Search Results

Search found 26693 results on 1068 pages for 'back to basics'.

Page 830/1068 | < Previous Page | 826 827 828 829 830 831 832 833 834 835 836 837  | Next Page >

• Grub Installation Failed: Fatal Error ... now what I do?

  - by eklavya

  I know there are some threads that touch this but I feel I have done something uniquely stupid. hence the post and plea for help. I am a beginner @ Linux. So I have a PC with a HDD (hard disk drive) and SSD (solid state drive) It was running Linux Mint /dev/sda1 - HDD Partition 1 - 2 TB (mounted this is /home /dev/sda2 - HDD Partition 2 - 1 TB (separate back up drive, i was backing up files to this) /dev/sdb1 - SSD Partition 1 - 100 GB (OS) /dev/sdb2 - SSD Partition 2 - 20 GB (Swap) The operating system was Linux Mint and was installed on the /dev/sdb1 i.e the solid state drive. I had partitioned off the sda into 2 TB and 1TB and presented the 2 TB as the /home to the OS. Anyway last night I decided to make a return to Ubuntu via the path of Elementary OS. Everything went fine with the install until it stated that GRUB installed failed and this was a Fatal error (no kidding I said). No I am stuck. I have definitely done something wrong and don't know what it is... My biggest pain is the files on the /dev/sda2. I want to save these before I try something drastic like wiping off the /dev/sda completely. So I have the following questions... Can I use a liveCD USB to save these files ? I can see the /dev/sda2 but was unable to access the files in the liveCD last not least ... how do I fix the main issue here. Why could the OS not install GRUB 2b... why is my SSD the /dev/sdb ... and not /dev/sda. Does that have something to do with it that my master boot record sits on the HDD /dev/sda and not /dev/sdb

  Read the article

• How to fix Windows 7 when System Recovery Options hangs?

  - by seansand

  The battery power ran out on my HP G60 laptop and it shut down. Even after recharging, Windows 7 will now not start up. After any attempted startup, it bluescreens and takes me to the "Startup Repair (recommended)" / "Start Windows Normally" console screen. "Startup Repair (recommended)" appears to be the right choice, but when I choose it, I get taken to a screen which appears to be System Recovery Options (it's the same wallpaper as the screenshots here: http://www.sevenforums.com/tutorials/668-system-recovery-options.html). However, I just get a cursor with nothing else; no "System Recovery Options" window ever pops up. (A black console screen does pop up for a split-second but too fast to be able to read the text.) The empty screen with cursor hangs indefinitely. System Recovery Options normally runs off of a partition on the laptop hard drive. When I got the laptop, I also created a System Repair Disc (in fact I have more than one) and when I try use any of them; they all result in the same wallpaper and empty screen with lone cursor. Ctrl-Alt-Del does nothing. The computer did not come with a Windows 7 installation disc, so there's no obvious way to reinstall Windows 7. Safe mode does not work; startup fails and I just get sent back to the "Startup Repair (recommended)"/"Start Windows Normally" console screen. "Start in last good state" does not work either, same result as above. Running a memory & hard disk check found no errors. Do I have any options at all? "System Recovery Options" seems to be what I want, but the screen that is supposed to take me to them just hangs.

  Read the article

• Command prompt cannot find PATH variable

  - by davidXYZ

  Sometimes, my command prompt cannot find the PATH variable. I have this occasional problem at work where when I open command-prompt and run commands like ipconfig or subst, I get an error saying something like 'ipconfig' is not recognized as an internal or external command. When I try this echo %path%, it prints out %path% instead of the PATH value. If I look at my Environment Variables window, the PATH is defined right there but I don't know why CMD can't find it. At this point, I understand why the other commands were not being recognized since their paths are in PATH variable. However, I cannot understand why the PATH variable is not being found. If I restart the computer, everything is back to normal. In a few days, I might have the same experience again. I tried using this answer. It suggested changing a registry value but mine already had the value that was suggested yet it wasn't working. (The restart step at the end would have solved it as usual but that's not the point.) Any suggestions regarding why the PATH variable may become invisible every now and then and how I can prevent it from happening again?

  Read the article

• How to find Stolen MacBook with iCloud

  - by user1518089

  My MacBook Air was stolen about 6 weeks ago. Through iCloud and "Find Phone", I have some pictures and a location down to about 2 blocks. The pictures are from the current user taking photos which automatically appear on my local devices. (Yes they probably saw my pictures until I stopped taking them. Yes, they are stupid.) I was thinking about going there and hanging out until I recognized the current users, but it is in a very bad neighborhood and I would be noticed. The police have not done anything. Yes, the MacBook can be locked or a message sent. I am hoping to get it back. Does anyone have ideas on how to track them down? While Find Phone shows their location, it does not report an ip address. Is there a way to get an ip address? Does Facebook face recognition work on strangers? Come on tech geniuses, help me play detective. It does not have Drop Box installed.

