Search Results

Search found 37414 results on 1497 pages for 'open port'.

Page 853/1497 | < Previous Page | 849 850 851 852 853 854 855 856 857 858 859 860  | Next Page >

• How do i Setup a Mac OS X Server - NameServer behind an Airport Extreme?

  - by basilmir

  I have a Mac mini server i want to setup to host a couple of things. My setup is as follows: The WAN connection (static IP and ISP nameservers) goes into the wan port of the Airport Extreme. The Mac mini server is connected to one of the ethernet ports. The mac mini will host my domain something.com. My settings so far: Airport Express gets: 96.x.x.x as the external static IP from the ISP 174.y.y.y as the nameserver Mac mini server always gets a reserved DHCP IP from the Airport Express: 10.0.1.3 is the server's ip 10.0.1.1 as the dns (this ip is the airport express itself) My dns server has an A record pointing to ns.something.com and a PTR doing the reverse. I've already added my 96.x.x.x to point ns.something.com with my registrar as attached. NOW: Nobody seems to be able to access my ns.something.com to resolve any of my records. From a any computer in my network I CAN see my ns and everything works. The outside on the other hand does not... it's as if the airport extreme which "holds" the exterior 94.x.x.x address doesn't pass DNS along to my 10.0.1.3 ns server. I have the server managing the airport. Isn't this supposed to work?

  Read the article

• Apache https is slow

  - by raucous12

  Hey, I've set apache up to use SSL with a self signed certificate. With https (KeepAlive on), I can get over 3000 requests per second. However, with https (KeepAlive off), I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

  Read the article

• Low-profile, PCI Express, x1 video card with VGA-out?

  - by Dandy

  I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

  Read the article

• RewriteRule causes POST data to get dumped before I can access it

  - by MatthewMcGovern

  I'm currently setting up my own 'webserver' (a Ubuntu Server on some old hardware) so I can have a mess around with PHP and get some experience managing a server. I'm using my own little MVC framework and I've hit a snag... In order for all requests to make it through the dispatcher, I am using: <Directory /var/www/> RewriteEngine On RewriteCond %{REQUEST_URI} !\.(png|jpg|jpeg|bmp|gif|css|js)$ [NC] RewriteRule . HomeProjects/index.php [L] </Directory> Which works great. I read on Stackoverflow to change the [L] to [P] to preserve post data. However, this causes every page to return: Not Found The requested URL <url> was not found on this server. So after some more searching, I found, "Note that you need to enable the proxy module, and the proxy_http_module in the config files for this to work." The problem is, I have no idea how to do this and everything I google has people using examples with virtual hosts and I don't know how to 'translate' that into something useful for my setup. I'm accessing my webserver via my public IP and forwarding traffic on port 80 to the web server (like I'm pretending I have a domain/server). How can I get this enabled/get post data working again? Edit: When I use the following, the server never responds and the page loads indefinately? LoadModule proxy_module /usr/lib/apache2/modules/mod_proxy.so LoadModule proxy_http_module /usr/lib/apache2/modules/mod_proxy_http.so <Directory /var/www/> RewriteEngine On RewriteCond %{HTTP_REFERER} !^http://(.+\.)?82\.6\.150\.51/ [NC] RewriteRule .*\.(jpe?g|gif|bmp|png|jpg)$ /no-hotlink.png [L] RewriteCond %{REQUEST_URI} !\.(png|jpg|jpeg|bmp|gif|css|js)$ [NC] RewriteRule . HomeProjects/index.php [P] </Directory>

  Read the article

• Find out what fonts are being sent to a printer

  - by user38307

  I have an issue where two computers running XP and with identical print drivers have different behavior printing over parallel port to receipt printers. For one type of receipt, receipt printing is instant. For another kind printing is delayed by ten seconds on most machines but not on the other. This happens even if I swap out printers. I believe the delay is because this computer has a different set of fonts installed. (It is used for graphic design.) The printers have built-in fonts, and if you do not use one of the built-in fonts the printer has to build up an image in memory rather than just spitting out its fonts. For a particular kind of receipt with special fonts on a particular computer the computer is sending a font which the receipt printer does not have built in. My question is, is there a way to find out what fonts are being sent to the printer? This would let me narrow down what I need to modify in the Windows font folder. Thank you!

  Read the article

• What other ways can I load balance EC2 servers without using Elastic Load Balancing?

  - by undefined

  I have a web application that consists of a web server managed by a web hosting firm, a set of EC2 instances in amazons cloud and a MySQL database (hosted on the webserver). MySQL is behind a firewall and is set to allow access from Localhost and from a single IP address which is an Amazon Elastic IP address that is attached to the EC2 instance I have been running up to now. The problem is that I want to look at my scaling up and load balancing strategy for my EC2 instance. To this end I have been investigating the Elastic Load Balancers and Autoscaling tools that Amazon provides and have managed to set this up fine but for one thing - connecting to the MySQL database running on my webserver. I realised (thanks to answers on Serverfault) that I needed to check firewall settings and add the IP address for the load balancer, however Elastic Load Balancers provide you with a DNS name, not an IP address and infact the IP addresses change over time so this will not work. I have been told by the company hosting the database that the way the firewall works is to look up the IP address of the DNS name and store the IP rather than the DNS name. so basically this will not work and the only way to allow access would be to open up the SQL port to allow access from anyone! Is this a viable idea? Should I look at moving my database into the cloud? Is there another firewall that the server company can use? Should I find another way of load balancing (if so what?) tricky one eh? any help appreciated!

  Read the article

• hi, beginner issue with socat [closed]

  - by ams

  the main question is how to begin sending request to server with some data(send request with number) and get data from server?? and second question is how can i solve this simple question (author said) ? In this part, you should write a simple Shell script which receives URL of a website by sending your student number to a server and after creating and sending HTTP request for this URL, receives the desired content. Finally the content should be saved in an HTML file. Steps 1. Connect to port 4000 of the server and send the massage which includes your student number (e.g. 89207704) to the server. Receive the URL in the form of http://www.example.com. Create the HTTP request and send it to the website's server. Receive the content of the URL from the website. Save the content in the HTML file. what i can do? how i begin? thank u all the topology that exercise is speaking about is here Topology is here Is there any easy way to do this?

  Read the article

• Limited bandwidth and transfer rates per user.

  - by Cx03

  I searched for a while but couldn't find anything concrete, hopefully someone can help me. I'm going to be running a Debian server on a gigabit port, and want to give each user his/her fair share of internet access. The first objective is easy - transfer rates (speed) per user. From what I've looked at, IPTables/Shorewall could do the job easy. Is this easy to setup, or could one of you point me at a config? I was hoping to limit users at 300mbit or 650mbit each. The second objective gets complicated. Due to the usage of the boxes, most of the traffic will be internal network traffic that does NOT get counted to the quota. However, I still need to limit the external traffic, and if they go over, cut off access (or throttle traffic to a very low speed (10mbit?)). Let's say the user has a 3TB external traffic limit. The IF part is: If the hostname they are exchanging the traffic with DOES NOT MATCH .ovh. or .kimsufi. (company owns multiple TLDs), count to the quota. Once said quota exceeds 3TB, choke them. Where could I find a system to count that for me? It would also need to reset or be able to be manually reset on a monthly basis. Thanks ahead of time!

  Read the article

• Switched to new router and now experiencing lag?

  - by Mr_CryptoPrime

  I switched from a dynex-802.11b/g to a Netgear-802.11b/g/n just yesterday. My router is down stairs because my phoneline upstairs is retarded....but my PS3 is still upstairs (SOCOM: Confrontation is game I am experiencing issues). I have done everything I can to make sure the connection is solid and have checked the status and it has been as high as 80% and usually lingers at about 60%. I thought about upgrading my bandwidth from 1.5mbs to 7mbs, but I am guessing something is wrong if it worked fine before? Now the game seems more laggy and my voice chat is choppy. Others seem to receive my voice data fine because I can hear my own feedback clearly from other players (if you are in close proximity to another player and speak and there volume is loud enough sometimes you can hear yourself). I wonder if I port forward or setup DMZ then it will be fixed, but I am not sure and don't know quite how to do it. Has anyone else ever experienced this when switching routers? What did you do to fix it? Thanks!

  Read the article

• How to get a list of Dovecot IMAP users

  - by Colt McCormack

  How do you get a list of users for a dovecot email server that connect via IMAP (as opposed to POP)? Our server is setup to authenticate via LDAP/PAM. Is there an easy way to get a list of the users who are accessing their mail via IMAP, rather than POP? I am about to migrate our server to Google Apps and want to migrate all of the mail for my IMAP users only (couple hundred out of several hundred total users). POP mail will be migrated separately from the client end obviously. I would much rather migrate only the IMAP users rather than the whole domain which would include migrating a bunch of POP mail left in the server that has already been read/sorted/deleted in the client's email program. Migrating all of that extra useless leftover POP mail could waste weeks of migration time. I suppose parsing some logs to see who has connected on an IMAP port (995 or 993) would give me a list would work if someone could help me do that. I know I have the raw dovecot logs, but am hoping for a cleaner solution.

  Read the article

• ASA 5505 VPN setup. VPN works but still unable to reach devices in the inside network.

  - by chickenloop

  I've setup a Remote Access VPN on my Cisco ASA 5505. I'm able to connect to my ASA via my phone or the Cisco client, but I'm unable to reach devices in my inside LAN when connected via VPN. The setup is the following: Inside Network : 10.0.0.0/24 VPN_POOL: 172.16.0.0/24 Outside Network: 192.168.1.0/24 ASA is not the perimeter router, there is another device on the 192.168.1.0/24 network which is connected to my cable provider. Obviously UDP port 500 and 4500 are forwarded to the ASA's outside interface. Everything works perfectly, besides the VPN stuff. Config: interface Vlan1 nameif inside security-level 100 ip address 10.0.0.254 255.255.255.0 interface Vlan2 description Outside Interface nameif outside security-level 0 address 192.168.1.254 255.255.255.0 object network VPNPOOL subnet 172.16.0.0 255.255.255.0 object network INSIDE_LAN subnet 10.0.0.0 255.255.255.0 Then the exempt NAT rule. nat (inside,outside) source static INSIDE_LAN INSIDE_LAN destination static VPNPOOL VPNPOOL I don't think that the problem is with the VPN config, as I can successfully establish the VPN connection, but just in case I post it here: group-policy ZSOCA_ASA internal group-policy ZSOCA_ASA attributes vpn-tunnel-protocol ikev1 split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel default-domain value default.domain.invalid tunnel-group ZSOCA_ASA type remote-access tunnel-group ZSOCA_ASA general-attributes address-pool VPNPOOL default-group-policy ZSOCA_ASA tunnel-group ZSOCA_ASA ipsec-attributes ikev1 pre-shared-key ***** Any ideas are welcome. Regards.

  Read the article

• How to slave a 3.5" 500gb SATA external hard drive (Western Digital) to my Dell Inspiron laptop

  - by AJ HDD

  I have a 3.5" Western Digital My Book 500gb external hard drive. I gave it to a friend of mine, and he broke the USB port in it. I went to a nearby comp repair shop and had him solder the thing, and it didn't detect when it when I plugged it into my Dell Inspiron laptop. I recently saw about the 3.5" SATA to USB enclosure, so I went to check it. Strangely, when its placed in the enclosure, its not detecting in Windows. Also, when it was put as secondary (I'm guessing slave) to the shop fellow's desktop, it shows up in the BIOS and while starting, but then again doesn't show in Windows 7. The guy told me that I need to use a data recovery tool to get my data back. P.S. Whe WD hard drive doesnt have an OS, just data. So my question is: Can I slave the drive to my Dell laptop and try to recover the data, and if so how? I would really appreciate it any help, thanks in advance.

  Read the article

• SMTP Server setting on Windows 2008 R2

  - by user223298

  I am very very new to this and just trying to configure SMTP virtual server. I have followed a few threads to get it all running, but the mails are not being delivered. What I have done so far - 1) Install SMTP server. 2) SMTP server Properties General Tab - IP address is set to 'All Unassigned'. Access Tab - Authentication is anonymous access. Everything else is left to Default settings. Delivery Tab - Outbound security is anonymous access. In Advance section, entered the domain name in the FQDN field, and localhost in Smart host field. 3) Created an Inbound Rule for SMTP service to allow connections to Port 25. When I try to telnet, everything works up until the point the mail has to be send. Now, the sender's domain is different to the receiver's domain. Not sure if settings have to be changed to allow that? I had set the Relay restrictions on SMTP server, but because I couldn't send the mails, I thought I might as well make it work without the relay first. The error I see while sending the mail is 451 Timeout waiting for client input. I used to get some other error before when I had Relay restrictions on. Can anyone please point me in the right direction? Please let me know if you need more information. Thanks.

  Read the article

• ImageMagick installation confusion

  - by Codemonkey

  Well this is turning out to be a pain. I'm on CentOS 6.5. I saw on the PECL ImageMagick changelog that they added a load of constants for new filters, such as LANCZOS2SHARP. Some testing I did earlier suggested that PhotoShop 6.5 was able to downsize photos with better clarity than my current ImageMagick's best effort of LANCZOS, so I thought I'd try to upgrade to test out the newer filters. So, first port of call - get source from pecl for 3.2.0RC1. Installed with no problems. But, ah-ha. Although it says it only requires IM 6.2.4, the filters I'm after don't work unless you have 6.6.6+ So I go http://www.imagemagick.org/script/install-source.php to install the newest version. This is the bit that's puzzled me. It all appears to have installed fined. The tests work fine, passing 40 out of 40. If I run identify -version on the command line it outputs 6.8.9 But if I echo Imagick::getVersion() in PHP it shows 6.5.4, even after restarting php-fpm. rpm -qa | grep ImageMagick shows that I still have 6.5.4 installed locate ImageMagic also only seems to show the 6.5.4 one I feel that the missing link here is ImageMagick-devel, do I need to install that too? How do I go about doing that? Or do I just need to reinstall the pecl-imagemagick 3.2.0RC1 now that I have the latest IM installed?

  Read the article

• Firefox Does NOT get local site cookie

  - by Campo

  This is a weird one. We have a production server (Server 2008) and two staging servers (Server 2008 and Server 2003) I have sites on all of these. They all use cookies. On the Production server when browsing to our site www.supernovainteractive.com there is a cookie that detects when you visted the site and it will not refresh the logo animation (top left hand side) on clicking to another page. This works for all browsers on the production server. I’m not sure what’s going on but for some reason cookies are not working on one site in the 2008 staging server only. This is when browsing using Firefox (3.6.3) they work fine on all other browsers (IE, Chrome, Safari, Opera) In addition, the 2003 staging server works fine. You can test on the Supernova Interactive site by noticing the logo in the top left corner. It uses a cookie to detect if you’ve already seen the animation. Once you’ve seen it once, it doesn’t animate again until tomorrow. Currently, it’s animating every time. I have opened an outside facing port so others can see the issue. Http://exchange.supernova.com:10009 Any ideas on this one? Firewalls are off on the server. Notice you do not get a cookie from Exchange.supernova.com.

  Read the article

• USB Device Not Recognized (Mac)

  - by Nargis

  Fortunately, my Mac-pro also made one of my USB storage devices inoperable. My data loss in that USB device but such as another USB device and USB keyboard are unaffected. I have heard that my friend usually trigger this problem by having at least two devices plugged in - typically thumb drives/USB flash drives, and then once a second flash drive is plugged in that become unrecognized. I have only two USB ports and first I think port loose when I connect two USB devices. But later I found these hidden files (“.Spotlight-V100”, “.TemporaryItems”, “.Trashes”, and “._.Trashes”) are created by Mac OS. And before unrecognized that USB device I have deleted these files and my friend had also done the same action. Now I don’t want to test for next USB device to become unrecognized and I won’t deleted any hidden system file inside the flash drives. But I really want to know why these problems happened. Can I delete these hidden files when I only connect to virtual machine (Vista), because I used to delete all useless hidden files from USB flash drives? Any suggestions or thoughts to prevent this or alternative suggestions to fix the problem that take lossless would be much appreciated.

  Read the article

• How many iptables block rules is too many

  - by mhost

  We have a server with a Quad-Core AMD Opteron Processor 2378. It acts as our firewall for several servers. I've been asked to block all IPs from China. In a separate network, we have some small VPS machines (256MB and 512MB). I've been asked to block china on those VPS's as well. I've looked online and found lists which requires 4500 block rules. My question is will putting in all 4500 rules be a problem? I know iptables can handle far more rules than that, what I am concerned about is since these are blocks that I don't want to have access to any port, I need to put these rules before any allow. This means all legitimate traffic needs to be compared to all those rules before getting through. Will the traffic be noticeably slower after implementing this? Will those small VPS's be able to handle processing that many rules for every new packet (I'll put an established allow before the blocks)? My question is not How many rules can iptables support?, its about the effect that these rules will have on load and speed. Thanks.

  Read the article

• How to divert traffic based on hostname using HAProxy?

  - by Bosky

  I've had some initial success with HAProxy setting up a bunch of app servers listening on various other ports. I now have another webserver listening on one port, and i'd like to what changes to make to my config to flow traffic by hostname as well. The following is the current setup, assuming: my apache webserver is running at examplecom:8001 my bunch of app servers 0.0.0.0:8081, 0.0.0.0:8082 , 0.0.0.0:8083 global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 debug #quiet #user haproxy #group haproxy defaults log global mode http option httplog option dontlognull retries 3 redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 listen appservers 0.0.0.0:80 mode http balance roundrobin option httpclose option forwardfor #option httpchk HEAD /check.txt HTTP/1.0 server inst1 0.0.0.0:8081 cookie server01 check inter 2000 fall 3 server inst2 0.0.0.0:8082 cookie server02 check inter 2000 fall 3 server inst3 0.0.0.0:8083 cookie server01 check inter 2000 fall 3 server inst4 0.0.0.0:8084 cookie server02 check inter 2000 fall 3 capture cookie vgnvisitor= len 32 (any other comments on the ^ setup are welcome.) Now I'd like to continue the same above, but in addition in case - if the hostname is myspecialtopleveldomain<dot>com, then would like to flow traffic to example<dot>com:8001 ~B

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• How can I make AdobePS recognize my printer in Win98se?

  - by Jeff

  I am trying to use the adobe product: "PostScript Printer Driver AdobePS 4.2.6 for Windows 95 and Windows 98" to connect a new HP laser printer (CP1025nw) via USB to a machine running win98SE. I am using the PPD file for "HP color LaserJet PS". The Adobe utility installs the printer, and it shows up on the printer list ... but it doesn't print. I get an error message (sometimes) that an error occurred writing to USB001.. Evidently, AdobePS cannot "See" the printer. I suspect there is a problem wrt the printer port. Nothing I pick works. I have two virtual printer ports, USB001 and USB002 which were created during the installation of an HP inkjet printer. The inkjet will work on either of these, but the laser printer works on neither. When I connect the laserjet printer, the windows New Hardware Wizard activates, but I don't see how to point it at the AdobePS Postscript driver. HP has no support whatsoever for win98, so there's no hope of getting help from them. The printer works great with the several winXP computers connected through either the network connection or the USB. So, how do I convince Win98se to use the adobe postscript printer driver? Is this printer even a postscript printer? Is there a better way to get win98se to talk to this printer? Any suggestions?

  Read the article

• 2 Web Servers, 2 Domains, 1 WAN IP configuration

  - by Tillman32

  The Problem: I have 2 domains, 2 web servers, 1 WAN IP. This is on a home network, so I don't have any crazy router or anything with the right tools, at least I don't think I do. I have a Dlink DIR-655 router. I need to be able to forward the website to the right box. 1 server is hosting www.site1.com, and the other should be hosting, www.site2.com. I forwarded the domain, to a port that is forwarded to that box. wanip:1235, 1235 is then forwarded to the internal IP of site2's server. But when I go to www.site2.com I get the 404 page of www.site1.com. I need www.site2.com to go to the right server. Is this something I can do in the virtual hosts of www.site1.com or is it something else. Also, if this isn't entirely possible, or if its a big process, I can just move www.site1.com to the www.site2.com's server, and use virtual hosts, that is an option that I would be okay with.

  Read the article

• Have some questions about setting up a VPN to my private cloud servers

  - by Pure.Krome

  I've got a number of Virtual Servers running at a pretty big Cloud provider. They are all running Windows 2008 R2. I have a CISCO ASA firewall in front of them. Currently, I've got all ports blocked except 80/443/21/3386 (for Remote Desktop). I asked to have a VPN enabled on the firewall and they said it's easy to do BUT I need to use the 3rd party Cisco software. Now, I don't want to get into a debate about it .. but we don't want to install anything extra on our -client- computers. We all use Windows 7 and we love using the built in VPN client to connect to other private LANS we have setup in other locations. So i'm wondering what options I have to create a VPN tunnel to our private cloud LAN? All our cloud servers are part of WORKGROUP, so there's no Active Directory .. nor do we want to install all that. Secondly, we know we can open up a firewall port - so any ports for starting a VPN is fine! Lastly, I was thinking of just using one of the existing servers as the VPN server (and using the Windows VPN software) .. but I'm not sure this is a good thing? Remember - we just want to use the baked in VPN software in Windows 7 .. which is PPTP or SSTP or L2TP/IPSEC. I would -LOVE- to use some free OSS software. For usernames/passwords? We'd probably just have one account .. like U:Hithere P:whatever.. so we don't need any hardcore account management, like Active Directory, etc. So does anyone have any ideas?

  Read the article

• Network Sniffing and Hubs

  - by Chris_K

  This will likely seem naive to the experts... but it has been on my mind lately. For years I've been using ntop and a cheap 4 port hub to sniff client networks to determine who's doing what -- and how much. Great way to see what's going on when they call and say "Geeze, the network seems really slow today." No need to bring in a managed switch (or access the existing one) and no need to configure spanning or mirroring. I just drop in the hub inline where I want to measure. Lately I noticed it is just about impossible to buy a real honest-to-goodness hub anymore. While looking for a new one, I had someone tell me that I should be sure to get a full-duplex hub or I'd only be seeing half the traffic when I monitor. Really? I've been using a crusty old Netgear DS104 all this time. No clue if it is half or FD. Have I really been understating my measurements? I'm just not bright enough about the physical layer to really know... Side note: Just ordered a Dualcomm Ethernet Switch TAP as a hub replacement. Seems like a nifty gadget. Any notes or tips about it would be welcome in the comments :-)

  Read the article

• AT&T Filtering FTP traffic?

  - by xpda

  Using an AT&T DSL, I cannot ftp upload or ftp download a few files of a large 1500 set. The problem is the file name. I can change a few characters of the file name, and they upload fine. I can change the file names from upper to lower case and they upload fine. If I change back to the original file name, it will not upload again. When it doesn't upload, it starts, transfers about 5% of a 5-10 meg file, and then times out. I have uploaded one of the files under a different name, changed the name back to the original, and it will not download via ftp. It will download onto a browser, and it will ftp download just fine with a different name. It just will not download with ftp. I have reproduced this uploading to three different servers on 1and1 and Amazon EC2. When I try it on a non-AT&T ISP client, it works OK. Here is a file that did not upload until I had renamed it. (I have changed it back to the original name): "http://xpda.com/nautnew/11302 STOVER POINT TO PORT BROWNSVILLE SIDE A.png" This problem is unrelated to connection, speed, and file content. Only things I can see that makes a difference are the file name and ATT DSL. Does ATT have some kind of ftp file filtering? Is there anything else that could cause this behavior?

  Read the article

• Windows 7 VPN only works if I connect it to itself first

  - by user1799075

  Just so you have some detail, VPN request are port forwarded from a linksys router hosting the global static IP (to the world) to the windows 7 machine. The ports have been added to the OK list. I have the incoming VPN connection setup on win 7 but the only way it will work from anywhere outside the physical machine is if I connect from itself to itself first. For example, let's say my internal static IP is 10.0.0.50 and incoming VPN server connection IP is 10.0.0.80 (both on the same machine). I can't connect via VPN from anywhere unless I first VPN from the machines .50 address back to itself on the .80 address. Once I do that, I can connect form anywhere, even my phone. It's as if once the machine reboots it thinks it should block requests on .80 until .50 connects first. BitDefender antivirus/firewall is loaded (windows firewall is off) I don't see anywhere to exclude ports in the BitDefender control panel. Maybe this initial connection opens the ports and tags them as safe because the initial request came from the same machine? Any thoughts? It's driving me nuts and I'm sick of having to drive half way across town over to the server, try to get building access and do the initial connection. Please help

  Read the article

< Previous Page | 849 850 851 852 853 854 855 856 857 858 859 860  | Next Page >