Search Results

Search found 37414 results on 1497 pages for 'open port'.

Page 833/1497 | < Previous Page | 829 830 831 832 833 834 835 836 837 838 839 840  | Next Page >

• Windows Server 2008 R2 install reboots unexpectedly during "Completing installation" phase

  - by knda

  I am attempting to install Windows Server 2008 R2 onto a Cisco UCS C201 M2 rack mounted server but am having major difficulties and wondering if anyone has some insight or items they could recommend for me to look at to get this one resolved. Installation is being attempted via the Cisco remote console (using CIMC's Virtual dvd-rom).. following the first phase of Setup where the installation files are copied to the target hard drive, then a reboot occurs to load Setup from the HDD, mid-way in the "Completing Installation" phase the system then reboots unexpectedly. System configuration Cisco UCS C201 M2 (2RU rack mounted server) 16GB RAM, 2x 73GB 15K SAS, 4x 300GB 10k SAS Add-on cards - Intel quad-port GigE card (no fibre channel cards) Storage - LSI MegaRAID SAS 9261-8i. onboard SATA is disabled (no SATA drives connected) KVM - Belkin No physical DVD-ROM.. :( I have... Run memtest86+, no RAM faults Disabled/enabled SATA support (BIOS) Attempted install from USB DVD-ROM, no effect Attempted unattended install scripted via Cisco Configuration Manager DVD provided Removed Belkin KVM in case that was causing drama Discovered that the Cisco website is "awesome" for searching for PDFs/Drivers cough, reverted back to Google Downloaded latest LSI drivers from LSI's site and used during Server 2008 install checked Windows ISO against checksum's from MS site checked Windows ISO by using it for an install in a VM Running out of ways to troubleshoot this as I am not sure how to enable any sort of 'verbose' mode during the setup process. Next step I have planned is to remove the Intel NIC and try the installation again.. Edit: Problem was the "Cisco INTEL QUAD PT GBE" (1000/PT) .. will have to see if this card is faulty or if it's just drivers.. thanks for the help.

  Read the article

• Problem using a public key when connecting to a SSH server running on Cygwin

  - by binary255

  We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

  Read the article

• error in auth.log but can login; LDAP/PAM

  - by Peter

  I have a server running OpenLDAP. When I start a ssh-session I can log in without problems, but an error appears in the logs. This only happens when I log in with a LDAP account (so not with a system account such as root). Any help to eliminate these errors would be much appreciated. The relevant piece from /var/log/auth.log sshd[6235]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=example.com user=peter sshd[6235]: Accepted password for peter from 192.168.1.2 port 2441 ssh2 sshd[6235]: pam_unix(sshd:session): session opened for user peter by (uid=0) pam common-session session [default=1] pam_permit.so session required pam_unix.so session optional pam_ldap.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 session required pam_limits.so session required pam_unix.so session optional pam_ldap.so pam common-auth auth [success=1 default=ignore] pam_ldap.so auth required pam_unix.so nullok_secure use_first_pass auth required pam_permit.so session required pam_mkhomedir.so skel=/etc/skel umask=0022 silent auth sufficient pam_unix.so nullok_secure use_first_pass auth requisite pam_succeed_if.so uid >= 1000 quiet auth sufficient pam_ldap.so use_first_pass auth required pam_deny.so pam common-account account [success=2 new_authtok_reqd=done default=ignore] pam_ldap.so account [success=1 default=ignore] pam_unix.so account required pam_unix.so account sufficient pam_succeed_if.so uid < 1000 quiet account [default=bad success=ok user_unknown=ignore] pam_ldap.so account required pam_permit.so account sufficient pam_ldap.so account sufficient pam_unix.so

  Read the article

• Basic multicast network performance problems

  - by davedavedave

  I've been using mpong from 29west's mtools package to get some basic idea of multicast latency across various Cisco switches: 1Gb 2960G, 10Gb 4900M and 10Gb Nexus N5548P. The 1Gb is just for comparison. I have the following results for ~400 runs of mpong on each switch (sending 65536 "ping"-like messages to a receiver which then sends back -- all over multicast). Numbers are latencies measured in microseconds. Switch Average StdDev Min Max 2960 (1Gb) 109.68463 0.092816 109.4328 109.9464 4900M (10Gb) 705.52359 1.607976 703.7693 722.1514 NX 5548(10Gb) 58.563774 0.328242 57.77603 59.32207 The result for 4900M is very surprising. I've tried unicast ping and I see the 4900 has ~10us higher latency than the N5548P (average 73us vs 64us). Iperf (with no attempt to tune it) shows both 10Gb switches give me 9.4Gbps line speed. The two machines are connected to the same switch and we're not doing any multicast routing. OS is RHEL 6. 10Gb NICs are HP 10GbE PCI-E G2 Dual-port NICs (I believe they are rebranded Mellanox cards). The 4900 switch is used in a project with tight access control so I'm waiting for approval before I can access it and check the config. The other two I have full access to configure. I've looked at the Cisco document[2] detailing differences between NX-OS and IOS w.r.t multicast so I've got some ideas to try out but this isn't an area where I have much expertise. Does anyone have any idea what I should be looking at once I get access to the switch? [1] http://docwiki.cisco.com/wiki/Cisco_NX-OS/IOS_Multicast_Comparison

  Read the article

• Linux Sound Drivers - Recompiling kernel with ehcd-hcd module

  - by jhome

  I just installed Linux Mint and I am trying to get my usb soundcard to work. I am completely new to Linux so I have only been learning about all the important parts of the OS this afternoon. No one I know has compiled kernel so I can't ask anyone. I am following instructions on this site: http://wiki.ubuntuusers.de/Benutzer/BigMc#Final-setup-of-US-122L-US-144 "Recompile your Kernel with ehcd-hcd as a module: Instructions for Ubuntu (german) Change "Device Drivers - USB support - EHCI HCD (USB 2.0) support)" to "M" when configuring. Make sure you also install the kernel headers." I know how to do any of these processes. Someone mentioned a package manager. Is recompiling basically in layman's terms reinstallation? Where do I go to the change device drivers? Cheers Edit: I am attempting to be able to use my Tascam US-144 on Linux Mint. Apparently, to use it properly it has to regress to functionality of a former unit (US-122), so according to the instructions a USB port has to be USB 1.0, rather than USB 2.0. I've tried using that ndis** programme for wireless drivers but with no success.

  Read the article

• Connecting to MySQL Server from PHP Command Line (MAMP)

  - by Austin White

  First of all, I'm using Mac OSX 1.6, MAMP 1.9, PHP 5.3.4, and MySQL 5.1.44. I'm in the process of setting up a video encoding service for a site using Chris Boulton's PHP-Resque and Redis. Once the worker process is fired and the videos have been encoded, I need to save their locations to a mysql database. The php script is being run from the shell, so that is where the issue begins. I import the mysql settings and when it attempts to connect, I get the following errors: Warning: mysqli::mysqli(): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): [2002] php_network_getaddresses: getaddrinfo failed: nodename nor servn (trying to connect via tcp://MYSQL_SERVER:3306) in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::mysqli(): (HY000/2002): php_network_getaddresses: getaddrinfo failed: nodename nor servname provided, or not known in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 24 Warning: mysqli::set_charset(): Couldn't fetch MySQLi_Extended in /Users/austingym/Documents/Dropbox/Website/htdocs/homefree/lib/MySQLi_Extended.class.php on line 32 I realize that the error is occurring because it's trying to connect to tcp://MYSQL_SERVER:3306, when MySQL is on port 8889. I've been reading about Mac OSX and MAMP errors regarding the mysql.sock and I've gone through multiple forums and tried various fixes, but none have worked. I've tried PATH=/Applications/MAMP/Library/bin/:/Applications/MAMP/bin/php5.3/bin/:/opt/local/bin:/opt/local/sbin:$PATH and sudo ln -s /Applications/MAMP/tmp/mysql/mysql.sock /tmp/mysql.sock but neither have worked. I even ran a search on my machine for "3306" to find where it's being set, but because that's the normal default, I'm guessing it's not being set explicitly. Any clues on how to fix this rather challenging error?