  Read the article

• vim: mapping <control-j> key

  - by bhh1988

  When I'm in insert mode, I sometimes want to be able to move around without using the arrow keys, and without having to go back into normal mode. So in my vimrc I've set up key bindings to do this: imap <C-l> <right> imap <C-h> <left> imap <C-k> <up> imap <C-j> <down> But for some odd reason the only one that doesn't work is the last one, . Doing this in insert mode just gives no response. I'm wondering why this might be, and I just don't know where to even begin looking for the problem. It doesn't appear to be mapped to anything since nothing happens when I do it, whether I'm in the terminal or in gvim. Any pointers would be great! Thanks!

  Read the article

• Windows 7 VPN only works if I connect it to itself first

  - by user1799075

  Just so you have some detail, VPN request are port forwarded from a linksys router hosting the global static IP (to the world) to the windows 7 machine. The ports have been added to the OK list. I have the incoming VPN connection setup on win 7 but the only way it will work from anywhere outside the physical machine is if I connect from itself to itself first. For example, let's say my internal static IP is 10.0.0.50 and incoming VPN server connection IP is 10.0.0.80 (both on the same machine). I can't connect via VPN from anywhere unless I first VPN from the machines .50 address back to itself on the .80 address. Once I do that, I can connect form anywhere, even my phone. It's as if once the machine reboots it thinks it should block requests on .80 until .50 connects first. BitDefender antivirus/firewall is loaded (windows firewall is off) I don't see anywhere to exclude ports in the BitDefender control panel. Maybe this initial connection opens the ports and tags them as safe because the initial request came from the same machine? Any thoughts? It's driving me nuts and I'm sick of having to drive half way across town over to the server, try to get building access and do the initial connection. Please help

  Read the article

• How do I prevent lighttpd from caching static files, even when modified on disk?

  - by Pixelastic

  I am using lighttpd to serve static files. I have a bunch of images in a dir that I regularly update. This will change the file content (and filesize) as well as the modification date, but not their filename. When I access the files through http, the updates are not taken into account and lighty serves the old file. I can manually rename the file to something different, then lighttpd will return a 404 error, and if I rename my file back, I will get the correct updated version. Seems like lightty is using some kind of cache mechanism of its own (which is fine) to return static files. Unfortunatly, it seems that this mechanism doesn't update itself when files are modified. I checked through Wireshark, and my browser is really doing a request to the file, this is not a browser caching issue. It returns a 200 OK when requesting it from an empty cache, and a 304 Not Modified otherwise, as expected. But the file is returned with a wrong Last-Modified header that do not reflect the real last modification date. Maybe there is some config directive that I am not aware of ? I would like the files returned by lighty to reflect the changes made on disk directly, or at least being able to invalidate its cache.

  Read the article

• ASP.NET, IS7 and IE8 caching?

  - by jdege

  We're suddenly having problems with some of our sites having old versions of .css and .js files show up in the browser. Generally, these problems go away, when the user clears cache in the browser. Is there something we can do either in the code or in IIS7, to convince the browser to not used the cached files? In our weirdest case, we have one customer whose users hit our site, and get an old version of a js file. They clear cache, load the page, get the current version, and the page runs fine. Then they load the file again, and suddenly have the old version, again. Any ideas as to how that might be happening? I can think of three: The browser is somehow holding on to the old version, when we clear cache, and is putting it back in the cache, before the second page load. One of our servers has an old version of the file, and while the first page load after a clear cache pulls it from one of the servers with the current version, second and subsequent page loads pull it from the server that has the old version. The first load after a clear cache goes straight to our servers, while subsequent loads pull the file from the cache on the customer's web proxy. I have to say, all three of those scenarios seem outlandishly unlikely, but it's a repeatable behavior. Any ideas?

  Read the article

• Wires from fan on side panel - where do they connect?

  - by Mick

  The side panel of my desktop PC has a small fan built in. There were two wires, one red one black that connected inside the PC. Unfortunately I had the bolts removed and the side door fell off ripping the cables such that the main length of cable remains attached to the fan. So there must be two short stubs of broken cable somewhere - but I can't find them! Any ideas where I should look? I can't see anything on the motherboard. the PC is running perfectly well - but I now have the side open to make sure the air can circulate. EDIT: The motherboard appears to be an "Asus P6T SE" EDIT: The manual shows the location of two "chassis fan" connectors. One is being used by a big chassis fan on the back face of the PC (underneath the pwer supply). The other appears to be unused - there is no stub of a connector with wires - its just the bare pins sticking directly out of the motherboard. There is also an unused "pwr_fan" connector. Would it be ok to simply connect the black and red wires from the fan to the black and red parts of a molex adapter?

  Read the article

• Windows Update broke Wirless driver - Can't get it working again

  - by private_meta

  I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

  Read the article

• Pc freezes then wont boot. The fans spin, but HDD activity light is off

  - by Stuart

  I'm having a problem with my PC and this isn't the first time it's happened. For a few days now, when I turned my PC on, it didn't immediately start to boot up. The monitor said "No signal" and the machine just sat there although the power light was on and the fans were running. Then, after a few minutes, it would begin to boot as if nothing was wrong. Today I started my machine and it ran ok for about 10 minutes. Then the whole thing froze up and I had to shut it down and restart by holding the power button. When it rebooted, the same thing happened again and again and now finally it wont boot up at all. This happened before about 8 months ago. I ended up taking it to the shop after getting a blue screen. They replaced the HDD and upgraded it to windows 7 and it has worked fine since then. However, they charged an arm and a leg for the work and I dont want to have to go back there again. As this is a recurring fault I figure its a mechanical problem of some sort but I'm not sure what. Any ideas? Thanks for your help.

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• Bind9 not doing anything with forwarded query responses?

  - by Rykaro

  I have a Bind DNS server that is the local production DNS server and a Windows 2008 R2 domain controller which provides DNS for a lab environment with the domain xyz.lab. I've configured the Bind DNS to forward DNS requests for the domain xyz.lab to the Windows DNS server with this config: zone "xyz.lab" { type forward; forward only; forwarders { x.x.x.x; }; }; zone "x.x.x.in-addr.arpa" { type forward; forward only; forwarders { x.x.x.x; }; }; And Bind options are (the all_internal acl includes the subnets of both the production and lab networks as well as the loopback of the bind server): allow-query { all_internal; }; allow-recursion { all_internal; }; allow-transfer { none; }; notify no; minimal-responses yes; version "unknown"; Unfortunately, when I do an nslookup or dig on the bind server for a host on the lab domain, the request times out. The logs on the Windows 2008 DNS server show it receiving the query and responding to it and a network packet trace shows the query responses arriving at the Bind DNS server. The servers reside on the same switch with a router providing connectivity between the layer 3 subnets (production and lab are on different subnets) and there is a round trip time of between 3ms and 5ms on pings between the two servers, so I don't think there is an issue with latency causing a timeout of the query. In summary a query-response arrives back at the Bind server and the nslookup/dig times-out. Why does the Bind DNS not seem to be doing anything with the query responses when it receives them?

  Read the article

• Asterisk relay between multiple subnets

  - by immoune

  I wonder what's the best way to go when you have phones on multiple networks which are not directly reachable. I have 3 networks 10.3.x.x 10.6.x.x 10.17.x.x My asterisk server resides on the 10.3.0.5 IP. The machines from the 10.6 and 10.17 networks are routed here through VPN tunnels. At this point we don't talk about NAT anywhere on the network just pure routing. Since the 10.3.0.5 PBX has routes back to all the subnet's it has no problem to communicate with softphones/hardphones from these ranges. The problem comes from that Asterisk (as far as I understand) only responsible for the SIP communication part not the Audio/Video transmission which is in P2P fashion done between the devices. So although a client using sipdroid from 10.6.x.x is able to connect to the pbx (10.3.0.5) and dial a bria client on the 10.17.x.x network once the phone rings out and the call establishes no audio will be transmitted simply because it has no way to directly connect there. For this there are multiple solutions described in this text: http://msdn.microsoft.com/en-us/library/ee480411%28v=winembedded.60%29.aspx What I would prefer is to keep these networks segregated as they are now. What would be the best solution? Is it possible to actually relay through all the audio/video information through the Asterisk server? That would be the best in my case, I using Astlinux there which has a lot of other parts. Thanks

  Read the article

• Google Chrome 'ruined' after someone else logged in

  - by MHJ96

  Google Chrome was the default browser that came with my laptop. I have a Google account which I was logged into Chrome with. Someone else logged into my chrome using their account which has resulted in everything being lost. I logged in again to find my theme, bookmarks, history, most visited sites were gone and now instead of 'piling up' under the symbol already pinned to the Windows 7 task bar it opens a second symbol on the taskbar and 'piles up' under that instead which has never happened before. I have tried unpinning and repinning which didn't work. I have tried syncing my account numerous times to no avail, I have searched high and low on the Chrome forums for any kind of answer. I have tried accessing that thing in documents to try and recover my bookmarks but I can't find them (I had hidden files enabled etc etc). I really really want it back how it was as I had a lot of bookmarked sites and quick access to sites and everything was how i used it, and I hate that it now opens a new icon on the taskbar.

  Read the article

• Windows 7, Black screen with cursor, impossible to logon

  - by PJC

  First - I have gone through as many possible solutions I've found here and elsewhere. [Edit - to describe the issue in more detail, the PC appears to boot correctly, but instead of the logon screen, I have been getting a black screen WITH the pointer cursor, and it responds correctly to the mouse. Pressing CTL-ALT-DEL brings up the logon screen's background, but with no logon area nor any other content. This screen was at the full resolution before I uninstalled the graphics driver in safe-mode.] I also just ran a full up-to-date AVG scan from boot media. [Edit - the AVG scan, which was updated to today's virus signatures, found no issues at all.] So - steps I've tried: Safe Boot, Restore from before the issue - done, no help. Uninstall the graphics driver - done, now i have a 1024x768 fallback screen, still no way in. sfc /scannow - only doable from Safe boot obviously, but no change. [Edit - booting from restore media, performing a startup repair and...]Restore further back - restored to 2 days ago, and I'd had many reboots since then with no problem. Enable autologin to try to get beyond the login screen - done, doesn't work. It seems the best advice is complete reinstall, but I really don't want to do that because it'll take 3-4 days to add all the apps I use. Some key points to note - in both states - before and after removing the video driver, I always had a mouse cursor on the screen. CTL-ALT-DEL flashes up the login background, but no login info. I can (and often do) reinstall from scratch, but was at a fairly stable state before this, and would prefer not to. -Paul

  Read the article

• Specific issue on data pump API in oracle

  - by Median Hilal

  I have a client/server architecture. Using an Oracle dbms on the database server side. I need to perform a user-triggered (from client side) backup of the database, where the best way to perform that is using a stored procedure on the server side which the client may call, as the client has no oracle tools to perform the backup. I've searched thorough inside available solutions and have found that using a stored procedure is the best way. Well, then I found that using oracle data pump API is the best way to use inside a PL/SQl stored procedure. My specific questions about the API are... I would like to ask about two issues ... ---- The first ----- the detach function to detach the handler, is it necessary to be used at the end of the procedure? and what if I don't use it? I read the Oracle documentation but I didn't get their point, they say it doesn't terminate the job but indicates that the user is not interested in it, an when I use detach at the end of my procedure the exported .dmp file disappears. ---- The second ----- to perform a user (client side) triggered back up as the modification are only to the data, I used TABLE parameter for the export operation. But the version parameter... what should it be? I also read the documentation but couldn't determine what I need (LATEST or COMPATIBLE) ? Thanks

  Read the article

• strange raid5 issue:

  - by 8steve8

  ok so ive had a 4x2TB(samsung HD204UI w/firmware patch) raid5 array working normally for about a month. It was in a h57 gigabyte motherboard using the intel raid with windows 7 x64. Today I got an intel h67 motherboard, so I upgraded the intel raid drivers to 10.1.0.1008 from 9.6.0.1014, and I'm not sure if i checked after a reboot, but it caused no problems. I swapped in the new dh67 motherboard, and my array status was "failed". 2 of the 4 drives listed themselves as members, while the other two drives listed themselves as non-members. I tried going back to the old h57 mobo, and downgrading the raid drivers, but the issue remains. It's not port dependent, 2 of the drives always come up as non-members regardless of what port or motherboard they are plugged into. the screenshot should show that the SNs match, which begs the question why the software doesn't realize the drive is a member of the array: http://img837.imageshack.us/img837/6145/both.png I'd like to know if anyone has experienced anything similar, and what should i do, can i force the drive to be recognized as a member (without wiping data)?

  Read the article

• Multiple Screen - Keyboard Sharing

  - by nhbdesign

  I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

  Read the article

• Referer is passed from HTTPS to HTTP in some cases... How?

  - by ravisorg

  In theory browsers do not pass on referer information from HTTPS to HTTP sites. And in my experience this has always been true. But I just found an exception, and I want to understand why it works so I can use it as well. Search for "what is my referer" on https://www.google.ca/ eg: https://www.google.ca/search?q=what+is+my+referer There are a few sites that will show referer. They all seem to "work" when they shouldn't. For example, click the www.whatismyreferer.com one. I get: Your referer: https://www.google.ca/ Note that sometimes, rarely, I get "no referer" as the result. Go back and click the link again and it'll "work" the next time. This should not happen. www.whatismyreferer.com is a non-HTTPS site. The referer header should not be being passed, but it is. What's going on here, and how can I do the same from my HTTPS site to the HTTP sites I'm linking to?

  Read the article

• Bootable ISO to USB stick xp quickest method

  - by brux

  My dog took a leak on my PC when I went out (ye funny), now it reandomly restarts - I'm convinced the HDD is failing because the Windows seagate diagnostic program fails on a few tests. I want to run this prior to windows in an attempt to try and recover sectors, the program includes an iso which can be written to cd and booted, but i dont have any cd's. I tried using unetbootin to create the bootable usb from the iso file (SeaToolsDOS222ALL.576.ISO) but it doesnt work. When i boot from the usb hdd unetbootin loads with "default" in the menu. No joy booting though. I checked the usb hdd in windows and all the files are there, extracted from the iso file, wont boot though. Any ideas? Im using windows xp. More info - when the computer restarts (like i just did now) it constantly reaches the end of POST and then restarts in infinite loop. If I pull the power cable out it will get back into windows, the longer i leave it between attempts, the longer I am able to stay in windows until it restarts. i.e if i leave the power cable out 5 minutes it will stay operable for longer than if i had left it out for only a few seconds.

  Read the article

• Can I use Upstart to start a script which requires the user's X session?

  - by ledneb

  I wrote a script which greps through the output of synclient to determine whether a laptop's touchpad has miraculously turned itself off (Ubuntu seems to /love/ doing this recently) and, if so, turns it back on. The script is something like this: #!/bin/bash while true ; do if [ `synclient | grep -e"TouchpadOff[\s]*1" | wc -l` -ge 1 ] ; then synclient TouchpadOff=0 fi sleep(3) done (I don't have the laptop to hand right now but you get the point! I will update later when I'm at my laptop if that's incorrect) So I tried running this as an upstart script so my touchpad can heal itself without any interaction. But it seems synclient doesn't find the current user's X session when my script is upstart'ed. I tried running it by using something like su -c myscript.sh ledneb in my script stanza, but to no avail. Should I be looking in the direction of /etc/X11/xinit/xinitrc rather than upstart? Is there a proper way to have this script run in the context of the current (or even a hard-coded) user's x session?

  Read the article

• Creating MS Word 2010 Relative Links?

  - by leeand00

  Okay here is what I've tried so far for creating relative links in my MS Word Documents. In my document from the ribbon I select the File tab. I then select Info from the side bar. Click the properties drop down from the right hand column. (a bit difficult to find initially, since it looks like text not a drop down, but it's there). Click Advanced Properties The <document-name>.docx Properties Dialog Appears I enter .\ to specify that I want a relative path for the links in my document. I click OK. I go back into my document select some text and attempt to make a link out of it clicking the Insert tab of the ribbon, and then clicking Hyperlink. I then select a document from the current folder, and strip the full path from it, leaving just the name of the .docx file to which I wish to link. Then I click OK. The link appears, I try to click it using Ctrl+Click. I am informed that the address of the site is not valid. Check the address and try again. What could I possibly be doing wrong here? I just want a relative link. It's so easy in to do this in HTML.

  Read the article

• Windows 7 - "Magic" frequent folder

  - by TheAdamGaskins

  Every week, I export an mp3 file from audacity into a folder with that day's date (e.g. this past sunday I exported the file to a folder named 20130609). Then I close everything and that's it for a while. Then, I come back a few hours later to upload the file to ftp. I usually have some folders open, so to open a new one, I right click on the folder icon on the taskbar... to open a new folder window and browse to this folder I just created, right? Well I look up a little bit and: So I click it and upload the file, and it actually saves me 30 seconds, which is really awesome... but what in the world? It happens every single week without fail. I create the folder inside the audacity export window. The folder stays on the frequent list until I create a new folder the following week. This was definitely not an advertised feature of Windows 7, and it's extremely handy... but it really just seems like magic to me. How does it work?

  Read the article

< Previous Page | 826 827 828 829 830 831 832 833 834 835 836 837  | Next Page >