Search Results

Search found 98288 results on 3932 pages for 'user interface'.

Page 836/3932 | < Previous Page | 832 833 834 835 836 837 838 839 840 841 842 843  | Next Page >

  • Network - Routers conflicting in my subnet

    - by Richard
    I have a router whose IP is 192.168.1.1 and I be experiencing conflict with another router on my subnet (which probably has 192.168.1.1 as IP too). I think when it tries to connect to the network, eventually taking the place of my router because when I try to access the config page of my router, which appears to me is a config page from another router that is not mine. Do you have any solution except to change the IP of my router to an IP not common? As I have set up the exclusivity that only my IP router? I work with dynamic IPs (wireless networking) and static (for wired). How do I? I just wanna to do some setting in my router that affects all other, so that doesn't conflicts anymore.

    Read the article

  • Search all files containing text

    - by enthdegree
    With Busybox, how do you search for an expression within a bunch of files recursively through a bunch of directories, but only look through text files? We don't know what the file's suffix is going to be; it could be .sh, it could be nothing, it could be something else. I was considering somehow basing the search on encoding although I am not quite sure what the encoding would be either. I've tried busybox grep -r but it searches through binary files too, which wastes a lot of time.

    Read the article

  • HDD cannot be booted from

    - by K.Wong
    I have an ASUS A52F, no mods, with Win7 preinstalled. There is one hard drive, two partitions, one for the OS (C:) and one for data (D:) After laptop trauma, i.e. I dropped it, it still worked fine. However, when chkdisk was run on the C: drive chkdisk crashed, and Windows is unbootable. Windows Startup Manager utility was run, but error code 0xc00000e9 was given. Windows help db shows that this is a BIOS problem, however in BIOS setup the drive can be accessed, and folders can be shown. I also burned a Ubuntu 12.04 distro, and booted off it, but my internal HDD is missing and cannot be accessed. When installation program is run the HDD shows up as a location to install to yet the drive is shown as blank. tl;dr: HDD damaged, chkdisk crashed. Windows 7 is unbootable. Given error code, according to Microsoft db, is a BIOS problem, yet in BIOS the drive is accessible. different OS (Ubuntu 12.04), booted off a distro, yet HDD is inaccessible. Quick help appreciated.

    Read the article

  • Ubuntu 10.10 strange USB file Permissions

    - by Christian Hubinger
    Hi, I'm developing a cross-plattform application that is delivered an run dirctly form an USB stick. As FAT32 ist the only FS working well for this (rw on windos/linux/mac) we use it as the FS for the stick. My Problem is that from Ubuntu 10.4 - 10.10 something changed at mounting the stick is mounted with files: rw-rw-r directories: rwxrwxr-x and (that is really strange) the Win32 Version of the application app.exe: rwxrwxr-x I tried for quit a while to find out where this is configured but could not find it - simple udev rule with MODE="0777" simpyl gets ignored. Any kind of idea help is very, very welcome, as not being able to find a solution for this is a real show stopper. thanks in advance and kind regards, Chris

    Read the article

  • How to import UTM coordinates into Google Earth?

    - by Florian Jenn
    I have some points in UTM coordinates that I'd like to import into Google Earth. Google Earth is able to show UTM coordinates, but I have not found a way to import points or enter coordinates in a placemark's properties with UTM coordinates. Is there any possibility to do this with just Google Earth or do I need to convert my data set externally? I do have separate tools for coordinate conversion, but I'd like to spare the extra step.

    Read the article

  • Data in custom attribute not returned in UserProfile object in MOSS

    - by Jason Hocker
    I've created two new custom attributes in the UserProfile. When the service we wrote returns data about a specific user by using the UserProfile object, sometimes the data isn't returned, even though if we look at the user in SSP it look populated. Some users work; this is the first user we set up with data. I'm not sure if sometime in the meantime after setting up the first user and testing, if there's something we ran and need to run again. How can I get all the users to get their data returned in a call to their UserProfile?

    Read the article

  • Copy .exe to Explorer.exe!

    - by Phillip
    What would happen if an ordinary .exe file is copied to explorer.exe? Will it be automatically running as long as explorer.exe is running? This seems like a major security whole...is it even possible? Does anti-virus protect against that sort of thing?

    Read the article

  • Using rsync when files on one end are all lowercase

    - by DormoTheNord
    I want to rsync a lot of files from a Windows box to a Linux server. The problem is, the files on Windows are all mixed case, and the files on the linux server need to be all lowercase. One solution is to have a script that rsyncs to a different directory on the server, copy the files into the main directory, and then convert them all to lowercase. I'd rather find a more elegant solution, though. I'd prefer a command line application, but I'd be willing to go with a GUI application if that's the best option.

    Read the article

  • How can I tell if a KB or newer has been installed for Windows?

    - by IguyKing
    I have a Windows system that I need to audit. The requirements is that (for example) KB2160329 has been installed onto the system. I know from lots of digging that KB2731847 that we have installed in the environment superseded the earlier KB. MSkbfiles.com works if you know the file name such as TCPIP.SYS. Doesn't do anything if you are just looking for KB Hotfixes. How can I say feed in a script that I'm looking for KB2160329 and it can check for superseded patches? Or is there a website somewhere that I'm missing? [Edited 7 May 2014 8:54am CST] I'm looking for a way to say that KB2731847 which is on the system does fix the same issue (plus more fixes) as KB2160329 which is not in the list as being installed on the system.

    Read the article

  • Why have my Aperture referenced files disappeared without trace?

    - by Andy Harvey
    I have an Aperture library that I've been using for several years. In the past week a number of recent photos and movies have mysteriously disappeared. The missing files were all safely imported within the last week (I had reviewed some of the movies within Aperture, so know this to be true). The files were all referenced on an external drive. Within Aperture the files now have a "referenced file can't be found" icon. I've tried searching for the missing files manually, including within the Aperture library package, but they cannot be found anywhere. How can I (a) work out where the missing files have gone, and (b) identify the cause and ensure it doesn't happen again? I'm using Aperture 3.3.2.

    Read the article

  • Rubik's cube solver

    - by becomingGuru
    I can't seem to locate my physical rubik's cube. What desktop/web/iphone software should I use to solve a cube. +1 if the software also teaches to me new methods. +1 if it has built in multiple algorithms, it can work from. If you like some particular feature of the software like undo, or bookmark a stage, elaborate.

    Read the article

  • Windows 7 installation: drive selection doesn't show drive letter

    - by FrozenKing
    I am eager to get this answer i.e. in Windows 7 when we format the computer there is a problem that when we have to select drive for formatting, it doesn't show drive letter. *I need a solution wherein when I format I want to know its drive letter so that I may not be confused while formatting. *See the difference between windows xp and windows 7. I want windows 7 to show drive letters like windows xp. Does any one know why windows 7 doesn't show drive letters.

    Read the article

  • help with xorg.conf: xrandr on one of two widescreen monitors; rhel5, kde, ATI Radeon X1300

    - by user35997
    Can anyone help with me configure my dual-screen monitors for rotation? I have xrandr 1.1. Have tried various approaches, nothing takes. I can't even get the xrandr options to show up in KDE's Display control panel. Thanks1 My lspci output: 03:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] My current xorg.conf (works, minus screen rotation): # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "Multihead layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "off" Option "Clone" "on" EndSection Section "Files" EndSection Section "Module" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "Monitor" ### Comment all HorizSync and VertSync values to use DDC: Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Dell 2407WFP (Digital)" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "dpms" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Videocard0" Driver "vesa" EndSection Section "Device" Identifier "Videocard1" Driver "vesa" VendorName "Videocard Vendor" BoardName "ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "DesktopSetup" "horizontal" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 16 SubSection "Display" Viewport 0 0 Depth 16 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" "1280x1024" "800x600" EndSubSection EndSection

    Read the article

  • nameserver spoiling avahi multicast name resolution of .local domain

    - by Doug Coburn
    After trying to ping a machine on my local network, I noticed that I was trying hit address 66.152.109.24. This is an external public address. Resolution should have occurred via avahi mDNS. I ran dig to see how the name resolution worked and my quest/centurylink name server was retuning results for my .local domain queries! I tried a random name and got the same ip address result. $ dig jakdafj.local ; <<>> DiG 9.8.1-P1-RedHat-9.8.1-3.P1.fc15 <<>> jakdafj.local ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 58410 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;jakdafj.local. IN A ;; ANSWER SECTION: jakdafj.local. 10 IN A 66.152.109.24 jakdafj.local. 10 IN A 204.232.231.46 ;; Query time: 104 msec ;; SERVER: 205.171.3.25#53(205.171.3.25) ;; WHEN: Sat Mar 24 20:40:17 2012 ;; MSG SIZE rcvd: 63 Am I missing something or is my DNS name server at 205.171.3.25 corrupted?

    Read the article

  • Setting up a laptop hard drive as a secondary on a tower?

    - by vermiculus
    I'm trying to install Windows 8 for a friend who has recently bricked a laptop hard drive. The new one is OEM so there is no OS - I need to be able to stick it in to my tower and load the new OS on it. Both bricked and replacement laptop hard drives are SATA and connect to my mobo just like any other. After I post this I'm going to check the BIOS and see if it shows up, but so far I don't have it showing up in Disk Management. Any ideas would be greatly appreciated.

    Read the article

  • How to chmod in Nautilus via keyboard?

    - by Joe Casadonte
    I like to use the mouse as little as possible, but I find Nautilus useful enough to use it when browsing for files. If I want to rename a file while in Nautilus I can hit the F2 key; is there a way I can chmod, too? I really hate going to properties and then permissions and then hitting the combo boxes one by one.... Thanks!

    Read the article

  • windows 7 crash during hibernation

    - by Andrew Fforts
    At times, when I hibernate my Dell Latitude e6400 with Windows 7 (64 bit), the laptop screen goes black as it should, but then it takes several minutes before it powers down. Then, when I attempt to "resume," Windows boots up from a fresh startup, with all my work lost, and tells me that it's recovered from a serious error. What can I do to resolve this problem? Other background info: -I got a new hard drive with plenty of space about a year ago; I only use a small fraction of that space. This sometimes happens when I don't have any programs running at all. If it's relevant, I do have Dropbox and OneDrive running in the background, though. -The problem usually occurs when I hibernate just after I unplug from an external monitor to bring my laptop home, but I believe it happens at other times, too. Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.4 Locale ID: 1033 Additional information about the problem: BCCode: 1000009f BCP1: 0000000000000004 BCP2: 0000000000000258 BCP3: FFFFFA80036DEB50 BCP4: FFFFF80000B9C510 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1

    Read the article

  • How can I determine a cmd.exe's parent process.

    - by René Nyffenegger
    Sometimes I find myself in a cmd.exe environment that itself was started by another cmd.exe or by another console-based application. Now, working in such an environment, I'd like to know what happens if I type exit, that is, if the cmd.exe window will disappear, or if it goes back to the creating cmd.exe or application. This, of course, because sometimes as I work in cmd.exe I am forgetful about how I called it. So, is there a way to find out the parent process (if this is the correct terminus for what I mean) of a cmd.exe within cmd.exe?

    Read the article

  • "Error loading operating system": Win7/Vista

    - by LookitsPuck
    Have this computer for about 2 years now. Originally had Vista installed, now have Windows 7 installed. Both on separate hard drives. Also have another drive used strictly for media. About a week ago, the Vista hard drive started going on its way out. Was getting problems on startup. After a few BIOS settings, I was able to get into Windows 7 and everything was fine. However, I started remembering the startup issues, so I deleted the bootup for Vista under msconfig. Didn't restart the computer at that time, though. For a few days, everything was ok. Last night I play a little poker, then hit the hay. I wake up to a good ole "Error loading operating system" on the screen. Just wonderful. Looks like the computer restarted overnight (auto updates, anyone?). So, after a big of finagling and half hearted tries, I can't get past the "Error loading operating system" screen. FWIW, in the BIOS it can see my hard drives fine. So I move on. I get my Windows 7 installation disk to try and do a repair. Go in the BIOS, change boot priority to DVD drive, and we're on our merry way. After loading from the disc, I first try jumping into the "Repair your computer" section. That opens up the System Recovery Options. However, this is where the problem comes into play. I don't see any operating systems here. Nada. What's odd though is if I click on the Load Drivers button, I can see my Windows 7 partition (C:), and can go through the files and folders without issue. What do I do at this point? I can't repair it. It seems like I can traverse the hard drive without issue when in an open dialog in the System Recovery Options, but I'm getting the good ole "Error loading computer" on bootup. Suggestions? Thanks all!!

    Read the article

  • excel chart dynamic range based on values

    - by andrewk
    I'm trying to create a chart that auto updates itself from a data provided. The range of the chart is always fixed/locked. The issue I'm facing is that when a value for a certain month is 0, I want it to skip to the last non-zero month . Meaning the ranges selected forming the chart should exclude the month with the value zero. Which in most cases is the top month. The image below should clear it up. Is there a way to have the chart range be dynamic based on certain values?

    Read the article

  • Intel i7 vs Xeon quad core processor?

    - by jasondavis
    I know the Xeon processors have been around for a long time and are mostly used in servers but I am curious, why do people not use the xeon's in a high performance desktop? As far as I know about the best desktop processor out there now is the i7 line. The i7's and xeons are both quad-core processors, what is the main difference in these? I just saw that the mac pro's are using the quad core xeons instead of the i7's

    Read the article

  • Make IE stop asking me to install adobe flash player

    - by Sam
    I don't have adobe flash player installed, and don't miss the flashing ads a bit. The only thing that annoys me: IE8 keeps asking me "this web site wants to install Adobe Flash Player", and I want to get rid of this question. I don't want to install it, not now, not ever. So how do I make IE stop asking me about it?

    Read the article

  • Unix style command line history in windows

    - by dean20007
    This may be a duplicate so feel free to close and point me in the right direction but is there a way of getting Unix style command line recall in windows. E.g. Opening a new command window and using the up arrow key will recall the last x number of statements. I know this works in the command window per command window session but is there a way to persist across sessions?

    Read the article

< Previous Page | 832 833 834 835 836 837 838 839 840 841 842 843  | Next Page >