) for their contributions and launch of the Global Adopt-a-JSR Program. This is also a good time to honor the JCP Award Nominees and Winners who have been designated as Star Spec Leads.  Spec Leads are key to the Java Community Process (JCP) program. Without them, none of the Java Specification Requests (JSRs) would have begun, much less completed and become implemented in shipping products.  Nominations for 2012 Start Spec Leads are now open until 31 December. The Star Spec Lead program recognizes Spec Leads who have repeatedly proven their merit by producing high quality specifications, establishing best practices, and mentoring others. The point of such honor is to endorse the good work that they do, showcase their methods for other Spec Leads to emulate, and motivate other JCP program members and participants to get involved in the JCP program. Ed Burns – A Star Spec Lead for 2009, Ed first got involved with the JCP program when he became co-Spec Lead of JSR 127, JavaServer Faces (JSF), a role he has continued through JSF 1.2 and now JSF 2.0, which is JSR 314. Linda DeMichiel – Linda thus involved in the JCP program from its very early days. She has been the Spec Lead on at least three JSRs and an EC member for another three. She holds a Ph.D. in Computer Science from Stanford University. Gavin King – Nominated as a JCP Outstanding Spec Lead for 2010, for his work with JSR 299. His endorsement said, “He was not only able to work through disputes and objections to the evolving programming model, but he resolved them into solutions that were more technically sound, and which gained support of its pundits.” Mike Milikich –  Nominated for his work on Java Micro Edition (ME) standards, implementations, tools, and Technology Compatibility Kits (TCKs), Mike was a 2009 Star Spec Lead for JSR 271, Mobile Information Device Profile 3. David Nuescheler – Serving as the CTO for Day Software, acquired by Adobe Systems, David has been a key player in the growth of the company’s global content management solution. In 2002, he became Spec Lead for JSR 170, Content Repository for Java Technology API, continuing for the subsequent version, JSR 283. Bill Shannon – A well-respected name in the Java community, Bill came to Oracle from Sun as a Distinguished Engineer and is still performing at full speed as Spec Lead for JSR 342, Java EE 7,  as an alternate EC member, and hands-on problem solver for the Java community as a whole. Jim Van Peursem – Jim holds a PhD in Computer Engineering. He was part of the Motorola team that worked with Sun labs on the Spotless VM that became the KVM. From within Motorola, Jim has been responsible for many aspects of Java technology deployment, from an independent Connected Limited Device Configuration (CLDC) and Mobile Information Device Profile (MIDP) implementations, to handset development, to working with the industry in defining many related standards. Participation in the JCP Program goes well beyond technical proficiency. The JCP Awards Program is an attempt to say “Thank You” to all of the JCP members, Expert Group Members, Spec Leads, and EC members who give their time to contribute to the evolution of Java technology.

  Read the article

• SOA Community Newsletter May 2014

  - by JuergenKress

  Registration for the Fusion Middleware Summer Camps 2014 is open – Register asap for one of our bootcamps August 4th – 8th 2014 in Lisbon. Please read details and pre-requisitions careful before you register. We expect that like in the past, the conference will be booked out soon! If you can’t make it to Lisbon attend our SOA Suite 11c free on-demand Bootcamp or  Managing the Complexity of IoT online trainings. With more than 5000 customers, SOA Suite Achieves Significant Customer Adoption and Industry Recognition.Thanks to all our SOA Specialized partners for making our joins SOA customers successful! As a summary of the Industrial SOA series we published the Podcast Show Notes: SOA and Cloud - Where's This Relationship Going? Make sure you use the Oracle Demo Systems for your customer presentations. The demo systems are hosted by Oracle and include complete scenarios based on the latest Middleware version like the new B2B SOA Suite Demo System! For local presentations without fast internet use the SOA/BPM 11.1.1.7.1 Virtual Machine and Case Management Sample. At our SOA Community Workspace (SOA Community membership required) you can get new IoT presentations for Location Based Offers for Banking & Whitepaper and online Webcast & Utility presentation. In this newsletter you will find many articles about OSB: OSB 11g – A Hands-on Tutorial & Using Split-Joins in OSB Services for parallel processing of messages & OSB, Service Callouts and OQL & Working with Oracle Security Token Service. Thanks for sharing all the additional SOA articles within the community: How to configure Oracle SOA/BPM task auto release & Controlling BPEL process flow at runtime & Upgrading to Oracle SOA Suite 11g PS6 (11.1.1.7)? Do this. & BPEL and BPM's performance monitoring using DMS & SOA 11g - Create RESTful Service In Oracle SOA & Wrong timezone causes TopLink warning in SOA suite. Highlight of the BPM and ACM section is the IDC BPM vendor report. The new bundle Patch including the ACM UI is now available. If you want to learn more about ACM, get the ACM training material at our SOA Community Workspace (SOA Community membership required). A great demo for your next BPM presentation is the BPM iPad app. It’s simpleMobile BPM is Not An Option. It’s a Necessity. Thanks for sharing all the additional BPM articles within the community: BPM update adds Case Management Web Interface and REST APIs & Implementing deadline functionality with Oracle Adaptive Case Management & BPM 11g Timeout Heuristics & Humantask Assignment: Names and Expressions Assignment via Rules. In our last section Architecture, it is all about design. Usability is a key factor for customer satisfaction, worth to spend some time and read the Simplified User Experience Design Patterns eBook. Great blueprint for your project! See you in Lisbon! To read the newsletter please visit www.tinyurl.com/soaNewsMay2014 (OPN Account required) To become a member of the SOA Partner Community please register at http://www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: newsletter,SOA Community newsletter,SOA Community,Oracle,OPN,Jürgen Kress

  Read the article

• SQL SERVER – Asynchronous Update and Timestamp – Check if Row Values are Changed Since Last Retrieve

  - by pinaldave

  Here is the question received just this morning. “Pinal, Our application is much different than other application you might have come across. In simple words, I would like to call it Asynchronous Updated Application. We need your quick opinion about one of the situation which we are facing. From business side: We have bidding system (similar to eBay but not exactly) and where multiple parties bid on one item, during the last few minutes of bidding many parties try to bid at the same time with the same price. When they hit submit, we would like to check if the original data which they retrieved is changed or not. If the original data which they have retrieved is the same, we will accept their new proposed price. If original data are changed, they will have to resubmit the data with new price. From technical side: We have a row which we retrieve in our application. Multiple users are retrieving the same row. Some of the users will update the value of the row and submit. However, only the very first user should be allowed to update the row and remaining all the users will have to re-fetch the row and updated it once again. We do not want to lock any record as that will create other problems. Do you have any solution for this kind of situation?” Fantastic Question. I believe there is good chance that we can use timestamp datatype in this kind of application. Before we continue let us see following simple example. USE tempdb GO CREATE TABLE SampleTable (ID INT, Col1 VARCHAR(100), TimeStampCol TIMESTAMP) GO INSERT INTO SampleTable (ID, Col1) VALUES (1, 'FirstVal') GO SELECT ID, Col1, TimeStampCol FROM SampleTable st GO UPDATE SampleTable SET Col1 = 'NextValue' GO SELECT ID, Col1, TimeStampCol FROM SampleTable st GO DROP TABLE SampleTable GO Now let us see the resultset. Here is the simple explanation of the scenario. We created a table with simple column with TIMESTAMP datatype. When we inserted a very first value the timestamp was generated. When we updated any value in that row, the timestamp was updated with the new value. Every single time when we update any value in the row, it will generate new timestamp value. Now let us apply this in an original question’s scenario. In that case multiple users are retrieving the same row. Everybody will have the same now same TimeStamp with them. Before any user update any value they should once again retrieve the timestamp from the table and compare with the timestamp they have with them. If both of the timestamp have the same value – the original row has not been updated and we can safely update the row with the new value. After initial update, now the row will contain a new timestamp. Any subsequent update to the same row should also go to the same process of checking the value of the timestamp they have in their memory. In this case, the timestamp from memory will be different from the timestamp in the row. This indicates that row in the table has changed and new updates should not be allowed. I believe timestamp can be very very useful in this kind of scenario. Is there any better alternative? Please leave a comment with the suggestion and I will post on the blog with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Windows Phone 7 Silverlight / XNA development talk

  - by subodhnpushpak

  Hi, I presented on Windows Phone 7 app development using Silverlight. Here are few pics from the event Windows Phone 7 development VIEW SLIDE SHOW DOWNLOAD ALL     I demonstrated the Visual studio, emulator capabilities/ features. An demo on Wp7 app communication with an OData Service, along with a demo on XNA app. There was lot of curious questions; I am listing them here because these keep on popping up again and again: 1. What tools does it takes to develop Wp7 app? Are they free? A typical WP7 app can be developed either using Silverlight or XNA. For developers, Visual Studio 2010 is a good choice as it provides an integrated development environment with lots of useful project templates; which makes the task really easy. For designers, Blend may be used to develop the UI in XAML. Both the tools are FREE (express version) to download and very intuitive to use. 2. What about the learning curve? If you know C#, (or any other programming language), learning curve is really flat. XAML (used for UI) may be new for you, but trust me; its very intuitive. Also you can use Microsoft Blend to generate the UI (XAML) for you. 3. How can I develop /test app without using actual device? How can I be sure my app runs as expected on actual device? The WP7 SDK comes along with an excellent emulator; which you can use for development/ testing on a computer. Later you can just change a setting and deploy the application on WP7. You will require Zune software for deploying the application on phone along with Developers key from WP7 marketplace. You can obtain key from marketplace by filling a form. The whole process for registering  is easy; just follow the steps on the site. 4. Which one should I use? Silverlight or XNA? Use Silverlight for enterprise/ business / utility apps. Use XNA for Games app. While each platform is capable / strong and may be used in conjunction as well; The methodologies used for development in these platforms are very different. XNA works on typical Do..While loop where as Silverlight works on event based methodology. 5. Where are the learning resources? Are they free? There is lots of stuff on WP7. Most of them are free. There is a excellent free book by Charles Petzold to download and http://www.microsoft.com/windowsphone is full of demos /todos / vidoes. All the exciting stuff was captured live and you can view it here; in case you were not able to catch it live!! @ http://livestre.am/AUfx. My talk starts from 3:19:00 timeline in the video!! Is there an app you miss on WP7? Do let me know about it and I may work on it for free !!! Keep discovering. Keep is Simple. WP7. Subodh

  Read the article

• How to Make the Gnome Panels in Ubuntu Totally Transparent

  - by The Geek

  We all love transparency, since it makes your desktop so beautiful and lovely—so today we’re going to show you how to apply transparency to the panels in your Ubuntu Gnome setup. It’s an easy process, and here’s how to do it. This article is the first part of a multi-part series on how to customize the Ubuntu desktop, written by How-To Geek reader and ubergeek, Omar Hafiz. Making the Gnome Panels Transparent Of course we all love transparency, It makes your desktop so beautiful and lovely. So you go for enabling transparency in your panels , you right click on your panel, choose properties, go to the Background tab and make your panel transparent. Easy right? But instead of getting a lovely transparent panel, you often get a cluttered, ugly panel like this: Fortunately it can be easily fixed, all we need to do is to edit the theme files. If your theme is one of those themes that came with Ubuntu like Ambiance then you’ll have to copy it from /usr/share/themes to your own .themes directory in your Home Folder. You can do so by typing the following command in the terminal cp /usr/share/themes/theme_name ~/.themes Note: don’t forget to substitute theme_name with the theme name you want to fix. But if your theme is one you downloaded then it is already in your .themes folder. Now open your file manager and navigate to your home folder then do to .themes folder. If you can’t see it then you probably have disabled the “View hidden files” option. Press Ctrl+H to enable it. Now in .themes you’ll find your previously copied theme folder there, enter it then go to gtk-2.0 folder. There you may find a file named “panel.rc”, which is a configuration file that tells your panel how it should look like. If you find it there then rename it to “panel.rc.bak”. If you don’t find don’t panic! There’s nothing wrong with your system, it’s just that your theme decided to put the panel configurations in the “gtkrc” file. Open this file with your favorite text editor and at the end of the file there is line that looks like this “include “apps/gnome-panel.rc””. Comment out this line by putting a hash mark # in front of it. Now it should look like this “# include “apps/gnome-panel.rc”” Save and exit the text editor. Now change your theme to any other one then switch back to the one you edited. Now your panel should look like this: Stay tuned for the second part in the series, where we’ll cover how to change the color and fonts on your panels. Latest Features How-To Geek ETC How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The Legend of Zelda – 1980s High School Style [Video] Suspended Sentence is a Free Cross-Platform Point and Click Game Build a Batman-Style Hidden Bust Switch Make Your Clock Creates a Custom Clock for your Android Homescreen Download the Anime Angels Theme for Windows 7 CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate

  Read the article

• My Dog, Cross-Channel Shopping, and Fusion SCM

  - by Kathryn Perry

  A guest post by Mark Carson, Director, Oracle Fusion Supply Chain Management I was walking my dog Max in an open space behind my house. As we tromped through the tall weeds I remembered it is tick season and that I should get Max some protection. While he sniffed merrily in the tick infested brush, I started shopping in the middle of an open field on my phone. I thought it would be convenient to pick up the tick medicine from a pet store on the way home. Searching the pet store website I saw that they had the medicine, but there was no information on whether the store had any in stock and there were no options for shipping it to the store for pickup. I could return it, but not pick it up which seamed kind of odd. I really didn't feel like making calls to the local stores to find out if they had it. Since the product is popular, I tried one of the large 'everything' stores. Browsing its website I could see that it could be shipped to me, shipped to the store for free, and that the store nearest to me had it in stock. Needless to say, this store became a better option. This experience is a small example of why retailers, distributors, and manufactures have placed a high priority on enabling 'cross-channel commerce.' Shoppers like you and me expect to be able to search, compare, buy and return products on-line and over the phone using a variety of devices including PDAs, tablets and in-store kiosks. The pet store lost my business because its web channel had limited information about its stores. I have spoken with many customers and prospects about cross-channel commerce. They all realize the business implications and urgency behind cross-channel commerce but recognize there are challenges to enable it. New and existing applications must be integrated together globally through a consistent cross-channel business process. Integration is required between applications that provide the initial shopping experience and delivery applications associated with warehouses, stores, and partners. The enablement must be accomplished in a flexible way to react to fast-changing product portfolios and new acquisitions, while at the same time minimizing costs through reuse of existing systems. Meanwhile, the business must continue to grow and decision makers need to balance new capability with peak seasons. The challenges above are not unique to retail. Any customer in any industry who has multiple points for capturing orders and multiple points for fulfilling orders will face these challenges. With this in mind, we had a unique opportunity in Fusion SCM to re-think how to build a set of modular and flexible applications in the order management space that would make these challenges easier to conquer. The results are Fusion Distributed Order Orchestration and Global Order Promising. These applications can help companies, such as the pet store, enable true cross-channel commerce. The apps provide highly adaptable and flexible business processes to automate order orchestration across multiple cross-channel systems. They also show a global view of supply across warehouses, stores, and partners for real-time availability and more accurate order promising. Additional capability includes a standards-based integration framework for seamless execution and the ability to reuse existing systems for faster and lower cost implementations. OK, that was a mouthful of features and benefits. As Max waited to cross the street (he can do basic math too), I wondered if he could relate. He does not care about leash laws, pick-up courtesy, where he can/can't walk, what time of day it is, or even ticks. He does not care about how all these things could make walking complicated. He just wants to walk. Similarly, customers just want to shop and companies just want to make it easier to sell and deliver. You can learn more about Distributed Order Orchestration and Global Order Promising in cross-channel here.

  Read the article

• Too Clever for My Own Good

  - by AjarnMark

  Yesterday I caught myself being a little too clever for my own good with some ASP.NET code.  It seems that I have forgotten some of my good old classic HTML and JavaScript skills, and become too dependent on the .NET Framework and WebControls to do the work for me.  Here’s the scenario… In order to improve the User Interface and better communicate to the user when something is happening that they need to wait for, we have started to modify some of our larger (slower) pages to display messages like Processing… or Reloading… while they are cycling through a postback.  (Yes, I understand this could be improved by using AJAX / Callbacks and so on, but even then, you need to let your user know that they need to wait for that section to be re-rendered, so for the moment these pages will continue to use good ol’ Postbacks.)  It’s a very simple trick, really.  All I want to do is when some control triggers a postback, first run a little client-side JavaScript to hide the main contents of the page (such as a GridView) and display the appropriate message.  This lets the user know, “Hey, we’re doing something, don’t click another link or scroll and try to take action right now.” The first places I hooked this up were easy.  Most common cause of a postback:  Buttons.  And when you’re writing the markup or declarative code for an ASP:Button control, there is the handy OnClientClick property which is designed for just this purpose…to run client-side JavaScript before the postback occurs.  This is distinguished from the OnClick property which tells the control what Server-side code to run.  Great!  Done!  Easy! But then there are other controls like DropDownLists and CheckBoxes that we use on our pages with the AutoPostback=True setting which cause postbacks.  And these don’t have OnClientClick or OnClientSelectedIndexChanged events.  So I started getting creative, using an ASP:CustomValidator control in conjunction with setting the CausesValidation and ValidationGroup settings on these controls, which basically caused the action on the control to fire the Custom Validator, which was defined with a Client Side validation function which then did the hide content/show message code (and return a meaningless IsValid setting).  This also caused me to define a different ValidationGroup setting for my real data entry validator controls so that I could control them separately and only have them fire when I really wanted validation, and not just my show/hide trick. For a little while I was pretty proud of myself for coming up with this clever approach to get around what I considered to be a serious oversight on the DropDownList and CheckBox controls declarative syntax.  Then, in the midst of my smugness, just as I was about to commit my changes to the source code repository, it dawned on me that there is a much simpler and much more appropriate way to accomplish this.  All that I really needed to do was to put in my server-side code (I used the Page_Init section) a call to MyControl.Attributes.Add(“onClick”, “myJavaScriptFunctionName()”) for the checkboxes, and for the DropDownLists (which become select tags) use “onChange” instead of “onClick”.  This is exactly the type of thing that the Attributes collection is there for…so you can add attributes to be rendered with the control that you would have otherwise stuck right into the HTML markup if you had been doing this by hand in the first place. Ugh!  A few hours wasted on clever tricks that I ended up completely removing, but I did learn a lot more about custom validators and validation groups in the process.  And got a good reminder that all that stuff (HTML, JavaScript, and CSS) I learned back when I wrote classic ASP pages is still valuable today.  Oh, and one more thing…don’t get lulled into too much reliance on the the whiz-bang tool to do it for you.  After all, WebControls are just another layer of abstraction, and sometimes you need to dig down through the layers and get a little closer to the native language.

  Read the article

• Joy! | Important Information About Your iPad 3G

  - by Jeff Julian

  Looks like I was one of the lucky 114,000 who AT&T lost their email to “hackers”.  Why is “hackers” in “double quotes”.  I can just imagine some executive at AT&T in their “Oh No, We Messed Up Meeting” saying, what happened?  Then someone replied, well we have had a breach and “hackers” broke in (using the quote in the air gesture) and stole our iPad 3G customers emails. Oh well, I am sure my email has been sold and sold again by many different vendors, why not AT&T now.  At least Dorothy Attwood could have gave us her email to give to someone else instead of blinking it through a newsletter system. June 13, 2010 Dear Valued AT&T Customer, Recently there was an issue that affected some of our customers with AT&T 3G service for iPad resulting in the release of their customer email addresses. I am writing to let you know that no other information was exposed and the matter has been resolved.  We apologize for the incident and any inconvenience it may have caused. Rest assured, you can continue to use your AT&T 3G service on your iPad with confidence. Here’s some additional detail: On June 7 we learned that unauthorized computer “hackers” maliciously exploited a function designed to make your iPad log-in process faster by pre-populating an AT&T authentication page with the email address you used to register your iPad for 3G service.  The self-described hackers wrote software code to randomly generate numbers that mimicked serial numbers of the AT&T SIM card for iPad – called the integrated circuit card identification (ICC-ID) – and repeatedly queried an AT&T web address.   When a number generated by the hackers matched an actual ICC-ID, the authentication page log-in screen was returned to the hackers with the email address associated with the ICC-ID already populated on the log-in screen. The hackers deliberately went to great efforts with a random program to extract possible ICC-IDs and capture customer email addresses.  They then put together a list of these emails and distributed it for their own publicity. As soon as we became aware of this situation, we took swift action to prevent any further unauthorized exposure of customer email addresses.  Within hours, AT&T disabled the mechanism that automatically populated the email address. Now, the authentication page log-in screen requires the user to enter both their email address and their password. I want to assure you that the email address and ICC-ID were the only information that was accessible. Your password, account information, the contents of your email, and any other personal information were never at risk.  The hackers never had access to AT&T communications or data networks, or your iPad.  AT&T 3G service for other mobile devices was not affected. While the attack was limited to email address and ICC-ID data, we encourage you to be alert to scams that could attempt to use this information to obtain other data or send you unwanted email. You can learn more about phishing by visiting the AT&T website. AT&T takes your privacy seriously and does not tolerate unauthorized access to its customers’ information or company websites.   We will cooperate with law enforcement in any investigation of unauthorized system access and to prosecute violators to the fullest extent of the law. AT&T acted quickly to protect your information – and we promise to keep working around the clock to keep your information safe.  Thank you very much for your understanding, and for being an AT&T customer. Sincerely, Dorothy Attwood Senior Vice President, Public Policy and Chief Privacy Officer for AT&T Technorati Tags: AT&T,iPad 3G,Email

  Read the article

• Sneak Peak: Social Developer Program at JavaOne

  - by Mike Stiles

  By guest blogger Roland Smart We're just days away from what is gunning to be the most exciting installment of OpenWorld to date, so how about an exciting sneak peak at the very first Social Developer Program? If your first thought is, "What's a social developer?" you're not alone. It’s an emerging term and one we think will gain prominence as social experiences become more prevalent in enterprise applications. For those who keep an eye on the ever-evolving Facebook platform, you'll recall that they recently rebranded their PDC (preferred developer consultant) group as the PMD (preferred marketing developer), signaling the importance of development resources inside the marketing organization to unlock the potential of social. The marketing developer they're referring to could be considered a social developer in a broader context. While it's true social has really blossomed in the marketing context and CMOs are winning more and more technical resources, social is starting to work its way more deeply into the enterprise with the help of developers that work outside marketing. Developers, like the rest of us, have fallen in "like" with social functionality and are starting to imagine how social can transform enterprise applications in the way it has consumer-facing experiences. The thesis of my presentation is that social developers will take many pages from the marketing playbook as they apply social inside the enterprise. To support this argument, lets walk through a range of enterprise applications and explore how consumer-facing social experiences might be interpreted in this context. Here's one example of how a social experience could be integrated into a sales enablement application. As a marketer, I spend a great deal of time collaborating with my sales colleagues, so I have good insight into their working process. While at Involver, we grew our sales team quickly, and it became evident some of our processes broke with scale. For example, we used to have weekly team meetings at which we'd discuss what was working and what wasn't from a messaging perspective. One aspect of these sessions focused on "objections" and "responses," where the salespeople would walk through common objections to purchasing and share appropriate responses. We tried to map each context to best answers and we'd capture these on a wiki page. As our team grew, however, participation at scale just wasn't tenable, and our wiki pages quickly lost their freshness. Imagine giving salespeople a place where they could submit common objections and responses for their colleagues to see, sort, comment on, and vote on. What you'd get is an up-to-date and relevant repository of information. And, if you supported an application like this with a social graph, it would be possible to make good recommendations to individual sales people about the objections they'd likely hear based on vertical, product, region or other graph data. Taking it even further, you could build in a badging/game element to reward those salespeople who participate the most. Both these examples are based on proven models at work inside consumer-facing applications. If you want to learn about how HR, Operations, Product Development and Customer Support can leverage social experiences, you’re welcome to join us at JavaOne or join our Social Developer Community to find some of the presentations after OpenWorld.

  Read the article

• Cellbi Silverlight Controls Giveaway (5 License to give away)

  - by mbcrump

  Cellbi recently updated their new Silverlight Controls to version 4 and to support Visual Studio 2010. I played with a couple of demos on their site and had to take a look. I headed over to their website and downloaded the controls. The first thing that I noticed was all of the special text effects and animations included. I emailed them asking if I could give away their controls in my January 2011 giveaway and they said yes. They also volunteered to give away 5 total license so the changes for you to win would increase.  I am very thankful they were willing to help the Silverlight community with this giveaway. So some quick rules below: ----------------------------------------------------------------------------------------------------------------------------------------------------------- Win a FREE developer’s license of Cellbi Silverlight Controls! (5 License to give away) Random winner will be announced on February 1st, 2011! To be entered into the contest do the following things: Subscribe to my feed. Leave a comment below with a valid email account (I WILL NOT share this info with anyone.) Retweet the following : I just entered to win free #Silverlight controls from @mbcrump and @cellbi http://mcrump.me/cscfree ! Don’t change the URL because this will allow me to track the users that Tweet this page. Don’t forget to visit Cellbi because they made this possible. ---------------------------------------------------------------------------------------------------------------------------------------------------------- Before we get started with the Silverlight Controls, here is a couple of links to bookmark: The What's new in this release page is here. You can also check out the live demos here. Don’t worry about the Samples/Help Documentation. That is installed to your local HDD during the installation process. Begin by downloading the trial version and running the program. After everything is installed then you will see the following screen: After it is installed, you may want to take a look at your Toolbox in Visual Studio 2010. After you add the controls from the “Choose Items” in Silverlight and you will see that you now have access to all of these controls. At this point, to use the controls it’s as simple as drag/drop onto your Silverlight container. It will create the proper Namespaces for you. It’s hard to show with a static screenshot just how powerful the controls actually are so I will refer you to the demo page to learn more about them. Since all of these are animations/effects it just doesn’t work with a static screenshot. It is worth noting that the Sfx pack really focuses on the following core effects: I will show you the best route to get started building a new project with them below. The best page to start is the sample browser which you can access by going to SvFx Launcher. In my case, I want to build a new Carousel. I simple navigate to the Carousel that I want to build and hit the “Cs” code at the top. This launches Visual Studio 2010 and now I can copy/paste the XAML into my project. That is all there is to it. Hopefully this post was helpful and don’t forget to leave a comment below in order to win a set of the controls!  Subscribe to my feed

  Read the article

• Item cannot be installed or removed until the package catalogue is repaired

  - by Alex Thorne

  After installing Microsoft Windows Compatibility Layer (meta-package) i receive an error Item cannot be installed or removed until the package catalogue is repaired. Do you want to repair it Ok, I thought... I'll just click repair and be done with it. After doing so I receive another error. The full text reads: installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 212945 files and directories currently installed.) Unpacking libasound2:i386 (from .../libasound2_1.0.25-1ubuntu10_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libasound2_1.0.25-1ubuntu10_i386.deb (--unpack): './usr/share/alsa/cards/ICE1712.conf' is different from the same file on the system dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libasound2_1.0.25-1ubuntu10_i386.deb Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) dpkg: dependency problems prevent configuration of wine1.4-i386:i386: wine1.4-i386:i386 depends on libasound2 (>= 1.0.23); however: Package libasound2:i386 is not installed. dpkg: error processing wine1.4-i386:i386 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine1.4: wine1.4 depends on wine1.4-i386 (= 1.4-0ubuntu4); however: Package wine1.4-i386 is not installed. Package wine1.4-i386:i386 is not configured yet. dpkg: error processing wine1.4 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine: wine depends on wine1.4; however: Package wine1.4 is not configured yet. dpkg: error processing wine (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine1.4-common: wine1.4-common depends on wine1.4 (= 1.4-0ubuntu4); however: Package wine1.4 is not configured yet. dpkg: error processing wine1.4-common (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of wine1.4-amd64: wine1.4-amd64 depends on wine1.4-common (= 1.4-0ubuntu4); however: Package wine1.4-common is not configured yet. dpkg: error processing wine1.4-amd64 (--configure): dependency problems - leaving unconfigured So I click OK and now I'm back to previous screen ("Item cannot be installed ...") I click on cancel and go to the red circle on the top right on my screen and try to update from there and receive this error After that I just get thrown these errors So now I can't add or remove any programs on my system. Does anyone have any idea how to fix this?

  Read the article

• How the number of indexes built on a table can impact performances?

  - by Davide Mauri

  We all know that putting too many indexes (I’m talking of non-clustered index only, of course) on table may produce performance problems due to the overhead that each index bring to all insert/update/delete operations on that table. But how much? I mean, we all agree – I think – that, generally speaking, having many indexes on a table is “bad”. But how bad it can be? How much the performance will degrade? And on a concurrent system how much this situation can also hurts SELECT performances? If SQL Server take more time to update a row on a table due to the amount of indexes it also has to update, this also means that locks will be held for more time, slowing down the perceived performance of all queries involved. I was quite curious to measure this, also because when teaching it’s by far more impressive and effective to show to attended a chart with the measured impact, so that they can really “feel” what it means! To do the tests, I’ve create a script that creates a table (that has a clustered index on the primary key which is an identity column) , loads 1000 rows into the table (inserting 1000 row using only one insert, instead of issuing 1000 insert of one row, in order to minimize the overhead needed to handle the transaction, that would have otherwise ), and measures the time taken to do it. The process is then repeated 16 times, each time adding a new index on the table, using columns from table in a round-robin fashion. Test are done against different row sizes, so that it’s possible to check if performance changes depending on row size. The result are interesting, although expected. This is the chart showing how much time it takes to insert 1000 on a table that has from 0 to 16 non-clustered indexes. Each test has been run 20 times in order to have an average value. The value has been cleaned from outliers value due to unpredictable performance fluctuations due to machine activity. The test shows that in a  table with a row size of 80 bytes, 1000 rows can be inserted in 9,05 msec if no indexes are present on the table, and the value grows up to 88 (!!!) msec when you have 16 indexes on it This means a impact on performance of 975%. That’s *huge*! Now, what happens if we have a bigger row size? Say that we have a table with a row size of 1520 byte. Here’s the data, from 0 to 16 indexes on that table: In this case we need near 22 msec to insert 1000 in a table with no indexes, but we need more that 500msec if the table has 16 active indexes! Now we’re talking of a 2410% impact on performance! Now we can have a tangible idea of what’s the impact of having (too?) many indexes on a table and also how the size of a row also impact performances. That’s why the golden rule of OLTP databases “few indexes, but good” is so true! (And in fact last week I saw a database with tables with 1700bytes row size and 23 (!!!) indexes on them!) This also means that a too heavy denormalization is really not a good idea (we’re always talking about OLTP systems, keep it in mind), since the performance get worse with the increase of the row size. So, be careful out there, and keep in mind the “equilibrium” is the key world of a database professional: equilibrium between read and write performance, between normalization and denormalization, between to few and too may indexes. PS Tests are done on a VMWare Workstation 7 VM with 2 CPU and 4 GB of Memory. Host machine is a Dell Precsioni M6500 with i7 Extreme X920 Quad-Core HT 2.0Ghz and 16Gb of RAM. Database is stored on a SSD Intel X-25E Drive, Simple Recovery Model, running on SQL Server 2008 R2. If you also want to to tests on your own, you can download the test script here: Open TestIndexPerformance.sql

  Read the article

• OEG11gR2 integration with OES11gR2 Authorization with condition

  - by pgoutin

  Introduction This OES use-case has been defined originally by Subbu Devulapalli (http://accessmanagement.wordpress.com/).  Based on this OES museum use-case, I have developed the OEG11gR2 policy able to deal with the OES authorization with condition. From an OEG point of view, the way to deal with OES condition is to provide with the OES request some Environmental / Context Attributes.   Museum Use-Case  All painting in the museum have security sensors, an alarm goes off when a person comes too close a painting. The employee designated for maintenance needs to use their ID and disable the alarm before maintenance. You are the Security Administrator for the museum and you have been tasked with creating authorization policies to manage authorization for different paintings. Your first task is to understand how paintings are organized. Asking around, you are surprised to see that there isno formal process in place, so you need to start from scratch. the museum tracks the following attributes for each painting 1. Name of the work 2. Painter 3. Condition (good/poor) 4. Cost You compile the list of paintings  Name of Painting  Painter  Paint Condition  Cost  Mona Lisa  Leonardo da Vinci  Good  100  Magi  Leonardo da Vinci  Poor  40  Starry Night  Vincent Van Gogh  Poor  75  Still Life  Vincent Van Gogh  Good  25 Being a software geek who doesn’t (yet) understand art, you feel that price(or insurance price) of a painting is the most important criteria. So you feel that based on years-of-experience employees can be tasked with maintaining different paintings. You decide that paintings worth over 50 cost should be only handled by employees with over 20 years of experience and employees with less than 10 years of experience should not handle any painting. Lets us start with policy modeling. All paintings have a common set of attributes and actions, so it will be good to have them under a single Resource Type. Based on this resource type we will create the actual resources. So our high level model is: 1) Resource Type: Painting which has action manage and the following four attributes a) Name of the work b) Painter c) Condition (good/poor) d) Cost 2) To keep things simple lets use painting name for Resource name (in real world you will try to use some identifier which is unique, because in future we may end up with more than one painting which has the same name.) 3) Create Resources based on the previous table 4) Create an identity attribute Experience (Integer) 5) Create the following authorization policies a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience OES Authorization Configuration We do need to create 2 authorization policies with specific conditions a) Allow employees with over 20 years experience to access all paintings b) Allow employees with 10 – 20 years of experience to access painting which cost less than 50 c) Deny access to all paintings for employees with less than 10 year of experience We don’t need an explicit policy for Deny access to all paintings for employees with less than 10 year of experience, because Oracle Entitlements Server will automatically deny if there is no matching policy. OEG Policy The OEG policy looks like the following The 11g Authorization filter configuration is similar to :  The ${PAINTING_NAME} and ${USER_EXPERIENCE} variables are initialized by the "Retrieve from the HTTP header" filters for testing purpose. That's to say, under Service Explorer, we need to provide 2 attributes "Experience" & "Painting" following the OES 11g Authorization filter described above.

  Read the article

• CacheAdapter 2.4 – Bug fixes and minor functional update

  - by Glav

  Note: If you are unfamiliar with the CacheAdapter library and what it does, you can read all about its awesome ability to utilise memory, Asp.Net Web, Windows Azure AppFabric and memcached caching implementations via a single unified, simple to use API from here and here.. The CacheAdapter library is receiving an update to version 2.4 and is currently available on Nuget here. Update: The CacheAdapter has actualy just had a minor revision to 2.4.1. This significantly increases the performance and reliability in memcached scenario under more extreme loads. General to moderate usage wont see any noticeable difference though. Bugs This latest version fixes a big that is only present in the memcached implementation and is only seen in rare, intermittent times (making i particularly hard to find). The bug is where a cache node would be removed from the farm when errors in deserialization of cached objects would occur due to serialised data not being read from the stream in entirety. The code also contains enhancements to better surface serialization exceptions to aid in the debugging process. This is also specifically targeted at the memcached implementation. This is important when moving from something like memory or Asp.Web caching mechanisms to memcached where the serialization rules are not as lenient. There are a few other minor bug fixes, code cleanup and a little refactoring. Minor feature addition In addition to this bug fix, many people have asked for a single setting to either enable or disable the cache.In this version, you can disable the cache by setting the IsCacheEnabled flag to false in the application configuration file. Something like the example below: <Glav.CacheAdapter.MainConfig> <setting name="CacheToUse" serializeAs="String"> <value>memcached</value> </setting> <setting name="DistributedCacheServers" serializeAs="String"> <value>localhost:11211</value> </setting> <setting name="IsCacheEnabled" serializeAs="String"> <value>False</value> </setting> </Glav.CacheAdapter.MainConfig> Your reasons to use this feature may vary (perhaps some performance testing or problem diagnosis). At any rate, disabling the cache will cause every attempt to retrieve data from the cache, resulting in a cache miss and returning null. If you are using the ICacheProvider with the delegate/Func<T> syntax to populate the cache, this delegate method will get executed every single time. For example, when the cache is disabled, the following delegate/Func<T> code will be executed every time: var data1 = cacheProvider.Get<SomeData>("cache-key", DateTime.Now.AddHours(1), () => { // With the cache disabled, this data access code is executed every attempt to // get this data via the CacheProvider. var someData = new SomeData() { SomeText = "cache example1", SomeNumber = 1 }; return someData; }); One final note: If you access the cache directly via the ICache instance, instead of the higher level ICacheProvider API, you bypass this setting and still access the underlying cache implementation. Only the ICacheProvider instance observes the IsCacheEnabled setting. Thanks to those individuals who have used this library and provided feedback. Ifyou have any suggestions or ideas, please submit them to the issue register on bitbucket (which is where you can grab all the source code from too)

  Read the article

• Lease Accounting Closed for Comment

  - by Theresa Hickman

  December 15, 2010 marked the last day to send public comments to FASB and IASB on lease accounting. June 2011 is the deadline for the final consideration of the Leases Exposure Draft that will be given to standard setters in order to create a new lease accounting standard. Landlords, lessees, retailers, airlines industry, etc. are all worried right now about the changes to lease accounting. They feel the changes will be too costly and complex without adding significant improvement to the quality and relevance of financial statements. In a nutshell, IASB and FASB want to abolish operating leases where the lessee records the periodic payments as an expense over time. The proposed changes will mean that the accounting for leases will move from the P&L and hit both the lessee's and lessor's balance sheets. For companies that occupy a lot of property, this could significantly increase their liabilities not to mention front-load much of the costs that they were able to spread out over time before. Why are IASB and FASB doing this? Their goal is to have consistent accounting for both the lessees and lessors with higher quality financial statements. Leasing is one of four major projects being undertaken by the IASB and FASB in order to complete convergence between US GAAP and IFRS. I spoke to our resident accounting expert Seamus Moran about this to better understand how this might impact accounting software. He reminded me that the proposed changes to both US GAAP and IFRS in respect to leases are "proposed." It is still inappropriate to account for leases the way they are being proposed and we still need to account for them in accordance to the current regulations, which is what current accounting software programs, such as E-Business Suite Release 12.1 and prior and PeopleSoft Enterprise support. The FASB (US GAAP) and IASB (IFRS) exposure drafts (EDs) that outline the proposal were published. The FASB edition was published on August 17th, with comments due by December 15th. The IASB edition was published on the same date, and comments were due in London on the same date. Exposure drafts are the method both the FASB and the IASB use to solicit General Acceptance, the "GA" in GAAP. Both Boards will consider the input they have received, and perhaps revise the proposal. The proposal has come in for some criticism, both from the finance houses and the uses of the leased assets. There is, given the opposition to it, an excellent chance that the Leasing proposal will be modified or rewritten. We will know this in about six months, the usual time it takes for the FASB and IASB to digest the comments they receive. If they feel the proposal has General Acceptance, they will issue the final Standard at that time; if not, they will issue a revised proposal with another year of comment of drafting. Oracle participates in the standard setting process and is fully aware of the leasing proposal. We have designs that would reflect the proposal in hand. These designs will be finalized when the proposal is finalized. It is likely that customers will develop new financial arrangements if the proposal is finalized, and we are working with customers and partners to stay in touch with people's business responses to the proposal. The IASB and FASB are aware that ERP companies will have to revise their software, and that the companies filing results under IFRS or under US GAAP will have to implement such software. The form and timing of the release of the updated software will depend on the schedule of the take up of the new standard, the complexity of the standard, and the releases supported at the time the standard becomes effective.

  Read the article

• An Unusual UpdatePanel

  - by João Angelo

  The code you are about to see was mostly to prove a point, to myself, and probably has limited applicability. Nonetheless, in the remote possibility this is useful to someone here it goes… So this is a control that acts like a normal UpdatePanel where all child controls are registered as postback triggers except for a single control specified by the TriggerControlID property. You could basically achieve the same thing by registering all controls as postback triggers in the regular UpdatePanel. However with this, that process is performed automatically. Finally, here is the code: public sealed class SingleAsyncTriggerUpdatePanel : WebControl, INamingContainer { public string TriggerControlID { get; set; } [TemplateInstance(TemplateInstance.Single)] [PersistenceMode(PersistenceMode.InnerProperty)] public ITemplate ContentTemplate { get; set; } public override ControlCollection Controls { get { this.EnsureChildControls(); return base.Controls; } } protected override void CreateChildControls() { if (string.IsNullOrWhiteSpace(this.TriggerControlID)) throw new InvalidOperationException( "The TriggerControlId property must be set."); this.Controls.Clear(); var updatePanel = new UpdatePanel() { ID = string.Concat(this.ID, "InnerUpdatePanel"), ChildrenAsTriggers = false, UpdateMode = UpdatePanelUpdateMode.Conditional, ContentTemplate = this.ContentTemplate }; updatePanel.Triggers.Add(new SingleControlAsyncUpdatePanelTrigger { ControlID = this.TriggerControlID }); this.Controls.Add(updatePanel); } } internal sealed class SingleControlAsyncUpdatePanelTrigger : UpdatePanelControlTrigger { private Control target; private ScriptManager scriptManager; public Control Target { get { if (this.target == null) { this.target = this.FindTargetControl(true); } return this.target; } } public ScriptManager ScriptManager { get { if (this.scriptManager == null) { var page = base.Owner.Page; if (page != null) { this.scriptManager = ScriptManager.GetCurrent(page); } } return this.scriptManager; } } protected override bool HasTriggered() { string asyncPostBackSourceElementID = this.ScriptManager.AsyncPostBackSourceElementID; if (asyncPostBackSourceElementID == this.Target.UniqueID) return true; return asyncPostBackSourceElementID.StartsWith( string.Concat(this.target.UniqueID, "$"), StringComparison.Ordinal); } protected override void Initialize() { base.Initialize(); foreach (Control control in FlattenControlHierarchy(this.Owner.Controls)) { if (control == this.Target) continue; bool isApplicableControl = false; isApplicableControl |= control is INamingContainer; isApplicableControl |= control is IPostBackDataHandler; isApplicableControl |= control is IPostBackEventHandler; if (isApplicableControl) { this.ScriptManager.RegisterPostBackControl(control); } } } private static IEnumerable<Control> FlattenControlHierarchy( ControlCollection collection) { foreach (Control control in collection) { yield return control; if (control.Controls.Count > 0) { foreach (Control child in FlattenControlHierarchy(control.Controls)) { yield return child; } } } } } You can use it like this, meaning that only the B2 button will trigger an async postback: <cc:SingleAsyncTriggerUpdatePanel ID="Test" runat="server" TriggerControlID="B2"> <ContentTemplate> <asp:Button ID="B1" Text="B1" runat="server" OnClick="Button_Click" /> <asp:Button ID="B2" Text="B2" runat="server" OnClick="Button_Click" /> <asp:Button ID="B3" Text="B3" runat="server" OnClick="Button_Click" /> <asp:Label ID="LInner" Text="LInner" runat="server" /> </ContentTemplate> </cc:SingleAsyncTriggerUpdatePanel>

  Read the article

• BI&EPM in Focus June 2012

  - by Mike.Hallett(at)Oracle-BI&EPM

  General News Thomas Kurian Discusses Oracle Exalytics, SAP HANA (replay | preso | press)  Accenture & Oracle Study: The Challenges of Corporate Financial Reporting  (link) Flash Demo: Oracle Hyperion Planning on Exalytics in the Public Sector (link) Flash Demo: OBIEE & Exalytics in Retail (link) Customers Italian Partner Alfa Sistemi implemented at Autovie Venete S.p.A. Integrates Business Intelligence and Performance Management to Improve Efficiency and Speed for Managing Public Works Projects (English version)  / Autovie Venete implementa un sistema integrato di Business Intelligence e Performance Management per migliorare l’efficienza e la tempestività dell’attività di Controlling di Commessa (Italian version). FANCL Gains 360-Degree View of Customers across Multiple Sales Channels, Reduces Reports by 75% Korea Yakult Improves Profit & Loss Analysis with Oracle Hyperion Planning and OBIEE Hill International Streamlines Forecasting, Improves Visibility into Project Productivity and Profitability Children’s Rights in Society Better Supports Organizational Mission with Advanced, Integrated, and Streamlined Business Intelligence Tools Profit: International utility Enel monitors the performance of global subsidiaries with Oracle Hyperion Applications (link) Profit: Charting a New Course: Korean Air gains altitude by leveraging its greatest asset: information (link)   Events June 12: Breaking Away from the Excel Add-In: Welcome to Hyperion Smart View 11.1.2.2 (link) June 13: Upgrading OBIEE 10g to 11g: Best Practices and Lessons Learned (performance architects) (link) June 14, The Netherlands: Strategies for Business Excellence, New Release of Oracle Hyperion EPM Suite (link) June 21: Comprehensive and Accurate Forecasting for Healthcare (link) June 26: What Exactly is Exalytics? (KPI Partners) (link) Webcast Replay: Is Your Company Able to Navigate Through Market Volatility? (link)  Webcast Replay: Is Hope and Email The Core of Your Reconciliation Process? (link) Webcast Replay: Troubleshooting EPM Reporting & Analysis 11.1.2.x  (link) Webcast Replay: Is your Organization Flying Blind when it comes to Understanding Profitability?  (link) Enterprise Performance Management Final Oracle EPM  Information Panel (CIP) survey on cost, profitability and performance reporting/scorecards is now OPEN (link) New on EPM Blog: What's Going on With IFRS? (link) How does Crystal Ball integrate with EPM Solutions? New collateral and demos on Crystal Ball Solution Factory!  (link) New Youtube Video: Business Case Analysis with Oracle Crystal Ball (link) Crystal Ball 11.1.2.2 is released! Grouped Assumptions in Sensitivity Charts, Data Filtering When Fitting Distributions and Parameter Edits When Fitting Distributions to name a few. Get full details from the online New Features Guide (link) New DRM Oracle-by-Examples now available (link) Support Blog: Hyperion Ledgerlink Sample Record and Windows 7: Now you see it, now you don’t  (link) Use Enterprise Manager FMW Control to Troubleshoot Oracle EPM 11.1.2 Family of Products (link) Business  Intelligence Whitepaper: Real-Time Operational Reporting for E-Business Suite via GoldenGate Replication to an Operational Data Store.  How Oracle enabled real-time operational reporting for its $20B services contract business with Golden Gate & OBIEE (link) KPI Partners ebook: Understanding Oracle BI Components and Repository Modeling Basics (link) “Getting Started with Oracle Endeca Information Discovery” video tutorials now available (link) Oracle BI Publisher Conversion Center: Convert from Crystal, Actuate, or Oracle Reports to Oracle BI Publisher (link) Oracle Fusion Applications: Monthly Partner Updates Webcast Replays to help BI partners understand how OBI, Essbase, BI-Apps and Fusion work together: More on Fusion CRM: Fusion Marketing More on Fusion CRM: Fusion CRM Sales Start-Up Packs and Expert Services for Implementation Partners Introducing the Oracle Fusion Accounting Hub Implementing Fusion Applications using Oracle's Composers Oracle Fusion Applications Co-Existence

  Read the article

• Introducing the First Global Web Experience Management Content Management System

  - by kellsey.ruppel

  By Calvin Scharffs, VP of Marketing and Product Development, Lingotek Globalizing online content is more important than ever. The total spending power of online consumers around the world is nearly $50 trillion, a recent Common Sense Advisory report found. Three years ago, enterprises would have to translate content into 37 language to reach 98 percent of Internet users. This year, it takes 48 languages to reach the same amount of users.  For companies seeking to increase global market share, “translate frequently and fast” is the name of the game. Today’s content is dynamic and ever-changing, covering the gamut from social media sites to company forums to press releases. With high-quality translation and localization, enterprises can tailor content to consumers around the world.  Speed and Efficiency in Translation When it comes to the “frequently and fast” part of the equation, enterprises run into problems. Professional service providers provide translated content in files, which company workers then have to manually insert into their CMS. When companies update or edit source documents, they have to hunt down all the translated content and change each document individually.  Lingotek and Oracle have solved the problem by making the Lingotek Collaborative Translation Platform fully integrated and interoperable with Oracle WebCenter Sites Web Experience Management. Lingotek combines best-in-class machine translation solutions, real-time community/crowd translation and professional translation to enable companies to publish globalized content in an efficient and cost-effective manner. WebCenter Sites Web Experience Management simplifies the creation and management of different types of content across multiple channels, including social media.  Globalization Without Interrupting the Workflow The combination of the Lingotek platform with WebCenter Sites ensures that process of authoring, publishing, targeting, optimizing and personalizing global Web content is automated, saving companies the time and effort of manually entering content. Users can seamlessly integrate translation into their WebCenter Sites workflows, optimizing their translation and localization across web, social and mobile channels in multiple languages. The original structure and formatting of all translated content is maintained, saving workers the time and effort involved with inserting the text translation and reformatting.  In addition, Lingotek’s continuous publication model addresses the dynamic nature of content, automatically updating the status of translated documents within the WebCenter Sites Workflow whenever users edit or update source documents. This enables users to sync translations in real time. The translation, localization, updating and publishing of Web Experience Management content happens in a single, uninterrupted workflow.  The net result of Lingotek Inside for Oracle WebCenter Sites Web Experience Management is a system that more than meets the need for frequent and fast global translation. Workflows are accelerated. The globalization of content becomes faster and more streamlined. Enterprises save time, cost and effort in translation project management, and can address the needs of each of their global markets in a timely and cost-effective manner.  About Lingotek Lingotek is an Oracle Gold Partner and is going to be one of the first Oracle Validated Integrator (OVI) partners with WebCenter Sites. Lingotek is also an OVI partner with Oracle WebCenter Content.  Watch a video about how Lingotek Inside for Oracle WebCenter Sites works! Oracle WebCenter will be hosting a webinar, “Hitachi Data Systems Improves Global Web Experiences with Oracle WebCenter," tomorrow, September 13th. To attend the webinar, please register now! For more information about Lingotek for Oracle WebCenter, please visit http://www.lingotek.com/oracle.

  Read the article

• How to Mentor a Junior Developer

  - by Josh Johnson

  This title is a little broad but I may need to give a little background before I can ask my question properly. I know that similar questions have been asked here already. But in my case I'm not asking if I should be mentoring someone or if the person is a good fit for being a software developer. That is not my place to judge. I have not been asked outright, but it is apparent that myself and other fellow senior developers are to mentor the new developers that start here. I have no problem with this whatsoever and, in many cases, it lends me a fresh perspective on things and I end up learning in the process. Also, I remember how beneficial it was in the beginning of my career when someone would take some time to teach me something. When I say "new developer" they could be anywhere from fresh out of college to having a year or two of experience. Recently and in the past we've had people start here who seem to have an attitude toward development/programming which is different from mine and hard for me to reconcile; they seem to extract just enough information to get the task done but not really learn from it. I find myself going over and over the same issues with them. I understand that part of this could be a personality thing, but I feel it's my job to do my best and sort of push them out of the nest while they're under my wing, so to speak. How can I impart just enough information so that they will learn but not give so much as to solve the problem for them? Or perhaps: What's the proper response to questions that are designed to take the path of least resistance and, in essence, force them to learn instead of take the easy way out? These questions are probably more general teaching questions and don't have that much to do specifically with software development. Note: I do not get a say in what tasks they are working on. Management doles the task out and it could be anything from a very simple bug fix to starting an entire application by themselves. While this is not ideal by any means and obviously presents its own gauntlet of challenges, I feel it's a topic best left for another question. So the best I can do is help them with the problem at hand and try to help them break it down into simpler problems and also check their commit logs and point out mistakes that they made. My main objectives are to: Help them out and give them the tools they need to start becoming more self-reliant. Steer them in the right direction and break bad development habits early on. Lessen the amount of time I spend with them (the personality type described above seems to need much more one-on-one time and does not do well over IM or email. While that's generally fine, I can't always stop what I'm working on, break my stride, and help them debug an error on a moments notice; I have my own projects that need to get done).

  Read the article

• How Do You Actually Model Data?

  Since the 1970’s Developers, Analysts and DBAs have been able to represent concepts and relations in the form of data through the use of generic symbols.  But what is data modeling?  The first time I actually heard this term I could not understand why anyone would want to display a computer on a fashion show runway. Hey, what do you expect? At that time I was a freshman in community college, and obviously this was a long time ago.  I have since had the chance to learn what data modeling truly is through using it. Data modeling is a process of breaking down information and/or requirements in to common categories called objects. Once objects start being defined then relationships start to form based on dependencies found amongst other existing objects.  Currently, there are several tools on the market that help data designer actually map out objects and their relationships through the use of symbols and lines.  These diagrams allow for designs to be review from several perspectives so that designers can ensure that they have the optimal data design for their project and that the design is flexible enough to allow for potential changes and/or extension in the future. Additionally these basic models can always be further refined to show different levels of details depending on the target audience through the use of three different types of models. Conceptual Data Model(CDM)Conceptual Data Models include all key entities and relationships giving a viewer a high level understanding of attributes. Conceptual data model are created by gathering and analyzing information from various sources pertaining to a project during the typical planning phase of a project. Logical Data Model (LDM)Logical Data Models are conceptual data models that have been expanded to include implementation details pertaining to the data that it will store. Additionally, this model typically represents an origination’s business requirements and business rules by defining various attribute data types and relationships regarding each entity. This additional information can be directly translated to the Physical Data Model which reduces the actual time need to implement it. Physical Data Model(PDMs)Physical Data Model are transformed Logical Data Models that include the necessary tables, columns, relationships, database properties for the creation of a database. This model also allows for considerations regarding performance, indexing and denormalization that are applied through database rules, data integrity. Further expanding on why we actually use models in modern application/database development can be seen in the benefits that data modeling provides for data modelers and projects themselves, Benefits of Data Modeling according to Applied Information Science Abstraction that allows data designers remove concepts and ideas form hard facts in the form of data. This gives the data designers the ability to express general concepts and/or ideas in a generic form through the use of symbols to represent data items and the relationships between the items. Transparency through the use of data models allows complex ideas to be translated in to simple symbols so that the concept can be understood by all viewpoints and limits the amount of confusion and misunderstanding. Effectiveness in regards to tuning a model for acceptable performance while maintaining affordable operational costs. In addition it allows systems to be built on a solid foundation in terms of data. I shudder at the thought of a world without data modeling, think about it? Data is everywhere in our lives. Data modeling allows for optimizing a design for performance and the reduction of duplication. If one was to design a database without data modeling then I would think that the first things to get impacted would be database performance due to poorly designed database and there would be greater chances of unnecessary data duplication that would also play in to the excessive query times because unneeded records would need to be processed. You could say that a data designer designing a database is like a box of chocolates. You will never know what kind of database you will get until after it is built.

  Read the article

< Previous Page | 810 811 812 813 814 815 816 817 818 819 820 821  | Next Page >