Search Results

Search found 9701 results on 389 pages for 'row minds'.

Page 84/389 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• The SSIS tuning tip that everyone misses

  - by Rob Farley

  I know that everyone misses this, because I’m yet to find someone who doesn’t have a bit of an epiphany when I describe this. When tuning Data Flows in SQL Server Integration Services, people see the Data Flow as moving from the Source to the Destination, passing through a number of transformations. What people don’t consider is the Source, getting the data out of a database. Remember, the source of data for your Data Flow is not your Source Component. It’s wherever the data is, within your database, probably on a disk somewhere. You need to tune your query to optimise it for SSIS, and this is what most people fail to do. I’m not suggesting that people don’t tune their queries – there’s plenty of information out there about making sure that your queries run as fast as possible. But for SSIS, it’s not about how fast your query runs. Let me say that again, but in bolder text: The speed of an SSIS Source is not about how fast your query runs. If your query is used in a Source component for SSIS, the thing that matters is how fast it starts returning data. In particular, those first 10,000 rows to populate that first buffer, ready to pass down the rest of the transformations on its way to the Destination. Let’s look at a very simple query as an example, using the AdventureWorks database: We’re picking the different Weight values out of the Product table, and it’s doing this by scanning the table and doing a Sort. It’s a Distinct Sort, which means that the duplicates are discarded. It'll be no surprise to see that the data produced is sorted. Obvious, I know, but I'm making a comparison to what I'll do later. Before I explain the problem here, let me jump back into the SSIS world... If you’ve investigated how to tune an SSIS flow, then you’ll know that some SSIS Data Flow Transformations are known to be Blocking, some are Partially Blocking, and some are simply Row transformations. Take the SSIS Sort transformation, for example. I’m using a larger data set for this, because my small list of Weights won’t demonstrate it well enough. Seven buffers of data came out of the source, but none of them could be pushed past the Sort operator, just in case the last buffer contained the data that would be sorted into the first buffer. This is a blocking operation. Back in the land of T-SQL, we consider our Distinct Sort operator. It’s also blocking. It won’t let data through until it’s seen all of it. If you weren’t okay with blocking operations in SSIS, why would you be happy with them in an execution plan? The source of your data is not your OLE DB Source. Remember this. The source of your data is the NCIX/CIX/Heap from which it’s being pulled. Picture it like this... the data flowing from the Clustered Index, through the Distinct Sort operator, into the SELECT operator, where a series of SSIS Buffers are populated, flowing (as they get full) down through the SSIS transformations. Alright, I know that I’m taking some liberties here, because the two queries aren’t the same, but consider the visual. The data is flowing from your disk and through your execution plan before it reaches SSIS, so you could easily find that a blocking operation in your plan is just as painful as a blocking operation in your SSIS Data Flow. Luckily, T-SQL gives us a brilliant query hint to help avoid this. OPTION (FAST 10000) This hint means that it will choose a query which will optimise for the first 10,000 rows – the default SSIS buffer size. And the effect can be quite significant. First let’s consider a simple example, then we’ll look at a larger one. Consider our weights. We don’t have 10,000, so I’m going to use OPTION (FAST 1) instead. You’ll notice that the query is more expensive, using a Flow Distinct operator instead of the Distinct Sort. This operator is consuming 84% of the query, instead of the 59% we saw from the Distinct Sort. But the first row could be returned quicker – a Flow Distinct operator is non-blocking. The data here isn’t sorted, of course. It’s in the same order that it came out of the index, just with duplicates removed. As soon as a Flow Distinct sees a value that it hasn’t come across before, it pushes it out to the operator on its left. It still has to maintain the list of what it’s seen so far, but by handling it one row at a time, it can push rows through quicker. Overall, it’s a lot more work than the Distinct Sort, but if the priority is the first few rows, then perhaps that’s exactly what we want. The Query Optimizer seems to do this by optimising the query as if there were only one row coming through: This 1 row estimation is caused by the Query Optimizer imagining the SELECT operation saying “Give me one row” first, and this message being passed all the way along. The request might not make it all the way back to the source, but in my simple example, it does. I hope this simple example has helped you understand the significance of the blocking operator. Now I’m going to show you an example on a much larger data set. This data was fetching about 780,000 rows, and these are the Estimated Plans. The data needed to be Sorted, to support further SSIS operations that needed that. First, without the hint. ...and now with OPTION (FAST 10000): A very different plan, I’m sure you’ll agree. In case you’re curious, those arrows in the top one are 780,000 rows in size. In the second, they’re estimated to be 10,000, although the Actual figures end up being 780,000. The top one definitely runs faster. It finished several times faster than the second one. With the amount of data being considered, these numbers were in minutes. Look at the second one – it’s doing Nested Loops, across 780,000 rows! That’s not generally recommended at all. That’s “Go and make yourself a coffee” time. In this case, it was about six or seven minutes. The faster one finished in about a minute. But in SSIS-land, things are different. The particular data flow that was consuming this data was significant. It was being pumped into a Script Component to process each row based on previous rows, creating about a dozen different flows. The data flow would take roughly ten minutes to run – ten minutes from when the data first appeared. The query that completes faster – chosen by the Query Optimizer with no hints, based on accurate statistics (rather than pretending the numbers are smaller) – would take a minute to start getting the data into SSIS, at which point the ten-minute flow would start, taking eleven minutes to complete. The query that took longer – chosen by the Query Optimizer pretending it only wanted the first 10,000 rows – would take only ten seconds to fill the first buffer. Despite the fact that it might have taken the database another six or seven minutes to get the data out, SSIS didn’t care. Every time it wanted the next buffer of data, it was already available, and the whole process finished in about ten minutes and ten seconds. When debugging SSIS, you run the package, and sit there waiting to see the Debug information start appearing. You look for the numbers on the data flow, and seeing operators going Yellow and Green. Without the hint, I’d sit there for a minute. With the hint, just ten seconds. You can imagine which one I preferred. By adding this hint, it felt like a magic wand had been waved across the query, to make it run several times faster. It wasn’t the case at all – but it felt like it to SSIS.

  Read the article

• Conway's Game of Life - C++ and Qt

  - by Jeff Bridge

  I've done all of the layouts and have most of the code written even. But, I'm stuck in two places. 1) I'm not quite sure how to set up the timer. Am I using it correctly in the gridwindow class? And, am I used the timer functions/signals/slots correctly with the other gridwindow functions. 2) In GridWindow's timerFired() function, I'm having trouble checking/creating the vector-vectors. I wrote out in the comments in that function exactly what I am trying to do. Any help would be much appreciated. main.cpp // Main file for running the grid window application. #include <QApplication> #include "gridwindow.h" //#include "timerwindow.h" #include <stdexcept> #include <string> #include <fstream> #include <sstream> #include <iostream> void Welcome(); // Welcome Function - Prints upon running program; outputs program name, student name/id, class section. void Rules(); // Rules Function: Prints the rules for Conway's Game of Life. using namespace std; // A simple main method to create the window class and then pop it up on the screen. int main(int argc, char *argv[]) { Welcome(); // Calls Welcome function to print student/assignment info. Rules(); // Prints Conway's Game Rules. QApplication app(argc, argv); // Creates the overall windowed application. int rows = 25, cols = 35; //The number of rows & columns in the game grid. GridWindow widget(NULL,rows,cols); // Creates the actual window (for the grid). widget.show(); // Shows the window on the screen. return app.exec(); // Goes into visual loop; starts executing GUI. } // Welcome Function: Prints my name/id, my class number, the assignment, and the program name. void Welcome() { cout << endl; cout << "-------------------------------------------------------------------------------------------------" << endl; cout << "Name/ID - Gabe Audick #7681539807" << endl; cout << "Class/Assignment - CSCI-102 Disccusion 29915: Homework Assignment #4" << endl; cout << "-------------------------------------------------------------------------------------------------" << endl << endl; } // Rules Function: Prints the rules for Conway's Game of Life. void Rules() { cout << "Welcome to Conway's Game of Life." << endl; cout << "Game Rules:" << endl; cout << "\t 1) Any living cell with fewer than two living neighbours dies, as if caused by underpopulation." << endl; cout << "\t 2) Any live cell with more than three live neighbours dies, as if by overcrowding." << endl; cout << "\t 3) Any live cell with two or three live neighbours lives on to the next generation." << endl; cout << "\t 4) Any dead cell with exactly three live neighbours becomes a live cell." << endl << endl; cout << "Enjoy." << endl << endl; } gridcell.h // A header file for a class representing a single cell in a grid of cells. #ifndef GRIDCELL_H_ #define GRIDCELL_H_ #include <QPalette> #include <QColor> #include <QPushButton> #include <Qt> #include <QWidget> #include <QFrame> #include <QHBoxLayout> #include <iostream> // An enum representing the two different states a cell can have. enum CellType { DEAD, // DEAD = Dead Cell. --> Color = White. LIVE // LIVE = Living Cell. ---> Color = White. }; /* Class: GridCell. A class representing a single cell in a grid. Each cell is implemented as a QT QFrame that contains a single QPushButton. The button is sized so that it takes up the entire frame. Each cell also keeps track of what type of cell it is based on the CellType enum. */ class GridCell : public QFrame { Q_OBJECT // Macro allowing us to have signals & slots on this object. private: QPushButton* button; // The button inside the cell that gives its clickability. CellType type; // The type of cell (DEAD or LIVE.) public slots: void handleClick(); // Callback for handling a click on the current cell. void setType(CellType type); // Cell type mutator. Calls the "redrawCell" function. signals: void typeChanged(CellType type); // Signal to notify listeners when the cell type has changed. public: GridCell(QWidget *parent = NULL); // Constructor for creating a cell. Takes parent widget or default parent to NULL. virtual ~GridCell(); // Destructor. void redrawCell(); // Redraws cell: Sets new type/color. CellType getType() const; //Simple getter for the cell type. private: Qt::GlobalColor getColorForCellType(); // Helper method. Returns color that cell should be based from its value. }; #endif gridcell.cpp #include <iostream> #include "gridcell.h" #include "utility.h" using namespace std; // Constructor: Creates a grid cell. GridCell::GridCell(QWidget *parent) : QFrame(parent) { this->type = DEAD; // Default: Cell is DEAD (white). setFrameStyle(QFrame::Box); // Set the frame style. This is what gives each box its black border. this->button = new QPushButton(this); //Creates button that fills entirety of each grid cell. this->button->setSizePolicy(QSizePolicy::Expanding,QSizePolicy::Expanding); // Expands button to fill space. this->button->setMinimumSize(19,19); //width,height // Min height and width of button. QHBoxLayout *layout = new QHBoxLayout(); //Creates a simple layout to hold our button and add the button to it. layout->addWidget(this->button); setLayout(layout); layout->setStretchFactor(this->button,1); // Lets the buttons expand all the way to the edges of the current frame with no space leftover layout->setContentsMargins(0,0,0,0); layout->setSpacing(0); connect(this->button,SIGNAL(clicked()),this,SLOT(handleClick())); // Connects clicked signal with handleClick slot. redrawCell(); // Calls function to redraw (set new type for) the cell. } // Basic destructor. GridCell::~GridCell() { delete this->button; } // Accessor for the cell type. CellType GridCell::getType() const { return(this->type); } // Mutator for the cell type. Also has the side effect of causing the cell to be redrawn on the GUI. void GridCell::setType(CellType type) { this->type = type; redrawCell(); } // Handler slot for button clicks. This method is called whenever the user clicks on this cell in the grid. void GridCell::handleClick() { // When clicked on... if(this->type == DEAD) // If type is DEAD (white), change to LIVE (black). type = LIVE; else type = DEAD; // If type is LIVE (black), change to DEAD (white). setType(type); // Sets new type (color). setType Calls redrawCell() to recolor. } // Method to check cell type and return the color of that type. Qt::GlobalColor GridCell::getColorForCellType() { switch(this->type) { default: case DEAD: return Qt::white; case LIVE: return Qt::black; } } // Helper method. Forces current cell to be redrawn on the GUI. Called whenever the setType method is invoked. void GridCell::redrawCell() { Qt::GlobalColor gc = getColorForCellType(); //Find out what color this cell should be. this->button->setPalette(QPalette(gc,gc)); //Force the button in the cell to be the proper color. this->button->setAutoFillBackground(true); this->button->setFlat(true); //Force QT to NOT draw the borders on the button } gridwindow.h // A header file for a QT window that holds a grid of cells. #ifndef GRIDWINDOW_H_ #define GRIDWINDOW_H_ #include <vector> #include <QWidget> #include <QTimer> #include <QGridLayout> #include <QLabel> #include <QApplication> #include "gridcell.h" /* class GridWindow: This is the class representing the whole window that comes up when this program runs. It contains a header section with a title, a middle section of MxN cells and a bottom section with buttons. */ class GridWindow : public QWidget { Q_OBJECT // Macro to allow this object to have signals & slots. private: std::vector<std::vector<GridCell*> > cells; // A 2D vector containing pointers to all the cells in the grid. QLabel *title; // A pointer to the Title text on the window. QTimer *timer; // Creates timer object. public slots: void handleClear(); // Handler function for clicking the Clear button. void handleStart(); // Handler function for clicking the Start button. void handlePause(); // Handler function for clicking the Pause button. void timerFired(); // Method called whenever timer fires. public: GridWindow(QWidget *parent = NULL,int rows=3,int cols=3); // Constructor. virtual ~GridWindow(); // Destructor. std::vector<std::vector<GridCell*> >& getCells(); // Accessor for the array of grid cells. private: QHBoxLayout* setupHeader(); // Helper function to construct the GUI header. QGridLayout* setupGrid(int rows,int cols); // Helper function to constructor the GUI's grid. QHBoxLayout* setupButtonRow(); // Helper function to setup the row of buttons at the bottom. }; #endif gridwindow.cpp #include <iostream> #include "gridwindow.h" using namespace std; // Constructor for window. It constructs the three portions of the GUI and lays them out vertically. GridWindow::GridWindow(QWidget *parent,int rows,int cols) : QWidget(parent) { QHBoxLayout *header = setupHeader(); // Setup the title at the top. QGridLayout *grid = setupGrid(rows,cols); // Setup the grid of colored cells in the middle. QHBoxLayout *buttonRow = setupButtonRow(); // Setup the row of buttons across the bottom. QVBoxLayout *layout = new QVBoxLayout(); // Puts everything together. layout->addLayout(header); layout->addLayout(grid); layout->addLayout(buttonRow); setLayout(layout); } // Destructor. GridWindow::~GridWindow() { delete title; } // Builds header section of the GUI. QHBoxLayout* GridWindow::setupHeader() { QHBoxLayout *header = new QHBoxLayout(); // Creates horizontal box. header->setAlignment(Qt::AlignHCenter); this->title = new QLabel("CONWAY'S GAME OF LIFE",this); // Creates big, bold, centered label (title): "Conway's Game of Life." this->title->setAlignment(Qt::AlignHCenter); this->title->setFont(QFont("Arial", 32, QFont::Bold)); header->addWidget(this->title); // Adds widget to layout. return header; // Returns header to grid window. } // Builds the grid of cells. This method populates the grid's 2D array of GridCells with MxN cells. QGridLayout* GridWindow::setupGrid(int rows,int cols) { QGridLayout *grid = new QGridLayout(); // Creates grid layout. grid->setHorizontalSpacing(0); // No empty spaces. Cells should be contiguous. grid->setVerticalSpacing(0); grid->setSpacing(0); grid->setAlignment(Qt::AlignHCenter); for(int i=0; i < rows; i++) //Each row is a vector of grid cells. { std::vector<GridCell*> row; // Creates new vector for current row. cells.push_back(row); for(int j=0; j < cols; j++) { GridCell *cell = new GridCell(); // Creates and adds new cell to row. cells.at(i).push_back(cell); grid->addWidget(cell,i,j); // Adds to cell to grid layout. Column expands vertically. grid->setColumnStretch(j,1); } grid->setRowStretch(i,1); // Sets row expansion horizontally. } return grid; // Returns grid. } // Builds footer section of the GUI. QHBoxLayout* GridWindow::setupButtonRow() { QHBoxLayout *buttonRow = new QHBoxLayout(); // Creates horizontal box for buttons. buttonRow->setAlignment(Qt::AlignHCenter); // Clear Button - Clears cell; sets them all to DEAD/white. QPushButton *clearButton = new QPushButton("CLEAR"); clearButton->setFixedSize(100,25); connect(clearButton, SIGNAL(clicked()), this, SLOT(handleClear())); buttonRow->addWidget(clearButton); // Start Button - Starts game when user clicks. Or, resumes game after being paused. QPushButton *startButton = new QPushButton("START/RESUME"); startButton->setFixedSize(100,25); connect(startButton, SIGNAL(clicked()), this, SLOT(handleStart())); buttonRow->addWidget(startButton); // Pause Button - Pauses simulation of game. QPushButton *pauseButton = new QPushButton("PAUSE"); pauseButton->setFixedSize(100,25); connect(pauseButton, SIGNAL(clicked()), this, SLOT(handlePause())); buttonRow->addWidget(pauseButton); // Quit Button - Exits program. QPushButton *quitButton = new QPushButton("EXIT"); quitButton->setFixedSize(100,25); connect(quitButton, SIGNAL(clicked()), qApp, SLOT(quit())); buttonRow->addWidget(quitButton); return buttonRow; // Returns bottom of layout. } /* SLOT method for handling clicks on the "clear" button. Receives "clicked" signals on the "Clear" button and sets all cells to DEAD. */ void GridWindow::handleClear() { for(unsigned int row=0; row < cells.size(); row++) // Loops through current rows' cells. { for(unsigned int col=0; col < cells[row].size(); col++) { GridCell *cell = cells[row][col]; // Grab the current cell & set its value to dead. cell->setType(DEAD); } } } /* SLOT method for handling clicks on the "start" button. Receives "clicked" signals on the "start" button and begins game simulation. */ void GridWindow::handleStart() { this->timer = new QTimer(this); // Creates new timer. connect(this->timer, SIGNAL(timeout()), this, SLOT(timerFired())); // Connect "timerFired" method class to the "timeout" signal fired by the timer. this->timer->start(500); // Timer to fire every 500 milliseconds. } /* SLOT method for handling clicks on the "pause" button. Receives "clicked" signals on the "pause" button and stops the game simulation. */ void GridWindow::handlePause() { this->timer->stop(); // Stops the timer. delete this->timer; // Deletes timer. } // Accessor method - Gets the 2D vector of grid cells. std::vector<std::vector<GridCell*> >& GridWindow::getCells() { return this->cells; } void GridWindow::timerFired() { // I'm not sure how to write this code. // I want to take the original vector-vector, and also make a new, empty vector-vector of the same size. // I would then go through the code below with the original vector, and apply the rules to the new vector-vector. // Finally, I would make the new vector-vecotr the original vector-vector. (That would be one step in the simulation.) cout << cells[1][2]; /* for (unsigned int m = 0; m < original.size(); m++) { for (unsigned int n = 0; n < original.at(m).size(); n++) { unsigned int neighbors = 0; //Begin counting number of neighbors. if (original[m-1][n-1].getType() == LIVE) // If a cell next to [i][j] is LIVE, add one to the neighbor count. neighbors += 1; if (original[m-1][n].getType() == LIVE) neighbors += 1; if (original[m-1][n+1].getType() == LIVE) neighbors += 1; if (original[m][n-1].getType() == LIVE) neighbors += 1; if (original[m][n+1].getType() == LIVE) neighbors += 1; if (original[m+1][n-1].getType() == LIVE) neighbors += 1; if (original[m+1][n].getType() == LIVE) neighbors += 1; if (original[m+1][n+1].getType() == LIVE) neighbors += 1; if (original[m][n].getType() == LIVE && neighbors < 2) // Apply game rules to cells: Create new, updated grid with the roundtwo vector. roundtwo[m][n].setType(LIVE); else if (original[m][n].getType() == LIVE && neighbors > 3) roundtwo[m][n].setType(DEAD); else if (original[m][n].getType() == LIVE && (neighbors == 2 || neighbors == 3)) roundtwo[m][n].setType(LIVE); else if (original[m][n].getType() == DEAD && neighbors == 3) roundtwo[m][n].setType(LIVE); } }*/ }

  Read the article

• Value cannot be null, ArgumentNullException

  - by Wooolie

  I am currently trying to return an array which contains information about a seat at a theate such as Seat number, Name, Price and Status. I am using a combobox where I want to list all vacant or reserved seats based upon choice. When I choose reserved seats in my combobox, I call upon a method using AddRange. This method is supposed to loop through an array containing all seats and their information. If a seat is Vacant, I add it to an array. When all is done, I return this array. However, I am dealing with a ArgumentNullException. MainForm namespace Assignment4 { public partial class MainForm : Form { // private const int totNumberOfSeats = 240; private SeatManager seatMngr; private const int columns = 10; private const int rows = 10; public enum DisplayOptions { AllSeats, VacantSeats, ReservedSeats } public MainForm() { InitializeComponent(); seatMngr = new SeatManager(rows, columns); InitializeGUI(); } /// <summary> /// Fill the listbox with information from the beginning, /// let the user be able to choose from vacant seats. /// </summary> private void InitializeGUI() { rbReserve.Checked = true; txtName.Text = string.Empty; txtPrice.Text = string.Empty; lblTotalSeats.Text = seatMngr.GetNumOfSeats().ToString(); cmbOptions.Items.AddRange(Enum.GetNames(typeof(DisplayOptions))); cmbOptions.SelectedIndex = 0; UpdateGUI(); } /// <summary> /// call on methods ValidateName and ValidatePrice with arguments /// </summary> /// <param name="name"></param> /// <param name="price"></param> /// <returns></returns> private bool ValidateInput(out string name, out double price) { bool nameOK = ValidateName(out name); bool priceOK = ValidatePrice(out price); return nameOK && priceOK; } /// <summary> /// Validate name using inputUtility, show error if input is invalid /// </summary> /// <param name="name"></param> /// <returns></returns> private bool ValidateName(out string name) { name = txtName.Text.Trim(); if (!InputUtility.ValidateString(name)) { //inform user MessageBox.Show("Input of name is Invalid. It can not be empty, " + Environment.NewLine + "and must have at least one character.", " Error!"); txtName.Focus(); txtName.Text = " "; txtName.SelectAll(); return false; } return true; } /// <summary> /// Validate price using inputUtility, show error if input is invalid /// </summary> /// <param name="price"></param> /// <returns></returns> private bool ValidatePrice(out double price) { // show error if input is invalid if (!InputUtility.GetDouble(txtPrice.Text.Trim(), out price, 0)) { //inform user MessageBox.Show("Input of price is Invalid. It can not be less than 0, " + Environment.NewLine + "and must not be empty.", " Error!"); txtPrice.Focus(); txtPrice.Text = " "; txtPrice.SelectAll(); return false; } return true; } /// <summary> /// Check if item is selected in listbox /// </summary> /// <returns></returns> private bool CheckSelectedIndex() { int index = lbSeats.SelectedIndex; if (index < 0) { MessageBox.Show("Please select an item in the box"); return false; } else return true; } /// <summary> /// Call method ReserveOrCancelSeat when button OK is clicked /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void btnOK_Click(object sender, EventArgs e) { ReserveOrCancelSeat(); } /// <summary> /// Reserve or cancel seat depending on choice the user makes. Update GUI after choice. /// </summary> private void ReserveOrCancelSeat() { if (CheckSelectedIndex() == true) { string name = string.Empty; double price = 0.0; int selectedSeat = lbSeats.SelectedIndex; bool reserve = false; bool cancel = false; if (rbReserve.Checked) { DialogResult result = MessageBox.Show("Do you want to continue?", "Approve", MessageBoxButtons.YesNo); if (result == DialogResult.Yes) { if (ValidateInput(out name, out price)) { reserve = seatMngr.ReserveSeat(name, price, selectedSeat); if (reserve == true) { MessageBox.Show("Seat has been reserved"); UpdateGUI(); } else { MessageBox.Show("Seat has already been reserved"); } } } } else { DialogResult result = MessageBox.Show("Do you want to continue?", "Approve", MessageBoxButtons.YesNo); if (result == DialogResult.Yes) { cancel = seatMngr.CancelSeat(selectedSeat); if (cancel == true) { MessageBox.Show("Seat has been cancelled"); UpdateGUI(); } else { MessageBox.Show("Seat is already vacant"); } } } UpdateGUI(); } } /// <summary> /// Update GUI with new information. /// </summary> /// <param name="customerName"></param> /// <param name="price"></param> private void UpdateGUI() { lbSeats.Items.Clear(); lbSeats.Items.AddRange(seatMngr.GetSeatInfoString()); lblVacantSeats.Text = seatMngr.GetNumOfVacant().ToString(); lblReservedSeats.Text = seatMngr.GetNumOfReserved().ToString(); if (rbReserve.Checked) { txtName.Text = string.Empty; txtPrice.Text = string.Empty; } } /// <summary> /// set textboxes to false if cancel reservation button is checked /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void rbCancel_CheckedChanged_1(object sender, EventArgs e) { txtName.Enabled = false; txtPrice.Enabled = false; } /// <summary> /// set textboxes to true if reserved radiobutton is checked /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void rbReserve_CheckedChanged_1(object sender, EventArgs e) { txtName.Enabled = true; txtPrice.Enabled = true; } /// <summary> /// Make necessary changes on the list depending on what choice the user makes. Show only /// what the user wants to see, whether its all seats, reserved seats or vacant seats only. /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void cmbOptions_SelectedIndexChanged(object sender, EventArgs e) { if (cmbOptions.SelectedIndex == 0 && rbReserve.Checked) //All seats visible. { UpdateGUI(); txtName.Enabled = true; txtPrice.Enabled = true; btnOK.Enabled = true; } else if (cmbOptions.SelectedIndex == 0 && rbCancel.Checked) { UpdateGUI(); txtName.Enabled = false; txtPrice.Enabled = false; btnOK.Enabled = true; } else if (cmbOptions.SelectedIndex == 1) //Only vacant seats visible. { lbSeats.Items.Clear(); lbSeats.Items.AddRange(seatMngr.ReturnVacantSeats()); // Value cannot be null txtName.Enabled = false; txtPrice.Enabled = false; btnOK.Enabled = false; } else if (cmbOptions.SelectedIndex == 2) //Only reserved seats visible. { lbSeats.Items.Clear(); lbSeats.Items.AddRange(seatMngr.ReturnReservedSeats()); // Value cannot be null txtName.Enabled = false; txtPrice.Enabled = false; btnOK.Enabled = false; } } } } SeatManager namespace Assignment4 { class SeatManager { private string[,] nameList = null; private double[,] priceList = null; private string[,] seatList = null; private readonly int totCols; private readonly int totRows; /// <summary> /// Constructor with declarations of size for all arrays. /// </summary> /// <param name="totNumberOfSeats"></param> public SeatManager(int row, int cols) { totCols = cols; totRows = row; nameList = new string[row, cols]; priceList = new double[row, cols]; seatList = new string[row, cols]; for (int rows = 0; rows < row; rows++) { for (int col = 0; col < totCols; col++) { seatList[rows, col] = "Vacant"; } } } /// <summary> /// Check if index is within bounds of the array /// </summary> /// <param name="index"></param> /// <returns></returns> private bool CheckIndex(int index) { if (index >= 0 && index < nameList.Length) return true; else return false; } /// <summary> /// Return total number of seats /// </summary> /// <returns></returns> public int GetNumOfSeats() { int count = 0; for (int rows = 0; rows < totRows; rows++) { for (int cols = 0; cols < totCols; cols++) { count++; } } return count; } /// <summary> /// Calculate and return total number of reserved seats /// </summary> /// <returns></returns> public int GetNumOfReserved() { int totReservedSeats = 0; for (int rows = 0; rows < totRows; rows++) { for (int col = 0; col < totCols; col++) { if (!string.IsNullOrEmpty(nameList[rows, col])) { totReservedSeats++; } } } return totReservedSeats; } /// <summary> /// Calculate and return total number of vacant seats /// </summary> /// <returns></returns> public int GetNumOfVacant() { int totVacantSeats = 0; for (int rows = 0; rows < totRows; rows++) { for (int col = 0; col < totCols; col++) { if (string.IsNullOrEmpty(nameList[rows, col])) { totVacantSeats++; } } } return totVacantSeats; } /// <summary> /// Return formated string with info about the seat, name, price and its status /// </summary> /// <param name="index"></param> /// <returns></returns> public string GetSeatInfoAt(int index) { int cols = ReturnColumn(index); int rows = ReturnRow(index); string strOut = string.Format("{0,2} {1,10} {2,17} {3,20} {4,35:f2}", rows+1, cols+1, seatList[rows, cols], nameList[rows, cols], priceList[rows, cols]); return strOut; } /// <summary> /// Send an array containing all seats in the cinema /// </summary> /// <returns></returns> public string[] GetSeatInfoString() { int count = totRows * totCols; if (count <= 0) return null; string[] strSeatInfoStrings = new string[count]; for (int i = 0; i < totRows * totCols; i++) { strSeatInfoStrings[i] = GetSeatInfoAt(i); } return strSeatInfoStrings; } /// <summary> /// Reserve seat if seat is vacant /// </summary> /// <param name="name"></param> /// <param name="price"></param> /// <param name="index"></param> /// <returns></returns> public bool ReserveSeat(string name, double price, int index) { int cols = ReturnColumn(index); int rows = ReturnRow(index); if (string.IsNullOrEmpty(nameList[rows, cols])) { nameList[rows, cols] = name; priceList[rows, cols] = price; seatList[rows, cols] = "Reserved"; return true; } else return false; } public string[] ReturnVacantSeats() { int totVacantSeats = int.Parse(GetNumOfVacant().ToString()); string[] vacantSeats = new string[totVacantSeats]; for (int i = 0; i < vacantSeats.Length; i++) { if (GetSeatInfoAt(i) == "Vacant") { vacantSeats[i] = GetSeatInfoAt(i); } } return vacantSeats; } public string[] ReturnReservedSeats() { int totReservedSeats = int.Parse(GetNumOfReserved().ToString()); string[] reservedSeats = new string[totReservedSeats]; for (int i = 0; i < reservedSeats.Length; i++) { if (GetSeatInfoAt(i) == "Reserved") { reservedSeats[i] = GetSeatInfoAt(i); } } return reservedSeats; } /// <summary> /// Cancel seat if seat is reserved /// </summary> /// <param name="index"></param> /// <returns></returns> public bool CancelSeat(int index) { int cols = ReturnColumn(index); int rows = ReturnRow(index); if (!string.IsNullOrEmpty(nameList[rows, cols])) { nameList[rows, cols] = ""; priceList[rows, cols] = 0.0; seatList[rows, cols] = "Vacant"; return true; } else { return false; } } /// <summary> /// Convert index to row and return value /// </summary> /// <param name="index"></param> /// <returns></returns> public int ReturnRow(int index) { int vectorRow = index; int row; row = (int)Math.Ceiling((double)(vectorRow / totCols)); return row; } /// <summary> /// Convert index to column and return value /// </summary> /// <param name="index"></param> /// <returns></returns> public int ReturnColumn(int index) { int row = index; int col = row % totCols; return col; } } } In MainForm, this is where I get ArgumentNullException: lbSeats.Items.AddRange(seatMngr.ReturnVacantSeats()); And this is the method where the array is to be returned containing all vacant seats: public string[] ReturnVacantSeats() { int totVacantSeats = int.Parse(GetNumOfVacant().ToString()); string[] vacantSeats = new string[totVacantSeats]; for (int i = 0; i < vacantSeats.Length; i++) { if (GetSeatInfoAt(i) == "Vacant") { vacantSeats[i] = GetSeatInfoAt(i); } } return vacantSeats; }

  Read the article

• SQLAuthority News – Technology and Online Learning – Personal Technology Tip

  - by pinaldave

  This is the fourth post in my series about Personal Technology Tips and Tricks, and I knew exactly what I wanted to write about.  But at first I was conflicted.   Is online learning really a personal tip?  Is it really a trick that no one knows?  However, I have decided to stick with my original idea because online learning is everywhere.  It’s a trick that we can’t – and shouldn’t – overlook.  Here are ten of my ideas about how we should be taking advantage of online learning. 1) Get ahead in the work place.  We all know that a good way to become better at your job, and to become more competitive for promotions and raises.  Many people overlook online learning as a way to get job training, though, thinking it is a path for people still seeking their high school or college diplomas.  But take a look at what companies like Pluralsight offer, and you might be pleasantly surprised. 2) Flexibility.  Some of us remember the heady days of college with nostalgia, others remember it with loathing.  A lot of bad memories come from remembering the strict scheduling and deadlines of college.  But with online learning, the classes fit into your free time – you don’t have to schedule your life around classes.  Even better, there are usually no homework or test deadlines, only one final deadline where all work must be completed.  This allows students to work at their own pace – my next point. 3) Learn at your own pace.  One thing traditional classes suffer from is that they are highly structured.  If you work more quickly than the rest of the class, or especially if you work more slowly, traditional classes do not work for you.  Online courses let you move as quickly or as slowly as you find necessary. 4) Fill gaps in your knowledge.  I’m sure I am not the only one who has thought to myself “I would love to take a course on X, Y, or Z.”  The problem is that it can be very hard to find the perfect class that teaches exactly what you’re interested in, at a time and a price that’s right.  But online courses are far easier to tailor exactly to your tastes. 5) Fits into your schedule.  Even harder to find than a class you’re interested in is one that fits into your schedule.  If you hold down a job – even a part time job – you know it’s next to impossible to find class times that work for you.  Online classes can be taken anytime, anywhere.  On your lunch break, in your car, or in your pajamas at the end of the day. 6) Student centered.  Online learning has to stay competitive.  There are hundreds, even thousands of options for students, and every provider has to find a way to lure in students and provide them with a good education.  The best kind of online classes know that they need to provide great classes, flexible scheduling, and high quality to attract students – and the student benefit from this kind of attention. 7) You can save money.  The average cost for a college diploma in the US is over $20,000.  I don’t know about you, but that is not the kind of money I just have lying around for a rainy day.  Sometimes I think I’d love to go back to school, but not for that price tag.  Online courses are much, much more affordable.  And even better, you can pick and choose what courses you’d like to take, and avoid all the “electives” in college. 8) Get access to the best minds in the business.  One of the perks of being the best in your field is that you are one person who knows the most about something.  If students are lucky, you will choose to share that knowledge with them on a college campus.  For the hundreds of other students who don’t live in your area and don’t attend your school, they are out of luck.  But luckily for them, more and more online courses is attracting the best minds in the business, and if you enroll online, you can take advantage of these minds, too. 9) Save your time.  Getting a four year degree is a great decision, and I encourage everyone to pursue their Bachelor’s – and beyond.  But if you have already tried to go to school, or already have a degree but are thinking of switching fields, four years of your life is a long time to go back and redo things.  Getting your online degree will save you time by allowing you to work at your own pace, set your own schedule, and take only the classes you’re interested in. 10) Variety of degrees and programs.  If you’re not sure what you’re interested in, or if you only need a few classes here and there to finish a program, online classes are perfect for you.  You can pick and choose what you’d like, and sample a wide variety without spending too much money. I hope I’ve outlined for everyone just a few ways that they could benefit from online learning.  If you’re still unconvinced, just check out a few of my other articles that expand more on these topics. Here are the blog posts relevent to developer trainings: Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Developer Training, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Developer Training

  Read the article

• Oracle bleibt auch 2011 Spitzenreiter im Bereich Datenbanken

  - by Anne Manke

  Mit der Veröffentlichung der aktuellen Ausgabe "Market Share: All Software Markets, Worldwide 2011" bestätigt das weltweit führende Marktanalyseunternehmen Gartner Oracle's Marktführerschaft im Bereich der Relationellen Datenbank Management Systeme (RDBMS). Oracle konnte innerhalb des letzten Jahres seinen Abstand zu seinen Marktbegleitern im Bereich der RDBMS mit einem stabilen Wachstum von 18% sogar ausbauen: der Marktanteil stieg im Jahr 2010 von 48,2% auf 48,8% im Jahr 2011. Damit ist der Abstand zu Oracle's stärkstem Verfolger IBM auf 28,6%.   Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableLightListAccent2 {mso-style-name:"Light List - Accent 2"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:61; mso-style-unhide:no; border:solid #C0504D 1.0pt; mso-border-themecolor:accent2; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableLightListAccent2FirstRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:first-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-shading:#C0504D; mso-tstyle-shading-themecolor:accent2; mso-para-margin-top:0cm; mso-para-margin-bottom:0cm; mso-para-margin-bottom:.0001pt; line-height:normal; color:white; mso-themecolor:background1; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2LastRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:last-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:2.25pt double #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2; mso-para-margin-top:0cm; mso-para-margin-bottom:0cm; mso-para-margin-bottom:.0001pt; line-height:normal; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2FirstCol {mso-style-name:"Light List - Accent 2"; mso-table-condition:first-column; mso-style-priority:61; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2LastCol {mso-style-name:"Light List - Accent 2"; mso-table-condition:last-column; mso-style-priority:61; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2OddColumn {mso-style-name:"Light List - Accent 2"; mso-table-condition:odd-column; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2;} table.MsoTableLightListAccent2OddRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:odd-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2;} Revenue 2010 ($USM) Revenue 2011 ($USM) Growth 2010 Growth 2011 Share 2010 Share 2011 Oracle 9,990.5 11,787.0 10.9% 18.0% 48.2% 48.8% IBM 4,300.4 4,870.4 5.4% 13.3% 20.7% 20.2% Microsoft 3,641.2 4,098.9 10.1% 12.6% 17.6% 17.0% SAP/Sybase 744.4 1,101.1 12.8% 47.9% 3.6% 4.6% Teradata 754.7 882.3 16.9% 16.9% 3.6% 3.7% Source: Gartner’s “Market Share: All Software Markets, Worldwide 2011,” March 29, 2012, By Colleen Graham, Joanne Correia, David Coyle, Fabrizio Biscotti, Matthew Cheung, Ruggero Contu, Yanna Dharmasthira, Tom Eid, Chad Eschinger, Bianca Granetto, Hai Hong Swinehart, Sharon Mertz, Chris Pang, Asheesh Raina, Dan Sommer, Bhavish Sood, Marianne D'Aquila, Laurie Wurster and Jie Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableLightListAccent2 {mso-style-name:"Light List - Accent 2"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:61; mso-style-unhide:no; border:solid #C0504D 1.0pt; mso-border-themecolor:accent2; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableLightListAccent2FirstRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:first-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-shading:#C0504D; mso-tstyle-shading-themecolor:accent2; mso-para-margin-top:0cm; mso-para-margin-bottom:0cm; mso-para-margin-bottom:.0001pt; line-height:normal; color:white; mso-themecolor:background1; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2LastRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:last-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:2.25pt double #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2; mso-para-margin-top:0cm; mso-para-margin-bottom:0cm; mso-para-margin-bottom:.0001pt; line-height:normal; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2FirstCol {mso-style-name:"Light List - Accent 2"; mso-table-condition:first-column; mso-style-priority:61; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2LastCol {mso-style-name:"Light List - Accent 2"; mso-table-condition:last-column; mso-style-priority:61; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2OddColumn {mso-style-name:"Light List - Accent 2"; mso-table-condition:odd-column; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2;} table.MsoTableLightListAccent2OddRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:odd-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2;} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:12.0pt; mso-para-margin-left:0cm; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableLightListAccent2 {mso-style-name:"Light List - Accent 2"; mso-tstyle-rowband-size:1; mso-tstyle-colband-size:1; mso-style-priority:61; mso-style-unhide:no; border:solid #C0504D 1.0pt; mso-border-themecolor:accent2; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableLightListAccent2FirstRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:first-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-shading:#C0504D; mso-tstyle-shading-themecolor:accent2; mso-para-margin-top:0cm; mso-para-margin-bottom:0cm; mso-para-margin-bottom:.0001pt; line-height:normal; color:white; mso-themecolor:background1; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2LastRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:last-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:2.25pt double #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2; mso-para-margin-top:0cm; mso-para-margin-bottom:0cm; mso-para-margin-bottom:.0001pt; line-height:normal; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2FirstCol {mso-style-name:"Light List - Accent 2"; mso-table-condition:first-column; mso-style-priority:61; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2LastCol {mso-style-name:"Light List - Accent 2"; mso-table-condition:last-column; mso-style-priority:61; mso-style-unhide:no; mso-ansi-font-weight:bold; mso-bidi-font-weight:bold;} table.MsoTableLightListAccent2OddColumn {mso-style-name:"Light List - Accent 2"; mso-table-condition:odd-column; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2;} table.MsoTableLightListAccent2OddRow {mso-style-name:"Light List - Accent 2"; mso-table-condition:odd-row; mso-style-priority:61; mso-style-unhide:no; mso-tstyle-border-top:1.0pt solid #C0504D; mso-tstyle-border-top-themecolor:accent2; mso-tstyle-border-left:1.0pt solid #C0504D; mso-tstyle-border-left-themecolor:accent2; mso-tstyle-border-bottom:1.0pt solid #C0504D; mso-tstyle-border-bottom-themecolor:accent2; mso-tstyle-border-right:1.0pt solid #C0504D; mso-tstyle-border-right-themecolor:accent2;}

  Read the article

• How can an SQL relational database be used to model a thesaurus? [closed]

  - by Miles O'Keefe

  I would like to design a web app that functions as a simple thesaurus: a long list of words with attributes, all of which are linked to each other. This thesaurus data model can be defined as: a controlled vocabulary arranged in a known order in which equivalence, hierarchical, and associative relationships among terms are clearly displayed and identified by standardized relationship indicators. My idea so far is to have one database in which every word is a table, and every table contains all words related to that word. e.g. Thesaurus(database) - happy(table) - excited(row)|cheerful(row)|lively(row) Is there are more efficient way to store words and their relationship to other words in a relational SQL database?

  Read the article

• Android Bitmap : collision Detecting [on hold]

  - by user2505374

  I am writing an Android game right now and I would need some help in the collision of the wall on screen. When I drag the ball in the top and right it able to collide in wall but when I drag it faster it was able to overlap in the wall. public boolean onTouchEvent(MotionEvent event) { int x = (int) event.getX(); int y = (int) event.getY(); switch (event.getAction()) { // if the player moves case MotionEvent.ACTION_MOVE: { if (playerTouchRect.contains(x, y)) { boolean left = false; boolean right = false; boolean up = false; boolean down = false; boolean canMove = false; boolean foundFinish = false; if (x != pLastXPos) { if (x < pLastXPos) { left = true; } else { right = true; } pLastXPos = x; } if (y != pLastYPos) { if (y < pLastYPos) { up = true; } else { down = true; } pLastYPos = y; } plCellRect = getRectFromPos(x, y); newplRect.set(playerRect); newplRect.left = x - (int) (playerRect.width() / 2); newplRect.right = x + (int) (playerRect.width() / 2); newplRect.top = y - (int) (playerRect.height() / 2); newplRect.bottom = y + (int) (playerRect.height() / 2); int currentRow = 0; int currentCol = 0; currentRow = getRowFromYPos(newplRect.top); currentCol = getColFromXPos(newplRect.right); if(!canMove){ canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] == Cell.wall; canMove =true; } finishTest = mapManager.getCurrentTile().pMaze[currentRow][currentCol]; foundA = finishTest == Cell.valueOf(letterNotGet + ""); canMove = mapManager.getCurrentTile().pMaze[currentRow][currentCol] != Cell.wall; canMove = (finishTest == Cell.floor || finishTest == Cell.pl) && canMove; if (canMove) { invalidate(); setTitle(); } if (foundA) { mapManager.getCurrentTile().pMaze[currentRow][currentCol] = Cell.floor; // finishTest letterGotten.add(letterNotGet); playCurrentLetter(); /*sounds.play(sExplosion, 1.0f, 1.0f, 0, 0, 1.5f);*/ foundS = letterNotGet == 's'; letterNotGet++; }if(foundS){ AlertDialog.Builder builder = new AlertDialog.Builder(mainActivity); builder.setTitle(mainActivity.getText(R.string.finished_title)); LayoutInflater inflater = mainActivity.getLayoutInflater(); View view = inflater.inflate(R.layout.finish, null); builder.setView(view); View closeButton =view.findViewById(R.id.closeGame); closeButton.setOnClickListener(new OnClickListener() { @Override public void onClick(View clicked) { if(clicked.getId() == R.id.closeGame) { mainActivity.finish(); } } }); AlertDialog finishDialog = builder.create(); finishDialog.show(); } else { Log.d(TAG, "INFO: updated player position"); playerRect.set(newplRect); setTouchZone(); updatePlayerCell(); } } // end of (CASE) if playerTouch break; } // end of (SWITCH) Case motion }//end of Switch return true; }//end of TouchEvent private void finish() { // TODO Auto-generated method stub } public int getColFromXPos(int xPos) { val = xPos / (pvWidth / mapManager.getCurrentTile().pCols); if (val == mapManager.getCurrentTile().pCols) { val = mapManager.getCurrentTile().pCols - 1; } return val; } /** * Given a y pixel position, return the row of the cell it is in This is * used when determining the type of adjacent Cells. * * @param yPos * y position in pixels * @return The cell this position is in */ public int getRowFromYPos(int yPos) { val = yPos / (pvHeight / mapManager.getCurrentTile().pRows); if (val == mapManager.getCurrentTile().pRows) { val = mapManager.getCurrentTile().pRows - 1; } return val; } /** * When preserving the position we need to know which cell the player is in, * so calculate it from the centre on its Rect */ public void updatePlayerCell() { plCell.x = (playerRect.left + (playerRect.width() / 2)) / (pvWidth / mapManager.getCurrentTile().pCols); plCell.y = (playerRect.top + (playerRect.height() / 2)) / (pvHeight / mapManager.getCurrentTile().pRows); if (mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] == Cell.floor) { for (int row = 0; row < mapManager.getCurrentTile().pRows; row++) { for (int col = 0; col < mapManager.getCurrentTile().pCols; col++) { if (mapManager.getCurrentTile().pMaze[row][col] == Cell.pl) { mapManager.getCurrentTile().pMaze[row][col] = Cell.floor; break; } } } mapManager.getCurrentTile().pMaze[plCell.y][plCell.x] = Cell.pl; } } public Rect getRectFromPos(int x, int y) { calcCell.left = ((x / cellWidth) + 0) * cellWidth; calcCell.right = calcCell.left + cellWidth; calcCell.top = ((y / cellHeight) + 0) * cellHeight; calcCell.bottom = calcCell.top + cellHeight; Log.d(TAG, "Rect: " + calcCell + " Player: " + playerRect); return calcCell; } public void setPlayerRect(Rect newplRect) { playerRect.set(newplRect); } private void setTouchZone() { playerTouchRect.set( playerRect.left - playerRect.width() / TOUCH_ZONE, playerRect.top - playerRect.height() / TOUCH_ZONE, playerRect.right + playerRect.width() / TOUCH_ZONE, playerRect.bottom + playerRect.height() / TOUCH_ZONE); } public Rect getPlayerRect() { return playerRect; } public Point getPlayerCell() { return plCell; } public void setPlayerCell(Point cell) { plCell = cell; }

  Read the article

• Why is this 8 puzzle unsolvable?

  - by Ashwin

  I am developing a 8 puzzle game. I went through the rules in this (see Detecting Unsolvable Puzzles) link, which tell you how to detect if an initial state is unsolvable. It says that if the number of inversions is odd, then the goal state cannot be reached and if even the goal state can be reached. Inversion is defined as Given a board, an inversion is any pair of blocks i and j where i < j but i appears after j when considering the board in row-major order (row 0, followed by row 1, and so forth). There is a 8-puzzle solver(applet) here. Choose 8-puzzle from the options. 1,0,3,2,4,5,6,7,8 and 7,0,2,8,5,3,6,4,1 As you can see both of them contain an even number of inversions. Still the program says that the puzzle is unsolvable. So is the Princeton link wrong?

  Read the article

• How can I support scrolling when using batched rendering for my tiles?

  - by dardanel

  I have tiled map 100*75 and tiles are 32*32 pixel.I want to use batching for performance .I don't figure it out , because of my game needs scrolling and every frame i draw 22*16 tiles (my screen is 20*16 tile) .I thought that batching tiles for every frame .Is it good or any suggestion? edit :to more clarify I want to use occlusion culling and batching at the same time.I thought that drawing only visible areas and batching them together .But there is a something i couldn't figure out .When scrolling screen with translate matrix , if one row become invisible , I bind new row and batch them again.Every batched objects needs to buffer again.So I batch tiles and buffer to VBO every time when one row become invisible .I don't know these way is efficient or not .This is my question .And i am open to any suggestions.

  Read the article

• DataTable to Generic List Conversion

  using System;using System.Collections.Generic;using System.Linq;using System.Data;namespace ConsoleApplication1{ class Program { static void Main(string[] args) { DataTable table = new DataTable { Columns = { {"Number", typeof(int)}, {"Name", typeof(string)} } }; //Just adding few test rows to datatable. for (int i = 1; i <= 5; i++) { table.Rows.Add(i, "Name" + i); } var returnList = from row in table.AsEnumerable() select new MyObject { Number = row.Field<int>("Number"), Name = row.Field<String>("Name") }; //Displaying converted collection foreach (MyObject item in returnList) { Console.WriteLine("{0}\t{1}", item.Number, item.Name); } } } class MyObject { public int Number { get; set; } public String Name { get; set; } }} span.fullpost {display:none;}

  Read the article

• ASP.NET Pivot Grid Control Supports New Layout - v2010 vol 1

  The ASPxPivotGrid will now support a slick new feature that will help save you screen space: Compact Layout for Hierarchical Row Values With DXperience v2010 vol 1, you can create compact layouts for hierarchical pivot table row values (this capability is also available in the WinForms and WPF versions of this control). The compact layout allows you get more space horizontally without sacrificing the distinction between the hierarchical row values: DXperience? What's That? DXperience is the...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Gridview - Conditional Images

  This Gridview sample shows how to, for each row, based on other data within that row, to show a different image. We do this by creating a TemplateField, and putting an ASP.Net Image control within it, called 'Image1'. Then, inside the RowDataBound event of the Gridview, we put code, which first, checks and finds the Image control in that row, and then assigning a different JPG file to the ImageURL property of that image. One other thing here, you'll notice, is that when the criteria is matched, we set the Image control's Visible property to 'True'. That's because, one extra criteria is, that if the Units In Stock is larger than 80, we set the Image control's Visible property to 'False'. Naturally, since we're checking one particular column in the Gridview for this data, we're using a Select Case statement.

  Read the article

• Css clicking problem [migrated]

  - by Shyghar

  I'm building a strange div shaped structure and I need a hint to resolve a clicking problem. This is a jsfiddle to show you the issue. The structure for each element is: <div class="views-row"> <div class="diamonds-container"> CONTENT </div> </div> I have a onclick() event on .diamonds-container but the .views-row div of the next element [with red or blue background..] go over the container and stop the click event on it. I tryed to play with the z-index but I didn't have the expected result. How can I achieve this structure with a correct click event on diamonds-containers ? I think I can track the .views-row click with javascript and trigger manually a click on the previous diamonds-container but this will be my final option. How can I achieve this without javascript?

  Read the article

• Synchronize Data between a Silverlight ListBox and a User Control

  - by psheriff

  One of the great things about XAML is the powerful data-binding capabilities. If you load up a list box with a collection of objects, you can display detail data about each object without writing any C# or VB.NET code. Take a look at Figure 1 that shows a collection of Product objects in a list box. When you click on a list box you bind the current Product object selected in the list box to a set of controls in a user control with just a very simple Binding statement in XAML.  Figure 1: Synchronizing a ListBox to a User Control is easy with Data Binding Product and Products Classes To illustrate this data binding feature I am going to just create some local data instead of using a WCF service. The code below shows a Product class that has three properties, namely, ProductId, ProductName and Price. This class also has a constructor that takes 3 parameters and allows us to set the 3 properties in an instance of our Product class. C#public class Product{  public Product(int productId, string productName, decimal price)  {    ProductId = productId;    ProductName = productName;    Price = price;  }   public int ProductId { get; set; }  public string ProductName { get; set; }  public decimal Price { get; set; }} VBPublic Class Product  Public Sub New(ByVal _productId As Integer, _                 ByVal _productName As String, _                 ByVal _price As Decimal)    ProductId = _productId    ProductName = _productName    Price = _price  End Sub   Private mProductId As Integer  Private mProductName As String  Private mPrice As Decimal   Public Property ProductId() As Integer    Get      Return mProductId    End Get    Set(ByVal value As Integer)      mProductId = value    End Set  End Property   Public Property ProductName() As String    Get      Return mProductName    End Get    Set(ByVal value As String)      mProductName = value    End Set  End Property   Public Property Price() As Decimal    Get      Return mPrice    End Get    Set(ByVal value As Decimal)      mPrice = value    End Set  End PropertyEnd Class To fill up a list box you need a collection class of Product objects. The code below creates a generic collection class of Product objects. In the constructor of the Products class I have hard-coded five product objects and added them to the collection. In a real-world application you would get your data through a call to service to fill the list box, but for simplicity and just to illustrate the data binding, I am going to just hard code the data. C#public class Products : List<Product>{  public Products()  {    this.Add(new Product(1, "Microsoft VS.NET 2008", 1000));    this.Add(new Product(2, "Microsoft VS.NET 2010", 1000));    this.Add(new Product(3, "Microsoft Silverlight 4", 1000));    this.Add(new Product(4, "Fundamentals of N-Tier eBook", 20));    this.Add(new Product(5, "ASP.NET Security eBook", 20));  }} VBPublic Class Products  Inherits List(Of Product)   Public Sub New()    Me.Add(New Product(1, "Microsoft VS.NET 2008", 1000))    Me.Add(New Product(2, "Microsoft VS.NET 2010", 1000))    Me.Add(New Product(3, "Microsoft Silverlight 4", 1000))    Me.Add(New Product(4, "Fundamentals of N-Tier eBook", 20))    Me.Add(New Product(5, "ASP.NET Security eBook", 20))  End SubEnd Class The Product Detail User Control Below is a user control (named ucProduct) that is used to display the product detail information seen in the bottom portion of Figure 1. This is very basic XAML that just creates a text block and a text box control for each of the three properties in the Product class. Notice the {Binding Path=[PropertyName]} on each of the text box controls. This means that if the DataContext property of this user control is set to an instance of a Product class, then the data in the properties of that Product object will be displayed in each of the text boxes. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.ucProduct"  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"  HorizontalAlignment="Left"  VerticalAlignment="Top">  <Grid Margin="4">    <Grid.RowDefinitions>      <RowDefinition Height="Auto" />      <RowDefinition Height="Auto" />      <RowDefinition Height="Auto" />    </Grid.RowDefinitions>    <Grid.ColumnDefinitions>      <ColumnDefinition MinWidth="120" />      <ColumnDefinition />    </Grid.ColumnDefinitions>    <TextBlock Grid.Row="0"               Grid.Column="0"               Text="Product Id" />    <TextBox Grid.Row="0"             Grid.Column="1"             Text="{Binding Path=ProductId}" />    <TextBlock Grid.Row="1"               Grid.Column="0"               Text="Product Name" />    <TextBox Grid.Row="1"             Grid.Column="1"             Text="{Binding Path=ProductName}" />    <TextBlock Grid.Row="2"               Grid.Column="0"               Text="Price" />    <TextBox Grid.Row="2"             Grid.Column="1"             Text="{Binding Path=Price}" />  </Grid></UserControl> Synchronize ListBox with User Control You are now ready to fill the list box with the collection class of Product objects and then bind the SelectedItem of the list box to the Product detail user control. The XAML below is the complete code for Figure 1. <UserControl x:Class="SL_SyncListBoxAndUserControl_CS.MainPage"  xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"  xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"  xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS"  VerticalAlignment="Top"  HorizontalAlignment="Left">  <UserControl.Resources>    <src:Products x:Key="productCollection" />  </UserControl.Resources>  <Grid x:Name="LayoutRoot"        Margin="4"        Background="White">    <Grid.RowDefinitions>      <RowDefinition Height="Auto" />      <RowDefinition Height="*" />    </Grid.RowDefinitions>    <ListBox x:Name="lstData"             Grid.Row="0"             BorderBrush="Black"             BorderThickness="1"             ItemsSource="{Binding                   Source={StaticResource productCollection}}"             DisplayMemberPath="ProductName" />    <src:ucProduct x:Name="prodDetail"                   Grid.Row="1"                   DataContext="{Binding ElementName=lstData,                                          Path=SelectedItem}" />  </Grid></UserControl> The first step to making this happen is to reference the Silverlight project (SL_SyncListBoxAndUserControl_CS) where the Product and Products classes are located. I added this namespace and assigned it a namespace prefix of “src” as shown in the line below: xmlns:src="clr-namespace:SL_SyncListBoxAndUserControl_CS" Next, to use the data from an instance of the Products collection, you create a UserControl.Resources section in the XAML and add a tag that creates an instance of the Products class and assigns it a key of “productCollection”.   <UserControl.Resources>    <src:Products x:Key="productCollection" />  </UserControl.Resources> Next, you bind the list box to this productCollection object using the ItemsSource property. You bind the ItemsSource of the list box to the static resource named productCollection. You can then set the DisplayMemberPath attribute of the list box to any property of the Product class that you want. In the XAML below I used the ProductName property. <ListBox x:Name="lstData"         ItemsSource="{Binding             Source={StaticResource productCollection}}"         DisplayMemberPath="ProductName" /> You now need to create an instance of the ucProduct user contol below the list box. You do this by once again referencing the “src” namespace and typing in the name of the user control. You then set the DataContext property on this user control to a binding. The binding uses the ElementName attribute to bind to the list box name, in this case “lstData”. The Path of the data is SelectedItem. These two attributes together tell Silverlight to bind the DataContext to the selected item of the list box. That selected item is a Product object. So, once this is bound, the bindings on each text box in the user control are updated and display the current product information. <src:ucProduct x:Name="prodDetail"               DataContext="{Binding ElementName=lstData,                                      Path=SelectedItem}" /> Summary Once you understand the basics of data binding in XAML, you eliminate a lot code that is otherwise needed to move data into controls and out of controls back into an object. Connecting two controls together is easy by just binding using the ElementName and Path properties of the Binding markup extension. Another good tip out of this blog is use user controls and set the DataContext of the user control to have all of the data on the user control update through the bindings. NOTE: You can download the complete sample code (in both VB and C#) at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "SL – Synchronize List Box Data with User Control" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

  Read the article

• Guessing Excel Data Types

  - by AjarnMark

  Note to Self HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Jet\4.0\Engines\Excel: TypeGuessRows = 0 means scan everything. Note to Others About 10 years ago I stumbled across this bit of information just when I needed it and it saved my project.  Then for some reason, a few years later when it would have been nice, but not critical, for some reason I could not find it again anywhere.  Well, now I have stumbled across it again, and to preserve my future self from nightmares and sudden baldness due to pulling my hair out, I have decided to blog it in the hopes that I can find it again this way. Here’s the story…  When you query data from an Excel spreadsheet, such as with old-fashioned DTS packages in SQL 2000 (my first reference) or simply with an OLEDB Data Adapter from ASP.NET (recent task) and if you are using the Microsoft Jet 4.0 driver (newer ones may deal with this differently) then you can get funny results where the query reports back that a cell value is null even when you know it contains data. What happens is that Excel doesn’t really have data types.  While you can format information in cells to appear like certain data types (e.g. Date, Time, Decimal, Text, etc.) that is not really defining the cell as being of a certain type like we think of when working with databases.  But, presumably, to make things more convenient for the user (programmer) when you issue a query against Excel, the query processor tries to guess what type of data is contained in each column and returns it in an appropriate manner.  This is all well and good IF your data is consistent in every row and matches what the processor guessed.  And, for efficiency’s sake, when the query processor is trying to figure out each column’s data type, it does so by analyzing only the first 8 rows of data (default setting). Now here’s the problem, suppose that your spreadsheet contains information about clothing, and one of the columns is Size.  Now suppose that in the first 8 rows, all of your sizes look like 32, 34, 18, 10, and so on, using numbers, but then, somewhere after the 8th row, you have some rows with sizes like S, M, L, XL.  What happens is that by examining only the first 8 rows, the query processor inferred that the column contained numerical data, and then when it hits the non-numerical data in later rows, it comes back blank.  Major bummer, and a real pain to track down if you don’t know that Excel is doing this, because you study the spreadsheet and say, “the data is RIGHT THERE!  WHY doesn’t the query see it?!?!”  And the hair-pulling begins. So, what’s a developer to do?  One option is to go to the registry setting noted above and change the DWORD value of TypeGuessRows from the default of 8 to 0 (zero).  Setting this value to zero will force Jet to scan every row in the spreadsheet before making its determination as to what type of data the column contains.  And that means that in the example above, it would have treated the column as a string rather than as numeric, and presto! your query now returns all of the values that you know are in there. Of course, there is a caveat… if you are querying large spreadsheets, making Jet scan every row can be quite a performance hit.  You could enter a different number (more than 8) that you believe is a better sampling of rows to make the guess, but you still have the possibility that every row scanned looks alike, but that later rows are different, and that you might get blanks when there really is data there.  That’s the type of gamble, I really don’t like to take with my data. Anyone with a better approach, or with experience with more recent drivers that have a better way of handling data types, please chime in!

  Read the article

• Datapager in silverlight 4 -Nested datagrid visibility issue

  - by Archie

  I have a datagrid in silverlight with child datagrid nested in it. Also I have a DataPager on the outer datagrid. The code looks like this: <data:DataGrid x:Name="dgData" Width="600" ItemsSource="{Binding}" AutoGenerateColumns="False" IsReadOnly="True" HorizontalScrollBarVisibility="Hidden" CanUserSortColumns="False" RowDetailsVisibilityChanged="dgData_RowDetailsVisibilityChanged" Margin="20,0" Grid.RowSpan="2"> <data:DataGrid.Columns> <data:DataGridTextColumn Header="Item" Width="*" Binding="{Binding ItemName,Mode=TwoWay}"/> <data:DataGridTextColumn Header="Company" Width="*" Binding="{Binding Company,Mode=TwoWay}"/> </data:DataGrid.Columns> <data:DataGrid.RowDetailsTemplate> <DataTemplate> <data:DataGrid x:Name="dgRowDetail" Width="400" HorizontalScrollBarVisibility="Hidden" AutoGenerateColumns="False" Visibility="Collapsed"> <data:DataGrid.Columns> <data:DataGridTextColumn Header="Date" Width="*" Binding="{Binding Date,Mode=TwoWay}"/> <data:DataGridTextColumn Header="Price" Width="*" Binding="{Binding Price,Mode=TwoWay}"/> </data:DataGrid.Columns> </data:DataGrid> </DataTemplate> </data:DataGrid.RowDetailsTemplate> </data:DataGrid> <data:DataPager x:Name="dpData" HorizontalAlignment="Center" DisplayMode="FirstLastPreviousNextNumeric" Source="{Binding}"/> I have one PagedCollectionView pgv which is bound to outer datagrid as: DataContext = pgv; When the row is clicked I set the child datagrid's ItemsSource property to another PagedCollectionView. My problem is it works fine except for the first row for the first time. When I click on it, it doesn't fire the dgData_RowDetailsVisibilityChanged event. Also, when I click on second row, firstly first row fires the event and then the second row fires it and shows the nested grid. Please help.

  Read the article

• What is the best way to slide a panel in WPF?

  - by Kris Erickson

  I have a fairly simple UserControl that I have made (pardon my Xaml I am just learning WPF) and I want to slide the off the screen. To do so I am animating a translate transform (I also tried making the Panel the child of a canvas and animating the X position with the same results), but the panel moves very jerkily, even on a fairly fast new computer. What is the best way to slide in and out (preferably with KeySplines so that it moves with inertia) without getting the jerkyness. I only have 8 buttons on the panel, so I didn't think it would be too much of a problem. Here is the Xaml I am using, it runs fine in Kaxaml, but it is very jerky and slow (as well as being jerkly and slow when run compiled in a WPF app). <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Width="1002" Height="578"> <UserControl.Resources> <Style TargetType="Button"> <Setter Property="Control.Padding" Value="4"/> <Setter Property="Control.Margin" Value="10"/> <Setter Property="Control.Template"> <Setter.Value> <ControlTemplate TargetType="Button"> <Grid Name="backgroundGrid" Width="210" Height="210" Background="#00FFFFFF"> <Grid.BitmapEffect> <BitmapEffectGroup> <DropShadowBitmapEffect x:Name="buttonDropShadow" ShadowDepth="2"/> <OuterGlowBitmapEffect x:Name="buttonGlow" GlowColor="#A0FEDF00" GlowSize="0"/> </BitmapEffectGroup> </Grid.BitmapEffect> <Border x:Name="background" Margin="1,1,1,1" CornerRadius="15"> <Border.Background> <LinearGradientBrush StartPoint="0,0" EndPoint="0,1"> <LinearGradientBrush.GradientStops> <GradientStop Offset="0" Color="#FF0062B6"/> <GradientStop Offset="1" Color="#FF0089FE"/> </LinearGradientBrush.GradientStops> </LinearGradientBrush> </Border.Background> </Border> <Border Margin="1,1,1,0" BorderBrush="#FF000000" BorderThickness="1.5" CornerRadius="15"/> <ContentPresenter HorizontalAlignment="Center" Margin="{TemplateBinding Control.Padding}" VerticalAlignment="Center" Content="{TemplateBinding ContentControl.Content}" ContentTemplate="{TemplateBinding ContentControl.ContentTemplate}"/> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> </UserControl.Resources> <Canvas> <Grid x:Name="Panel1" Height="578" Canvas.Left="0" Canvas.Top="0"> <Grid.RenderTransform> <TransformGroup> <TranslateTransform x:Name="panelTranslate" X="0" Y="0"/> </TransformGroup> </Grid.RenderTransform> <Grid.RowDefinitions> <RowDefinition Height="287"/> <RowDefinition Height="287"/> </Grid.RowDefinitions> <Grid.ColumnDefinitions> <ColumnDefinition x:Name="Panel1Col1"/> <ColumnDefinition x:Name="Panel1Col2"/> <ColumnDefinition x:Name="Panel1Col3"/> <ColumnDefinition x:Name="Panel1Col4"/> <!-- Set width to 0 to hide a column--> </Grid.ColumnDefinitions> <Button x:Name="Panel1Product1" Grid.Column="0" Grid.Row="0" HorizontalAlignment="Center" VerticalAlignment="Center"> <Button.Triggers> <EventTrigger RoutedEvent="Button.Click" SourceName="Panel1Product1"> <EventTrigger.Actions> <BeginStoryboard> <Storyboard> <DoubleAnimation BeginTime="00:00:00.6" Duration="0:0:3" From="0" Storyboard.TargetName="panelTranslate" Storyboard.TargetProperty="X" To="-1000"/> </Storyboard> </BeginStoryboard> </EventTrigger.Actions> </EventTrigger> </Button.Triggers> </Button> <Button x:Name="Panel1Product2" Grid.Column="0" Grid.Row="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="Panel1Product3" Grid.Column="1" Grid.Row="0" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="Panel1Product4" Grid.Column="1" Grid.Row="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="Panel1Product5" Grid.Column="2" Grid.Row="0" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="Panel1Product6" Grid.Column="2" Grid.Row="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="Panel1Product7" Grid.Column="3" Grid.Row="0" HorizontalAlignment="Center" VerticalAlignment="Center"/> <Button x:Name="Panel1Product8" Grid.Column="3" Grid.Row="1" HorizontalAlignment="Center" VerticalAlignment="Center"/> </Grid> </Canvas> </UserControl>

  Read the article

• Windows Sharepoint Services - FullTextSqlQuery Document library Unable to find items created by SYST

  - by Ashok

  We have created an ASP.NET web app that upload files to WSS Doc Libary. The files get added under 'SYSTEM ACCOUNT' in the library. The FullTextSqlQuery class is used to search the document libary items. But it only searches files that has been uploaded by a windows user account like 'Administrator' and ignores the ones uploaded by 'SYSTEM ACCOUNT'. As a result the search results are empty even though we have the necessary data in the document library. What could be the reason for this? The code is given below: public static List GetListItemsFromFTSQuery(string searchText) { string docLibUrl = "http://localhost:6666/Articles%20Library/Forms/AllItems.aspx"; List items = new List(); DataTable retResults = new DataTable(); SPSecurity.RunWithElevatedPrivileges(delegate { using (SPSite site = new SPSite(docLibUrl)) { SPWeb CRsite = site.OpenWeb(); SPList ContRep = CRsite.GetListFromUrl(docLibUrl); FullTextSqlQuery fts = new FullTextSqlQuery(site); fts.QueryText = "SELECT Title,ContentType,Path FROM portal..scope() WHERE freetext('" + searchText + "') AND (CONTAINS(Path,'\"" + ContRep.RootFolder.ServerRelativeUrl + "\"'))"; fts.ResultTypes = ResultType.RelevantResults; fts.RowLimit = 300; if (SPSecurity.AuthenticationMode != System.Web.Configuration.AuthenticationMode.Windows) fts.AuthenticationType = QueryAuthenticationType.PluggableAuthenticatedQuery; else fts.AuthenticationType = QueryAuthenticationType.NtAuthenticatedQuery; ResultTableCollection rtc = fts.Execute(); if (rtc.Count > 0) { using ( ResultTable relevantResults = rtc[ResultType.RelevantResults]) retResults.Load(relevantResults, LoadOption.OverwriteChanges); foreach (DataRow row in retResults.Rows) { if (!row["Path"].ToString().EndsWith(".aspx")) //if (row["ContentType"].ToString() == "Item") { using ( SPSite lookupSite = new SPSite(row["Path"].ToString())) { using (SPWeb web = lookupSite.OpenWeb()) { SPFile file = web.GetFile(row["Path"].ToString()); items.Add(file.Item); } } } } } } //using ends here }); return items; }

  Read the article

• Cocoa equivalent of the Carbon method getPtrSize

  - by Michael Minerva

  I need to translate the a carbon method into cocoa into and I am having trouble finding any documentation about what the carbon method getPtrSize really does. From the code I am translating it seems that it returns the byte representation of an image but that doesn't really match up with the name. Could someone give me a good explanation of this method or link me to some documentation that describes it. The code I am translating is in a common lisp implementation called MCL that has a bridge to carbon (I am translating into CCL which is a common lisp implementation with a Cocoa bridge). Here is the MCL code (#_before a method call means that it is a carbon method): (defmethod COPY-CONTENT-INTO ((Source inflatable-icon) (Destination inflatable-icon)) ;; check for size compatibility to avoid disaster (unless (and (= (rows Source) (rows Destination)) (= (columns Source) (columns Destination)) (= (#_getPtrSize (image Source)) (#_getPtrSize (image Destination)))) (error "cannot copy content of source into destination inflatable icon: incompatible sizes")) ;; given that they are the same size only copy content (setf (is-upright Destination) (is-upright Source)) (setf (height Destination) (height Source)) (setf (dz Destination) (dz Source)) (setf (surfaces Destination) (surfaces Source)) (setf (distance Destination) (distance Source)) ;; arrays (noise-map Source) ;; accessor makes array if needed (noise-map Destination) ;; ;; accessor makes array if needed (dotimes (Row (rows Source)) (dotimes (Column (columns Source)) (setf (aref (noise-map Destination) Row Column) (aref (noise-map Source) Row Column)) (setf (aref (altitudes Destination) Row Column) (aref (altitudes Source) Row Column)))) (setf (connectors Destination) (mapcar #'copy-instance (connectors Source))) (setf (visible-alpha-threshold Destination) (visible-alpha-threshold Source)) ;; copy Image: slow byte copy (dotimes (I (#_getPtrSize (image Source))) (%put-byte (image Destination) (%get-byte (image Source) i) i)) ;; flat texture optimization: do not copy texture-id -> destination should get its own texture id from OpenGL (setf (is-flat Destination) (is-flat Source)) ;; do not compile flat textures: the display list overhead slows things down by about 2x (setf (auto-compile Destination) (not (is-flat Source))) ;; to make change visible we have to reset the compiled flag (setf (is-compiled Destination) nil))

  Read the article

• iPad issue with a modal view: modal view label null after view controller is created

  - by iPhone Guy

  This is a weird issue. I have created a view controller with a nib file for my modal view. On that view there is a label, number and text view. When I create the view from the source view, I tried to set the label, but it shows that the label is null (0x0). Kinda weird... Any suggestions? Now lets look at the code (I put all of the code here because that shows more than I can just explain): The modal view controller - in IB the label is connected to the UILabel object: @implementation ModalViewController @synthesize delegate; @synthesize goalLabel, goalText, goalNumber; // Done button clicked - (void)dismissView:(id)sender { // Call the delegate to dismiss the modal view if ([delegate respondsToSelector:@selector(didDismissModalView: newText:)]) { NSNumber *tmpNum = goalNumber; NSString *tmpString = [[NSString alloc] initWithString:[goalText text]]; [delegate didDismissModalView:tmpNum newText:tmpString]; [tmpNum release]; [tmpString release]; } } - (void)cancelView:(id)sender { // Call the delegate to dismiss the modal view if ([delegate respondsToSelector:@selector(didCancelModalView)]) [delegate didCancelModalView]; } -(void) setLabelText:(NSString *)text { [goalLabel setText:text]; } /* // The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if ((self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil])) { // Custom initialization } return self; } */ -(void) viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; // bring up the keyboard.... [goalText becomeFirstResponder]; } // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; // set the current goal number to -1 so we know none was set goalNumber = [NSNumber numberWithInt: -1]; // Override the right button to show a Done button // which is used to dismiss the modal view self.navigationItem.rightBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(dismissView:)] autorelease]; // and now for the cancel button self.navigationItem.leftBarButtonItem = [[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemCancel target:self action:@selector(cancelView:)] autorelease]; self.navigationItem.title = @"Add/Update Goals"; } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Overriden to allow any orientation. return YES; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [super dealloc]; } @end And here is where the view controller is created, variables set, and displayed: - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { // put a checkmark.... UITableViewCell *tmpCell = [tableView cellForRowAtIndexPath:indexPath]; [tmpCell setAccessoryType:UITableViewCellAccessoryCheckmark]; // this is where the popup is gonna popup! // ===> HEre We Go! // Create the modal view controller ModalViewController *mdvc = [[ModalViewController alloc] initWithNibName:@"ModalDetailView" bundle:nil]; // We are the delegate responsible for dismissing the modal view [mdvc setDelegate:self]; // Create a Navigation controller UINavigationController *navController = [[UINavigationController alloc] initWithRootViewController:mdvc]; // set the modal view type navController.modalPresentationStyle = UIModalPresentationFormSheet; // set the label for all of the goals.... if (indexPath.section == 0 && indexPath.row == 0) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Long Term Goal 1:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:1]]; } if (indexPath.section == 0 && indexPath.row == 1) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Long Term Goal 2:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:2]]; } if (indexPath.section == 0 && indexPath.row == 2) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Long Term Goal 3:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:3]]; } if (indexPath.section == 0 && indexPath.row == 3) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Long Term Goal 4:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:4]]; } if (indexPath.section == 1 && indexPath.row == 0) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Short Term Goal 1:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:5]]; } if (indexPath.section == 1 && indexPath.row == 1) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Short Term Goal 2:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:6]]; } if (indexPath.section == 1 && indexPath.row == 2) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Short Term Goal 3:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:7]]; } if (indexPath.section == 1 && indexPath.row == 3) { [mdvc setLabelText:[[[NSString alloc] initWithString:@"Short Term Goal 4:"] autorelease]]; [mdvc setGoalNumber:[NSNumber numberWithInt:8]]; } // show the navigation controller modally [self presentModalViewController:navController animated:YES]; // Clean up resources [navController release]; [mdvc release]; // ==> Ah... we are done... }

  Read the article

• Zend Framework, Zend_Form_Element how to set custom name?

  - by ikso

  Hello, I have form, where some fields are looks like rows, so I can add/delete them using JS. For example: Field with ID=1 (existing row) <input id="id[1]" type="text" name="id[1]" value="1" /> <input id="name[1]" type="text" name="name[1]" value="100" /> Field with ID=2 (existing row) <input id="name[2]" type="text" name="name[2]" value="200" /> <input id="name[2]" type="text" name="name[2]" value="200" /> new row created by default (to allow add one more row to existing rows) <input id="id[n0]" type="text" name="id[n0]" value="" /> <input id="name[n0]" type="text" name="name[n0]" value="" /> new row created by JS <input id="id[n1]" type="text" name="id[n1]" value="" /> <input id="name[n1]" type="text" name="name[n1]" value="" /> So than we will proceed form, we will know what rows to update and what to add (if index starts with "n" - new, if index is number - existent element). I tried subforms... but do I have to create subform for each field? If I use following code: $subForm = new Zend_Form_SubForm(); $subForm->addElement('Text', 'n0'); $this->addSubForm($subForm, 'pid'); $subForm = new Zend_Form_SubForm(); $subForm->addElement('Text', 'n0'); $this->addSubForm($subForm, 'name'); What is the best way for this? 1) Use subforms? 2) Extend Zend/Form/Decorator/ViewHelper.php to use names like name[nX]? 3) Other solutions? Thanks.

  Read the article

• Xceed DataGrid SelectedItem issue

  - by Patrick K

  In my project I have an Xceed data grid which is bound to a data source with many records and record details. I am attempting to create a context menu option that will allow the user to search for a specific detail in a specific column. While I have successfully completed the functionality there is a UI part that is giving me some trouble, in that when I select the row in C#, if that row is not in view the row is never focused on. Thus the user has to scroll up and down looking for the row with expanded details. I am able to set the SelectedRow and expand the details like so: this.grid.AutoFilterValues[userColumn].Clear(); this.grid.AutoFilterValues[userColumn].Add(userValue); if (this.creditLinesDataGridControl.Items.Count > 0) { this.grid.SelectedItem = this.grid.Items[0]; this.grid.ExpandDetails(this.grid.Items[0]); } else { MessageBox.Show("Value not found in column: " + userColumn); } this.grid.AutoFilterValues[userColumn].Clear(); where userColumn and userValue are set previously in the method. How can I make the grid focus on the row after I've set the SelectedItem and expanded the details? Thanks, Patrick

  Read the article

• Access to DataTemplate Control of WPF Toolkit DataGridCell at Runtime, How?

  - by LukePet

  I have a DataGrid defined with WPF Toolkit. The CellEditingTemplate of this DataGrid is associated at runtime with a custom function that build a FrameworkElementFactory element. Now I have to access to control that is inserted inside DataTemplate of CellEditingTempleta, but I do not know how to do. On web I found a useful ListView Helper... public static class ListViewHelper { public static FrameworkElement GetElementFromCellTemplate(ListView listView, Int32 column, Int32 row, String name) { if (row >= listView.Items.Count || row < 0) { throw new ArgumentOutOfRangeException("row"); } GridView gridView = listView.View as GridView; if (gridView == null) { return null; } if (column >= gridView.Columns.Count || column < 0) { throw new ArgumentOutOfRangeException("column"); } ListViewItem item = listView.ItemContainerGenerator.ContainerFromItem(listView.Items[row]) as ListViewItem; if (item != null) { GridViewRowPresenter rowPresenter = GetFrameworkElementByName<GridViewRowPresenter>(item); if (rowPresenter != null) { ContentPresenter templatedParent = VisualTreeHelper.GetChild(rowPresenter, column) as ContentPresenter; DataTemplate dataTemplate = gridView.Columns[column].CellTemplate; if (dataTemplate != null && templatedParent != null) { return dataTemplate.FindName(name, templatedParent) as FrameworkElement; } } } return null; } private static T GetFrameworkElementByName<T>(FrameworkElement referenceElement) where T : FrameworkElement { FrameworkElement child = null; for (Int32 i = 0; i < VisualTreeHelper.GetChildrenCount(referenceElement); i++) { child = VisualTreeHelper.GetChild(referenceElement, i) as FrameworkElement; System.Diagnostics.Debug.WriteLine(child); if (child != null && child.GetType() == typeof(T)) { break; } else if (child != null) { child = GetFrameworkElementByName<T>(child); if (child != null && child.GetType() == typeof(T)) { break; } } } return child as T; } } this code work with the ListView object but not with the DataGrid object. How can use something like this in DataGrid?

  Read the article

• Drupal views pane content not visible

  - by jwandborg

  I have a pane on my front page with one content pane and two views panes. I can't see the content of the third view ($pane->pid = "new-3" / comment: # Senaste bilder). Here's my panel <?php $page = new stdClass; $page->disabled = FALSE; /* Edit this to true to make a default page disabled initially */ $page->api_version = 1; $page->name = 'frontpage'; $page->task = 'page'; $page->admin_title = 'Startsida'; $page->admin_description = ''; $page->path = 'hem'; $page->access = array(); $page->menu = array(); $page->arguments = array(); $page->conf = array(); $page->default_handlers = array(); $handler = new stdClass; $handler->disabled = FALSE; /* Edit this to true to make a default handler disabled initially */ $handler->api_version = 1; $handler->name = 'page_frontpage_panel_context'; $handler->task = 'page'; $handler->subtask = 'frontpage'; $handler->handler = 'panel_context'; $handler->weight = 0; $handler->conf = array( 'title' => 'Panel', 'no_blocks' => FALSE, 'css_id' => '', 'css' => '', 'contexts' => array(), 'relationships' => array(), ); $display = new panels_display; $display->layout = 'onecol'; $display->layout_settings = array(); $display->panel_settings = array(); $display->cache = array(); $display->title = ''; $display->content = array(); $display->panels = array(); # Bild $pane = new stdClass; $pane->pid = 'new-1'; $pane->panel = 'middle'; $pane->type = 'custom'; $pane->subtype = 'custom'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'admin_title' => '', 'title' => '', 'body' => '<img src="/sites/all/themes/zen/ils-2010/img/graphics-start-text-v3.png" alt="Hej! Vi vet att du och dina klasskompisar har mycket att tänka på under er sista termin i gymnasiet. Därför har vi samlat några saker som vi tror kommer göra er studenttid lite roligare och lite enklare. Välkommen!" />', 'format' => '2', 'substitute' => TRUE, ); $pane->cache = array(); $pane->style = array(); $pane->css = array(); $pane->extras = array(); $pane->position = 0; $display->content['new-1'] = $pane; $display->panels['middle'][0] = 'new-1'; # Topplista $pane = new stdClass; $pane->pid = 'new-2'; $pane->panel = 'middle'; $pane->type = 'views_panes'; $pane->subtype = 'topplista_terms-panel_pane_1'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'link_to_view' => 1, 'more_link' => 0, 'use_pager' => 0, 'pager_id' => '', 'items_per_page' => '10', 'offset' => '0', 'path' => 'flaktavling/topplista/klasser', 'override_title' => 0, 'override_title_text' => '', ); $pane->cache = array(); $pane->style = array(); $pane->css = array(); $pane->extras = array(); $pane->position = 1; $display->content['new-2'] = $pane; $display->panels['middle'][1] = 'new-2'; # Senaste bilder $pane = new stdClass; $pane->pid = 'new-3'; $pane->panel = 'middle'; $pane->type = 'views_panes'; $pane->subtype = 'senaste_bilderna-panel_pane_1'; $pane->shown = TRUE; $pane->access = array(); $pane->configuration = array( 'link_to_view' => 0, 'more_link' => 0, 'use_pager' => 0, 'pager_id' => '', 'items_per_page' => '2', 'offset' => '0', 'path' => 'galleri/senaste-bilder', 'override_title' => 0, 'override_title_text' => '', ); $pane->cache = array(); $pane->style = array(); $pane->css = array( 'css_id' => 'pane-senaste-bilderna', 'css_class' => '', ); $pane->extras = array(); $pane->position = 2; $display->content['new-3'] = $pane; $display->panels['middle'][2] = 'new-3'; $display->hide_title = PANELS_TITLE_FIXED; $display->title_pane = 'new-1'; $handler->conf['display'] = $display; $page->default_handlers[$handler->name] = $handler; Here´s the view senaste_bilderna <?php $view = new view; $view->name = 'senaste_bilderna'; $view->description = ''; $view->tag = ''; $view->view_php = ''; $view->base_table = 'node'; $view->is_cacheable = FALSE; $view->api_version = 2; $view->disabled = FALSE; /* Edit this to true to make a default view disabled initially */ $handler = $view->new_display('default', 'Förvalt', 'default'); $handler->override_option('fields', array( 'field_picture_fid' => array( 'id' => 'field_picture_fid', 'table' => 'node_data_field_picture', 'field' => 'field_picture_fid', ), )); $handler->override_option('sorts', array( 'created' => array( 'order' => 'DESC', 'granularity' => 'second', 'id' => 'created', 'table' => 'node', 'field' => 'created', 'relationship' => 'none', ), )); $handler->override_option('filters', array( 'type' => array( 'operator' => 'in', 'value' => array( 'ils_picture' => 'ils_picture', ), 'group' => '0', 'exposed' => FALSE, 'expose' => array( 'operator' => FALSE, 'label' => '', ), 'id' => 'type', 'table' => 'node', 'field' => 'type', 'override' => array( 'button' => 'Åsidosätt', ), 'relationship' => 'none', ), )); $handler->override_option('access', array( 'type' => 'none', )); $handler->override_option('cache', array( 'type' => 'none', )); $handler->override_option('title', 'Senaste bilderna från galleriet'); $handler->override_option('items_per_page', 2); $handler->override_option('row_options', array( 'inline' => array( 'field_picture_fid' => 'field_picture_fid', ), 'separator' => '', 'hide_empty' => 0, )); $handler = $view->new_display('panel_pane', 'Content pane', 'panel_pane_1'); $handler->override_option('pane_title', ''); $handler->override_option('pane_description', ''); $handler->override_option('pane_category', array( 'name' => 'View panes', 'weight' => 0, )); $handler->override_option('allow', array( 'use_pager' => FALSE, 'items_per_page' => FALSE, 'offset' => FALSE, 'link_to_view' => FALSE, 'more_link' => FALSE, 'path_override' => FALSE, 'title_override' => FALSE, 'exposed_form' => FALSE, )); $handler->override_option('argument_input', array()); $handler->override_option('link_to_view', 0); $handler->override_option('inherit_panels_path', 0); $handler = $view->new_display('page', 'Sida', 'page_1'); $handler->override_option('path', 'galleri/senaste-bilderna'); $handler->override_option('menu', array( 'type' => 'none', 'title' => '', 'description' => '', 'weight' => 0, 'name' => 'navigation', )); $handler->override_option('tab_options', array( 'type' => 'none', 'title' => '', 'description' => '', 'weight' => 0, )); I have edited one views template, here's the code in the file views-view-fields--senaste-bilderna.tpl.php <?php // $Id: views-view-fields.tpl.php,v 1.6 2008/09/24 22:48:21 merlinofchaos Exp $ /** * @file views-view-fields.tpl.php * Default simple view template to all the fields as a row. * * - $view: The view in use. * - $fields: an array of $field objects. Each one contains: * - $field->content: The output of the field. * - $field->raw: The raw data for the field, if it exists. This is NOT output safe. * - $field->class: The safe class id to use. * - $field->handler: The Views field handler object controlling this field. Do not use * var_export to dump this object, as it can't handle the recursion. * - $field->inline: Whether or not the field should be inline. * - $field->inline_html: either div or span based on the above flag. * - $field->separator: an optional separator that may appear before a field. * - $row: The raw result object from the query, with all data it fetched. * * @ingroup views_templates */ ?> <?php foreach ($fields as $id => $field): ?> <?php $result = db_query('SELECT * FROM {files} WHERE fid = ' . $row->node_data_field_picture_field_picture_fid ); ?> <?php $data = db_fetch_object( $result ); ?> <div id="senaste-bilderna-first"><img src="<?= imagecache_create_url('senaste_bilderna_thumbnail', $data->filepath) ?>" alt="" /></div> <?php /* if (!empty($field->separator)): <?php print $field->separator; <?php endif; <<?php print $field->inline_html; class="views-field-<?php print $field->class; "> <?php if ($field->label): <label class="views-label-<?php print $field->class; "> <?php print $field->label; : </label> <?php endif; <?php // $field->element_type is either SPAN or DIV depending upon whether or not // the field is a 'block' element type or 'inline' element type. <<?php print $field->element_type; class="field-content"><?php print $field->content; </<?php print $field->element_type; > </<?php print $field->inline_html;> <?php*/ endforeach; ?> This is the result <div class="panel-separator"> </div> <div class="panel-pane pane-views-panes pane-senaste-bilderna-panel-pane-1" id="pane-senaste-bilderna"> <h2 class="pane-title">Senaste bilderna från galleriet </h2> <div class="pane-content"> <div class="view view-senaste-bilderna view-id-senaste_bilderna view-display-id-panel_pane_1 view-dom-id-2"> <div class="view-content"> <div class="views-row views-row-1 views-row-odd views-row-first"> </div> <div class="views-row views-row-2 views-row-even views-row-last"> </div> </div> </div> </div> </div> My Drupal version is 6.16

  Read the article

• Inheritance of templates in WPF

  - by Alxandr

  I'm trying to make sure that every child of a given element (MPF.MWindow) gets custom templates. For instance, the button should get the template defined in resMButton.xaml. As of now I'm using the following code on: (resMWindow.xaml) <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:MPF"> <Style x:Key="SystemKeyAnimations" TargetType="{x:Type Button}"> <Setter Property="Opacity" Value="0.5" /> <Setter Property="Background" Value="Transparent" /> <Style.Triggers> <EventTrigger RoutedEvent="Mouse.MouseEnter"> <BeginStoryboard> <Storyboard> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetProperty="Opacity"> <SplineDoubleKeyFrame KeyTime="00:00:00.2" Value="1.0" /> </DoubleAnimationUsingKeyFrames> </Storyboard> </BeginStoryboard> </EventTrigger> <EventTrigger RoutedEvent="Mouse.MouseLeave"> <BeginStoryboard> <Storyboard> <DoubleAnimationUsingKeyFrames BeginTime="00:00:00" Storyboard.TargetProperty="Opacity"> <SplineDoubleKeyFrame KeyTime="00:00:00.2" Value="0.5" /> </DoubleAnimationUsingKeyFrames> </Storyboard> </BeginStoryboard> </EventTrigger> </Style.Triggers> </Style> <Style TargetType="{x:Type local:MWindow}"> <!-- Remove default frame appearance --> <Setter Property="WindowStyle" Value="None" /> <Setter Property="AllowsTransparency" Value="True" /> <Setter Property="Background" Value="Transparent" /> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:MWindow}"> <Border Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" x:Name="ChromeBorder"> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="4" /> <ColumnDefinition /> <ColumnDefinition Width="4" /> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="4" /> <RowDefinition /> <RowDefinition Height="4" /> </Grid.RowDefinitions> <Thumb Grid.Row="0" Grid.Column="1" x:Name="TopThumb" Cursor="SizeNS" BorderThickness="4" BorderBrush="Transparent" /> <Thumb Grid.Row="2" Grid.Column="1" x:Name="BottomThumb" Cursor="SizeNS" BorderThickness="4" BorderBrush="Transparent" /> <Thumb Grid.Row="1" Grid.Column="0" x:Name="LeftThumb" Cursor="SizeWE" BorderThickness="4" BorderBrush="Transparent" /> <Thumb Grid.Row="1" Grid.Column="2" x:Name="RightThumb" Cursor="SizeWE" BorderThickness="4" BorderBrush="Transparent" /> <Thumb Grid.Row="0" Grid.Column="0" x:Name="TopLeftThumb" Cursor="SizeNWSE" BorderThickness="5" BorderBrush="Transparent" /> <Thumb Grid.Row="0" Grid.Column="2" x:Name="TopRightThumb" Cursor="SizeNESW" BorderThickness="5" BorderBrush="Transparent" /> <Thumb Grid.Row="2" Grid.Column="0" x:Name="BottomLeftThumb" Cursor="SizeNESW" BorderThickness="5" BorderBrush="Transparent" /> <Thumb Grid.Row="2" Grid.Column="2" x:Name="BottomRightThumb" Cursor="SizeNWSE" BorderThickness="5" BorderBrush="Transparent" /> <Grid Grid.Row="1" Grid.Column="1"> <Grid.RowDefinitions> <RowDefinition Height="20" /> <RowDefinition /> </Grid.RowDefinitions> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition /> <ColumnDefinition Width="Auto" /> </Grid.ColumnDefinitions> <StackPanel Orientation="Horizontal" Grid.Column="1"> <Button Command="local:WindowCommands.Minimize" Style="{StaticResource ResourceKey=SystemKeyAnimations}"> <Button.Template> <ControlTemplate> <Canvas Width="10" Height="10" Margin="5" Background="Transparent"> <Line X1="0" X2="10" Y1="5" Y2="5" Stroke="White" StrokeThickness="2" /> </Canvas> </ControlTemplate> </Button.Template> </Button> <Button Command="local:WindowCommands.Maximize" x:Name="MaximizeButton" Style="{StaticResource ResourceKey=SystemKeyAnimations}"> <Button.Template> <ControlTemplate> <Canvas Width="10" Height="10" Margin="5" Background="Transparent"> <Rectangle Width="10" Height="10" Stroke="White" StrokeThickness="2" /> </Canvas> </ControlTemplate> </Button.Template> </Button> <Button Command="ApplicationCommands.Close" Style="{StaticResource ResourceKey=SystemKeyAnimations}"> <Button.Template> <ControlTemplate> <Canvas Width="10" Height="10" Margin="5" Background="Transparent"> <Line X1="0" X2="10" Y1="0" Y2="10" Stroke="White" StrokeThickness="2" /> <Line X1="10" X2="0" Y1="0" Y2="10" Stroke="White" StrokeThickness="2" /> </Canvas> </ControlTemplate> </Button.Template> </Button> </StackPanel> <ContentControl x:Name="TitleContentControl"> <TextBlock Text="{TemplateBinding Title}" Foreground="DarkGray" Margin="5,0" /> </ContentControl> </Grid> <ContentPresenter Content="{TemplateBinding Content}" Grid.Row="1"> <ContentPresenter.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/MPF;component/Themes/resMWindowContent.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </ContentPresenter.Resources> </ContentPresenter> </Grid> </Grid> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary> As you can see during the ContentPresenter which gets the content of the window I merge in a dicrionary called resMWindowContent.xaml. The resMWindowContent.xaml looks as following: <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:MPF"> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/MPF;component/Themes/resMButton.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> It simply merges in the resMButton.xaml dictionary (this is done because in the feature I will have MTextBox, mList... and I want to separate them). The resMButton.xaml looks as following: <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:MPF"> <Style TargetType="{x:Type Button}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type Button}"> <Grid Background="Transparent"> <Rectangle Stroke="{TemplateBinding BorderBrush}" StrokeThickness="{TemplateBinding BorderThickness}" Fill="{TemplateBinding Background}" /> <ContentPresenter Content="{TemplateBinding Content}" Margin="3" /> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary> A simple template drawing a square button. However, it isn't applied at all. My buttons remain normal, and I don't understand what I'm doing wrong. I just want every button inside the MWindow to get a special style (and in time every textbox and so forth). How do I achieve this? One note though: It's important that the styles doesn't apply to elements outside an MWindow.

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >