Search Results

Search found 22961 results on 919 pages for 'memory management'.

Page 831/919 | < Previous Page | 827 828 829 830 831 832 833 834 835 836 837 838  | Next Page >

• How do I efficiently parse a CSV file in Perl?

  - by Mike

  I'm working on a project that involves parsing a large csv formatted file in Perl and am looking to make things more efficient. My approach has been to split() the file by lines first, and then split() each line again by commas to get the fields. But this suboptimal since at least two passes on the data are required. (once to split by lines, then once again for each line). This is a very large file, so cutting processing in half would be a significant improvement to the entire application. My question is, what is the most time efficient means of parsing a large CSV file using only built in tools? note: Each line has a varying number of tokens, so we can't just ignore lines and split by commas only. Also we can assume fields will contain only alphanumeric ascii data (no special characters or other tricks). Also, i don't want to get into parallel processing, although it might work effectively. edit It can only involve built-in tools that ship with Perl 5.8. For bureaucratic reasons, I cannot use any third party modules (even if hosted on cpan) another edit Let's assume that our solution is only allowed to deal with the file data once it is entirely loaded into memory. yet another edit I just grasped how stupid this question is. Sorry for wasting your time. Voting to close.

  Read the article

• "for" loop from program 7.6 from Kochan's "Programming in Objective-C"

  - by Mr_Vlasov

  "The sigma notation is shorthand for a summation. Its use here means to add the values of 1/2^i, where i varies from 1 to n. That is, add 1/2 + 1/4 + 1/8 .... If you make the value of n large enough, the sum of this series should approach 1. Let’s experiment with different values for n to see how close we get." #import "Fraction.h" int main (int argc, char *argv[]) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; Fraction *aFraction = [[Fraction alloc] init]; Fraction *sum = [[Fraction alloc] init], *sum2; int i, n, pow2; [sum setTo: 0 over: 1]; // set 1st fraction to 0 NSLog (@"Enter your value for n:"); scanf ("%i", &n); pow2 = 2; for (i = 1; i <= n; ++i) { [aFraction setTo: 1 over: pow2]; sum2 = [sum add: aFraction]; [sum release]; // release previous sum sum = sum2; pow2 *= 2; } NSLog (@"After %i iterations, the sum is %g", n, [sum convertToNum]); [aFraction release]; [sum release]; [pool drain]; return 0; } Question: Why do we have to create additional variable sum2 that we are using in the "for" loop? Why do we need "release previous sum" here and then again give it a value that we just released? : sum2 = [sum add: aFraction]; [sum release]; // release previous sum sum = sum2; Is it just for the sake of avoiding memory leakage? (method "add" initializes a variable that is stored in sum2)

  Read the article

• GUI for server-client program

  - by sksingh73

  I am making a server-client application in c++. In this i am also using shared memory & file read-write operations. my program is completely ready & i now wants to make a gui for it. someone suggested me to go for QT4, but when i tried it, i found i have to re-write 80% of the code because QT has got its own classes & variable. i don't want to do it. i want suggestions from you on this regard. my requirements for gui are very simple i.e there will be a main form, which will have two text boxes in which all messages being sent & received by client & server should be shown. there should be another lineedit box, through which i can send the messages to the other end server. I don't know how to make this gui. someone suggested tcl/tk, other suggested me use php/swig. i am not sure how to go about this. my only requirement is that i want to make this simple gui with minimum of changes in my code. THANX

  Read the article

• Optimized 2D Tile Scrolling in OpenGL

  - by silicus

  Hello, I'm developing a 2D sidescrolling game and I need to optimize my tiling code to get a better frame rate. As of right now I'm using a texture atlas and 16x16 tiles for 480x320 screen resolution. The level scrolls in both directions, and is significantly larger than 1 screen (thousands of pixels). I use glTranslate for the actual scrolling. So far I've tried: Drawing only the on-screen tiles using glTriangles, 2 per square tile (too much overhead) Drawing the entire map as a Display List (great on a small level, way to slow on a large one) Partitioning the map into Display Lists half the size of the screen, then culling display lists (still slows down for 2-directional scrolling, overdraw is not efficient) Any advice is appreciated, but in particular I'm wondering: I've seen Vertex Arrays/VBOs suggested for this because they're dynamic. What's the best way to take advantage of this? If I simply keep 1 screen of vertices plus a bit of overdraw, I'd have to recopy the array every few frames to account for the change in relative coordinates (shift everything over and add the new rows/columns). If I use more overdraw this doesn't seem like a big win; it's like the half-screen display list idea. Does glScissor give any gain if used on a bunch of small tiles like this, be it a display list or a vertex array/VBO Would it be better just to build the level out of large textures and then use glScissor? Would losing the memory saving of tiling be an issue for mobile development if I do this (just curious, I'm currently on a PC)? This approach was mentioned here Thanks :)

  Read the article

• I want to build a Google-friendly web app, where should I start?

  - by ronii

  I have only very basic experience with HTML/CSS and have quite a bit of experience with testing software and web apps from a consumer perspective. I'd love to launch a web application that plays nicely with Google services, similar to some of the apps you'd find on the Google Apps Marketplace, such as ManyMoon, time to note, Socialwok, etc. I'm a huge Google fan and would like to build something that's well integrated with other Google services. If you were a total beginner and wanted to build a complex app like one of examples above (project management, CRM, etc), where would you start? If you worked your ass off 18 hours a day, 24/7, how fast could you do it? I've dabbled into various languages and development frameworks, and read about which apps are using what languages but it's hard to figure out what would be most beneficial to jump into. Ruby on Rails, PHP, Google Web Toolkit, AppEngine. The list goes on and on. I want to be able to build and launch my own scalable web app. Thanks.

  Read the article

• What is the correct install process to setup Node.js with Windows Azure Emulator

  - by PazoozaTest Pazman

  This question is related to this question: Node.js running under IIS Express Keeps Crashing to which I need help with reinstalling and getting node.js up and running in windows emulator working. Hello I am reinstalling my machine: Toshiha Laptop 2 GB Ram 32 bit processor What is the correct procedure from start to finish to get node.js development working, so far nothing has worked and the emulator (IIS Express) worker processor keeps crashing. No matter how many instances they all end up crashing. Up until two weeks ago my node development was working fine, but I had to do a reinstall, and since then I haven't been doing any node.js development on windows emulator because the latest June 2012 Azure SDK for Node.js is buggy. These are the steps I have taken: 1) Reformat HD 2) Insert Windows 7 N SP1 CD 3) Reboot machine into CD installation 4) Follow and wait until Windows 7 installed 5) Run Add/Remove programs + enable IIS + IIS management tools 6) Run Windows Update (installed about 53 updates) 7) Go here http://www.windowsazure.com/en-us/develop/nodejs/ 8) Click Windows Installer June 2012 and install Windows Azure SDK for Node.js - June 2012 9) Run Azure Powershell 10) Navigate to c:\node\testSite\webrole1 11) launch site: start-azureemulator -launch 12) Play around on website (then crash!) Problem signature: Problem Event Name: APPCRASH Application Name: iisexpress.exe Application Version: 8.0.8298.0 Application Timestamp: 4f620349 Fault Module Name: iiscore.dll Fault Module Version: 8.0.8298.0 Fault Module Timestamp: 4f63b65c Exception Code: c0000005 Exception Offset: 00021767 OS Version: 6.1.7601.2.1.0.256.28 Locale ID: 1033 Additional Information 1: f66d Additional Information 2: f66d807b515d6b2dc6f28f66db769a01 Additional Information 3: 7b2f Additional Information 4: 7b2f6797d07ebc2c23f2b227e779722e Am I missing a step in my resintall process? Do I have all the required files to do node.js windows azure emulator development? Why is IIS Express crashing all the time? Can I still do node.js windows azure emulator development without using IIS Express and use my local Windows 7 N (SP1) IIS 7.x that comes shipped?

  Read the article

• std::map keys in C++

  - by Soumava

  I have a requirement to create two different maps in C++. The Key is of type CHAR * and the Value is a pointer to a struct. I am filling 2 maps with these pairs, in separate iterations. After creating both maps I need find all such instances in which the value of the string referenced by the CHAR * are same. For this i am using the following code : typedef struct _STRUCTTYPE { .. } STRUCTTYPE, *PSTRUCTTYPE; typedef pair {CHAR *,PSTRUCTTYPE} kvpair; .. CHAR *xyz; PSTRUCTTYPE abc; after filling the information; Map.insert (kvpair(xyz,abc)); the above is repeated x times for the first map, and y times for the second map. after both are filled out; std::map {CHAR *, PSTRUCTTYPE} :: iterator Iter,findIter; for (Iter=iteratedMap-begin();Iter!=iteratedMap-end();mapIterator++) { char *key = Iter-first; printf("%s\n",key); findIter=otherMap-find(key); //printf("%u",findIter-second); if (findIter!=otherMap-end()) { printf("Match!\n"); } } The above code does not show any match, although the list of keys in both maps show obvious matches. My understanding is that the equals operator for CHAR * just equates the memory address of the pointers. My question is, what should i do to alter the equals operator for this type of key or could I use a different datatype for the string? *note : {} has been used instead of angle brackets as the content inside angle brackets was not showing up in the post.

  Read the article

• Rotate a linked list

  - by user408041

  I want to rotate a linked list that contains a number. 123 should be rotated to 231. The function created 23 but the last character stays empty, why? typedef struct node node; struct node{ char digit; node* p; }; void rotate(node** head){ node* walk= (*head); node* prev= (*head); char temp= walk->digit; while(walk->p!=NULL){ walk->digit=walk->p->digit; walk= walk->p; } walk->digit=temp; } How I create the list: node* convert_to_list(int num){ node * curr, * head; int i=0,length=0; char *arr=NULL; head = NULL; length =(int) log10(((double) num))+1; arr =(char*) malloc((length)*sizeof(char)); //allocate memory sprintf (arr, "%d" ,num); //(num, buf, 10); for(i=length;i>=0;i--) { curr = (node *)malloc(sizeof(node)); (curr)->digit = arr[i]; (curr)->p = head; head = curr; } curr = head; return curr; }

  Read the article

• Windows Service Start-Up Error 1069

  - by Gavin

  Hello, I am installing a new windows service coded in C# on a server. I installed the service fine on the server, but once i manually start up the service on a server, with the same login credentials that our other services use, i get the fatal error message notification: "Could not start the %service name% on Local Computer. Error 1069: The Service did not start due to a logon failure." I looked in the event log and i got a 7038 and 7000 event id error in that order. 7038 event id message: "The %service name% service was unable to log on as %login% with the currently configured password due to the following error: Logon failure: unknown user name or bad password. To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC)." 7000 event id message: "The %service name% service failed to start due to the following error: The service did not start due to a logon failure. " I have other services that are using the same exact login account and they work fine. Is there something simple I could be missing? Thanks

  Read the article

• Selecting row in SSMS causes Entity Framework 4 to Fail

  - by Eric J.

  I have a simple Entity Framework 4 unit test that creates a new record, saves it, attempts to find it, then deletes it. All works great, unless... ... I open up SQL Server Management Studio while stopped at a breakpoint in the unit test and execute a SELECT statement that returns the row I just created (not SELECT FOR UPDATE, not WITH (updlock), no transaction, just a plain SELECT). If I do that before attempting to find the row I just created, I don't find the row. If I instead do that after finding the row but before deleting the row, I do find the row but get an OptimisticConcurrencyException. This is consistently repeatable. Unit Test: [TestMethod()] public void CreateFindDeleteActiveParticipantsTest() { // Setup this test Participant utPart = CreateUTParticipant(); ctx.Participants.AddObject(utPart); ctx.SaveChanges(); // External SELECT Point #1: // part is null // Find participant Participant part = ParticipantRepository.Find(UT_SURVEY_ID, UT_TOKEN); Assert.IsNotNull(part, "Expected to find a participant"); // External SELECT Point #2: // SaveChanges throws OptimisticConcurrencyException // Cleanup this test ctx.Participants.DeleteObject(utPart); ctx.SaveChanges(); }

  Read the article

• Is programming overrated?

  - by aengine

  [Subjective and intended to be a community wiki] I am sorry for such an offensive question: But here are my arguments Most of the progress in "computing" has came from non-programming sources. i.e. People invented faster microprocessors and better routers and novel memory devices. I dont think on average people are writting more efficient programs than those written 10 years ago. And the newer and popular languages are infact slower than C. though speed is one of the lesser criterias. Most of the progress came from novel paradigms. Web, Internet, Cloud computing and Social networking are novel paradigms and did not involve progress in programming as such. Heck even facebook was written in PHP and not some extreme language. Though it did face scalability issues (same with twitter) but i believe money and better programmers (who came in much later) took care of that. Thus ideating capability trumped programming capability/ Even things like Map-Reduce, Column oriented database and Probablistic algorithms (E.g. bloom filters) came from hardcore Algorithms research, rather than some programming convention. Thus my final point is why programming skill is so overstressed? To point a recent example about how only 10% of programmers can "write code" (binary search) without debugging. Isnt it a bit hypocritical, considering your real successs lies in coming up with better algorithm or a novel feature rather than getting right first time???

  Read the article

• Gtk: How can I get a part of a file in a textview with scrollbars relating to the full file

  - by badgerman1

  I'm trying to make a very large file editor (where the editor only stores a part of the buffer in memory at a time), but I'm stuck while building my textview object. Basically- I know that I have to be able to update the text view buffer dynamically, and I don't know hot to get the scrollbars to relate to the full file while the textview contains only a small buffer of the file. I've played with Gtk.Adjustment on a Gtk.ScrolledWindow and ScrollBars, but though I can extend the range of the scrollbars, they still apply to the range of the buffer and not the filesize (which I try to set via Gtk.Adjustment parameters) when I load into textview. I need to have a widget that "knows" that it is looking at a part of a file, and can load/unload buffers as necessary to view different parts of the file. So far, I believe I'll respond to the "change_view" to calculate when I'm off, or about to be off the current buffer and need to load the next, but I don't know how to get the scrollbars to have the top relate to the beginning of the file, and the bottom relate to the end of the file, rather than to the loaded buffer in textview. Any help would be greatly appreciated, thanks!

  Read the article

• Question on passing a pointer to a structure in C to a function?

  - by worlds-apart89

  Below, I wrote a primitive singly linked list in C. Function "addEditNode" MUST receive a pointer by value, which, I am guessing, means we can edit the data of the pointer but can not point it to something else. If I allocate memory using malloc in "addEditNode", when the function returns, can I see the contents of first-next ? Second question is do I have to free first-next or is it only first that I should free? I am running into segmentation faults on Linux. #include <stdio.h> #include <stdlib.h> typedef struct list_node list_node_t; struct list_node { int value; list_node_t *next; }; void addEditNode(list_node_t *node) { node->value = 10; node->next = (list_node_t*) malloc(sizeof(list_node_t)); node->next->value = 1; node->next->next = NULL; } int main() { list_node_t *first = (list_node_t*) malloc(sizeof(list_node_t)); first->value = 1; first->next = NULL; addEditNode(first); free(first); return 0; }

  Read the article

• Question about array subscripting in C#

  - by Michael J

  Back in the old days of C, one could use array subscripting to address storage in very useful ways. For example, one could declare an array as such. This array represents an EEPROM image with 8 bit words. BYTE eepromImage[1024] = { ... }; And later refer to that array as if it were really multi-dimensional storage BYTE mpuImage[2][512] = eepromImage; I'm sure I have the syntax wrong, but I hope you get the idea. Anyway, this projected a two dimension image of what is really single dimensional storage. The two dimensional projection represents the EEPROM image when loaded into the memory of an MPU with 16 bit words. In C one could reference the storage multi-dimensionaly and change values and the changed values would show up in the real (single dimension) storage almost as if by magic. Is it possible to do this same thing using C#? Our current solution uses multiple arrays and event handlers to keep things synchronized. This kind of works but it is additional complexity that we would like to avoid if there is a better way.

  Read the article

• Caching vector addition over changing collections

  - by DRMacIver

  I have the following setup: I have a largish number of uuids (currently about 10k but expected to grow unboundedly - they're user IDs) and a function f : id - sparse vector with 32-bit integer values (no need to worry about precision). The function is reasonably expensive (not outrageously so, but probably on the order of a few 100ms for a given id). The dimension of the sparse vectors should be assumed to be infinite, as new dimensions can appear over time, but in practice is unlikely to ever exceed about 20k (and individual results of f are unlikely to have more than a few hundred non-zero values). I want to support the following operations efficiently: add a new ID to the collection invalidate an existing ID retrieve sum f(id) in O(changes since last retrieval) i.e. I want to cache the sum of the vectors in a way that's reasonable to do incrementally. One option would be to support a remove ID operation and treat invalidation as a remove followed by an add. The problem with this is that it requires us to keep track of all the old values of f, which is expensive in space. I potentially need to use many instances of this sort of cached structure, so I would like to avoid that. The likely usage pattern is that new IDs are added at a fairly continuous rate and are frequently invalidated at first. Ids which have been invalidated recently are much more likely to be invalidated again than ones which have remained valid for a long time, but in principle an old Id can still be invalidated. Ideally I don't want to do this in memory (or at least I want a way that lets me save the result to disk efficiently), so an idea which lets me piggyback off an existing DB implementation of some sort would be especially appreciated.

  Read the article

• Python 2.6 does not like appending to existing archives in zip files

  - by user313661

  Hello, In some Python unit tests of a program I'm working on we use in-memory zipfiles for end to end tests. In SetUp() we create a simple zip file, but in some tests we want to overwrite some archives. For this we do "zip.writestr(archive_name, zip.read(archive_name) + new_content)". Something like import zipfile from StringIO import StringIO def Foo(): zfile = StringIO() zip = zipfile.ZipFile(zfile, 'a') zip.writestr( "foo", "foo content") zip.writestr( "bar", "bar content") zip.writestr( "foo", zip.read("foo") + "some more foo content") print zip.read("bar") Foo() The problem is that this works fine in Python 2.4 and 2.5, but not 2.6. In Python 2.6 this fails on the print line with "BadZipfile: File name in directory "bar" and header "foo" differ." It seems that it is reading the correct file bar, but that it thinks it should be reading foo instead. I'm at a loss. What am I doing wrong? Is this not supported? I tried searching the web but could find no mention of similar problems. I read the zipfile documentation, but could not find anything (that I thought was) relevant, especially since I'm calling read() with the filename string. Any ideas? Thank you in advance!

  Read the article

• Get info from multiple files, match it and then display to end user, what is fastest?

  - by Patrick

  Hi, I need to build a website where we display data that is refreshed every 5minutes in a text file with a | separator. I currently use Java to do this. What I do now: I grab the textfile for every request through the website and process it and then display the data to the end user, this works fine, since Java can go through like 5000 lines of data fast, and when I filter it it is still extremely fast. However now the management wants the following: They added 3 textfiles with the | separator to it, and now want me to also read those files and match the information on certain fields, and if there is a match also display that information to the end user. I think soon enough, although Java is fast, I will run into trouble when 10 people want that information and I have to run through 4 total files matching the information. What can I do to make this process super fast? My Creative solutions so far: -Leave it this way, since Java is fast and end users can wait (probably less then 1second) -Have a background process that dumps new data into a MySQL database every 5minutes, since databases are extremely good at getting the same data from multiple tables. Thank you!

  Read the article

• Drawing line graphics leads Flash to spiral out of control!

  - by drpepper

  Hi, I'm having problems with some AS3 code that simply draws on a Sprite's Graphics object. The drawing happens as part of a larger procedure called on every ENTER_FRAME event of the stage. Flash neither crashes nor returns an error. Instead, it starts running at 100% CPU and grabs all the memory that it can, until I kill the process manually or my computer buckles under the pressure when it gets up to around 2-3 GB. This will happen at a random time, and without any noticiple slowdown beforehand. WTF? Has anyone seen anything like this? PS: I used to do the drawing within a MOUSE_MOVE event handler, which brought this problem on even faster. PPS: I'm developing on Linux, but reproduced the same problem on Windows. UPDATE: You asked for some code, so here we are. The drawing function looks like this: public static function drawDashedLine(i_graphics : Graphics, i_from : Point, i_to : Point, i_on : Number, i_off : Number) : void { const vecLength : Number = Point.distance(i_from, i_to); i_graphics.moveTo(i_from.x, i_from.y); var dist : Number = 0; var lineIsOn : Boolean = true; while(dist < vecLength) { dist = Math.min(vecLength, dist + (lineIsOn ? i_on : i_off)); const p : Point = Point.interpolate(i_from, i_to, 1 - dist / vecLength); if(lineIsOn) i_graphics.lineTo(p.x, p.y); else i_graphics.moveTo(p.x, p.y); lineIsOn = !lineIsOn; } } and is called like this (m_graphicsLayer is a Sprite): m_graphicsLayer.graphics.clear(); if (m_destinationPoint) { m_graphicsLayer.graphics.lineStyle(2, m_fixedAim ? 0xff0000 : 0x333333, 1); drawDashedLine(m_graphicsLayer.graphics, m_initialPos, m_destinationPoint, 10, 10); }

  Read the article

• Why does a MFC application behaves mysteriously in encrypted hard drive environment.

  - by MauriceL

  I'm working on a bug where I have an MFC application that does weird things when installed in when Sophos Safeguard hard drive encryption is installed. I'm sorry to be so vague here, but I'm writing this away from the office so this is all from my (poor) memory. Three things I've noticed: AfxGetResourceHandle() doesn't return a consistent resource handle. There is a single case where we try to load a string resource, and for some reason, the resource handle that we get from this method is different to all the other stings. Can't construct a CDocumentTemplate. There is a trace error which I cant seem to recall. Will edit and post when I'm in tomorrow. This behaviour appears to manifest in a Visual Studio 2005 version of the project, but not a Visual Studio 2008 version. Unfortunately moving to the 2008 version is not an option. The bug is not always reproducable if I step through with a debugger. Also, bringing up debug message boxes changes the behaviuor, which leads me to think that either there is some kind of race condition going on with the way MFC events are being handled, but I'm not sure how I'll ever know for sure, or even what I can do about it if I did. I think there's some underlying reason that the app is behaving weirdly, but what I've posted are more symptoms. Can anyone think of what I should check for? I've run Windows update on the test environment to ensure everything was up to date, and I've examined the process in procmon to see if the disk encryption stuff was getting in the way and conflicting with files - it didn't appear to be, but it does appear to be involved in some way as our app accesses Sophos related paths in the temp directory.

  Read the article

• Find messages from certain key till certain key while being able to remove stale keys.

  - by Alfred

  My problem Let's say I add messages to some sort of datastructure: 1. "dude" 2. "where" 3. "is" 4. "my" 5. "car" Asking for messages from index[4,5] should return: "my","car". Next let's assume that after a while I would like to purge old messages because they aren't useful anymore and I want to save memory. Let's say at time x messages[1-3] became stale. I assume that it would be most efficient to just do the deletion once every x seconds. Next my datastructure should contain: 4. "my" 5. "car" My solution? I was thinking of using a concurrentskiplistset or concurrentskiplist map. Also I was thinking of deleting the old messages from inside a newSingleThreadScheduledExecutor. I would like to know how you would implement(efficiently/thread-safe) this or maybe use a library?

  Read the article

• C# cross thread dialogue co-operation

  - by John Attridge

  K I am looking at a primarily single thread windows forms application in 3.0. Recently my boss had a progress dialogue added on a separate thread so the user would see some activity when the main thread went away and did some heavy duty work and locked out the GUI. The above works fine unless the user switches applications or minimizes as the progress form sits top most and will not disappear with the main application. This is not so bad if there are lots of little operations as the event structure of the main form catches up with its events when it gets time so minimized and active flags can be checked and thus the dialog thread can hide or show itself accordingly. But if a long running sql operation kicks off then no events fire. I have tried intercepting the WndProc command but this also appears queued when a long running sql operation is executing. I have also tried picking up the processes, finding the current app and checking various memory values isiconic and the like inside the progress thread but until the sql operation finishes none of these get updated. Removing the topmost causes the dialog to disappear when another app activates but if the main app is then brought back it does not appear again. So I need a way to find out if the other thread is minimized or no longer active that does not involve querying the actual thread as that locks until the sql operation finishes. Now I know that this is not the best way to write this and it would be better to have all the heavy processing on separate threads leaving the GUI free but as this is a huge ancient legacy app the time to re-write in that fashion will not be provided so I have to work with what I have got. Any help is appreciated

  Read the article

• Parallel doseq for Clojure

  - by andrew cooke

  I haven't used multithreading in Clojure at all so am unsure where to start. I have a doseq whose body can run in parallel. What I'd like is for there always to be 3 threads running (leaving 1 core free) that evaluate the body in parallel until the range is exhausted. There's no shared state, nothing complicated - the equivalent of Python's multiprocessing would be just fine. So something like: (dopar 3 [i (range 100)] ; repeated 100 times in 3 parallel threads... ...) Where should I start looking? Is there a command for this? A standard package? A good reference? So far I have found pmap, and could use that (how do I restrict to 3 at a time? looks like it uses 32 at a time - no, source says 2 + number of processors), but it seems like this is a basic primitive that should already exist somewhere. clarification: I really would like to control the number of threads. I have processes that are long-running and use a fair amount of memory, so creating a large number and hoping things work out OK isn't a good approach (example which uses a significant chunk available mem). update: Starting to write a macro that does this, and I need a semaphore (or a mutex, or an atom i can wait on). Do semaphores exist in Clojure? Or should I use a ThreadPoolExecutor? It seems odd to have to pull so much in from Java - I thought parallel programming in Clojure was supposed to be easy... Maybe I am thinking about this completely the wrong way? Hmmm. Agents?

  Read the article

• Session scoped bean as class attribute of Spring MVC Controller

  - by Sotirios Delimanolis

  I have a User class: @Component @Scope("session") public class User { private String username; } And a Controller class: @Controller public class UserManager { @Autowired private User user; @ModelAttribute("user") private User createUser() { return user; } @RequestMapping(value = "/user") public String getUser(HttpServletRequest request) { Random r = new Random(); user.setUsername(new Double(r.nextDouble()).toString()); request.getSession().invalidate(); request.getSession(true); return "user"; } } I invalidate the session so that the next time i got to /users, I get another user. I'm expecting a different user because of user's session scope, but I get the same user. I checked in debug mode and it is the same object id in memory. My bean is declared as so: <bean id="user" class="org.synchronica.domain.User"> <aop:scoped-proxy/> </bean> I'm new to spring, so I'm obviously doing something wrong. I want one instance of User for each session. How?

  Read the article

• Need help getting parent reference to child view controller

  - by Andy

  I've got the following code in one of my view controllers: - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { switch (indexPath.section) { case 0: // "days" section tapped { DayPicker *dayPicker = [[DayPicker alloc] initWithStyle:UITableViewStylePlain]; dayPicker.rowLabel = self.activeDaysLabel; dayPicker.selectedDays = self.newRule.activeDays; [self.navigationController pushViewController:dayPicker animated:YES]; [dayPicker release]; break; ... Then, in the DayPicker controller, I do some stuff to the dayPicker.rowLabel property. Now, when the dayPicker is dismissed, I want the value in dayPicker.rowLabel to be used as the cell.textLabel.text property in the cell that called the controller in the first place (i.e., the cell label becomes the option that was selected within the DayPicker controller). I thought that by using the assignment operator to set dayPicker.rowLabel = self.activeDaysLabel, the two pointed to the same object in memory, and that upon dismissing the DayPicker, my first view controller, which uses self.activeDaysLabel as the cell.textLabel.text property for the cell in question, would automagically pick up the new value of the object. But no such luck. Have I missed something basic here, or am I going about this the wrong way? I originally passed a reference to the calling view controller to the child view controller, but several here told me that was likely to cause problems, being a circular reference. That setup worked, though; now I'm not sure how to accomplish the same thing "the right way." As usual, thanks in advance for your help.

  Read the article

• How to Sort a TreeList in Sitecore 6 in the Source

  - by Scott

  My team uses Sitecore 6 as content management system and then .Net to interface with Sitecore API. In many of our templates we make use of a Treelist. When adding a new item to the selected items Treelist it automatically puts the item at the bottom of the list. In some lists they get very large. In most cases end users would like to see these lists sorted descending by a Date field that is part of the templates that can be added as selected to the Treelist. Programmatically on the .Net side its very easy to handle this using Linq OrderByDescending and all displays great in the site to visitors. What I am trying to figure out is how to get it to display the same in Sitecore Content Editor. I've not found anything from Google search other than there seems to be a SortBy you can specify in the source but I tried this and can't get it to have any effect. Has anyone dealt with this before? Again, main goal is to sort items in a Treelist in the Sitecore Content Editor itself. Thanks for any input anyone has.

  Read the article

< Previous Page | 827 828 829 830 831 832 833 834 835 836 837 838  | Next Page >