Search Results

Search found 24335 results on 974 pages for 'document property'.

Page 827/974 | < Previous Page | 823 824 825 826 827 828 829 830 831 832 833 834  | Next Page >

  • make my file readable as either Perl or HTML

    - by JoelFan
    In the spirit of the "Perl Preamble" where a script works properly whether executed by a shell script interpreter or the Perl interpreter... I have a Perl script which contains an embedded HTML document (as a "heredoc"), i.e.: #!/usr/bin/perl ... some perl code ... my $html = <<'END' ; <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> ... more HTML ... </html> END ... perl code that processes $html ... I would like to be able to work on the HTML that's inside the Perl script and check it out using a web browser, and only run the script when the HTML is the way I want. To accomplish this, I need the file to be openable both as an HTML file and as a Perl script. I have tried various tricks with Perl comments and HTML comments but can't get it quite perfect. It doesn't have to be "strictly legal" HTML... just displayable in a browser with no (or minimal) Perl garbage visible.

    Read the article

  • MySQL use certain columns, based on other columns

    - by Rabbott
    I have this query: SELECT COUNT(articles.id) AS count FROM articles, xml_documents, streams WHERE articles.xml_document_id = xml_documents.id AND xml_documents.stream_id = streams.id AND articles.published_at BETWEEN '2010-01-01' AND '2010-04-01' AND streams.brand_id = 7 Which just uses the default equajoin by specifying three tables in csv format in the FROM clause.. What I need to do is group this by a value found within articles.source (raw xml).. so it could turn into this: SELECT COUNT(articles.id) AS count, ExtractValue(articles.source, "/article/media_type") AS media_type FROM articles, xml_documents, streams WHERE articles.xml_document_id = xml_documents.id AND xml_documents.stream_id = streams.id AND articles.published_at BETWEEN '2010-01-01' AND '2010-04-01' AND streams.brand_id = 7 GROUP BY media_type which works fine, the problem is, I'm using rails, and using STI for the xml_documents table. The articles.source that is provided to the ExtractValue method will be of a couple different formats.. So what I need to be able to do is use "/article/media_type" IF xml_documents.type = 'source one' and use "/article/source" if xml_documents.type = 'source two' This is just because the two document types format their XML differently, but I don't want to have to run multiple queries to retrieve this information.. It would be nice if one could use a ternary operator, but i don't think this is possible.. EDIT At this Point I am looking at making a temp table, or simply using UNION to place multiple result sets together..

    Read the article

  • IE innerHTML chops sentence if the last word contains '&' (ampersand)

    - by Mandai
    I am trying to populate a DOM element with ID 'myElement'. The content which I'm populating is a mix of text and HTML elements. Assume following is the content I wish to populate in my DOM element. var x = "<b>Success</b> is a matter of hard work &luck"; I tried using innerHTML as follows, document.getElementById("myElement").innerHTML=x; This resulted in chopping off of the last word in my sentence. Apparently, the problem is due to the '&' character present in the last word. I played around with the '&' and innerHTML and following are my observations. If the last word of the content is less than 10 characters and if it has a '&' character present in it, innerHTML chops off the sentence at '&'. This problem does not happen in firefox. If I use innerText the last word is in tact but then all the HTML tags which are part of the content becomes plain text. I tried populating through jQuery's #html method, $("#myElement").html(x); This approach solves the problem in IE but not in chrome. How can I insert a HTML content with a last word containing '&' without it being chopped off in all browsers?

    Read the article

  • uploadify and each file description

    - by kusanagi
    i want to upload many files and set to each file a description. i have such code <div> <textarea cols="60" id="descriptions" name="descriptions" rows="10"> </textarea> </div> <div id="fileQueue"> </div> <div> <input type="file" name="attach" id="attach" /> </div> <p> <input type="button" id="submit" value="????????" class="bluebutton" /><br /> <a href="javascript:jQuery('#attach').uploadifyClearQueue()">???????? ????????</a> </p> <script type="text/javascript"> var description = ""; var mas; var i = 0; $(document).ready(function() { $("#attach").uploadify({ 'uploader': '/uploadify/uploadify.swf', 'script': '/uploadify/upload.ashx', 'cancelImg': '/uploadify/cancel.png', 'queueID': 'fileQueue', 'multi': true, 'onOpen': function(event, queueID, fileObj) { if (i < mas.length) { description = mas[i++]; } }, 'onComplete': function(event, data) { description = ""; } }); $("#submit").click(function() { i = 0; mas = $("#descriptions").val().split('\n'); $('#attach').uploadifySettings("scriptData", { 'description': description }); $('#attach').uploadifyUpload(); }); }); </script> so idea- i put short description into textarea descriptions, then i make array and try to put one item of array to apload script, but it not work. description is null. any ideas?

    Read the article

  • Trying to connect to QuickBooks via Web Connect in asp.net

    - by ile
    I don't know if any of you have had experience with QuickBooks integration, but I have to try :) I downloaded QuickBooks Free Simple Start, Quickbooks Web Connector and Web Service sample code ... I've read Web Connector manual and followed instructions but, when using authenticate function, I always get error "nvu", meaning that username or password are not valid. Following instructions, I added this QWC file to QBWC: <?xml version="1.0"?> <QBWCXML> <AppName>My application</AppName> <AppID></AppID> <AppURL>http://localhost/QBWC/Service1.asmx</AppURL> <AppDescription>My application web service</AppDescription> <AppSupport>http://localhost/QBWC/Service1.asmx?wsdl</AppSupport> <OwnerID>{87EDAAF8-637E-4203-867F-4BA79C2F8998}</OwnerID> <FileID>{CA1C3EB8-1B61-4747-A743-8D5B438B83AC}</FileID> <UserName>test</UserName> <QBType>QBFS</QBType> <Style>Document</Style> <AuthFlags>0xF</AuthFlags> </QBWCXML> After adding this this file to QBWC, I also added password "1234". After that, I opened my web service: http://localhost/WCWebService/WCWebService.asmx?op=authenticate and in field "strUserName" entered "test", in field "strPassword" entered: "1234". But "nvu" is always returned as a result. If someone is familiar with this I would appreciate for help!

    Read the article

  • PGP Encrypt from C# using GnuPG

    - by Kishore
    Hello All, I'm trying to encrypt a incoming document in C#, and I'm using GnuPG with input redirection. I need to use -se(sign and encrypt) in a single step, which requires entering passphrase. But for some reason, input redirection is not working. Appreciate your help. Control is going to else block. I'm not sure if there is deadlock or child process(gpg.exe) waiting for the input. pgpproc = new Process(); pgpproc.StartInfo.FileName = exeFilePath; pgpproc.StartInfo.RedirectStandardOutput = false; pgpproc.StartInfo.RedirectStandardInput = true; pgpproc.StartInfo.UseShellExecute = false; pgpproc.StartInfo.Arguments = "-a -o C:\PGPStaging\output.pgp -se -r recipientID C:\PGPStaging\input.txt"; pgpproc.StartInfo.CreateNoWindow = true; pgpproc.Start(); StreamWriter myStreamWriter = pgpproc.StandardInput; myStreamWriter.Write("*****"); myStreamWriter.Close(); if (pgpproc.WaitForExit(waittime)) { //success } else { //failure pgpproc.Kill(); pgpproc.WaitForExit(); } `

    Read the article

  • How to send set of data for Ajax call from jquery with php at the serverside?

    - by Vinodtiru
    I basically have to do a update of a record. I have a set of controls like textbox, list box, radio button etc. Then i have a button on click of which i need to carry all the updated data into mysql database with a ajax request without page refresh. I am using the php with codeigniter as my serverside code. On client side i am able to send the ajax request like $(document).ready(function(){ $('#users_menu').click( function(){ $('#tempdiv').load('http://localhost//web1/index.php/c1',null); } ); }); In the above code the request is placed to a server side php page where i am not able to read the values of the control values (values of textbox, listbox etc). Now this means i should be sending the list with the request. But i am not aware of how to send this request. Please help me with some details of how to send the list of values or is it possible to read the vaules some how in the serverside php code. For your information i am using codeigniter with my php. Any kind of help is appreciated. Thanks and Regards VinodT.

    Read the article

  • CSS div/overflow Question: Why does the first HTML file work but not the second?

    - by kidvid
    Notice how the first HTML/CSS works when you re-size the browser horizontally. It will shrink no further than around 800 pixels, but it will expand as far as you drag the right edge of the browser. It will also correctly overflow the table at the top and scroll it horizontally. The thing I don't like about the first code snippet is where the scrollbar is. I want it to show up within the borders of the fieldset, so even if I narrow the browser down to 800 pixels wide, I can see both the left and right sides of the fieldset's border. The second code snippet is exactly the same as the first except I add another div tag to the mix, inside of the field set and around the grid. Notice how the top fieldset's width won't correctly shrink when you make the viewport of your browser narrower. Any ideas on why it doesn't work, what I can do to get it to work like the first code snippet? I don't think I'm describing this clearly, but if you run the two side by side, and expand and contract the horizontal edge of your browser windows, you'll see the differences between the two. I'm pretty new to CSS and HTML layout, so my understanding of why CSS handles sizing the way it does in some situations is still really confusing to me. Thanks, Adrian Working HTML file: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/> <meta http-equiv="Content-Style-Type" content="text/css"></meta> <style type="text/css"> #divBody { margin-top: 5px; top:24px; margin-top: 10px; } #divContainer { top: 5px; position:relative; min-height:100%; #width:expression(document.body.clientWidth < 830? "800": "90%" ); width:90%; min-width: 800px; padding-bottom:70px; } #divMasterGrid { position:relative; margin:5px; top:5px; width:99%; margin:0 auto; overflow-x:scroll; } #divRadioButtonArea { position:relative; top:20px; height:51px; font-size: 12px; width:99%; margin:5px; } </style> <title>TEST TEST</title> </head> <body id="divBody"> <div id="divContainer" class="gridRegion"> <div id="divMasterGrid"> <fieldset style="margin: 5px;"> <legend style="font-size: 12px; color: #000;">Numbers</legend> <table border="1px"> <tr> <td>One </td> <td>Two </td> <td>Three </td> <td>Fout </td> <td>Five </td> <td>Six </td> <td>Seven </td> <td>Eight </td> <td>Nine </td> <td>Ten </td> <td>Eleven </td> <td>Twelve </td> <td>Thirteen </td> <td>Fourteen </td> <td>Fifteen </td> <td>Sixteen </td> <td>Seventeen </td> <td>Eighteen </td> <td>Nineteen </td> <td>Twenty </td> </tr> </table> </fieldset> </div> <div id="divRadioButtonArea"> <fieldset style=" padding-left: 5px;"> <legend style="color: #000; height:auto">Colors</legend> <table style="width:100%;padding-left:5%;padding-right:5%;"> <tr> <td> <input type="radio" name="A" value="Y"/><label>Red</label> </td> <td> <input type="radio" name="O" value="O"/><label>White</label> </td> <td> <input type="radio" name="W"/><label>Blue</label> </td> </tr> </table> </fieldset> </div> </div> </body> </html> Broken HTML file: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/> <meta http-equiv="Content-Style-Type" content="text/css"></meta> <style type="text/css"> #divBody { margin-top: 5px; top:24px; margin-top: 10px; } #divContainer { top: 5px; position:relative; min-height:100%; #width:expression(document.body.clientWidth < 830? "800": "90%" ); width:90%; min-width: 800px; padding-bottom:70px; } #divTopFieldSet { position:relative; margin:5px; top:5px; width:99%; } #divRadioButtonArea { position:relative; top:20px; height:51px; font-size: 12px; width:99%; margin:5px; } #divTable { position:relative; width:99%; margin:5px auto; overflow-x:scroll; } </style> <title>TEST TEST</title> </head> <body id="divBody"> <div id="divContainer" class="gridRegion"> <div id="divTopFieldSet"> <fieldset style="margin: 5px;"> <legend style="font-size: 12px; color: #000;">Numbers</legend> <div id="divTable"> <table border="1px"> <tr> <td>One </td> <td>Two </td> <td>Three </td> <td>Fout </td> <td>Five </td> <td>Six </td> <td>Seven </td> <td>Eight </td> <td>Nine </td> <td>Ten </td> <td>Eleven </td> <td>Twelve </td> <td>Thirteen </td> <td>Fourteen </td> <td>Fifteen </td> <td>Sixteen </td> <td>Seventeen </td> <td>Eighteen </td> <td>Nineteen </td> <td>Twenty </td> </tr> </table> </div> </fieldset> </div> <div id="divRadioButtonArea"> <fieldset style=" padding-left: 5px;"> <legend style="color: #000; height:auto">Colors</legend> <table style="width:100%;padding-left:5%;padding-right:5%;"> <tr> <td> <input type="radio" name="A" value="Y"/><label>Red</label> </td> <td> <input type="radio" name="O" value="O"/><label>White</label> </td> <td> <input type="radio" name="W"/><label>Blue</label> </td> </tr> </table> </fieldset> </div> </div> </body> </html>

    Read the article

  • Pasting formatted Excel range into Outlook message

    - by Steph
    Hi everyone, I am using Office 2007 and I would like to use VBA to paste a range of formatted Excel cells into an Outlook message and then mail the message. In the following code (that I lifted from various sources), it runs without error and then sends an empty message... the paste does not work. Can anyone see the problem and better yet, help with a solution? Thanks, -Steph Sub SendMessage(SubjectText As String, Importance As OlImportance) Dim objOutlook As Outlook.Application Dim objOutlookMsg As Outlook.MailItem Dim objOutlookRecip As Outlook.Recipient Dim objOutlookAttach As Outlook.Attachment Dim iAddr As Integer, Col As Integer, SendLink As Boolean 'Dim Doc As Word.Document, wdRn As Word.Range Dim Doc As Object, wdRn As Object ' Create the Outlook session. Set objOutlook = CreateObject("Outlook.Application") ' Create the message. Set objOutlookMsg = objOutlook.CreateItem(olMailItem) Set Doc = objOutlookMsg.GetInspector.WordEditor 'Set Doc = objOutlookMsg.ActiveInspector.WordEditor Set wdRn = Doc.Range wdRn.Paste Set objOutlookRecip = objOutlookMsg.Recipients.Add("[email protected]") objOutlookRecip.Type = 1 objOutlookMsg.Subject = SubjectText objOutlookMsg.Importance = Importance With objOutlookMsg For Each objOutlookRecip In .Recipients objOutlookRecip.Resolve ' Set the Subject, Body, and Importance of the message. '.Subject = "Coverage Requests" 'objDrafts.GetFromClipboard Next .Send End With Set objOutlookMsg = Nothing Set objOutlook = Nothing End Sub

    Read the article

  • Why would Java classloading fail on Linux, but succeed on Windows?

    - by arnsholt
    I've got a Java web application (using Spring), deployed with Jetty. If I try to run it on a Windows machine everything works as expected, but if I try to run the same code on my Linux machine, it fails like this: [normal startup output] 11:16:39.657 INFO [main] org.mortbay.jetty.servlet.ServletHandler$Context.log(ServletHandler.java:1145) 16 Set web app root system property: 'webapp.root' = [/path/to/working/dir] java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.mortbay.start.Main.invokeMain(Main.java:151) at org.mortbay.start.Main.start(Main.java:476) at org.mortbay.start.Main.main(Main.java:94) Caused by: java.lang.ExceptionInInitializerError at org.springframework.web.util.Log4jWebConfigurer.initLogging(Log4jWebConfigurer.java:129) at org.springframework.web.util.Log4jConfigListener.contextInitialized(Log4jConfigListener.java:51) at org.mortbay.jetty.servlet.WebApplicationContext.doStart(WebApplicationContext.java:495) at org.mortbay.util.Container.start(Container.java:72) at org.mortbay.http.HttpServer.doStart(HttpServer.java:708) at org.mortbay.util.Container.start(Container.java:72) at org.mortbay.jetty.Server.main(Server.java:460) ... 7 more Caused by: org.apache.commons.logging.LogConfigurationException: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@15311bd for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category) (Caused by org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@15311bd for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category)) at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:543) at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235) at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:209) at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351) at org.springframework.util.SystemPropertyUtils.(SystemPropertyUtils.java:42) ... 14 more Caused by: org.apache.commons.logging.LogConfigurationException: No suitable Log constructor [Ljava.lang.Class;@15311bd for org.apache.commons.logging.impl.Log4JLogger (Caused by java.lang.NoClassDefFoundError: org/apache/log4j/Category) at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:413) at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529) ... 18 more Caused by: java.lang.NoClassDefFoundError: org/apache/log4j/Category at java.lang.Class.getDeclaredConstructors0(Native Method) at java.lang.Class.privateGetDeclaredConstructors(Class.java:2389) at java.lang.Class.getConstructor0(Class.java:2699) at java.lang.Class.getConstructor(Class.java:1657) at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:410) ... 19 more Caused by: java.lang.ClassNotFoundException: org.apache.log4j.Category at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 24 more [shutdown output] I've run the app with java -verbose:class, and according to that output, org.apache.log4j.Category is loaded from the log4j JAR in my /WEB-INF/lib, just before the first exception is thrown. Now, the Java versions on the two machines are slightly different. Both the machines have Sun's java, the Linux machine has 1.6.0_10, while the Windows machine has 1.6.0_08, or maybe 07 or 06, I can't remember the exact number right now, and don't have the machine at hand. But even though the minor versions of the Javas are slightly different, the code shouldn't break like this. Does anyone understand what's wrong here?

    Read the article

  • Chaining IQueryables together

    - by Matt Greer
    I have a RIA Services based app that is using Entity Framework on the server side (possibly not relevant). In my real app, I can do something like this. EntityQuery<Status> query = statusContext.GetStatusesQuery().Where(s => s.Description.Contains("Foo")); Where statusContext is the client side subclass of DomainContext that RIA Services was kind enough to generate for me. The end result is an EntityQuery<Status> object who's Query property is an object that implements IQueryable and represents my where clause. The WebDomainClient is able to take this EntityQuery and not just give me back all of my Statuses but also filtered with my where clause. I am trying to implement this in a mock DomainClient. This MockDomainClient accepts an IQueryably<Entity> which it returns when asked for. But what if the user makes the query and includes the ad hoc additional query? How can I merge the two together? My MockDomainClient is (this is modeled after this blog post) ... public class MockDomainClient : LocalDomainClient { private IQueryable<Entity> _entities; public MockDomainClient(IQueryable<Entity> entities) { _entities = entities; } public override IQueryable<Entity> DoQuery(EntityQuery query) { if (query.Query == null) { return _entities; } // otherwise want the union of _entities and query.Query, query.Query is IQueryable // the below does not work and was a total shot in the dark: //return _entities.Union(query.Query.Cast<Entity>()); } } public abstract class LocalDomainClient : System.ServiceModel.DomainServices.Client.DomainClient { private SynchronizationContext _syncContext; protected LocalDomainClient() { _syncContext = SynchronizationContext.Current; } ... public abstract IQueryable<Entity> DoQuery(EntityQuery query); protected override IAsyncResult BeginQueryCore(EntityQuery query, AsyncCallback callback, object userState) { IQueryable<Entity> localQuery = DoQuery(query); LocalAsyncResult asyncResult = new LocalAsyncResult(callback, userState, localQuery); _syncContext.Post(o => (o as LocalAsyncResult).Complete(), asyncResult); return asyncResult; } ... }

    Read the article

  • jQuery Drag/Drop problem: mousemove Event not binding for some elements

    - by saturdayplace
    Using the latest jQuery/UI that are hosted at Google. I've got the following markup: <ul id="tree"> <li><a href="1/">One</a></li> <li><a href="2/">Two</a></li> </ul> And the following javascript: $(document).ready(function(){ // Droppable callbacks function dragOver(overEvent, ui_object) { $(this).mousemove(function(moveEvent){ console.log("moved over", this); }); } function drop_deactivate() { $(this).unbind(); } function drag_out() { $(this).unbind(); } // Actual dragging $("#treeContainer li").draggable({ revert: true, revertDuration: 0 }); // Actuall dropping $("a").droppable({ tolerance: "pointer", over: dragOver, deactivate: drop_deactivate, out: drag_out }); }); If I drag the first li down over the second, the mousemove function fires (and firebug logs the output). But if I drag the second li up over the first, the mousemove function doesn't fire. You can see this live at http://jsbin.com/ivala. Is there a reason for this? Should I be trapping the mousemove event in some other way? Edit: It appears as thought the mousemove() event isn't binding for earlier elements than the one currently being dragged (should be bound upon their mouseover).

    Read the article

  • Vs2010 MvcBuildViews Not firing

    - by Maslow
    This project in Vs2008 targeting .net 3.5 used to compile views. Vs2010 Targeting .net 4.0 the following view code is not picked up as an error, and I have not found anyway to listen to the mvcBuildview trace/debug output: <%{ %> A completely unmatched code block declaration is not being picked up, neither was a partial view inheriting from a non existent namespace/class. <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'DebugWithBuildViews|AnyCPU' "> <!--<BaseIntermediateOutputPath>bin/intermediate</BaseIntermediateOutputPath>--> <!--<MvcBuildViews Condition=" '$(Configuration)' == 'DebugWithBuildViews' ">true</MvcBuildViews>--> <EnableUpdateable>false</EnableUpdateable> <MvcBuildViews>true</MvcBuildViews> <DebugSymbols>true</DebugSymbols> <OutputPath>bin</OutputPath> <DefineConstants>DEBUG;TRACE</DefineConstants> <DebugType>full</DebugType> <PlatformTarget>AnyCPU</PlatformTarget> <CodeAnalysisUseTypeNameInSuppression>true</CodeAnalysisUseTypeNameInSuppression> <CodeAnalysisModuleSuppressionsFile>GlobalSuppressions.cs</CodeAnalysisModuleSuppressionsFile> <ErrorReport>prompt</ErrorReport> <CodeAnalysisRuleSet>AllRules.ruleset</CodeAnalysisRuleSet> <RunCodeAnalysis>true</RunCodeAnalysis> </PropertyGroup> My BeforeBuild: <Target Name="BeforeBuild"> <WriteLinesToFile File="$(OutputPath)\env.config" Lines="$(Configuration)" Overwrite="true"> </WriteLinesToFile> My AfterBuild: <Target Name="AfterBuild" Condition="'$(MvcBuildViews)'=='true'"> <!--<BaseIntermediateOutputPath>[SomeKnownLocationIHaveAccessTo]</BaseIntermediateOutputPath>--> <Message Importance="high" Text="Precompiling views" /> <!--<AspNetCompiler VirtualPath="temp" PhysicalPath="$(ProjectDir)..\$(ProjectName)" />--> <!--<AspNetCompiler VirtualPath="temp" />--> <!--PhysicalPath="$(ProjectDir)\..\$(ProjectName)"--> I know the MvcBuildViews property is true because the Precompiling views message comes through. The compile is a success but it does not catch the view compilation errors. I have Vs2010 ultimate, vs 2008 developer+database edition on this machine. So either it compiles ignoring the errors with some combinations of the fixes I've tried, or it errors with Error 410 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. web.config 100 The commented out sections are things I have tried Previously I have tried the fixes from these posts: Compile Views in Asp.net Mvc AllowDefinitionMachinetoApplicationError MvcBuildviews Issue Turning on MVC Build Views in 2010 TFS Johnny Coder

    Read the article

  • Gmail IMAP OAuth for desktop clients

    - by Sabya
    Recently Google announced that they are supporting OAUth for Gmail IMAP/SMTP. I browsed through their multiple documentations, but still I am confused about if they support OAuth for installed applications. 1. In this documentation they say: Note: Though the OAuth protocol supports the desktop/installed application use case, Google only supports OAuth for web applications. But they also have a document for OAuth for installed applications. 2. When I read the OAuth specification pointed by them, it says (in section 11.7): In many applications, the Consumer application will be under the control of potentially untrusted parties. For example, if the Consumer is a freely available desktop application, an attacker may be able to download a copy for analysis. In such cases, attackers will be able to recover the Consumer Secret used to authenticate the Consumer to the Service Provider. Also I think the disclaimer in point 1 above is about Google Data APIs, and surely IMAP/SMTP is not a part of them. I understand that for installed applications I can have a setup like: Have a small web-app at say example.com for my application. This web-app talks to Google gets the access token. The installed application talks to example.com only to get the access token. Installed application then talks to Google with the access token. I am now confused. Is this the only way?

    Read the article

  • iPhone Key-Value Observer: observer not registering in UITableViewController

    - by Scott
    Hi Fellow iPhone Developers, I am an experienced software engineer but new to the iPhone platform. I have successfully implemented sub-classed view controllers and can push and pop parent/child views on the view controller stack. However, I have struck trouble while trying to update a view controller when an object is edited in a child view controller. After much failed experimentation, I discovered the key-value observer API which looked like the perfect way to do this. I then registered an observer in my main/parent view controller, and in the observer I intend to reload the view. The idea is that when the object is edited in the child view controller, this will be fired. However, I think that the observer is not being registered, because I know that the value is being updated in the editing view controller (I can see it in the debugger), but the observing method is never being called. Please help! Code snippets follow below. Object being observed. I believe that this is key-value compliant as the value is set when called with the setvalue message (see Child View Controller below). X.h: @interface X : NSObject <NSCoding> { NSString *name; ... @property (nonatomic, retain) NSString *name; X.m: @implementation X @synthesize name; ... Main View Controller.h: @class X; @interface XViewController : UITableViewController { X *x; ... Main View Controller.m: @implementation XViewController @synthesize x; ... - (void)viewDidLoad { ... [self.x addObserver:self forKeyPath: @"name" options: (NSKeyValueObservingOptionNew | NSKeyValueObservingOptionOld) context:nil]; [super viewDidLoad]; } ... - (void)observeValueForKeyPath:(NSString *)keyPath ofObject:(id)object change:(NSDictionary *)change context:(void *)context { if ([keyPath isEqual:@"name"]) { NSLog(@"Found change to X"); [self.tableView reloadData]; } [super observeValueForKeyPath:keyPath ofObject:object change:change context:context]; } Child View Controller.m: (this correctly sets the value in the object in the child view controller) [self.x setValue:[[tempValues objectForKey:key] text] forKey:@"name"];

    Read the article

  • Jquery image preview plugin issue...

    - by Pandiya Chendur
    I have a problem with an image preview that comes up when you hover over a thumbnail. I can change the distance between the preview and the cursor, but if a thumbnail is close to the side of the window, the preview cant fit and you only see part of it.. hope that makes sense... is there a way to make it so that if the preview doesnt fit, it will show up on the other side of the cursor?.... Here is the script... this.imagePreview = function() { /* CONFIG */ xOffset = 10; yOffset = 30; // these 2 variable determine popup's distance from the cursor // you might want to adjust to get the right result /* END CONFIG */ $("a.preview").hover(function(e) { this.t = this.title; this.title = ""; var c = (this.t != "") ? "<br/>" + this.t : ""; $("body").append("<p id='preview'> <img src='" + this.href + "' alt='Image preview' />" + c + "</p>"); $("#preview") .css("top", (e.pageY - xOffset) + "px") .css("left", (e.pageX + yOffset) + "px") .fadeIn("slow"); }, function() { this.title = this.t; $("#preview").remove(); }); $("a.preview").mousemove(function(e) { $("#preview") .css("top", (e.pageY - xOffset) + "px") .css("left", (e.pageX + yOffset) + "px"); }); }; // starting the script on page load $(document).ready(function() { imagePreview(); }); EDIT: see what i am getting, http://img202.imageshack.us/img202/4991/browserpreviewf.jpg my image at the right corner of the page so when i hover the img my preview goes even further right that is besides the page scrollbar half the preview is available.... How to get the preview to the left of the cursor..

    Read the article

  • ASP.NET MVC2: Client-side validation not working with Start.js

    - by Shaggy13spe
    Ok, this is strange. I would hope it's something I'm doing wrong and not that MS has two technologies that simply don't work together. (UPDATE: See bottom of post for Script tag order in HEAD section) I'm trying to use the dataView template and client-side validation. If I include a reference to: <script src="http://ajax.microsoft.com/ajax/beta/0911/Start.js" type="text/javascript"></script> by itself, the dataview template works fine. but if I put in the following references: <script src="http://ajax.microsoft.com/ajax/jquery.validate/1.7/jquery.validate.min.js" type="text/javascript"></script> <script src="../../Scripts/MicrosoftAjax.js" type="text/javascript"></script> <script src="../../Scripts/MicrosoftMvcAjax.js" type="text/javascript"></script> <script src="../../Scripts/MicrosoftMvcValidation.js" type="text/javascript"></script> then I get the following error: > Error: Type._registerScript is not a > function Source File: > http://ajax.microsoft.com/ajax/beta/0911/MicrosoftAjaxTemplates.js > Line: 1 and: > Error: Sys.get("$listings") is null > Source File: > http://localhost:12370/Listings Line: > 76 Here's the code calling the dataview: $(document).ready(function () { LoadMap(); Sys.require([Sys.components.dataView, Sys.scripts.jQuery], function() { $("#listings").dataView(); Sys.get("$listings").set_data(listings.Data); updateMap(listings.Data); }); }); I would really appreciate any help with this one. Thanks! UPDATE: I've tried moving around the order of the last 4 script tags, but to no avail.

    Read the article

  • jQuery.width() & DOM refresh

    - by o_O Tync
    My script dynamically creates a <ul> width left-floating <li>s inside: it's a paginator. Afterwards, the script measures width of all <li>s and summs them up. The problem is that after the nodes are injected into the document — the browser refreshed DOM and applies CSS styles which takes a while. It has a negative effect on my script: when these operations are not complete before I measure the width — my script gets a wrong value. If I perform the measure in a second — everything is ok. The thing I'm looking for is a way to detect the moment when the <ul> is fully drawn, styles applied and the width has stabilizes. Or at least a way to detect every dimensions changes. If there's a way to detect width stabilization — I would do the measuring right after it to get the correct values. P.S. Why I need this. My paginator's left-floating <li> items tend to move to the next line when the <ul> tries to become wider than the page itself. Even though most of <li>s are invisible because of parent <div>'s width restriction: div { width: 500px; overflow: hidden; } div ul { width: 100%; white-space: nowrap; } div ul li { display: block; float: left; } they still go down unless I specify the actual summed width of the <ul> with the script.

    Read the article

  • Memory management in ObjC/iPhone

    - by Manu
    Hi, I have question in memory management (objective C). There are two ideal scenario. ============================= scenario 1 ======================================== (void) funcA { MyObj *c = [otherObj getMyObject]; [c release]; } -(MyObj *) getMyObject //(this method is available in other OtherObj.m file) { MyObj *temp = [[MyObj alloc] init]; // do smothing here return temp; } ============================= scenario 2 ======================================== (void) funcA { MyObj *c = [otherObj getMyObject]; } -(MyObj *) getMyObject //(this method is available in other OtherObj.m file) { MyObj *temp = [[myObj alloc] init]; // do smothing here return [temp autorelease]; } myObj is holding huge chunk of data. In first scenario I am getting myObj(allocated) from other file so I have to release in my own method. (as per any C/C++ language library ,like strdup will return string duplicate which will realase later by developer not by strdup method). In second scenario I am getting myObj(allocated) from otherObj.m file so otherObj.m file is responsible to release that allocated memory(mean autorelease)? Is it right? Please let me know Which scenario is more efficient and valid as per apple memory guidelines. Please Please don't show me any document link. Thanks Manu

    Read the article

  • Stop event bubbling in Javascript

    - by Kartik Rao
    I have a html structure like : <div onmouseover="enable_dropdown(1);" onmouseout="disable_dropdown(1);"> My Groups <a href="#">(view all)</a> <ul> <li><strong>Group Name 1</strong></li> <li><strong>Longer Group Name 2</strong></li> <li><strong>Longer Group Name 3</strong></li> </ul> <hr /> Featured Groups <a href="#">(view all)</a> <ul> <li><strong>Group Name 1</strong></li> <li><strong>Longer Group Name 2</strong></li> <li><strong>Longer Group Name 3</strong></li> </ul> </div> I want the onmouseout event to be triggered only from the main div, not the 'a' or 'ul' or 'li' tags within the div! My onmouseout function is as follows : function disable_dropdown(d) { document.getElementById(d).style.visibility = "hidden"; } Can someone please tell me how I can stop the event from bubbling up? I tried the solutions (stopPropogation etc) provided on other sites, but I'm not sure how to implement them in this context. Any help will be appreciated. Thanks a lot!

    Read the article

  • docs/examples on libxml2 type system?

    - by Wang
    I'm reading through the libxml2 API and examples on xmlsoft.com and having some real difficulty wrapping my head around the type system. For example, the _xmlAttribute struct has an xmlChar* field called name. This obviously refers to the name of the attribute (e.g., "bar" for the struct tied to the element <foo bar='baz' />). The _xmlAttribute struct also has a field called value, which I would expect to be "baz", except the type is xmlNodePtr. Um, what? I guess I could write up some test code and examine the memory in gdb, but there has to be an easier way. Has anyone written up examples of the data structures generated by a libxml2 parser? I'm looking for an English prose text, not generated documentation, that will walk me through the various types and the values they take when parsing some example bit of XML. Bonus points if it presents only the subset of libxml2 needed to read and write a config file---no namespaces or XPath or even modifying an existing document, just parse some XML, access the data, and then write it out again.

    Read the article

  • how to show a large jpg image to the right in jqGrid's edit form ?

    - by cLee
    Is it possible to show a large (i.e. bigger than a thumbnail) jpeg image in the right-hand side of jqGrid's edit form ? Users want to look at a photo while entering data into fields ... they are describing things in the photo. I'm sure all things are possible with jQuery, but I don't know where to begin. thanks ... html: function afterSubmit(r, data, action) { // if session timeout returned: if (r.responseText == "logout") { window.location = '../scripts/logout.php'; } // if an error message is returned: if (r.responseText != "") { $('#submit_errors').html('Alert:'+r.responseText+''); // show div with error message $('#submit_errors').slideDown(); // hide error div after 10 seconds window.setTimeout(function() { $('#submit_errors').slideUp(); }, 10000); return false; // don't remove this! } return true; // don't remove this! } var lastsel; jQuery(document).ready(function(){ var mygrid = jQuery("#mobile_incidents").jqGrid({ url:'list.php?q=e', editurl:'edit.php', datatype: "json", // note: all column names are required even though some columns are hidden colNames:['Rec#','Date','Line','Photo'], colModel:[{ name:'id', index:'id', editable:true, editoptions: {readonly:'readonly'} }, { name:'mobile_discoveryDate', index:'mobile_discoveryDate', sortable:false, editable:true, edittype:'text', formatter:'date', formatoptions:{ srcformat:'Y/m/d', newformat:'m/d/Y' }, editoptions:{ size:12, maxlength:10, dataInit: function(element) { $(element).blur(); $(element).datepicker({dateFormat:'mm/dd/yyyy'}) } } }, { name:'mobile_lineName', index:'mobile_lineName', editable:true, sortable:false}, { name:'mobile_photo_name', index:'mobile_photo_name', editable:false, sortable:false} ], pager: '#mobile_incidents_pager', altRows: false, rowNum:10, rowList:[10,20], imgpath: '../include/images/jqgrid', viewrecords: true, emptyrecords:'No submissions found!', height: 260, sortname: 'id', sortorder: 'desc', gridview: true, scrollrows: true, autowidth: true, rownumbers: false, multiselect: false, subGrid:false, caption: '' }) .navGrid('#mobile_incidents_pager', // params: {add:false, edit:true, del:false, search:false, view:false, refresh:true, alertcap:' to edit:', alerttext:' . . . click on a row to highlight' }, // edit params: {top:50, left:5, editCaption: 'Edit Submission', bSubmit: 'Approve/Save', closeAfterEdit:true, afterSubmit:function(r,data){return afterSubmit(r,data,'edit');} }, {}, // add params {}, // delete params // search params: {multipleSearch: false}, // view params: {top: 150, left: 5, caption: 'View Mobile Rail Submission'} ); });

    Read the article

  • UIWebView leak? Can someone confirm?

    - by Shaggy Frog
    I was leak-testing my current project and I'm stumped. I've been browsing like crazy and tried everything except chicken sacrifice. I just created a tiny toy project app from scratch and I can duplicate the leak in there. So either UIWebView has a leak or I'm doing something really silly. Essentially, it boils down to a loadRequest: call to a UIWebView object, given an URLRequest built from an NSURL which references a file URL, for a file in the app bundle, which lives inside a folder that Xcode is including by reference. Phew. The leak is intermittent but still happens ~75% of the time (in about 20 tests it happened about 15 times). It only happens on the device -- this does not leak in the simulator. I am testing targeting both iPhone OS 3.1.2 and 3.1.3, on an original (1st Gen) iPod Touch that is using iPhone OS 3.1.3. To reproduce, just create a project from scratch. Add a UIWebView to the RootViewController's .xib, hook it up via IBOutlet. In the Finder, create a folder named "html" inside your project's folder. Inside that folder, create a file named "dummy.html" that has the word "Test" in it. (Does not need to be valid HTML.) Then add the html folder to your project in Xcode by choosing "Create Folder References for any added folders" Add the following to viewDidLoad NSString* resourcePath = [[NSBundle mainBundle] resourcePath]; NSString* filePath = [[resourcePath stringByAppendingPathComponent:@"html"] stringByAppendingPathComponent:@"dummy.html"]; NSURL* url = [[NSURL alloc] initFileURLWithPath:filePath]; NSURLRequest* request = [NSURLRequest requestWithURL:url]; // <-- this creates the leak! [browserView loadRequest:request]; [url release]; I've tried everything from setting delegate for the UIWebView and implementing UIWebViewDelegate, to not setting a delegate in IB, to not setting a delegate in IB and explicitly setting the web view's delegate property to nil, to using alloc/init instead of getting autoreleased NSURLRequests (and/or NSURLs)... I tried the answer to a similar question (setting the shared URL cache to empty) and that did not help. Can anyone help?

    Read the article

  • Azure storage: Uploaded files with size zero bytes

    - by Fabio Milheiro
    When I upload an image file to a blob, the image is uploaded apparently successfully (no errors). When I go to cloud storage studio, the file is there, but with a size of 0 (zero) bytes. The following is the code that I am using: // These two methods belong to the ContentService class used to upload // files in the storage. public void SetContent(HttpPostedFileBase file, string filename, bool overwrite) { CloudBlobContainer blobContainer = GetContainer(); var blob = blobContainer.GetBlobReference(filename); if (file != null) { blob.Properties.ContentType = file.ContentType; blob.UploadFromStream(file.InputStream); } else { blob.Properties.ContentType = "application/octet-stream"; blob.UploadByteArray(new byte[1]); } } public string UploadFile(HttpPostedFileBase file, string uploadPath) { if (file.ContentLength == 0) { return null; } string filename; int indexBar = file.FileName.LastIndexOf('\\'); if (indexBar > -1) { filename = DateTime.UtcNow.Ticks + file.FileName.Substring(indexBar + 1); } else { filename = DateTime.UtcNow.Ticks + file.FileName; } ContentService.Instance.SetContent(file, Helper.CombinePath(uploadPath, filename), true); return filename; } // The above code is called by this code. HttpPostedFileBase newFile = Request.Files["newFile"] as HttpPostedFileBase; ContentService service = new ContentService(); blog.Image = service.UploadFile(newFile, string.Format("{0}{1}", Constants.Paths.BlogImages, blog.RowKey)); Before the image file is uploaded to the storage, the Property InputStream from the HttpPostedFileBase appears to be fine (the size of the of image corresponds to what is expected! And no exceptions are thrown). And the really strange thing is that this works perfectly in other cases (uploading Power Points or even other images from the Worker role). The code that calls the SetContent method seems to be exactly the same and file seems to be correct since a new file with zero bytes is created at the correct location. Does any one have any suggestion please? I debugged this code dozens of times and I cannot see the problem. Any suggestions are welcome! Thanks

    Read the article

  • MSWord automation:Get file contents after it was saved

    - by BlackTigerX
    I have an application that uses MSWord automation to edit some documents, after they save and close word I need to grab the modified file and put it back on the repository, there is only one scenario where I can't get it to work and that is when the user makes changes to the file, selects to close word and selects yes to save the file there are 2 events that I'm using: DocumentBeforeSave Quit on the Quit event I'm trying to load the .docx file from disk but on this particular scenario I get an IOException because the file is still in use, somehow I need to wait until after the Quit event has been processed, which is when Word is actually closed and the file is no longer being used right now I have it working using this word.Visible = true; while (!wordDone) { //gets changed to true on the Quit event System.Threading.Thread.Sleep(100); } bool error = false; do { try { //need to load the contents of the modified file ls.Content = System.IO.File.ReadAllBytes(provider.GetFileName()); error = false; } catch (System.IO.IOException) { error = true; System.Threading.Thread.Sleep(200); } } while (error); while this works it is very ugly, I need a way to fire an event after the Quit event has been handled, or block the current thread while word is still running, or get an event after the document has been saved, the bottom line is I need a clean way to load the file after it has been saved and word is closed. DocumentAfterSave would be awesome, but doesn't seem to exist. I Also tried unhooking the Quit handler and calling word.Quit on the Quit handler, that made no difference

    Read the article

< Previous Page | 823 824 825 826 827 828 829 830 831 832 833 834  | Next Page >