pat james - Page 87 - Developer IT

Can't access shared drive when connecting over VPN

- by evolvd

I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

Read the article

ASA 5540 v8.4(3) vpn to ASA 5505 v8.2(5), tunnel up but I cant ping from 5505 to IP on other side

- by user223833

I am having problems pinging from a 5505(remote) to IP 10.160.70.10 in the network behind the 5540(HQ side). 5505 inside IP: 10.56.0.1 Out: 71.43.109.226 5540 Inside: 10.1.0.8 out: 64.129.214.27 I Can ping from 5540 to 5505 inside 10.56.0.1. I also ran ASDM packet tracer in both directions, it is ok from 5540 to 5505, but drops the packet from 5505 to 5540. It gets through the ACL and dies at the NAT. Here is the 5505 config, I am sure it is something simple I am missing. ASA Version 8.2(5) ! hostname ASA-CITYSOUTHDEPOT domain-name rngint.net names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.56.0.1 255.255.0.0 ! interface Vlan2 nameif outside security-level 0 ip address 71.43.109.226 255.255.255.252 ! banner motd ***ASA-CITYSOUTHDEPOT*** banner asdm CITY SOUTH DEPOT ASA5505 ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name rngint.net access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.1.0.125 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.160.70.10 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 host 10.1.0.125 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 10.106.70.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 25000 logging buffered informational logging asdm warnings mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 71.43.109.225 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ (inside) host 10.106.70.36 key ***** aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization exec authentication-server http server enable http 192.168.1.0 255.255.255.0 inside http 10.0.0.0 255.0.0.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server host inside 10.106.70.7 community ***** no snmp-server location no snmp-server contact snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 64.129.214.27 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh 10.0.0.0 255.0.0.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside dhcpd auto_config outside ! dhcpd address 10.56.0.100-10.56.0.121 inside dhcpd dns 10.1.0.125 interface inside dhcpd auto_config outside interface inside ! dhcprelay server 10.1.0.125 outside dhcprelay enable inside dhcprelay setroute inside dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tftp-server inside 10.1.1.25 CITYSOUTHDEPOT-ASA-Confg webvpn tunnel-group 64.129.214.27 type ipsec-l2l tunnel-group 64.129.214.27 ipsec-attributes pre-shared-key ***** ! ! prompt hostname context

Read the article

Can I use the same machine as a client and server for SSH?

- by achraf

For development tests, I need to setup an SFTP server. So I want to know if it's possible to use the same machine as the client and the server. I tried and I keep getting this error: > Permission denied (publickey). > Connection closed and by running ssh -v agharroud@localhost i get : > OpenSSH_3.8.1p1,OpenSSL 0.9.7d 17 Mar > debug1: Reading configuration data /etc/ssh_config > debug1: Connecting to localhost [127.0.0.1] port 22. > debug1: Connection established. > debug1: identity file /home/agharroud/.ssh/identity type -1 > debug1: identity file /home/agharroud/.ssh/id_rsa type 1 > debug1: identity file /home/agharroud/.ssh/id_dsa type -1 > debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8.1p1 > debug1: match: OpenSSH_3.8.1p1 pat OpenSSH* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug1: kex:server->client aes128-cbc hmac-md5 none > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host 'localhost' is known and matches the RSA host key. > debug1: Found key in /home/agharroud/.ssh/known_hosts:1 > debug1: ssh_rsa_verify: signature correct > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug1: SSH2_MSG_SERVICE_ACCEPT > received > > ****USAGE WARNING**** > > This is a private computer system. This computer system, including all > related equipment, networks, and network devices (specifically > including Internet access) are provided only for authorized use. This > computer system may be monitored for all lawful purposes, including to > ensure that its use is authorized, for management of the system, to > facilitate protection against unauthorized access, and to verify > security procedures, survivability, and operational security. Monitoring > includes active attacks by authorized entities to test or verify the > security of this system. During monitoring, information may be > examined, recorded, copied and used for authorized purposes. All > information, including personal information, placed or sent over this > system may be monitored. > > Use of this computer system, authorized or unauthorized, > constitutes consent to monitoring of this system. Unauthorized use may > subject you to criminal prosecution. Evidence of unauthorized use collected > during monitoring may be used for administrative, criminal, or other > adverse action. Use of this system constitutes consent to monitoring for > these purposes. > > debug1: Authentications that can continue: publickey > debug1: Next authentication method: publickey > debug1: Trying private key:/home/agharroud/.ssh/identity > debug1: Offering public key:/home/agharroud/.ssh/id_rsa > debug1:Authentications that can continue:publickey > debug1: Trying private key:/home/agharroud/.ssh/id_dsa > debug1: No more authentication methods to try. > Permission denied (publickey). Any ideas about the problem ? thanks !

Read the article

ssh permission denied

- by Gitmo

I am trying to ssh into a remote machine and I get the following debug messages: debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.x.xx [xxx.xxx.xx.x] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/hadoop/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/hadoop/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-6ubuntu2 debug1: match: OpenSSH_5.1p1 Debian-6ubuntu2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-cbc hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 128/256 debug2: bits set: 511/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/hadoop/.ssh/known_hosts debug3: check_host_in_hostfile: match line 20 debug1: Host '192.168.1.63' is known and matches the RSA host key. debug1: Found key in /home/hadoop/.ssh/known_hosts:20 debug2: bits set: 511/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/hadoop/.ssh/id_rsa (0x241c110) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: /home/hadoop/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,password). What seems to be the problem?? I have tried everything, this is driving me nuts.

Read the article

Android Augmented Reality

- by Azooz Totti

I'm working on my first Android Augmented Reality application. The application works pretty good if the ARActivity runs as the first class (android.intent.category.LAUNCHER) in the manifest file. But when I added a splash screen which means the ARActivity will be the second to run(android.intent.category.DEFAULT), the camera seems not detecting the marker. I believe the problem is all in the manifest file. Any suggestions ? Thanks This is the manifest.xml <manifest xmlns:android="http://schemas.android.com/apk/res/android" package="com.ar.armarkers" android:versionCode="1" android:versionName="1.0" > <uses-sdk android:minSdkVersion="8" android:targetSdkVersion="15" /> <uses-permission android:name="android.permission.CAMERA" /> <uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" /> <uses-feature android:name="android.hardware.camera" /> <uses-feature android:name="android.hardware.camera.autofocus" /> <application android:icon="@drawable/ic_launcher" android:label="@string/app_name" android:theme="@style/AppTheme" > <activity android:name=".Splash" android:screenOrientation="landscape" android:theme="@android:style/Theme.Black.NoTitleBar.Fullscreen" > <intent-filter> <action android:name="android.intent.action.MAIN" /> <category android:name="android.intent.category.LAUNCHER" /> </intent-filter> </activity> <activity android:name="com.ar.armarkers.MainActivity" android:clearTaskOnLaunch="true" android:label="@string/title_activity_main" android:noHistory="true" android:screenOrientation="landscape" > <intent-filter> <action android:name="com.ar.armarkers.MAINACTIVITY" /> <category android:name="android.intent.category.DEFAULT" /> </intent-filter> </activity> </application> </manifest> MainActivity.java import edu.dhbw.andar.ARObject; import edu.dhbw.andar.ARToolkit; import edu.dhbw.andar.AndARActivity; import edu.dhbw.andar.exceptions.AndARException; import edu.dhbw.andar.pub.CustomRenderer; import android.os.Bundle; import android.util.Log; public class MainActivity extends AndARActivity { private ARObject someObject; private ARToolkit artoolkit; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); CustomRenderer renderer = new CustomRenderer(); setNonARRenderer(renderer); try { artoolkit = getArtoolkit(); someObject = new CustomObject1("test", "marker16.pat", 80.0, new double[] { 0, 0 }); artoolkit.registerARObject(someObject); someObject = new CustomObject2 ("test", "marker17.patt", 80.0, new double[]{0,0}); artoolkit.registerARObject(someObject); } catch (AndARException ex) { System.out.println(""); } startPreview(); } public void uncaughtException(Thread thread, Throwable ex) { // TODO Auto-generated method stub Log.e("AndAR EXCEPTION", ex.getMessage()); finish(); } } Splash.java import android.app.Activity; import android.app.ProgressDialog; import android.content.Intent; import android.os.Bundle; import android.view.Gravity; public class Splash extends Activity { @Override protected void onCreate(Bundle savedInstanceState) { // TODO Auto-generated method stub super.onCreate(savedInstanceState); setContentView(R.layout.splash); Thread timer = new Thread() { public void run() { try { sleep(1000); } catch (InterruptedException e) { e.printStackTrace(); } finally { Intent i = new Intent(getApplicationContext(), MainActivity.class); startActivity(i); } } }; timer.start(); } }

Read the article

Using Bundle and Intent with TabHost

- by apesa

I am using TabHost with 3 tabs. I need to pass the params selected from one screen using Bundle and / or Intent to the next and then set the correct tab in TabHost and pass those params to the correct tab. I hope that makes sense. I have a config screen that has several radio buttons that are grouped and 1 checkbox and a button. in my onClick() I have the following code. public class Distribute extends Activity implements OnClickListener { DistributionMap gixnav; protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); TextView textview = new TextView(this); textview.setText("Distribution"); setContentView(R.drawable.configup); Button button = (Button)findViewById(R.id.btn_configup1); button.setOnClickListener(this); } public void onClick(View v) { Intent intent; Bundle extras = new Bundle(); intent = new Intent().setClass(getApplicationContext(), Clevel.class); intent.putExtras(extras); startActivity(intent); } } I need to pass the selection params (which radio button is selected and is the checkbox clicked to Clevel. In Clevel I have to parse the bundle and operate on those params. Basiclaly I will be pulling data froma DB and using that data to call google maps ItemizedOverlay. onClick calls Clevel.class using Intent. This works and I understand how Intent works. What I need to understand is how to grab or reference the selected radio button and whatever else may be clicked or checked and pass it through TabHost to the correct Tab. This is what I have in Clevel for TabHost. From TabHost the onCLick will need to pass everything to Distribute.class public class Clevel extends TabActivity { /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.gixout1); Resources res = getResources(); TabHost tabHost = getTabHost(); TabHost.TabSpec spec; Intent intent; String mData; Bundle extras = getIntent().getExtras(); if (extras != null) { mData = extras.getString("key"); } intent = new Intent().setClass(this, ClevelMain.class); spec = tabHost.newTabSpec("Main").setIndicator("C-Level", res.getDrawable(R.drawable.gixmain)) .setContent(intent); tabHost.addTab(spec); intent = new Intent().setClass(this, Distribute.class); spec = tabHost.newTabSpec("Config").setIndicator("Distribute", res.getDrawable(R.drawable.gixconfig)) .setContent(intent); tabHost.addTab(spec); intent = new Intent().setClass(this, DistributionMap.class); spec = tabHost.newTabSpec("Nav").setIndicator("Map", res.getDrawable(R.drawable.gixnav)) .setContent(intent); tabHost.addTab(spec); tabHost.setCurrentTab(3); tabHost.getOnFocusChangeListener(); } I am really looking for some pointers on how to pass and use params in Bundle and whether in should use Bundle and Intent or can I just use Intent? Thanks in advance, Pat

Read the article

VB.NET IF() Coalesce and “Expression Expected” Error

- by Jeff Widmer

I am trying to use the equivalent of the C# “??” operator in some VB.NET code that I am working in. This StackOverflow article for “Is there a VB.NET equivalent for C#'s ?? operator?” explains the VB.NET IF() statement syntax which is exactly what I am looking for... and I thought I was going to be done pretty quickly and could move on. But after implementing the IF() statement in my code I started to receive this error: Compiler Error Message: BC30201: Expression expected. And no matter how I tried using the “IF()” statement, whenever I tried to visit the aspx page that I was working on I received the same error. This other StackOverflow article Using VB.NET If vs. IIf in binding/rendering expression indicated that the VB.NET IF() operator was not available until VS2008 or .NET Framework 3.5. So I checked the Web Application project properties but it was targeting the .NET Framework 3.5: So I was still not understanding what was going on, but then I noticed the version information in the detailed compiler output of the error page: This happened to be a C# project, but with an ASPX page with inline VB.NET code (yes, it is strange to have that but that is the project I am working on). So even though the project file was targeting the .NET Framework 3.5, the ASPX page was being compiled using the .NET Framework 2.0. But why? Where does this get set? How does ASP.NET know which version of the compiler to use for the inline code? For this I turned to the web.config. Here is the system.codedom/compilers section that was in the web.config for this project: <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> </compilers> </system.codedom> Keep in mind that this is a C# web application project file but my aspx file has inline VB.NET code. The web.config does not have any information for how to compile for VB.NET so it defaults to .NET 2.0 (instead of 3.5 which is what I need). So the web.config needed to include the VB.NET compiler option. Here it is with both the C# and VB.NET options (I copied the VB.NET config from a new VB.NET Web Application project file). <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5" /> <providerOption name="WarnAsError" value="false" /> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" warningLevel="4" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> So the inline VB.NET code on my aspx page was being compiled using the .NET Framework 2.0 when it really needed to be compiled with the .NET Framework 3.5 compiler in order to take advantage of the VB.NET IF() coalesce statement. Without the VB.NET web.config compiler option, the default is to compile using the .NET Framework 2.0 and the VB.NET IF() coalesce statement does not exist (at least in the form that I want it in). FYI, there is an older IF statement in VB.NET 2.0 compiler which is why it is giving me the unusual “Expression Expected” error message – see this article for when VB.NET got the new updated version. EDIT (2011-06-20): I had made a wrong assumption in the first version of this blog post. After a little more research and investigation I was able to figure out that the issue was in the web.config and not with the IIS App Pool. Thanks to the comment from James which forced me to look into this again.

Read the article

CodePlex Daily Summary for Tuesday, March 09, 2010

CodePlex Daily Summary for Tuesday, March 09, 2010New Projects.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: .NET Excel Wrapper encapsulates the complexity of working with multiple Excel objects giving you one central point to do all your processing. It h...Advancement Voyage: Advancement Voyage is a high quality RPG experience that provides all the advancement and voyaging that a player could hope for.ASP.Net Routing configuration: ASP.NET routing configuration enables you to configure the routes in the web.config bbinjest: bbinjestBuildUp: BuildUp is a build number increment tool for C# .net projects. It is run as a post build step in Visual Studio.Controlled Vocabulary: This project is devoted to creating tools to assist with Controlling Vocabulary in communication. The initial delivery is an Outlook 2010 Add-in w...CycleList: A replacement for the WPF ListBox Control. Displays only a single item and allows the user to change the selected item by clicking on it once. Very...Forensic Suite: A suite of security softwareFREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat is a live chat solution and its DotNetNuke Chat Module helps to embed a live chat room into website with DotNetNuke(DNN) integrated ...HouseFly experimental controls: Experimental controls for use in HouseFly.ICatalogAll: junkMidiStylus: MidiStylus allows you to control MIDI-enabled hardware or software using your pressure-sensitive pen tablet. The program maps the X position, Y po...myTunes: Search for your favorite artistsNColony - Pluggable Socialism?: NColony will maximize the use of MEF to create flexible application architectures through a suite of plug-in solutions. If MEF is an outlet for plu...Network Monitor Decryption Expert: NmDecrypt is a Network Monitor Expert which when given a trace with encrypted frames, a security certificate, and a passkey will create a new trace...occulo: occulo is a free steganography program, meant to embed files within images with optional encrytion. Open Ant: A implementation of a Open Source Ant which is created to show what is possible in the serious game AntMe! The First implementation of that ProjectProgramming Patterns by example: Design patterns provide solutions to common software design problems. This project will contain samples, written in c# and ruby, of each design pat...project4k: Developing bulk mail system storing email informationQuail - Selenium Remote Control Made Easy: Quail makes it easy for Quality Assurance departments write automated tests against web applications. Both HTML and Silverlight applications can b...RedBulb for XNA Framework: RedBulb is a collection of utility functions and classes that make writing games with XNA a lot easier. Key features: Console,GUI (Labels, Buttons,...RegExpress: RegExpress is a WPF application that combines interactive demos of regular expressions with slide content. This was designed for a user group prese...RemoveFolder: Small utility program to remove empty foldersScrumTFS: ScrumTFSSharePoint - Open internal link in new window list definition: A simple SharePoint list definition to render SharePoint internal links with the option to open them in a new window.SqlSiteMap4MVC: SqlSiteMapProvider for ASP.Net MVC.T Sina .NET Client: t.sina.com.cn api 新浪微博APITest-Lint-Extensions: Test Lint is a free Typemock VS 2010 Extension that finds common problems in your unit tests as you type them. this project will host extensions ...ThinkGearNET: ThinkGearNET is a library for easy usage of the Neurosky Mindset headset from .NET .Wiki to Maml: This project enables you to write wiki syntax and have it converted into MAML syntax for Sandcastle documentation projects.WPF Undo/Redo Framework: This project attempts to solve the age-old programmer problem of supporting unlimited undo/redo in an application, in an easily reusable manner. Th...WPFValidators: WPF Validators Validações de campos para WPFWSP Listener: The WSP listener is a windows service application which waits for new WSC and WSP files in a specific folder. If a new WSC and WSP file are added, ...New Releases.NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: First Release: This is the first release which includes the main library release..NET Excel Wrapper - Read, Write, Edit & Automate Excel Files in .NET with ease: Updated Version: New Features:SetRangeValue using multidimensional array Print current worksheet Print all worksheets Format ranges background, color, alig...ArkSwitch: ArkSwitch v1.1.2: This release removes all memory reporting information, and is focused on stability.BattLineSvc: V2.1: - Fixed a bug where on system start-up, it would pop up a notification box to let you know the service started. Annoying! And fixed! - Fixed the ...BuildUp: BuildUp 1.0 Alpha 1: Use at your own risk!Not yet feature complete. Basic build incrementing and attribute overriding works. Still working on cascading build incremen...Controlled Vocabulary: 1.0.0.1: Initial Alpha Release. System Requirements Outlook 2010 .Net Framework 3.5 Installation 1. Close Outlook (Use Task Manager to ensure no running i...CycleList: CycleList: The binaries contain the .NET 3.5 DLL ONLY. Please download source for usage examples.FluentNHibernate.Search: 0.3 Beta: 0.3 Beta take the following changes : Mappings : - Field Mapping without specifying "Name" - Id Mapping without specifiying "Field" - Builtin Anal...FREE DNN Chat Module for 123 Flash Chat -- Embed FREE Chat Room!: 123 Flash Chat DNN Chat Module: With FREE DotNetNuke Chat Module of 123 Flash Chat, webmaster will be assist to add a chat room into DotNetNuke instantly and help to attract more ...GameStore League Manager: League Manager 1.0 release 3: This release includes a full installer so that you can get your league running faster and generate interest quicker.iExporter - iTunes playlist exporting: iExporter gui v2.3.1.0 - console v1.2.1.0: Paypal donate! Solved a big bug for iExporter ( Gui & Console ) When a track isn't located under the main iTunes library, iExporter would crash! ...jQuery.cssLess: jQuery.cssLess 0.3: New - Removed the dependency from XRegExp - Added comment support (both CSS style and C style) - Optimised it for speed - Added speed test TOD...jQuery.cssLess: jQuery.cssLess 0.4: NEW - @import directive - preserving of comments in the resulting CSS - code refactoring - more class oriented approach TODO - implement operation...MapWindow GIS: MapWindow 6.0 msi (March 8): Rewrote the shapefile saving code in the indexed case so that it uses the shape indices rather than trying to create features. This should allow s...MidiStylus: MidiStylus 0.5.1: MidiStylus Beta 0.5.1 This release contains basic functionality for transmitting MIDI data based on X position, Y position, and pressure value rea...MiniTwitter: 1.09.1: MiniTwitter 1.09.1 更新内容修正 URL に & が含まれている時に短縮 URL がおかしくなるバグを修正Mosaictor: first executable: .exe file of the app in its current state. Mind you that this will likely be highly unstable due to heaps of uncaught errors.MvcContrib a Codeplex Foundation project: T4MVC: T4MVC is a T4 template that generates strongly typed helpers for ASP.NET MVC. You can download it below, and check out the documention here.N2 CMS: 2.0 beta: Major Changes ASP.NET MVC 2 templates Refreshed management UI LINQ support Performance improvements Auto image resize Upgrade Make a comp...NotesForGallery: ASP.NET AJAX Photo Gallery Control: NotesForGallery 2.0: PresentationNotesForGallery is an open source control on top of the Microsoft ASP.NET AJAX framework for easy displaying image galleries in the as...occulo: occulo 0.1 binaries: Windows binaries. Tested on Windows XP SP2.occulo: occulo 0.1 source: Initial source release.Open NFe: DANFE 1.9.5: Ajuste de layout e correção dos campos de ISS.patterns & practices Web Client Developer Guidance: Web Application Guidance -- March 8th Drop: This iteration we focused on documentation and bug fixes.PoshConsole: PoshConsole 2.0 Beta: With this release, I am refocusing PoshConsole... It will be a PowerShell 2 host, without support for PowerShell 1.0 I have used some of the new P...Quick Performance Monitor: QPerfmon 1.1: Now you can specify different updating frequencies.RedBulb for XNA Framework: Cipher Puzzle (Sample) Creators Club Package: RedBulb Sample Game: Cipher Puzzle http://bayimg.com/image/galgfaacb.jpgRedBulb for XNA Framework: RedBulbStarter (Base Code): This is the code you need to start with. Quick Start Guide: Download the latest version of RedBulb: http://redbulb.codeplex.com/releases/view/415...RoTwee: RoTwee 7.0.0.0 (Alpha): Now this version is under improvement of code structure and may be buggy. However movement of rotation is quite good in this version thanks to clea...SCSI Interface for Multimedia and Block Devices: Release 9 - Improvements and Bug Fixes: Changes I have made in this version: Fixed INQUIRY command timeout problem Lowered ISOBurn's memory usage significantly by not explicitly setting...SharePoint - Open internal link in new window list definition: Open link in new window list definition: First release, with english and italian localization supportSharePoint Outlook Connector: Version 1.2.3.2: Few bug fixing and some ui enhancementsSysI: sysi, release build: Better than ever -- now allows for escalation to adminThe Silverlight Hyper Video Player [http://slhvp.com]: Beta 1: Beta (1.1) The code is ready for intensive testing. I will update the code at least every second day until we are ready to freeze for V1, which wi...Truecrafting: Truecrafting 0.52: fixed several trinkets that broke just before i released 0.51, sorry fixed water elemental not doing anything while summoned if not using glyph o...Truecrafting: Truecrafting 0.53: fixed mp5 calculations when gear contained mp5 and made the formulas more efficient no need to rebuild profiles with this release if placed in th...umbracoSamplePackageCreator (beta): Working Beta: For Visual Studio 2008 creating packages for Umbraco 4.0.3.VCC: Latest build, v2.1.30307.0: Automatic drop of latest buildVCC: Latest build, v2.1.30308.0: Automatic drop of latest buildVOB2MKV: vob2mkv-1.0.3: This is a maintenance update of the VOB2MKV utility. The MKVMUX filter now describes the cluster locations using a separate SeekHead element at th...WPFValidators: WPFValidators 1.0 Beta: Primeira versão do componente ainda em Beta, pode ser utilizada em produção pois esta funcionando bem e as futuras alterações não sofreram muito im...WSDLGenerator: WSDLGenerator 0.0.06: - Added option to generate SharePoint compatible *disco.aspx file. - Changed commandline optionsWSP Listener: WSP Listener version 1.0.0.0: First version of the WSP Listener includes: Easy cop[y paste installation of WSP solutions Extended logging E-mail when installation is finish...Yet another pali text reader: Pali Text Reader App v1.1: new features/updates + search history is now a tab + format codes in dictionary + add/edit terms in the dictionary + pali keyboard inserts symbols...Most Popular ProjectsMetaSharpi4o - Indexed LINQResExBraintree Client LibraryGeek's LibrarySharepoint Feature ManagerConfiguration ManagementOragon Architecture SqlBuilderTerrain Independant Navigating Automaton v2.0WBFS ManagerMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web ServicesFasterflect - A Fast and Simple Reflection APIFarseer Physics Enginepatterns & practices – Enterprise LibraryTeam FTW - Software ProjectIonics Isapi Rewrite Filter

Read the article

Wishful Thinking: Why can't HTML fix Script Attacks at the Source?

- by Rick Strahl

The Web can be an evil place, especially if you're a Web Developer blissfully unaware of Cross Site Script Attacks (XSS). Even if you are aware of XSS in all of its insidious forms, it's extremely complex to deal with all the issues if you're taking user input and you're actually allowing users to post raw HTML into an application. I'm dealing with this again today in a Web application where legacy data contains raw HTML that has to be displayed and users ask for the ability to use raw HTML as input for listings. The first line of defense of course is: Just say no to HTML input from users. If you don't allow HTML input directly and use HTML Encoding (HttyUtility.HtmlEncode() in .NET or using standard ASP.NET MVC output @Model.Content) you're fairly safe at least from the HTML input provided. Both WebForms and Razor support HtmlEncoded content, although Razor makes it the default. In Razor the default @ expression syntax:@Model.UserContent automatically produces HTML encoded content - you actually have to go out of your way to create raw HTML content (safe by default) using @Html.Raw() or the HtmlString class. In Web Forms (V4) you can use:<%: Model.UserContent %> or if you're using a version prior to 4.0:<%= HttpUtility.HtmlEncode(Model.UserContent) %> This works great as a hedge against embedded <script> tags and HTML markup as any HTML is turned into text that displays as HTML but doesn't render the HTML. But it turns any embedded HTML markup tags into plain text. If you need to display HTML in raw form with the markup tags rendering based on user input this approach is worthless. If you do accept HTML input and need to echo the rendered HTML input back, the task of cleaning up that HTML is a complex task. In the projects I work on, customers are frequently asking for the ability to post raw HTML quite frequently. Almost every app that I've built where there's document content from users we start out with text only input - possibly using something like MarkDown - but inevitably users want to just post plain old HTML they created in some other rich editing application. See this a lot with realtors especially who often want to reuse their postings easily in multiple places. In my work this is a common problem I need to deal with and I've tried dozens of different methods from sanitizing, simple rejection of input to custom markup schemes none of which have ever felt comfortable to me. They work in a half assed, hacked together sort of way but I always live in fear of missing something vital which is *really easy to do*. My Wishlist Item: A <restricted> tag in HTML Let me dream here for a second on how to address this problem. It seems to me the easiest place where this can be fixed is: In the browser. Browsers are actually executing script code so they have a lot of control over the script code that resides in a page. What if there was a way to specify that you want to turn off script code for a block of HTML? The main issue when dealing with HTML raw input isn't that we as developers are unaware of the implications of user input, but the fact that we sometimes have to display raw HTML input the user provides. So the problem markup is usually isolated in only a very specific part of the document. So, what if we had a way to specify that in any given HTML block, no script code could execute by wrapping it into a tag that disables all script functionality in the browser? This would include <script> tags and any document script attributes like onclick, onfocus etc. and potentially also disallow things like iFrames that can potentially be scripted from the within the iFrame's target. I'd like to see something along these lines:<article> <restricted allowscripts="no" allowiframes="no"> <div>Some content</div> <script>alert('go ahead make my day, punk!");</script> <div onfocus="$.getJson('http://evilsite.com/')">more content</div> </restricted> </article> A tag like this would basically disallow all script code from firing from any HTML that's rendered within it. You'd use this only on code that you actually render from your data only and only if you are dealing with custom data. So something like this:<article> <restricted> @Html.Raw(Model.UserContent) </restricted> </article> For browsers this would actually be easy to intercept. They render the DOM and control loading and execution of scripts that are loaded through it. All the browser would have to do is suspend execution of <script> tags and not hookup any event handlers defined via markup in this block. Given all the crazy XSS attacks that exist and the prevalence of this problem this would go a long way towards preventing at least coded script attacks in the DOM. And it seems like a totally doable solution that wouldn't be very difficult to implement by vendors. There would also need to be some logic in the parser to not allow an </restricted> or <restricted> tag into the content as to short-circuit the rstricted section (per James Hart's comment). I'm sure there are other issues to consider as well that I didn't think of in my off-the-back-of-a-napkin concept here but the idea overall seems worth consideration I think. Without code running in a user supplied HTML block it'd be pretty hard to compromise a local HTML document and pass information like Cookies to a server. Or even send data to a server period. Short of an iFrame that can access the parent frame (which is another restriction that should be available on this <restricted> tag) that could potentially communicate back, there's not a lot a malicious site could do. The HTML could still 'phone home' via image links and href links potentially and basically say this site was accessed, but without the ability to run script code it would be pretty tough to pass along critical information to the server beyond that. Ahhhh… one can dream… Not holding my breath of course. The design by committee that is the W3C can't agree on anything in timeframes measured less than decades, but maybe this is one place where browser vendors can actually step up the pressure. This is something in their best interest to reduce the attack surface for vulnerabilities on their browser platforms significantly. Several people commented on Twitter today that there isn't enough discussion on issues like this that address serious needs in the web browser space. Realistically security has to be a number one concern with Web applications in general - there isn't a Web app out there that is not vulnerable. And yet nothing has been done to address these security issues even though there might be relatively easy solutions to make this happen. It'll take time, and it's probably not going to happen in our lifetime, but maybe this rambling thought sparks some ideas on how this sort of restriction can get into browsers in some way in the future.© Rick Strahl, West Wind Technologies, 2005-2012Posted in ASP.NET HTML5 HTML Security Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Unity not Working 14.04

- by Back.Slash

I am using Ubuntu 14.04 LTS x64. I did a sudo apt-get upgrade yesterday and restarted my PC. Now my taskbar and panel are missing. When I try to restart Unity using unity --replace Then I get error: unity-panel-service stop/waiting compiz (core) - Info: Loading plugin: core compiz (core) - Info: Starting plugin: core unity-panel-service start/running, process 3906 compiz (core) - Info: Loading plugin: ccp compiz (core) - Info: Starting plugin: ccp compizconfig - Info: Backend : gsettings compizconfig - Info: Integration : true compizconfig - Info: Profile : unity compiz (core) - Info: Loading plugin: composite compiz (core) - Info: Starting plugin: composite compiz (core) - Info: Loading plugin: opengl compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Unity is fully supported by your hardware. compiz (core) - Info: Starting plugin: opengl libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/i965_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/i965_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/i965_dri.so failed (${ORIGIN}/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: i965_dri.so libGL error: driver pointer missing libGL error: failed to load driver: i965 libGL error: dlopen /usr/lib/x86_64-linux-gnu/dri/swrast_dri.so failed (/usr/lib/x86_64-linux-gnu/dri/swrast_dri.so: undefined symbol: _glapi_tls_Dispatch) libGL error: dlopen ${ORIGIN}/dri/swrast_dri.so failed (${ORIGIN}/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: dlopen /usr/lib/dri/swrast_dri.so failed (/usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory) libGL error: unable to load driver: swrast_dri.so libGL error: failed to load driver: swrast compiz (core) - Info: Loading plugin: compiztoolbox compiz (core) - Info: Starting plugin: compiztoolbox compiz (core) - Info: Loading plugin: decor compiz (core) - Info: Starting plugin: decor compiz (core) - Info: Loading plugin: vpswitch compiz (core) - Info: Starting plugin: vpswitch compiz (core) - Info: Loading plugin: snap compiz (core) - Info: Starting plugin: snap compiz (core) - Info: Loading plugin: mousepoll compiz (core) - Info: Starting plugin: mousepoll compiz (core) - Info: Loading plugin: resize compiz (core) - Info: Starting plugin: resize compiz (core) - Info: Loading plugin: place compiz (core) - Info: Starting plugin: place compiz (core) - Info: Loading plugin: move compiz (core) - Info: Starting plugin: move compiz (core) - Info: Loading plugin: wall compiz (core) - Info: Starting plugin: wall compiz (core) - Info: Loading plugin: grid compiz (core) - Info: Starting plugin: grid compiz (core) - Info: Loading plugin: regex compiz (core) - Info: Starting plugin: regex compiz (core) - Info: Loading plugin: imgpng compiz (core) - Info: Starting plugin: imgpng compiz (core) - Info: Loading plugin: session compiz (core) - Info: Starting plugin: session I/O warning : failed to load external entity "/home/sumeet/.compiz/session/10de541a813cc1a8fc140170575114755000000020350005" compiz (core) - Info: Loading plugin: gnomecompat compiz (core) - Info: Starting plugin: gnomecompat compiz (core) - Info: Loading plugin: animation compiz (core) - Info: Starting plugin: animation compiz (core) - Info: Loading plugin: fade compiz (core) - Info: Starting plugin: fade compiz (core) - Info: Loading plugin: unitymtgrabhandles compiz (core) - Info: Starting plugin: unitymtgrabhandles compiz (core) - Info: Loading plugin: workarounds compiz (core) - Info: Starting plugin: workarounds compiz (core) - Info: Loading plugin: scale compiz (core) - Info: Starting plugin: scale compiz (core) - Info: Loading plugin: expo compiz (core) - Info: Starting plugin: expo compiz (core) - Info: Loading plugin: ezoom compiz (core) - Info: Starting plugin: ezoom compiz (core) - Info: Loading plugin: unityshell compiz (core) - Info: Starting plugin: unityshell WARN 2014-06-02 18:46:23 unity.glib.dbus.server GLibDBusServer.cpp:579 Can't register object 'org.gnome.Shell' yet as we don't have a connection, waiting for it... ERROR 2014-06-02 18:46:23 unity.debug.interface DebugDBusInterface.cpp:216 Unable to load entry point in libxpathselect: libxpathselect.so.1.4: cannot open shared object file: No such file or directory compiz (unityshell) - Error: GL_ARB_vertex_buffer_object not supported ERROR 2014-06-02 18:46:23 unity.shell.compiz unityshell.cpp:3850 Impossible to delete the unity locked stamp file compiz (core) - Error: Plugin initScreen failed: unityshell compiz (core) - Error: Failed to start plugin: unityshell compiz (core) - Info: Unloading plugin: unityshell X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 3 (X_GetWindowAttributes) Resource id in failed request: 0x3e000c9 Serial number of failed request: 10115 Current serial number in output stream: 10116 Any help would be highly appreciated. EDIT : My PC configuration description: Portable Computer product: Dell System XPS L502X (System SKUNumber) vendor: Dell Inc. version: 0.1 serial: 1006ZP1 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: administrator_password=unknown boot=normal chassis=portable family=HuronRiver System frontpanel_password=unknown keyboard_password=unknown power-on_password=unknown sku=System SKUNumber uuid=44454C4C-3000-1030-8036-B1C04F5A5031 *-core description: Motherboard product: 0YR8NN vendor: Dell Inc. physical id: 0 version: A00 serial: .1006ZP1.CN4864314C0560. slot: Part Component *-firmware description: BIOS vendor: Dell Inc. physical id: 0 version: A11 date: 05/29/2012 size: 128KiB capacity: 2496KiB capabilities: pci pnp upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot smartbattery biosbootspecification netboot *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 19 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: Not Supported by CPU slot: CPU size: 800MHz capacity: 800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L1 cache physical id: 1a slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: synchronous internal write-through data *-cache:1 description: L2 cache physical id: 1b slot: L2-Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through data *-cache:2 description: L3 cache physical id: 1c slot: L3-Cache size: 6MiB capacity: 6MiB capabilities: synchronous internal write-back unified *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 6GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: M471B5273DH0-CH9 vendor: Samsung physical id: 0 serial: 450F1160 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 0CA0E8E2 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:3000(size=4096) memory:f0000000-f10fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:f0000000-f0ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:3000(size=128) memory:f1000000-f107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:52 memory:f1400000-f17fffff memory:e0000000-efffffff ioport:4000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei_me latency=0 resources: irq:50 memory:f1c05000-f1c0500f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:16 memory:f1c09000-f1c093ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:53 memory:f1c00000-f1c03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode cap_list configuration: driver=pcieport resources: irq:16 *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:f1b00000-f1bfffff *-network description: Wireless interface product: Centrino Wireless-N 1030 [Rainbow Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 34 serial: bc:77:37:14:47:e5 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-27-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:51 memory:f1b00000-f1b01fff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:19 memory:f1a00000-f1afffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:f1a00000-f1a01fff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 5 vendor: Intel Corporation physical id: 1c.4 bus info: pci@0000:00:1c.4 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:f1900000-f19fffff *-pci:5 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:2000(size=4096) ioport:f1800000(size=1048576) *-network description: Ethernet interface product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 06 serial: 14:fe:b5:a3:ac:40 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=172.19.167.151 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:49 ioport:2000(size=256) memory:f1804000-f1804fff memory:f1800000-f1803fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci-pci latency=0 resources: irq:23 memory:f1c08000-f1c083ff *-isa description: ISA bridge product: HM67 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: driver=lpc_ich latency=0 resources: irq:0 *-ide:0 description: IDE interface product: 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40b8(size=8) ioport:40cc(size=4) ioport:40b0(size=8) ioport:40c8(size=4) ioport:4090(size=16) ioport:4080(size=16) *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:f1c04000-f1c040ff ioport:efa0(size=32) *-ide:1 description: IDE interface product: 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller vendor: Intel Corporation physical id: 1f.5 bus info: pci@0000:00:1f.5 version: 05 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list configuration: driver=ata_piix latency=0 resources: irq:19 ioport:40a8(size=8) ioport:40c4(size=4) ioport:40a0(size=8) ioport:40c0(size=4) ioport:4070(size=16) ioport:4060(size=16) *-scsi:0 physical id: 1 logical name: scsi0 capabilities: emulated *-disk description: ATA Disk product: SAMSUNG HN-M640M physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2AR1 serial: S2T3J1KBC00006 size: 596GiB (640GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 sectorsize=512 signature=6b746d91 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 0272-3e7f size: 348MiB capacity: 350MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2013-09-18 12:20:45 filesystem=ntfs label=System Reserved modified_by_chkdsk=true mounted_on_nt4=true resize_log_file=true state=dirty upgrade_on_mount=true *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 116GiB capacity: 116GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 6037MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 110GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,data=ordered state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/os version: 3.1 serial: 4e7853ec-5555-a74d-82e0-9f49798d3772 size: 156GiB capacity: 156GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-19 09:19:00 filesystem=ntfs label=OS mount.fstype=fuseblk mount.options=ro,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 state=mounted *-volume:3 description: Windows NTFS volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 logical name: /media/data version: 3.1 serial: 7666d55f-e1bf-e645-9791-2a1a31b24b9a size: 322GiB capacity: 322GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2013-09-17 23:27:01 filesystem=ntfs label=Data modified_by_chkdsk=true mount.fstype=fuseblk mount.options=rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 mounted_on_nt4=true resize_log_file=true state=mounted upgrade_on_mount=true *-scsi:1 physical id: 2 logical name: scsi1 capabilities: emulated *-cdrom description: DVD-RAM writer product: DVD+-RW GT32N vendor: HL-DT-ST physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/sr0 version: A201 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-battery product: DELL vendor: SANYO physical id: 1 version: 2008 serial: 1.0 slot: Rear capacity: 57720mWh configuration: voltage=11.1V `

