Search Results

Search found 5124 results on 205 pages for 'clean'.

Page 85/205 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • PC Speaker sounds when machine locks up.

    - by d.c
    What would cause my PC speaker to sound a low frequency continuous tone as my system locks up? Generally what will happen is I'll notice the application I'm using will stop responding but explorer will be partially responsive, then after a few more actions explorer stops responding, and the last click will cause the pc speaker to emit a low constant tone as the machine locks up completely. The only resolve at that point is to restart. Its not a thermal issue, I'm reading the cpu, and hdd temps with software and hardware monitors. AV and malware scans come up clean. I've swapped out my ram, reseated all my components. Used sfc with no results. chkdisk locks up at 3% and defragmenting does the same, but I can read the drive without trouble (I know this as I've done av/malware scans and I also backed everything up since this started happening) I'm mostly just interested to learn, if anyone knows, why the pc speaker would sound during the lock up. windows xp sp2

    Read the article

  • Will my RAID0 stay intact when I move it to a new computer?

    - by Jeremy H
    My primary drive is a 250GB WD SATA drive. So, I added 2x 500GB 7,200 RPM WD SATA drives into my Windows Vista box and created a 1TB RAID0. I then formatted the the primary drive and installed Windows 7. To my pleasant surprise when I booted into Windows 7 my RAID0 was still intact and I kept trotting along the same as I did before. Now I am replacing my motherboard, processor, and RAM and plan on formatting the primary 250GB drive again and using it to boot for a new clean install of Windows 7. My question is: if I move these two SATA drives which are setup for RAID0 into the new system, install Windows 7 again, will the RAID0 remain? Edit: Software RAID. I created it within Windows. The RAID0 does NOT contain the system boot partition.

    Read the article

  • Help me convert my gaming headset plugs (mic & stereo sound) to a single 2.5mm monaural plug

    - by Flotsam N. Jetsam
    I have a seldom used piece of computer hardware I'd like to connect a gaming headset to. The headset has two 3.5mm plugs (mic and sound) like this: The jack I need to plug into is a 2.5mm monaural (don't ask me why--I know it sounds goofy but it's for someone else who's very picky). I googled a few different ways but I could only find splitters such as this for going from 2 x 3.5mm to 1 3.5mm. If I could find one that could combine it properly to 1 3.5mm, I could then find a 3.5mm to 2.5mm adapter. I know I could probably vivisect and work something out, but I need it to be very clean. Any ideas?

    Read the article

  • Restore Picasa people tags

    - by Paul
    I have loaded Windows 7 to my laptop. Before doing this I backed up all my pictures using the Picasa backup utility. I then ran a restore on the clean Windows 7 install. I then installed Picasa 3.5 and none of the people tags showed up. I then went and deleted what I thought was the Picasa DB and then tried running the restore again. Now each folder shows up twice in Picasa but only once under the Windows Pictures folder. How do I get rid of the duplicates in Picasa and get my people tags back?

    Read the article

  • Windows 2003 SP1 terminal server printers Disappear after reboot - HP laserjet 4240

    - by Alex
    had working PCL6 laserjet 4240 driver. needed to downgrade to PCl5, tried but did not get clean install. tried again and it seemed to work (this is 2003 enterprise terminal server SP2) Have over 40 working laserjets (5, 4000, 4100 and 18 of the 4240) After normal nightly reboot the 18 4240 printers were 'gone'. Worked w/Microsoft who said bad HP driver issues - weird since they work on other terminal servers. downloaded latest version, etc. from HP site and can NOT get to work. As soon as I install, then do a Net Stop Spool and Net Start Spooler the printer is 'gone'. Current workaround is to use HP 4000 PCL5 drivers for all of these 4240 printers.

    Read the article

  • Port forwarding with DNAT and SNAT without touching other packets

    - by w00t
    I have a Linux gateway with iptables which does routing and port forwarding. I want the port forwarding to happen independent of the routing. To port forward, I add this to the nat table: iptables -t nat -A "$PRE" -p tcp -d $GW --dport $fromPort -j DNAT --to-destination $toHost:$toPort iptables -t nat -A "$POST" -p tcp -d $toHost --dport $toPort -j SNAT --to $SRC $PRE and POST are actually destination-specific chains that I jump to from the PREROUTING and POSTROUTING chains respectively so I can keep the iptables clean. $SRC is the IP address I'm SNATing to which is different from the gateway IP $GW. The problem with this setup is that regular routed packets that were not DNATed but happen to go to the same $toHost:$toPort combo will also be SNATed. I wish to avoid this. Any clever things I can do?

    Read the article

  • Can't access internet even though everything is working

    - by entity64
    A friend recently upgraded to a new cable internet connection. The modem connects to the router and various PCs and smartphones from her roommates connect to the router. They don't have any problem accessing the internet. She has Windows 8 and can't access any website (via wifi and ethernet). DNS (UDP) is working, DHCP set up everything correctly, Wifi is working, Trace routes and Pings (ICMP) go through with no problem at all. But neither Dropbox nor Skype nor Spotify nor any browser (all TCP) can access any website. The thing is though, she can connect through the university wifi and via a neighbors wifi. It's just her home connection. No firewalls are running and the computer is clean - no malware. How could it be that only her home connection won't work and others do?

    Read the article

  • Missing 16:10 resolutions with Nvidia drivers (Can't add resolutions)

    - by Wuinny
    Hello, I have a laptop with a Nvidia 9650M GT and used the drivers that Seven brought me. It works fine but Metro 2033 tells me that i have to upgrade my drivers to play the game. So i did it. But since i did a clean install of the new Nvidia drivers, i just have 1440*900 or 4:3 resolutions. I usually played with 1280*800 or 1184*740 (for performance issue) With the "old" drivers i was able to create custom resolution (1184*740) in Nvidia control panel but now when i try it tells me that "my monitor cannot support this resolution". When i insist, it works but soon as i shut down my computer i have to recreate it.. Do anyone have a fix ? Thank you

    Read the article

  • What could cause a file system to spontaneously unmount or become invalid for a short time?

    - by Ichorus
    We've got DB2 LUW running on a RHEL box. We had a crash of DB2 and IBM came back and said that a file that DB2 was trying to access (through open64()) unmounted or became invalid. We have done nothing but restart the database and things seem to be running fine. Also, the file in question looks perfectly normal now: $ cd /db/log/TEAMS/tmsinst/NODE0000/TEAMS/T0000000/ $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT $ file C0000000.CAT C0000000.CAT: data $ lsattr C0000000.CAT ------------- C0000000.CAT $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT With those facts in hand (please correct me if I am mis-interpreting the data at hand) what could cause a file system to 'spontaneously unmount or become invalid for a short time'? What should my next step be? This is on Dell hardware and we ran their diagnostic tools against the hardware and it came back clean.

    Read the article

  • FreeBSD 9 (amd64) reboot/shutdown process is very slow

    - by nbari
    I have a Dell Poweredge 2900 III with FreeBSD 9 (amd64), the server uses mfi wich handles a raid10, I had to reboot the server, but notice that either when rebooting or shutting down the server, something is going wrong, besides taking to much time to reboot/shutdown, after rebooting I notice that that some ldap instances within some jails could'nt start and this was because the database was corrupted. This make me think that probably something was wrong with the disks or mfi card, but checking the disk array / logs everything seems to be working fine. My set up is something like this: Host server has the minimum base of FreeBSD 9 amd64, within I create some jails, the ones contain services like mysql, email, and some others ldap. With FreeBSD 7 and 8 I didn't notice this behavior but with FreeBSD 9 something is not working well. I did a clean installation of FreeBSD 9 and root filesystem is using ZFS. Attached is an image hoping some one can give me a hint of what to check or any kind of advice. reboot capture screen image

    Read the article

  • Two users using the same same user profile while not in a domain.

    - by Scott Chamberlain
    I have a windows server 2003 acting as a terminal server, this computer is not a member of any domain. We demo our product on the server by creating a user account. The person logs in uses the demo for a few weeks and when they are done we delete the user account. However every time we do this it creates a new folder in C:\Documents and Settings\. I know with domains you can have many users point at one profile and make it read only so all changes are dumped afterwords, but is there a way to do that when the machine is not on a domain? I would really like it if I didn't have to remote in and clean up the folders every time.

    Read the article

  • Where in the registry are application registered hotkeys stored?

    - by Stuart Allen
    I need to find in the registry the key that is holding the hotkey CTRL-ALT-SHIFT-E. This is normally a keyboard shortcut in Photoshop, but I installed some program that did a global override of this sequence. I have uninstalled that program, but it did not clean up after itself. So, where can I find this in the registry, I just want to delete this key so the global override won't affect Photoshop anymore. I've google'd the crap out of this, there are various program that claim to assist, but none of them work.

    Read the article

  • What does the term 'overinstallation' mean?

    - by Kent Pawar
    I came across this term here: "11882875 -- Essbase Server does not start after an overinstallation." I know that a clean install is a software installation in which any previous version is removed. Googling 'overinstallation' turned up nothing, and I don't like to just assume it simply means 're-install'. UPDATE: So my understanding now is - the term "re-install" can be a bit ambiguous as it could either signify an installation after an uninstallation or otherwise. On the other hand the term "over-installation" specifically talks about installing something over an existing installation, that involved no uninstallations.

    Read the article

  • How to tell start-stop-daemon to update $HOME and $USER accordingly to --chuid parameter

    - by iElectric
    I'm trying to run a service that uses $HOME and $USER environment variables. I could set them in service itself, but that would only be a temporary solution. Let's say I have a script test.sh with following content: echo $USER And I run it with start-stop-daemon to see my results: $ start-stop-daemon --start --exec `pwd`/test.sh --user guest --group guest --chuid -guest root Seems like it does not update environment, maybe that should be reported as a bug? I have found a nasty hacky solution, which only works (for unknown reason) on my this simple use case: $ start-stop-daemon --exec /usr/bin/sudo --start -- -u guest -i 'echo $USER' guest I'm sure someone else stumbled upon this, I'm interested in clean solution. $ start-stop-daemon --version start-stop-daemon 1.13.11+gentoo

    Read the article

  • Is there a chroot build script somewhere?

    - by Nils
    I am about to develop a little script to gather information for a chroot-jail. In my case this looks (at the first glance) pretty simple: The application has a clean rpm-install and did install almost all files into a sub-directory of /opt. My idea is: Do a find of all binaries Check their library-dependencies Record the results into a list Do a rsync of that list into the chroot-target-directory before startup of the application Now I wonder - ist there any script around that already does such a job (perl/bash/python)? So far I found only specialized solutions for single applications (like sftp-chroot). Update I see three close-votes for the reason "off topic". This is a question that arose because I have to install that ancient piece of software on a server at work. So if you still feel this is off-topic - leave a comment...

    Read the article

  • IIS + PHP Data Objects + MS SQL?

    - by jldugger
    We're migrating an LAOP server to Win 2k8 IIS7 MSSQL and PHP (WIMP?) at work, and I'm using the opportunity to clean up the PHP. Currently it doesn't use PDO, and I'd like to rewrite the PHP to use that instead. Challenge is, I don't know much about MSSQL and PHP deployment on Windows. The official MSSQL PDO object is experimental / depreicated and recommends PDO-ODBC. Microsoft just announced a driver supporting PDO. Is there no other PDO driver? How does SQLSRV contrast with PDO-ODBC?

    Read the article

  • How can I find the names of AD Group policies that a user/pc is using?

    - by Russ
    I am having trouble locating some settings in group policy so I can make changes due to the convoluted nature of our policies. What I would like to be able to do is go to a specific PC and see what group policies are being applied, so I can focus on those policies. My goal would be to clean up the GP's a bit, while allowing me to "walk the tree" to see what people have implemented and what is worthless. Thanks. EDIT: In this specific case, I am looking to find which GP maped drives are configured in. (User Configuration -- Preferences -- Windows Settings -- Drive Maps)

    Read the article

  • Taking two actions in monit

    - by Oddthinking
    My monit script works to detect an outage with a process and inform me when the rule is: IF DOES NOT EXIST THEN ALERT My monit script works to detect an outage and automatically fix it when the rule is: IF DOES NOT EXIST THEN START But, what I want it to do is inform me AND fix it. Two rules in a row seems to make it ignore all but the last: IF DOES NOT EXIST THEN ALERT IF DOES NOT EXIST THEN START # No alert given. I could use a custom script that does both, and IF DOES NOT EXIST THEN EXEC "my_handwritten_script" but I was trying to move away from a mess of hand-written scripts towards a clean Monit configuration. Can I configure Monit to take two actions?

    Read the article

  • Belkin Wireless G router not working on Windows 7

    - by coore
    I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

    Read the article

  • Windows 2008 R2 Not resolving IP's or domains

    - by InsaneAR
    I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

    Read the article

  • What's the easiest way to delete Vim swapfiles I've already recovered from?

    - by Peeja
    Sometimes Vim crashes and leaves me a swapfile. That's awesome. Then I open the file I was editing and Vim asks me if I want to recover. I do, thanks. When it's done, Vim tells me, You may want to delete the .swp file now. Why, yes, I do. How do I do that? I figured it would just start using the old swapfile as a swapfile again and clean it up when I quit, but that's not true. It makes a new one, cleans that one up, and when I open the file again it prompts me again to recover from the first one. Surely I'm missing something.

    Read the article

  • A good free software for freeing up RAM Memory in Windows 7(64bit)

    - by Flavius Frantz
    I am looking for a good windows 7 software to free up RAM memory on my PC... i tried some ones I found on google but they were bad stuff... with viruses, spamware etc... i want a free clean professional software, if you don't know a good one thats free, please recommend a payed version. Also other tips/software to speed up my pc(on win7- 64bit) and such utilities. Also software to measure temperature would be great... If you can make a "must have" list of such software... Thank you I am a graphic designer, usually using this stack exchange for graphic design questions, now I realised there is this superuser one... nice :) [I usually have a lot of running programs, such as Photoshop, Flash, Illustrator, InDesign, running at the same time... with only 4GB of RAM memmory.. any tips to improve my PC perfomance would be great... I have a Asus K50IP Notebook]

    Read the article

  • Ubuntu Studio 10.4 boots to terminal mode only

    - by Don
    I did clean install from ISO DVD. It boots only to command line asking for login. After I login I enter STARTX and desktop appears and some of the studd actually works, but there are a lot of problems: there is no way to reboot or shut down except to stopx/logoff and enter shutdown sound system doesn't respond pulse audio volume control gives "connection failed, connection refused" DVD drives not available GDebi Package installer is grayed out and so I can't use it (but synaptic package manager works OK) Software Center won't start when clicked -- it just stops trying DBus cant run because it says /usr/local/var/run/dbus/system_bus_socket file not found (also /var/run/dbus/system_bus_socket file not found) There's just a lot of things wrong and I can't help but think something is missing or was mis-coded in the distro so that there are typos in some script somewhere. If anyone can tell me where to begin to untangle this mess I'd appreciate it, but I think it all begins when it can't start the GUI automatically and I need to enter STARTX.

    Read the article

  • What's the best way to be able to reimage windows computers?

    - by mos
    I've got a low-end machine for testing our software. It needs to be tested under various versions of Windows, so I was planning installing each one on its own partition. Then I realized that after testing our software, I'd want to roll back to the previous, clean state. I don't want to use any virtualization software because it tends to interfere with the workings of our app. That said, what's the best way to achieve my goal? Norton Ghost? Edit: I work for a pretty monstrously huge organization. Money is no object here (and sometimes, if the wrong people get wind of it, "open source" software is bad).

    Read the article

  • How to install Windows on a laptop with no CDROM drive?

    - by Jason Kester
    I have an old Thinkpad X60 that I'd like to wipe clean and rebuild. Seeing as this machine doesn't have an optical drive, what's the easiest way of installing Windows XP? I have an external USB hard drive available. Would it be possible to run the install from that instead? Otherwise, what options do I have? Edit: assuming we're using a USB mass storage device... Is there a BIOS setting that I would need to change, or will it configure itself automatically? Would the USB drive need to be configured in any special manner, or would simply having a copy of the Windows CD files in a directory there be sufficient? Since the first couple answers that came in were basically "yes", I guess I didn't phrase my question correctly. I'm asking for detailed instructions on how to do this, not just a sanity check that I'm headed in the right direction. Thanks!

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >