Search Results

Search found 30569 results on 1223 pages for 'computer problems'.

Page 86/1223 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Computer wakes itself few seconds after hibernation

  - by Juan Zamudio

  Hi all, this is the situation, this is a Dell Optiplex 755, I recently upgraded it to Windows 7 64 bits, it had Windows XP SP3 previously, on XP I never had a problem hibernating the PC, now with Windows 7 64 every time I hibernate the PC it wakes it self after 5 or so seconds. Here are the steps I already tried: On Windows 7 I enabled the hibernation following this steps In the MoBo the sleep settings are on S3 In the Mobo I disable remote wake ups I have disabled the remote wake up in the NIC When I run the lastwake command I get unknown device or something like that I already disable the wake timers on Windows I have the latest drivers from Intel, but I just found out that in the device Manager I get a warning sign on the "Intel AMT SOL (COM3)" device saying that it failed and windows stopped the device, I reinstalled the Intel drivers but nothing changed. The only thing that I haven't touch is Intel ME in the MoBo but I don't if that could help and what settings are correct. Thanks for you help.

  Read the article

• New build won't boot: some fans turning, no beep or video

  - by Dave

  When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

  Read the article

• Sudden problems with iptables not running

  - by Fourjays

  I've got a sudden issue with iptables not running on my CentOS 5.8/DirectAdmin XenVPS. All I have done today is install PHP APC and run an update (although I admittedly didn't pay much attention today - I usually do). Iptables has been running fairly smoothly since I installed it over 6 months ago. Basically when I try to run iptables -L it tells me: iptables v1.3.5: can't initialize iptables table `filter': iptables who? (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. I've looked around and tried a few things and it appears that maybe my kernel doesn't have the modules loaded? I've been reading this and tried the two commands they suggest to no avail. Except there does appear to be a mismatch on one bit of output: -bash-3.2# cd /lib/modules -bash-3.2# ls 2.6.18-194.32.1.el5xen 2.6.18-238.5.1.el5xen 2.6.18-274.7.1.el5xen 2.6.39.1-cs-domU 2.6.18-238.12.1.el5xen 2.6.18-238.9.1.el5xen 2.6.37.2-cs-domU 3.0.1-cs-domU -bash-3.2# depmod -a WARNING: Couldn't open directory /lib/modules/2.6.18-274.18.1.el5xen: No such file or directory FATAL: Could not open /lib/modules/2.6.18-274.18.1.el5xen/modules.dep.temp for writing: No such file or directory Does this mean the versions are out of sync? If so, what are my next steps to getting this fixed? As you can probably tell I am still learning how to manage my server so please be very clear in all advice. Many thanks :)

  Read the article

• After upgrade to Lucid, computer doesn't respond to clicks or pressed keys until X restart

  - by Victor Stanciu

  I upgraded to Lucid today, and after the update the display is "frozen". I can move the cursor, but I cannot click on anything, nor does it respond to any keys. The only way to fix it is to SSH into the machine (which, by the way, works just fine), and kill and start X. Then I'm taken back to the login screen and everything works. This happens every time I boot. Let me know if there are more details that I can provide.

  Read the article

• Problems Installing slapd On Ubuntu Server 11.10

  - by Zach Dziura

  I know that there's a Ubuntu-specific StackExchange website, but I thought that I'd ask here because it's a server-specific question. If I'm wrong in my logic... Well, you people are better at this than I am! O=) On with the show! I'm in the process of installing Oracle Database 11g R2 Standard Edition onto Ubuntu Server 11.10. I found a guide on the Oracle Support Forums that walks you through the process fairly easily. Unfortunately, I'm running into issues installing one particular dependency: slapd. When I go to install it, I get this error message: (Reading database ... 64726 files and directories currently installed.) Unpacking slapd (from .../slapd_2.4.25-1.1ubuntu4.1_amd64.deb) ... Processing triggers for man-db ... Processing triggers for ufw ... Processing triggers for ureadahead ... Setting up slapd (2.4.25-1.1ubuntu4.1) ... Usage: slappasswd [options] -c format crypt(3) salt format -g generate random password -h hash password scheme -n omit trailing newline -s secret new password -u generate RFC2307 values (default) -v increase verbosity -T file read file for new password Creating initial configuration... Loading the initial configuration from the ldif file () failed with the following error while running slapadd: str2entry: invalid value for attributeType olcRootPW #0 (syntax 1.3.6.1.4.1.1466.115.121.1.15) slapadd: could not parse entry (line=1051) dpkg: error processing slapd (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: slapd E: Sub-process /usr/bin/dpkg returned an error code (1) After much Google searches and forum trolling, I have yet to find a definitive answer as to what's going wrong. The error messages seem straight forward enough, but I have no idea how to debug this. Can anyone offer some assistance? Again, if I'm asking in the wrong place, I apologize. If I'm indeed asking properly, then thank you for any and all help!

  Read the article

• Shortcut to "printer and faxes" on another computer

  - by Doltknuckle

  I have a print server running windows server 2008 that has about 50 printers on it. In windows XP, I was able to connect to the server using the UNC name and make a shortcut to the "printers and faxes" folder. (For the record, I know that it really isn't a folder, but that's outside the scope of this question.) I have recently switched to windows 7 and I find that the jump lists are really useful. One of the things I want to do is make it easy to connect to that server's "printers and faxes" folder. I would like to use something like a shortcut that I can open and go immediately to that location. The problem is that windows 7 doesn't have a way to create a shortcut like you could in WinXP. They have a button on the toolbar that says "view remote printers" which sends you to the correct folder. I'd like to avoid having to type out the server name. I also can't use the "view network" link in windows explorer. Our organization has over 6,000 machines and viewing the network lists all of them. This is all about saving time by using the minimum number of mouse clicks and key presses in normal operation. Does anyone have any suggestions?

  Read the article

• Did I miss anything when checking for passwords? [migrated]

  - by Keltari

  There's a bit of a story to this, so bear with me... I am looking for a new job and came across a posting for a computer forensics position. Its not really my field, but I thought I would apply anyway, just for fun. To make a longer story shorter, they want you to uncover as many passwords as you can find. I downloaded an image and dd'd it to a thumbdrive. The only thing visible was a text file, which contained a password. I knew there had to be more, so I used an undelete utility and found 2 deleted files. First there was another text file with a password - easy. The other was a .pst file which I mounted into outlook. There were some emails with passwords, as well as an email with an image. Another email has a link to a stegenography site. Obviously, there was a file hidden in the image, so I went to the website and downloaded the stegenography decoder. I had to try some of the passwords I had found to get the file to decrypt, and sure enough, there was another text file with a password. I called it a day at that point. Did I miss any other methods?

  Read the article

• Problems forwarding port 3306 on iptables with CentOS

  - by BoDiE2003

  Im trying to add a forward to the mysql server at 200.58.126.52 to allow the access from 200.58.125.39, and Im using the following rules (its my whole iptables of the VPS of my hosting). I can connect locally at the server that holds the mysql service as localhost, but not from outside. Can someone check if the following rules are fine? Thank you # Firewall configuration written by system-config-securitylevel # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp -s 200.58.125.39 --dport 3306 -j ACCEPT -A INPUT -p tcp -s 200.58.125.39 --sport 1024:65535 -d localhost --dport 3306 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp -s localhost --sport 3306 -d 200.58.125.39 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT COMMIT And this is the output of the connection trial. [root@qwhosti /home/qwhosti/public_html/admin/config] # mysql -u user_db -p -h 200.58.126.52 Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '200.58.126.52' (113)

  Read the article

• Performance problems on RDC to our Terminal-Server Win2008 R2

  - by user40021

  Hello, we have a new win2008-R2 (2x Xeon X5570, 32GB RAM). There I have installed the terminal-server roles, thats all OK. Currently 5 users are working at this server, but all get a very low performance in their remote-desktop session. Sometime it takes 1-2 seconds till the keyboard-inputs will be performed and shown. At the clients I run RDP v 6.1 We have also an older TS-server (based on Win2003 with an Opteron-CPU), there are working about 20 users at the same time. There I do not have the troubles with the inputs at the remote-desktop sessions. Both servers are connected to the same gigabit-switch. Any ideas what could cause the troubles at the Win2008 R2? Many thanks in advance. Regards Chris

  Read the article

• SQL Server maintenance tasks cannot run after changing computer name

  - by Gatura

  I am having a problem performing maintenance tasks on Microsoft SQL Server 2008 after changing my server name from the original random name given during installation to the one I prefer This is the error am getting Could not obtain Information about Windows NT group/users 'WIN-4N4A9TLBGJJ\Administrator', error code 0x534 Is there a way I can fix this problem without having to delete the account and recreating it again?

  Read the article

• Problems with webcame

  - by Murtaza

  My friends is using windows 8.1 and he has a webcam. He says it is working very well even without installing drivers. Webcam is A4tech - PK-331F. I asked for this webcam for use. I plugged that that webcam and windows detected it and installed drivers automatically. Then I opened Skype for checking webcam. I got massage on top of Skype that "your webcam has microphone" when I clicked over it, it directed me to sound settings where I microphone of webcam was working. I went to videos settings but webcam wasn't listed their. As you can see in image. Webcam is listed in device manager but isn't listed in Skype. I am also using windows 7 professional. Any idea why it is happening?

  Read the article

• attach two hdds to a computer having 500W smps

  - by Gaurav Sharma

  I have a desktop system installed with a 250 GB hdd (seagate sata II) this system is having a power supply of 500W (not sure if it is 650W but not more than that) the power supply is a local brand. Will it be safe to attach a second 250 GB sata II hdd on the same system. Safe in the sense that the system may not fall short of power at any time. My system's config is as follows Core2Duo processor Mercury cabinet having an additional fan (small one) sata dvd writer 52X windows xp sp 2 ASUS motherboard (intel G965 express chipset) If the above specified power supply is not sufficient for above configuration of system then please suggest the appropriate power supply (including watts)

  Read the article

• Browsing \\computer\share fails, but net use \\computer\share works?

  - by JMD

  I've had mixed results with using Windows Explorer to browse remote file shares. The setup: I'm at work on Windows XP SP3 Files are at home on Windows XP SP3 Two separate VPNs are available to access my PC at home corporate OpenVPN (10.1.2.3) a Hamachi/LogMeIn connection (5.1.2.3) With respect to my problem, it doesn't matter which IP I use. They both perform exactly the same way: I expect that if I open Windows Explorer and type in \\10.1.2.3\Shared I should be interrupted with a challenge for credentials, and then be able to interact with the files in the share. However, I just get that annoying dialog, "Windows cannot find '\10.1.2.3\Shared' Check the spelling and try again, or try searching for the item ..." However, I can take that exact same computername/sharename and with net use I can: net use * \\10.1.2.3\Shared * /user:homecomputername\username with this result: Type the password for \\5.69.83.158\C$: Drive Z: is now connected to \\5.69.83.158\C$. The command completed successfully. I can then access the files in Z: in Windows Explorer which was my original intent. Even after Z: is already mapped and the credentials are cached I still cannot bring up \\10.1.2.3\Shared in Windows Explorer. Why does the latter work, but not the former? Edit: Other services work fine, such as RDP. (I have a problem in which I can't SSH home, but I'll consider that separately.)

  Read the article

• Gigabyte GA-Z77X-D3H MB problems

  - by Hans

  I installed a new system last week. I've some issues with it. The system consists of a: Gigabyte GA-Z77X-D3H with F9 BIOS (latest) Intel Core i5 3570K proccesor Sapphire Radeon HD7850 2x 8GB Corsair 1600MHz memory OCZ Vertex 2 120G SSD Connected peripherals : 2 Samsung 940BF (1 via DVI on GFX card, 1 via an Displayport to DVI adapter) 1 Dell U2312HM monitor (displayport) Dell USB Hub (monitor) Wired mouse, wireless keyboard (logitech) Logitch G25 wheel Canon MP800 printer Okay, my issues are the following: if I plug in 1 or more monitor at DisplayPort during boot, most of the time it won't boot properly. I get an empty message screen of UEFI: only the header GIGABYTE DUEL BIOS appears. The system reboots itself, turns on for a few seconds (no video) and then reboots again. Now it starts all over again. This repeats until I remove all displayport monitors. Windows boots, and I can use them when I replug them. The graphics card has been running fine for a few weeks on an older system (intel Q6600). Another issue is; if I plug in my G25 steering wheel, the UEFI BIOS is inaccessible. It either gives the same empty UEFI screen, or the BIOS screen is rendering but crashes half way (so pieces of text and graphics are missing, and it has crashed). If I remove the G25, all is fine. To verify the graphics card is OK and the motherboard is causing these issues, I tried an NVIDIA 8800GT graphics card. This hasn't got Displayport, but it also cannot boot the BIOS with the G25 wheel plugged in. The PC also refuses to go into or out of standby. It just hangs when going into standby, and in other occasions (when it does succesfully do so) get out of standby. Power supply is OCZ StealthXStream 600W. Proccesor is 25 - 30C idle, ~55C stressed (Scythe Mugen 2). I am really puzzled what can be done to resolve this. I am not really waiting for an RMA request (otherwise I will return the MB for another type), because it will likely mean I have to wait very long before I get a replacement. Anyone else with a similar experience on this board/chipset or can help me troubleshoot this?

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• Problems when pasting Outlook 2010 signature logo into message body

  - by Austin ''Danger'' Powers

  Whenever I paste my company logo into a message in Outlook 2010, I run into a variety of complications and anomalies. The dimensions of my original logo image are 315x174 (source image is a PNG file). I am scaling this image down in Photoshop CS6 to a variety of smaller sizes for testing my Outlook signature (300x166, 250x138, 200x110,150x83 and 100x55 pixels). 300x166 = no distortion. This looks the same as in Photoshop (but far too large to use in my signature). 250x130 = distorted (gets stretched much wider by Outlook when pasting into message body). 200x110 = looks reasonable, but seems to have been scaled to a different size (smaller) by Outlook for no obvious reason. 150x83 = for some reason, this is scaled by Outlook to the exact same size that 200x110 was scaled to. In fact, a large range of similar dimensions are scaled to the exact same image size by Outlook. This is very frustrating. Why is this happening and what can be done to prevent it? 100x55 = when pasting my logo from Photoshop to Outlook with these dimensions all that happens is the cursor jumps forwards about an inch on the screen, leaving a blank space where the image was supposed to go. Any advice would be much appreciated.

  Read the article

• Lock down computer when on a domain

  - by Chad Moran

  Is there a way to disable all users except your user from logging into your PC when you're part of a Windows Server 2008 Active Directory domain?

  Read the article

• Kindle for PC - page loading problems

  - by Andrew Heath

  When viewing books in Kindle for PC, often going to the next page will change the line count at the bottom of the screen but not refresh the page view. Then, if you hit next again, you end up on the next next page (+2 rather than +1). This happens to me going backwards as well. Using arrow keys, or mouse clicks, or page down/up all creates this error. There doesn't seem to be any pattern to the occurrence other than "frequently". It happens on my Win7 64 bit and Win XP machines. I've only one Kindle book at the moment, PHP Object-Oriented Solutions by David Powers, so I suppose it could be a problem specific to that book. Does anyone else have this issue? It is extremely irritating to be constantly flipping back and forth just to get the page view to show the proper page.

  Read the article

• Lighttpd with FastCGI configuration running ViewVC - rewrite problems

  - by 0xC0000022L

  At the moment I am struggling with the configuration of lighttpd together with ViewVC. The configuration was ported from Apache 2.2.x, which is still running on the machine, serving the WebDAV/SVN stuff, being proxied through. Now, the problem I am having appears to be with the rewrite rules and I'm not really sure what I am missing here. Here's my configuration (slightly condensed to keep it concise): var.hgwebfcgi = "/var/www/vcs/bin/hgweb.fcgi" var.viewvcfcgi = "/var/www/vcs/bin/wsgi/viewvc.fcgi" var.viewvcstatic = "/var/www/vcs/templates/docroot" var.vcs_errorlog = "/var/log/lighttpd/error.log" var.vcs_accesslog = "/var/log/lighttpd/access.log" $HTTP["host"] =~ "domain.tld" { $SERVER["socket"] == ":443" { protocol = "https://" ssl.engine = "enable" ssl.pemfile = "/etc/lighttpd/ssl/..." ssl.ca-file = "/etc/lighttpd/ssl/..." ssl.use-sslv2 = "disable" setenv.add-environment = ( "HTTPS" => "on" ) url.rewrite-once += ("^/mercurial$" => "/mercurial/" ) url.rewrite-once += ("^/$" => "/viewvc.fcgi" ) alias.url += ( "/viewvc-static" => var.viewvcstatic ) alias.url += ( "/robots.txt" => var.robots ) alias.url += ( "/favicon.ico" => var.favicon ) alias.url += ( "/mercurial" => var.hgwebfcgi ) alias.url += ( "/viewvc.fcgi" => var.viewvcfcgi ) $HTTP["url"] =~ "^/mercurial" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.hgwebfcgi, "socket" => "/tmp/hgwebdir.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } else $HTTP["url"] =~ "^/viewvc\.fcgi" { fastcgi.server += ( ".fcgi" => ( ( "bin-path" => var.viewvcfcgi, "socket" => "/tmp/viewvc.sock", "min-procs" => 1, "max-procs" => 5 ) ) ) } expire.url = ( "/viewvc-static" => "access plus 60 days" ) server.errorlog = var.vcs_errorlog accesslog.filename = var.vcs_accesslog } } Now, when I access the domain.tld, I correctly see the index of the repositories. However, when I look at the links for each respective repository (or click them, for that matter), it's of the form https://domain.tld/viewvc.fcgi/reponame instead of the intended https://domain.tld/reponame. What do I have to change/add to achieve this? Do I have to "abuse" the index file mechanism somehow? Goal is to keep the /mercurial alias functional. So far I've tried sifting through the lighttpd book from Packt again, also through the lighttpd documentation, but found nothing that seemed to match the problem.

  Read the article

• Computer name not appearing on network

  - by stib

  I can connect to other computers on my home network (ubuntu + OSX machines) using the IP address, but I can't connect using the netbios name. On the mac the name appears in Finder but if I try to connect (goconnect to server smb://[email protected]) it doesn't work, while smb://[email protected] does. Same with ssh, ping and afp between the macs. This is a intermittent problem. It has worked in the past.

  Read the article

• Computer turns off and on after start ..then goes dead

  - by Shiki

  I built a new PC from the following components: - CPU: Intel Core i7 950 - MB: Gigabyte X58A-UD3R - RAM: 2x2gb i7 Corsair memory - VGA: Zotac AMP2 GTX260 - HDD: 1 GreenSATA HDD (Western Digital 500gb RE2) When I turn it on, it goes for a few seconds, fans at maximum speed, then turns off. The again, it starts by itself.. and goes with fans on max speed, nothing happens. First I suspected my PSU. It's a Chieftec 450AA PSU. After I borrowed a Chieftec 550AA PSU, I tried to start with that. Exact same story. Any idea ? Do I need a bigger PSU? Reason why its not localized. I never seen this turn on, off, on. If you give answer for that, it would already help people like me, with the same problem.

  Read the article

• Remote Desktop from Linux to Computer that Requires Network Level Authentication

  - by Kyle Brandt

  Is there a way to use rdesktop or another Linux client to connect to a server that requires Network Level Authentication? From Windows Server 2008 R2 -- Control Panel -- System And Security -- System -- Allow Remote Access there is an option that says "Allow connections only from computers running Remote Desktop with Network Level Authentication". So with this enabled I can con not connect from Linux. I can connect from XP but you need SP3 and I had to edit a couple of things in the registry for it to work.

  Read the article

• Brand New Monitor Won't Get Input From Computer

  - by HollerTrain

  I have an old Dell 2350. I found a HD a few months ago and plugged it in and it booted up. So I just purchased a monitor and plugged it in, and put the HD inside and connected the two connections (Bus, and a four pronged connector) and no signal is being sent to monitor. is this a monitor issue or the HD is just dead? HD is spinning. CPU is turned on :) Yet no signal.. any thoughts?

  Read the article

• Problems login ubuntu 10.10

  - by siobhan

  I recently change my compiz settings for my cube and upon restarting my pc it first black screened, where it got stuck, on this screen the last command stated that it was checking the battery status, it was like this for hours i finally got thru to the Login screen but it will not accept the password (with i know is correct). I am a novice with Ubuntu but have read and tried everything the forums have told me to do but to no avail.... Please, please, please any help would be greatly appreciated. Many thanks.

  Read the article

• Linux kernel startup problems: how to analyze?

  - by java.is.for.desktop

  Hello, everyone! After manually updating the kernel from 2.6.33 to 2.6.34 on my OpenSuse 11.2 Notebook, it stops after the message Loading drivers, configuring devices... This stop can be interrupted with Ctrl-C, but when the system enters runlevel 5, no partitions are mounted (but the root partition), many services fail to start, and other strange things are going on. No X11. NOTE: I manually updated the kernel many times before, it worked. Yes, I know, in case of NVidia, the driver has to be recompiled. The question is: How can I analyze the cause of the problem? Doing dmesg gives me soooo much output, I can't "map" it to the output which I see at startup. The output does not contain the string Loading drivers, configuring devices, or similar.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >