Search Results

Search found 24334 results on 974 pages for 'directory loop'.

Page 841/974 | < Previous Page | 837 838 839 840 841 842 843 844 845 846 847 848  | Next Page >

• Windows 7 VPN Error 619

  - by TravisPUK

  So I am running Windows 7 Enterprise. This morning I was able to VPN using the built in VPN (Connect to Work Network etc). I had to change my network's IP address range and now the VPN will not work. It just stalls on the Verifying user name and password... message. But then it returns the 619 error. Anybody know why changing my machine's IP address would cause this problem? Where should I be looking to try and fix this issue? I have tried this on a Windows XP machine that also had the IP address range change and this still connects fine using exactly the same connection details. EDIT The internal network range changed from 192.x.x.x to 10.x.x.x. This was done on the entire Active Directory. All machines are running fine and the Windows XP machine, that works going to the same client VPN mentioned above is on the same network. Both the XP and the Win 7 machines are using DHCP served by the Domain Controller. The client domain is not performing any IP range checks/restrictions. The VPN is outside the internal network, connection is being made via the Internet and not passing through any other machine, other than the normal domain machines, ie DNS etc. This is passing through a router and the router has the relevant VPN passthrough options configured. All internal machines are working correctly with other forms of VPN, ie Cisco, Sonic etc (these were tested on other machines, they are not installed on the Vista or Win7 machines). After further testing, this is occurring on all Win7 and Vista machines where they can no longer connect to the client VPN, however all XP machines can still connect fine. This has been tested on three Vista, two Win7 and five XP machines. All machines are on DHCP and tests have been done with both the firewalls turned on and off, as well as with fixed IPs being used. Thanks Travis

  Read the article

• Programs don't have permissions when using absolute path

  - by Markos

  I have asked this on askubuntu but didn't get a single response in days, so I will try it here. I have directory structure like this: /path/dir1 - all users in group1 must have rwx permissions, including subdirs and newly created dirs /path/dir1/dir2 - also users in group2 must have rwx permissions So what I tried is that I used ACL. getfacl /path/dir1 # file: /path/dir1 # owner: root # group: nogroup user::rwx group::--- group:group1:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:group1:rwx default:mask::rwx default:other::--- getfacl /path/dir1/dir2 # file: /path/dir1/dir2 # owner: root # group: nogroup user::rwx group::--- group:group1:rwx group:group2:rwx mask::rwx other::--- default:user::rwx default:group::--- default:group:group1:rwx default:group:group2:rwx default:mask::rwx default:other::--- That shows that I have granted rwx to group1 in /path/dir1 and rwx to group1 and group2 in /path/dir1/dir2. Now it gets interesting. Let's assume, that user2 is member of group2. If I issue commands as user2: cd /path/dir1/dir2 mkdir foo Then folder is succesfully created. However, if I do this: mkdir /path/dir1/dir2/foo I get permission denied error. I have tried extensively to resolve the problem. What I have found is that ACL is to blame. If I add permissions to group2 in /path/dir1 it starts to work. Also if I completely remove /path/dir1 ACL it starts to work. Obviously I am missing something VERY basic. I don't have much experience with linux, but this is a no-brainer on Windows. I have spent way too many hours to resolve this basic requirement. If you need more information, I will try to update the question, so feel free to ask!

  Read the article

• recursive grep started at / hangs

  - by Martin

  I have used following grep search pattern on multiple platforms: grep -r -I -D skip 'string_to_match' / For example on FreeBSD 8.0, FreeBSD 6.4 and Debian 6.0(squeeze). Command does a recursive search starting from root directory, assumes that binary files do not have the 'string_to_match' and skips devices, sockets and named pipes. FreeBSD 8.0 and FreeBSD 6.4 use GNU grep version 2.5.1 and Debian 6.0 uses GNU grep version 2.6.3. On FreeBSD 6.4, last information printed to stderr was "grep: /dev/cuad0: Device busy". After this grep just idles as according to "top -m io -o total" the I/O usage of grep is nonexistent. Same behavior is true under FreeBSD 8.0, but last information sent to stderr is "grep: /tmp/.wine-0: Permission denied" on my installation. In case of Debian, last output to stderr is "grep: /proc/sysrq-trigger: Input/output error". If I check the I/O usage of grep process under Debian, it is following: root@Debian:~# iotop -bp 22439 Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / Total DISK READ: 0.00 B/s | Total DISK WRITE: 0.00 B/s TID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 22439 be/4 root 0.00 B/s 0.00 B/s 0.00 % 0.00 % grep -r -I -D skip 10.10.10.99 / ^Croot@Debian:~# What might cause this? Is there a way to view which file grep is currently processing in case lsof is not present? I'm able to use lsof under Debian and looks like the problematic file name there is "0xc6b2c230 file struct, ty=0, op=0xc0d34120". I'm not sure what this is.. I'm not able to use lsof or fstat under FreeBSD. PS: I know I could use find utility, but this is not the question.

  Read the article

• nmap installation issue

  - by daasf

  vanilla centos with latest updates, installed gcc, and after ./configure:.... Configuration complete. Type make (or gmake on some *BSD machines) to compile. [root@winxp nmap-5.51]# make Makefile:375: makefile.dep: No such file or directory g++ -MM -I./liblua -I./libdnet-stripped/include -I./libpcre -I./libpcap -I./nbase - I./nsock/include -DHAVE_CONFIG_H -DNMAP_NAME=\"Nmap\" -DNMAP_URL=\"http://nmap.org\" - DNMAP_PLATFORM=\"x86_64-unknown-linux-gnu\" -DNMAPDATADIR=\"/usr/local/share/nmap\" - D_FORTIFY_SOURCE=2 main.cc nmap.cc targets.cc tcpip.cc nmap_error.cc utils.cc idle_scan.cc osscan.cc osscan2.cc output.cc payload.cc scan_engine.cc timing.cc charpool.cc services.cc protocols.cc nmap_rpc.cc portlist.cc NmapOps.cc TargetGroup.cc Target.cc FingerPrintResults.cc service_scan.cc NmapOutputTable.cc MACLookup.cc nmap_tty.cc nmap_dns.cc traceroute.cc portreasons.cc xml.cc nse_main.cc nse_utility.cc nse_nsock.cc nse_dnet.cc nse_fs.cc nse_nmaplib.cc nse_debug.cc nse_pcrelib.cc nse_binlib.cc nse_bit.cc > makefile.dep /bin/sh: g++: command not found make: *** [makefile.dep] Error 127 [root@winxp nmap-5.51]# yum install g++ -y Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * addons: mirror.ash.fastserv.com * base: centos.mirror.choopa.net * extras: mirror.trouble-free.net * updates: mirror.nexcess.net Setting up Install Process No package g++ available. Nothing to do [root@winxp nmap-5.51]#

  Read the article

• django : nginx : jquery css not being served

  - by PlanetUnknown

  I'm using apache+mod_wsgi for django. And all css/js/images are served through nginx. For some odd, reason when others/friends/colleagues try accessing the site, jquery/css is not getting loaded for them, hence the page looks jumbled up. My html files use code like this - <link rel="stylesheet" type="text/css" href="http://x.x.x.x:8000/css/custom.css"/> <script type="text/javascript" src="http://1x.x.x.x:8000/js/custom.js"></script> My nginx configuration in sites-available is like this - server { listen 8000; server_name localhost; access_log /var/log/nginx/aa8000.access.log; error_log /var/log/nginx/aa8000.error.log; location / { index index.html index.htm; } location /static/ { autoindex on; root /opt/aa/webroot/; } } There is a directory /opt/aa/webroot/static/ which have corresponding css & js directories. The odd thing is that the pages show fine when I access them. I have cleared my cache/etc, but the page loads fine for me, from various browsers. Also, I don't see any 404 any error in the nginx log files. Actually the logs for nginx are not getting refreshed at all. I restarted the nginx server using root, is that incorrect ? There is a user www-data defined in the nginx configuration file. Any pointers would be great.

  Read the article

• ssh without password does not work for some users

  - by joshxdr

  I have a new RHEL4 Linux box that I am using to copy data to old Solaris 2.6 and RHEL3 Linux boxes with scp. I have found that with the same setup, it works for some users but not for others. For user jane, this works fine: jane@host1$ ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/osborjo/.ssh/identity debug1: Offering public key: /mnt/home/osborjo/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). for user jack it does not: jack@host1 ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/oper1/.ssh/identity debug1: Offering public key: /mnt/home/oper1/.ssh/id_rsa debug1: Authentications that can continue: publickey,password,keyboard-interactive I have looked at the permissions for all the keys and files, they look the same. Since I am using home directories mounted by NFS, the keys for both the remote host and the local host are in the same directory. This is how things look for jane: jane@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jane operator 394 Jan 27 16:28 authorized_keys -rw------- 1 jane operator 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jane operator 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jane operator 1205 Jan 27 16:46 known_hosts For user jack: jack@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jack engineer 394 Jan 27 16:28 authorized_keys -rw------- 1 jack engineer 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jack engineer 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jack engineer 1205 Jan 27 16:46 known_hosts As a last ditch effort, I copied the authorized_keys, id_rsa, and id_rsa.pub from jill to jack, and changed the username in authorized_keys and id_rsa.pub with vi. It still did not work. It seems there is something different between the two users but I cannot figure out what it is.

  Read the article

• samba4 not building in Arch

  - by kmplsv

  cp bin/tdbtool bin/tdbdump bin/tdbbackup /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/bin cp ./include/tdb.h /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/include cp tdb.pc /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/pkgconfig cp libtdb.a libtdb.so.1.2.4 /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib rm -f /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so ln -s libtdb.so.1.2.4 /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so rm -f /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so.1 ln -s libtdb.so.1.2.4 /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so.1 mkdir -p /tmp/yaourt-tmp-root/aur-samba4/pkg/`/tmp/yaourt-tmp-root/aur-samba4/src/bin/python -c "import distutils.sysconfig; print distutils.sysconfig.get_python_lib(1, prefix='/opt/samba4/samba')"` cp tdb.so /tmp/yaourt-tmp-root/aur-samba4/pkg/`/tmp/yaourt-tmp-root/aur-samba4/src/bin/python -c "import distutils.sysconfig; print distutils.sysconfig.get_python_lib(1, prefix='/opt/samba4/samba')"` /bin/install -c -d /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/share/man/man8 for I in manpages/*.8; do \ /bin/install -c -m 644 $I /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/share/man/man8; \ done /bin/install: cannot stat `manpages/*.8': No such file or directory make: *** [installdocs] Error 1 Aborting... ==> ERROR: Makepkg was unable to build samba4. ==> Restart building samba4 ? [y/N] ==> ------------------------------- ==>c Any ideas as what is causing my build to fail? I assume it's an issue with manpages I can't figure out exactly what package it is looking for that I don't have.

  Read the article

• GitLab post-receive hook not firing

  - by Ben Graham

  Apologies if this isn't the right stackexchange. I have a GitLab install. It was installed over the top of a gitolite install that was only a few days old, and I assume this non-standard setup is at the root of my problem, but I cannot pin it down. The problem is straightforward: post-receive hooks are not fired. This prevents 'project activity' appearing in GitLab. The problem looks like: $ git push #... error: cannot run hooks/post-receive: No such file or directory Hook Exists The post-receive hook/symlink exists and is executable: -rwxr-xr-x 1 git git 470 Oct 3 2012 .gitolite/hooks/common/post-receive lrwxrwxrwx 1 git git 45 Oct 3 2012 repositories/project.git/hooks/post-receive -> /home/git/.gitolite/hooks/common/post-receive It's Executable By GitLab The gitlab user can execute the script (I have removed the /dev/null redirect and fed in blank input to get an 'OK' as output): sudo su - gitlab -c /home/git/.gitolite/hooks/common/post-receive OK GitLab Can Find It GitLab is looking for hooks in the correct location: $ grep hooks /srv/gitlab/gitlab/config/gitlab.yml hooks_path: /home/git/.gitolite/hooks/ and $ bundle exec rake gitlab:app:status RAILS_ENV=production # ... /home/git/.gitolite/hooks/common/post-receive exists? ............YES Environment The env -i line in the hook is commonly cited as an issue. I think that would occur after this problem, but for completeness, redis-cli is found OK: $ env -i redis-cli redis> I've run out of debugging ideas on this one. Does anybody have any suggestions?

  Read the article

• Resize Win2003 system+boot partitions to bigger disks & different controller?

  - by ane

  Have an old Win2003 server with 1 SCSI hard drive partitioned as follows: D: boot (includes D:\ntldr, boot.ini, etc.) C: system (includes C:\WINDOWS) Want to move the whole system to new hardware with bigger drives and different controllers. Specifically, C: to a 300GB SAS drive, and D: to a 2TB SATA drive. Tried: VMWare Converter - VMWare Server - Diskpart Result: Diskpart refuses to resize system or boot disks VMWare Converter - VMWare Server - GParted Result: Will not boot (see http://serverfault.com/questions/219868/resize-ntfs-system-partitions-with-gparted ) Attach original VMWare disk to a duplicate VMWare install - Diskpart Result: Will not boot (goes to Directory Services Restore mode) Backup Exec System Recovery Server Edition 2010 with Restore Anywhere (tried restoring both to VMWare and to the bare system, without VMWare) Result: Windows Boot error: Could not read from the selected boot disk. Check boot path. Supposedly this is a boot.ini problem, so I try bootcfg /rebuild from the recovery console. Says it can't find windows partition so it can't rebuild. Thought about Ghost but it's completely different hardware/controllers that we're restoring to, so I doubt it would boot. Reinstalling Windows from scratch is not an option due to critical custom software heavily embedded on the original machine. Has anyone been in a similar situation (with unusual boot/system partitions) before and figured out how to resize onto different disks?

  Read the article

• Help me please with this error

  - by Brandon

  I setup IIS. I moved my folder with all the files to the IIS directory. Now when I go to http://localhost/thefolder I get: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)] Luxand.FSDK.ActivateLibrary(String LicenseKey) +0 FaceRecognition._Default.Page_Load(Object sender, EventArgs e) in D:\Project Details\Layne Projects\DotNet Project\FaceRecognition\FaceRecognition\Default.aspx.cs:60 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42 System.Web.UI.Control.OnLoad(EventArgs e) +132 System.Web.UI.Control.LoadRecursive() +66 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428

  Read the article

• Converting software RAID1 to RAID10 for /boot

  - by luckytaxi

  Array info: /dev/md0 - /dev/sda1 and /dev/sdb1 /dev/md2 - /dev/sda2 and /dev/sdb2 Partition info: /boot - /dev/md0 / - /dev/md1 I have two drives that are setup as RAID1 using software RAID on Redhat. I added two additional drives (same size) and I would like to conver the RAID1 to a RAID10. The problem I'm having is adding the last drive to the array. I've gotten as far as creating a RAID10 with two missing devices but as soon as I add the last drive, all hell breaks loose. It seems /dev/sda1 is the culprit. What I'm not too sure about is how to create the RAID10. I've tried the following mdadm --create /dev/md2 --level=raid10 --raid-device=4 /dev/sdc1 missing /dev/sdd1 missing I then proceeded to fail /dev/sdb1 from /dev/md0 and added that partition to /dev/md2. I proceeded to install the MBR on EACH partition since boot resides on /dev/sdx1 on each drive. As a test, all is well, I'm able to boot back into the system once I do a quick reboot. Now, when I go add the last drive /dev/sda1, it breaks. I attempted to install grub on /dev/sda1 and I get the following ... grub> root (hd0,0) /dev/sda root (hd0,0) /dev/sda Filesystem type is ext2fs, partition type 0xfd grub> setup (hd0) setup (hd0) Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type At this point, the array is hosed I believe. I rebooted the server and it refuses to boot.

  Read the article

• Completely remove and freshly install MySql on XP?

  - by Corey Ogburn

  I have read this question and have not found it as a solution and I have even attempted much more. I've uninstalled MySql 5.5.18 and deleted: C:\Program Files\MySql C:\Documents and Settings\All Users\Application Data\MySql After uninstalling, I restart the computer. When I reinstall, in the MySql Server Instance Configuration Wizard I leave everything to their defaults except: I add a firewall exception I check Launch MySQL Server Automatically I check Include BIN directory in windows path Enable root access from remote machines (I'll lock that down later, just debugging for now, I have also tried installing without this option to no avail) I've tried Typical and Complete while installing, as well as with and without strict mode. No combination shows a difference. After all this, it cannot Apply Security Settings and I get a 10061 error (it also said error number 2003) and this article didn't help. I've tried everything I can to completely uninstall and successfully reinstall so I can start from scratch. I've uninstalled and reinstalled about a dozen times with minor changes (including turning off the firewall at times), each time deleting the above folders and any proper registry entries with no success. Note by success, applying security settings and a working remote connection. I can connect locally every time, but it's remotely that counts. I have tried to look for exterior problems such as port forwarding in the router and (even though the installer should add it) I do double check the firewall settings, which have always allowed the default port. I'm out of ideas.

  Read the article

• How can I take a one time full backup of a Windows Server without the need for a restore program?

  - by TheCleaner

  I have a Windows SBS server with about 500GB of data that I'm decommissioning but I'd like to take a final backup of the server and place it on an external USB drive. I already have multiple backups of the server on disk from the past but they are through Simpana Commvault. I'd like a backup that will simply copy the file structure, ACLs, timestamps, etc. as is to a NTFS volume on the external drive. This way if someone says "I need x file on the server you decommed" I can search the external drive real quick instead of firing up Commvault, cataloging, restore, etc. I know the built-in Windows backup is great, I just don't feel like running it for a restore job on this. I'd like an option where in the future it won't require a program to run a restore. Rather a simple mount of the drive will suffice. I believe I can use robocopy just fine, but I'm not sure if it will grab the Windows directory, system files, and full user profiles correctly even with the /ZB option. Options? Is Robocopy /E /ZB /COPYALL /DCOPY:DAT /MT:32 /R:5 /W:5 /LOG:copylog.log the way to go here?

  Read the article

• How do I ensure a process is running, even if it kills itself? (it needs to be restarted then)

  - by le_me

  I'm using linux. I want a process (an irc bot) to run every time I start the computer. But I've got a problem: The network is bad and it disconnects often, so I need to manually restart the bot a few times a day. How do I automate that? Additional information: The bot creates a pid file, called bot.pid The bot reconnects itself, but only a few times. The network is too bad, so the bot kills itself sometimes because it gets no response. What I do currently (aka my approach ;) ) I have a cron job executing startbot.rb every 5 minutes. (The script itself is in the same directory as the bot) The script: #!/usr/bin/ruby require 'fileutils' if File.exists?(File.expand_path('tmp/bot.pid')) @pid = File.read(File.expand_path('tmp/bot.pid')).chomp!.to_i begin raise "ouch" if Process.kill(0, @pid) != 1 rescue puts "Removing abandoned pid file" FileUtils.rm(File.expand_path('tmp/bot.pid')) puts "Starting the bot!" Kernel.exec(File.expand_path('./bot.rb')) else puts "Bot up and running!" end else puts "Starting the bot!" Kernel.exec(File.expand_path('./bot.rb')) end What this does: It checks if the pid file exists, if that's true it checks if kill -s 0 BOT_PID == 1 (if the bot's running) and starts the bot if one of the two checks fail/are not true. My approach seems to be quite dirty so how do I do it better?

  Read the article

• Can't open cocoa emacs from terminal using open -a

  - by Shane

  I installed emacs on my MacBook Air running Mac OS X 10.6.5 from this site http://emacsformacosx.com/. I believe this is what used to be called cocoa emacs. I dragged it into my Application folder and it works fine when I run it from there. I want to be able to run it from the Terminal. After some googling, I tried open -a /Application/Emacs.app foo.txt (foo.txt was and existing file). I got two emacs windows - one with welcome screen and one with foo.txt loaded. I tried a few applications in the /Applications directory and they did not seem to behave like this. I had installed it using my own account (an admin account) so after doing ls -l on /Application I noticed that the owner and group were different from the other entries in this folder. I recursively changed the owner and group to root and wheel, like the others, but this did not help. The only thing that looks funny now is that there that ls -l show a @ character which has something to do with extended attributes but I don't know how to check these. Any suggestions on what to check next? Is using the open command the only to run the program? Can I simulate what it does using a shell script?

  Read the article

• Webapp in Jetty can't find properties file after running a couple days

  - by Cuga

  I have a webapp running in Jetty on Mac OS 10.6. After a few days of it running and without the server losing power or rebooting, it seems to stop working saying it can't find a properties file. This properties file is included inside the .war file deployed to the /webapps directory. If I restart Jetty as the superuser the web service works again just fine. Can anyone lend any advice to what's going on and how I can fix it? The error being shown when it isn't working is: Problem accessing /my-web-service. Reason: INTERNAL_SERVER_ERROR Caused by: java.lang.NullPointerException at com.company.service.Dao.readFromPropertiesFile(BwDao.java:35) at com.company.service.ServletHandler.doGet(ProxyClass.java:66) ... at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404) at org.mortbay.io.nio.SelectChannelEndPoint.run(SelectChannelEndPoint.java:410) at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:582) Here's where the properties files exist that it's trying to read from the .war file: And this is how the properties are being read from the classpath: Properties properties = new Properties(); properties.load(Thread.currentThread().getContextClassLoader().getResourceAsStream( "app.properties")); Again, this does work just fine if I have just restarted the server, but it seems to fail after running a few days.

  Read the article

• Setup 2003 R2 Radius server to work on vista/seven

  - by Fox

  Hi All, I'm currently trying to configure my 2003 R2 server RADIUS module to enable WIFI client to authenticate throught my Active Directory. The RADIUS server use MS-CHAP V2 as encryption method. I got several Access Point running DD-WRT, configured to use WPA2-Enterprise security that use Radius Server. Everything is setup, and almost working. When I say almost working, I mean, I can login using my AD Credential on my IPod or even on a MacBook running OS X, Windows XP also work with some little tweak in connection properties. The problem is Windows Vista or Windows Seven clients computers that are not inside domain. It doesn't work at all, it doesn't even prompt for user/password/domain. I already install the patch for IAS to make the certsrv compatible with Vista and Seven, but still doesn't work. Anyone ever encounter the same issue I have right now? I'm searching for a solution to this for several already and still not find anything. Looks like many people have the same issue too. Thanks all for you eventual answers.

  Read the article

• How to cache authentication in Linux using PAM/Kerberos authentication (for CVS)?

  - by Calonthar

  We have several Linux servers that authenticate Linux user passwords on our Windows Active Directory Server using PAM and Kerberos 5. The Linux distro we use is CentOS 6. On one system, we have several Version Control Systems like CVS and Subversion, both of which authenticate users throug PAM, such that users can use their normal Unix resp. Windows AD accounts. Since we started using Kerberos for password authentication, we experienced that CVS on a client machine is often much slower in establishing a connection. CVS authenticates the user on every request (eg. cvs diff, log, update...). Is is possible to cache the credentials that kerberos uses, sucht that is does not need to ask the Windows AD server every time a user executes a cvs action? Our PAM config /etc/pam.d/system-auth looks like the following: auth required pam_env.so auth sufficient pam_unix.so nullok try_first_pass auth requisite pam_succeed_if.so uid >= 500 quiet auth sufficient pam_krb5.so use_first_pass auth required pam_deny.so account required pam_unix.so broken_shadow account sufficient pam_succeed_if.so uid < 500 quiet account [default=bad success=ok user_unknown=ignore] pam_krb5.so account required pam_permit.so password requisite pam_cracklib.so try_first_pass retry=3 password sufficient pam_unix.so md5 shadow nullok try_first_pass use_authtok password sufficient pam_krb5.so use_authtok password required pam_deny.so session optional pam_keyinit.so revoke session required pam_limits.so session [success=1 default=ignore] pam_succeed_if.so service in crond quiet use_uid session required pam_unix.so session optional pam_krb5.so

  Read the article

• Creating an ec2 image on amazon fails at mkfs.ext3

  - by Dave Orr

  I'm trying to create an image of my ec2 instance in Amazon's cloud. It's been a bit of an adventure so far. I did manage to install Amazon's ec2-api-tools, which was harder than it seemed like it should have been. Then I ran: ec2-bundle-vol -d /mnt -k pk-{key}.pem -c cert-{cert}.pem -u {uid} -s 1536 Which returned: Copying / into the image file /mnt/image... Excluding: /sys/kernel/debug /sys/kernel/security /sys /proc /dev/pts /dev /dev /media /mnt /proc /sys /etc/udev/rules.d/70-persistent-net.rules /etc/udev/rules.d/z25_persistent-net.rules /mnt/image /mnt/img-mnt 1+0 records in 1+0 records out 1048576 bytes (1.0 MB) copied, 0.00677357 s, 155 MB/s mkfs.ext3: option requires an argument -- 'L' Usage: mkfs.ext3 [-c|-l filename] [-b block-size] [-f fragment-size] [-i bytes-per-inode] [-I inode-size] [-J journal-options] [-G meta group size] [-N number-of-inodes] [-m reserved-blocks-percentage] [-o creator-os] [-g blocks-per-group] [-L volume-label] [-M last-mounted-directory] [-O feature[,...]] [-r fs-revision] [-E extended-option[,...]] [-T fs-type] [-U UUID] [-jnqvFKSV] device [blocks-count] ERROR: execution failed: "mkfs.ext3 -F /mnt/image -U 1c001580-9118-4a50-9a25-dcf02be6d25f -L " So mkfs.ext3 wants -L, which is a volume name. But ec2-bundle-vol doesn't seem to take in a volume name as an argument, and the docs (http://docs.amazonwebservices.com/AmazonEC2/gsg/2006-06-26/creating-an-image.html) don't seem to think one should be needed. Certainly their sample command: # ec2-bundle-vol -d /mnt -k ~root/pk-HKZYKTAIG2ECMXYIBH3HXV4ZBZQ55CLO.pem -u 495219933132 -s 1536 doesn't specify anything. So... any help? What am I missing?

  Read the article

• installed mysql using yum but mysqld dowsnt start: Fedora 16

  - by Sumit Singh Bir

  i installed mysql mysql-server and mysql-libs ... after installation i thought to start the mysql service using command systemctl start mysqld.service Failed to issue method call: Unit mysqld.service failed to load: Invalid argument. See system logs and 'systemctl status mysqld.service' for details. systemctl status mysqld.service this said that it had an invalid argument then i changed the content of mysqld.service with this File: /etc/systemd/system/mysqld.service [Unit] Description=MySQL database server After=syslog.target After=network.target [Service] User=mysql Group=mysql ExecStart=/usr/sbin/mysqld --pid-file=/var/run/mysqld/mysqld.pid ExecStop=/bin/kill -15 $MAINPID PIDFile=/var/run/mysqld/mysqld.pid # We rely on systemd, not mysqld_safe, to restart mysqld if it dies Restart=always # Place temp files in a secure directory, not /tmp PrivateTmp=true [Install] WantedBy=multi-user.target now i found that the error for invalid argument was resolved and mysqld.service was loaded but not enabled ... using systemctl start mysqld.service worked fine ... it workedddd! but then enabling it systemctl enable mysqld.service or service mysqld start did not do anything but the curdor kept on blinking after i pressed enter ... now the thing is that for this f16 i wasted my HDD space for development work and i cannot figure out a way ... please somebody help

  Read the article

• Centos/Postfix able to send mail but not receive it

  - by Dan Hastings

  I have set up postfix and used the mail command to test and an email was successfully sent and delivered. The email arrived in my yahoo inbox BUT the sender also recieved an email in the Maildir directory saying "I'm sorry to have to inform you that your message could not be delivered to one or more recipients", even though the message was delivered. I tried replying from yahoo to the email but it never arrived. I have 1 MX record added to godaddy which i did last week. Priority0 Host @ Points to mail.domain.com TTL1 Hour Postfix main.cf has the following added to it myhostname = mail.domain.com mydomain = domain.com myorigin = $mydomain inet_interfaces = all mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mynetworks = 192.168.0.0/24, 127.0.0.0/8 relay_domains = home_mailbox = Maildir/ I checked var/logs/maillog and found the following errors occuring postfix/anvil[18714]: statistics: max connection rate 1/60s for (smtp:unknown) at Jun 3 09:30:15 postfix/anvil[18714]: statistics: max connection count 1 for (smtp:unknown) at Jun 3 09:30:15 postfix/anvil[18714]: statistics: max cache size 1 at Jun 3 09:30:15 postfix/smtpd[18772]: connect from unknown[unknown] postfix/smtpd[18772]: lost connection after CONNECT from unknown[unknown] postfix/smtpd[18772]: disconnect from unknown[unknown] output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all inet_protocols = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 168.100.189.0/28, 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550

  Read the article

• Automate creation of Windows startup script?

  - by Niten

  Is there a good way to automate installing local startup (rather than login) scripts in Windows XP and Windows 7, via the command line, WMI, COM, or otherwise (even Win32 if it comes to that)? I need to setup a local startup script on a large number of computers, and unfortunately, Active Directory is absolutely not an option. I would like to write a script or small program that I can run on each computer to perform the startup script installation in order to save myself a lot of error-prone point-and-click manual labor. I see that when one uses gpedit.msc to create a local startup script, information about the script gets stored in the registry here: HKLM\Software\Policies\Microsoft\Windows\System\Scripts\Startup However, if you create such a script and then delete its registry key, the script will remain listed in the local Group Policy editor; as is so often the case in Windows, apparently there is more going on there than meets the eye. This leads me to question whether it's safe to manually add subkeys for new startup scripts here (I wouldn't want my script to be overwritten by later changes made using the local Group Policy editor, for instance)... Another option that's occurred to me is to create an item in the Task Scheduler configured to run at system startup. However, my concerns there are twofold: Can this be automated any more easily? For instance, the at command doesn't appear to let you schedule a task for system startup, and WMI's Win32_ScheduledJob interface looks unreliable (it fails to show any of my currently scheduled tasks, for one thing). Would I be able to prevent users from logging in until the scheduled startup task is completed, as can be done with "normal" Windows startup scripts? Thanks in advance for any suggestions, I've been banging my head against this one for a bit...

  Read the article

• FastCGI Error when installing PHP on IIS7.5

  - by ytoledano

  I'm trying to install MediaWiki on a Win2008r2 server, but can't manage to install PHP. Here's what I did: Grabbed a Zip archive of PHP and unzipped it into C:\PHP. Created two subdirs: c:\PHP\sessiondata and c:\PHP\uploadtemp. Granted modify rights to the IUSR account for the subdirs. Copied php.ini-production as php.ini Edited php.ini and made the following changes: fastcgi.impersonate = 1 cgi.fix_pathinfo = 1 cgi.force_redirect = 0 open_basedir = "c:\inetpub\wwwroot;c:\PHP\uploadtemp;C:\PHP\sessiondata" extension = php_mysql.dll extension_dir = "./ext" upload_tmp_dir = C:\PHP\uploadtemp session.save_path = C:\php\sessiondata Install Web server role, selected CGI and HTTP Redirection options. In the Handler Mappings: Added Module Mapping. Entered the following values: Path = *.php, Module = FastCgiModule, Executable = c:\php\php-cgi.exe, Name = PHP via FastCGI. Created a test page into wwwroot directory: phpinfo.php and set the contents like this: < ?php phpinfo(); ? Browsed to http://localhost/phpinfo.php But then I get: HTTP Error 500.0 - Internal Server Error An unknown FastCGI error occured Detailed Error Information Module: FastCgiModule Notification: ExecuteRequestHandler Handler: PHP via FastCGI Error Code: 0x800736b1 Requested URL: http://localhost:80/phpinfo.php Physical Path: C:\inetpub\wwwroot\phpinfo.php Logon Method: Anonymous Logon User: Anonymous Does anyone know what I'm doing wrong here? Thanks.

  Read the article

• Hyper-V VM Lab + RRAS + RDP

  - by Dennis Evans

  My background is primarily .NET Development with some System Administration skills. I'm trying to set up a VM Lab for me to test System Applications I'm developing but I've only ever done System Administration in already set up environments; I've never set up my own. My current setup: Server 2008 R2 Hyper-V Host on physical machine (only role enabled) with two NICs. First NIC dedicated for Management w/ DHCP address from company's network. Second NIC dedicated to RRAS VM w/ DHCP address from company's network. RRAS VM has two NICS, one is virtual private internal only NIC w/ static entry. The other is the physical NIC mentioned above. I've joined it to my VMLab.net internal domain. My Active Directory Domain Controller server (ADCT) also runs DNS, DHCP, and Certificate Services which I'm familiar with but don't understand completely. RRAS is already set up with NAT to provide the private internal network with Internet access. What I would like to do is be able to RDP into the servers/computers on the VMLab.net domain from my computer. Do I need to add the Remote Desktop Services role and enable the Remote Desktop Gateway service on RRAS in order to do this or is there a way to set up port forwarding on RRAS to just allow a direct connection to the internal servers...or both? What would the best practices be here? Network Diagram http://i.stack.imgur.com/4qfnk.png

  Read the article

• Firefox proxy authentication with Kerberos: one service ticket per connection (Linux)

  - by Dari

  I am trying to enable proxy authentication via Kerberos for Firefox. The setup is: Active Directory domain (for LDAP and Kerberos; this works and I can log in the computer and get Kerberos tickets without problems) Microsoft Windows witness machine (on which Firefox runs fine with no ticket problem) CentOS 6.3 system with Firefox (the tests were performed with both the 10.0.1 ESR found in the CentOS package repositories and the 15.0.1 downloaded from Mozilla's website) BlueCoat proxy with Kerberos authentication enabled For the moment, Firefox requests an element of a website, gets an HTTP error code of "407 Proxy Authentication Required" from the proxy, gets a ticket granting service (TGS) from the domain for the proxy and performs the request again while passing the ticket. The transaction runs fine. However, when more elements are requested (in parallel), Firefox requests one more ticket per proxy connection. And this takes many DNS queries, Kerberos interactions with domain controllers and costs a lot of time (for example, the home page of Adobe takes several minutes to load and at the end, I have about 30 valid Kerberos tickets). I am stuck on this since a while, and help would be greatly appreciated. Minor information: the CentOS operating system is virtualized with VMware Player 3.1.3, but I do not think this would be a game changer.

  Read the article

< Previous Page | 837 838 839 840 841 842 843 844 845 846 847 848  | Next Page >