Search Results

Search found 2730 results on 110 pages for 'jonathan prior'.

Page 83/110 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

    - by Biohazard
    I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

    Read the article

  • problem transferring Win 7 operating system hard drive to be used as external hard drive

    - by itserich
    Win 7 Asus MA479 8GB Ram hard drives are 500GB The operating system was a Caviar Green, and I tried to exchange it for a Caviar Blue. The Caviar Blue took the install correctly, but the Green, the prior operating system hard drive, will not allow itself to be used as an external hard drive. I use TrueCrypt and tried to format the Green and it freezes each time at the very end of the encyrption of the partition. I took the Blue out of the system and tried to encrypt it, and same problem. I think there must be something on the hard drive that shows it was a system drive and it causes a conflict. I have tried writing over the system hard drive to fully erase everything but that does not work, it still freezes. The drives will work in a different pc, i.e. other pc where it never was the system drive. The external hard drive is connected esata through Thermaltake. I have used TrueCrypt on various pc's for years including this Win7 with no problem. Thank you.

    Read the article

  • iptables drops some packets on port 80 and i don't know the cause.

    - by Janning
    Hi, We are running a firewall with iptables on our Debian Lenny system. I show you only the relevant entries of our firewall. Chain INPUT (policy DROP 0 packets, 0 bytes) target prot opt in out source destination ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 state NEW Chain OUTPUT (policy DROP 0 packets, 0 bytes) target prot opt in out source destination ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED LOGDROP all -- * * 0.0.0.0/0 0.0.0.0/0 Some packets get dropped each day with log messages like this: Feb 5 15:11:02 host1 kernel: [104332.409003] dropped IN= OUT=eth0 SRC= DST= LEN=1420 TOS=0x00 PREC=0x00 TTL=64 ID=18576 DF PROTO=TCP SPT=80 DPT=59327 WINDOW=54 RES=0x00 ACK URGP=0 for privacy reasons I replaced IP Addresses with and This is no reason for any concern, but I just want to understand what's happening. The web server tries to send a packet to the client, but the firewall somehow came to the conclusion that this packet is "UNRELATED" to any prior traffic. I have set a kernel parameter ip_conntrack_ma to a high enough value to be sure to get all connections tracked by iptables state module: sysctl -w net.ipv4.netfilter.ip_conntrack_max=524288 What's funny about that is I get one connection drop every 20 minutes: 06:34:54 droppedIN= 06:52:10 droppedIN= 07:10:48 droppedIN= 07:30:55 droppedIN= 07:51:29 droppedIN= 08:10:47 droppedIN= 08:31:00 droppedIN= 08:50:52 droppedIN= 09:10:50 droppedIN= 09:30:52 droppedIN= 09:50:49 droppedIN= 10:11:00 droppedIN= 10:30:50 droppedIN= 10:50:56 droppedIN= 11:10:53 droppedIN= 11:31:00 droppedIN= 11:50:49 droppedIN= 12:10:49 droppedIN= 12:30:50 droppedIN= 12:50:51 droppedIN= 13:10:49 droppedIN= 13:30:57 droppedIN= 13:51:01 droppedIN= 14:11:12 droppedIN= 14:31:32 droppedIN= 14:50:59 droppedIN= 15:11:02 droppedIN= That's from today, but on other days it looks like this, too (sometimes the rate varies). What might be the reason? Any help is greatly appreciated. kind regards Janning

    Read the article

  • ASUS laptop doesn't charge/use the battery after reinstalling Windows 7

    - by Stan
    I've done a clean install of Windows 7 x64 on an ASUS X501A laptop. The battery is detected and shows in the system tray as "plugged in, charging". However the charge level stays at 76% and if the AC cord is plugged out the laptop turns off. The laptop does not turn on without being plugged in either. Everything worked perfectly prior to reinstall. I've tried: Downloading and installing all the ASUS drivers, including the ATK ACPI driver Checking the BIOS - there do not seem to be any battery-related settings Flashing the BIOS to the latest version Uninstalling Microsoft ACPI-Compliant Control Method Battery in device manager as suggested on the internet Full power discharge/ATX reset as suggested by ASUS support: remove mains power charger, remove battery, press and hold power button for 10 seconds, reconnect battery and mains and turn on I have a feeling all this may have something to do with the EFI BIOS that comes on the laptop. During the reinstall I had to delete all partitions and start anew, because the Windows installer complained about the improper order of GPT partitions. The EFI System Partition was recreated by the installer, and I am guessing that it may be missing the particular ACPI driver needed to make the battery work. I've tried researching this, but could not come up with any useful info. I am hoping someone here may know a bit more about this and maybe help me understand what's going on and how to fix it. Barring that, I'll have to re-image the drive off an identical ASUS laptop with stock install and hope it fixes things.

    Read the article

  • Remote Desktop Services Licensing - Does server have to have a RDS role?

    - by transistor1
    I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

    Read the article

  • ms excel 2010 in windows xp - when open workbook the data is formatted differently than when i saved it

    - by Justin
    I haven't been able to find an answer to this. I have multiple files that I use regularly in excel that now have cell formats of "date". Every single cell in the entire workbook (all sheets) is now formatted as "date". The problem is that I lost my formatting for percents, numbers years, etc and now everything is converted to date (xx/xx/xxxx). I am able to open previously saved versions of a file (prior to me having the problem) and the cells are formatted as I intend them to be (percents, numbers, general, as well as dates). Since this has happened on a couple different files recently, I am wondering how this is happening and how do I prevent it from happening in the future. I cannot cure the problem just by highlighting the entire sheet and converting back to general because I lose all my percents and number formatting. Example (Correct formatting): Month Year Working Days MTD POS Curr Rem May 2012 22 0 1,553,549 June 2012 22 0 1,516,903 June 2011 22 0 1,555,512 June 2010 22 0 1,584,704 Example (Incorrect formatting): Month Year Working Days MTD POS Curr Rem June Tuesday, July 04, 1905 Wednesday, January 04, 1900 Wednesday, January 18, 1900 213,320 July Tuesday, July 04, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 314,261 July Monday, July 03, 1905 Wednesday, January 04, 1900 Sunday, January 15, 1900 447,759 July Sunday, July 02, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 321,952 Sorry for the mess. Any suggestions?

    Read the article

  • Packet flooding while configuring a Debian L2TP/IPSec client?

    - by Joseph B.
    I'm currently at my wits end trying to configure an L2TP over IPSec VPN connection on my Debian using openswan and xl2tp box connecting to a server of unknown configuration. I've managed to successfully establish the connection and everything appears to be working well until I attempt to set the VPN connection as my default route, at which point I see a massive flood of packets simultaneously being transmitted (on the tune of ~1.5 GB in about 2min) until the server drops my connection. Prior to this network traffic on all my interfaces is minimal. According to iftop the majority of this traffic appears to be coming out of port 12, although I can't seem to figure out how to finger a specific process. If I instead just route traffic destined for 74.0.0.0/8 through it I'm able to access Google's servers through the VPN without issue. My xl2tp.conf file is: [lac vpn-nl] lns = example.vpn.com name = myusername pppoptfile = /etc/ppp/options.l2tpd.client My options.l2tpd.client file is: ipcp-accept-local ipcp-accept-remote refuse-eap require-mschap-v2 noccp noauth idle 1800 mtu 1410 mru 1410 usepeerdns lock name myusername password mypassword connect-delay 5000 And my routing table looks like: Destination Gateway Genmask Flags Metric Ref Use Iface 10.5.2.1 * 255.255.255.255 UH 0 0 0 ppp0 10.0.50.0 * 255.255.255.0 U 0 0 0 eth0 10.50.0.0 * 255.255.0.0 U 0 0 0 eth0 10.0.0.0 * 255.255.0.0 U 0 0 0 eth0 192.168.0.0 * 255.255.0.0 U 0 0 0 eth0 loopback * 255.0.0.0 U 0 0 0 lo default * 0.0.0.0 U 0 0 0 ppp0 I'm seeing absolutely nothing in auth.log and syslog during this time and can't seem to find any other log files it might be writing to. Any suggestions would be appreciated!

    Read the article

  • Apache and Virtual Hosts Problem on OS X

    - by Charles Chadwick
    I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

    Read the article

  • Bizarre client IP switch-up on VPN

    - by B. VB.
    Let A.B.C.D be the public IP of my VPN server. Let W.X.Y.Z be the IP of the client before it connects to the VPN. My VPN server's IP address on the LAN in 10.8.0.1, and the client is 10.8.0.6. I also run a webserver on the same machine hosting the VPN. On it is a simple webpage that performs the exact same thing as whatismyip.org (i.e., simply prints the IP of the requester) Let me illustrate the scenario for you. In a Chrome window I have three tabs, what I have in parenthesis is the URL: Tab 1 (http://whatismyip.org): A.B.C.D This is what I expect to see. It's the public IP of the VPN server. Tab 2 (http://10.8.0.1): 10.8.0.6 ok, looks expected. They are behind the same LAN now. Tab 3 (http://A.B.C.D) W.X.Y.Z WTF?? Basically, if I access the webserver while tunneled, in shows the IP address of my machine PRIOR to tunelling! Remember, tab2 and tab3 are the same webpage. Why does Tab3 not show the client IP as it's own IP (i.e., show A.B.C.D)??? I hope this question is clear, thanks in advance!

    Read the article

  • Losing SQL connections

    - by john pavelka
    sql servr 2005 - Standard; one dedicated sql server (VM); windows server 2003; Small databases; About once a week we lose all sql connections. It seems to fix itself after about 5-10 minutes. System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. We don't have a fully qualified DBA; it's kind of a joint effort here. Can somebody give me some general ideas for troubleshooting the network side and the application side? We already ran a few tuning profiles and ran through Database Tuning Advisor to apply indexing recommendations. It would sure be nice if there was a way to take a snapshot of what was running on sql server when these 100% cpu spikes occured, but sometimes we're not around. Is it common to throttle CPU for certain processes? Can this be done with Windows server 2003? For example, if security apps were making cpu spike to 100%, is there a way to limit their cpu usage? Any advice is appreciated. thanks,

    Read the article

  • sendmail appends server name to external domains when relaying

    - by Chris
    My server is set to send all email to a corporate relay server. For the company domain, it works perfectly. I've recently found emails being sent to an outside domain are getting the hostname of my server appended to the email prior to being sent. Here is the log entry for one such attempt. Nov 6 09:46:45 myservername sendmail[45023]: rA6EkjiI045023: [email protected], delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30590, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (rA6Ekj2g045037 Message accepted for delivery) Nov 6 09:46:45 myservername sendmail[45061]: rA6Ekj2g045037: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=120885, relay=relay.company.com [x.x.x.x], dsn=2.0.0, stat=Sent (ok: Message 342335947 accepted) Notice the email address difference between it being accepted by my server for delivery (correct email address), and being sent and accepted by the corporate relay (incorrect with server name appended). To make it more interesting, the application on my server uses email for user account verification/activation. In August, this particular user was able to register his account and activate it. I have made no configuration changes to mail since setting the server up over a year ago. DNS is also a corporate service. I've never touched my /etc/resolv.conf configuration. domain company.com nameserver <ip1> nameserver <ip2> search myservername Thanks!

    Read the article

  • RDP suggesting a user name when connecting to a server

    - by Neolisk
    Prior to Event X, RDPing to Server 2003 always caused the user name appear blank and Login to be enabled, so you could pick to which domain you would log in. For us it's either local or our domain. Since a recent Event X a domain + user name is being suggested for every server and it's not the most recently used user name. If you remove it manually from RDP dialog, it's still being pre-populated for you, and then at the next available opportunity it returns into General/User name option of RDP dialog. So user name field comes pre-populated and you cannot change to log in locally (only if you manually erase domain specifier - everything before \) - Log in to option is disabled by default. We did not do any changes to our domain or client machines, so I am suspecting some Windows update caused it (and this being Event X). Interesting fact - it does not consistently happen on all machines, and some can login to some servers fine, while other servers keep suggesting a default user name. What could be that Event X and is there a way to fix it? EDIT: I tried this - How to clear remote desktop connections history and specifically this part of it: reg delete "HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\UsernameHint" /f The problem still persists.

    Read the article

  • Updating files with a Perforce trigger before submit [migrated]

    - by phantom-99w
    I understand that this question has, in essence, already been asked, but that question did not have an unequivocal answer, so please bear with me. Background: In my company, we use Perforce submission numbers as part of our versioning. Regardless of whether this is a correct method or not, that is how things are. Currently, many developers do separate submissions for code and documentation: first the code and then the documentation to update the client-facing docs with what the new version numbers should be. I would like to streamline this process. My thoughts are as follows: create a Perforce trigger (which runs on the server side) which scans the submitted documentation files (such as .txt) for a unique term (such as #####PERFORCE##CHANGELIST##NUMBER###ROFL###LOL###WHATEVER#####) and then replaces it with the value of what the change list would be when submitted. I already know how to determine this value. What I cannot figure out, is how or where to update the files. I have already determined that using the change-content trigger (whether possible or not), which "fire[s] after changelist creation and file transfer, but prior to committing the submit to the database", is the way to go. At this point the files need to exist somewhere on the server. How do I determine the (temporary?) location of these files from within, say, a Python script so that I can update or sed to replace the placeholder value with the intended value? The online documentation for Perforce which I have found so far have not been very explicit on whether this is possible or how the mechanics of a submission at this stage would work.

    Read the article

  • DBCC CHECKDB fails and quits job, ambiguous error message.

    - by ddono25
    I received a notice that one of our servers' DBCC CHECKDB for all databases has been failing the past four times it has been run. We don't have any data prior to that, but it doesn't look like it has been succeeding for awhile. There are no errors in the log file only: DBCC results for 'sys.sysxmlfacet'. [SQLSTATE 01000] Msg 0, Sev 0, State 1: Unspecified error occurred on SQL Server. Connection may have been terminated by the server. [SQLSTATE HY000] There are 112 rows in 1 pages for object "sys.sysxmlfacet". [SQLSTATE 01000] I ran a DBCC CHECKDB using sp_MSForEachDB to get more accurate results and had the same error on the same DB but at a separate point: DBCC results for 'NameValuePair_Greek_CI_AS'. [SQLSTATE 01000] Msg 0, Sev 0, State 1: Unspecified error occurred on SQL Server. Connection may have been terminated by the server. [SQLSTATE HY000] There are 0 rows in 0 pages for object "NameValuePair_Greek_CI_AS". [SQLSTATE 01000] Also, the error-log states that the DBCC completed without errors for this database. I can't figure out how to track down this ambiguous issue that only happens on this database out of the dozens on this server. Any help is appreciated!

    Read the article

  • Is there a Mac utility that does low level drive integrity check and repair?

    - by Puzzled Late at Night
    The PGP Whole Disk Encryption for Mac OS X Quick Start User Guide version 10.0 contains the following remarks: PGP Corporation deliberately takes a conservative stance when encrypting drives, to prevent loss of data. It is not uncommon to encounter Cyclic Redundancy Check (CRC) errors while encrypting a hard disk. If PGP WDE encounters a hard drive with bad sectors, PGP WDE will, by default, pause the encryption process. This pause allows you to remedy the problem before continuing with the encryption process, thus avoiding potential disk corruption and lost data. To avoid disruption during encryption, PGP Corporation recommends that you start with a healthy disk by correcting any disk errors prior to encrypting. and As a best practice, before you attempt to use PGP WDE, use a third-party scan disk utility that has the ability to perform a low-level integrity check and repair any inconsistencies with the drive that could lead to CRC errors. These software applications can correct errors that would otherwise disrupt encryption. The PGP WDE Windows user guide suggests SpinRite or Norton Disk Doctor. What recourse do I have on the Mac?

    Read the article

  • Windows 7 black screen after boot animation

    - by t_virus
    This is happening with my windows 7 64-bit install frequently. Today i was trying to install an icon pack. There was already a restore point prior to it so i didn't feel like create one. I replaced the following system files in both system32 and sysWOW64 imageres.dll imagesp1.dll zipfldr.dll and shell32.dll After a reboot i see windows boot animation and then a black screen (with no mouse) I let it like that for 10 minutes and the laptop automatically went to sleep mode. I wake it up and see an error box this error "interactive logon failed to initialize" I close it and i'm left with a black screen again, this time with a mouse though. I tried using automatic system repair. It just tells me to remove any extra hardware (i have none attached atm) System restore finishes successfully but doesn't fix the problem. Safe mode doesn't work either. same black screen after boot animation Can someone help me with this? Also, I'll be grateful anyone can upload those default files (listed above) for both system32 and sysWOW64 from a windows 7 64bit install (no service pack)

    Read the article

  • Debian 100% cpu every 30 minutes but not loggable?

    - by user654123
    I have a Debian 7 x64 machine running with Digital Ocean that has every 30 Minutes a 100% cpu usage for about 1 minute. A couple of days ago it stayed there for a couple of hours so the server finally crashed and I had to repair my Mysql databases. The server is a pure webserver running apache2 and Mysql. I tried tracing which processes use the cpu but with no luck. The script I used: #!/bin/sh while true; do ps -A -eo pcpu,pid,user,args | sort -k 1 -r | head -3 >> proclog.txt; echo "\n" >> proclog.txt; sleep 2; done I was monitoring htop as well while this was happening, but the top processess' cpu usage didn't add up to ~15% even though htop's cpu meter showed constant 100%. htop was configured to show all users' processess, user- and kernel-threads. Edit: By stopping Apache2 & Mysql prior to the expected 100% usage I can tell both are not responsible for it. The 100% usage occurred anyway. This is what the graph looked like the past hours:

    Read the article

  • Out of memory errors but not actually out of memory...

    - by commradepolski
    So, myself and my fellow support techs have been fighting with this issue and we still dont know what the problem is. Lets start off with the system specs: Windows XP 32 bit Corporate (SP2 and SP3) Intel D975XBX2 Mobo 4gb of ram Intel Core 2 Quad Q6600 ATI Radeon HD 3600 - 512mb After a few hours of working on the machine, the end user will begin to see the following symptoms: Out of memory messages Title bars and menus dont draw in properly Problems accessing network resources Problems opening up documents such as MSWord and MSPowerpoint and text files Problems opening up explorer windows General instability We have looked at task manager while this issue was occurring, and all indicators, like PF usage, threads, handles, etc. are normal. We have been having trouble pinpointing the root cause of this issue. It is also not situated with one user, it affects 8-10. So far we have tried: Resetting CMOS (Waiting to see results) Replacing video card (didnt help) Windows updates (didnt help) Updating network drivers (didnt help) Switching user from 1gbps to 100mbps network connection (awaiting results) Swapping the affected user's hardware (waiting for results) Increasing desktop heap size (helped for a bit but then the issue became more frequent) Applying the /3 switch to XP (didnt help) Increasing and decreasing and setting PF to system managed state (didnt help) We did have a power outage at the office a couple weeks ago, and all these issues became more frequent. Prior to the power outage it may take a week or so for the users to experience the issues but since the power outage it takes 3-4 hours or less. We havent had reports of the above issues causing BSODs, although that would be easier to diagnose :). Any help is greatly appreciated.

    Read the article

  • System Issues and Major Malfuctions after Failed hibernation Exit

    - by Sarah Seguin
    I have a HP G71-340US that went into hibernation mode for a while and when I tried coming out of it, I got an error message: You're computer cannot come out if hibernation . Status: 0xc000009a Info: A fatal error occurred processing the restoration data. File: \hiberfil.sys Any information that was not saved before the computer went into hybernation will be lost enter=continue So I hit continue and it ran soooo super slow it. It was seriously crawling. Finally I gave up and turned it off manually (IE press and hold the button). It's been a week or two since then and EVERY SINGLE TIME I have tried to to do ANYTHING it takes forever. When I say forever, I literally mean takes 5-7 minutes to load the internet, then the page itself, then to click a link, so on so forth. Eventually everything just goes not responding and I have to give up (4-6 HOURS later). I also cannot access my thumb/jump drives once I've managed to load windows. I was going to try runing malware bytes incase of a virus, but it's windows explorer developes errors and goes not responding on me. Currently I'm running scan disk or check disk and like every file is coming back unreadable. I let it run the last 2 hours straight in chkdesk and I'm only at 6 percent with around 500+ errors and still going. Yes, I've taken logs of the errors via cell phone camera and patience. A week or two prior to this happening I had to change our the hard drive due to blunt force trama next to the mouse. OH! Running on Windows 7: ) And I've tried loading the computer in safe mode and it makes absolutely no difference. Any and all help would be appreciated. I really don't know what to do from here and I'm kind of freaking out. I've googled different part of the error and things that I've done/seen and there are so many different answers/topics that I thought it best to just post the questions.

    Read the article

  • HSphere - Only sees Apache 2 Test Page after forced shutdown?

    - by Darkwoof
    Hi, I have a dedicated server running on a Dell PowerEdge 850 with CentOS 4.4 and HSphere 3.0 Patch 6 colocated at a datacenter. Last night my hosting company had to schedule a change in the power bar, and I gave the go ahead for them to shut down the server and bring it up when they are done. Since they do not have admin access to the machine, I suppose they did a forced shutdown. When the machine was brought up, I found that all my domains (and sub-domains) are now pointing to an "Apache 2 Test Page" instead of the pre-configured sites that were running prior to the shutdown. This apparently only affects the standard sites running on port 80 - my Webmin instance running at port 1000 is still accessible for example, as well as my HSphere control panel running at port 8080. I've checked the config settings using the HSphere UI for each of the sites, and didn't find anything wrong. I've also tried rebooting the server via SSH, which does not rectify the problem. I've previously done reboots with no issues; the sites would just come right back up when its done, but not this time. I'm guessing some configuration file got corrupted or overwritten this time? Anyone with experience with HSphere and can provide some advice on what's happened and how to solve it? Thanks. (I do not have an active support agreeement for HSphere since Parallels took over and increased the min. license to 200. I only had 25 license for use by family and friends.) Thanks in advance.

    Read the article

  • Bootable ISO to USB stick xp quickest method

    - by brux
    My dog took a leak on my PC when I went out (ye funny), now it reandomly restarts - I'm convinced the HDD is failing because the Windows seagate diagnostic program fails on a few tests. I want to run this prior to windows in an attempt to try and recover sectors, the program includes an iso which can be written to cd and booted, but i dont have any cd's. I tried using unetbootin to create the bootable usb from the iso file (SeaToolsDOS222ALL.576.ISO) but it doesnt work. When i boot from the usb hdd unetbootin loads with "default" in the menu. No joy booting though. I checked the usb hdd in windows and all the files are there, extracted from the iso file, wont boot though. Any ideas? Im using windows xp. More info - when the computer restarts (like i just did now) it constantly reaches the end of POST and then restarts in infinite loop. If I pull the power cable out it will get back into windows, the longer i leave it between attempts, the longer I am able to stay in windows until it restarts. i.e if i leave the power cable out 5 minutes it will stay operable for longer than if i had left it out for only a few seconds.

    Read the article

  • How to backup Servers to an SSH-Host with low traffic and access to versions and encryption?

    - by leto
    Hello, I've not run backups for the past dont't remember anymore years for my personal stuff until waking up lately and realising contrary to my prior belief: Actually. I care! :) Now I have a central data server at home where I want to attach an external media to, to which I want to save backups of my most important stuff, like years of self-written scripts, database dumps, you name it. I've tinkered with rsync+ssh over the last two years, also tried tar over ssh, but don't know the simplest and most easy to maintain way to do it yet. Heres my workload: A typical LAMP-Server (<5GB Data) which I'd like to backup fully so lots of small files connected via 10Mbit My personal stuff (<750GB Data) from a Mac connected via GE My passwords in an encrypted container (100Mb) from OpenBSD connected via serial-PPP My E-Mail from the last ten years (<25GB) as Maildir which I need to keep in readable format Some archives (tar.*) which I need to backup only once and keep in readable format (Deleted my ideas, as I'm here for suggestions) What I need: 1. Use an ssh-tunnel for data transfer 2. Be quick with lots of small files 3. Keep revisions 4. Be sure the data I save is not corrupted 5. Intelligent resume functions and be able to deal with network congestion :) 6. Compressed and optionally encrypted storage 7. Be able to extract data from backup easily (filesystem like usage would be nice) How would and with what software would you backup this stuff? Hints to tools that can help solve only part of my problem (like encryption) also greatly appreciated. Greets

    Read the article

  • Does Mac OS X throttle the RATE of socket creation?

    - by pbhogan
    This may seem programming related, but this is an OS question. I'm writing a small high performance daemon that takes thousands of connections per second. It's working fine on Linux (specifically Ubuntu 9.10 on EC2). On Mac OS X if I throw a few thousand connections at it (roughly about 16350) in a benchmark that simply opens a connection, does it's thing and closes the connection, then the benchmark program hangs for several seconds waiting for a socket to become available before continuing (or timing out in the process). I used both Apache Bench as well as Siege (to make sure it wasn't the benchmark application). So why/how is Mac OS X limiting the RATE at which sockets can be used, and can I stop it from doing this? Or is there something else going on? I know there is a file descriptor limit, but I'm not hitting that. There is no error on accepting a socket, it's simply hangs for a while after the first (roughly) 16000, waiting -- I assume -- for the OS to release a socket. This shouldn't happen since all prior the sockets are closed at that point. They're supposed to come available at the rate they're closed, and do on Ubuntu, but there seems to be some kind of multi (5-10?) second delay on Mac OS X. I tried tweaking with ulimit every-which-way. Nada.

    Read the article

  • Does Mac OS X throttle the RATE of socket creation?

    - by pbhogan
    This may seem programming related, but this is an OS question. I'm writing a small high performance daemon that takes thousands of connections per second. It's working fine on Linux (specifically Ubuntu 9.10 on EC2). On Mac OS X if I throw a few thousand connections at it (roughly about 16350) in a benchmark that simply opens a connection, does it's thing and closes the connection, then the benchmark program hangs for several seconds waiting for a socket to become available before continuing (or timing out in the process). I used both Apache Bench as well as Siege (to make sure it wasn't the benchmark application). So why/how is Mac OS X limiting the RATE at which sockets can be used, and can I stop it from doing this? Or is there something else going on? I know there is a file descriptor limit, but I'm not hitting that. There is no error on accepting a socket, it's simply hangs for a while after the first (roughly) 16000, waiting -- I assume -- for the OS to release a socket. This shouldn't happen since all prior the sockets are closed at that point. They're supposed to come available at the rate they're closed, and do on Ubuntu, but there seems to be some kind of multi (5-10?) second delay on Mac OS X. I tried tweaking with ulimit every-which-way. Nada.

    Read the article

  • Inexpensive (used) hardware for Xen virtualization test?

    - by Jason Antman
    Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >