Search Results

Search found 102773 results on 4111 pages for 'mcitp sql server 2008'.

Page 85/4111 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • Server 2008, 2 NICs, 2 fixed IPs - big delays using internet

    - by user46055
    Hi geniuses I have an all in one Windows 2008 server, configured with AD/DHCP/DNS/RRAS - all set up with wizards and no specific tweaking. The server has 2 network adapters : one of which ("MyWAN") is plugged into our office's internet connection, the other ("MyLAN") is plugged into a local switch, which is also where all our desktops are connected. So this one server is doing everything. When first set up, MyLAN had a fixed IP of 192.168.2.1 and served the desktops with DHCP scope 192.168.2.50-99. It also told them to use 192.168.2.1 as DNS and gateway. MyWAN was setup to take its IP etc from DHCP, being handled by the building's router and ADSL modem etc. All desktops were setup to use DHCP. This all worked perfectly fine, until I recently changed MyWAN to have a static IP (I wanted to access it from home, and needed to give it a static IP to port map in the building's router). Things still work, but there is now a long delay when accessing the internet. The actual speed is as before when downloading, but there is a pause of 3-6 secs when connecting to new hosts (for example if I browse to slashdot from either a desktop or the server itself, it'll hang on connecting to slashdot.org, hang again on connecting to *.fsdn, *.google-analytics.com and all the other hosts referenced from the main page). If I ping slashdot.org from the server, I get the following : Pinging slashdot.org [216.34.181.45] with 32 bytes of data: Reply from 192.168.2.1: Destination host unreachable. Reply from 216.34.181.45: bytes=32 time=99ms TTL=239 Reply from 216.34.181.45: bytes=32 time=100ms TTL=239 Reply from 216.34.181.45: bytes=32 time=101ms TTL=239 Pinging anywhere external always seems to hit 192.168.2.1 first, which doesn't seem right. Trying tracert from the server gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 MYSERVER01.intranet [192.168.2.1] reports: Destination host unreachable Trying tracert from a desktop gives the following : Tracing route to slashdot.org [216.34.181.45] over a maximum of 30 hops: 1 <1 ms * <1 ms MYSERVER [192.168.2.1] 2 * * * Request timed out. 3 6 ms 6 ms 6 ms dsl-gw1.ge.mer.uk.webtapestry.net [217.151.111.17] 4 38 ms 239 ms 251 ms gw-router.ge.mer.uk.webtapestry.net [217.151.111.13] ...and then all is fine after that. I think that DNS is working fine because the domain names are getting translated to correct IPs immediately. DHCP seems to be okay? So perhaps it's something up with my RRAS setup - although I can't see any option during the setup wizard which I would have filled in differently. I've also tried changing the binding order of the two network connections, to prioritise MyWAN, but that doesn't seem to have done anything. Any idea what's up? Many thanks - Rob

    Read the article

  • Windows 2008 Routing and Remote access server - access to the internet

    - by Ian
    I have a windows 2008 r2 remote access server set up and running. The remote access works fine. My problem is that the remote access server itself doesn't have access to the internet. The box has two interfaces, an internal and an external. Inbound connections come in on the external interface and RRAS responds. All wall and nice. I want to be able to use windows update, browse, etc from this box but can't as the outbound traffic just gets blocked. I've tried going into the RRAS mmc tool and opening the interface properties, under which there are two buttons for inbound and outbound filters. There I tried adding ports 80 and 443, but this doesn't work completely. I can see the connection initiating (Syn goes out) but the session never establishes itself. Anyone done this or got any suggestions?

    Read the article

  • How to get Windows Server 2008 VM to use multiple cores

    - by David Fraser
    I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

    Read the article

  • How to setup a reliable SMTP server on Windows Server 2008 R2

    - by everwicked
    I know there are SMTP services out there which you can pay to send e-mails with but surely it's not that difficult to set up one of your own. How can I set up an SMTP server on Windows Server 2008 R2 that is: - Secure; only authorized users/hostnames/etc can send mail - Reliable; e-mails don't get lost - Not treated as spam; when e-mails are received from say gmail/outlook/hotmail they don't go straight to junk ** ** I understand this depends both on the server+e-mail headers AND e-mail content - I'm looking to safeguard the server part. Thanks!

    Read the article

  • Server 2008 R2 - Boot disk RAID 1 - migrate to larger disk

    - by William Hooper
    My group inherited several 2008 R2 servers with single 70GB RAID 1 boot/system disks. No other disks in the servers. We need larger boot / system disk. Plan is : to replace one disk with new 500 GB drive wait for resync replace other smaller disk with 2nd 500 GB drive wait for resysnc Now I should have 500 GB RAID 1 with original 70 GB partition Then I would like to extend the 70 GB partition to 200 GB and add D: drive partition with remaining 300 GB Can the above be done using Windows Disk Management and / or Windows DiskPart ?

    Read the article

  • SQL Server Remote Connections

    - by Barry
    Hi, I am at my wits end with trying to access a remote SQL Server 2008 R2 Express instance. Here are the following that I have tried. 1) I enabled remote connections in the instance properties. 2) I enabled sql server and windows authentication mode and created an account to log in using sql server authentication. 3) I started the SQL Server Browser service 4) I forwarded ports 1433 and 1434 on the router to the IP address of the machine hosting SQL Server. 5) I turned off firewalls on both the Machine running the instance and the router. 6) http://www.yougetsignal.com/tools/open-ports/ I used this to check whether or not both ports were open and it says that they are closed. I have the SQL Server Express instance running and the browser running. I have configured it to allow remote connections yet, it tells me they are both closed. I'm pretty confused at this stage. On the client Machine I am trying to connect using the following format machineip\SQLEXPRESS with SQL Server Management Studio Express. Thanks in advance

    Read the article

  • How to fix Windows 2008 R2 BOOTMGR is missing

    - by cyberkiwi
    BOOTMGR IS MISSING PRESS CTRL+ALT+DEL TO RESTART Note: This is a VM on VMWare ESX server, but that should not matter I put in the 2008 R2 x64 install dvd and can get to recovery, but it lists no Operating Systems. Clicking on Next brings me to +=========================== System Recovery Options +=========================== Choose a recovery tool Operating system: Unknown or (Unknown) Local Disk ..... Command Prompt I start the command prompt, go to C:\ and perform a dir /a Apart from files I put there myself, these are showing $Recycle.Bin Documents and Settings [C:\Users] Program Files Program Files (x86) ProgramData Recovery System Volume Information Temp Users Windows Where to go next? Is it like the NTLDR problem with Windows 2003 where I can just drop a file in there and it will be hunky dory again?

    Read the article

  • Can someone correct me about Windows 2008 DFS implementation

    - by cwheeler33
    I have 2 two Windows 2003 file servers using DoubleTake at the moment. They are in an 2003 AD domain. And each server has it's own disk set. It is time to replace the servers... I want to use Windows 2008 64bit Ent. I was thinking of using DFS-R to replace DoubleTake. The part I'm not sure about is clustering. Do I need to have shared storage if each server has a copy of the data? I want to have the data available to the same share name, so maybe I don't fully understand how DFS is set up. I currently have about 6TB of data. I expect to grow by 3TB a year on these file servers. Any resources/books that could teach me would be good to know as well.

    Read the article

  • Windows Server 2008: Terminal Services

    - by JohnyD
    I have a Dell R710 with 72GB of memory running Hyper-V. Within Hyper-V I have a Windows 2008 (32-bit) VM running Terminal Services. How do I allocate memory so that any user who connects to this Terminal Server (from their thin-client) is allocated 2GB (or whatever amount I choose) of memory? Currently I have provisioned the TS with 2GB of memory but it seems that this is shared among all that connect. Please let me know if there is further information I can provide. Thank you.

    Read the article

  • Forcing users to change password on first login - Windows Server 2008 R2 Remote Desktop Services

    - by George Durzi
    I'm setting up a demo lab environment in which each demo lab user is assigned 4 accounts to use in the lab. Users access the lab via Remote Desktop to the "client" machine in the lab - exposed at demolab.mydomain.com. The Client machine is a Windows 2008 Server R2 Enterprise Edition server The Remote Desktop Services role is configured on this server Remote Connection settings are configured to allow users to connect with any version of the Remote Desktop Client All accounts are members of the local Administrators and Remote Desktop Users groups All accounts are configured to be forced to change the default password after first login The user is instructed to remote into the lab with an account designated as their main account, and establish 3 more remote desktop sessions within the lab using their 3 other assigned demo lab accounts. When establishing the initial remote desktop connection to the lab using their main account, the user sees the change password dialog as expected. However, after logging in and trying to establish remote desktop connections to the server with their three other accounts, they are prompted that they need to change the password after logging in but can't continue with the login process - they don't see the expected change password experience. After logging in with a primary accounts, it doesn't make a difference if I try establishing a Remote Desktop connection to the environment using the name of the server, e.g. Client, or demolab.mydomain.com. I experimented with changing the settings for Remote Connections to require NLA but that didn't make a different. Appreciate any tips. Thanks

    Read the article

  • What is the best way to run ClamAV on Windows Server 2008 R2

    - by gabbsmo
    I'm hosting a Wordpress-site on Windows Server 2008 RS and want to scan all files that are uploaded by users for viruses using this plugin http://wordpress.org/extend/plugins/upload-scanner/. I'm on a really tight budget (no profit) so ClamAV seem like a good choice. What is the best way to run ClamAV under these circumstances? I'm concidering the following options: Just running the raw windows build from http://sourceforge.net/projects/clamav/ an setup definition updates with task scheduler. Any way to automate updates of the scanner (binaries)? Using a "distro" like ClamWin or Immunet (advertised on clamav.net). Any suggestions are welcome.

    Read the article

  • Changing Administrator password on a Windows 2008 web server

    - by Nick
    I've just taken over the administration of a Windows 2008 web server from a previous employee on a temporary basis. I need to change the Admin password as soon as I can but I've noticed that quite a few of the services also run under this account. So: Is there a quick way to find out which services will be affected by me changing the password or is it a question of going down the list? It doesn't seem right to me that the Admin account is used in this manner; should I create a different account for these services, or is using the Admin a/c standard practice? I realize everyone's servers / networks are set up differently, but are there any other items I should be aware of when changing the Admin password? Thanks

    Read the article

  • Moving mails from SBS 2008 to SBS 2011

    - by starchx
    we are going to upgrade server from SBS 2008 to a new hardware server with SBS 2011. Due to non-experience in Server Migration (eg, answer file), we have decided to choose Clean Install. We have 12 users so that's not too bad. The most challenge problem is to move over all the emails for each user, some user have 5GB inbox. The one method I know is to login to each user account and export the emails to PST file using Outlook 2007. Then connect to new SBS 2011 and import the PST into new inbox. Do we have any other better/quicker ways? Thanks

    Read the article

  • How to Mirror or Clone a Spanned Volume in Windows 2008

    - by Matt
    I have a spanned volume (3x6+ TB disks spanned to one 20+ TB volume) that I need to mirror or clone to a new 20+ TB (unspanned) volume. Once mirrored or cloned I'm going to destroy the original volume and reuse the storage elsewhere. Windows 2008 will not allow me to mirror it because the original is a spanned volume. I cannot simply copy the data, because there are sparse files on the volume. So the OS thinks there is 150+ TB used on the disk when there really is only around 18TB used physically. When I try to use the copy command it won't run because it thinks the destination volume needs to be 150+ TB to hold it all. A conundrum, but I figure someone here has the answer. Thanks, Matt

    Read the article

  • Password Expired Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • Windows Server 2008 R2 stuck at System Recovery Options

    - by Magnus
    One of my Windows Server 2008 R2 server has started to go into System Recovery Options at reboot. I have tried to let it go through a System Image Recovery, which it says completes successfully. But after reboot it again wants to do a system recovery. Safe mode doesn't work; it still wants to do a system recovery. Putting in the install DVD trying to do a repair actually brings up the very same System Revoery dialog again. Nothing has changed configuration wise. Any ideas?

    Read the article

  • Password Expired on Server 2008 R2

    - by Shaharyar
    Hello everybody, We're facing some trouble with our Windows Server 2008 R2 installation. The passwords expired and we're prompted to change the password. After changing it, we get following error message: Configuration Information could no be read from the domain controller, either because the machine is unavailable, or access has been denied. But we aren't even using a domain controller. So we tried running the server in Safe Mode where we get following message after changing the password: An attempt was made to logon, but the network logon service was not started. Are there any other things I could try? All help is more than appreciated!

    Read the article

  • Windows Server 2008 - inexplicable system time jumps/glitches/inaccuracies

    - by Nathan Ridley
    I'm running a production web server on Windows Server 2008. On this server I have a database which logs certain user actions, but every now and again I inexplicably get database entries which, according to the record ID and the records immediately before and after, have the wrong time logged against them (7 days+ too old). For example, record ID 1001 will be for Dec 7, 11pm, 1002 will be for Dec 7, 11:01pm, then 1003 will be for Nov 28, 1:38am, then the next will be back on track again. The problem seems to occur in random records (or 2-3 records in a row) and crops up once every few days. This is absolutely baffling because there is only one place in the application that assigns this date/time value and it's simply the system UTC date. I have been synchronizing the system time to time-a.nist.gov (which I read in another article was a bit more reliable than the default time.windows.com) and it seems to occasionally get out of time anyway (3-4 minutes), but I'm speculating that occasionally the time server has a temporary glitch where the date changes to a drastically wrong value for a short space of time, then changes back. Either that, or the motherboard clock battery is screwed and the reason the time momentarily changes is that the motherboard loses the time and then the time synchronization puts it back again. Could either of my suspicions be right? Should I turn off time synchronization for a production server? Assigning dates to an event log where the dates are up to 2 weeks prior to the actual date is a severe problem I can't have when the next version of my application is released. Any suggestions or advice would be appreciated.

    Read the article

  • Windows 2008 additional disk going offline with reboots on Amazon EC2

    - by Ernest Mueller
    OK, so I took the stock Windows 2008 64-bit Amazon AMI and wanted to add a D: drive for page file space and crash dumps. I launched the instance with a second EBS volume attached as xvdf and went into Disk Management set it online, and added the page file and crash dump settings and all that works. But when I reboot, the box comes back up with that second drive as "Offline." How do I get that disk to automatically come online on reboot (or most notably, when I turn this into an AMI and launch more instances off it - I've tried that too and same deal with the D:).

    Read the article

  • Setting up Kerberos SSO in Windows 2008 network

    - by Arturs Licis
    We recently introduced Kerberos (SPNEGO) Single Sign-on in our web-portal, and tested it on a Windows network with Windows 2003 domain controller. Now, trying to test it on Windows 2008 R2 controlled network, SSO just doesn't work due to defective tokens. Up to the moment I was pretty sure that there's something wrong about environment and that were NTLM tokens. We double checked IE settings etc, but nothing helped. Then we checked the following settings for both users (logged on a client test-machine, and the one used as a Service Principal): This account supports Kerberos AES 128 bit encryption. This account supports Kerberos AES 256 bit encryption. .. and error message changed to ' GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256CTS mode with HMAC SHA1-96 is not supported/enabled) It makes me think that Internet Explorer receives Kerberos tokens at all times, and there's just some configuration missing, or it was ktpass.exe to be incorrectly executed. Here's how ktpass.exe was invoked: C:ktpass /out portal1.keytab /mapuser USER /princ HTTP/[email protected] /pass *

    Read the article

  • Windows 2008 VPS always crashes when out of disk space

    - by Pickels
    Hello, I am renting a Windows server 2008 dc SP2 VPS for hosting my Asp.Net projects. Now for the second time this month my VPS ran out of disk space. The first time it was a log file that got to big and yesterday it was my mistake for uploading a website without noticing the lack of space on my VPS. Now the side effect this has is that my VPS corrupts some files when trying to write them. Last time it was Plesk that stopped working yesterday it was IIS. So I was wondering is this normal behavior? I called my service provider to ask if they could restore a back-up and to ask if this is normal and they ensured me it was. I am not trying to blame them and I know it's mostly my fault for not monitoring my VPS better or for not setting better defaults.

    Read the article

  • Windows Server 2008: Limit UDP/TCP packets per IP or ban

    - by WBAR
    How I can limit UDP/TCP packets per IP send to my host (or better PORT) per second or minute ? Would be nice to ban that IP for 12/24 hours or even for ever. I got Windows Server 2008 and I'm very poor in Windows administration but quite good in Linux. EDIT: By basic problem is that They sending a lot of rubbish UPD and TCP packets.. TCP packets without SYNCH, fragmented UDP packets so my servers stop responding.. So I need to cut off users (IPs) sending more than X packets per second. I need solution witch provides me, somehow, configurable: X packets of certain type (UDP, TCP or both - lets say parameter named Z ) are allowed to be received by IP on Y port, otherwise this packet should be DROPPED. My virtual hosts are hosted by VirtualBox and I'm able to forward all incoming packets certain type and certain port to the specific Virtual Host, but I need to DROP them before my VirtualBox receive them.

    Read the article

  • Concerns about a Dedicated (Windows Server 2008) + DDoS

    - by TheKillerDev
    I am have today a dedicated server with these specs: Intel Core i5 750, 2x120GB (ssd + raid), Windows Server 2008 Web, 200Mbps Network, 24 Gb DD3 And I would like to know what are the best thing I can do to prevent a DDoS Attack, since I know this will be a real threat by the importance of the files that will be archived in it. Today I have apache listening port 80 and RDC listening port 3389. But the security is beeing made only by Windows Firewall. So, any thoughts on what would be good to prevent from DDoS attacks?

    Read the article

  • Cannot install new certificate in IIS 7 on Windows Server 2008 R2

    - by Alex B.
    We are trying to renew our existing web site certificate on our IIS 7 site under Windows Server 2008 R2, but we continue to get the "Access is denied" error that others have posted. However, when we have gone to implement the common fix of making sure the Administrator group has full access to all folders and subfolders on the C:\ProgramData\Microsoft\Crypto\RSA folder, we get an "Access is Denied" error on changing those permissions. Yes, we are logged in as Administrator user - it just seems to not allow us to modify the group permissions to this folder. Help! We need to renew our certificate before March 2011!

    Read the article

  • Windows 2008 Server Firewall blocks from printing in other subnet

    - by xenolf
    Greetings, i have a windows 2008 server with activated firewall in the 192.168.0.xx subnet. From there i want to print on an printer which is located in the 192.168.10.xx subnet. Now when i try to print with the firewall on, nothing happens... when i turn the firewall off it prints flawlessly. Now i messed around with the windows firewall for about 4 hours straight and i cant seem to find a rule which lets me print. Even when i set the firewall to let everything through im unable to print. Has anyone encountered the same or a similar problem and has a solution for this issue? Thanks in advance xenolf

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >