Search Results

Search found 7728 results on 310 pages for 'wifi driver'.

Page 83/310 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Nvidia API mismatch

  - by Oli

  I had planned a day of relaxing with Portal 2 but on starting Steam (for the first time in a couple of weeks) I was greeted with the following message in the terminal: Error: API mismatch: the NVIDIA kernel module has version 270.41.19, but this NVIDIA driver component has version 270.41.06. Please make sure that the kernel module and all NVIDIA driver components have the same version. I'll confess I don't really know what it's talking about when it says driver. The verion of nvidia-current is 270.41.19. I thought that was the driver and module, all in one. I use the X-SWAT PPA and I have noted that the nvidia-settings package has boosted to 275.09.07. As this is just a settings application, I don't think this mismatch has anything to do with this. It's also not the same version as the problem being described. I'd rather not purge back to the standard Nvidia driver as it's less than stable on my GTX580. I would accept an answer that takes the manual setup and makes it recompile when the kernel recompiles (ie, some DKMS wizardry) but it has to work. I don't want to drop back to text-mode every time I restart after a kernel upgrade. Edit: Minecraft works without a single complaint about driver versions. Penumbra dies with roughly the same error when entering a game.

  Read the article

• Slow boot on Ubuntu 12.04, probable cause the network connection

  - by Ravi S Ghosh

  I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

  Read the article

• How can I get nvidia-96 installed?

  - by Bob

  I'm at my wits end here. This is my last effort before I go back to Windows. I need to get nvidia-96 proprietary driver installed. Synaptic won't install it because it says it has dependencies. I installed every single dependency it listed except for "xorg-video-abi-10" which does not show up as an item that can be installed. I have no idea what to do. Using 11.10 with a NVIDIA Geforce 3 GPU. Anyone know how to get this dang driver installed? @fossfreedom: the opensource driver is extremely slow. So slow that the OS is unusable—words appear seconds after I type them—programs take forever to perform actions. Also it is causing my monitor to turn on and off for no reason. @yossile: synaptic shows that I have xserver-xorg-core installed. And xserver-xorg-core-udeb does not show up as something that can be installed. @papseddy: when I try to install the downloaded nvidia driver it says it won't work until I disable Nouveau kernel driver. I have tried everything to get this dang Nouveau kernel driver disabled. Nothing has been successful.

  Read the article

• Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

  - by echo-flow

  I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

  Read the article

• How do I install the pdo_mysql driver on Red Hat Enterprise Linux 6.1?

  - by Will Martin

  I have a RHEL box running PHP 5.3.3, which was installed using the binary packages provided by yum. I have installed the php-pdo package: # yum info php-pdo Loaded plugins: product-id, rhnplugin, subscription-manager Updating Red Hat repositories. Installed Packages Name : php-pdo Arch : x86_64 Version : 5.3.3 Release : 3.el6_1.3 Size : 168 k Repo : installed From repo : rhel-x86_64-server-6 Summary : A database access abstraction module for PHP applications URL : http://www.php.net/ License : PHP Description : The php-pdo package contains a dynamic shared object that will add : a database access abstraction layer to PHP. This module provides : a common interface for accessing MySQL, PostgreSQL or other : databases. It appears to be working correctly for SQLite databases, but not MySQL. There's no file including pdo_mysql.so in /etc/php.d, and there is no copy of pdo_mysql.so in /usr/lib64/php/modules. I'm pretty sure I just need the driver file and a line in the PHP configuration. A yum search pdo mysql didn't turn up any useful packages, and Google has failed me. If I were on Ubuntu or Debian, I'd apt-get install php5-mysql and be done with it. So ... where in Red Hat land do I get a copy of pdo_mysql.so, and install it properly?

  Read the article

• Can't get intel atom g-500 video driver to work with ubuntu 10.10 netbook edition.

  - by Matthew

  First of all I am completely new to Linux, so if you respond, please do so in a 'linux for dummies' tone so that my brain will be able to process it. I recently installed ubuntu on my dell mini-inspiron 1010. It has one GB of ram and an intel atom processor that uses the intel 500 graphic accelerator driver for windows and can run 1024x768 comfortably in xp. When I was installing ubuntu had quite a bit of trouble with my display and I am still unable to adjust my settings from 800x600x0x0 and there is no hardware acceleration. I visited the intel site and installed the linux drivers with the help of a friend but still no change. I tried adding resolution settings through xconf but they could not be applied even after I added the values. I am probably going about this totally wrong, but I've spent quite a lot of time browsing through forums and still haven't found a solution. Any help would be greatly appreciated. Also any other beginner tips that you have would be much appreciated. Thanks in advance, Matt

  Read the article

• Recommendation for a simple no-frills Windows PDF printer driver?

  - by Scott Bussinger

  I'm looking for an extremely simple Windows PDF printer driver that I can recommend to clients. Ideally it would have these characteristics: When you print something, it should just create it as a temporary file and then display it in their default PDF viewer with no prompting. If they want to save it, they can save it manually from inside the viewer. This workflow should be with no special post-install configuration. Installation should be very simple. A double click the installation program and click "Finish" sort of thing. No complicated multi-step installation, no asking questions your grandmother wouldn't know the answer to (preferably no questions at all), no extra crap being installed. An option for a completely silent installation would be nice, but not necessary. Ideally it would be free to simplify their installing on a small network, but low cost is an option. I've tried a quite a few but none really fit the bill. Some can achieve the first goal but only after careful configuration, some try to install extra toolbars, some have other installation complexities that would make it hard for extremely novice users to succeed. Any suggestions? Thanks!

  Read the article

• connecting to mysql from excel: ODBC driver does not support the requested properties.

  - by every_answer_gets_a_point

  i am trying to add data to mysql from excel. i am getting the above error on this line: rs.Open strSQL, oConn, adOpenDynamic, adLockOptimistic here is my code: Dim oConn As ADODB.Connection Private Sub ConnectDB() Set oConn = New ADODB.Connection oConn.Open "DRIVER={MySQL ODBC 5.1 Driver};" & _ "SERVER=localhost;" & _ "DATABASE=employees;" & _ "USER=root;" & _ "PASSWORD=some_pass;" & _ "Option=3" End Sub Function esc(txt As String) esc = Trim(Replace(txt, "'", "\'")) End Function Private Sub InsertData() Dim rs As ADODB.Recordset Set rs = New ADODB.Recordset ConnectDB With wsBooks For rowCursor = 2 To 11 strSQL = "INSERT INTO tutorial (author, title, price) " & _ "VALUES ('" & esc(.Cells(rowCursor, 1)) & "', " & _ "'" & esc(.Cells(rowCursor, 2)) & "', " & _ esc(.Cells(rowCursor, 3)) & ")" rs.Open strSQL, oConn, adOpenDynamic, adLockOptimistic Next End With End Sub whats wrong with rs.Open strSQL, oConn, adOpenDynamic, adLockOptimistic ? why am i getting the odbc error?

  Read the article

• which to use OLEDB or ODBC for SYbase

  - by nitinkhanna

  Hi, I am not able to figure out which drivers should I use. Even I don't know what I have. When I am trying to make the connection string through the .udl file it only shows SYbase ASE OleDB Provider while in install folder I can see in driver list Syabse Ase ODBC driver but in connection string it is unable to pick up the driver, here I used Driver = (Sybase ASE ODBC Driver) What should I go for? Thanks

  Read the article

• Ubuntu 12.04 wireless (wifi) not working, can not upgrade to 12.10, touchpad gestures not working. What to do?

  - by Ritwik

  I installed ubuntu 12.04 LTS 3 days ago and since then wireless feature and touchpad gestures are not working. Tried everything on internet but still unsuccessful. I cant upgrade to ubuntu 12.10. These are the following comments I tried. Please help me. EDIT: just realized usb 3.0 is also not working. COMMAND lsb_release -r OUTPUT ----------------------------------------------------------------- Release: 12.04 ----------------------------------------------------------------- COMMAND lspci OUTPUT ------------------------------------------------------------------ 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5) 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 07:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0f:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) ------------------------------------------------------------------ COMMAND sudo apt-get install linux-backports-modules-wireless-lucid-generic OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-backports-modules-wireless-lucid-generic ------------------------------------------------------------------- COMMAND cat /etc/lsb-release; uname -a OUTPUT ------------------------------------------------------------------- DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS" Linux ritwik-PC 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------------- COMMAND lspci -nnk | grep -iA2 net OUTPUT ------------------------------------------------------------------- 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:225d] Kernel driver in use: r8169 -- 0f:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:217f] ------------------------------------------------------------------- COMMAND lsusb OUTPUT ------------------------------------------------------------------- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. ------------------------------------------------------------------- COMMAND iwconfig OUTPUT ------------------------------------------------------------------- lo no wireless extensions. eth0 no wireless extensions. ------------------------------------------------------------------- COMMAND rfkill list all OUTPUT ------------------------------------------------------------------- 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no ------------------------------------------------------------------- COMMAND lsmod OUTPUT ------------------------------------------------------------------- Module Size Used by snd_hda_codec_realtek 224215 1 bnep 18281 2 rfcomm 47604 0 bluetooth 180113 10 bnep,rfcomm parport_pc 32866 0 ppdev 17113 0 nls_iso8859_1 12713 1 nls_cp437 16991 1 vfat 17585 1 fat 61512 1 vfat snd_hda_intel 33719 3 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event nouveau 775039 0 joydev 17693 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 76949 1 nouveau uvcvideo 72627 0 snd 79041 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 98259 1 uvcvideo drm_kms_helper 46978 1 nouveau psmouse 98051 0 drm 241971 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 13423 1 nouveau soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm v4l2_compat_ioctl32 17128 1 videodev hp_wmi 18092 0 serio_raw 13211 0 sparse_keymap 13890 1 hp_wmi mxm_wmi 13021 1 nouveau video 19651 1 nouveau wmi 19256 2 hp_wmi,mxm_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62190 0 ------------------------------------------------------------------- COMMAND sudo su modprobe -v ath9k OUTPUT ------------------------------------------------------------------- insmod /lib/modules/3.2.0-67-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/3.2.0-67-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko ------------------------------------------------------------------- COMMAND do-release-upgrade OUTPUT ------------------------------------------------------------------- Err Upgrade tool signature 404 Not Found [IP: 91.189.88.149 80] Err Upgrade tool 404 Not Found [IP: 91.189.88.149 80] Fetched 0 B in 0s (0 B/s) WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem. ------------------------------------------------------------------- COMMAND sudo modprobe ath9k dmesg | grep ath9k NO OUTPUT FOR THEM COMMAND dmesg | grep -e ath -e 80211 OUTPUT ------------------------------------------------------------------- [ 13.232372] type=1400 audit(1408867538.399:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=975 comm="apparmor_parser" [ 13.232615] type=1400 audit(1408867538.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=975 comm="apparmor_parser" [ 15.186599] ath3k: probe of 3-4:1.0 failed with error -110 [ 15.186635] usbcore: registered new interface driver ath3k [ 88.219329] cfg80211: Calling CRDA to update world regulatory domain [ 88.351665] cfg80211: World regulatory domain updated: [ 88.351667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 88.351670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351674] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ------------------------------------------------------------------- COMMAND sudo apt-get install touchpad-indicator OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gir1.2-gconf-2.0 python-pyudev Suggested packages: python-qt4 python-pyside.qtcore The following NEW packages will be installed: gir1.2-gconf-2.0 python-pyudev touchpad-indicator 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 84.1 kB of archives. After this operation, 1,136 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://ppa.launchpad.net/atareao/atareao/ubuntu/ precise/main touchpad-indicator all 0.9.3.12-1ubuntu1 [46.5 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/main gir1.2-gconf-2.0 amd64 3.2.5-0ubuntu2 [7,098 B] Get:3 http://archive.ubuntu.com/ubuntu/ precise/main python-pyudev all 0.13-1 [30.5 kB] Fetched 84.1 kB in 2s (31.6 kB/s) Selecting previously unselected package gir1.2-gconf-2.0. (Reading database ... 169322 files and directories currently installed.) Unpacking gir1.2-gconf-2.0 (from .../gir1.2-gconf-2.0_3.2.5-0ubuntu2_amd64.deb) ... Selecting previously unselected package python-pyudev. Unpacking python-pyudev (from .../python-pyudev_0.13-1_all.deb) ... Selecting previously unselected package touchpad-indicator. Unpacking touchpad-indicator (from .../touchpad-indicator_0.9.3.12-1ubuntu1_all.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for software-center ... INFO:softwarecenter.db.update:no translation information in database needed Setting up gir1.2-gconf-2.0 (3.2.5-0ubuntu2) ... Setting up python-pyudev (0.13-1) ... Setting up touchpad-indicator (0.9.3.12-1ubuntu1) ... ------------------------------------------------------------------- Not able to find ( drivers/net/wireless/ath/ath9k/hw.c ) or ( drivers/net/wireless/ath/ath9k/hw.h )

  Read the article

• How do I send traffic from my Mac's wifi to my VPN client?

  - by Heath Borders

  I need to connect my Android to a Juniper VPN. Unfortunately, Juniper doesn't support Android on our VPN version. We've already put in a feature request for it, but we have no idea how long it will take to be complete. Right now, I connect to the Juniper VPN with a Juniper Mac OSX VPN client that uses Java to install kernel extensions to start and stop the VPN. Thus, I can't use the Network panel in System Preferences to create a VPN device, which means it won't show up in the 'Sharing' panel's Internet Sharing Share your connection from: menu, as suggested here. I used newproc.d to see what /usr/libexec/InternetSharing did when it ran, and it runs the following processes: 2013 Nov 1 00:26:54 5565 <1> 64b /usr/libexec/launchdadd 2013 Nov 1 00:26:55 5566 <1> 64b /usr/libexec/InternetSharing 2013 Nov 1 00:26:56 5568 <5566> 64b natpmpd -d -y bridge100 en0 2013 Nov 1 00:26:56 5569 <1> 64b /usr/libexec/pfd -d 2013 Nov 1 00:26:56 5567 <5566> 64b bootpd -d -P My Juniper VPN client creates the following devices (output of ifconfig): jnc0: flags=841<UP,RUNNING,SIMPLEX> mtu 1400 inet 10.61.9.61 netmask 0xffffffff open (pid 920) jnc1: flags=841<UP,RUNNING,SIMPLEX> mtu 1450 closed So, it seems like I should just be able to do this and have everything work: sudo killall -9 natpmpd sudo /usr/libexec/natpmpd -y bridge100 jnc0 My android connected fine and could hit public internet sites, but it couldn't hit private VPN sites. I assume this is because I need to change the routes that /usr/libexec/InternetSharing sets up. This is the output from sudo pfctl -s all before starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all rdr-anchor "com.apple/*" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble anchor "com.apple/*" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all INFO: Status: Disabled for 0 days 00:11:02 Debug: Urgent State Table Total Rate current entries 0 searches 22875 34.6/s inserts 1558 2.4/s removals 1558 2.4/s Counters match 2005 3.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 0.0/s proto-cksum 0 0.0/s state-mismatch 1 0.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 OS FINGERPRINTS: 696 fingerprints loaded This is the output from sudo pfctl -s all after starting Internet Sharing: No ALTQ support in kernel ALTQ related functions disabled TRANSLATION RULES: nat-anchor "com.apple/*" all nat-anchor "com.apple.internet-sharing" all rdr-anchor "com.apple/*" all rdr-anchor "com.apple.internet-sharing" all FILTER RULES: scrub-anchor "com.apple/*" all fragment reassemble scrub-anchor "com.apple.internet-sharing" all fragment reassemble anchor "com.apple/*" all anchor "com.apple.internet-sharing" all DUMMYNET RULES: dummynet-anchor "com.apple/*" all STATES: ALL tcp 10.0.1.32:50593 -> 74.125.225.113:443 SYN_SENT:CLOSED ALL udp 10.0.1.32:61534 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:55433 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL udp 10.0.1.32:64041 -> 10.0.1.1:53 SINGLE:NO_TRAFFIC ALL tcp 10.0.1.32:50619 -> 74.125.225.131:443 SYN_SENT:CLOSED INFO: Status: Enabled for 0 days 00:00:01 Debug: Urgent State Table Total Rate current entries 5 searches 22886 22886.0/s inserts 1563 1563.0/s removals 1558 1558.0/s Counters match 2010 2010.0/s bad-offset 0 0.0/s fragment 0 0.0/s short 0 0.0/s normalize 0 0.0/s memory 0 0.0/s bad-timestamp 0 0.0/s congestion 0 0.0/s ip-option 12 12.0/s proto-cksum 0 0.0/s state-mismatch 1 1.0/s state-insert 0 0.0/s state-limit 0 0.0/s src-limit 0 0.0/s synproxy 0 0.0/s dummynet 0 0.0/s TIMEOUTS: tcp.first 120s tcp.opening 30s tcp.established 86400s tcp.closing 900s tcp.finwait 45s tcp.closed 90s tcp.tsdiff 60s udp.first 60s udp.single 30s udp.multiple 120s icmp.first 20s icmp.error 10s grev1.first 120s grev1.initiating 30s grev1.estblished 1800s esp.first 120s esp.estblished 900s other.first 60s other.single 30s other.multiple 120s frag 30s interval 10s adaptive.start 6000 states adaptive.end 12000 states src.track 0s LIMITS: states hard limit 10000 app-states hard limit 10000 src-nodes hard limit 10000 frags hard limit 5000 tables hard limit 1000 table-entries hard limit 200000 TABLES: OS FINGERPRINTS: 696 fingerprints loaded It looks like I need to change the pf settings that /usr/libexec/InternetSharing set up, but I have no idea how to do that.

  Read the article

• Two Router issue, cannot reach internet

  - by DeBuGGeR

  I have on ADSL router and one CISCO Wifi Router. The ADSL Router is working fine on its own. I am connecting the lan port of the ADSL Router to the internet(RJ45) port of my Cisco wifi router. But I cannot access the internet from the Cisco router, neither through wifi nor through ethernet connection. The IP of ADSL router is 192.168.1.1 and the ip of my Wifi router is 192.168.1.100. Should I connect to the LAN port of my Wifi router rather than using the ethernet port(Marked as Internet)?

  Read the article

• How to make a streaming server to stream media from computer to mobile phone in wifi?

  - by zkz

  Usually we have many HD movies in our computer, but we want to see them by our mobile phone. This requirement produces some questions: 1?the HD videos are too big to transfer to phone timely and it it hard to play on phone smoothly, so we have to transform the videos smaller and fit the screen of phone. 2?the coded format of the videos are varied, but limited types are supported by mobile phone, so we should transform the coded format to those supported by mobile phone. I've leaned the streaming media fit this problem, what I want is: 1?are there any good opensource projects fit this(ffmpeg?live555? darwin?)? 2?are they quick enough to transform coded format and transfer to mobile phone to play with no delay? Thank u very much!

  Read the article

• Windows 7 Natively on Mac OS X Bootcamp, Airport Wifi Unable To Connect....

  - by Goober

  Hello! I am using a brand new MacBook Pro. I am running a copy of Windows 7 natively via bootcamp (No use of Virtual Machine Software at all). However the only way I can get Windows to connect to the internet is via ethernet, as opposed to the Macs Airport card picking up the wireless. It just refuses to connect, and gives me a limited access status. Any ideas!? I've run Windows XP natively via bootcamp and I had a few issues with the network constantly dropping out, however I blamed that on the drivers and the general shiteness of XP.... Help greatly appreciated.

  Read the article

• Creating Shared Wifi Connection on Windows 7 WITHOUT wep/wpa security?

  - by Duncan

  Ok, for some reason I just can't figure this out on Windows 7. Never had an issue with it on Windows XP, never tried in Vista. I realize that I need to create an Ad-Hoc setup which I can do. However I can't get it to share the wireless signal on my laptop. Even if I go into the adapter settings. I need (well, want) to connect my old Psion netBook to my home network and due to the wireless card, I can't have any form of security. Thanks in advance!

  Read the article

• Can't connect to Apple Time Capsule in home network using Home Plugs from Win 7 Machine

  - by Eugene

  I have the following home network setup with subnet 255.255.255.0 but recently moved my time capsule to a different location when I added a third Home Plug and can no longer ping or map a network drive to it from the Windows 7 Machine. However using Airport Utility on the Windows 7 machine I can manually configure the Time Capsule. Using a Macbook on WIFI Network 1 or 2 - I can backup to the time capsule, so its accessible via both the router wifi network and the time capsule wifi network. The Time Capsule is set to BRIDGE function - ie no NAT or DHCP server enabled. Any bright sparks out there that can help diagnose the problem? Router (192.168.1.254) WIFI Network 1 | | |---- Home Plug one |---- Home Plug Two | |---- Computer A Windows 7 (192.168.1.160) | |---- Printer (192.168.1.69) |---- Home Plug Three | |---- Apple Time Capsule (192.168.1.150) WIFI Network 2 |---- Smart TV (192.168.1.70) | |---- Apple TV (192.168.1.4)

  Read the article

• is it good to have or difference between ADSL Modem+WiFi Router and Separate ADSL Modem & Wi-Fi Router?

  - by vikas devde

  I have ADSL2 Modem which I got from my service provider, now I want to setup wireless(Wi-Fi) in my home. I went to shop, where I came to know that there are routers which come up with modem also but they are priced lil higher than the only wi-fi routers. Now it is obvious that I should go for only wi-fi one, as I already have modem. My question is, is there any difference between ADSL+router and only router? I think if I use ADSL+router, the speed will increase lilbit, as modem does modulate and demodulate signals, and router also generates wireless signal, that is time to take conversions is doubled, and if I use ADSL+modem, it will directly convert the signals to wireless, and time will be saved, so the overall speed will increase lilbit. This is what my concept is(Which might be wrong). What do you guys would suggest me? should I take my current modem away and buy an ADSL+router or I should keep my modem and buy only wi-fi one. Please tell me the difference and suggest me which one I should go with, and also suggest me which company router I should go for.

  Read the article

• Why can I view my site over a 3G connection but not through my wifi?

  - by Jonathan

  So, I am sitting in my office with four computers on the same network and internet connection. Two of the computers can visit this particular website. Two of the computer get a message "Google Chrome could not find". I have tried FF and IE also with the same problem. I can view the site 90% of the time on two of the working computers although the site seems slow and sometimes I also get the same errors as the other two computers. I have flushed the DNS, reset the router, tested the site on other peoples computers with success. Is this likely to be a site issue, an ISP issue, a hosting issue? Any advice is greatly appreciated. Here is the ping from the working machine: C:\Users\Jon>ping www.balihaicruises.com Pinging www.balihaicruises.com [208.113.173.102] with 32 bytes of data: Reply from 208.113.173.102: bytes=32 time=331ms TTL=47 Reply from 208.113.173.102: bytes=32 time=327ms TTL=47 Reply from 208.113.173.102: bytes=32 time=326ms TTL=47 Reply from 208.113.173.102: bytes=32 time=329ms TTL=47 Ping statistics for 208.113.173.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 326ms, Maximum = 331ms, Average = 328ms Traceroute: Tracing route to www.balihaicruises.com [208.113.173.102] over a maximum of 30 hops: 1 1 ms 17 ms 3 ms 192.168.1.1 2 42 ms 37 ms 36 ms 180.254.224.1 3 39 ms 47 ms 40 ms 180.252.1.69 4 36 ms 616 ms 57 ms 61.94.115.221 5 84 ms 76 ms 80 ms 180.240.191.98 6 73 ms 80 ms 72 ms 180.240.191.97 7 157 ms 143 ms 116 ms 180.240.190.82 8 115 ms 113 ms 120 ms ae1-123.hkg11.ip4.tinet.net [183.182.80.93] 9 331 ms 332 ms 335 ms xe-3-2-1.was14.ip4.tinet.net [89.149.184.30] 10 327 ms 330 ms 331 ms internap-gw.ip4.tinet.net [77.67.69.254] 11 437 ms 415 ms 350 ms border10.pc2-bbnet2.wdc002.pnap.net [216.52.127.73] 12 322 ms 823 ms 398 ms dreamhost-2.border10.wdc002.pnap.net [216.52.125.74] 13 328 ms 336 ms 326 ms ip-208-113-156-4.dreamhost.com [208.113.156.4] 14 326 ms 328 ms 336 ms ip-208-113-156-14.dreamhost.com [208.113.156.14] 15 327 ms 331 ms 333 ms apache2-udder.crisp.dreamhost.com [208.113.173.102] And then for the machine that doesn't work: C:\Users\Microsoft>ping www.balihaicruises.com Ping request could not find host www.balihaicruises.com. Please check the name and try again. C:\Users\Microsoft>tracert www.balihaicruises.com Unable to resolve target system name www.balihaicruises.com.

  Read the article

• Why is my Wifi connection slower than ethernet even though bandwidth should saturated?

  - by supercheetah

  I'm wondering why it is that my wireless connection is slower than my wired connection for things going to the outside world (so, not files being transferred within the network), which is should be faster than the outside connection, which, I would think, would mean that downloading something like an ISO or other large file from the Internet should be the same either way since that should saturate the connection anyway. Does it have something to do with the encryption (WPA)? Could it have something to do with MTU since the MTU for ethernet can be in the range of 1500 to 9000 bytes, and 2304 bytes for 802.11? Do wireless packets have to be buffered, whereas this wouldn't be an issue with ethernet? What's the math behind the difference?

  Read the article

• Could not connect to wireless unitl reboot (nl80211)

  - by user107410

  I'm using Samsung NP900X3C. I have problem with occasionally connecting to WIFI, with Ubuntu 12.10. Sometimes my computer could not connect to WIFI "blab", neither after reboot computer. Only solution is to restart WIFI hotspot. It's public WIFI, used by many users, that don't have that problem. My /var/log/syslog: Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.908610] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:39 k15 kernel: [ 8.915032] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.916753] wlan0: authenticated Nov 12 10:09:39 k15 kernel: [ 8.916839] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.386212] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.389114] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:42 k15 kernel: [ 12.391021] wlan0: authenticated Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:42 k15 kernel: [ 12.391332] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:46 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) and after restart WiFi, I could connect: Nov 12 10:11:51 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: inactive -> scanning Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 kernel: [ 144.445154] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.453994] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:11:55 k15 kernel: [ 144.455860] wlan0: authenticated Nov 12 10:11:55 k15 kernel: [ 144.458681] wlan0: associate with 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:11:55 k15 kernel: [ 144.462799] wlan0: RX AssocResp from 64:70:02:89:7c:d7 (capab=0x431 status=0 aid=9) Nov 12 10:11:55 k15 kernel: [ 144.486368] wlan0: associated Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Associated with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.487435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> associated Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake This problem is appearing regulary. My WiFi device control is nl80211. Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): using nl80211 for WiFi device control Nov 12 10:09:32 k15 NetworkManager[1004]: <warn> (wlan0): driver supports Access Point (AP) mode Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): now managed Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): bringing up device.

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• Can make the proxy settings invisible when I share my internet connection via wifi?

  - by Neil

  This is probably a long shot... I have an HTC Desire and frustratingly found out after I got it that it doesn't support network proxy settings. We have a wireless network at my office that uses a proxy. My desktop at work runs ubuntu. I was wondering if the following set up would work: Plug a USB Wireless adapter into the desktop that has a working internet connection using the proxy. Setup the wireless adapter as an ad-hoc network Share the internet connection over the ad-hoc network. Make it so that the use of the proxy is invisible to users of the shared network connection. Connect the Android phone to the ad-hoc wireless network and utilise the internet connection. My question is this: Is this possible or should I give up now and not even try? I think I can handle steps 1, 2, 3 and 5. I just have no idea if step 4 even makes sense, let alone is possible. Thanks

  Read the article

• How can we connect TP-link Access Point- TL-WA5210G with Wifi Lan card?

  - by PPS

  I would like to know that, We have a small Wireless Network that covers 40 mtrs indoor. Now we plan to expand our Network Coverage area apporx. 200 Mtrs (Outdoor). Due to our requirement we used TP- Link Access Point TL-WA5210G Outdoor(This AP covers 15Km area). We have 3 blocks between 200 mtrs, We like to connect all the laptops Lan Card directly with required Access-point. What should we do to achieve this, right now we are not getting the full strength signal, when we cross the 80 mtrs. So please suggest me proper configuration for implementing this TP-Link access point. Thanks PPS

  Read the article

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >