Search Results

Search found 55281 results on 2212 pages for 'get set'.

Page 845/2212 | < Previous Page | 841 842 843 844 845 846 847 848 849 850 851 852  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Is there a way to automatically switch profiles for a RAT mouse?

    - by MBraedley
    So I bought a Cyborg RAT 7 mouse a while back, and I love it, except for one thing: it's not automatically selecting the profile for the game I've just started. This is annoying because, for instance, I have the forward and back buttons, as well as the side scroll set up for weapon selection in some games, and if the proper profile isn't selected before starting the game, none of it works. How can I get my mouse to load the proper profile when I start up a game?

    Read the article

  • Increase Audio volume on Avi files.

    - by Arch Angel
    Is there a simple way to adjust audio volume in avi files, like using MP3gain so i can set them all the same it is a problem having to keep adjusting the volume. I have tried VirtualDub but it doesnt handle my avi files as they are encoded in XVID

    Read the article

  • How do I configure dual WAN links for failover on a Cisco 891?

    - by Donjo
    I have a Cisco 891 that is going to be connected to 2 WAN links, a DSL connection and a cable connection. I'm not so concerned with load balancing between them because the DSL connection speed is a drop in the bucket when compared to the cable speed though it would be nice if it worked that way. I mainly just want to force all traffic through the cable WAN link unless it goes down. I'm not really sure what feature set I should be researching.

    Read the article

  • Unicode support between different OS and browsers

    - by Martin Trigaux
    I would like to develop a web application that uses unicode. The problem is that I don't know if the user supports or not the full unicode set. First question : is the unicode support depends on the browser or the operating system ? Second question : how well main browsers/OS behave ? To goal is to find big subsets of mainly supported unicode characters (with the fact that I accept to not support old tech) Thank you

    Read the article

  • Windows 8 Speech Recognition Language

    - by Greg
    I've got Windows 8 Pro installed (RTM version from MSDN). For an application I use I need to have the speech recognition language set to English - US. The only option I have is English - UK. I have tried going to Language in Control Panel and setting the only language to English - US, however English - UK is still the only option in speech properties. How can I add a language to the Speech Properties?

    Read the article

  • SSH with authorized_keys to an Ubuntu system with encrypted homedir?

    - by Josh
    I recently set up a new server with Ubuntu karmic 9.10, and when I created my home directory I chose to make it encrypted. Now, after loading my authorized_keys file into ~/.ssh, it isn't recognized because my home directory isn't decrypted until after I log in. Is there a way to make SSH keys work with encrypted home directories under Ubuntu?

    Read the article

  • How can i configure country code in wireless WEP communication?

    - by Renjith G
    hi I need to configure country code between my wireless communication points. I am using madwifi, wireless tools and hostapd set up in my ap(board- linux OS(2.6.10)) , and am using OLITEC stick usb 802.11g card in my windows machine. I can communicate successfully using WEP,WPA-PSK and WPA , but i need to configure some more additional options such as Country code and Beacon period and Beacon interval etc. Expecting the reply, /renjith g

    Read the article

  • Spaces in SETX PATH command

    - by Jeremy Stein
    Suppose my PATH is C:\WINDOWS\system32\;C:\Program Files\Important\ SET NEW_PATH=C:\My\Dir\ SETX PATH "%PATH%;%NEW_PATH%" Results in a path of: C:\WINDOWS\system32\;C:\Program Files\Important\;C:\My\Dir" Notice the quotation mark at the end of the path. It's as though the backslash at the end of %NEW_PATH% escaped the final quote mark. I need the quotation marks because I have spaces in my path, but I don't want backslashes to be interpreted as escape characters. What's the right way to include my PATH in the call to SETX?

    Read the article

  • How do I get the IP address of a switch.

    - by Atilla Filiz
    I have a wireless AP+switch which I configured years ago, before moving, and haven't used for a while. Now I want to reconfigure it for my new network, but have no idea what I set as its IP address(It was probably something 192.168.xx.yy). What is the best way for discovering its IP? A script to spam the whole address space?

    Read the article

  • Is virtualenv suitable for a production server?

    - by gnufs
    I'm planning to set up a Python app (Pyblosxom) on my server and considering to run it in its own virtualenv sandbox with --no-site-packages. I'm hoping that such a setup would be easily portable and maintainable over the years. However, I've only used virtualenv for development environments that recreate a certain server setup locally, and most sources about virtualenv seem to also mention virtualenv for such a use. Is there any drawback to running a Python app from a virtualenv on a live server?

    Read the article

  • Does software RAID 1 in Windows 7 improve read speeds?

    - by Rich
    As the title says, does software RAID 1 (mirroring) in Windows 7 improve read speeds? I'd like to set up RAID 1 to help protect my important documents (yes, yes, I know it's not a backup), but performance is also important to me. As I understand it, RAID 1 should theoretically be able to improve my read speeds by n times, where n is the number of disks. Is Windows 7 able to get this boost? I haven't been able to find out this information anywhere.

    Read the article

  • variable bitrate streaming under linux

    - by ufk
    Hi. i know that in Linux i can stream using vlc and ffmpeg. i was able to successfully stream using vlc but only in static bitrates. i must set 400k/s or 800k/s. i want it to use as much upload bandwidth as it can consume. so if my internet line is not busy and i'm not downloading anything the quality will be better. is it possible to do such a thing?

    Read the article

  • Google Analytics says I'm Getting 50 percent bounce rate on my website ! Help!

    - by Ali
    Hi guys, I recently launched my web application and set up google analytics to monitor it. For some weird reason google analytics shows a 49.7 percent bounce rate - I'm quite suprised as to why and how is this possible. My web application works well - I've never been bounced off even once whenever I visit it from any browser. What's going on I have no idea what to look out for here?

    Read the article

  • Real-time offline folder-to-folder backup application needed (Windows)

    - by niktech
    I recently started using Intel Matrix Storage RAID solution that allowed me to use my 5 1TB drives for two RAID volumes. First one a 1TB RAID 0 striped across all 5 drives and second one a RAID 5 across the rest of the free space on all drives (around 2.85TB usable space). The RAID 0 I use for OS, applications and games while the RAID 5 I use as a more-permanent type storage (photos, etc). Now I do realize that running the OS and applications on RAID 0 across 5 drives is very dangerous, which is what brings up the following question. Is there a reliable freeware realtime backup application that can backup a set of folders from one drive to another drive (no online backups needed)? I've already tried a few (Mozy, Yadis, Comodo Backup, GFI Backup, Idoo, Crash Plan) but none meet my requirements: Low CPU and RAM usage. Realtime Backups - as soon as a file is modified in the source folder, it is added to the backup queue which will be processed with the lowest priority when the CPU is idle. This backup queue should persist in cases of computer restarts (ie: the source and destination folders should always have the same set of files, except for the ones waiting in the backup queue). Incremental Backups - if only 10 bytes changed in a 1GB file, the app should only copy those 10 new bytes. Ability to back up locked and opened files (some apps, like Yadis, can't back up critical files like browser favorites). Ability to run as a service (no need for any user to log-in to have the app started). Optional requirements: Compression of the destination into a well-known format (RAR, Zip) that can be directly read without the use of the application. Preset source folders (such as Browser Favorites, Game Saves, Application Settings, etc). The idea is to use RAID 0 array as "semi-persistent RAM-like" storage which in case of a failure can be quickly rebuilt by reinstalling the OS, apps and games and copying over the settings, saves, favorites from the RAID 5. I'm also thinking of taking this RAID 0 as RAM idea to the extreme with SSDs (as soon as we get some nice 6Gb/s SATA III SSDs out there), where a couple of SSDs chained in RAID 0 will work as yet another semi-persistent cache layer sitting between the RAM and the HD. I'm just hoping there already exists an application that satisfies these requirements... otherwise I'll have to write one myself, which I would prefer not to do.

    Read the article

  • Change owner recursively with Powershell?

    - by Mikael Grönfelt
    I'm trying to use Powershell to change owner of a folder, recursively. I'm basically using this code: $acct1 = New-Object System.Security.Principal.NTAccount('DOMAIN\Enterprise Admins') $profilefolder = Get-Item MyFolder $acl1 = $profilefolder.GetAccessControl() $acl1.SetOwner($acct1) set-acl -aclobject $acl1 -path MyFolder This will change ownership at the first level, but not for any subfolders or files. Is there a way to extend the scope to all content of MyFolder?

    Read the article

  • Server 2008 ime keeps changine few minutes delay

    - by Raed
    Hi dears I am facing serious problem I have 2008 server and i am running web based applications. I notice that the time of the server is keep changing .the minutes delay little .I set it many times and i notice next day it is delay few seconds and after days the minutes delayed. I wish to solve this problem ASAP. Regards

    Read the article

  • shorewall masquerading from tun0 to ppp0

    - by damir
    First interface is ppp0 (pptp vpn) Second inteface is tun0 (openvpn) Third interface eth0 (default gw interface) Openvpn is set to change default route on client for all packets to go through tun0 vpn, that part is working ok. I would like to make all packets from tun0 go to ppp0 and get out from that interface (MASQ) but somehow they always end up on eth0 (default gw interface) /etc/shorewall/masq ppp0 tun0 doesn't seem to work

    Read the article

  • Server 2008/Windows 7/Samba Unspecified error 80004005

    - by ancillary
    I have a Samba share on a LAN with 2008 PDC/DNS. Smb authenticates with AD and I have several Win7 Machines that can connect fine. I recently added a couple of new computers to the LAN which were imaged the same way (same software, etc.; different hardware so different drivers) as the other machines and they have the same policies set. I can not get the new machines to connect to the samba share no matter what. I am always met with either Unspecified Error 0x80004005 or Network Path not found. I've turned off the firewall; set LANMAN auth to respond to NTLM only/send LM & NTLM responses/use NTLM session security if negotiated in Local Sec Policy SEcurity Options; tried both ip and hostname to connect. SMB log shows that authentication succeeds; but then connection is immediately killed by the client. tcpdump shows nothing remarkable except that when trying to connect from the client via hostname there is an unknown packet type error: ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) Here's a couple of lines from that error: 11:18:37.964991 IP 001-client.domain.local.49372 > smb.domain.local.netbios-ssn: P 1670:2146(476) ack 201 win 255 NBT Session Packet: Unknown packet type 0xABData: (41 bytes) [000] AA 46 96 FA D5 99 33 75 0C C4 20 CE 26 42 F3 61 \252F\226\372\325\2313u \014\304 \316&B\363a [010] F0 8C FB 65 18 17 40 A5 DB 42 BB 94 37 53 92 EC \360\214\373e\030\027@\245 \333B\273\2247S\222\354 [020] 55 98 7F C4 AE 3D 6B 10 C4 U\230\177\304\256=k\020 \304 11:18:37.964998 IP smb.domain.local.netbios-ssn > 001-client.domain.local.49372: . ack 2146 win 100 Here's smb.conf just in case (though don't see how if other machines are working fine): [global] workgroup = MYDOMAIN realm = MYDOMAIN.LOCAL server string = domain|smb share interfaces = eth1 security = ADS password server = 192.168.1.3 log level = 2 log file = /var/log/samba/%m.log smb ports = 139 strict locking = no load printers = No local master = No domain master = No wins server = 192.168.1.3 wins support = Yes idmap uid = 500-10000000 idmap gid = 500-10000000 winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind use default domain = Yes [samba-share1] comment = SMB Share path = /home/share/smb/ valid users = @"MYDOMAIN+Domain Users" admin users = @"MYDOMAIN+Domain Admins" guest ok = no read only = No create mask = 0765 force directory mode = 0777 Any ideas what else I could try or look for? Or what might be the problem? Thanks.

    Read the article

  • Format Phone Numbers on Android

    - by gsharp
    Hi Is there a (hidden) setting that allows to set the phone number format on Android? I'm in swiss and we use the following format a -- 123 456 78 90 the acutally setting of the phone is b -- 123-456-7890 so what can i do to format string 'b' into 'a'. Thank for you help.

    Read the article

  • Setting up a SQL server outside the domain

    - by user41013
    Hi, im very new to this. I've set up an account "SQLBOX" thats on the a network, but not connected to the domain. I have installed an instance of SQL Server 2008 and am trying to connect to it from another machine on the network but am getting "Cannot connect to "SQLBOX"". From the "SQLBOX" i can connect to sqlservers on the domain, but not vice-versa. Any help would be grately appreciated. Sorry if the description isn't great. Thanks

    Read the article

< Previous Page | 841 842 843 844 845 846 847 848 849 850 851 852  | Next Page >