Search Results

Search found 3880 results on 156 pages for 'extended ascii'.

Page 82/156 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

  • Windows 7 with two network cards doesn't route traffic

    - by Tomek
    I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

    Read the article

  • View scheduled recordings remotely

    - by Scott
    I have one computer which is equipped with a TV tuner card. The Recorded TV folder is shared so that other computers on the network can watch recordings. Now that I am upgrading my computers to Windows 7, they have Media Center, which makes for a nicer viewing experience than a Windows Explorer folder view. I have set up Media Center on my laptop to considering the Recorded TV folder on the tuner-equipped PC as an extended library location, so now I can view all the recordings from within Media Center on the laptop. To make this experience even better, is there a way to view the list of scheduled recordings on the tuner-equipped PC from within Media Center on my laptop?

    Read the article

  • Photoshop How to save selection to PNG

    - by Aniti
    I have a largish PSD file with a couple of hundred layers, that I would like to extract selected areas from into PNG files. Areas can consist of a couple of layers. Being new to Photoshop, I have been using the following workaround. Duplicate needed layers into a new scratch PSD file of same size, TRIM to transparency, Save As PNG, undo TRIM, hide layers, rinse and repeat... I suppose I could do it without the scratch file and just crop selection, Save As PNG and undo, but there must be a nicer method. What other ways are there to accomplish this export of a selected area to PNG? EDIT: This is on Windows Xp running Photoshop CS3 Extended

    Read the article

  • How to suppress the unsolicited footer when converting HTML -> PDF with Acrobat?

    - by gojira
    I often convert & combine (via contextmenu) HTML pages to PDF using Acrobat (not Acrobat Reader). I use Adobe Acrobat Pro 9 Extended, version 9.1.2. The converted PDFs always have the full path of the original file on the bottom of the PDF-page, also they have an additional header line with the document. I need to suppress that. I do not want the unsolicited header and footer in the resulting PDF files as they are a pain to reomve manually, with a certain page count per document it becomes impossible. Is it possible to suppres that and if, how?

    Read the article

  • Make iMovie text overlay remain on screen after in-transition

    - by Kit
    My idea of a text overlay has the following timeline: In-transition Static display Out-transition For this project, I am particularly fond of iMovie's Organic Main text overlay. I want it to display for an extended period. The problem is, when I set its display time for 3:20 (minutes:seconds), it performs its transition over the whole period. The text would won't be fully seen until the next 3 minutes. This is what I want: In-transition for 1 second Static display for 3:18 minutes Out-transition for 1 second Is that possible with iMovie?

    Read the article

  • Improve efficiency when using parallel to read from compressed stream

    - by Yoga
    Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

    Read the article

  • Use only external monitor at screen's native resolution

    - by joaoc
    My laptop's screen lamp just died (I can see content on the screen if I point a light at it) and I was using it with an external monitor. I can switch from extended desktop to mirrored mode but, and here is where I need help, the resolutions don't match. The laptop's resolution is 1600x1200 and the external monitor is 1680x1050. I am ok with just using one screen ATM but I would like for it to at least use the native resolution of the external monitor. This is Windows XP and under Monitor settings I only get the resolutions for the original monitor under mirrored mode. How can I force the screen into a resolution not supported by the laptop screen but that is a native resolution for the external monitor?

    Read the article

  • Volume expanded in Volume Group, old disk reduced but still in use in system

    - by Yurij73
    Tryed to add a new hard sdb (not formated) to my virtualbox Centos. Successfully extended an existing vg_localhost to /dev/sdb/ # lvdisplay --- Logical volume --- LV Path /dev/vg_localhost/lv_root LV Name lv_root VG Name vg_localhost LV UUID DkYX7D-DMud-vLaI-tfnz-xIJJ-VzHz-bRp3tO LV Write Access read/write LV Creation host, time localhost.centos, 2012-12-17 LV Status available # open 1 LV Size 18,03 GiB Current LE 4615 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdb 8:16 0 20G 0 disk +-vg_localhost-lv_root (dm-0) 253:0 0 18G 0 lvm / +-vg_localhost-lv_swap (dm-1) 253:1 0 2G 0 lvm [SWAP] sda 8:0 0 9G 0 disk +-sda1 8:1 0 500M 0 part /boot +-sda2 8:2 0 8,5G 0 part sr0 11:0 1 1024M 0 rom df -h /dev/mapper/vg_localhost-lv_root 6,5G 6,2G 256M 97% / tmpfs 499M 200K 499M 1% /dev/shm /dev/sda1 485M 78M 382M 17% /boot it still old sda in use, what i have to do further?

    Read the article

  • Mongo Client RedHat EL5 UT8 Support

    - by Michael Irey
    # mongo MongoDB shell version: 1.6.4 Fri Mar 16 11:55:46 *** warning: spider monkey build without utf8 support. consider rebuilding with utf8 support connecting to: test Mongo Server seems to handle the utf8 characters fine, as well as my php-mongo-client driver. But when I try to query a record that has a utf8 character from the mongo command line client I get: > db.Users.find({age:33}); error:non ascii character detected Fri Mar 16 11:55:43 mongo got signal 11 (Segmentation fault), stack trace: Fri Mar 16 11:55:43 0x440b50 0x3664c302d0 0x3f47e7b6e0 0x3f47e83bbd 0x3f47e254f3 0x3f47e25660 0x3f47e256ee 0x3f47e25792 0x3f47e2876e 0x4b031d 0x443b72 0x445476 0x3664c1d994 0x43fd39 mongo(_Z12quitAbruptlyi+0x3b0) [0x440b50] /lib64/libc.so.6 [0x3664c302d0] /usr/lib64/libjs.so.1 [0x3f47e7b6e0] /usr/lib64/libjs.so.1(js_CompileTokenStream+0x3d) [0x3f47e83bbd] /usr/lib64/libjs.so.1 [0x3f47e254f3] /usr/lib64/libjs.so.1(JS_CompileUCScriptForPrincipals+0x60) [0x3f47e25660] /usr/lib64/libjs.so.1(JS_EvaluateUCScriptForPrincipals+0x3e) [0x3f47e256ee] /usr/lib64/libjs.so.1(JS_EvaluateUCScript+0x22) [0x3f47e25792] /usr/lib64/libjs.so.1(JS_EvaluateScript+0x6e) [0x3f47e2876e] mongo(_ZN5mongo7SMScope4execERKSsS2_bbbi+0xed) [0x4b031d] mongo(_Z5_mainiPPc+0x14a2) [0x443b72] mongo(main+0x26) [0x445476] /lib64/libc.so.6(__libc_start_main+0xf4) [0x3664c1d994] mongo(__gxx_personality_v0+0x269) [0x43fd39] Any ideas or suggestions would be welcome

    Read the article

  • How to move mail among Google Apps for Domains users

    - by Paul Roub
    Considering moving the domain used by my extended family for email to Google Apps. One less server for me to manage, better spam filtering, etc. One thing that's been nice about running my own has been the way I manage my kids' incoming email - it comes to me first, and I drop good mail in a symlinked IMAP folder that we share. A little procmail is all it takes, and straight-through exceptions are easy to implement. (FYI, no I'm not advocating censorship, but manually filtering spam and viruses from my 8-year-old's inbox seems like the right thing to do. YMMV) Anyway. I'm wondering if there's an easy way to do something similar in Google Apps - setting up filters to auto-redirect to me looks easy enough (any gotchas there?), but moving things back is not obvious. Yes, I could access both accounts via IMAP and drag mails across, but does anyone have an easier way?

    Read the article

  • How to use cursor keys to switch buffers in GNU screen

    - by suvayu
    I want to use cursor keys or cursor keys with a modifier like Ctrl to switch between screen buffers (e.g. C-a [arrow] or C-a C-[arrow]). So far I have tried settings like the ones below with no success. bind \224\115 prev bind \224\116 next bindkey -d ^[[1;5D prev bindkey -d ^[[1;5C next They are either ignored or behave unexpectedly (the second one). I am also not sure how to specify the keys. To get the characters, I either used C-v to quote them in bash, or tried to look-up on the Internet (e.g. http://ascii-table.com/ansi-escape-sequences.php). Any idea how I can achieve this key binding?

    Read the article

  • Gentoo+urxvt+terminus: How do I change font version?

    - by gaidal
    In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

    Read the article

  • What are 'damaged files' on external hard drive (HFS format for OS X)?

    - by dtlussier
    I have an external HD formatted to default HFS (Mac OS Extended - Journaled) and very once and a while I get a folder called DamagedFiles in the root of the volume. The folder contains a collection of links to files on the drive. In general the files seem fine as I am for example able to open the images or text files without a problem. Is this serious? What can I do to fix this problem? Any advice would be great as I couldn't find anything on here or via Google that addressed this problem in particular. Many thanks.

    Read the article

  • Macbook Air Reboot after Wake when Windows 7 Running in VM

    - by rfastturnlow
    Is anyone who is running a Windows 7 VM on a new 2011 i5 Macbook Air (I have the 13" w/128 SSD) able to put their Macbook air to sleep for extended periods of time (like overnight) without manually shutting down or suspending a VM that's running in Parallels, VMware Fusion or VirtualBox? I've tried all three virtualization products with no success. With all three, if I forget to manually shutdown or suspend the VM, OSX reboots when I try and wake the Macbook. Same goes if I try and use the Deep Sleep widget. Parallels support openly admitted that this was an issue and thankfully gave me a refund. I've also tried the trial version of VMware and VirtualBox, but the behavior is the same. Should I just give up or is anyone out there having more success at this?

    Read the article

  • Gentoo+urxvt+terminus: How do I change font version?

    - by gaidal
    In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread: Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.

    Read the article

  • Installing Helvetica on Windows

    - by Marek D
    I've installed Helvetica Neue fonts on my Windows. The problem is when websites use Helvetica or Helvetica Neue typeface, they almost exclusively do it simply using "Helvetica" or "Helvetica Neue" font-family. But In my windows, the Helvetica fonts are installed as a "HelveticaNeueLT Com 45 Lt" or "Helvetica LT Std" or similar extended name. I've tried to create my test page, and the browser renders the font properly only if I use the full font name. I'd like to know, how to make windows/browser display Helvetica properly?

    Read the article

  • Partition and mount my secondary hard drive on CentOS 5.5 64bit?

    - by Andrew Fashion
    I am trying to prepare my second hard drive for user image uploads. Here is the current layout: # sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. I am assuming #4 is my secondary drive? How do I partition and mount it so I can begin using it? And how do I add to fstab? I understand if it's to many questions in one, just help me with whatever you can I guess :) Thank you for any help!

    Read the article

  • How to make vim display unicode

    - by Yitzchak
    I am trying to work with a utf-8 encoded xml file in vim 7.3 running on ubuntu. ASCII characters display normally but vim gives me gibberish instead of the unicode characters. After trying the following, I've reached the limits of my knowledge: 1) Checked that unicode was enabled by running set termencoding?. Output was termencoding=utf-8. 2) I installed the script from here (vim.org/scripts) 3) moved my ~/.vimrc file into ~/.vim 4) moved it back into ~ 5) followed the instructions in the accepted answer to this question. Is there some other variable I'm supposed to set? I know my system has the fonts I need. Update: Issue seems to be limited to html files for some reason.

    Read the article

  • Windows 7 treating my third monitor as an extension to my second rather than detecting it as a stand alone

    - by user331837
    I am trying to attach a third monitor to my PC, however I am coming across a rather strange issue. Windows screen resolution is still only showing that I have two monitors connected, but the second has been extended over both the second and third monitors. Basically, it shows as the main display being a normal size, and the secondary as being twice as long as normal. I have my main connected via a the display port, and the second and third are using two of the three mini HDMI ports my video card provides. How do I get windows to accept my third monitor the same as it does my second?

    Read the article

  • Windows 8.1 triple monitors - can't enable all 3 at the same time

    - by Jeckerson
    Today decided to update from Win8 Pro to Win8.1. Everything was fine with enabled 3 monitors (Extended mode, not Eyefinity) at the same time. But after update can't enable 3d monitor, only 2 could be enabled at the same time. Did current things before write question here: Remove all drivers, reboots, re-installs Different cable input's and orders of enabling Tried to enable each monitor from Catalyst and Windows Screen Resolution Spec's: Windows 8.1 Pro XFX HD7970 3 of LG E2442 Cables: 2 DVI 1 HDMI Googled for many time and found one of possible solution is to buy ACTIVE mini DisplayPort to DVI/HDMI, but maybe there are some another more simple solutions?

    Read the article

  • Scroll bar for vim(curses-based one, not gvim)?

    - by xiaq
    As a Linux user, I have been quite comfortable with CLI and TUI tools, but I miss the little scrollbar present in almost every GUI program. It has always been easier for me to know how long the file is and where I am from the scrollbar instead of "9752 lines, 24%". What I expect is a ASCII scrollbar that looks like | | | | # # # | | | and I can configure to appear on the left or right (and if on the left, the relative position to line numbers and fold marks). Is there already a Vim plugin to do this, or how can I write my own one? Vim's plugin framework doesn't seem to support such UI modifications directly.

    Read the article

  • Make user uploads go to different hard drive?

    - by Andrew Fashion
    I am using a pre-made social networking script where all user uploads go to site.com/public/user/ How can I make /public/user/ my secondary hard drive so all user uploads are uploaded to my second harddrive and not the primary hard drive. I have over 100GB of images, and I want them on my other HDD now. Thank you. I am running CentOS 5.5 64bit w/ Apache and PHP I have two 250GB Sata HDDs sudo parted /dev/sda print Model: ATA WDC WD2500KS-00M (scsi) Disk /dev/sda: 250GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 107MB 107MB primary ext3 boot 2 107MB 8595MB 8488MB primary linux-swap 3 8595MB 10.7GB 2147MB primary ext3 4 10.7GB 250GB 239GB extended 5 10.7GB 250GB 239GB logical ext3 Information: Don't forget to update /etc/fstab, if necessary. 5 10.7GB 250GB 239GB logical ext3

    Read the article

  • Run 2008 R2 Service under 2000 Domain Account

    - by NoDisassemble
    I'm trying to get a service to run under a domain account. When I try to add the account, I get the error The account name is invalid or does not exist, or the password is invalid for the account name specified I know the account exists and the password is correct. I am also having trouble adding it manually to the "Log on as a service" setting, I get the error An extended error has occured. Failed to save Local Policy Database After a day of research I'm starting to suspect it has to do with it being a 2008 R2 server trying to use a 2000 domain account. I've tried to change the LAN Manager authentication level and the Minimum session security looks okay per my Google digging. I'm not sure what else I can do?

    Read the article

  • How to know when the Client is disconnected from Server in C#?

    - by menacheb
    Hi, I have a Client-Server program in C#. Here is the Server's code: ... String dataFromClient = ""; NetworkStream networkStream; TcpClient clientSocket; bool transfer = true; ... while (transfer) { networkStream = clientSocket.GetStream(); networkStream.Read(bytesFrom, 0, (int)clientSocket.ReceiveBufferSize); dataFromClient = System.Text.Encoding.ASCII.GetString(bytesFrom); dataFromClient = dataFromClient.Substring(0, dataFromClient.IndexOf("$")); .... } I want to make a condition that stop the loop when the Client is disconnected. How can I do that? Many thanks,

    Read the article

  • How to convert OpenVZ OS templte to bootable to image file?

    - by Medi
    My question is how to convert a pre-created OpenVZ OS template which are in tar.gz format (such as these) to an image file in order to be able boot it with other virtualization solutions such as QEMU or VirtualBox. In order to achieve this, I made an empty image file, I partitioned it, and made two partition, a primary partition and a extended partition for swap. I made the first partition ext3 (0x83) and the other one swap (0x82). Then I made the first one bootable, and copied the content of tar.gz to the first partition. But when I try to boot, it hangs at the first stage of booting.

    Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >