Search Results

Search found 26454 results on 1059 pages for 'post parameter'.

Page 838/1059 | < Previous Page | 834 835 836 837 838 839 840 841 842 843 844 845  | Next Page >

• How to redirect or rewrite IIS site with port in URL to URL without port?

  - by user2573690

  I'm not 100% sure if this is the right part of StackOverflow to post this but to me it made the most sense. Sorry if its not! Currently I have a site in IIS configured on HTTPS with port 7500. I can access this site by using the URL: https://portal.company.com:7500. What I would like to do is remove the port number at the end of the URL so users can access this site using https://portal.company.com... I am a complete beginner with IIS, but what I have tried is the HTTP Redirect, which if I used on this IIS site, would redirect a user that hits portal.company.com:7500 to some other site, which is not what I need. Another thing I have though about is creating another IIS site which serves the purpose of being at the URL portal.company.com and when its hit, it redirects to my portal.company.com:7500, but I don't know if this is the best approach. So my question is, what are my options for achieving the behavior mentioned above and what is the best/recommended approach? I haven't played with URL Rewriting before but I will look into that now while I wait for a reply. Thanks!! Using IIS Manager on a Windows Server 2008 machine.

  Read the article

• SharePoint blog site won't search local site... you can only search for Mysites and users

  - by Don

  I have a Howto company Blog site that i post to for my clients to access for help. For some reason it has stopped letting anyone search on it. I can search for Mysites or users. But when you drop down the tab to search: This Site: "blog site name" you get the following reply: No results matching your search were found. Check your spelling. Are the words in your query spelled correctly? Try using synonyms. Maybe what you're looking for uses slightly different words. Make your search more general. Try more general terms in place of specific ones. Try your search in a different scope. Different scopes can have different results. I have tried the following command: from the Index server 1-net stop osearch 2-net start osearch 3-iisreset /noforce But still not able to search a local blog site I can only search for users and Sites. please help Don

  Read the article

• How do I view source in Outlook 2010?

  - by Martin Duys

  This question has already been asked here; but the answer only gives advice on how to view the email header not the actual html source of the email. There is another question here, which I think may be caused by the same issue as mine, but does not have a satisfactory answer (the answer does not work for the person who posted the question) If I right click on the bottom of an email I can see the option to 'view source' but when I select it nothing happens. I have done a bit of research and came across a post for a much earlier version of Outlook that suggested adding something into the registry. I applied this advice, but it made no difference; but I'm pretty sure that applying this solution correctly for my circumstances will do the trick. When I first received this machine it had a demo version of UltraEdit installed. I uninstalled UltraEdit and installed Notepad++ instead. I am convinced that there is a registry entry that is pointing to UltraEdit as the default view for 'view source' in my email and I need to replace this entry with a reference to Notepad or Notepad++, but I don't know how to do this. Any suggestions?

  Read the article

• Linux: 3 Monitor PCI-e Graphics card (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. I'll post the exact error message here soon, but it's very useless. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment. Thanks, Nick

  Read the article

• Finding bluetooth link key in Win7, to double pair a device on dualboot computer

  - by Ilari Kajaste

  How can I dig up the bluetooth link key for a paired device in Win7? Is this something that is dependent on the bluetooth stack I'm using (Toshiba), or is there a generic place to store these in Win7? Note: I'm not talking about the six-digit code usually typed by the user during pairing - that is worthless since it's discarded after pairing process. What I mean is the 128-bit link key that the devices exchange during pairing, and use thereafter to encrypt all their bluetooth traffic. Background: I dualboot Win7 / Ubuntu on my laptop, and I would like to have my phone paired to both OS's. Since the dualbooting computer has only one bluetooth adapter and thus only one bluetooth address, I cannot do two pairings to the phone, since on the second pairing (windows) the phone just replaces the previous pairing (linux) to the same bluetooth address. A thread on Ubuntu forums pointed me to what I have to do - pair first on linux, then on windows, and then replace the link key on linux side with the one windows negotiated. I can find the linux side pairing key from /var/lib/bluetooth/[BD_ADDR]/linkkeys - no problems there. However, on windows side I can't find the key. According to the forum post, on windows side the key should be in SYSTEM\ControlSet002\services\BTHPORT\Parameters\Keys\[BD_ADDR] but while that registry key does exist, it has no subkeys. (And a similar registry path in ControlSet001 didn't have any subkeys either.) One thing I've been instructed to do is to capture all events during pairing with Sysinternals Process Monitor. I did this, but I haven't been able to find any useful information from the captured events, not even by exporting the data to a huge XML and grepping that with the BD_ADDRs (with or without colons). So how could I find the link key for a paired device in Win7? Some reference information: Wikipedia: Bluetooth, Security Now: Bluetooth security

  Read the article

• Why is Linux choosing the wrong source ip address

  - by Scheintod

  and what to do to let it choose the right one? This all happens inside an OpenVZ container: The Host is Debian/Wheezy with Redhat/OpenVZ Kernel: root@mycl2:~# uname -a Linux mycl2 2.6.32-openvz-042stab081.5-amd64 #1 SMP Mon Sep 30 16:40:27 MSK 2013 x86_64 GNU/Linux The container has two (virtual) network interfaces. One in public and one in private address-space: root@mycl2:~# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.2 P-t-P:127.0.0.2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:475 errors:0 dropped:0 overruns:0 frame:0 TX packets:775 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:32059 (31.3 KiB) TX bytes:56309 (54.9 KiB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:80.123.123.29 P-t-P:80.123.123.29 Bcast:80.123.123.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.0.1.29 P-t-P:10.0.1.29 Bcast:10.0.1.29 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 The route to the private network is set manually: root@mycl2:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 venet0 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 venet0 Tring to ping others on the private network leads to the wrong source address been choosen: root@mycl2:~# ip route get 10.0.1.26 10.0.1.26 dev venet0 src 80.123.123.29 cache mtu 1500 advmss 1460 hoplimit 64 Why is this and what can I do about it? EDIT: If I create the route with (thanks to Joshua) ip route add 10.0.0.0/8 dev venet0 src 10.0.1.29 it is working. But according to man ip-route the src parameter should only set the source-ip if this route is chosen. But if this route is chosen then the source-ip would be that anyway.

  Read the article

• Robocopy (without /l flag) running for hours making log file huge, but not actually copying anything

  - by Mickster

  Here's my command: Robocopy C: C:\C_root /FP /BYTES /TEE /S /E /COPYALL /DCOPY:T /MOVE /Z /ETA /XJ /R:2 /W:30 /XF pagefile.sys /XD /LOG:C:\robocopy.log. BTW, notice the /XD option above. After that I had a few directories that I want to omit. I showed these between angle brackets like this: (left angle bracket) a few dirs I wanted to exclude (right angle bracket). Amongst these dirs was the C_root dir itself, so that it did not get into an "infinite" recursion. (This part was stripped from the post because angle brackets apparently have a meta-meaning to superuser.com about hyperlinks.) The command window this was running in listed a few "EXTRA" files then "hung". By this, I mean no more output, no cmnd prompt, and if I tried to scroll it up, it would immediately scroll right back to the bottom. After about six hours, it finally finished, although I never got a cmnd prompt back in the window I started it in. DIR shows the log file at more than 1.3GB, but when I try to do a MORE on it, I get "Cannot access file". C:\C_root never grew larger. Does anyone have an idea what is going on here?

  Read the article

• Why is my new PC so slow at startup?

  - by rumtscho

  Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

  Read the article

• Laptop CPU fan not working properly

  - by Smith

  My laptop's CPU fan is suddenly acting very bizarre, and I am at a loss for what to do so I am asking for some help. Specifically, the fan is not even starting to spin until the CPU reaches 60 degrees Celsius (checked through HWmonitor). Once it is on, however, it properly stays on even when the CPU gets back to idle temps around 38 Celsius. Before, the fan was simply starting with the computer and staying on like normal. I've checked this for consistency both by allowing cold boots to ramp up temperature to 60 Celsius (the slow climb also causing the laptop to become unreasonably warm near the heatsink), and also running Prime95 immediately to kickstart the fan (this works every time). The fan seems to be stationary when turning the computer on from either sleep or shutdown. The fan will start at POST very briefly, and then stop completely. I've checked the BIOS for a SmartFan setting but haven't found any. I've opened the case to check for dust or debris and have not found anything (I applied some canned air to the area just in case). The laptop is a Lenovo ThinkPad Edge E430 and the CPU is an Intel Core i5 3210m @ 2.5 GHz. Any advice would really be appreciated.

  Read the article

• Same script, different behavior [migrated]

  - by Antoine_935

  I just stumbled upon an interesting bug... Still trying to figure out what is exactly happening. Maybe you can help. First, the context. I'm currently building yet another man to html converter (for some reasons I won't motivate here, but I need it). So, have a look at the screenshot below (see the link), more precisely at the outlined spots. See? On the upper shell, I have &lt ; and &gt ;, that is, escaped html. While on the shell below I have < and directly. But as you can see (or do I seriously need looking glass ?), the command man 2 semget | webmanneris the same on both sides, as is the which webmanner. The two are executed roughly at the same moment, with no modification made to the script between. [Oops, cannot post pictures just yet... Here comes the link] http://aspyct.org/media/webmanner-bug.png But the shell below is older (open about 1 hour ago). Newer shells all print out &lt ;. So my first guess was that it somehow had a cached reference to the old inode of the file, or old blocks or whatever. So I modified parts of the script, at the start and then at the end, to print different messages. And, surprise, the message shown up on both terminals. But still, same difference between &lt ; and <. I'm confused... How to explain that behavior? I'm working on a OSX 10.8 (Mountain Lion) EDIT: OK, there is one big difference: the shell below uses ruby 1.9.3, while above is 1.8.7. Is there any known difference in string handling between the two versions ?

  Read the article

• package manager cannot create users? installation script fails?

  - by RapidWebs

  It seems that when trying to install any package which requires the creation of a system User and Group, the installer fails with the error: install: invalid user 'username' When it happened the first time, I assumed it was related to the package, or it's installation script. But now I am attempting a different package, and alas, the same issue arises! note: /etc/passwd and /etc/group is not chattr -i Here is the example output from an attempted installation (of varnish): Selecting previously unselected package varnish. Unpacking varnish (from .../varnish_3.0.2-1ubuntu0.1_amd64.deb) ... Processing triggers for man-db ... Setting up libvarnishapi1 (3.0.2-1ubuntu0.1) ... Setting up varnish (3.0.2-1ubuntu0.1) ... install: invalid user `varnish' dpkg: error processing varnish (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: varnish note: running ubuntu 12.04 For now, I have resolved the issue by manually creating the users, and running apt-get install -f, but this does not resolve the actual issue. Any ideas?

  Read the article

• Using multiple USB webcams in Linux

  - by rachelderp

  Running more than one USB webcam in Debian/Linux results in the the following error: libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON: No space left on device What initially seemed to be a programming issue in OpenCV turned into a quest for a mysterious hardware/software problem after the same errors were produced by running cheese and xawtv. Apparently it's caused by webcams requesting all the available bandwidth on the USB host controller. With that in mind I decided to run wireshark and capinfos to see just how much bandwidth a single camera used. 4 megabits per second at 320x240 14 megabits per second at 640x480 32 megabits per second at 1920x1080 Interesting! That might explain why two cameras at 320x240 work but any higher resolution fails. It's as if my USB controller is only operating at USB 1 speeds, yet lsusb shows both webcams belonging to a device which supposedly supports 480 megabits per second. One solution proposed forcing the webcams to calculate their bandwidth usage instead of requesting their maximum by running the following commands: sudo rmmod uvcvideo sudo modprobe uvcvideo quirks=128 Unfortunately that made no difference, so I decided to try another solution. A post on StackOverflow suggested telling my webcams to use a lower FPS or compressed video format like MJPEG, but after running v4lctl list it doesn't appear either of my webcams support changing their video mode. And that's where I'm stuck. Why would two webcams operating well below the maximum speed of USB 2 would produce this error? ps: It's not a disk space issue, df displays no change when the webcams are started. pps: If it makes a difference, here's the output of lsusb

  Read the article

• Need a script/batch/program that runs a command that won't be killed when the parent is killed

  - by billc.cn

  The scenario I use Zabbix to monitor my servers and recently I wanted to add some more metrics for the Windows ones. For security reasons, I used Zabbix's User Parameter feature, but it limits the execution of external commands to about 3 seconds. After that, the command is forcibly killed. I want to run some long run commands, so I used the trick from Zabbix's forum: run the command in the background, write the results to a file and use Zabbix to collect them. This is rather easy under *nix thanks to the "&" operator, but there is no such support in Windows' shell. To make things worse, when Zabbix kills forcibly kill the cmd.exe it used to evaluate the commands, all child processes die including the unfinished background tasks. Thus I need something that can sever all the ties with its children so they won't be affected in the cascading kill. What I've tried start and start /B - They do nothing as the child always die with the parent WScript.Shell.Run as in invis.vbs from StackOverflow - Sometimes work. If the wscript process is forcibly killed as opposed to quitting on its own, the children will die as well. hstart - similar results to invis.vbs At command - This requires you to set an absolution time for the task to run as opposed to an offset, so the code would be quite messy due to the limited shell scripting capability of Windows. (Edit) PsExec.exe from the SysInternals suite - It uses a service to launch the command, so it is not affected by the kill; however, it prints some banner and log info to StdErr and there's no switch to disable this. When I use 2>NUL to redirect them, Zabbix reports an error. After trying the above in different combinations, I noticed if I call hstart from invis.vbs, the command started by the former will be left alone as a parent-less process when invis.vbs is killed. However, since I need to redirect the output, the command I want to run is always in the form of cmd.exe /c ""command" "args"" >log. The vbs also removes all the quotes, so I have to encode the command with self-defined escape sequences. The end result involves about five levels of escaping/quoting, which is almost impossible to maintain. Anyone know any better solutions? Some requirements Any bat/vbs/js/Win32 binary is acceptable Better not require multiple levels of escaping No .Net (including PowerShell) because it is not installed

  Read the article

• Windows 7: resizing the 'Save As' window

  - by Mark Miller

  I do not know whether my question is appropriate for this forum. Apologies if it is not. I am running Windows 7 Professional with Service Pack 1 on a Dell Vostro 460 PC. I am downloading journal articles from the internet and saving them as *.pdf files. Somehow I unintentionally clicked a button that resulted in the 'Save as' window filling the entire screen of my computer, except for the toolbar at the very bottom. How can I resize the 'Save as' window so it only fills perhaps somewhere around 25% of the computer screen, or whatever the default size for that window is? I have searched the internet extensively and found one or two threads about this problem, but no specific solutions were posted there. One suggestion was to grab the bottom of the window with the mouse and scroll upward until the window was the desired size. That does not appear to be possible in my case. Another suggestion was to click on the window with the middle mouse button before attempting to resize the window, but that does not appear to help in my case either. Thank you for any help. If I should post this question in a different forum here please let me know, or kindly migrate the question to the appropriate forum. If additional information is necessary before a solution can be attempted, please let me know that as well.

  Read the article

• php-cgi.exe Taking out server, multiple running

  - by Alex

  I have been using ZendServer CE for over a year and have never had a problem. Recently, about a week or two ago I have found my server to be acting up and even causing RDP to be un-connectable. After some looking around I have 20, 25, 30+ php-cgi.exe running. With my IIS7 service starting with Windows once my server started all these php-cgi.exe would start running (even though the limit is 10) and I could not even connect to it. After disabling the Web Server as startup which stops php-cgi.exe from running the server runs flawless, like it always has. As soon as I run the web server all these odd issues start. I have a post over at Zend http://forums.zend.com/viewtopic.php?f=44&t=41043&p=95133 where I was told to update my Zend install. After doing so this issue has not gone away. Even running 1 php-cgi.exe (somehow 2 start anyway) the server begins to go silly. The first issue I find myself with running php-cgi.exe is that Windows Services, weather be stock or using FireDaemon begin to lag, slow start, crash, etc. If anyone can help me with this I would GREATLY appreciate it. At this time I am forced to look for a alternative to running PHP other than cgi as it simply takes out the whole box. On another note, I run this same version of Zend on a similar server with no issues. Starting to think its a IIS issue. (UPDATE) Installed newest version of PHP, separate from Zend, same issue. Server Specs: Intel Xeon Quad w HT Nehlam Based 24GB DDR3 1333 2x1TB Raid Mirror OS 2x1TB Raid Mirror (Other) 4x2TB Raid 5 (Storage) Server 2008 R2

  Read the article

• SSL Mail server connection times out on send()

  - by Jivan

  When trying to programmatically send an email from a website of mine, with PHP Pear Mail package with SSL connection, PEAR:Mail replies the following : Failed to connect to example.blabla.net:PORT [SMTP: Failed to connect socket: connection timed out (code: -1, response: )] I looked for similar questions on SO and SF, all the answers asking the OP to test a request on telnet or ssh in command line. So, that is what I did and here is what happens : $ ssh -l myusername -p PORT example.blablabla.net _ Here, '_' in the second line means that NOTHING happens. Indefinitely, which seems coherent with the timeout message I had from PEAR:Mail. So PEAR:Mail seems out of cause. But, what I have to tell you is that yesterday, it just worked. Connection was properly established, mails were properly sent, etc. Just today, it doesn't work anymore and I absolutely don't know why. I restarted Apache (in case an extension was broken), restarted mail services, etc. Still. No effect. Before yesterday (when it worked) and today (when it doesn't anymore), I just didn't touch the server and did nothing on it, simply because I took a day off to write some blog post! Have anyone of you encountered similar problem ? The problem seems quite common, judging after some googling, but the solution doesn't. Thanks for any help ! (note on config : CentOS 6.4 x86_64 with cPanel/WHM)

  Read the article

• Run 3 monitors on two different video cards?

  - by hullot

  Can I run 3 monitors on two different video cards? I have an ATI and Nvidia brand card. The ATI has 2 HDMI connections. They both work. Both cards are also picked up in Windows, one being the ATI and the other one as the Nvidia, but it says VGA Controller, although the card only takes 2 DVi. So, one DVI cable goes into that Nvidia card. 3 Monitors, but only 2 the HDMI ones from the ATI pick up, not the third one which is connected to the Nvidia via DVI. How can I run three monitors then? I suppose I can't install both drivers, so I'm unsure what to do. Is this possible? I just want the Nvidia card to power the third screen, no gaming on it, nothing. Also the ATI is picked up as primary card as well, so no hurdle there. EDIT: Hm, just installed the Nvidia drivers and it picked up the third screen no problem. Hope there aren't any major conflicts. Will post this as an answer as correct when I'm able. Can't as a new user.

  Read the article

• Problems in Table of Contents formatting

  - by ChrisW

  Two questions about captions in Word (they are related, hence the same post): Using Word 2010 (and its inbuilt equation editor) I've got figure captions which contain equations (well, actually, they represent chemical equations, such as nitrate, for which the correct representation is NO3- where the 3 is subscript and the - is superscript, but in the same column). However, when I generate a figure list, the equation displays as NO3- (with no subscript or superscript) - Word knows it's an equation though (the Equation Tools design ribbon/tab is displayed when I click on the NO3-). I've tried changing it from Professional to Linear and similar other obvious options, but still can't get it to display correctly. File to show this problem in action: http://dl.dropbox.com/u/101867759/EqtnTest.docx - note how the (chemical) equation for nitrate is rendered correctly in the 'caption' on Page 2, but not in the ToC on page 1. I have another caption where the whole figure is included in my list of figures. When I double click on the caption in my text, the caption is highlighted (as expected), but so is the figure (this doesn't happen with any of my other figures) so I assume that the figure has been 'linked' in some way to the text - how do I remove this link?

  Read the article

• Utilu IE Collection IE6 crashes under Windows 7

  - by Aron

  I've installed Utilu IE Collection under Windows 7 64-bit, but am unable to successfully run IE6 (specifically, "Internet Explorer 6.0 (6.00.2900.2180)"). I haven't tried other versions of IE from the package, so their behavior is unknown. It starts up fine, but the address bar isn't shown. (Attempted to post image, but I'm a newbie on SU and it wouldn't let me. Can be found here.) View-Toolbars shows 'Address Bar' already selected. If I try to (de-)select Address Bar in that list, it crashes: Problem signature: Problem Event Name: APPCRASH Application Name: iexplore.exe Application Version: 6.0.2900.2180 Application Timestamp: 41107b81 Fault Module Name: StackHash_e162 Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Code: c0000005 Exception Offset: 00000000 OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 Additional Information 1: e162 Additional Information 2: e1625455580a00d3fda64a8cdf366fbb Additional Information 3: 58c7 Additional Information 4: 58c75753c6745fad91929ab6430a83fa That's not all that's wrong ('Search' pane has no contents as well, probably more), but it's the most glaring problem. I've seen some allusions to a registry change needed to fix this, but haven't been able to find any details. Anybody? I'm running the latest version of the collection, 1.7.0.6.

  Read the article

• How to use non-free drivers during debian install

  - by blokeley

  I'm trying to install debian stable using unetbootin. The install process fails with "network autoconfiguration failed", probably due to the ethernet driver not working. My Lenovo U350 has a Broadcom BCM57780 which does not seem to be supported out-of-the-box: there are various bug reports here, here and here, but I don't know if the fix has made it into debian (6) stable. One discussion says that you have to use an ethernet driver from the firmware-linux-nonfree package. I'm not sure that this is correct because the BCM57780 is not in the list of drivers in firmware-linux-nonfree. The specific question tree is: Is BCM57780 supported in debian stable? If so, what could be wrong? Should I install debian unstable instead? If not, do I need to use firmware-linux-nonfree during installation and, if so, how do I do this? Please note: I've used ubuntu and debian loads in the past but please post line-by-line guidance rather than some cryptic abbreviation of any instructions. Thanks in advance for any help. Updates: Debian stable with non-free drivers did not work. Debian unstable (free drivers only) did not work. Tried loading firmware-iwlwifi_0.28_all.deb from another USB stick to get wireless working rather than BCM57780. The .deb file was found but the network configuration still failed! That's it, I'm giving up. Unfortunately I'll use ubuntu even though the Unity user interface will be very unstable for the next couple of years :(

  Read the article

• Unexpected behaviour in a Lotus Notes programmable table

  - by Mark B

  I'm designing a workflow database in Lotus Notes 6.0.3 (soon upgrading to 8.5), and my OS is Windows XP. I have recently tried converting a tabbed table into a programmable one. This was so that I could control which tab was displayed to the user when it was opened, so that they were presented with the most appropriate one for that document's progress through the workflow. That part of it works! One of the tabs features a radio button that controls visibility of the next tab, and a pair of cascading dialogue boxes. One contains the static list "Person":"Team", and the other has a formula based on the first: view:=@If(PeerReview = "Team"; "GroupNames"; "GroupMembers"); @Unique(@DbColumn(""; ""; view; 1)) The dialogue boxes have the property "Refresh fields on keyword change" selected. The behaviour that I wasn't expecting is this. If the radio button is set to "Yes" and a value is selected in one of the dialogue boxes, the table opens the next tab. If the radio button is set to "No" and a value is selected in one of the dialogue boxes, the entire table is hidden. I can duplicate the latter by switching off the "Refresh fields on keyword change" property on the dialogue boxes and instead pressing F9 after selecting a value. I have no idea why the former occurs, though. The table is called "RFCInfo", and I have a field on the form called "$RFCInfo" which is editable, hidden from all users who aren't me and initially set by a Postopen script, which I can post if necessary - it's essentially a Select Case statement that looks at a particular item value and returns the name of the table row relating to that value. Can anyone offer any pointers?

  Read the article

• can't change wallpaper real time regedit commands

  - by itagomo

  i'm a first time 'SuperUser' poster .. what i want is to programatically change Desktop Wallpaper every few hours .. i'm using a batch file (.bat) and don't want to use other languages or programs, just the pre-installed stuffs with Windows XP .. i've already made my script that will modify values in the Registry reg add "HKCU\Control Panel\Desktop" /v Wallpaper /d "C:\Pictures\picture1.jpg" but it's not taking effect real time even with this command: RUNDLL32.EXE USER32.DLL,UpdatePerUserSystemParameters ,1 ,True need to reboot first to take effect. if i'm going to use Display Properties, it'll show at once. what i've noticed is that changes will take effect real time if it's a .bmp file and not for .jpg images. Second option is to convert JPG to 24-bit BMP files (to look exactly the same, but will triple the file size), but i'm hoping a better way .. i've already googled things but no avail.. i hope you (the helpful reader) can post any .bat or even vbs script to change Desktop Wallpaper instantly with JPG pictures .. hoping there's an answer without installing other apps or scripts ..

  Read the article

• Can not connect remotely to MySQL Server on Ubuntu 10.10

  - by BobFranz

  Ok I have searched google for two days trying to get this to work. Here are the steps I have taken so far: Clean install of Ubuntu 10.10 Install mysql 5.1 as well as admin Comment out the bind address in the config file Create a new database Create a new user that is username@% to allow remote connections Grant all access to this user to the new database EXCEPT the grant option Login on the server is ok using this new user and database on the localhost Login on the server is ok using this new user and database on the server internal network ip Login from a remote computer is ok using this new user and database using the internal network ip Login is not working when logging in with this username and database using the external ip address from the server or the remote computer. I have port forwarding enabled for this port and it is viewable from outside as confirmed by canyouseeme.org I have nmap'd using the following command on the internal ip and get the below result: nmap -PN -p 3306 192.168.1.73 Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:41 PST Nmap scan report for computername-System-Name (192.168.1.73) Host is up (0.00064s latency). PORT STATE SERVICE 3306/tcp open mysql Nmap done: 1 IP address (1 host up) scanned in 0.23 seconds I have nmap'd using the following command on the internal ip and get the below result(I have hidden ip for obvious reasons): nmap -PN -p 3306 xxx.xxx.xx.xxx Starting Nmap 5.21 ( http://nmap.org ) at 2011-02-19 13:42 PST Nmap scan report for HOSTNAME (xxx.xxx.xx.xxx) Host is up (0.00056s latency). PORT STATE SERVICE 3306/tcp closed mysql Nmap done: 1 IP address (1 host up) scanned in 0.21 seconds I am completely stuck here and need some help. I have tried everything under the moon and still can not connect from a remote external ip address. Any help is greatly appreciated and I need to do anything to help find the problem let me know and I will post the results here.

  Read the article

• Route outbound connections from local network through VPN

  - by Sharkos

  I have a server A running OpenVPN, an OpenVPN client B (a rooted Android phone as it happens) and a third party C (a laptop, tablet etc.) tethered to B. B can use the VPN to access the internet via A; C can use the tethered connection WITHOUT the VPN to access the internet via B. However, with the VPN on B active, I cannot load information from the internet on C. A appears to log similar traffic inbound and outbound when B or C attempt to load a webpage, say, but the VPN on device B reports no inbound traffic when the connection originated from C. Where should I look for packets being dropped, and what ip rules should I use to make sure they are passed back through the VPN and into the local network B <- C? (I'll obviously post whatever further information is needed.) Further info Without VPN: root@android:/ # ip route default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 With VPN: root@android:/ # ip route 0.0.0.0/1 dev tun0 scope link default via [B's External Gateway] dev rmnet0 [B's External Subnet] dev rmnet0 proto kernel scope link src [B's External IP] [B's External Gateway] dev rmnet0 scope link [External address of A] dev tun0 scope link 128.0.0.0/1 dev tun0 scope link 172.16.0.0/24 dev tun0 scope link 172.16.0.8/30 dev tun0 proto kernel scope link src 172.16.0.10 192.168.43.0/24 dev wlan0 proto kernel scope link src 192.168.43.1 192.168.168.0/24 dev tun0 scope link

  Read the article

• Nginx Removes the index.php from URL

  - by codeHead

  I have a codeigniter php application on nginx. It works as expected on Apache but after moving to nginx, I noticed that the index.php is automatically removed from the URL in all my links. Infact when I try using index.php it does not go to the desired URL but gets redirected to my default controller. below is a coopy of my nginx.conf file. server{ listen 80; server_name mydomainname.com; root /var/www/domain/current; # index index.php; error_log /var/log/nginx/error.log; access_log /var/log/nginx/access.log main; location / { # Check if a file or directory index file exists, else route it to index.php. try_files $uri $uri/ /index.php ; } location ~* \.php { fastcgi_pass backend; include fastcgi.conf; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_read_timeout 500; #fastcgi_param SCRIPT_FILENAME $document_root/index.php; add_header Expires "Thu, 01 Jan 1970 00:00:01 GMT"; add_header Cache-Control "no-cache, no-store, private, proxy-revalidate, must-revalidate, post-check=0, pre-check=0"; add_header Pragma no-cache; add_header X-Served-By $hostname; } location ~* ^.+\.(css|js)$ { expires 7d; add_header Pragma public; add_header Cache-Control "public"; } # set expiration of assets to MAX for caching location ~* \.(ico|gif|jpe?g|png)(\?[0-9]+)?$ { expires max; log_not_found on; } } I need to use my URL With the index.php -- please help.

  Read the article

< Previous Page | 834 835 836 837 838 839 840 841 842 843 844 845  | Next Page >