Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 87/173 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• Why does gvim open session with extra/duplicate tabs?

  - by drapkin11

  I'm running gvim, have 2 files open in 2 tabs. I save the current session via the sessionman plugin by Yuri Klubakov. I close gvim (or keep gvim open but close the session, doesn't matter). When I reopen gvim and load the session, I have 3 tabs opened - two of the tabs have the same file! This is not just limited to this single session. When I open some of my other sessions, gvim opens about twice the number of tabs that I expect it to. I disabled this plugin and tried another (session by Peter Odding), but I still get the same problem. Any idea what might be going on behind the scenes?

  Read the article

• What is the command to use to put your computer to sleep (not hibernate)?

  - by airrick

  I want to put my windows pc (win7) into a sleep state via command line (so i can bind to macro button on keyboard). The power button on the PC is setup to but the computer to sleep (but it's down on the floor and I'm too lazy to reach down) it exactly how I want it (sleeps using hybrid mode in case I loose power) The sleep command on the shutdown menu also works. most info I found says to use; %windir%\system32\rundll32.exe PowrProf.dll, SetSuspendState 0,1,0 But this puts the computer in hibernate mode. I do have hibernate disabled but using hybrid sleep. So, What is the command to use to put your computer to sleep (not hibernate)?

  Read the article

• My laptop can connect to every wireless network except fios

  - by going crazy

  I have always been able to connect to every wireless router secured or unsecured wep or wpa. I had Fios installed and could not connect. Verizon suggested it was my computer and gave me an outside wirless drive to use, it worked. I got rid of fios and went back to comcast and threw out the drive, but now 2 years later, I am sitting at my friends house haveing the same problem. My tech savy friend told me it is a firewall setting or something in my antivirus software, but I disabled them both and still nothing works........Funny it is only FIOS

  Read the article

• Google Chrome in Incognito Mode still logging visits history

  - by casey_miller

  I am using Incognito Mode and today I have noticed that when I frequently visit some site in that mode browser logs it and even on not incognito mode it autofills in address bar making Incognito mode useless in my case. Another fun thing is that the item is not in History so I can't manually remove it. Couldn't find anything in Settings. Why is this happening? BTW, instant search is disabled in my case. Using the latest version to date. Extensions installed List item Send to Google Docs Google Translate Eye Dropper Delicious Readabiliy Pagespeed

  Read the article

• How do I make the Windows low memory warning less sensitive?

  - by Stephen

  I keep getting this annoying low memory warning/prompt to close games I play. It happens very often and I still have ~6 gigs of ram free. I disabled virtual memory because it was putting stuff on the pagefile when I had 10 gigs free ram so that spiked my disk usage. Is there any way to disable this warning? I have 16GB ram so it shouldn't be an issue. I would prefer to keep pagefiles off because my HD is very loud so it's nice to keep it spun down as much as possible. I don't want to disable it completely. Ideally, I would like it to go off when I have ~2GB left rather than 6, but if this isn't viable, I may just disable it completely.

  Read the article

• Why does Pages.app connect to a server through https and keep the connection open?

  - by ggustafsson

  Every time i start up the program Pages (iWork) it connects to a server through https. What is going on? Why would Apple do this? I use no features under Pages that could warrant this behaviour. It connects to IP address 2.22.240.224 on port 443 and keeps the connection open until i close the application. All the info i can get from Wireshark is a bunch of Apple-related domain names. Edit: The same thing happens with Numbers. I have disabled "Documents & Data" on iCloud so that shouldn't be the reason why. Edit 2: The programs in the iWork suite stopped doing this after recent updates so it's not an issue anymore.

  Read the article

• how can I force automatic filling to be enabled on webpages?

  - by thepaulpage

  I'm using the Chrome Browser. I enjoy the "automatic filling" that it uses to fill in things like my address when I'm shopping online. Sometimes I get a message that says: "This webpage has disabled automatic filling for this form" Is there a way that I can tell Chrome to ignore what the webpage wants and just give me what I want? I'm not talking about passwords, I'm talking about Chrome's automatic filling in of things like my email address, zip code, etc. For Example: https://www.kansas.gov/ump/register/account?

  Read the article

• Powershell and DfsrConfigurationFromAD - how to check all servers are updated?

  - by user57792

  I have two Win2012R2 servers (SERVER1 and SERVER2) that uses DFS Replication for keeping a couple of folders synchronized. Using the following Powershell-script that i run on SERVER1 I disconnect it from the group: Set-DfsrConnection -GroupName "Group1" -SourceComputerName "SERVER1" -DestinationComputerName "SERVER2" -DisableConnection $True; And to update both the servers with the configuration I run the command: Update-DfsrConfigurationFromAD -ComputerName "SERVER1","SERVER2" Now the question is, how can check on SERVER1 that SERVER2 has gotten the updated information from the AD so that I can be sure that the connection has been disabled? Usually it takes around 10-30 seconds after the Update-DfsrConfigurationFromAD command has been run before the DFS Management on SERVER2 gets updated but I need some kind of a "check and sleep loop" in my code. I've tried checking event logs and using Invoke-Command {Get-DfsrConnection} from PM-SERVER01 but nothing seems to work.

  Read the article

• Cannot access any remote resource after connecting to Cisco VPN on Vista

  - by Deepak Singh Rawat

  I have installed Cisco vpn client version 5.0.07.0290 on Vista Business SP2. I am able to successfully connnect to the vpn. But after connecting I am not able to access any resource in the vpn (like database, other computers in the network etc.). I have tried the following without any success : Older versions of the client Other vpn clients like Shrewsoft : same issue as the cisco vpn client Disabled Internet Connection Sharing service Installed the client in the root administrator account Run the installer as administrator Run the vpngui and ipsecdialer in XP compatibility mode and as administrator I am not sure how to troubleshoot this issue. Can somebody please help me in troubleshooting this issue? P.S : I've Zonealarm firewall, can that be an issue?

  Read the article

• IISRESET On IIS 6.0 failing

  - by Natasha Thapa

  I am trying to do a reset on IIS 6.0 from the command line and I get this message below, all the services are up and running, googled for a solution, tells me to reinstall IIS 6.0, which I tried so many times. Any idea what is the problem? Using windows server 2003. Attempting stop... Internet services successfully stopped Attempting start... Restart attempt failed. IIS Admin Service or a service dependent on IIS Admin is not active. It most likely failed to start, which may mean that it's disabled.

  Read the article

• no download and install progress, no error message (no text at all!) for sudo gem install merb

  - by Delirium tremens

  I'm using ruby 4.2, rubygems 1.3.5-1ubuntu2 and Ubuntu Lucid Lynx. I installed ruby and rubygems with Synaptic. Since "The gem command will output its progress while it sucks down and installs all the necessary gems for a full Merb install. " is written at http://wiki.merbivore.com/howto/installation/gems, when I type sudo gem update --system, I get: "ERROR: While executing gem ... (RuntimeError) gem update --system is disabled on Debian. RubyGems can be updated using the official Debian repositories by aptitude or apt-get." and rubygems has list, build and help commands, I'm wondering if in Ubuntu rubygems is used only for something other than downloading. If it isn't, why isn't rubygems showing any text for sudo gem install merb?

  Read the article

• Port Forwarding on Actiontec GT704-WG Router Issues

  - by adamweeks

  I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

  Read the article

• boot failure trying to install linux distro from a cd

  - by jdamae

  Hoping someone can help me get this installation from a cd going. I'm using an older pc: hp pavillion 2.66Ghz, 512RAM with a BIOS revision of 6/30/2003. I reclaimed some an older drive (Seagate ST340810A) that seems to be working as its recognized in the bios (auto-detected) I downloaded a mini.iso of ubuntu 10.10 that I want to install and burned the image to a CD for install. My boot sequence is: First Boot Device [CDROM] and I disabled devices 2-4 so I can just force it to read first from the CDROM. This old pc also has a separate CD writer which is a Sec.Slave, so the Sec.Master is the Toshiba DVD/ROM DSM-171 drive where I placed the burned cd with the linux distro. So, with these settings I cannot get it to boot. I get the "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". Where do I go from here? Thanks.

  Read the article

• One NIC going to sleep on Centos system

  - by sbleon

  I have two Dell boxes with two ethernet ports a piece. I have a cable directly connecting two of these ports, creating a tiny LAN with 10.3.3.x addresses. The other port on each box is hooked up to a switch and has a DHCP-supplied address to talk to the outside world. I've noticed that when scp'ing large files from one box to the other over the private LAN, the transfers sometimes stall. It appears that any other network activity on either box will cause the transfer to resume. Wake-on-LAN is disabled on all interfaces according to ethtool. What else could be causing these stalled transfers?

  Read the article

• IIS not listening over external network, all other traffic working

  - by Beuy

  Hello there, I have a very odd situation, I have a server (let's call it X) running 2008 R2 with two NIC's in it, one is connected to the work domain and has a subnet of 192.168.10.0/24 the other is connected to a ADSL connection and has a subnet of 192.168.1.0/24. The server has IIS installed. On the ADSL connection I have setup a dynamic dns and port forwarding to allow external HTTP, HTTPS, FTP and RDP connections. FTP and RDP are working fine however neither HTTP or HTTPS are working at all. I can browse the websites by going to localhost on the machine, the HTTP and HTTPS ports appear as "Filtered" when I try to scan them using PortQueryUI and browsers respond with a "Server took too long to load or was not responding" error. This was working fine just a few days ago, Windows firewall is disabled I don't have any software firewall on it. And I'm really lost. Any help would be great.

  Read the article

• Computer wakes itself few seconds after hibernation

  - by Juan Zamudio

  Hi all, this is the situation, this is a Dell Optiplex 755, I recently upgraded it to Windows 7 64 bits, it had Windows XP SP3 previously, on XP I never had a problem hibernating the PC, now with Windows 7 64 every time I hibernate the PC it wakes it self after 5 or so seconds. Here are the steps I already tried: On Windows 7 I enabled the hibernation following this steps In the MoBo the sleep settings are on S3 In the Mobo I disable remote wake ups I have disabled the remote wake up in the NIC When I run the lastwake command I get unknown device or something like that I already disable the wake timers on Windows I have the latest drivers from Intel, but I just found out that in the device Manager I get a warning sign on the "Intel AMT SOL (COM3)" device saying that it failed and windows stopped the device, I reinstalled the Intel drivers but nothing changed. The only thing that I haven't touch is Intel ME in the MoBo but I don't if that could help and what settings are correct. Thanks for you help.

  Read the article

• Why is Google Chrome making these weird requests?

  - by mackenir

  I noticed that now and again, Chrome will make three requests to weird hostnames that arent resolved. For example: HEAD http://gtblynlsos/ HTTP/1.1 Host: gtblynlsos Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.107 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en-US;q=0.8,en;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Other example weird hostnames: http://nxibbjklov/ http://moheksgryj/ Has anyone else seen this? Any ideas what's going on? I have all Chrome extensions disabled.

  Read the article

• Files slow to save sometimes after Ubuntu upgrade

  - by Matchu

  I haven't quite been able to track down why this happens sometimes in Ubuntu 10.04 and not other times. I'll go into gedit or OpenOffice.org and try to save files, and, during some sessions, it will take up to 10 seconds to save the file, sometimes causing the program to become unresponsive. But during these same sessions, the files sometimes save instantly. This didn't start happening until after the 10.04 (Lucid) upgrade. I suspect that something is reading all the changes I make, or that there's some other big file action going on, or something like that. I disabled Tracker a while back, before the upgrade, and don't see it under the settings - could it be back under a different name under Lucid? You probably don't already know the answer, but how can I go about finding the cause of this problem?

  Read the article

• Windows 8 to 8.1 Pro Upgrade SecureBoot Error

  - by Alexandru

  I upgraded from Windows 8 to Windows 8.1. I have an Alienware Aurora R4 with the latest BIOS firmware version, A09. Ever since I did the upgrade, I get a watermark on my desktop saying, "SecureBoot isn't configured correctly"...I would like to get rid of this watermark the correct way (not by hacking system DLLs). My BIOS shows me booting in UEFI mode, and I see that SecureBoot is actually disabled from there. I cannot enable SecureBoot, in either UEFI mode or Legacy Boot mode. Note, I can't even get Legacy Boot mode working without re-formatting my system which I really don't plan on doing, so my question is this...what has changed in the way Windows handles SecureBoot? As far as I can tell, I do not have SecureBoot enabled, and it is trying to tell me that it isn't configured correctly. Why does it even care to check if my BIOS doesn't have it on anyways?! Its so frustrating!

  Read the article

• Preventing - Large Number of Failed Login Attempts from IP

  - by Silver89

  I'm running a CentOS 6.3 server and currently receive emails entitled "Large Number of Failed Login Attempts from IP" from my server every 15 minutes or so. Surely with the below configured it should mean only the person using the (my static ip) should be able to even try and log in? If that's the case where are these remote unknown users trying to log into which is generating these emails? Current Security Steps: root login is only allowed without-password StrictModes yes SSH password login is disabled - PasswordAuthentication no SSH public keys are used SSH port has been changed to a number greater than 40k cPHulk is configured and running Logins limited to specific ip address cPanel and WHM limited to my static ip only hosts.allow sshd: (my static ip) vsftpd: (my static ip) whostmgrd: (my static ip) hosts.deny ALL : ALL

  Read the article

• Windows 8 Secureboot: How do you bootup from another device such as cd/dvd drive or usb flash etc.?

  - by Victor T.

  On PC's and laptops running an older OS, this is just a simple matter of going into the BIOS and setting the boot sequence and putting the boot cd/dvd in the drive. In many cases you can even just hit one of the F* function keys to bring up the boot sequence menu on-the-fly during POST. The main problem I'm running into is that other devices besides the primary HD is disabled when SecureBoot is enabled. So far the only way I've gotten it to work is to disable SecureBoot and enable something called legacy mode. Needless to say this make it difficult to boot things like OS recovery tools, PartitionHD backups, Linux LiveCD's and a bunch of others. Is there another procedure for doing this since it seems to mess up the Windows 8 install? By mess up I mean that after re-enabling SecureBoot and starting Windows 8 normally, the OS goes into a 'preping repair phase' for some reason that takes forever to complete before getting into a usable desktop.

  Read the article

• Using unsigned drivers in Windows 8

  - by T. Fabre

  I just migrated from Windows 7 x64 to 8, but I can't get my VPN software to run anymore : the SafeNet IKE service (installed by SafeNet SoftRemoteLT GA, used by my VPN provider) cannot start anymore. I found that by default unsigned drivers are disabled on Win8, and that is what is blocking the driver. The System event log tells me that the driver (apparently, C:\WINDOWS\SysWow64\Drivers\IPSECDRV.sys ) was blocked when I try to manually start the service (SafeNet IKE Service). I get the same messages for another driver, crypto.sys found in the same folder. I tried using bcdedit to enable unsigned drivers : bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit /set testsigning ON After reboot, same error. I tried by booting into Win 8's test mode, same issue. Applying the code signing policy (Enabled, Ignore) does not help either. Running gpresult does show that the policy is applied. Any help welcome.

  Read the article

• How can I force Firefox to select the tab to the right on tab close?

  - by Philip

  I'm using TMP 0.3.8.2 and a host of other extensions on FF 3.6.3 on OSX 10.6. I've tried disabling all other extensions that might interfere with tab settings but it's hard to keep track of everything because I have literally 60 (about 30 are disabled though) that are on and off in various configurations. I'm wondering if there's a way to FORCE Firefox to select the tab to the right on closing a tab, in such a way that it overrides any other setting anywhere else. I realize the prospects for this are dim. Thanks.

  Read the article

• Can't reach custom C# forms application remotely.

  - by gnucom

  Hello, I'm working in Windows Server 2008. I have a very basic C# forms application (not a service) that is listening on a port, say 56112. When using telnet I can connect from the localhost and send and receive data. For some reason I cannot remotely connect to the application. I know I have a connection because I can telnet to 23 on the remotely fine. I've opened this port on the firewall, created rules in/out in advanced firewall, disabled the firewall completely, and more. Any suggestions would be great! This is the telnet output: Microsoft Telnet> open server.cc 56112 Connecting server.cc...Could not open connection to the host, on port 56112: Connect failed

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >