Search Results

Search found 24334 results on 974 pages for 'directory loop'.

Page 821/974 | < Previous Page | 817 818 819 820 821 822 823 824 825 826 827 828  | Next Page >

• ALSA samples capture: cannot open device

  - by Randagio

  I'm quite new to Linux (Lubuntu 12.04 for sake of precision) and ALSA programming at all. I'm trying to write a C program to capture audio from internal PC microphone for processing it. So as first step I google a bit and I found this article for capturing audio samples A tutorial on using the ALSA Audio API but when I compile it and execute it with: ./capture "default" or ./capture "hw:0,0" and all the possible variants on theme it always raises the error: cannot open device hw:0,0 (no such file or directory). So the issue is: what is the name of the mic audio device to pass as parameter to record the audio from mic ? The mic is working ok because the Sound Recorder program records sounds perfectly and I can playback them. The output of the aplay -l is the following : **** List of PLAYBACK Hardware Devices **** card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 4: Intel ICH - IEC958 [Intel 82801DB-ICH4 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 and this is the amixer output (cut) Simple mixer control 'Master',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 4 [13%] [-40.50dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [12.00dB] [on] Front Right: Playback 31 [100%] [12.00dB] [on] Simple mixer control 'CD',0 Capabilities: pvolume pswitch cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 22 [71%] [-1.50dB] [on] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Stereo Mic',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] so for aplay it seems I have no recording device, but for amixer I've got the mic, a mic boost and mic stereo as well with all those gorgeous stuffs on their place !!. If so, how could my Sound Recorder record the audio without any problem at all ?!?! For sure I'm giving the wrong device name to the command line for capturing audio but I'm loosing the hope for finding the correct one ! Please help....before I tear my hair out !!!

  Read the article

• Canonicalization issue regarding academic URL vs. blog URL

  - by user5395

  I'm sorry if what I am about to write is long-winded. I only wish to be clear. I am an academic in the scientific community. I maintain a web site for my research, teaching, and other professional activities. Until recently, the content for this site was hosted in a directory on my university department's own server. The address is of the typical form (universityname).edu/~(myusername) I decided that I wanted to use WordPress in order to host and manage my page. So I set up a WordPress.com blog and then replaced the index.html file in (universityname).edu/~(myusername) with a new one consisting of a single frame, containing the WordPress.com blog. Now when a user visits (universityname).edu/~(myusername), he or she sees the blog instead. This has been pretty nice because, even when the user clicks on links between pages or posts in the blog, the only thing showing up in the address bar of the browser is www.(universityname).edu/~(myusername), because the blog is constrained to a frame. However, the effect of this change on the search side of things has not been so kind to me. Before, when someone searched for my name in Google, the first result was always (universityname).edu/~(myusername). This is the most desirable outcome, for professional reasons. (Having my academic URL come up first suggests that I am an accredited professional, and not just some crank with a blog!) But now, Google seems to have canonicalized my web presence under the blog's WordPress.com address. It has completely forgotten about my academic URL and considers the WordPress.com address to be the best address representing me on the web. Unfortunately, WordPress.com doesn't support the canonical tag, so I can't tell the blog to advertise itself as my academic URL in the header. (It doesn't seem to help at all that I have used the WordPress.com dashboard to turn on no-indexing of the blog.) One obvious solution would be to use the departmental server to host my content again, and use a local installation of the WordPress platform. For reasons beyond my control, the platform will not be deployed on the departmental server at this time. Another solution would be to use shared hosting with WordPress.org support, because the WordPress.org platform does support the canonical tag (albeit via a plug-in). But this seems to usually require purchasing a domain name and other fees, and there is no guarantee that Google will listen to the canonical tag (it might use whatever domain name I end up with instead). Is there a way I can more cleverly integrate the WordPress.com blog into a page hosted on my department's server? Is there some PHP code I can write to retrieve the blog's contents in a way that Google won't treat as a link / "perceive" the blog? Please note: I am a PHP novice at best. I just feel there should be a simpler solution to all this, within the constraints of what I have described above. Thanks!

  Read the article

• Why I Love Microsoft Development

  - by Brian Lanham

  I've been writing software for a while and recently had an opportunity to broaden my horizons and start developing for iOS. We decided to leverage, as much as possible, our existing skills and use MonoTouch and MonoDevelop by Novell.    For those of you who do not know, Mono is a .NET port originally designed for Linux but adapted for other platforms as well. MonoTouch is a port specifically for building iOS applications using the .NET framework. MonoDroid is a port (in CTP-esque release) for Android.   A MISSING COMPONENT - VISUAL DESIGNER   MonoDevelop lacks one very significant component compared with other tools I am using: NO VISUAL DESIGNER. Instead of using an integrated visual designer, MonoDevelop shells to the Mac OS "Interface Builder".  Since MonoDevelop lets me have a "Visual Studio-esque" feel *and* I get to use C#, AND it's FREE, I am gladly willing to overlook this.  In fact, it's not even a question.  Free?  Sure, I'll take it with no Visual Designer.   In my experiences I've grown from UNIX and DOS to .NET development through many steps. Java/JSP/Servlets; Windows; Web; etc. I've been doing .NET for quite a few years and I guess I just got "comfortable" with the tools.   WHY AM I NOT GETTING IT?   Interface Builder (IB) is amazingly confusing for me. I had the opportunity to speak at the Northern VA Code Camp on 12/11/2010. My presentation was "Getting Started with iOS Development using MonoTouch and C#".    At the visual design part of the presentation, I asked one of the 3 or 4 Mac developers in the room about my confusion with the IB. I don't understand why the "Classes" list includes objects. I don't understand what "File's Owner" is. And, most importantly, WHAT THE HECK IS AN OUTLET AND WHY IS IT NECESSARY?!?!?"   His response to these question (especially Outlets): "They did it wrong."   I'm accustom to a visual designer that creates variables for graphical widgets for me. Not IB. Instead, I have to create "Outlets" manually. I still do not understand why and, the explanation from a seasoned Mac developer is that it's wrong. (He received nods of confirmation from the other Mac devs in the room.)   I LOVE MS DEV   I love development for Microsoft platforms using Microsoft development tools. I love Windows 7. I love Visual Studio 2010. I love SQL Server. Azure, Entity Framework, Active Directory, Office, WCF/WF/WPF, etc. are all designed with integration in mind. They are also all designed with developers in mind.   Steve Ballmer recently ranted "It's the developers!" That's why it is relatively quick to build apps using MS tools. Clearly, MS knows that while we usually enjoy building technology solutions, we are here to make money. And we need tools that accelerate our time to market without compromising the power and quality of our solutions.   So, yeah, I am sucking up I guess. But I love Microsoft Development. Thank you, Microsoft, for providing the plethora of great development tools.    P.S. (but please slow down a bit…I'm having trouble keeping up!)

  Read the article

• Flow-Design Cheat Sheet &ndash; Part II, Translation

  - by Ralf Westphal

  In my previous post I summarized the notation for Flow-Design (FD) diagrams. Now is the time to show you how to translate those diagrams into code. Hopefully you feel how different this is from UML. UML leaves you alone with your sequence diagram or component diagram or activity diagram. They leave it to you how to translate your elaborate design into code. Or maybe UML thinks it´s so easy no further explanations are needed? I don´t know. I just know that, as soon as people stop designing with UML and start coding, things end up to be very different from the design. And that´s bad. That degrades graphical designs to just time waste on paper (or some designer). I even believe that´s the reason why most programmers view textual source code as the only and single source of truth. Design and code usually do not match. FD is trying to change that. It wants to make true design a first class method in every developers toolchest. For that the first prerequisite is to be able to easily translate any design into code. Mechanically, without thinking. Even a compiler could do it :-) (More of that in some other article.) Translating to Methods The first translation I want to show you is for small designs. When you start using FD you should translate your diagrams like this. Functional units become methods. That´s it. An input-pin becomes a method parameter, an output-pin becomes a return value: The above is a part. But a board can be translated likewise and calls the nested FUs in order: In any case be sure to keep the board method clear of any and all business logic. It should not contain any control structures like if, switch, or a loop. Boards do just one thing: calling nested functional units in proper sequence. What about multiple input-pins? Try to avoid them. Replace them with a join returning a tuple: What about multiple output-pins? Try to avoid them. Or return a tuple. Or use out-parameters: But as I said, this simple translation is for simple designs only. Splits and joins are easily done with method translation: All pretty straightforward, isn´t it. But what about wires, named pins, entry points, explicit dependencies? I suggest you don´t use this kind of translation when your designs need these features. Translating to methods is for small scale designs like you might do once you´re working on the implementation of a part of a larger design. Or maybe for a code kata you´re doing in your local coding dojo. Instead of doing TDD try doing FD and translate your design into methods. You´ll see that way it´s much easier to work collaboratively on designs, remember them more easily, keep them clean, and lessen the need for refactoring. Translating to Events [coming soon]

  Read the article

• LibGdx drawing weird behaviour

  - by Ryckes

  I am finding strange behaviour while rendering TextureRegions in my game, only when pausing it. I am making a game for Android, in Java with LibGdx. When I comment out the line "drawLevelPaused()" everything seems to work fine, both running and paused. When it's not commented, everything works fine until I pause the screen, then it draws those two rectangles, but maybe ships are not shown, and if I comment out drawShips() and drawTarget() (just trying) maybe one of the planets disappears, or if I change the order, other things disappear and those that disappeared before now are rendered again. I can't find the way to fix this behaviour I beg your help, and I hope it's my mistake and not a LibGdx issue. I use OpenGL ES 2.0, stated in AndroidManifest.xml, if it is of any help. Thank you in advance. My Screen render method(game loop) is as follows: @Override public void render(float delta) { Gdx.gl.glClearColor(0.1f, 0.1f, 0.1f, 1); Gdx.gl.glClear(GL10.GL_COLOR_BUFFER_BIT); controller.update(delta); renderer.render(); } When world state is PAUSED controller.update does nothing at all, there is a switch in it. And renderer.render() is as follows: public void render() { int worldState=this.world.getWorldState(); updateCamera(); spriteBatch.begin(); drawPlanets(); drawTarget(); drawShips(); if(worldState==World.PAUSED) { drawLevelPaused(); } else if(worldState==World.LEVEL_WON) { drawLevelWin(); } spriteBatch.end(); } And those methods are: private void updateCamera() { this.offset=world.getCameraOffset(); } private void drawPlanets() { for(Planet planet : this.world.getPlanets()) { this.spriteBatch.draw(this.textures.getTexture(planet.getTexture()), (planet.getPosition().x - this.offset[0]) * ppuX, (planet.getPosition().y - this.offset[1]) * ppuY); } } private void drawTarget() { Target target=this.world.getTarget(); this.spriteBatch.draw(this.textures.getTexture(target.getTexture()), (target.getPosition().x - this.offset[0]) * ppuX, (target.getPosition().y - this.offset[1]) * ppuY); } private void drawShips() { for(Ship ship : this.world.getShips()) { this.spriteBatch.draw(this.textures.getTexture(ship.getTexture()), (ship.getPosition().x - this.offset[0]) * ppuX, (ship.getPosition().y - this.offset[1]) * ppuY, ship.getBounds().width*ppuX/2, ship.getBounds().height*ppuY/2, ship.getBounds().width*ppuX, ship.getBounds().height*ppuY, 1.0f, 1.0f, ship.getAngle()-90.0f); } if(this.world.getStillShipVisibility()) { Ship ship=this.world.getStillShip(); Arrow arrow=this.world.getArrow(); this.spriteBatch.draw(this.textures.getTexture(ship.getTexture()), (ship.getPosition().x - this.offset[0]) * ppuX, (ship.getPosition().y - this.offset[1]) * ppuY, ship.getBounds().width*ppuX/2, ship.getBounds().height*ppuY/2, ship.getBounds().width*ppuX, ship.getBounds().height*ppuY, 1f, 1f, ship.getAngle() - 90f); this.spriteBatch.draw(this.textures.getTexture(arrow.getTexture()), (ship.getCenter().x - this.offset[0] - arrow.getBounds().width/2) * ppuX, (ship.getCenter().y - this.offset[1]) * ppuY, arrow.getBounds().width*ppuX/2, 0, arrow.getBounds().width*ppuX, arrow.getBounds().height*ppuY, 1f, arrow.getRate(), ship.getAngle() - 90f); } } private void drawLevelPaused() { this.shapeRenderer.begin(ShapeType.FilledRectangle); this.shapeRenderer.setColor(0f, 0f, 0f, 0.8f); this.shapeRenderer.filledRect(0, 0, this.width/this.ppuX, PAUSE_MARGIN_HEIGHT/this.ppuY); this.shapeRenderer.filledRect(0, (this.height-PAUSE_MARGIN_HEIGHT)/this.ppuY, this.width/this.ppuX, PAUSE_MARGIN_HEIGHT/this.ppuY); this.shapeRenderer.end(); for(Button button : this.world.getPauseButtons()) { this.spriteBatch.draw(this.textures.getTexture(button.getTexture()), (button.getPosition().x - this.offset[0]) * this.ppuX, (button.getPosition().y - this.offset[1]) * this.ppuY); } }

  Read the article

• Oracle MDM Maturity Model

  - by David Butler

  A few weeks ago, I discussed the results of a survey conducted by Oracle’s Insight team. The survey was based on the data management maturity model that the Oracle Insight team has developed over the years as they analyzed customer IT organizations to help them get more out of everything they already have. I thought you might like to learn more about the maturity model itself. It can help you figure out where you stand when it comes to getting your organizations data management act together. The model covers maturity levels around five key areas: Profiling data sources; Defining a data strategy; Defining a data consolidation plan; Data maintenance; and Data utilization. Profile data sources: Profiling data sources involves taking an inventory of all data sources from across your IT landscape. Then evaluate the quality of the data in each source system. This enables the scoping of what data to collect into an MDM hub and what rules are needed to insure data harmonization across systems. Define data strategy: A data strategy requires an understanding of the data usage. Given data usage, various data governance requirements need to be developed. This includes data controls and security rules as well as data structure and usage policies. Define data consolidation strategy: Consolidation requires defining your operational data model. How integration is to be accomplished. Cross referencing common data attributes from multiple systems is needed. Synchronization policies also need to be developed. Data maintenance: The desired standardization needs to be defined, including what constitutes a ‘match’ once the data has been standardized. Cleansing rules are a part of this methodology. Data quality monitoring requirements also need to be defined. Utilize the data: What data gets published, and who consumes the data must be determined. How to get the right data to the right place in the right format given its intended use must be understood. Validating the data and insuring security rules are in place and enforced are crucial aspects for full no-risk data utilization. For each of the above data management areas, a maturity level needs to be assessed. Where your organization wants to be should also be identified using the same maturity levels. This results in a sound gap analysis your organization can use to create action plans to achieve the ultimate goals. Marginal is the lowest level. It is characterized by manually maintaining trusted sources; lacking or inconsistent, silo’d structures with limited integration, and gaps in automation. Stable is the next leg up the MDM maturity staircase. It is characterized by tactical MDM implementations that are limited in scope and target a specific division.  It includes limited data stewardship capabilities as well. Best Practice is a serious MDM maturity level characterized by process automation improvements. The scope is enterprise wide. It is a business solution that provides a single version of the truth, with closed-loop data quality capabilities. It is typically driven by an enterprise architecture group with both business and IT representation.   Transformational is the highest MDM maturity level. At this level, MDM is quantitatively managed. It is integrated with Business Intelligence, SOA, and BPM. MDM is leveraged in business process orchestration. Take an inventory using this MDM Maturity Model and see where you are in your journey to full MDM maturity with all the business benefits that accrue to organizations who have mastered their data for the benefit of all operational applications, business processes, and analytical systems. To learn more, Trevor Naidoo and I have written the Oracle MDM Maturity Model whitepaper. It’s free, so go ahead and download it and use it as you see fit.

  Read the article

• Building on someone else's DefaultButton Silverlight work...

  - by KyleBurns

  This week I was handed a "simple" requirement - have a search screen execute its search when the user pressed the Enter key instead of having to move hands from keyboard to mouse and click Search.  That is a reasonable request that has been met for years both in Windows and Web apps.  I did a quick scan for code to pilfer and found Patrick Cauldwell's Blog posting "A 'Default Button' In Silverlight".  This posting was a great start and I'm glad that the basic work had been done for me, but I ran into one issue - when using bound textboxes (I'm a die-hard MVVM enthusiast when it comes to Silverlight development), the search was being executed before the textbox I was in when the Enter key was pressed updated its bindings.  With a little bit of reflection work, I think I have found a good generic solution that builds upon Patrick's to make it more binding-friendly.  Also, I wanted to set the DefaultButton at a higher level than on each TextBox (or other control for that matter), so the use of mine is intended to be set somewhere such as the LayoutRoot or other high level control and will apply to all controls beneath it in the control tree.  I haven't tested this on controls that treat the Enter key special themselves in the mix. The real change from Patrick's solution here is that in the KeyUp event, I grab the source of the KeyUp event (in my case the textbox containing search criteria) and loop through the static fields on the element's type looking for DependencyProperty instances.  When I find a DependencyProperty, I grab the value and query for bindings.  Each time I find a binding, UpdateSource is called to make sure anything bound to any property of the field has the opportunity to update before the action represented by the DefaultButton is executed. Here's the code: public class DefaultButtonService { public static DependencyProperty DefaultButtonProperty = DependencyProperty.RegisterAttached("DefaultButton", typeof (Button), typeof (DefaultButtonService), new PropertyMetadata (null, DefaultButtonChanged)); private static void DefaultButtonChanged(DependencyObject d, DependencyPropertyChangedEventArgs e) { var uiElement = d as UIElement; var button = e.NewValue as Button; if (uiElement != null && button != null) { uiElement.KeyUp += (sender, arg) => { if (arg.Key == Key.Enter) { var element = arg.OriginalSource as FrameworkElement; if (element != null) { UpdateBindings(element); } if (button.IsEnabled) { button.Focus(); var peer = new ButtonAutomationPeer(button); var invokeProv = peer.GetPattern(PatternInterface.Invoke) as IInvokeProvider; if (invokeProv != null) invokeProv.Invoke(); arg.Handled = true; } } }; } } public static DefaultButtonService GetDefaultButton(UIElement obj) { return (DefaultButtonService) obj.GetValue(DefaultButtonProperty); } public static void SetDefaultButton(DependencyObject obj, DefaultButtonService button) { obj.SetValue(DefaultButtonProperty, button); } public static void UpdateBindings(FrameworkElement element) { element.GetType().GetFields(BindingFlags.Public | BindingFlags.Static).ForEach(field => { if (field.FieldType.IsAssignableFrom(typeof(DependencyProperty))) { try { var dp = field.GetValue(null) as DependencyProperty; if (dp != null) { var binding = element.GetBindingExpression(dp); if (binding != null) { binding.UpdateSource(); } } } // ReSharper disable EmptyGeneralCatchClause catch (Exception) // ReSharper restore EmptyGeneralCatchClause { // swallow exceptions } } }); } }

  Read the article

• Archbeat Link-O-Rama Top 10 Facebook Faves for October 20-26, 2013

  - by OTN ArchBeat

  What are the 4,460 fans of the OTN ArchBeat Facebook Page talking about? The list below represents the Top 10 most popular articles, blog posts, and other content from across the community. Enterprise Grade Deployment Considerations for Oracle Identity Manager AD Connector | Firdaus Fraz Oracle Fusion Middleware solution architect Firdaus Fraz illustrates provides best practice recommendations for setting up an enterprise deployment environment for the OIM connector for Microsoft Active Directory. A Roadmap for SOA Development and Delivery | Mark Nelson Do you know the way to S-O-A? Mark Nelson does. His latest blog post, part of an ongoing series, will help to keep you from getting lost along the way. The road ahead for WebLogic 12c | Edwin Biemond Oracle ACE Edwin Biemond shares his thoughts on announced new features in Oracle WebLogic 12.1.3 & 12.1.4 and compares those upcoming releases to Oracle WebLogic 12.1.2. Oracle GoldenGate 12c - New Release, New Features | Michael Rainey Rittman Mead's Michael Rainey takes you on guided tour through the GoldenGate 12c features that "are relevant to data warehouse and data migration work we typically see in the business intelligence world." Reproducing WebLogic Stuck Threads with ADF CreateInsert Operation and ORDER BY Clause | Andrejus Baranovsikis Another post from Oracle ACE Director Andrejus Baranovsikis on dealing with WebLogic Stuck Threads. This one includes a test case application you can download. The Impact of SaaS - The Times They Are A-Changin' | Floyd Teter Oracle ACE Director Floyd Teter shares some truly interesting insight gained in conversations with three Fortune 500 CIOs. Configure Oracle Identity Manager AD/LDAP Authentication | Arda Eralp A step-by-step how-to from a member of the Fusion Middleware Applications Consultancy team. Java-Powered Robot Named NAO Wows Crowds | Tori Wieldt Tori Wieldt interviews a robot and human. Updated ODI Statement of Direction | Robert Schweighardt Heads up Oracle Data Integrator fans! A new product statement of direction document is available, offering "an overview of the strategic product plans for Oracle’s data integration products for bulk data movement and transformation, specifically Oracle Data Integrator (ODI) and Oracle Warehouse Builder (OWB)." Oracle BI Apps 11.1.1.7.1 – GoldenGate Integration - Part 2: Setup and Configuration | Michael Rainey Michael Rainey continues his series with another technical article for you GoldenGate fans. Thought for the Day "Intuition will tell the thinking mind where to look next." — Jonas Salk, American medical researcher and virologist (October 28, 1914 – June 23, 1995) Source: brainyquote.com

  Read the article

• App_Offline.htm, taking site down for maintenance

  - by Vipin

  There is much simpler and graceful way to shut down a site while doing upgrade to avoid the problem of people accessing site in the middle of a content update.   Basically, if you place file with name 'app_offline.htm' with below contents in the root of a web application directory, ASP.NET will shut-down the application,  and stop processing any new incoming requests for that application.  ASP.NET will also then respond to all requests for dynamic pages in the application by sending back the content of the app_offline.htm file (for example: you might want to have a “site under construction” or “down for maintenance” message).   Then after upgrade, just rename/delete app_offline.htm file…and the site would be back to normal. Just remember that the size of the file should be greater than 512 bytes, doesn't matter even if you add some comments to it to push the byte size as long as it's of the size greater than 512 - it'll work fine.     <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><html http://www.w3.org/1999/xhtml"http://www.w3.org/1999/xhtml" ><head>    <title>Maintenance Mode - Outage Message</title></head><body>    <h1>Maintenance Mode</h1>     <p>We're currently undergoing scheduled maintenance. We will come back very shortly.</p>     <p>Sorry for the inconvenience!</p>     <!--            Adding additional hidden content so that IE Friendly Errors don't prevent    this message from displaying (note: it will show a "friendly" 404    error if the content isn't of a certain size).        <h2>Site under maintenance...</h2>      <h2>Site under maintenance...</h2>      <h2>Site under maintenance...</h2>      <h2>Site under maintenance...</h2>      <h2>Site under maintenance...</h2>      <h2>Site under maintenance...</h2>      <h2>Site under maintenance...</h2>      <h2>Site under maintenance...</h2>         --></body></html>

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

• Are Chief Digital Officers the Result of CMO/CIO Refusal to Change?

  - by Mike Stiles

  Apparently CDO no longer just stands for “Collateralized Debt Obligations.”  It stands for Chief Digital Officer. And they’re the ones who are supposed to answer the bat signal CEO’s are throwing into the sky, swoop in and POW! drive the transition of the enterprise to integrated digital systems. So imagine being a CMO or a CIO at such an enterprise and realizing it’s been determined that you are not the answer that’s needed. In fact, IntelligentHQ author Ashley Friedlein points out the very rise of the CDO is an admission of C-Suite failure to become savvy enough, quickly enough in modern technology. Is that fair? Despite the repeated drumbeat that CMO’s and CIO’s must enter a new era of cooperation and collaboration to enact the social-enabled enterprise, the verdict seems to be that if it’s happening at all, it’s not happening fast enough. Therefore, someone else is needed with the authority to make things happen. So who is this relatively new beast? Gartner VP David Willis says, “The Chief Digital Officer plays in the place where the enterprise meets the customer, where the revenue is generated, and the mission accomplished.” In other words, where the rubber meets the road. They aren’t just another “C” heading up a unit. They’re the CEO’s personal SWAT team, able to call the shots necessary across all units to affect what has become job one…customer experience. And what are the CMO’s and CIO’s doing while this is going on? Playing corporate games. Accenture reports 38% of CMOs say IT deliberately keeps them out of the loop, with 35% saying marketing’s needs aren’t a very high priority. 31% of CIOs say marketers don’t understand tech and regularly go around them for solutions. Fun! Meanwhile the CEO feels the need to bring in a parental figure to pull it all together. Gartner thinks 25% of all orgs will have a CDO by 2015 as CMO’s and particularly CIO’s (Peter Hinssen points out many CDO’s are coming “from anywhere but IT”) let the opportunity to be the agent of change their company needs slip away. Perhaps most interestingly, these CDO’s seem to be entering the picture already on the fast track. One consultancy counted 7 instances of a CDO moving into the CEO role, which, as this Wired article points out, is pretty astounding since nobody ever heard of the job a few years ago. And vendors are quickly figuring out that this is the person they need to be talking to inside the brand. The position isn’t without its critics. Forrester’s Martin Gill says the reaction from executives at some traditional companies to someone being brought in to be in charge of digital might be to wash their own hands of responsibility for all things digital – a risky maneuver given the pervasiveness of digital in business. They might not even be called Chief Digital Officers. They might be the Chief Customer Officer, Chief Experience Officer, etc. You can call them Twinkletoes if you want to, but essentially anyone who has the mandate direct from the CEO to enact modern technology changes not currently being championed by the CMO or CIO can be regarded as “boss.” @mikestiles @oraclesocialPhoto: freedigitalphotos.net

  Read the article

• OSB 11g & SAP – Single Channel/Program ID for Multiple IDOCs

  - by Shub Lahiri, A-Team

  Background This note is a supplement to the blog entry, SOA 11g & SAP – Single Channel/Program ID for Multiple IDOCs by Greg Mally. Greg has shown how a single SOA Suite composite can be used with iWay Adapters to receive multiple IDOC types via a single channel in the adapter, corresponding to a single programID on the SAP system. We will try to address the same requirements within the OSB framework here. Project Built - Design Time The basic build of an OSB project with iWay SAP Adapter, as seen in another entry in this blog, consists of working in OSB Design console and Application Explorer. OSB Design Time - Part 1 We will create a placeholder project first in OSB with a proper directory structure, so that we can export the WSDL, XSD and the JCA binding information from Application Explorer directly into this project. Application Explorer - iWay Design Time Tool Receiving IDOCs is classified as an inbound event within Application Explorer. For setting up events, a channel is first defined (e.g. iDoc_Channel) using the same PROGRAMID (RFC destination), as defined within SAP for the OSB server. Next, the same channel is used to export the JCA Inbound Event artifacts for the candidate IDOC, e.g. DEBMAS06 directly to the pre-created OSB project. Note that the validation for schema has been turned off. As a result, this will allow the adapter, at runtime, to use a single channel to receive multiple IDOC types from SAP and pass them on to the OSB runtime engine without any validation. In other words, we do not have to repeat the above step for each IDOC type. OSB Design Time - Part 2 Create 2 simple XML based Business Services to write to a file, e.g.  SAP_DEBMAS_File and SAP_MATMAS_File. Next, generate a Proxy Service using the JCA binding file exported from Application Explorer in the previous section. In the generated proxy service, edit the message flow and add a route node. Add a routing table in the route node with the following routing function. fn:local-name-from-QName(fn:node-name($body/*[1])) This function takes advantage of the fact that the XML payload at runtime, after translation by adapter, has the IDOC type as the top element. With the routing function in place, build the routing table to add 2 branches to route the IDOCs to the appropriate Business Service for writing the XML payload to files in separate directories. This completes the build of the OSB project. Testing - Run-Time After deployment and activation, the SAP adapter will wait to receive multiple types of IDOCs sent from the SAP system using a single channel. Upon receipt of the IDOCs, the OSB project will route them appropriately to save the corresponding XML payloads for different IDOC types in different directories.

  Read the article

• How would I handle input with a Game Component?

  - by Aufziehvogel

  I am currently having problems from finding my way into the component-oriented XNA design. I read an overview over the general design pattern and googled a lot of XNA examples. However, they seem to be right on the opposite site. In the general design pattern, an object (my current player) is passed to InputComponent::update(Player). This means the class will know what to do and how this will affect the game (e.g. move person vs. scroll text in a menu). Yet, in XNA GameComponent::update(GameTime) is called automatically without a reference to the current player. The only XNA examples I found built some sort of higher-level Keyboard engine into the game component like this: class InputComponent: GameComponent { public void keyReleased(Keys); public void keyPressed(Keys); public bool keyDown(Keys); public void override update(GameTime gameTime) { // compare previous state with current state and // determine if released, pressed, down or nothing } } Some others went a bit further making it possible to use a Service Locator by a design like this: interface IInputComponent { public void downwardsMovement(Keys); public void upwardsMovement(Keys); public bool pausedGame(Keys); // determine which keys pressed and what that means // can be done for different inputs in different implementations public void override update(GameTime); } Yet, then I am wondering if it is possible to design an input class to resolve all possible situations. Like in a menu a mouse click can mean "click that button", but in game play it can mean "shoot that weapon". So if I am using such a modular design with game components for input, how much logic is to be put into the InputComponent / KeyboardComponent / GamepadComponent and where is the rest handled? What I had in mind, when I heard about Game Components and Service Locator in XNA was something like this: use Game Components to run the InputHandler automatically in the loop use Service Locator to be able to switch input at runtime (i.e. let player choose if he wants to use a gamepad or a keyboard; or which shall be player 1 and which player 2). However, now I cannot see how this can be done. First code example does not seem flexible enough, as on a game pad you could require some combination of buttons for something that is possible on keyboard with only one button or with the mouse) The second code example seems really hard to implement, because the InputComponent has to know in which context we are currently. Moreover, you could imagine your application to be multi-layered and let the key-stroke go through all layers to the bottom-layer which requires a different behaviour than the InputComponent would have guessed from the top-layer. The general design pattern with passing the Player to update() does not have a representation in XNA and I also cannot see how and where to decide which class should be passed to update(). At most time of course the player, but sometimes there could be menu items you have to or can click I see that the question in general is already dealt with here, but probably from a more elobate point-of-view. At least, I am not smart enough in game development to understand it. I am searching for a rather code-based example directly for XNA. And the answer there leaves (a noob like) me still alone in how the object that should receive the detected event is chosen. Like if I have a key-up event, should it go to the text box or to the player?

  Read the article

• Forms&Reports upgrade characterset issues

  - by Lukasz Romaszewski

  Hello,This quick post is based on my findings during recent IMC workshops, especially those related to upgrading the Forms 6i/9i/10g applications to Forms 11g platform. The upgrade process itself is pretty straightforward and it basically requires recompiling your Forms application with a latest version of frmcmp tool. For some cases though, especially when you migrate from Forms 6i which is a client-server architecture to a 3-tier web solution (Forms 11g), you need to rewrite some parts of your code to make it run on new platform. The things you need to change range from reimplementing (using webutil library) typical client-site functionality like local IO operation, access to WinAPI, invoking DLLs etc. to changing deprecated or obsolete APIs like RUN_PRODUCT to RUN_REPORT_OBJECT. To automate those changes Oracle provides complete Java API  which allows you to manipulate the code and structure of you modules (JDAPI). To make it even easier we can use Forms Migration Assistant tool (written in Java using JDAPI) which is able to replace all occurrences of old API entries with their 11g equivalents or warn you when the replacement is not possible. You can also add your own replacement definitions in the search_replace.properties file. But you need to be aware of some issues that can be encountered using this tool. First of all if you are using some hard-coded text inside your triggers you may notice that after processing them by the Migration Assistant tool the national characters may be lost. This is due to the fact that you need to explicitly tell Java application (which MA really is) what kind of characterset it should use to read those text properly. In order to do that just add to a script calling MA the following line:  export JAVA_TOOL_OPTIONS=-Dfile.encoding=<JAVA_ISO_ENCODING>  when the particular encoding must match the NLS_LANG in your Forms Builder environment (for example for Polish characterset you need to use ISO-8859-2).Second issue you can encounter related to national charactersets is lack of national symbols in you reports after migration. This can be solved by adding appropriate NLS_LANG entry in your reports environment. Sometimes instead of particular characterset you see "Greek characters" in your reports. This is just default font used by reports engine instead of the one defined in your report. To solve it you must copy fonts definitions from your old environment (e.g. Forms 10g installation) to appropriate directory in new installation (usually AFM folder). For more information about this and other issues please refer to https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=1297012.1at My Oracle Support site. That's all for today, stay tuned for more posts on this topic! Lukasz

  Read the article

• Referencing a picture in another DLL in Silverlight and Windows Phone 7

  - by Laurent Bugnion

  This one has burned me a few times, so here is how it works for future reference: Usually, when I add an Image control into a Silverlight application, and the picture it shows is local (as opposed to loaded from the web), I set the picture’s Build Action to Content, and the Copy to Output Directory to Copy if Newer. What the compiler does then is to copy the picture to the bin\Debug folder, and then to pack it into the XAP file. In XAML, the syntax to refer to this local picture is: <Image Source="/Images/mypicture.jpg" Width="100" Height="100" /> And in C#: return new BitmapImage(new Uri( "/Images/mypicture.jpg", UriKind.Relative)); One of the features of Silverlight is to allow referencing content (pictures, resource dictionaries, sound files, movies etc…) located in a DLL directly. This is very handy because just by using the right syntax in the URI, you can do this in XAML directly, for example with: <Image Source="/MyApplication;component/Images/mypicture.jpg" Width="100" Height="100" /> In C#, this becomes: return new BitmapImage(new Uri( "/MyApplication;component/Images/mypicture.jpg", UriKind.Relative)); Side note: This kind of URI is called a pack URI and they have been around since the early days of WPF. There is a good tutorial about pack URIs on MSDN. Even though it refers to WPF, it also applies to Silverlight Side note 2: With the Build Action set to Content, you can rename the XAP file to ZIP, extract all the files, change the picture (but keep the same name), rezip the whole thing and rename again to XAP. This is not possible if the picture is embedded in an assembly! So what’s the catch? Well the catch is that this does not work if you set the Build Action to Content. It’s actually pretty simple to explain: The pack URI above tells the Silverlight runtime to look within an assembly named MyOtherAssembly for a file named MyPicture.jpg in the Images folder. If the file is included as Content, however, it is not in the assembly. Silverlight does not find it, and silently returns nothing. The image is not displayed. And the fix? The fix, for class libraries, is to set the Build Action to Resource. With this, the picture will gets packed into the DLL itself. Of course, this will increase the size of the DLL, and any change to the picture will require recompiling the class library, which is not ideal. But in the cases where you want to distribute pictures (icons etc) together with a plug-in assembly, well, this is a good way to have everything in the same place Happy coding, Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Virtual Lab part 2&ndash;Templates, Patterns, Baselines

  - by Geoff N. Hiten

  Once you have a good virtualization platform chosen, whether it is a desktop, server or laptop environment, the temptation is to build “X”.  “X” may be a SharePoint lab, a Virtual Cluster, an AD test environment or some other cool project that you really need RIGHT NOW.  That would be doing it wrong. My grandfather taught woodworking and cabinetmaking for twenty-seven years at a trade school in Alabama.  He was the first instructor hired at that school and the only teacher for the first two years.  His students built tables, chairs, and workbenches so the school could start its HVAC courses.   Visiting as a child, I also noticed many extra “helper” stands, benches, holders, and gadgets all built from wood.  What does that have to do with a virtual lab, you ask?  Well, that is the same approach you should take.  Build stuff that you will use.  Not for solving a particular problem, but to let the Virtual Lab be part of your normal troubleshooting toolkit. Start with basic copies of various Operating Systems.  Load and patch server and desktop OS environments.  This also helps build your collection of ISO files, another essential element of a virtual Lab.  Once you have these “baseline” images, you can use your Virtualization software’s snapshot capability to freeze the image.  Clone the snapshot and you have a brand new fully patched machine in mere moments.  You may have to sysprep some of the Microsoft OS environments if you are going to create a domain environment or experiment with clustering.  That is still much faster than loading and patching from scratch. So once you have a stock of raw materials (baseline images in this case) where should you start.  Again, my grandfather’s workshop gives us the answer.  In the shop it was workbenches and tables to hold large workpieces that made the equipment more useful.  In a Windows environment the same role falls to the fundamental network services:  DHCP, DNS, Active Directory, Routing, File Services, and Storage services.  Plan your internal network setup.  Build out an AD controller with all the features listed.  Make the actual domain an isolated domain so it will not care about where you take it.  Add the Microsoft iSCSI target.  Once you have this single system, you can leverage it for almost any network environment beyond a simple stand-alone system. Having these templates and fundamental infrastructure elements ready to run means I can build a quick lab in minutes instead of hours.  My solutions are well-tested, my processes fully documented with screenshots, and my plans validated well before I have to make any changes to client systems.  the work I put in is easily returned in increased value and client satisfaction.

  Read the article

• Antenna Aligner Part 4: Role'ing in the deep

  - by Chris George

  Since last time I've been trying to sort out the general workflow of the app. It's fundamentally not hard, there is a list of transmitters, you select a transmitter and it shows the compass view. Having done quite a bit of ajax/asp.net/html in the past, I immediately started off by creating two divs within my 'page', one for the list, one for the compass. Then using the onClick event in the list, this will switch the display attribute on the divs. This seemed to work, but did lead to some dodgy transitional redrawing artefacts which I was not happy with. So after some Googling I realised I was doing it all wrong! JQuery mobile has the concept of giving an object in html a data-role. By giving a div the attribute data-role="page" it is then treated as a separate page on the mobile device. Within the code, this is referenced like a html anchor in the form #mypage. Using this system, page transitions such as fade or slide are automatically applied which adds to the whole authenticity of the app! Here is a simple example: . <a href="#'compasspage">compass</a> . <div data-role="page" id="compasspage" data-add-back-btn="true"> But I don't want just a static link, I want to dynamically create my list, and get each list elements to switch to the compass page with the right information. So here is the jquery that I used to dynamically inject new <li> rows into the <ul> block. $('ul').append($('<li/>', {    //here appendin `<li>`     'data-role': "list-divider" }).append($('<a/>', {    //here appending `<a>` into `<li>`     'href': '#compasspage',     'data-transition': 'none',     'onclick': 'selectTx(' + i + ')',     'html': buttonHtml }))); $('ul').listview('refresh'); This is called within a for loop so the first 5 appropriate transmitters are used. There are several things of interest to note here. Firstly, I could not find a more elegant way to tell the target page which transmitter I've clicked on, so I have used the onclick event as well as the href attribute. The onclick event fires 'selectTx' which simply sets a global member variable to the specific index number I've clicked on. Yes it's not nice, but it works. Secondly, the data-transition attribute is set to 'none'. I wanted the transition between the pages to be a whooshy slidey effect. However this worked going to the compass page, but returning to the list page gave some undesirable visual artefacts (flickering, redrawing etc.). So I decided to remove the transitions all together, which was a shame. Thirdly, rather than embedding loads of html into the append command, I removed this out into a variable 'buttonHtml'. Doing this really tidied up my code. Until next time!

  Read the article

• Question on the implementation of my Entity System

  - by miguel.martin

  I am currently creating an Entity System, in C++, it is almost completed (I have all the code there, I just have to add a few things and test it). The only thing is, I can't figure out how to implement some features. This Entity System is based off a bit from the Artemis framework, however it is different. I'm not sure if I'll be able to type this out the way my head processing it. I'm going to basically ask whether I should do something over something else. Okay, now I'll give a little detail on my Entity System itself. Here are the basic classes that my Entity System uses to actually work: Entity - An Id (and some methods to add/remove/get/etc Components) Component - An empty abstract class ComponentManager - Manages ALL components for ALL entities within a Scene EntitySystem - Processes entities with specific components Aspect - The class that is used to help determine what Components an Entity must contain so a specific EntitySystem can process it EntitySystemManager - Manages all EntitySystems within a Scene EntityManager - Manages entities (i.e. holds all Entities, used to determine whether an Entity has been changed, enables/disables them, etc.) EntityFactory - Creates (and destroys) entities and assigns an ID to them Scene - Contains an EntityManager, EntityFactory, EntitySystemManager and ComponentManager. Has functions to update and initialise the scene. Now in order for an EntitySystem to efficiently know when to check if an Entity is valid for processing (so I can add it to a specific EntitySystem), it must recieve a message from the EntityManager (after a call of activate(Entity& e)). Similarly the EntityManager must know when an Entity is destroyed from the EntityFactory in the Scene, and also the ComponentManager must know when an Entity is created AND destroyed. I do have a Listener/Observer pattern implemented at the moment, but with this pattern I may remove a Listener (which is this case is dependent on the method being called). I mainly have this implemented for specific things related to a game, i.e. Teams, Tagging of entities, etc. So... I was thinking maybe I should call a private method (using friend classes) to send out when an Entity has been activated, deleted, etc. i.e. taken from my EntityFactory void EntityFactory::killEntity(Entity& e) { // if the entity doesn't exsist in the entity manager within the scene if(!getScene()->getEntityManager().doesExsist(e)) { return; // go back to the caller! (should throw an exception or something..) } // tell the ComponentManager and the EntityManager that we killed an Entity getScene()->getComponentManager().doOnEntityWillDie(e); getScene()->getEntityManager().doOnEntityWillDie(e); // notify the listners for(Mouth::iterator i = getMouth().begin(); i != getMouth().end(); ++i) { (*i)->onEntityWillDie(*this, e); } _idPool.addId(e.getId()); // add the ID to the pool delete &e; // delete the entity } As you can see on the lines where I am telling the ComponentManager and the EntityManager that an Entity will die, I am calling a method to make sure it handles it appropriately. Now I realise I could do this without calling it explicitly, with the help of that for loop notifying all listener objects connected to the EntityFactory's Mouth (an object used to tell listeners that there's an event), however is this a good idea (good design, or what)? I've gone over the PROS and CONS, I just can't decide what I want to do. Calling Explicitly: PROS Faster? Since these functions are explicitly called, they can't be "removed" CONS Not flexible Bad design? (friend functions) Calling through Listener objects (i.e. ComponentManager/EntityManager inherits from a EntityFactoryListener) PROS More Flexible? Better Design? CONS Slower? (virtual functions) Listeners can be removed, i.e. may be removed and not get called again during the program, which could cause in a crash. P.S. If you wish to view my current source code, I am hosting it on BitBucket.

  Read the article

• What's the best way to install the GD graphics library for Nagios?

  - by user1196

  While trying to install Nagios 3.2.3, I ran their ./configure script and got these errors: checking for main in -liconv... no checking for gdImagePng in -lgd (order 1)... no checking for gdImagePng in -lgd (order 2)... no checking for gdImagePng in -lgd (order 3)... no checking for gdImagePng in -lgd (order 4)... no *** GD, PNG, and/or JPEG libraries could not be located... ********* Boutell's GD library is required to compile the statusmap, trends and histogram CGIs. Get it from http://www.boutell.com/gd/, compile it, and use the --with-gd-lib and --with-gd-inc arguments to specify the locations of the GD library and include files. NOTE: In addition to the gd-devel library, you'll also need to make sure you have the png-devel and jpeg-devel libraries installed on your system. NOTE: After you install the necessary libraries on your system: 1. Make sure /etc/ld.so.conf has an entry for the directory in which the GD, PNG, and JPEG libraries are installed. 2. Run 'ldconfig' to update the run-time linker options. 3. Run 'make clean' in the Nagios distribution to clean out any old references to your previous compile. 4. Rerun the configure script. NOTE: If you can't get the configure script to recognize the GD libs on your system, get over it and move on to other things. The CGIs that use the GD libs are just a small part of the entire Nagios package. Get everything else working first and then revisit the problem. Make sure to check the nagios-users mailing list archives for possible solutions to GD library problems when you resume your troubleshooting. ******************************************************************** Which package do I want? libgd2-xpm-dev? libgd2-noxpm-dev? php5-gd? I'm not looking to do any image processing myself - I just want to get Nagios working.

  Read the article

• How do I make the launcher progress bar work with my application?

  - by Kevin Gurney

  Background Research I am attempting to update the progress bar within the Unity launcher for a simple python/Gtk application created using Quickly called test; however, following the instructions in this video, I have not been able to successfully update the progress bar in the Unity launcher. In the Unity Integration video, Quickly was not used, so the way that the application was structured was slightly different, and the code used in the video does not seem to function properly without modification in a default Quickly ubuntu-application template application. Screenshots Here is a screenshot of the application icon as it is currently displayed in the Unity Launcher. Here is a screenshot of the kind of Unity launcher progress bar functionality that I would like (overlayed on mail icon: wiki.ubuntu.com). Code class TestWindow(Window): __gtype_name__ = "TestWindow" def finish_initializing(self, builder): # pylint: disable=E1002 """Set up the main window""" super(TestWindow, self).finish_initializing(builder) self.AboutDialog = AboutTestDialog self.PreferencesDialog = PreferencesTestDialog # Code for other initialization actions should be added here. self.add_launcher_integration() def add_launcher_integration(self): self.launcher = Unity.LauncherEntry.get_for_desktop_id("test.destkop") self.launcher.set_property("progress", 0.75) self.launcher.set_property("progress_visible", True) Expected Behavior I would expect the above code to show a progress bar that is 75% full overlayed on the icon for the test application in the Unity Launcher, but the application only runs and displays no progress bar when the command quickly run is executed. Problem Investigation I believe that the problem is that I am not properly getting a reference to the application's main window, however, I am not sure how to properly fix this problem. I also believe that the line: self.launcher = Unity.LauncherEntry.get_for_desktop_id("test.destkop") may be another source of complication because Quickly creates .desktop.in files rather than ordinary .desktop files, so I am not sure if that might be causing issues as well. Perhaps, another source of the issue is that I do not entirely understand the difference between .desktop and .desktop.in files. Does it possibly make sense to make a copy of the test.desktop.in file and rename it test.desktop, and place it in /usr/share/applications in order for get_for_desktop_id("test,desktop") to reference the correct .desktop file? Related Research Links Although, I am still not clear on the difference between .desktop and .desktop.in files, I have done some research on .desktop files and I have come across a couple of links: Desktop Entry Files (library.gnome.org) Desktop File Installation Directory (askubuntu.com) Unity Launcher API (wiki.ubuntu.com) Desktop Files: putting your application in the desktop menus (developer.gnome.org) Desktop Menu Specification (standards.freedesktop.org)

  Read the article

• How can I easily retab html files according to some sane default?

  - by James

  I have some html files that I'd like to retab that look like this: <header> <div class="wrapper"> <img src="images/logo.png"> <div class="userbox"> <div class="welcome">Welcome Andy!</div> <div class="blackbox"> <ul> <li><a href="#">Invite Friends</a></li> <li><a href="#">My Account</a></li> <li><a href="#">Cart</a></li> <li><a href="#">Sign Out</a></li> </ul> </div> </div> </div> </header> And I want them to look something like this: <header> <div class="wrapper"> <img src="images/logo.png"> <div class="userbox"> <div class="welcome">Welcome Andy!</div> <div class="blackbox"> <ul> <li><a href="#">Invite Friends</a></li> <li><a href="#">My Account</a></li> <li><a href="#">Cart</a></li> <li><a href="#">Sign Out</a></li> </ul> </div> </div> </div> </header> Or some sane default. What's the easiest way to go about doing this from the terminal in ubuntu for all of the html files in the current directory?

  Read the article

• Apache - create multiple aliases

  - by mc3mcintyre

  I'm trying to setup two websites on my Apache server. One is www.domain.com and the other is test.domain.com. Currently, my 000-default.conf file reads as follows: <VirtualHost www:80> # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. #ServerName www.domain.com #ServerAlias www ServerAdmin [email protected] DocumentRoot /var/www/domain.com/ # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn ErrorLog ${APACHE_LOG_DIR}/domain.error.log CustomLog ${APACHE_LOG_DIR}/domain.access.log combined UseCanonicalName on allow from all Options +Indexes # For most configuration files from conf-available/, which are # enabled or disabled at a global level, it is possible to # include a line for only one particular virtual host. For example the # following line enables the CGI configuration for this host only # after it has been globally disabled with "a2disconf". #Include conf-available/serve-cgi-bin.conf </VirtualHost> <VirtualHost test:80> DocumentRoot "/var/www/domain.com/test/" ServerName test.domain.com ServerAdmin [email protected] ErrorLog ${APACHE_LOG_DIR}/test.domain.error.log CustomLog ${APACHE_LOG_DIR}/test.domain.access.log combined UseCanonicalName on allow from all Options +Indexes </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet As is, when I use a browser to go to the www location, it show me a directory listing. However, if I remove the www:80 on Line 1 and replace it with *:80, it correctly displays the webpage. I don't understand why. Can anyone help me configure this 000-default.conf file so that www goes to "/var/www/domain.com" and that test goes to "/var/www/domain.com/test"? Thank you.

  Read the article

• C++ OpenGL wireframe cube rendering blank

  - by caleb.breckon

  I'm just trying to draw a bunch of lines that make up a "cube". I can't for the life of me figure out why this is producing a black screen. The debugger does not break at any point. I'm sure it's a problem with my pointers, as I'm only decent at them in regular c++ and in OpenGL it gets even worse. const char* vertexSource = "#version 150\n" "in vec3 position;" "void main() {" " gl_Position = vec4(position, 1.0);" "}"; const char* fragmentSource = "#version 150\n" "out vec4 outColor;" "void main() {" " outColor = vec4(1.0, 1.0, 1.0, 1.0);" "}"; int main() { initializeGLFW(); // Initialize GLEW glewExperimental = GL_TRUE; glewInit(); // Create Vertex Array Object GLuint vao; glGenVertexArrays(1, &vao); glBindVertexArray(vao); // Create a Vertex Buffer Object and copy the vertex data to it GLuint vbo; glGenBuffers( 1, &vbo ); float vertices[] = { 1.0f, 1.0f, 1.0f, // Vertex 0 (X, Y, Z) -1.0f, 1.0f, 1.0f, // Vertex 1 (X, Y, Z) -1.0f, -1.0f, 1.0f, // Vertex 2 (X, Y, Z) 1.0f, -1.0f, 1.0f, // Vertex 3 (X, Y, Z) 1.0f, 1.0f, -1.0f, // Vertex 4 (X, Y, Z) -1.0f, 1.0f, -1.0f, // Vertex 5 (X, Y, Z) -1.0f, -1.0f, -1.0f, // Vertex 6 (X, Y, Z) 1.0f, -1.0f, -1.0f // Vertex 7 (X, Y, Z) }; GLuint indices[] = { 0, 1, 1, 2, 2, 3, 3, 0, 4, 5, 5, 6, 6, 7, 7, 4, 0, 4, 1, 5, 2, 6, 3, 7 }; glBindBuffer( GL_ARRAY_BUFFER, vbo ); glBufferData( GL_ARRAY_BUFFER, sizeof( vertices ), vertices, GL_STATIC_DRAW ); //glBindBuffer( GL_ELEMENT_ARRAY_BUFFER, vbo); //glBufferData( GL_ELEMENT_ARRAY_BUFFER, sizeof( indices ), indices, GL_STATIC_DRAW ); // Create and compile the vertex shader GLuint vertexShader = glCreateShader( GL_VERTEX_SHADER ); glShaderSource( vertexShader, 1, &vertexSource, NULL ); glCompileShader( vertexShader ); // Create and compile the fragment shader GLuint fragmentShader = glCreateShader( GL_FRAGMENT_SHADER ); glShaderSource( fragmentShader, 1, &fragmentSource, NULL ); glCompileShader( fragmentShader ); // Link the vertex and fragment shader into a shader program GLuint shaderProgram = glCreateProgram(); glAttachShader( shaderProgram, vertexShader ); glAttachShader( shaderProgram, fragmentShader ); glBindFragDataLocation( shaderProgram, 0, "outColor" ); glLinkProgram (shaderProgram); glUseProgram( shaderProgram); // Specify the layout of the vertex data GLint posAttrib = glGetAttribLocation( shaderProgram, "position" ); glEnableVertexAttribArray( posAttrib ); glVertexAttribPointer( posAttrib, 3, GL_FLOAT, GL_FALSE, 0, 0 ); // Main loop while(glfwGetWindowParam(GLFW_OPENED)) { // Clear the screen to black glClearColor( 0.0f, 0.0f, 0.0f, 1.0f ); glClear( GL_COLOR_BUFFER_BIT ); // Draw lines from 2 vertices glDrawElements(GL_LINES, sizeof(indices), GL_UNSIGNED_INT, indices ); // Swap buffers glfwSwapBuffers(); } // Clean up glDeleteProgram( shaderProgram ); glDeleteShader( fragmentShader ); glDeleteShader( vertexShader ); //glDeleteBuffers( 1, &ebo ); glDeleteBuffers( 1, &vbo ); glDeleteVertexArrays( 1, &vao ); glfwTerminate(); exit( EXIT_SUCCESS ); }

  Read the article

• Collision detection via adjacent tiles - sprite too big

  - by BlackMamba

  I have managed to create a collision detection system for my tile-based jump'n'run game (written in C++/SFML), where I check on each update what values the surrounding tiles of the player contain and then I let the player move accordingly (i. e. move left when there is an obstacle on the right side). This works fine when the player sprite is not too big: Given a tile size of 5x5 pixels, my solution worked quite fine with a spritesize of 3x4 and 5x5 pixels. My problem is that I actually need the player to be quite gigantic (34x70 pixels given the same tilesize). When I try this, there seems to be an invisible, notably smaller boundingbox where the player collides with obstacles, the player also seems to shake strongly. Here some images to explain what I mean: Works: http://tinypic.com/r/207lvfr/8 Doesn't work: http://tinypic.com/r/2yuk02q/8 Another example of non-functioning: http://tinypic.com/r/kexbwl/8 (the player isn't falling, he stays there in the corner) My code for getting the surrounding tiles looks like this (I removed some parts to make it better readable): std::vector<std::map<std::string, int> > Game::getSurroundingTiles(sf::Vector2f position) { // converting the pixel coordinates to tilemap coordinates sf::Vector2u pPos(static_cast<int>(position.x/tileSize.x), static_cast<int>(position.y/tileSize.y)); std::vector<std::map<std::string, int> > surroundingTiles; for(int i = 0; i < 9; ++i) { // calculating the relative position of the surrounding tile(s) int c = i % 3; int r = static_cast<int>(i/3); // we subtract 1 to place the player in the middle of the 3x3 grid sf::Vector2u tilePos(pPos.x + (c - 1), pPos.y + (r - 1)); // this tells us what kind of block this tile is int tGid = levelMap[tilePos.y][tilePos.x]; // converts the coords from tile to world coords sf::Vector2u tileRect(tilePos.x*5, tilePos.y*5); // storing all the information std::map<std::string, int> tileDict; tileDict.insert(std::make_pair("gid", tGid)); tileDict.insert(std::make_pair("x", tileRect.x)); tileDict.insert(std::make_pair("y", tileRect.y)); // adding the stored information to our vector surroundingTiles.push_back(tileDict); } // I organise the map so that it is arranged like the following: /* * 4 | 1 | 5 * -- -- -- * 2 | / | 3 * -- -- -- * 6 | 0 | 7 * */ return surroundingTiles; } I then check in a loop through the surrounding tiles, if there is a 1 as gid (indicates obstacle) and then check for intersections with that adjacent tile. The problem I just can't overcome is that I think that I need to store the values of all the adjacent tiles and then check for them. How? And may there be a better solution? Any help is appreciated. P.S.: My implementation derives from this blog entry, I mostly just translated it from Objective-C/Cocos2d.

  Read the article

• PowerShell – Show a Notification Balloon

  - by BuckWoody

  In my presentations for PowerShell I sometimes want to start a process (like a backup) that will take some time. I normally pop up a notification “balloon” at the start, and then do the bulk of the work, and then pop up a balloon at the end to let me know it’s done. You can actually try out this little sample (on a test system, of course) without any other code to see what it does. Then just put the other PowerShell commands in the #Do Some Work part. Oh – throw an icon (.ico file) in a c:\temp directory or point that somewhere else. (No, this probably isn’t original. Can’t remember where I saw the original code, but I’ve modified it a bit anyway, so if you’re the original author and this looks slightly familiar, post a comment.) [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") $objBalloon = New-Object System.Windows.Forms.NotifyIcon $objBalloon.Icon = "C:\temp\Folder.ico" # You can use the value Info, Warning, Error $objBalloon.BalloonTipIcon = "Info" # Put what you want to say here for the Start of the process $objBalloon.BalloonTipTitle = "Begin Title" $objBalloon.BalloonTipText = "Begin Message" $objBalloon.Visible = $True $objBalloon.ShowBalloonTip(10000) # Do some work # Put what you want to say here for the completion of the process $objBalloon.BalloonTipTitle = "End Title" $objBalloon.BalloonTipText = "End Message" $objBalloon.Visible = $True $objBalloon.ShowBalloonTip(10000) Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

< Previous Page | 817 818 819 820 821 822 823 824 825 826 827 828  | Next Page >