Search Results

Search found 26263 results on 1051 pages for 'linux guest'.

Page 862/1051 | < Previous Page | 858 859 860 861 862 863 864 865 866 867 868 869  | Next Page >

• Confirm disk is broken when it passes all diagnostics

  - by Halfgaar

  I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

  Read the article

• What language should I use for making a cross platform library?

  - by Andrei

  I want to build a SyncML parsing library (no UI) which should be able to build up messages based on information provided by the host application, fed in by the library's methods. Also, the library should to be able to do callbacks to methods in the host application. I want to be able to compile this and have it available on as many platforms as possible: Windows, Windows Phone 7 OS, OSX, iOS, Linux, Android, BlackBerry. Basically as many platforms as possible. The priority is to have this available on mobile devices. Questions: What setup should I use? (programming languages, compilers, IDE etc.) How would I compile this library for these different platforms and how would I connect to it? Any other info? e.g. articles that cover the subject of cross-platform development? I haven't done this sort of a cross-platform project before, so any available information to put me in the right direction would be welcomed. Myself, I have a background in C#/.NET and Objective-C.

  Read the article

• Newly registered domain name still doesn't show up after 72 hours.

  - by BioGeek

  Seven days ago I ordered a domain name with a local (Belgian) domain name agent. I have already webspace at a shared host in the US, so I filled in their nameservers on the form. I immediately payed with my credit card. Three days ago I received an e-mail from the domain name agent, saying that my domain name was registered with the external nameservers I provided, and that the site would be visible within 24 hours. However, 72 hours after that mail I still can't see my domain name. A whois search shows indeed that my domain is registered on my name,but a ping to the domain returns unknown host and a traceroute gives the similar Name or service not known. What can have gone wrong, and which (Linux) commands can I use to find out. Or should I just be patient and will the domain name eventually be propagated?

  Read the article

• NRPE and the $USER1$ variable

  - by timbrigham

  I have NRPE daemons running on all of my remote Linux boxes. I have a couple configurations in place and I'm trying to standardize the paths in my nrpe.cfg. The changes are deployed via Puppet. I would like to use the following syntax: command[mycommand]=$USER1$/check_tcp .. etc. The $USER1$ variable is not available in my NRPE setup. I could write Puppet templates for all the variants but I would much prefer to manage this through a native method. Is there anything available to do so? If not does anyone have a sample Puppet config that will address this?

  Read the article

• Drivers for NVIDIA 520M not working in Ubuntu 12.04

  - by Don

  I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

  Read the article

• PEN daemon as load balancer, IIS web logs not showing true requester IPs

  - by Aszurom

  I have a Hercules vmware appliance, which is a micro-linux vm that runs the PEN daemon and acts as a server load-balancer. It takes any incoming request on the appliance's IP and routes it out to a number of alternate IPs. The logs of the daemon show the true IP of the browsers hitting the website. The logs of the websites themselves (iis 6 and 7) only show the requester IP as being that of the load balancer. The IT manager tells me that when we had a hardware appliance (serveriron XL) doing the load balancing, the web logs reflected the requester IPs accurately. Is there any way to get this resolved with the daemon, or will I be digging that out of the closet and plugging it back in?

  Read the article

• error while loading shared libraries; cannot open shared object file: No such file or directory

  - by glitchyme

  The program evince complains that it can't find libfreetype.so.6; however I clearly have the file and its included in my LD_LIBRARY_PATH; furthermore I have another program which uses libfreetype6 and is able to run just fine. What's going on here? jbud@jb-pc ~> evince evince: error while loading shared libraries: libfreetype.so.6: cannot open shared object file: No such file or directory jbud@jb-pc ~> ldd /usr/bin/evince | grep freetype libfreetype.so.6 => /usr/local/lib/libfreetype.so.6 (0x00007f912179d000) jbud@jb-pc ~> file /usr/local/lib/libfreetype.so.6 /usr/local/lib/libfreetype.so.6: symbolic link to `libfreetype.so.6.11.1' jbud@jb-pc ~> file /usr/local/lib/libfreetype.so.6.11.1 /usr/local/lib/libfreetype.so.6.11.1: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, BuildID[sha1]=0x21a4b8005e0c9a42af001b35fb984f4e25efc71c, not stripped jbud@jb-pc ~> echo $LD_LIBRARY_PATH /usr/lib/:/usr/lib64/:/usr/lib/x86_64-linux-gnu/:/usr/local/lib/ jbud@jb-pc ~> ldd jdrive/jstuff/work/personal/noengine/client | grep freetype libfreetype.so.6 => /usr/local/lib/libfreetype.so.6 (0x00007feb5ac89000)

  Read the article

• running chkdsk on a disk without a drive letter

  - by neubert

  I have a hard drive that shows up in Disk Management as having two partitions. One of the partitions says 69.71GB and that's it. The other says 4.82GB and, underneath that, Healthy (OEM Partition). I'm trying to do chkdsk on the 69.71GB partition and am unsure of how to do it without a drive letter. Any ideas? It's an NTFS partition that's gotten corrupted. Linux's ntfsfix spits out a bunch of errors so I'm thinking chkdsk might be better. Thanks

  Read the article

• $TERM set to "dumb" causes problems with suspend

  - by julkiewicz

  I've just upgraded from 11.04 to 11.10. So far I love it, everything seems just so much snappier. Now I just have one minor issue. When I try to suspend my laptop, it doesn't work - instead it fades out the screen, blocks it and then instantly wakes back. I've checked the logs in /var/log/pm-suspend.log and this fragment seems relevant: /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success. Running hook /usr/lib/pm-utils/sleep.d/00clear suspend suspend: TERM environment variable not set. /usr/lib/pm-utils/sleep.d/00clear suspend suspend: Returned exit code 1. Sat Nov 19 12:23:20 CET 2011: Inhibit found, will not perform suspend Sat Nov 19 12:23:20 CET 2011: Running hooks for resume The mentioned script at /usr/lib/pm-utils/sleep.d/00clear reads: #!/bin/bash clear When I open a terminal anywhere by hand, $TERM is set to either "linux" or "xterm". However somehow when the 00clear command is executed $TERM is set to "dumb". Two questions: What is the correct value for $TERM when running 00clear script? Where can I set it up? I've looked for solutions on the web, however I could only find information on how to configure $TERM in a regular terminal (and this one is set properly).

  Read the article

• Swiftfox (Firefox variant) is taking ages to load in Debian Lenny

  - by unixbhaskar

  Swiftfox (a Firefox variant) is taking ages to load in my Debian Lenny system. I have been using Swiftfox on several other Linux distributions without any problem; it works flawlessly on Arch, Fedora, Gentoo (my other OSes). But it's giving me trouble in Debian Lenny. I haven't yet found any clue as to why. Please help me shed some light on the problem. I periodically prune the Swiftfox/Firefox internal database, and I keep it up-to-date with the latest versions available. I am confused with this problem in Debian Lenny. What should I try to troubleshoot this further? Cheers!

  Read the article

• How to start vim without executing /etc/vimrc?

  - by florin

  On my Linux server at work, the admins did not install cscope, and I installed it from source in my home directory and added it to the $PATH. The trouble is, the /etc/vimrc has a reference to /usr/bin/cscope which does not exist and everytime I start vim, it complains about that and I have to press for that message to go away. It is interesting that if I remove cscope from my $PATH, I don't get that behavior - so it is possible that vim is testing that cscope exists somewhere, and only then executing the cscope configuration - but then it gets it wrong! So my question is: can I set something up in my .vimrc so it does not source the global /etc/vimrc? I don't want to move cscope out of PATH, as I don't want to type the full directory name every time I run it from the command line.

  Read the article

• Postfix configuration problem

  - by dhanya

  Can anyone help me by giving your postfix configuration file as a reference so that I can find my mistakes? I'm working on SUSE Linux Enterprise Server. My goal is to set up a mailserver in a campus network. Postfix shows it is running but no mail is sent to var/spool/mail I send mail using mail command at terminal. Here is my main.cf file, please help me finding a solution: readme_directory = /usr/share/doc/packages/postfix-doc/README_FILES inet_protocols = all biff = no mail_spool_directory = /var/mail canonical_maps = hash:/etc/postfix/canonical virtual_alias_maps = hash:/etc/postfix/virtual virtual_alias_domains = hash:/etc/postfix/virtual relocated_maps = hash:/etc/postfix/relocated transport_maps = hash:/etc/postfix/transport sender_canonical_maps = hash:/etc/postfix/sender_canonical masquerade_exceptions = root masquerade_classes = envelope_sender, header_sender, header_recipient myhostname = cmail.cetmail delay_warning_time = 1h message_strip_characters = \0 program_directory = /usr/lib/postfix inet_interfaces = all #inet_interfaces = 127.0.0.1 masquerade_domains = cetmail mydestination = cmail.cetmail, localhost.cetmail, cetmail defer_transports = mynetworks_style = subnet disable_dns_lookups = no relayhost = postfix mailbox_command = cyrus mailbox_transport = strict_8bitmime = no disable_mime_output_conversion = no smtpd_sender_restrictions = hash:/etc/postfix/access smtpd_client_restrictions = smtpd_helo_required = no smtpd_helo_restrictions = strict_rfc821_envelopes = no smtpd_recipient_restrictions = permit_mynetworks,reject_unauth_destination smtp_sasl_auth_enable = no smtpd_sasl_auth_enable = no smtpd_use_tls = no smtp_use_tls = no alias_maps = hash:/etc/aliases mailbox_size_limit = 0 message_size_limit = 10240000

  Read the article

• Using DD for disk cloning

  - by roe

  There's been a number of questions regarding disk cloning tools (yes, I did search for it) :) and dd has been suggested at least once. I've already considered using dd myself, mainly because ease of use, and that it's readily available on pretty much all run of the mill bootable linux distributions. To my question, what is the best way to use dd for cloning a disk. I don't have much time to go around, and no test-hardware to play with, so I need to be prepared, and it's pretty much a one-shoot chance to get it done. I did a quick google search, and the first result was an apparent failed attempt. Is there anything I need to do after using dd, i.e. is there anything that CAN'T be read using dd? Thanks!

  Read the article

• How to install Canon MP610 printer on Ubuntu 12.04 x64

  - by Arkadius

  I installed Ubuntu 12.04 x64. Orginal Canon drivers are only for 32-bit version. How can I install this printer in 64-bit version ? Arkadius HERE IS SOLUTION I looked for solution some time and finally found it. First I try to do it by adding repository like it is written here: http://www.iheartubuntu.com/2012/02/install-canon-printer-for-ubuntu-linux.html BUT it did NOT work. Printer was installed but every print JOB goes somewhere ( probably to /dev/null :) ) Also installing sudo apt-get install ia32-libs did NOT worked (it was already installed) Finally I found solution. NOTE I did NOT use orginal Canon drivers for 32-bit. I also removed drivers from repository: ppa:michael-gruz/canon I found solution almost at the end of this thread: http://ubuntuforums.org/showthread.php?t=1967725&page=10 Most important hint was found in Response #97 "Do NOT install any PPA" I did as follows: Removed all copies of my printer Removed Canon drivers from repository ppa:michael-gruz/canon sudo apt-get remove cnijfilter* Added new repository and installed CUPS for Canon: sudo apt-add-repository ppa:robbiew/cups-bjnp sudo apt-get update sudo apt-get install cups-bjnp Installed Gutenprint: sudo apt-get install printer-driver-gutenprint Restarted CUPS: sudo restart cups Add myself to group lp: sudo usermod -G lp -a your_user_name Added printer usings steps from link above: Don't install any PPA for the drivers. Click the Cog up in the right-hand corner and select Printers. Turn on the printer and make sure it is connected. When the Printers windows appears, click +Add and wait a few minutes. Your printer should appear within the configuration wizard. Mine did and its an Canon MX330. Click the defaults and continue on. Cups should identify your printer. I saw a few other models in the list. I was able to successfully print a test page afterwards. I hope this will also help someone else. Arkadius .

  Read the article

• Compose key on Windows

  - by Craig McQueen

  On Linux, the Compose key is a great way to enter many symbols. E.g. m-dash — by pressing Compose then --- ö by pressing Compose then :o Euro € by pressing Compose then C= (The Compose key function can be assigned to various keyboard keys, such as right/left Alt, right/left Windows key.) I really miss the Compose key when using Windows. I've looked but so far haven't found any way to get equivalent Compose key functionality on Windows. Does anyone know of how to do it?

  Read the article

• hadoop install cluster

  - by chnet

  Is it possible to run hadoop on multi-node and these nodes install hadoop on different paths? I noticed the tutorial, such as Michael Noll's, http://www.michael-noll.com/tutorials/running-hadoop-on-ubuntu-linux-multi-node-cluster/, asks hadoop to be installed on different nodes with the same installation path. I tried to run hadoop on multi-node. Each node installed hadoop on different path. But not success. I noticed that the hadoop assume installation paths are the same in default. The problem is when I execute start-dfs.sh it tries to start hadoop deamons on the salve nodes from the same path as on master. "Whereas the installation path is different. Were the relevant files modified to reflect the installed locations on each node"? Which file I should modify to reflect the installed locations on each node?

  Read the article

• Dell Latitude will not boot after fresh Ubuntu 12.10 installation. Black screen

  - by James

  I have an old dell latitude d610 that I've just installed ubuntu 12.10 onto, and now unfortunately it will not complete booting up. The screen flashes purple but then fades out and dies. I'm fairly sure there is an issue with graphics drivers, as I had to turn on "nomodeset" in the options when installing off a DVD to see the installer, but I'm very new to linux and don't know terribly much at all apart from what I've read on the net. I have been able to hold down shift and bring up GRUB, and entered into recovery mode, and when I enter into the low graphics mode, the xserver log file says it can detect a screen but found none with a useable configuration, then goes on to say a fatal server error has occurred and no screen have been found at all, telling me to check a log file at "/var/log/xorg.0.log" I have no idea how to check this specific log file! Attempting to actually go further than this in low graphics mode and restart the display simply artefacts the screen. It is all very strange and annoying because I did once by random have the machine boot completely for no apparent reason, but upon restarting the issue reoccurred.

  Read the article

• Problem running mercurial against symlinked .hgrc file under Cygwin/Windows 7

  - by emptyset

  This is not a question about handling symlinks in the mercurial repository. I have this setup at work where I keep my dotfiles in a separate directory (.configuration) that I can use to synch my dotfiles between cygwin/windows and linux, then use symlinks instead of dotfiles in the home directory. So, I have the symlink ~/.hgrc -> .configuration/.hgrc in my home directory. After setting this up, mercurial complains thus: $ hg st hg: config error at C:\Users\aaf\.hgrc:1: '!<symlink>ÿþ.configuration/.hgrc' Removing the symlink and replacing it with the actual file works, so the contents of the .hgrc file are not at fault. I can live with that, I suppose, but I'd like to know why this happens. All other tools I've configured the same way work great with symlinked dotfiles.

  Read the article

• Using NDMP as an alternative to CIFS mount

  - by user138922

  I have a weird but interesting use-case. I use CIFS to mount shares from a File Server (NetApp, EMC etc) to an application server (win/linux server where my application runs). My application needs to process each of the file from the shares that I mount via CIFS. My application also needs access to the meta-data of these files such as Name, Size, ACLs etc. I would like to see if I can achieve the same via NDMP. I have some very basic questions regarding this use-case. It would be great if you guys can help me out here. Is this even something which is achievable? Can I just transfer share that interest me instead of entire volume?

  Read the article

• does vmware server needs bare metal or can be installed on an existing OS

  - by Registered User

  I am new to virtual stuff on Vmware sort of environment.I am basically testing Vmware and its various things for our needs.I have a linux 64 bit laptop.I want to know 1) The Vmware server can it be installed in this existing OS or I need to have baremetal installation for this? 2) What is the advantage of using Vmware Server on Vmware workstation ? 3) What is the use of ESX server of vmware? I have seen some alternatives like Xen which one is better Xen or Vmware might be a debatable issue but my questions for Xen are also same I checked Citrix website. 1) I see similar products for Xen What is the advantage of using Xen Server on Xen desktop ?

  Read the article

• Gett Tor and Irssi working together

  - by Joey Bagodonuts

  Hi I am trying to get Tor working with Irssi. The directions at the bottom of this page Freenode Install Link say to :~/.irssi$ tor MapAddress 10.40.40.40 p4fsi4ockecnea7l.onion Feb 12 04:26:51.101 [notice] Tor v0.2.1.29 (r318f470bc5f2ad43). This is experimental software. Do not rely on it for strong anonymity. (Running on Linux x86_64) Feb 12 04:26:51.101 [warn] Command-line option 'p4fsi4ockecnea7l.onion' with no value. Failing. Feb 12 04:26:51.101 [err] Reading config failed--see warnings above. Or add it to the torrc file and reload irssi .irssi$ cat /etc/tor/torrc |grep 10.40.40 mapaddress 10.40.40.40 p4fsi4ockecnea7l.onion This is a paste from within irssi after running $torify irssi [04:33] Math::BigInt: couldn't load specified math lib(s), fallback to Math::BigInt::FastCalc at /usr/local/share/perl/5.10.1/Crypt/DH.pm line 6 [04:33] [04:33] *** Irssi: Loaded script cap_sasl So I thought it was a CPAN module issue. cpan[1]> install Math::BigInt This was also done for FastCalc and retried with force install. What am I doing wrong? Thanks

  Read the article

• Amazon EC2 Creating Tunnel with OpenVPN

  - by nocode

  I have followed these instructions: http://aws.amazon.com/articles/0639686206802544 I can ping the VPN endpoints and I have the corresponding VPC CIDR pointing to the EC2 instance in the route table. Here is my config: port 1194 proto udp dev tun # Remote peer and network remote Elastic_IP route 10.0.0.0/16 # Configure local and remote VPN endpoints ifconfig 169.254.255.1 169.254.255.2 # The pre-shared static key secret /etc/openvpn/ovpn.key keepalive 10 120 persist-key persist-tun log /var/log/openvpn.log verb 3 When I look at my logs, I get this error: RESOLVE: Cannot resolve host address: 10.0.0.0/16: Name or service not known OpenVPN ROUTE: failed to parse/resolve route for host/network: 10.0.0.0/16 in VPC1, the CIDR is 172.31.0.0/16 which is targeting the EC2 instance also running OpenVPN. I'm getting the same error from the Instance in VPC2 with the corresponding CIDR. Just for testing, i stopped the IPTABLES service I am running the Amazon linux AMI image (x64) as specified in the article I linked.

  Read the article

• Questions about adding space to an Amazon EC2 Instance

  - by Misha

  I have an Amazon EC2 instance that is running a simple LAMP stack with Amazon's flavor of linux. I want to stop it and add more disk space. We will need more than our current 8 gigabytes. I was wondering: 1) When I stop my instance what will be lost? Will the content of /var/www be lost? What does this mean? I am sure my instance isn't a spot instance. 1.5) What is an ephemeral disk? Is my instance completely ephemeral? Are parts of it ephemeral? When I press "stop", probably, not everything is cleared. So what is cleared? 2) Amazon has tools in the Management Console to facilitate enlarging an instance? 3) Will I have to re-partition the instance? Can an instance expand the partition it is running on?

  Read the article

• Running Mac OSX 10.6 my users home directory is wrong

  - by Erik Miller

  Somehow my home directory on my mac machine has been changed and I'm not sure how to go about changing it back, I'm more of a linux guy and mac has some other mechanism for storing that information. Basically when I log into the machine normally than start a terminal window. I start in the /Users/erik_miller directory, which is my home directory, but when I run some this like cd ~ The machine tries to change to /Users/erik_miller. Yes, the same path with a period on the end. I can change my $HOME environment variable for the session, but the next time I start the machine it reverts. So, I think if I can find where that information is stored I can just change it there and hopefully all will be well.

  Read the article

• best practices for setting development environment

  - by Sharique

  I use Linux as primary OS. I need some suggestions regarding how should I set up my desktop and development. I do work on mostly .Net and Drupal, but some time on other lamp products and C/C++, Qt. I'm also interested in mobile (android..) and embedded development. Currently I install everything on my main OS, even I use it a little. I use VMs a little. Should I use separate VM for each kind of development (like one for .Net/Mono, another C++, one for mobile and one for db only, one for xyz things etc) Keep primary development environment on main os and moveothers in VM. main os should be messed up keep things easy to organize (must) performance should be optimal

  Read the article

< Previous Page | 858 859 860 861 862 863 864 865 866 867 868 869  | Next Page >