  Read the article

• Moving MySQL directory on an Amazon EC2 machine

  - by Traveling Tech Guy

  I'm trying to have MySQL point to a directory on an EBS volume I mounted on my EC2 machine. I took th following steps: Stopped MySQL (/etc/init.d/mysqld stop) - successful Created a MySQL directory on my volume, mounted on /vol (mkdir /vol/mysql) Copied the contents of /var/lib/mysql to /vol/mysql (cp -R /var/lib/mysql /vol/mysql) Chanded the owner and group of that directory to match the original (chown -R mysql:mysql /vol/mysql) - after this step, the 2 directories are identical. Edited the /etc/my.cnf file (commented 2 original lines): [mysqld] #datadir=/var/lib/mysql #socket=/var/lib/mysql/mysql.sock datadir=/vol/mysql socket=/vol/mysql/mysql.sock` Started MySQL (/etc/init.d/mysqld start) - FAILED The error file /var/log/mysqld.log contains the following lines: 100205 20:52:54 mysqld started 100205 20:52:54 InnoDB: Started; log sequence number 0 43665 100205 20:52:54 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.0.45' socket: '/vol/mysql/mysql.sock' port: 3306 Source distribution No other errors are available. What am I doing wrong? Where can I find the error/s encountered by MySql? If I restore the original lines, MySQL starts, leading me to believe it may be a permissions issue - but permissions are the same for both directories? Thanks!

  Read the article

• New XPC: No video, no ethernet link, but drive spins

  - by Mike Pennington

  I bought a Shuttle XPC SH67H3 with integrated video. I installed: An Intel i5 2450P 16GB DDR3 RAM A SATA hard drive from my old linux server that still is bootable I have both power connectors plugged into the motherboard. I realize that the Intel i5-2450P doesn't have video capabilities; however, the drive spins like it's doing something useful. It seems like I should get an ethernet link light when I fire this up. I plan to run this headless anyway, so it would be really nice if I could figure out how to run this without a video card at all. I know the IP address and login info for the linux install on the disk. I plugged in speakers, but get no bios beeps when I power it up. Shuttle's bios manual has nothing in there that indicates I should have problems in this configuration. My questions: Is there a reason that the missing video card would block usage of the ethernet port? Are there settings on the motherboard / bios I can change to get this working?

  Read the article

• Unable to connect to FTP server using Filezilla with router in-between

  - by pkswatch

  While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

  Read the article

• Memory upgrade to 8GB on unibody MacBook

  - by dlamblin

  I bought the 13" unibody MacBook one month prior to it's upgrade to become the new improved 13" unibody MacBook Pro (with unopenable battery compartment, extra 3 hours of battery life, more color gammut, SD slot, firewire 800 port, and a new 8Gb memory limit). My MacBook says it is limited to 4GB of DDR3 1066mhz memory, in 2 SO-DIMMs. But that was written back when you couldn't get 2 4GB SO-DIMMs. Now that you can get them, the very similar MacBook Pro is shipping with 4GB standard, and can be upgraded to 8GB. I've asked (Apple reps), and I'm repeatedly told that my model cannot be upgraded to 8. When I ask for the reason they alway say: "Because that's the published limit at the time your mac was built." I find this unconvincing. If they said: "Because the memory controller in the chipset is limited to 4GB, despite being seemingly identical to the memory controller in the same chipset newest MacBook model," then I'd just take their word for it. Has anyone tried it, or found any research as to whether two 4GB DDR3 1066mhz SO-DIMMs can be installed in the unibody MacBook without FireWire?

  Read the article

• IIS FTP error: 426 Connection closed; transfer aborted.

  - by Jiaoziren

  Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

  Read the article

• Need to get SMTP server on MS Server 2003

  - by Matt Dawdy

  Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

  Read the article

• Why is Xampp unable to start Apache?

  - by jribeiro

  I formatted my computer a week ago. Installed wampp on Windows XP, git and everything I needed. When I run git for the first time it told me it had a problem with my user folder (because of the accents) so I created a new user and migrated everything to the new one. After this, wampp wouldn't start anymore. I uninstalled it and installed xampp which is what I'm using now. My problem is that even though I requesed xampp to install Apache as a service it isn't installed. It doesn't show in Windows' services screen. Xampp control panel shows mysql service running OK. When I click to install Apache as a service it returns no error. When I click Start Apache no error is outputed. No file and no errors under c:/xampp/apache/log/ If I restart my computer it says that Apache service is not installed. I tried to reinstall wampp and the same problem occurs. If I run netstat -a -no nothing is running on port 80! What can I do?

  Read the article

• Install mod_perl2 on Apache 2.2.14 (Ubuntu10.04)

  - by MICADO

  I have installed via synaptic package ibapache2-mod-perl2. I tried this line in httpd.conf: "LoadModule perl_module modules/mod_perl.so" Apache tells me when I reload the server : "[warn] module perl_module is already loaded, skipping". Well ok, but when i try to look in the browser to a repertory i don't have access .Apache send me the error : Forbidden You don't have permission to access /cgi-bin/ on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.0.10 Port 90 But this should show modperl is installed and that's not the case... I would like my virtual host that follows run with mod_perl2 <VirtualHost v1:80> ServerAdmin webmaster@localhost ServerName v1 DocumentRoot /var/www/v1 <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/v1/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www/v1/cgi-bin/ <Directory "/var/www/v1/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> I'd like to know how to configure mod_perl2. Do i have to change something in the apache configuration file to make my cgi repertory works with mod_perl2? Thanks to any help!

  Read the article

• Backup data rate on Raspberry Pi maxing out at 5 Mb/s. Why?

  - by bastibe

  I set up my Raspberry Pi as a Time Machine, as documented here. At the moment, the Raspberry Pi is connected to my MacBook Pro using a direct Ethernet cable. Also, an external hard drive (laptop drive) is connected to the Raspberry Pi using the USB port. However, backups are pretty slow. Activity Monitor claims that the Network is transferring a very steady 5 Mb/s, where my Time Capsule is transferring up to 8 Mb/s with a lot of fluctuation. The Raspberry Pi self-reports (top) that its CPU is only half-used, with about equal parts afpd, usb-storage and jbd2/sda1-8. Thus, I think that the processing power of the Raspberry Pi does not seem to be the problem here. To me, this looks like there is some kind of bottleneck that maxes out at 5 Mb/s thus potentially having my backups run at less than their potential speed. To the best of my knowledge, this might be the afp-daemon, the usb-bus or the external hard drive. So, my question is, how could I identify the true culprit and what can I do about it?

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by Develop7

  Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

  - by develop7

  Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

  Read the article

• OS X Keeps prompting me for SSH private key passphrase (OS X 10.6.8)

  - by Danny Englander

  I have a private key to ssh into my server and the connection works. In my hosts file I have: Host myhost HostName xxx.xxx.xxx.xx GlobalKnownHostsFile ~/.ssh/known_hosts port 22 User myuser IdentityFile ~/.ssh/mykey_dsa IdentitiesOnly yes .. and then I type ssh myhost Every time I connect, I get the Mac OS X keychain prompt and I tell OS X to remember the passphrase but then when I disconnect from ssh and re-connect, I am prompted to add the passphrase to the keychain again. This is only a recent problem so I suspect and issue with Keychain? To be clear, I can 're-add' to keychain every time and connect but this defats the purpose. The permissions on my dsa key are set at 600 or -rw-------@ I tried repairing disk permissions but that did no good. My Google-foo is also failing me, nothing of use came up. So I am not sure if this an OS X / keychain issue or an SSH issue. update: When I try ssh -vvv myhost, I think it reveals the issue: debug1: Trying private key: /Users/danny/.ssh/mykey_dsa debug1: PEM_read_PrivateKey failed debug1: read PEM private key done: type <unknown> debug3: Not a RSA1 key file /Users/danny/.ssh/mykey_dsa. debug1: read PEM private key done: type DSA Identity added: /Users/danny/.ssh/mykey_dsa (/Users/danny/.ssh/mykey_dsa) debug1: read PEM private key done: type DSA debug3: sign_and_send_pubkey debug2: we sent a publickey packet, wait for reply debug1: Authentication succeeded (publickey). ... and after that I get connected. I think this crux of the matter is: PEM_read_PrivateKey failed

  Read the article

• Exchange 2003 IMAP not working for some users

  - by John Gardeniers

  We normally don't have a need for IMAP connections from outside the company network but in order to allow a one user to use IMAP on a portable device I've turned it on and opened port 993 on the firewall. When the user in question was unable to get connected I tested this using Outlook remotely. Start by creating a new IMAP account in Outlook using a test account. No problems, it worked perfectly. Now try the same thing using the account of the user who actually needs to connect and it's a no-go. Outlook simply keeps prompting for logon credentials. Next I tried using my own account and that too failed. Testing with a couple of other accounts worked perfectly. Interestingly enough, with my own account I've used IMAP on a MAC before (internally) without a problem and I'm not aware of anything that has changed which could affect IMAP on my account. Checking the user settings in ADUC showed that all accounts have the same Exchange protocol settings. Specifically, IMAP is enabled. A check of the event logs on the server reveals no entries for the connection attempts, making this kind of difficult to debug. Has anyone here encountered such a situation and, even more importantly, what caused it?

  Read the article

• Why can't I unblock postgres with shorewall?

  - by ryeguy

  I can't seem to unblock the port needed for postgres using Shorewall. I am developing a PHP app on my windows machine here, and then I upload it on my linux box to actually use it. The linux box runs the php files as well as hosts the db server. Since I need it working from both machines, in my PHP code I am referring to the database as the full IP instead of localhost. I can easily connect to postgres from my windows machine, but ironically, my PHP app can't connect to postgres even though it's on the same box. Here's what I have in /etc/shorewall/rules: #macro/action src dest PostgreSQL/ACCEPT net $FW PostgreSQL/ACCEPT loc $FW PostgreSQL/ACCEPT loc dmz PostgreSQL/ACCEPT net dmz PostgreSQL/ACCEPT loc net PostgreSQL/ACCEPT dmz $FW PostgreSQL/ACCEPT dmz loc PostgreSQL/ACCEPT dmz net PostgreSQL/ACCEPT dmz dmz Clearly I have a ton of crap there. The first line is all I needed to make it allow a connection from my windows machine. All the lines after it are me just trying everything to get it to work. What am I missing?

  Read the article

• Mac OSX and root login enabled

  - by reza

  All I am running OSX 10.6.8 I have enabled root login through Directory Utility. I have assigned a password. I get an error when I try to ssh root@localhost. ssh -v root@localhost OpenSSH_5.2p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /Users/rrazavipour-lp/.ssh/config debug1: Reading configuration data /etc/ssh_config debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /Users/rrazavipour-lp/.ssh/identity type -1 debug1: identity file /Users/rrazavipour-lp/.ssh/id_rsa type 1 debug1: identity file /Users/rrazavipour-lp/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.2 debug1: match: OpenSSH_5.2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /Users/rrazavipour-lp/.ssh/known_hosts:47 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /Users/rrazavipour-lp/.ssh/id_dsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Trying private key: /Users/rrazavipour-lp/.ssh/identity debug1: Offering public key: /Users/rrazavipour-lp/.ssh/id_rsa debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Next authentication method: keyboard-interactive Password: debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Authentications that can continue: publickey,keyboard-interactive debug1: Authentications that can continue: publickey,keyboard-interactive debug1: No more authentication methods to try. Permission denied (publickey,keyboard-interactive). What I am doing wrong? I know I have the password correct.

  Read the article

• Can access SSH but can't access cPanel web server

  - by Tom

  I've built a Cent OS 6.0 vps and then i've installed the latest cPanel/WHM. This isn't my first installation but i've noticed something weird especially that i've never used the 6.0 version.. when i tried to install cPanel, it didn't recognize wget so installed it, then cPanel said that Perl isn't installed, i've installed that and the installation went well since then. Now, when i've tried to access the server via the browser with the IP Adress as i've used to, it didn't work, it was just loading forever, i tried the 2087 port, still the same. but SSH works. I've also tried the commands to start the server manually but none of them worked. How to fix that? Edit: iptables -nL Result root@server [~]# iptables -nL Chain INPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination acctboth all -- 0.0.0.0/0 0.0.0.0/0 Chain acctboth (2 references) target prot opt source destination tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:80 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:80 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:25 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:25 tcp -- 216.119.149.168 0.0.0.0/0 tcp dpt:110 tcp -- 0.0.0.0/0 216.119.149.168 tcp spt:110 icmp -- 216.119.149.168 0.0.0.0/0 icmp -- 0.0.0.0/0 216.119.149.168 tcp -- 216.119.149.168 0.0.0.0/0 tcp -- 0.0.0.0/0 216.119.149.168 udp -- 216.119.149.168 0.0.0.0/0 udp -- 0.0.0.0/0 216.119.149.168 all -- 216.119.149.168 0.0.0.0/0 all -- 0.0.0.0/0 216.119.149.168 all -- 0.0.0.0/0 0.0.0.0/0

  Read the article

• Bugzilla email issue

  - by xian

  My bugzilla system keep hit the following error: There was an error sending mail from '[email protected]' to '[email protected]':Can't send data I think that is some problem with my setting and configuration. First is the urlbase I have tried setting it to bugzilla.example.com, and http://127.0.0.1:81/, and http://10.0.0.236/ (My laptop IP address, I use this laptop to set up bugzilla) but the error still persists. Actually what should I put in the urlbase field? Parameter = Email Under mail_delivery_method, i choose SMTP. Under mailfrom, I put bugzilla-daemon. smtpserver, I tried leaving it blank, or setting it to 220.181.12.12 before, but could not solve my problem For my sql, the following is the data and command I used: C:\mysql\bin>mysql --user=root -p mysql Enter password: 1234 (When I install mysql into my laptop, it ask me to key an username and password, i have key in username as 'cvuser' and password as '1234', but here never ask me to key in any username) Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.5.15 MySQL Community Server (GPL) mysql> GRANT ALL PRIVILEGES ON bugs.* TO 'bugs'@'localhost' IDENTIFIED BY '123456'; Query OK, 0 rows affected (0.03 sec) In C:\Bugzilla\localconfig, I put the following info: # # How to access the SQL database: # $db_host = "localhost"; # where is the database? $db_port = 3306; # which port to use $db_name = "bugs"; # name of the MySQL database $db_user = "bugs"; # user to attach to the MySQL database # # Enter your database password here. It's normally advisable to specify # a password for your bugzilla database user. # If you use apostrophe (') or a backslash (\) in your password, you'll # need to escape it by preceding it with a \ character. (\') or (\\) # $db_pass = '123456'; Can someone tell me where my mistake is? I have googled for this issue for few days but still cannot find the solution.

  Read the article

• Flushing iptables broke my pipe, how can I save my instance?

  - by Niels

  I was setting up my iptables when I performed a iptables -F and my ssh pipe broke. This is the last output of my session: root@alfapaints:~# iptables -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW,ESTABLISHED tcp dpt:2222 ACCEPT tcp -- li465-68.members.linode.com anywhere state NEW,ESTABLISHED tcp dpt:nrpe ACCEPT tcp -- anywhere anywhere tcp dpt:9200 state NEW,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:http state NEW,ESTABLISHED ACCEPT udp -- anywhere anywhere udp spt:domain Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:2222 ACCEPT tcp -- anywhere anywhere state ESTABLISHED tcp spt:nrpe ACCEPT tcp -- anywhere anywhere tcp spt:9200 state ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp spt:http state ESTABLISHED ACCEPT udp -- anywhere anywhere udp dpt:domain root@alfapaints:~# iptables -F Write failed: Broken pipe I tested my connection just before and I was able to connect with ssh. Now I did a nmap scan and not a single port is open anymore. I know my VPS is running on VMWare ESXi, could a reboot help? Or if not could I attach and mount the disk to another vm to save the data? Does anybody have some advise? And maybe an explanation what happend or what could have cause my pipe to break? ps: I didn't save my rules on the config directories of iptables. But used a file I stored in ~/rules.config to apply my rules like this: iptables-restore < rules.config So probably a reboot would help? Thanks a lot in advance.

  Read the article

• How to restore broken Ethernet functionality on Mac G5 running Mac OS 10.4.11 (Tiger)

  - by willc2

  I had a disk error that rendered my Mac unbootable. I repaired it with Tech Tool 4, but now networking does not work. Network Preferences reports that my Ethernet cable is unplugged. I know this is bogus because when I boot from an emergency partition, networking works correctly. Furthermore, wireless networking is also broken, which I tested with a known-good Wi-Fi dongle. Whenever I try to change Network Port Configurations by creating a New or Renaming an existing one, example: I get this message in the console: Error - PortScanner - setDevice, device == nil! Error - PortScanner - setDevice, device == nil! In sets of two as shown. When I try to invoke the Network Diagnostics app, it immediately crashes. My first thought is to reinstall Tiger with the Archive and Install method so I don't have to reinstall all my applications but I have lost my Tiger installer disk. My next thought is to buy Leopard for $107 on Amazon. If there is any way I can just repair my Tiger install I would be happy to save that money, though. This is not my main machine and I am loathe to put more money into it. How can I recover my network functionality? UPDATE: I found my Tiger install disk and tried an Archive and Install. It failed with an unhelpful error message along the lines of "Can't install, try again". I tried again but had the same error. My guess is, some corrupt or missing file in my User folder is preventing migration. I have a backup created with Super Duper that is a bit out of date but will startup the machine (with functional networking). I would love to just copy over the file(s) that got messed up but I don't even know where to look. What is the likely location of the System files that would cause the aforementioned symptoms?

  Read the article

< Previous Page | 829 830 831 832 833 834 835 836 837 838 839 840  | Next Page >