Search Results

Search found 24675 results on 987 pages for 'table'.

Page 855/987 | < Previous Page | 851 852 853 854 855 856 857 858 859 860 861 862  | Next Page >

• How do I create an MBR on a USB stick using DD command line tool

  - by Lana Miller

  Okay I'm trying to create a BOOTABLE Windows7 image on a USB key from a Mac running Lion. My image is .iso format. I tried: sudo dd if=/Users/myusername/Win7.iso of=/dev/disk1 bs=1m And this succeeded in writing the files, except in DISK UTILITY on the mac, it shows the partition type as GUID Partition Table and not 'Master Boor Record'. Booting the key on my Vista computer yields the error "No boot sector on USB Device' From what I can tell, bs=1m in the DD command should have left 1 Megabyte for the boot sector, but for some reason this area of the USB Key is not set up correctly so that it will boot How can I fix this, or correctly use dd to write a bootable cd image such that it is now a bootable usb drive? Note: in the instructions I read about, they recommended renaming my Win7.iso to Win7.dmg before using DD, which made absolutely no sense to me, so I didn't do it. I could try with that step now, but it takes 1.99 hours to write the image to the USB drive so there is a huge penalty to trial and error here. Thank you.

  Read the article

• How to set up GRUB2 chainloader to other Grub (Fedora, Debian) on GPT

  - by basic6

  I'm trying to set up a dedicated GRUB2 which (chain-)loads another GRUB on a disk with GPT partition table. Relevant partitions: /dev/sda1 BIOS_BOOT /dev/sda2 BOOT (ext2) /dev/sda3 FEDORA (ext4) /dev/sda6 DEBIAN (ext4) I installed Fedora first, using /dev/sda2 as boot partition. Then I installed Debian. The Debian installer recognized the Fedora installation and added it as boot entry, then installed its GRUB into the MBR. While this works for the moment, it's pretty messy, because every Debian update may change the boot config, removing the Fedora entry (tried it) and the other way around. That's why I want both systems to have their own boot loader and one main boot loader (that could reside on /dev/sda2), which loads one of them. This is what I've tried: Moved everything from /dev/sda2 to /dev/sda3/boot Removed /boot mount point in Fedora (so /dev/sda2 isn't used anymore) From a live Linux, installed GRUB2 to the MBR (grub-install --boot-directory=sda2 /dev/sda) Wrote a menu.lst: title Fedora root (hd0,2) chainloader +1 (Again, for Debian) Converted that to a grub.cfg script (grub-menu2cfg or something like that) When booting, actually got a GRUB2 menu with "Fedora" (and "Debian") When selecting any one of those: error: invalid signature Issued "grub-install /dev/sda6" (and ...sda3) from all kinds of live Linux systems, all of which failed with another error message (in the case of the Debian installer, without explanation at all) Added --force to the chainloader line, now it says "loading", then reboots Found douzens of howtos, none of which seem to work for me Since I get the self-made GRUB2 menu on bootup, I've at least successfully installed the first stage of GRUB, right? When trying to chainload, some signature is checked and seems to be wrong - how do I fix it? The boot menus (Fedora with its different Kernel versions and Debian with Debian and Fedora as well) are now on the system partitions (/dev/sda3, /dev/sda6), is there anything else to do on these partitions, so they can be chainloaded? Any help is greatly appreciated.

  Read the article

• Excel chart with year-to-year comparison

  - by Craig

  Given this data: Date Year Month Usage (Kw-h) Cost/Month 02/19/08 2008 2 501 59.13 03/18/08 2008 3 404 48.49 04/16/08 2008 4 387 45.67 05/22/08 2008 5 319 37.85 06/23/08 2008 6 363 43.81 07/23/08 2008 7 372 48.86 08/21/08 2008 8 435 59.74 09/23/08 2008 9 358 49.9 10/16/08 2008 10 313 42.01 11/20/08 2008 11 328 39.99 12/16/08 2008 12 374 44.7 01/20/09 2009 1 474 55.35 02/19/09 2009 2 444 52.85 03/19/09 2009 3 398 49.25 04/17/09 2009 4 403 51.05 05/19/09 2009 5 405 49.61 06/18/09 2009 6 373 45.18 07/20/09 2009 7 337 44.67 08/18/09 2009 8 369 50.73 09/17/09 2009 9 377 52.36 10/16/09 2009 10 309 43.4 11/17/09 2009 11 249 34.14 12/16/09 2009 12 327 41.79 01/20/10 2010 1 356 45.66 I would like to produce a report that displays a Usage (Kw-h) line for each year. Features: Y axis: Usage (Kw-h) X axis: Month Line 0..n: lines representing each year's monthly Usage (Kw-h) Bonus points: instead of a line for each year, each month would have a high-low-close (HLC) bar; 'close' would be replaced by the average second Y axis and HLC bar that represents cost/month Questions: Can this be done without a Pivot table? Do I need to have the Year and Month column or can Excel automatically determine this? Current chart:

  Read the article

• Cannot connect to windows server by name over vpn connection

  - by ErocM

  I have a rented dedicated windows server on a public ip that is acting as a SQL Server and VPN server. I need to connect to this server via computer name to get replication in place. I cannot use an ip address due to this issue: So, due to this, we are going the VPN route. That is my primary issue: After I am connected to this server's vpn, I can connect to SQL Server using the ip address but I cannot connect by the computer's name as you can see below... Right now, there is no hardware firewall on it since I had it removed to test this issue. I am running Windows 2008 Enterprise Server as the VPN server. I am not sure if the route print will help any from the workstation trying to connect but here is the info: IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 10.0.0.0 255.0.0.0 10.0.0.1 10.0.0.2 21 10.0.0.2 255.255.255.255 On-link 10.0.0.2 276 Any other info needed? Thanks for the help! ========= CLARIFICATION ON A FEW THINGS #1 ========= This is the server's info: This is the workstation that is trying to connect: I connect to the server via "Control Panel\Network and Internet\Network and Sharing Center\Connect or Disconnect" You can see here that I am connected: ========= CLARIFICATION ON A FEW THINGS #2 ========= I've tried to connect directly to the Sql Server as I did above but with the computers name and I couldn't get to it. Here I am trying to net view it from the workstation and it couldn't find it:

  Read the article

• What are the possible disadvantages of enabling the "data access" server option in sys.servers for t

  - by Corp. Hicks

  We plan to change the default server options of an SQL2k5 server instance by enabling data access. The reason is that we want to run "SELECT * FROM OPENQUERY(LOCALSERVER, '...')" -like statements on the server. What are the possible disadvantages of enabling server option "data access" (alias sys.servers.is_data_access_enabled) for the local server (sys.servers.server_id = 0)? (There must be a reason for MS setting this option to disabled by default...) EDIT: it turns out that I'm not the first person to ask this question: http://sqlblogcasts.com/blogs/piotr_rodak/archive/2009/11/22/data-access-setting-on-local-server.aspx "The DATA ACCESS server option is not very well documented in my opinion - the Books On Line say it is a property of linked servers. It doesn't mention at all that you actually can have it enabled on your local server to enable OPENQUERY calls. I noticed that when you disable DATA ACCESS on a linked server, you can't query any table located on it (I tested it on my loopback server) neither using OPENQUERY nor four-part naming convention. You can still call procedures (with four-part naming) that return rowsets. Well, the interesting question is why it is disabled by default on local server - I suppose to discourage users from using OPENQUERY against it." It also seems that the author of the post (Pjotr Rodak) is a Stack Overflow user :-)

  Read the article

• Real benefits of tcp TIME-WAIT and implications in production environment

  - by user64204

  SOME THEORY I've been doing some reading on tcp TIME-WAIT (here and there) and what I read is that it's a value set to 2 x MSL (maximum segment life) which keeps a connection in the "connection table" for a while to guarantee that, "before your allowed to create a connection with the same tuple, all the packets belonging to previous incarnations of that tuple will be dead". Since segments received (apart from SYN under specific circumstances) while a connection is either in TIME-WAIT or no longer existing would be discarded, why not close the connection right away? Q1: Is it because there is less processing involved in dealing with segments from old connections and less processing to create a new connection on the same tuple when in TIME-WAIT (i.e. are there performance benefits)? If the above explanation doesn't stand, the only reason I see the TIME-WAIT being useful would be if a client sends a SYN for a connection before it sends remaining segments for an old connection on the same tuple in which case the receiver would re-open the connection but then get bad segments and and would have to terminate it. Q2: Is this analysis correct? Q3: Are there other benefits to using TIME-WAIT? SOME PRACTICE I've been looking at the munin graphs on a production server that I administrate. Here is one: As you can see there are more connections in TIME-WAIT than ESTABLISHED, around twice as many most of the time, on some occasions four times as many. Q4: Does this have an impact on performance? Q5: If so, is it wise/recommended to reduce the TIME-WAIT value (and what to)? Q6: Is this ratio of TIME-WAIT / ESTABLISHED connections normal? Could this be related to malicious connection attempts?

  Read the article

• Debian/Ubuntu - No network connection

  - by leviathanus

  I have a very weird situation on my Ubuntu 12.04 LTS Server. I can not access (ping) my gateway, although I believe my config is ok - I attach the outputs. Any hints where to look? (I changed the beginning of the IP to something different, just obfuscation) ping 5.9.10.129 PING 5.9.10.129 (5.9.10.129) 56(84) bytes of data. From 5.9.10.129 (5.9.10.129) icmp_seq=2 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=3 Destination Host Unreachable From 5.9.10.129 (5.9.10.129) icmp_seq=4 Destination Host Unreachable uname -r 3.2.0-29-generic ifconfig eth0 eth0 Link encap:Ethernet HWaddr 3c:97:0e:0e:54:d7 inet addr:5.9.10.142 Bcast:5.9.10.159 Mask:255.255.255.224 inet6 addr: fe80::8e70:5aff:feda:c4ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1216 errors:0 dropped:0 overruns:0 frame:0 TX packets:490 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107470 (107.4 KB) TX bytes:34344 (34.3 KB) Interrupt:17 Memory:d2500000-d2520000 ip route default via 5.9.10.129 dev eth0 metric 100 5.9.10.128/27 via 5.9.10.129 dev eth0 5.9.10.128/27 dev eth0 proto kernel scope link src 5.9.10.142 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 5.9.10.129 0.0.0.0 UG 1000 0 0 eth0 5.9.10.128 5.9.10.129 255.255.255.224 UG 0 0 0 eth0 5.9.10.128 0.0.0.0 255.255.255.224 U 0 0 0 eth0 iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination UPD: Eric, this is how routing information looks on a working server: 0.0.0.0 78.47.198.49 0.0.0.0 UG 100 0 0 eth0 78.47.198.48 78.47.198.49 255.255.255.240 UG 0 0 0 eth0 78.47.198.48 0.0.0.0 255.255.255.240 U 0 0 0 eth0 As I understand it, Hetzner tries to ensure security by this, so I can not take over an IP by changing my MAC. But this is another server, which has another netmask (255.255.255.240) UPD2: BatchyX, on the working server: 78.47.198.49 dev eth0 src 78.47.198.60 cache on the broken: 5.9.10.129 dev eth0 src 5.9.10.142 cache

  Read the article

• Certain Japanese characters aren't displayed properly

  - by Nisto

  On the following site: http://www.nciku.com/search/radical the first 2 characters on the second row of the "Step 2" table aren't displayed properly. All other characters look fine. I tried re-installing the Asian fonts via the checkboxes regarding Asian fonts in the "Regional and Language Options" control panel applet. I have tried removing every single Font from the Fonts folder (some were ofcourse not possible to remove), and re-installing them all again. I did this by... Running cmd Closing down the explorer process In cmd; using the command DEL /F /S /Q * in the Fonts folder Putting in my XP SP3 Retail disc In cmd; using expand -r *.tt_ in the I386 folder on the XP disc (and any other font file, in the I386\LANG folder) I also tried installing this pack from Microsoft, but this solved nothing either. I even tried running my browser (Firefox) through AppLocale. And changing character encoding -- again, does not help. I've also tried viewing the page in Internet Explorer. What could be wrong? I have checked my Fonts folder, to make sure that every single font available on the XP disc is available in WINDOWS\Fonts. What shows in the first square on the second row - I can't really tell what it's supposed to look like (but it's not the proper character)... but the second square shows a rectangular symbol containing HEX code. I've been in this situation before -- and it has been when I've been missing fonts. But how could I possibly be missing a necessary font? Shouldn't it be provided in the Asian "font packages"? I've talked to some other users that has viewed the page, and they had no problems displaying those characters on second row - even though they're only using the fonts provided on the Windows installation disc. Windows XP Professional Service Pack 3 (x86 - with latest updates) Firefox 3.6.15

  Read the article

• android geting data from sql

  - by sagar

  Hello i m new to android. i wont to connect to sql server for store and get data so so me one can help me sending code of android for do it.. i had tried to do tht with java nd it was workink but now i wont to create a aplication for android my java code is :: import java.sql.*; public class MysqlTest { public static void main (String[] args) { Connection conn = null; try { String userName = "pietro"; //change it to your username String password = "pietro"; //change it to your password String url = "jdbc:mysql://192.168.0.67:3306/registro"; Class.forName("com.mysql.jdbc.Driver").newInstance(); conn = DriverManager.getConnection(url, userName, password); Statement s = (Statement) conn.createStatement(); // code for create a tabel in server s.execute("create table School2 (rolno integer,sub text)"); // code for create a tabel in server s.execute("insert into School2(rolno,sub)values(10,'java')"); //code for add value in tabel s.execute("select rolno,sub from School2");//code for add value in tabel s.close(); System.out.println("Database connection established"); } catch (Exception e) { System.err.println("Cannot connect to database server"); } finally { if (conn != null) { try { conn.close (); System.out.println("Database connection terminated"); } catch (Exception e) { /* ignore close errors */ } } } } }

  Read the article

• IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing issue

  - by Ernest Mueller

  I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

  Read the article

• convert a logical partition to a primary partition

  - by ant2009

  Hello, Fedora 14 xfce I have the following partition setup. I would like to know how can I convert the logical partition sda6 to a primary partition. Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1707a8a5 Device Boot Start End Blocks Id System /dev/sda1 2048 1026047 512000 83 Linux /dev/sda2 1026048 205844479 102409216 83 Linux /dev/sda3 205844480 214228991 4192256 82 Linux swap / Solaris /dev/sda4 214228992 625141759 205456384 5 Extended /dev/sda5 214231040 573562879 179665920 83 Linux /dev/sda6 573564928 625141759 25788416 7 HPFS/NTFS Filesystem Size Used Avail Use% Mounted on /dev/sda2 97G 5.0G 91G 6% / tmpfs 494M 176K 494M 1% /dev/shm /dev/sda1 485M 68M 392M 15% /boot /dev/sda5 169G 26G 135G 16% /home # partition table of /dev/sda unit: sectors /dev/sda1 : start= 2048, size= 1024000, Id=83 /dev/sda2 : start= 1026048, size=204818432, Id=83 /dev/sda3 : start=205844480, size= 8384512, Id=82 /dev/sda4 : start=214228992, size=410912768, Id= 5 /dev/sda5 : start=214231040, size=359331840, Id=83 /dev/sda6 : start=573564928, size= 51576832, Id= 7 I would like to convert sda6 to a primary partition, the reason for this it to install windows 7 starter. Many thanks for any suggestions,

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Debian can't connect to internet using LAN

  - by tampe125

  I have a headless Raspberry Pi using Debian Wheezy. I have a wifi dongle and if I connect my Raspberry using it, everything works fine: I can connect to the Internet, I can ping, I can update. However, if I get down my wifi and set up the lan interface, I lost my internet connection. I still can connect to it locally, using my laptop, but the connection doesn't exit (ie ping is not working). Some useful info: cat /etc/network/interfaces auto lo auto eth0 iface eth0 inet static address 192.168.0.105 netmask 255.255.255.0 gateway 192.168.0.1 ping www.google.com (nothing request timed out) ifconfig eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:b5:20 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1130 errors:0 dropped:0 overruns:0 frame:0 TX packets:1116 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:97223 (94.9 KiB) TX bytes:146140 (142.7 KiB) ping 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. ^C --- 192.168.0.1 ping statistics --- 19 packets transmitted, 0 received, 100% packet loss, time 18007ms cat /etc/resolv.conf nameserver 8.8.8.8 netstat -r Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 well, I think that's all... Any ideas?

  Read the article

• Clarification on signals (sighup), jobs, and the controlling terminal

  - by asolberg

  So I've read two different perspectives and I'm trying to figure out which one is right. 1) Some sources online say that signals sent from the controlling terminal are ONLY sent to the foreground process group. That means if want a process to continue running in the background when you logout it is sufficient to simply suspend the job (ctrl-Z) and resume it in the background (bg). Then you can log out and it will continue to run because SIGHUP is only sent to the foreground job. See: http://blog.nelhage.com/2010/01/a-brief-introduction-to-termios-signaling-and-job-control/ ...In addition, if any signal-generating character is read by a terminal, it generates the appropriate signal to the foreground process group.... 2) Other sources claim you need to use the "nohup" command at the time the program is executed, or failing that, issue a "disown" command during execution to remove it from the jobs table that listens for SIGHUP. They say if you don't do this when you logout your process will also exit even if its running in a background process group. For example: http://docstore.mik.ua/orelly/unix3/upt/ch23_11.htm ...If I log out anyway, the shell sends my background job a HUP signal... In my own experiments with Ubuntu linux it seems like 1) is correct. I executed a command: "sleep 20 &" then logged out, logged back in and pressed did a "ps aux". Sure enough the sleep command was still running. So then why is it that so many people seem to believe number 2? And if all you have to do is place a job in the background to keep it running why do so many people use "nohup" and "disown?"

  Read the article

• MAMP MySQL won't start

  - by Tony

  I uninstalled MAMP completely, downloaded fresh copy of MAMP 2 from the MAMP website, did a clean install. However, when I try to start mysql, I get the following error log 111120 21:37:49 mysqld_safe Starting mysqld daemon with databases from /Applications/MAMP/db/mysql 111120 21:37:50 [Warning] You have forced lower_case_table_names to 0 through a command-line option, even though your file system '/Applications/MAMP/db/mysql/' is case insensitive. This means that you can corrupt a MyISAM table by accessing it with different cases. You should consider changing lower_case_table_names to 1 or 2 111120 21:37:50 [Note] Plugin 'FEDERATED' is disabled. 111120 21:37:50 InnoDB: The InnoDB memory heap is disabled 111120 21:37:50 InnoDB: Mutexes and rw_locks use GCC atomic builtins 111120 21:37:50 InnoDB: Compressed tables use zlib 1.2.3 111120 21:37:50 InnoDB: Initializing buffer pool, size = 128.0M 111120 21:37:50 InnoDB: Completed initialization of buffer pool 111120 21:37:50 InnoDB: highest supported file format is Barracuda. 111120 21:37:50 InnoDB: Waiting for the background threads to start 111120 21:37:51 InnoDB: 1.1.5 started; log sequence number 1595675 111120 21:37:51 [ERROR] /Applications/MAMP/Library/bin/mysqld: unknown option '--skip-locking' 111120 21:37:51 [ERROR] Aborting 111120 21:37:51 InnoDB: Starting shutdown... 111120 21:37:51 InnoDB: Shutdown completed; log sequence number 1595675 111120 21:37:51 [Note] /Applications/MAMP/Library/bin/mysqld: Shutdown complete 111120 21:37:51 mysqld_safe mysqld from pid file /Applications/MAMP/tmp/mysql/mysql.pid ended I've no clue why this is happening. I googled around and made sure that no instance of MySQL is running. Nothing seems to help.

  Read the article

• Disk Partitioning problem with fdisk.

  - by MA1

  Currently i am using fdisk to create/resize windows partitions. Following is a sample input script to fdisk to create/resize windows partitions: fdisk /dev/sda < partInput the contents of partInput are as follows: d #delete the partition 3 #partition number to be deleted n #add a new partition p #primary: type of new partition 3 #new partition number 18804 #start cylinder of new partition 77433 #end cylinder of new partition t #change the type of partition 3 #partition number whose type(filesystem) is to be changed 7 #HPFS/NTFS: partition type(filesystem) n #add a new partition p #primary: type of partition 77434 #first cylinder of new partition 77825 #end cylinder new partition w #write all the above changes As you see in the above input we are using cylinders for start and end. Earlier i am using sectors as unit and everything is working fine but getting problems when partitioning a 1.5TB hard drive. Then i changed the unit to cylinders but it is working on some machines not all. On some machines fdisk failed to create the partition table correctly. So, i am thinking to move to parted if there is no way to do the above using fdisk. Please also tell me how to correctly convert sectors to cylinders? How to perform all the above steps using parted without losing the data OR how to use fdisk correctly?

  Read the article

• Bypassing SQUID on freebsd with PF

  - by epema

  I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

  Read the article

• PC can't detect second RAM installed

  - by kulwinder

  I have PC with 512 MB RAM installed (motherboard manufacture MICRO STAR, chipset P4M800), pc was running very slow so I decided to upgrade the ram. I installed CPU-Z and check the ram installed on the machine, also had a look at the stick installed. 512 MB PC 3200 400 MHz DDR but my mother supports 200 MHz and it was working ok. So I bought 2GB which I checked on manual that it support upto 2 GB Ram. So I installed 2GB PC 3200 400 MHz same as the old one, I plugged in both eventhough motherboard only support upto 2 GB but system spec only shows 512 (deducts 64 MB shared vga memory) I checked on CPU-Z, it detects both, slot 1 512 MB, slot 2 2048 MB, comparing screen for both slots, both the same, volt 2.5, frequency 166 MHz and 200MHz, only difference on those is 2gb ram shows under timings table 133MHz 166 MHz and 200MHz but 512 MB shows only 166MHz and 200MHz. I checked on Google and can't seems to figure out whats wrong with it. If I only plug in 2GB. Pc doesn't boot up like ram not working.With only 512 MB plugged in seems ok. Please help.

  Read the article

• Get Internal IP Address From DHCP Hostname

  - by ell

  I would like to try and get an internal ip address of one of the computers on my network. The reason for this is I have a little home server box downstairs but every time I want to SSH into it I have to open my router configuration and go on the DHCP client table and look at the IP address. For example I would like to be able to go ssh ell-sever instead of ssh 192.168.1.105 or whatever it happens to be. My network configuration is like so: Router downstairs that is connected to the Internet and is running a DHCP server My server computer (ell-server) is a headless pc connected to the router via ethernet cable. Running Ubuntu 11.04 Server Edition My laptop upstairs (ell-laptop) that is running Ubuntu 11.10 Desktop Edition connected wirelessly Other (irrelevant) computers - 2 x Windows XP, 1 x Xubuntu - all connected with cables. (It seemed to me the method of connection isn't useful information but I put it in anyway - just in case. If I have missed any information please tell me) Do I have to run a DNS server on one of my computers? If so which one? And does that mean I will have to run a DDNS client on each computer? Thanks in advance, ell.

  Read the article

• Natting trafic from a tunnel to internet

  - by mezgani

  I'm trying to set up a GRE tunnel between a linux box and a router (LAN), and I'm having a few problems which seem to depend to my iptables configuration. Watching with tcpdump on linux box, I can see packets coming with flags GREv0, all i need right know is forwarding this data to internet, found here some trace : iptables -F iptables -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t nat -X iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -F iptables -t mangle -X iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -o cloud -j ACCEPT iptables -A FORWARD -i cloud -o ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE echo "1" /proc/sys/net/ipv4/ip_forward cloud Link encap:UNSPEC HWaddr C4-CE-7A-2E-F2-BF-DD-C0-00-00-00-00-00-00-00-00 inet adr:10.3.3.3 P-t-P:10.3.3.3 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 B) TX bytes:10416 (10.1 KiB) Table de routage IP du noyau Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface 196.206.120.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.3.0 0.0.0.0 255.255.255.0 U 0 0 0 cloud 0.0.0.0 196.206.120.1 0.0.0.0 UG 0 0 0 ppp0 root@aldebaran:~# ip route 196.206.120.1 dev ppp0 proto kernel scope link src 196.206.122.46 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.18 10.3.3.0/24 dev cloud scope link default via 196.206.120.1 dev ppp0

  Read the article

• Dual-booting Ubuntu and Pardus with GRUB2...Pardus no show?

  - by Ibn Ali al-Turki

  I have Ubuntu 10.10 installed and used to dual-boot Fedora, but I replaced Fedora with Pardus. After the install, I went into ubuntu, and did a sudo update-grub. It detected my Pardus 2011 install there. When I rebooted, it did not show up in my grub2 menu however. I went back to Ubuntu and did it again...then checked the grub.cfg, and it is not there. I have read that Pardus uses a grub legacy. How can I get Pardus into my grub2 menu? Thanks! sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd9b3496e Device Boot Start End Blocks Id System /dev/sda1 * 1 15197 122067968 83 Linux /dev/sda2 36394 60802 196059757 5 Extended /dev/sda3 15197 30394 122067968 83 Linux /dev/sda5 36394 59434 185075308 7 HPFS/NTFS /dev/sda6 59434 60802 10983424 82 Linux swap / Solaris Partition table entries are not in disk order and update-grub Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic Found memtest86+ image: /boot/memtest86+.bin Found Pardus 2011 (2011) on /dev/sda3 Yet after this, I go to grub.cfg, and Pardus is not there.

  Read the article

• Can't seem to stop Postfix backscatter

  - by Ian

  I've just migrated to a Postfix system and can't seem to stop the backscatter messages to unknown addresses on the site. I have a file, validrcpt, that lists all the valid emails on the site - about eight of them. Yet when a message is sent to a non-existent address, instead of just dropping it, postfix is replying with a "Recipient address rejected: User unknown in virtual mailbox table" email. Do I have something set wrong? I've read http://www.postfix.org/BACKSCATTER_README.html but unless I'm caffeine deficient, I don't see what's happening and perhaps I'm just to used to my old qmail setup. Here's postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = smtp-amavis:[127.0.0.1]:10024 home_mailbox = Maildir/ inet_interfaces = all inet_protocols = ipv4 local_recipient_maps = hash:/etc/postfix/validrcpt mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/dovecot.conf -m "${EXTENSION}" mailbox_size_limit = 0 mydestination = localhost myhostname = localhost mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname policy-spf_time_limit = 3600s readme_directory = no recipient_bcc_maps = hash:/etc/postfix/recipient_bcc recipient_delimiter = + relay_recipient_maps = hash:/etc/postfix/relay_recipients relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination,check_policy_service unix:private/policy-spf,reject_rbl_client zen.spamhaus.org,reject_rbl_client bl.spamcop.net,reject_rbl_client cbl.abuseat.org,check_policy_service inet:127.0.0.1:10023 smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = reject_unknown_sender_domain smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/dovecot/dovecot.pem smtpd_tls_key_file = /etc/dovecot/private/dovecot.pem smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = digitalhit.com virtual_mailbox_maps = hash:/etc/postfix/vmaps virtual_minimum_uid = 1000 virtual_uid_maps = static:5000

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  Hi, partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• SQL Error (1064) when importing data from SQL file

  - by mejpark

  I have a MySQL database, which was originally set up with the default latin1 character set and latin1_swedish_ci collation. I was using the database like this for sometime, until I noticed strange characters on my production web site, which is powered by a database exported from my development machine. At this point, I changed the default character set of the database and tables to utf8 and the collation to utf8_unicode_ci, converted the latin1 data inside each table to utf8 (using the 'convert data' option) and exported the database as a single SQL file using HeidiSQL. When the resulting SQL file is opened in Notepad++, several characters are rendered incorrectly. For example, en dashes (-) are displayed as – and e with accent (é) are displayed as é. I changed the encoding of the file from ANSI to UTF-8 (using the encoding menu option in Notepad++) and the offending characters are rendered correctly. I saved the new utf8-encoded SQL file and attempted to import the contents into the MySQL database on my production server. The import process fails with following error: /* SQL Error (1064): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '?# -------------------------------------------------------- # Host: ' at line 1 */ /* Error with snippets directory: The specified path was not found */ The head of the SQL file: # -------------------------------------------------------- # Host: 127.0.0.1 # Server version: 5.1.33-community # Server OS: Win32 # HeidiSQL version: 6.0.0.3773 # Date/time: 2011-04-20 09:48:36 # -------------------------------------------------------- It chokes on the first line of the file, which is commented out. Why is this happening? I didn't have a problem loading data from SQL files until I changed the character set and collation of the database. I came up with an ugly workaround to this problem by performing following steps: Export database as single SQL file using HeidiSQL Open resulting file in Notepad++ and convert from ANSI to UTF-8 encoding Create new empty file in Notepad++, paste in UTF-8 and save file normally What am I missing here?

  Read the article

• Unable to ping gateway via bridge nic

  - by Ara

  I'm trying to install KVM on Ubuntu 12.04 server. We have multiple nic on this server of which we primarily use eth0. The server network runs fine(i'm able to ping gateway, ping dns server and ping servers on internet) with eth0 /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local I installed bridge-utils and configured br0 as below /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off Post which i'm able to ping servers on the same ip range 192.168.22.2-254 except for 192.168.22.1 (which is the gateway) also i'm not able to ping any other servers. I'm not able to ping this machine from network. The output for route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.22.1 0.0.0.0 UG 100 0 0 br0 192.168.22.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 I've been struggling with this issue for past 5 days, would be of help if anyone can point me in the right direction to fix this issue. Thanks in advance

  Read the article

< Previous Page | 851 852 853 854 855 856 857 858 859 860 861 862  | Next Page >