Search Results

Search found 34195 results on 1368 pages for 'try'.

Page 85/1368 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Radeon HD 5770 - DisplayPort Problem

  - by Nick Schmit

  I am trying to set up 3 monitors with the Radeon HD 5770 I recieved a few days ago. I have read that I can use 2 DVI ports and an active DisplayPort adapter for a third DVI monitor. I have purchased this adapter: http://www.accellcables.com/products/DisplayPort/DP/dp_dvid.htm I have the two normal DVI monitors working, but when I try to extend the display to the third, I get a message saying the system has detected a problem with the connection through the display port which may limit resolution/refresh rate. I know that all the cables are fine, I have replaced the adapter, the monitors all work, I have tried different monitors through the adapter, and even nothing but the adapter, but I cannot get any monitor to work using it. I am trying to use 2 Dell monitors and an Acer. Have I overlooked something? Is there a compatibiliy issue I missed? Any suggestions as to what I could try? Thanks in advance.

  Read the article

• Running Sonatype Nexus in Tomcat 7.0, Tomcat blocking PUT requests

  - by gdm

  I was previously running Nexus 1.8 on OSX and uploading jars for releases without any issues. The OSX box died, so I moved to a FreeBSD server. Since Nexus doesn't have binaries for FreeBSD, I decided to run it in my Tomcat container. Now, I have set up Nexus 1.9 in Tomcat 7.0 on FreeBSD. Everything is working well, except I can't upload jars to my release or snapshot repositories. If I try via Hudson, I get a 401 error (and no further details). If I try manually via curl, I get an error message back from Tomcat: "This request requires HTTP authentication.". Why is Tomcat giving this error, and how do I stop it? If I look in the Nexus logs I can see that the PUT request doesn't even reach Nexus, Tomcat is intercepting it.

  Read the article

• I can't do a Remote Assistance session to a Windows XP box from Windows 7.

  - by superkinhluan

  My Mom's computer is running Windows XP, and my desktop running Windows 7. She's having some technical issue, so I want to do a Remote Assistance session to her machine. However, no matter what I've tried, the Remote Assistance program doesn't connect successfully. I've verified that the Windows Firewall (on both my and her machines) is configured properly to allow Remote Assistance program to go through. What's interesting is that I have the same problem when I try to do Remote Assistance from my desktop to my laptop, which is also running Windows XP. However, when I try to connect to my girlfriend's machine, which is runninng Windows 7 this time, the connection is successful. So in the end, I guess there must be some incompability between Windows 7 and Windows XP. Does anyone experience the same issue? How did you resolve it?

  Read the article

• Error when trying to access Shared files from iMac via smb

  - by SatheeshJM

  I used to access all my Windows XP shared files on my Mac using Finder -- Window -- Connect to server. Now all of a sudden, an error crops up when I try to connect. I get the error "There was a problem connecting to the server "192.168.1.*" The server may not exist or it is unavailable at this time. Check the server name or IP address, check your internet connection and then try again. How can I remove this error and access my shared files from my Mac? P.S my network connections is fine.

  Read the article

• OneNote can't connect to SkyDrive in Windows 8.1

  - by Greg

  Since I installed windows 8.1 I can't open my OneNote notebooks stored on skydrive with the 2013 Office OneNote app. When I click in the office app to open from skydrive it gives back: "We can't get your notebooks right now. Please try again later." I can open them without trouble in the modern UI onenote app, but I can't open password protected pages there. Also if I try to open it from a browser the error message follows: "We couldn't open that location. It might not exist or you might not have permission to open it." Neither can I create new notebooks on skydrive with the office app. "...The specified location is not available. -You do not have permissions to modify the specified location..." Can it be fixed somehow? Or can I at least save a notebook to my hard drive without opening it in office? The backup file got deleted with the win 8.1 installation.

  Read the article

• how insecure is my short password really?

  - by rika-uehara

  Using systems like TrueCrypt, when I have to define a new password I am often informed that using a short password is insecure and "very easy" to break by brute-force. I always use passwords of 8 characters in length, which are not based on dictionary words, which consists of characters from the set A-Z, a-z, 0-9 I.e. I use password like sDvE98f1 How easy is it to crack such a password by brute-force? I.e. how fast. I know it heavily depends on the hardware but maybe someone could give me an estimate how long it would take to do this on a dual core with 2GHZ or whatever to have a frame of reference for the hardware. To briute-force attack such a password one needs not only to cycle through all combinations but also try to de-crypt with each guessed password which also needs some time. Also, is there some software to brute-force hack truecrypt because I want to try to brute-force crack my own passsword to see how long it takes if it is really that "very easy".

  Read the article

• Missing dependency when trying to update

  - by ant2009

  Hello, Fedora 12 2.6.32.9-67.fc12.i686 I have tried doing the recommended as its saids at the bottom. However, that didn't work. So I have to yum upgrade --skip-broken Does anyone know how to solve this problem? Many thanks nss-3.12.6-1.2.fc12.i686 from updates has depsolving problems --> Missing Dependency: nspr >= 4.8.4 is needed by package nss-3.12.6-1.2.fc12.i686 (updates) nss-3.12.6-1.2.fc12.i686 from updates has depsolving problems --> Missing Dependency: nss-util = 3.12.6 is needed by package nss-3.12.6-1.2.fc12.i686 (updates) Error: Missing Dependency: nspr >= 4.8.4 is needed by package nss-3.12.6-1.2.fc12.i686 (updates) Error: Missing Dependency: nss-util = 3.12.6 is needed by package nss-3.12.6-1.2.fc12.i686 (updates) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest

  Read the article

• Cannot copy files from external USB HDD to computer

  - by Thomas Versteeg

  Hello I have a HDD disk connected with a USB converter to my computer. It consists of two partitions, the first one is mounted automatically and I can grab all the files from it, but the second one I have to mount manually as a root in the command line, if I try to open it with nautilus it gives an error. The drive where the problem is is drive sdb1, sdb2 has the same settings but works fine. I am using Debian Wheezy. This is the fstab: /dev/sdb1 /media/usb0 auto defaults,gid=disk,umask=0777 0 0 /dev/sdb2 /media/usb1 auto defaults,gid=disk,umask=0777 0 0 And when I try to copy the files with this command (as root) cp -vr /media/usb0/* /home/user/Videos/ I get these types of errors: cp: reading `/media/usb0/.lang/file.ext': Permission denied cp: failed to extend `/home/user/Videos/.lang/file.ext': Permission denied How can I at least copy the files to my main HDD? I don't need to adjust them I only need to copy them!

  Read the article

• I can access \\server via explorer but a program wont

  - by Michael Savage

  From ServerA I can access \\ServerB\Telephony\Files\abcdefgh.pdf using windows explorer. From the same ServerA when I try to access the same file on ServerB using a program (a program that imports files from csv file) I get "File Not Found" error. On \\ServerB\Telephony\ the Share is on and I added the service account that I used to log in to ServerA. I am clueless. Please suggest. (oh, it's a Windows 2008 R2 Server) (btw, I did try IP Address, FQDN but works with Explorer but CVS Importer wont read the path. At one time, I did get Access Denied but I dont get access denied anymore after adding the service account to the share. firewalls are off on the servers) Update: I go to My Computer Network I see many servers but ServerB is not in the list..

  Read the article

• Exchange can't send emails with attachments

  - by Jack

  No one in our organization can send emails with attachments. Emails without attachments go through fine, but if an attachment is included, an error appears in the Server Failures folder under Sync Issues. The error is "The following message had an error and synchronization of it was skipped (0xc0090081)". We are using Symantec Mail Security, which we shut down to try to troubleshoot the problem, and now that fails to load. Any ideas as to what to check? I'm sorry I don't have more complete information, but I'm helping someone try to figure this out. I'm not the admin myself. Thanks.

  Read the article

• VMWare OVA file

  - by Matteo Mosca

  I've received an .OVA file and I need to be aple to open/parse it. When I try to open it with VMware player, I get the following error: "Failed to open virtual machine: Failed to query source for information." When I try to open it with the Converter standalone client I get: "Unable to parse the OVF file" The extension can be OVF or OVA so I did choose the right file tipe from the open file dialog. If anyone had similar experience and solved it, please let me know. Thanks.

  Read the article

• How come I can't ping my home computer?

  - by bikefixxer

  I'm trying to set up a vpn into my home computer in order to access files from wherever. I have the home computer set up with a no-ip dynamic dns program so I can always connect, and have also tried using the actual ip address. However, when I try to connect or even ping from anywhere outside of my house I can't get through. I've tried putting that particular computer in the dmz, turned off the computers firewall and anti-virus, and I still don't get anything. I have comcast as my home internet provider. I have also tried from two different locations. Are there any other solutions I can try or is comcast the issue? I used to be able to do this when I ran a small web server at home for fun but now nothing works. Thanks in advance for any suggestions!

  Read the article

• How do I unmount a tmpfs that is missing from /etc/mtab?

  - by vrinek

  I have the following line in /etc/fstab: none /home/hydra/tmp tmpfs user,noauto,size=1000M,uid=1001,gid=1001 0 0 I can do mount ~/tmp as user hydra and it gets mounted ok. The only problem is that even thought it gets added to /proc/mounts, it does not get added to /etc/mtab. When I try a umount ~/tmp (again as hydra) it complains: umount: /home/hydra/tmp is not mounted (according to mtab) And when I try -f or -n, it complains that I am not root. Some more info on the system that manifests this problem: On sudo umount /home/hydra/tmp, the fs gets unmounted (I think I needed to used -f too) Debian version is testing mount --version - mount from util-linux 2.19.1 (with libblkid and selinux support) ls -l /etc/mtab - -rw-r--r-- 1 root root 921 Nov 14 09:08 /etc/mtab cat /proc/mounts | grep rootfs - rootfs / rootfs rw 0 0 /home, /home/hydra nor /home/hydra/tmp are symbolic links

  Read the article

• Recovering text files in terminal using grep on Mac OS X Snow Leopard

  - by littlejim84

  I foolishly removed some source code from my Mac OS X Snow Leopard machine with rm -rf when doing something with buildout. I want to try and recover these files again. I haven't touched the system since to try and seek an answer. I found this article and it seems like the grep method is the way to go, but when running it on my machine I'm getting 'Resource busy' when trying to run it on the disk. I'm using this command: sudo grep -a -B1000 -A1000 'video_output' /dev/disk0s2 > file.txt Where 'dev/disk0s2' is what came up when I ran df. I get this when running: grep: /dev/disk0s2: Resource busy I'm not an expert with this stuff, I'm trying my best. Please can anyone help me further? I'm on the verge of losing two days of source code work! Thank you

  Read the article

• UFW: force traffic thru OpenVPN tunnel / do not leak any traffic

  - by hotzen

  I have VPN access using OpenVPN and try to create a safe machine that does not leak traffic over non-VPN interfaces. Using the firewall UFW I try to achieve the following: Allow Access from LAN to the machine's web-interface Otherwise only allow Traffic on tun0 (OpenVPN-Tunnel interface when established) Reject (or forward?) any traffic over other interfaces Currently I am using the following rules (sudo ufw status): To Action From -- ------ ---- 192.168.42.11 9999/tcp ALLOW Anywhere # allow web-interface Anywhere on tun0 ALLOW Anywhere # out only thru tun0 Anywhere ALLOW OUT Anywhere on tun0 # in only thru tun0 My problem is that the machine is initially not able to establish the OpenVPN-connection since only tun0 is allowed, which is not yet established (chicken-egg-problem) How do I allow creating the OpenVPN connection and from this point onward force every single packet to go thru the VPN-tunnel?

  Read the article

• PostgreSQL under Mac OSX Lion. Wrong userpass?

  - by Matt

  I'm completely helpless, maybe you guys can help me out. I installed PostgreSQL under my new MacOSX Lion. When I try to connect to my localhost with pgAdminIII.app it says: Error connecting to the database: FATAL password authentication failed for user postgres I just have no idea what to do? Non of my passwords work. Neither my adminpass nor "postgres" nor anyhting else. I tried to install it again via the console where I found this helpful link: http://www.peerassembly.com/2011/08/...resql-on-lion/ However the problem is, that when I try to run createuser -a -d _postgres the same password problem appears again. I just can't seem to find a solution to this. Always wrong password. Btw. I have a new User called "PostgreSQL" on my machine after I installed postgres. Any ideas? I'm so stuck and I really need to make this work.

  Read the article

• Windows 7, weird/annoying explorer problem

  - by Shiki

  First of all, I'm asking the moderators if you could summarize my problem in the Title and modify it according to that. Thanks in advance and sorry, my english is not that good. The problem. It happened on two of my machines already. Once it happens there are many problems with explorer. I'll try to describe at precisely I just can. So. Basically when you create a new folder, you have to hit the enter key TWICE because first it'll throw an error that "there is no such file..". Okay. Then if you try to delete some, this happens also. Renaming is the same. Here is an example. I tried adding a "2" to the end of the folder name, hit enter and got this. Here I can press cancel, nothing happens. If I press retry, the popup disappears and it'll finally change the folder name. I can't come up with anything for this. Using BitDefender (registered, full protection), Windows 7 x86 Ultimate retail (boxed, english version). The other PC had the same anti-virus protection , but it have a Windows 7 x64. Both systems are activated, updated totally. I don't remember installing any new stuff on the PCs. All the stuff on the PCs are legal, no cracked / any other software present. It just happened, so to say. Already reinstalled the other PC because I thought * I * messed up something and its just something FUBAR. However, I dont want to reinstall my laptop also. Any ideas are welcome. (Today I had a strange bug. Windows Explorer had 1.0+gb memory usage with 100% cpu. Killed it, launched a new explorer.exe and thats all. Nothing changed, but it may worth a try. The other PC did NOT have this problem, ever.) Isn't there a registry fix for this or something? :/

  Read the article

• Zimbra Relaying from Postfix connection timed out sending multiple emails?

  - by liamTc

  I have a web server setup with postfix which is relaying email to a zimbra server. This working fine however I have attempted to send a few thousand emails and now the connection from postfix to zimbra is timing out. All of the emails have been deferred on the postfix queue. If I try to send individual emails from postfix to zimbra it works fine. But if I try to flush the postfix queue all of the emails time out. In mail.log the emails look like this: postfix/error[2494]: 32B0950C04: to=, relay=none, delay=19431, delays=19402/29/0/0.01, dsn=4.4.1, status=deferred (delivery temporarily suspended: connect to mail.server.com[123.45.678.91]:25: Connection timed out) I have also noticed that in the above message it says "relay=none" for these emails that are failing. But the emails that do send say "relay=domainname.com". How I can resolve this, by sending the emails in the queue and avoiding this from happening again?

  Read the article

• WinXP Movie Maker Codec Error

  - by Bob Rivers

  I'm trying to use Windows XP Movie Maker, but when I try to import an AVI video, it shows an error telling me that it wasn't import due to an the fact that the codec wasn't available (I'm able to see the video using the windows media player) First, the error message suggested to enable the option "download codecs automatically" under "tools options general". I did it. But know the error tells me that the codec wasn't available and, if I already installed it, I should reinitialize movie maker. I also already did it... The error msg is: The file D:\movie1.avi cannot be imported because the codec required to play the file is not installed on your computer. If you have already tried to download and install the codec, close and restart Windows Movie Maker, and then try to import the file again. Any hints?

  Read the article

• Can't install Nuget or other extension to VS2012 on Win8

  - by VinnyG

  When I try to install any extension for visual studio ultimate 2012 on my new installation of Winodws 8 I get this exception : System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.VisualStudio.Settings.ExternalSettingsManager.GetScopePaths(String applicationPath, String suffixOrName, String vsVersion, Boolean isLogged, Boolean isForIsolatedApplication) at Microsoft.VisualStudio.Settings.ExternalSettingsManager.CreateForApplication(String applicationPath) at VSIXInstaller.App.GetExtensionManager(SupportedVSSKU sku) at VSIXInstaller.App.GetExtensionManagerForApplicableSKU(SupportedVSSKU supportedSKU, IInstallableExtension installableExtension, List`1 applicableSKUs) at VSIXInstaller.App.InitializeInstall() at System.Threading.Tasks.Task.InnerInvoke() at System.Threading.Tasks.Task.Execute() I tryed to repair VS, did not work, and also try to uninstall/install and got the same problem. Anybody as an idea?

  Read the article

• Multicast hostname lookups on OSX

  - by KARASZI István

  I have a problem with hostname lookups on my OSX computer. According to Apple's HK3473 document it says for v10.6: Host names that contain only one label in addition to local, for example "My-Computer.local", are resolved using Multicast DNS (Bonjour) by default. Host names that contain two or more labels in addition to local, for example "server.domain.local", are resolved using a DNS server by default. Which is not true as my testing. If I try to open a connection on my local computer to a remote port: telnet example.domain.local 22 then it will lookup the IP address with multicast DNS next to the A and AAAA lookups. This causes a two seconds lookup timeout on every lookup. Which is a lot! When I try with IPv4 only then it won't use the multicast queries to fetch the remote address just the simple A queries. telnet -4 example.domain.local 22 When I try with IPv6 only: telnet -6 example.domain.local 22 then it will lookup with multicast DNS and AAAA again, and the 2 seconds timeout delay occurs again. I've tried to create a resolver entry to my /etc/resolver/domain.local, and /etc/resolver/local.1, but none of them was working. Is there any way to disable this multicast lookups for the "two or more label addition to local" domains, or simply disable it for the selected subdomain (domain.local)? Thank you! Update #1 Thanks @mralexgray for the scutil --dns command, now I can see my domain in the list, but it's late in the order: DNS configuration resolver #1 domain : adverticum.lan nameserver[0] : 192.168.1.1 order : 200000 resolver #2 domain : local options : mdns timeout : 2 order : 300000 resolver #3 domain : 254.169.in-addr.arpa options : mdns timeout : 2 order : 300200 resolver #4 domain : 8.e.f.ip6.arpa options : mdns timeout : 2 order : 300400 resolver #5 domain : 9.e.f.ip6.arpa options : mdns timeout : 2 order : 300600 resolver #6 domain : a.e.f.ip6.arpa options : mdns timeout : 2 order : 300800 resolver #7 domain : b.e.f.ip6.arpa options : mdns timeout : 2 order : 301000 resolver #8 domain : domain.local nameserver[0] : 192.168.1.1 order : 200001 Maybe it would work if I could move the resolver #8 to the position #2. Update #2 No probably won't work because the local DNS server on 192.168.1.1 answering for domain.local requests and it's before the mDNS (resolver #2). Update #3 I could decrease the mDNS timeout in /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist file, which speeds up the lookups a little, but this is not the solution.

  Read the article

• DNS name not on cert

  - by blsub6

  I've got an interesting one... My users have always typed in 'mail' to get to their mail. There was an internal DNS A record that resolved that to the IP of the mail server. I'm putting in an Exchange server to replace that. In order for people to get their mail, I try putting in an A record that does the same thing as the previous one. When I try to get to OWA, it tells me that the certificate on the server is not trusted. I only have the names: mail.mydomain.com autodiscover.mydomain.com autodiscover.mydomain.internal mydomain.internal mailserver.mydomain.internal so when the browser sees that this cert is trying to cover https://mail/owa it says the cert's not trusted. What amy I supposed to do about that?

  Read the article

• Tune SQL Server Express using Profiler?

  - by Glen Little

  I have a SQL Server 2005 database... a copy of it is running in development on a full version of SQL server. Another copy is running in SQL Server 2005 Express on a web server. I've used SQL Profiler and saved a Tuning trace log from activity on the SQL Express copy of the database. I want to use the saved trace log in the Database Engine Tuning Advisor... If I try when connecting the Advisor to the Express database, I am told that Express is not supported. If I try when connecting the Advisor to the SQL Server database, I get empty results. Is there any way to do this?

  Read the article

• memcached and IIS manager with windows 2008

  - by user64484

  I have memcached (c:\memcached) running on port 11211 and I have a problem configuring IIS manager I created a site in IIS manager binded to port 11211 and if I have memcached running and try and start the site it says "the process cant access the file because it is being used by another process" If I stop memcached and start the site in IIS (and enable directory browsing) I can access the directory structure http://localhost:11211 ok, if I then try and start memcached it errors with error 1053 "could not start the memcached server on local computer" I know I'm doing something fundamentally wrong here! just cannot figure out how I can use IIS and memcached together. [edit]I should add that I need other servers to be able to access memcached[/edit]

  Read the article

• Windows 7 Wireless Network Adapter Stopped Working

  - by Andrew B Schultz

  I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >