Search Results

Search found 26693 results on 1068 pages for 'back to basics'.

Page 816/1068 | < Previous Page | 812 813 814 815 816 817 818 819 820 821 822 823  | Next Page >

• Boot drive not found issue after cloning using Apricorn EZgig

  - by TomWilsonFL

  A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

  Read the article

• Ubuntu server crashes; need help figuring how to figure out why

  - by neezer

  I have a 768 Slice at slicehost.com running Ubuntu Server 8.04.2 LTS (hardy) with a LAMP stack on it that periodically crashes, though why I am not sure. From what I can tell, there is a process that basically goes rogue and consumes all the memory on the slice, suffocating all the other programs running until the whole thing comes to a grinding halt, and I have to do a hard reboot of the slice to get it back up and running again. I can't detect any pattern for this (it seems to happen about once a month, more or less). Here's a screenshot of my console during the last crash: I would assume that a possible cause might a PHP script or an apache configuration rule that might cause the crash if triggered? How would I be able to find out which one is the offending one? I've checked and rechecked all my PHP scripts, and running them doesn't seem to trigger the crash. I've also been able to log on to my system during a crash and see what's running (with top), but I can't tell how the offending process was started, so I can't trace the root of the problem! I know my description is overly generic, but unfortunately my expertise in tracking down the source of these glitches is very limited. If you need any additional information about my system in order to help me figure this out, please let me know in the comments, and I will append it to the question. My only other lead as to the culprit here is Wordpress, which we have installed on this server. Here are the details: Wordpress 3.0.3 with the following plugins installed and activated: Addmarx - Bookmark/Share/Email Dropdown, Akismet, All in One SEO Pack, Animated Banners, Automatically publish highlights of any website, directly to your Blog, Broken Link Checker, CMS Dashboard, Collapsing Categories, Status Updater, SubHeading, Ultimate Google Analytics, VastSubCat, WP-CMS Post Control, and WP Super Cache

  Read the article

• Linux port-based routing using iptables/ip route

  - by user42055

  I have the following setup: 192.168.0.4 192.168.0.6 192.168.0.1 +-----------+ +---------+ +----------+ |WORKSTATION|------| LINUX |------| GATEWAY | +-----------+ +---------+ +----------+ 192.168.150.10 | 192.168.150.9 +---------+ | VPN | +---------+ 192.168.150.1 WORKSTATION has a default route of 192.168.0.6 LINUX has a default route of 192.168.0.1 I am trying to use the gateway as the default route, but route port 80 traffic via the VPN. Based on what I read at http://www.linuxhorizon.ro/iproute2.html I have tried this: echo "1 VPN" >> /etc/iproute2/rt_tables sysctl net.ipv4.conf.eth0.rp_filter = 0 sysctl net.ipv4.conf.tun0.rp_filter = 0 sysctl net.ipv4.conf.all.rp_filter = 0 iptables -A PREROUTING -t mangle -i eth0 -p tcp --dport 80 -j MARK --set-mark 0x1 ip route add default via 192.168.150.9 dev tun0 table VPN ip rule add from all fwmark 0x1 table VPN When I run "tcpdump -i eth0 port 80" on LINUX, and open a webpage on WORKSTATION, I don't see the traffic go through LINUX at all. When I run a ping from WORKSTATION, I get this back from some packets: 92 bytes from 192.168.0.6: Redirect Host(New addr: 192.168.0.1) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 de91 0 0000 3f 01 4ed3 192.168.0.4 139.134.2.18 Is this why my routing is not working ? Do I need to put GATEWAY and LINUX on different subnets to prevent WORKSTATION being redirected to GATEWAY ? Do I need to use NAT at all, or can I do this with routing alone (which is what I want) ?

  Read the article

• What's the best / easiest way to combine two mailboxes on Exchange 2007?

  - by jmassey

  I've found this and this(2) (sorry, maximum hyperlink limit for new users is 1, apparently), but they both seem targeted toward much more complex cases than what I'm trying to do, and I just want to make sure I'm not missing some better approach. Here's the scenario: 'Alice' has retired. 'Bob' has taken over Alice's position. Bob was already with the organization in a different but related position, and so they already have their own Exchange account with mail, calendars, etc., that they need to keep. I need to get all of Alice's old mail, calendar entries, etc., merged into Bob's existing stuff. Ideally, I don't want to have all of Alice's stuff in a separate 'recovery' folder that Bob would have to switch back and forth between to look at older stuff; I want it all just merged into Bob's current Inbox / Calendar. I'm assuming (read: hoping) that there's a better way to do this than fiddling with permissions and exporting to and then importing from a .pst. Office version is 2007 for everybody that uses Exchange, if that helps. Exchange is version 8.1. What (preferably step-by-step - I'm new to Exchange) is the best way to do this? I can't imagine this is an uncommon scenario, but my google-fu has failed me; there seems to be nothing on this subject that isn't geared towards far more complex scenarios. (2): h t t p://technet.microsoft.com/en-us/library/bb201751%28EXCHG.80%29.aspx

  Read the article

• Borked ubuntu uninstall - need to delete boot partition (i think)

  - by Max Williams

  I just got a new pc laptop with windows 7 and wanted to install Ubuntu on it. Which i did, no problem there, by downloading the installer, burning it to dvd then booting off the dvd and installing. Then, i realised that the new Ubuntu 12.04 uses the Unity desktop, which i immediately disliked, and after some research, began to hate. So, i decided (after a little googling) to install Linux Mint instead. So, thinking i'd better start from scratch, i went to the Windows 7 disk manager and wiped the Ubuntu partition that had been created. Now, when i start up, i get an error from grub, the ubuntu boot manager: error: unknown filesystem grub rescue> _ and a blinking cursor where i can enter commands. I suspect that what i've done is deleted the main ubuntu partition but NOT deleted another partition which is a boot partition, or something like that? Can anyone tell me how i can rescue or unbork this? I'd like to either a) get back to my original windows-only setup OR b) install linux mint off dvd (which i have), into the empty partition, fixing any grub confusion in the process. Any suggestions? Thanks, max BTW please don't answer if you're just going to tell me to stick with 12.04, or install a different distro or something. I definitely want Mint and just want to fix this mess - thanks :)

  Read the article

• How can I automatically synchronize a directory tree on multiple machines?

  - by Blacklight Shining

  I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

  Read the article

• CPU temperatures high on new build after gaming

  - by Reznor

  My friend had a problem with his computer a while back. His games were crashing, even within the menus. He was stumped as to what the problem was, so I posted on here requesting help. He found out the day later, when his computer would start up but wouldn't display anything on the screen. His video card must have came screwed up. So, he got a replacement. Now, there's a new problem. His temperatures, which were acceptable before, are now insanely high. His GPU temperature runs 70-80c, which is understandable considering he's running his games maxed out, but the real problem here is his processor and motherboard temperatures. All four of his cores are running at 88-90c after coming out of a game. His motherboard temperature was also 70c at one point. In terms of cooling, his case should definitely be adequate. He has an Antec Twelve Hundred. He's using stock fans. The cable management in his case is very good; better than average. He's using the stock heatsink with the processor too, but note, it was fine before the replacement, so it isn't like there's some inherent problem. He has checked the case too. Everything's fine! No cables in the way. The heatsink is seated properly. He turned his case fans up to high, as well, but the temperatures are persisting. Could the processor be overheating due to running games maxed out? Any ideas?

  Read the article

• Need to restore emails that Outlook deleted from the mail server

  - by Mugen

  I wanted to use POP mail for my Yahoo mail account. So I went to the Yahoo mail settings and enabled POP feature. I installed Microsoft Outlook 2007 and added the settings for my Yahoo mail account. Then I performed a sync. I successfully received all the emails from Yahoo account into my pc. But when I logged into my Yahoo mail online, to my horror all the mails were deleted. It seems someone in Microsoft for some reason decided to keep the default setting unchecked for "Leave copy of messages on the server". This has been a very old account and I need to have all the mails also present on the mail server so I can access it anytime and future purposes. Is there anyway I can restore these emails on the server again? Any ideas how I can get it back to the way it was? I have been googling this for quite sometime now but I'm not able to find it. Any helpful suggestions are welcome. Thanks.

  Read the article

• How can I install iTunes in such a way that it can't put any "hooks" or helper programs on my computer?

  - by Joshua Carmody

  I'm buying a new iPad, which means I must once again install iTunes. I've not used iTunes in more than 6 months, since I bought a new computer. I don't like iTunes, but I can live with using it to buy/manage media and sync my Apple devices when the program is open. What I would like to do though, is find a way to install iTunes in such a way that it has absolutely no effect on my system when it is closed. iTunes normally installs several helper programs such as iTunesHelper.exe, and the Bonjour service. These programs run in the background when iTunes is closed. You can force-close them, or remove them from your setup files, but iTunes will often put them right back when you run it. I know these programs are mostly harmless, but they have at times caused issues such as iTunes spending system resources trying to catalog media files or drives connected to VPN, or other issues. At best they're just one more small background process eating up a small piece of my CPU time and RAM. How can I run iTunes without letting it get it's "hooks" into my system? One thought I had is that I could create a Windows user account just for iTunes, and deny it admin privileges. Then if I installed iTunes using that account maybe anything it installed wouldn't affect the "main" account on my PC? But I'm not sure if that would work.... Failing that, maybe some kind of virtualization software or sandbox I could install it in? I'm open to any suggestions. My system is an Intel-based PC running Windows 7 Professional 64-bit. Thanks!

  Read the article

• MongoDB on 128mb 32-bit VPS (plus Tornado and Redis)

  - by apito

  i am curious about how mongodb will perform in a limited vps. specifically, i'll deploy this configuration on 32-bit ubuntu 9.04 server with 128Mb memory (UPDATE: now i'm considering 360mb too). nginx and redis three instances of tornado apps (one is for mobile site; limited app, not my primary audience); has around 8 Collections. social webapp for my community. mongodb all beside mongodb seems to have small footprint. memory-mapping-wise, i dont know how mongodb will behave. i know it's a little bit a stretch to use this kind of config on a tiny vps, but that's what i can afford for now. i expect to have.. hmm.. maybe ~50 15rps. i did my homework doing a lot of frontend optimizations and yslow says grade A 91 (ruleset V2) :-) anyone willing to share experiences? eg. how big the data set size when mongo hit the ceiling, performance when mongo do a lot of disk IO, etc. thanks. UPDATE: this is my pet project. i'll get back to you when i have next spare time to do same httperf in a vbox with exact spec. suggestion how to do stress testing welcomed. i'm new to this kind of stuff.

  Read the article

• vSphere - datastore falling off a host

  - by Chadddada

  Recently we have been running the vCheck powershell script daily in order to help in monitoring our vSphere ESX 4.0 environment. One of the oddities that we have been seeing is that some of the datastores on the SAN don't always show up on every host. Our hosts are connected redundantly, via FC, to some brocade FC switches, which then connect via fiber to our EMC Ax4 SAN. While all the datastores are presented to each host we have, and they see them initially, they sometimes seem to fall off and are no longer visible. It easy enough to rescan for datastores and add them back to the hosts the hosts but this seems to be an error. Has anyone else seen this or know why it may be happening? Responses to questions: 1. Is it always the same ESX servers that lose their connection? – Scott Warren No this happens randomly on random hosts. If a VM is running on a particular host, of which the VM's disks are on a SAN datastore, then that datastore won't disappear. It seems to happen if a host doesn't touch a datastore for a bit and it just forgets about it.

  Read the article

• Upgrade SQLServer 2008 hardware

  - by John

  Forgive me if I'm not able to be totally clear here. It is not intentional, I'm a senior level developer in a very small company having to act like a manager at the moment. Anyway, the story is that we have 2 older dell servers with SQL Server 2008 Standard in a "cluster". I put that in quotes because I'm still not 100% clear what that means. We have 2 brand new blade servers and want to move the existing databases to the new hardware. Ok, so here is the gotcha. We need to do this with little or no down time. I'm being told that we can evict the passive node, then pull in one of the new servers. But I'm also being told that this is a dangerous step because something could go wrong that would cause the cluster to fail and then we would be left with nothing because the active server would not be able to come back up. Does anyone have any thoughts on how to handle this? I'm being told that the only way to ensure success is to have at least a day of down time where we bring up a new cluster on the new hardware and then migrate the databases 1 by 1.

  Read the article

• Unable to ssh to a Linux VM after a day

  - by jogabonito

  I have a machine running 4 VMs on it. There is one Fedora VM which is causing me some trouble. The IPs of the VMs are something like 10.100.100.* I have a Windows PC which is in the same network. It has an IP 10.100.25.77. When I reboot the Fedora VM, I am able to ping it from my Windows PC as well as use putty to ssh to it. The next day, I cant ping it or ssh from my Windows PC. However I can ping and ssh to the other VMs on the machine. If I ssh to one of the other VMs, I can ping and ssh to the Fedora VM. Next if I restart it, things get back to normal and I can access it without any issues. The IP of the VM doesn't change after rebooting and it is statically assigned I would like to know what is causing this and how to get it fixed. As a last resort, I am thinking of running a cron job to restart the VM every night, it is not a critical server, but will be generally used occasionally in the day time.

  Read the article

• Flash Backed Write Cache (FBWC) without capacitor pack

  - by Martyn

  I brought a HP Smart Array P410 controller and it is installed and working fine in a HP Prolient Microserver with 4 drives in two RAID 1 arrays. I didn’t realise however that it came without any cache so would only work by directly writing straight to the disk, and the performance was horrible. So I then brought the 512MB Flash Backed Write Cache (FBWC) memory module as I was under the impression that with FBWC I would not need a battery. I got this idea from a forum post. "What do you guys think of the choice between 'BBWC' (battery backed write cache) and 'FBWC' (flash backed write cache)? The flashed based ones use non-volitile memory so need no battery." After installing the cache module however the server pretty much won’t boot. The P410 has a flashing amber light on it, and from the manual that doesn’t sound good. I’ve managed to get to the on board BIOS once and even managed to get to boot to the HP Array Configuration Utility (ACU) CD once, but every other time the Server continuingly reboots once it get to the POST screen and reads ARRAY INITILIZING %%%. The one time I reached the ACU, it reported a problem with the Cache Module. To me, it seems like the cache module is faulty, however the supplier tells me “Do you have an FBWC battery pack, p/n 587324-001, because that is required for the cache to work. If you have it, please complete an RMA form and we'll send a replacement / credit.” Does this sound right to you? I’ve been ordering the parts from the US and I don’t want to spend $77 + $40 p&p on a battery, wait a week for the shipping to find the card is faulty, and I don’t want to send back a working card?

  Read the article

• Mac updated just now, postgres now broken

  - by user52224

  I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

  Read the article

• HP tx2510us shuts down without warning, now won't boot, no BIOS codes, screen doesn't light

  - by Tim S

  Hey all, HP tx2150us worked great for a year and a half, rarely it would shut down instead of sleeping. It started running hot sometimes, I installed Win7, worked great, still running hot. Before Xmas, it gave me evidence of video errors - jagged lines, rows missing. That same night, it started rebooting, then it shut off and wouldn't boot. It gave me a BIOS code, I shut it off to look up the code online. When I turned it on again, it won't boot at all. The LEDs all light up, the fan, HD, and optical all spin up, but the screen never lights up and it doesn't try to boot, nor does it blink any BIOS codes. It just acts like it's sleeping, and won't wake up. I suspected heat problems, so I disassembled it, cleaned the crap out of the fan, and reassembled it, breaking the stereo mic connector. Oh well. When I reassembled it, it booted up into Win7 again, but kept shutting down for no discernible reason. After a dozen or so random reboots like that, it is now back to where it was - turns on but doesn't boot or give BIOS codes. The screen never lights, and everything spins up then idles. Any ideas? I really can't afford to buy a new one and I use(d) it to take ALL my notes, that's why I got a tablet in the first place.

  Read the article

• how to diagnose a hard system seizure? Dell+Ubuntu

  - by rob

  I've got Ubuntu 9.10 on a Dell Vostro 420 desktop, a little over a year old, which I use for plain vanilla work stuff (email, web, terminal, text editor). Every now and then, at totally random times, it completely freezes on me. Hard. Mouse and keyboard stop working, cursor stops blinking, clock stops moving. All I can do is hold down the power button on the front of the box to shut it off. Sometimes it happens after several months of continuous uptime; sometimes it happens a few minutes after a reboot, while all I've done is open a terminal to look at log files, or maybe firefox to do a google search. Each time, there is nothing at all in /var/log/messages at the time of the crash. This makes it seem like a hardware problem, and indeed a few months ago I opened the box and wiggled everything and the problem went away for a while. But now it's back. I went in and checked everything, took out each RAM card and reseated. No luck. I ran all the system diagnostics (the long version) and everything passed with flying colors. Something is messed up in this box, but without any useful logs or failed tests, how in the world am I going to find it? And of course, Dell's not gonna help me cause I went and replaced Windows with Ubuntu. What steps would you take next to track down this problem?

  Read the article

• Anonymous Login attemps from IPs all over Asia, how do I stop them from being able to do this?

  - by Ryan

  We had a successful hack attempt from Russia and one of our servers was used as a staging ground for further attacks, actually somehow they managed to get access to a Windows account called 'services'. I took that server offline as it was our SMTP server and no longer need it (3rd party system in place now). Now some of our other servers are having these ANONYMOUS LOGIN attempts in the Event Viewer that have IP addresses coming from China, Romania, Italy (I guess there's some Europe in there too)... I don't know what these people want but they just keep hitting the server. How can I prevent this? I don't want our servers compromised again, last time our host took our entire hardware node off of the network because it was attacking other systems, causing our services to go down which is really bad. How can I prevent these strange IP addresses from trying to access my servers? They are Windows Server 2003 R2 Enterprise 'containers' (virtual machines) running on a Parallels Virtuozzo HW node, if that makes a difference. I can configure each machine individually as if it were it's own server of course... UPDATE: New login attempts still happening, now these ones are tracing back to Ukraine... WTF.. here is the Event: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB4FEB30C) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: REANIMAT-328817 Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 94.179.189.117 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Here is one from France I found too: Event Type: Success Audit Event Source: Security Event Category: Logon/Logoff Event ID: 540 Date: 1/20/2011 Time: 11:09:50 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: QA Description: Successful Network Logon: User Name: Domain: Logon ID: (0x0,0xB35D8539) Logon Type: 3 Logon Process: NtLmSsp Authentication Package: NTLM Workstation Name: COMPUTER Logon GUID: - Caller User Name: - Caller Domain: - Caller Logon ID: - Caller Process ID: - Transited Services: - Source Network Address: 82.238.39.154 Source Port: 0 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• Help, my CentOS servers keep going down , No route to host after a random uptime

  - by user249071

  Hello , I have a couple of Centos linux servers, that have a very simple task, they run nginx + fastcgi for php , and some NFS mounts between them, readonly They have some RPC commands to start some downloading processes with wget, nothing fancy , from a main server, but their behavior is very unstable, they simply go down, we tried to monitor ram , processor usage, even network connections, they don't load up so much, max network connections up to... 250 max, 15% processor usage and memory , well, doesn't even fill up, 2.5GB from 8GB max , I have no ideea why can a linux server go down like that, they aren't even public servers, no domain names installed no public serving, for sites. The only thing that I've discovered was that if i didn't restart the network service every couple of hours or so... the servers were becoming very slow, starting apps very slow, but not repoting a high usage of resources...Maybe Centos doesn't free the timeout connections, or something like that...It's based on Red Hat right? I'm not a linux expert , but I'm sure that there are a few guys out there that can easily have an answer to this , or even have some leads to what i can do ... I haven't installed snort, or other things to view if we have some DOS attacks, still the scheduled script that restarts the network each hour should put the system back online, and it doesn't.... Thank you in advance

  Read the article

• how to remove background layer of djvu file

  - by Jon

  Hello, I've downloaded some files from the Internet Archive. They come in different file formats and most of the time I use pdf. However, sometimes the scans are saves in colour instead of b/w. This makes it difficult/impossible to read on a dedicated ebook reader. In that case I downloaded the djvu files as on the PC you can select which layer (color, bw,fore,back) one would like to see. Selecting the bw gives excellent results. However, the ebook reader does not has this option. The question is, how can I remove /extract a layer from the djvu file and save only this layer. So far I've tried the following two approaches: 1) select bw in the djvu viewer on the PC and printed to postscript file. Followed by a ps2pdf conversion. This works, but generates a fairly large pdf file. Sure, I can again upload it to any2djvu but it just seems to much manual work for each file. 2) I tried the shared annotation feature and said (mode bw). This works on the PC as desired but is ignored on the ebook reader as the other layers are still present. Any help or suggestions would be greatly appreciated.

  Read the article

• organizing my music and my itunes

  - by Cawas

  What can we do to organize our music? I've got over 20k items on my iTunes Library, at least 5k with ratings and play counts, apparently just 12k music files and I can't understand how this question have not been properly answered yet. Maybe there is no answer. I have too many duplicates, broken links, bad music, corrupted files... Well, a big mess with no tags! Probably there's no single software capable of just organizing everything, though I'd love one. Hopefully some time in the near future we all will be able to just sync the cloud of our automagically selected music to the newly created offline copy. But meanwhile... Please, do consider I've at least gave a shot (even while not a full test drive) to every single answer linked here already, plus a few more. I'm fine with using other software (mac too, please) to organize, but I'd need it to sync (retrieve and put back) at least iTunes ratings, because of iPhone and smart playlists. Not looking for iTunes replacement. I'm hoping to hear what you hardcore music organizers out there are using as your own solutions! :) I myself am using way too many tools, getting way too little done and end up going song by song.

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• Ping with explicit next-hop selection (aka Monitoring multiple default gateways)

  - by Michuelnik

  I have a linux (debian) router with two internet connections (A) and (B). (A) is preferred, (B) is fallback. I want to monitor the internet connection (and not only the availability of the gateways!) and change the default route appropriately. If (A) is not providing internet, switch to (B) If (A) is providing internet again, switch back to (A). Only problem I have is in case (2). My routing table points towards a working internet so I cannot easily detect whether internet is working over link (A) again. I am search for a ping or traceroute (or other diagnosis-tool) which can select the next-hop explicitly. ping -r looks promising, but can only ping a host on the lan. (It only has to write another destination address in the packet, damnit!) traceroute -g gateway looks even more promising and nearly does what I want - but sets source routing options which my next-hops deny. (Not within my administrative boundary...) I just want a $ping, that can: select a source interface (and address) select a next-hop on that interface ping any arbitrary ip address I could do evil trickery with policy-based routing but that would have production impact for all users. I would like to see a side-effect-free solution....

  Read the article

• How does Firefox sync really work (when adding new devices)?

  - by tim11g

  I'm adding some less frequently used computers to my Firefox sync account. These computers were previously synced using Foxmarks BYOS. When I started using Firefox Sync, I deleted some old bookmarks. Later, as I added some other machines, old bookmarks (that still existed on the other machines) were synced back to my main machine. To prevent that from happening, I wonder if I perhaps need to delete all the bookmarks from new machines before adding them to the Sync account. But then I worry that it might sync the deletion of all the bookmarks and delete them all from the server and my other machines. Is there any documentation on the exact syncing behavior in the case of adding new devices? Is there any way to monitor progress and sync status? Is there any way to cause a "one way" sync for first time connection (sync server to browser only, overwriting everything in the browser? Is there any way to see a list of devices that are associated, and the last time they have synced? Thanks!

  Read the article

• Nvidia GTX 660m crashes games

  - by dcap

  I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

  Read the article

< Previous Page | 812 813 814 815 816 817 818 819 820 821 822 823  | Next Page >