Read the article

XNA Notes 010

- by George Clingerman

With GDC 2011 wrapping up there were a LOT of great interviews and posts with and about XNA and XBLIG and some of our more notorious developers. Definitely worth spending many, many hours watching, listening and reading all those. Very inspiring! Also, don’t forget to get signed up for Dream Build Play! And just as an early warning reminder do NOT, I repeat do NOT wait to submit your game the last day. There are major issues submitting the last day every year and you do not want all your hard work to be hanging on whether your entry actually went through in that last day. Plan on submitting a few days if not a week before. I’m serious, you’ll thank yourself later! Now on to what’s happening in the XNA community! Time Critical XNA News: PAX East Meet Up (really wish I was going!) http://forums.create.msdn.com/forums/p/71921/439262.aspx Want to stay panicked about the countdown to Dream Build Play? Mike McLaughlin shares his DBP countdown clock http://twitter.com/#!/mikebmcl/status/44454458960252928 XNA Team: Nick Gravelyn Only needs less than 600 new users in his unique marketing plan for Pixel Man 2 http://nickgravelyn.com/pixelman2/ And hares his ad revenue numbers with his XNA WP7 games http://theoneswiththelight.com/2011/my-results-with-ad-revenue-for-wp7-games/ XNA MVPs: Andy “The ZMan” Dunn posts his 15,000th App Hub forum post and shares a few thoughts on the MVP summit http://forums.create.msdn.com/forums/t/77625.aspx Chris Williams shares his thoughts on the MVP summit http://geekswithblogs.net/cwilliams/archive/2011/03/07/144229.aspx XNA Developers: Nathan Fouts of Mommy’s Best games Wraps up GDC http://mommysbest.blogspot.com/2011/03/gdc-2011-wrapped.html And shares the wonderful screenshots from Serious Sam. (I’m so jealous people at PAX East willl be playing a demo of this game!) http://mommysbest.blogspot.com/2011/03/serious-sam-double-d.html James Silva of Ska Studios announces http://www.ska-studios.com/2011/03/09/vampire-smile-at-hotel-sierra/ http://www.ska-studios.com/2011/03/08/vengeance-begins-april-6th/ http://www.ska-studios.com/2011/03/04/good-morning-gato-52/ Michael McLaughlin writes an extremely useful set of tips for XNA WP7 developers http://geekswithblogs.net/mikebmcl/archive/2011/03/10/tips-for-xna-wp7-developers.aspx Robert Boyd “the one man XBLIG improving machine” posts his 9 tips for marketing an Xbox LIVE Indie Gam http://www.gamasutra.com/blogs/RobertBoyd/20110309/7183/9_Tips_for_XBLIG_Marketing.php http://forums.create.msdn.com/forums/p/77534/470586.aspx#470586 And shares his day by day experience at GDC this year http://www.gamasutra.com/blogs/RobertBoyd/20110301/7118/GDC_Saves_the_World__Impressions_Day_1.php http://www.gamasutra.com/blogs/RobertBoyd/20110301/7123/GDC_Saves_the_World__Impressions_Day_2.php http://www.gamasutra.com/blogs/RobertBoyd/20110303/7129/GDC_Saves_the_World__Impressions_Day_3.php http://www.gamasutra.com/blogs/RobertBoyd/20110307/7133/GDC_Saves_the_World__Impressions_Day_4.php http://www.gamasutra.com/blogs/RobertBoyd/20110307/7160/GDC_Saves_the_World__Impressions_Day_5.php Phillipe Da Silva releases new IGF Pong Sample preview http://www.vimeo.com/20904070 Xbox LIVE Indie Games (XBLIG): Gamergeddon posts XBox Indie Game Roundup for March 6th http://www.gamergeddon.com/2011/03/06/xbox-indie-game-round-up-march-6th/ Dealspwn interviews FortressCraft developer Projector Games http://www.dealspwn.com/fortresscraft-developer-interview-minecraft-clones-venting-haters-part-1/ http://www.dealspwn.com/fortresscraft-developer-interview-part-2-trials-tribulations-indie-development/ Writings of Mass Destruction continues the Xbox LIVE Indie Game a day campaign, here’s his take on FishCraft (be sure to check out his other posts!) http://writingsofmassdeduction.com/2011/03/05/day-116-fishcraft/ Tom Ogburn shares his GDC notes on the XBLIG panel jotted quickly while attending the panel http://twitter.com/#!/TOgburn/status/44454191028125696 http://www.starlitskygames.com/blogs/site_news/archive/2011/03/06/802.aspx Dave Voyles of Armless Octopus has crazy good coverage on XNA and Xbox LIVE Indie Game developers at GDC 2011. Interviews and articles all extremely well done! http://www.armlessoctopus.com/2011/03/06/gdc-2011-successful-indie-developers-share-insight-on-microsofts-self-publishing-service/ There’s honestly so many posts and interviews you should just hit his front page and scroll down through all of the latest ones. http://www.armlessoctopus.com/ GameMarx Episode 12 http://www.gamemarx.com/video/the-show/27/ep-12-march-4-2011.aspx B.U.T.T.O.N now on Steam! http://www.gamesetwatch.com/2011/03/button_party_game_now_on_steam.php German Xbox Dashboard gets review program from GamePro http://www.armlessoctopus.com/2011/03/07/gamepo-indie-review-show-debuts-on-german-xbox-dashboard/ XboxIndies.com (one of the best XNA sites out there at this point!) continues to add review sites to it’s main review feed. (And don’t forget to play with that awesome XBLIG pivot control!) http://xboxindies.com/ Kris Steele of FunInfused Games shares early footage of his game World of Chalk http://twitter.com/#!/kriswd40/status/45007114371989504 Raymond Matthews of Darkstarmatryx reviews FunInfused Games Abduction Action http://www.darkstarmatryx.com/?p=264 TheVideoGamerRob reviews Zombie Football Carnage http://videogamerrob.wordpress.com/2011/03/08/xblig-review-zombie-football-carnage/ XBLIG Square Off Making the Jump to WP7 http://www.wp7connect.com/2011/03/08/xblig-square-off-will-make-the-jump-to-windows-phone/ Mommy’s Best Games making the news round with their Serious Sam announcement http://www.joystiq.com/2011/03/09/serious-sam-gets-serious-indie-cred-with-new-indie-series/ Most quoted and linked XBLIG article of the week with the least amount of actual facts and reporting. Shared only because it makes me sad that this is the best coverage we get. (Hey reporters, there’s LOT and LOTS of XBLIG and XNA experts you can contact if you need to check up on facts or wonder why on questions like, Why can’t XBLIGs have Nazis? There’s actually a real answer for that..) http://www.joystiq.com/2011/03/06/xblig-facts-nazi-killing-a-no-no-revenue-a-yes-yes/ XNA Development: Mort8088 has been in an XNA tutorial writing frenzy releasing 4 XNA 4.0 entry level tutorials this week! http://mort8088.com/2011/03/06/xna-4-0-tutorial-0-intro/ http://mort8088.com/2011/03/06/xna-4-0-tutorial-1-fonts/ http://mort8088.com/2011/03/06/xna-4-0-tutorial-2-sprites/ http://mort8088.com/2011/03/06/xna-4-0-tutorial-3-input-from-keyboard/ Interesting discussion on what it means to be a community (you do have to sign up to be a member of the XNA UK forums to read it...) http://twitter.com/#!/XNAUK/status/44705269254594560 Slyprid continues his incredible pace on Transmute and shares screens of his new Animation Builder http://twitter.com/#!/slyprid/status/45169271847911424 http://forgottenstarstudios.com/blog/ Philippe Da Silva wants to know who is using IGF for their games. If it’s you, drop him a note letting him know! http://twitter.com/#!/philippedasilva/status/44325893719588864 New Sunburn Video Tutorials released http://www.synapsegaming.com/blogs/fivesidedbarrel/archive/2011/03/07/new-documentation-video-tutorials.aspx Loading and rendering animated collada models using XNA 4.0 http://bunkernetz.wordpress.com/2011/03/09/loading-and-rendering-animated-collada-models-using-xna-4-0/ XNA for Silverlight Developers Part 6 Accelerometer Input http://buzzgamesnews.blogspot.com/2011/03/xna-for-silverlight-developers-part-6.html

Read the article

NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

- by Jagged

I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

Read the article

Is there a Generic USB TouchScreen Driver 12.04?

- by lbjoum

Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

Read the article

Drivers for NVIDIA 520M not working in Ubuntu 12.04

- by Don

I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

Read the article

Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

- by YumYumYum

From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

Read the article

Package management fails in update-manager with gzip problems and compilation errors. U12.04LTS

- by HarveyP

Similar to but not the same as Package management system corrupted. Cannot install or remove packages. U12.04LTS (an earlier problem) with package management system. Followed all of L. D. James suggestions in his answer to no avail. This time as well as the gzip error I am also getting compilation errors. The difference may be due to a lack of compilation in my earlier problem so it may be the same error. The packages concerned are enumerated in the output from update-manager below. Also included below that is the output from apt-get -f install apt-get autoremove gives same output. Tried update without SSL updates - 9 to install and got "Unhandled Error in aptdaemon". Output number 3 below. One at a time - output 4 - is for firefox, first in the list of packages. Falls over at libssl1.0.0 despite deselection of it from update ... Tried apt-get install --reinstall dpkg which succeeded, apt-get install --reinstall tar and apt-get install --reinstall gzip both of which failed at libssl1.0.0 as ever. (as suggested by Subv3rsion elsewhere in this forum) Now cannot apt-get update with complete success even after changing server and apt-get clean - output number 5 below ... 1). Output from update-manager The following packages will be upgraded:<> firefox firefox-globalmenu firefox-locale-en libavcodec-extra-53 libavformat53 libavutil-extra-51 libjson0 libpostproc52 libssl1.0.0 libswscale2 openssl 11 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.<br> Need to get 0 B/46.5 MB of archives. After this operation, 1,416 kB of additional disk space will be used.<br> Do you want to continue [Y/n]? y debconf: Perl may be unconfigured (Bareword "gensym" not allowed while "strict subs" in use at /usr/lib/perl/5.14/IO/Handle.pm line 67. BEGIN not safe after errors--compilation aborted at /usr/lib/perl/5.14/IO/Handle.pm line 366. Compilation failed in require at /usr/lib/perl/5.14/IO/Seekable.pm line 9. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/Seekable.pm line 9. Compilation failed in require at /usr/lib/perl/5.14/IO/File.pm line 11. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/File.pm line 11. Compilation failed in require at /usr/share/perl/5.14/FileHandle.pm line 9. Compilation failed in require at (eval 1) line 3. BEGIN failed--compilation aborted at (eval 1) line 3. ) -- aborting (Reading database ... 160575 files and directories currently installed.) Preparing to replace libssl1.0.0 1.0.1-4ubuntu5.14 (using .../libssl1.0.0_1.0.1-4ubuntu5.15_i386.deb) ... Unpacking replacement libssl1.0.0 ... dpkg-deb (subprocess): data: internal gzip read error: '<fd:4>: data error' dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg: error processing /var/cache/apt/archives/libssl1.0.0_1.0.1-4ubuntu5.15_i386.deb (--unpack):<br> subprocess dpkg-deb --fsys-tarfile returned error exit status 2 No apport report written because MaxReports has already been reached Bareword "gensym" not allowed while "strict subs" in use at /usr/lib/perl/5.14/IO/Handle.pm line 67. BEGIN not safe after errors--compilation aborted at /usr/lib/perl/5.14/IO/Handle.pm line 366. Compilation failed in require at /usr/lib/perl/5.14/IO/Seekable.pm line 9. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/Seekable.pm line 9. Compilation failed in require at /usr/lib/perl/5.14/IO/File.pm line 11. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/File.pm line 11. Compilation failed in require at /usr/share/perl/5.14/FileHandle.pm line 9. Compilation failed in require at /usr/share/perl5/Debconf/Template.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Template.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Question.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Question.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Config.pm line 7. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Config.pm line 7. Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10. Compilation failed in require at /usr/share/perl5/Debconf/Db.pm line 7. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Db.pm line 7. Compilation failed in require at /usr/share/debconf/frontend line 6. BEGIN failed--compilation aborted at /usr/share/debconf/frontend line 6. dpkg: error whale cleanang up: subprgcess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/libssl1.0.0_1.0.1-4ubuntu5.15_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) 2). Output from install -f harveyp@harveyp:~$ sudo apt-get -f install [sudo] password for harveyp: Reading package lists... Done Building dependency tree Reading state information... Done 0 to upgrade, 0 to newly install, 0 to remove and 11 not to upgrade. 1 not fully installed or removed.<br> After this operation, 0 B of additional disk space will be used. E: Internal Error, No file name for libssl1.0.0 3). Unhandled error from aptdaemon Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1045, in _simulate trans.unauthenticated = self.__simulate(trans) File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1160, in __simulate unauthenticated = self._get_unauthenticated() File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 347, in _get_unauthenticated for pkg in self._iterate_packages(): File "/usr/lib/python2.7/dist-packages/aptdaemon/worker.py", line 1356, in _iterate_packages for enum, pkg in enumerate(self._cache): File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 216, in __iter__ yield self[pkgname] File "/usr/lib/python2.7/dist-packages/apt/cache.py", line 201, in __getitem__ pkg = self._weakref[key] = Package(self, self._cache[key]) KeyError: 'librqrcode-rubq-doc 4). output from update of firefox installArchives() failed: Error in function: < Setting up libssl1.0.0 (1.0.1-4ubuntu5.14) ... Bareword "gensym" not allowed while "strict subs" in use at /usr/lib/perl/5.14/IO/Handle.pm line 67. BEGIN not safe after errors--compilation aborted at /usr/lib/perl/5.14/IO/Handle.pm line 366. Compilation failed in require at /usr/lib/perl/5.14/IO/Seekable.pm line 9. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/Seekable.pm line 9. Compilation failed in require at /usr/lib/perl/5.14/IO/File.pm line 11. BEGIN failed--compilation aborted at /usr/lib/perl/5.14/IO/File.pm line 11. Compilation failed in require at /usr/share/perl/5.14/FileHandle.pm line 9. Compilation failed in require at /usr/share/perl5/Debconf/Template.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Template.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Question.pm line 8. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Question.pm line 8. Compilation failed in require at /usr/share/perl5/Debconf/Config.pm line 7. BEGIN failed--compilation aborted at /usr/share/perl5/Debconf/Config.pm line 7. Compilation failed in require at /usr/share/perl5/Debconf/Log.pm line 10. 5. output from apt-get update ...snip ... Hit http://ubuntu-archive.mirrors.free.org precise-security/multiverse Translation-en Hit http://ubuntu-archive.mirrors.free.org precise-security/restricted Translation-en Hit http://ubuntu-archive.mirrors.free.org precise-security/universe Translation-en Fetched 368 kB in 6s (59.5 kB/s) W: Failed to fetch gzip:/var/lib/apt/lists/partial/ubuntu-archive.mirrors.free.org_ubuntu_dists_precise_universe_source_Sources Hash Sum mismatch E: Some index files failed to download. They have been ignored, or old ones used instead.

Read the article

Everytime i am trying to connect to my box using SSH, its failing not connecting

- by YumYumYum

From any other PC doing SSH to my Ubuntu 11.10,is failing. My network setup: Telenet ISP (Belgium) Fiber cable < RJ45 cable straight to Ubuntu PC Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ nmap 192.168.0.128 Starting Nmap 5.50 ( http://nmap.org ) at 2012-06-08 19:11 CEST Nmap scan report for 192.168.0.128 Host is up (0.00045s latency). All 1000 scanned ports on 192.168.0.128 are closed (842) or filtered (158) Nmap done: 1 IP address (1 host up) scanned in 6.86 seconds ubuntu@ubuntu:~$ netstat -aunt | head Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 1 192.168.0.128:58616 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:56749 199.7.57.72:80 ESTABLISHED tcp 0 1 192.168.0.128:58614 74.125.132.99:80 FIN_WAIT1 tcp 0 0 192.168.0.128:49916 173.194.65.113:443 ESTABLISHED tcp 0 1 192.168.0.128:45699 64.34.119.101:80 SYN_SENT tcp 0 0 192.168.0.128:48404 64.34.119.12:80 ESTABLISHED tcp 0 0 192.168.0.128:54161 67.201.31.70:80 TIME_WAIT $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 $ apt-get install openipml openhpi-plugin-ipml $ openipmish > help redisp_cmd on|off > redisp_cmd on redisp set Final follow up: Step 1: BUG for network card driver r8169 Step 2: get the latest build version http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=4&PFid=4&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true#RTL8110SC(L) Step 3: build / make $ cd /var/tmp/driver $ tar xvfj r8169.tar.bz2 $ make clean modules && make install $ rmmod r8169 $ depmod $ cp src/r8169.ko /lib/modules/3.xxxx/kernel/drivers/net/r8169.ko $ modprobe r8169 $ update-initramfs -u $ init 6 Voila!!

Read the article

How do I prevent missing network from slowing down boot-up?

- by Ravi S Ghosh

I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

Read the article

CodePlex Daily Summary for Thursday, November 03, 2011

CodePlex Daily Summary for Thursday, November 03, 2011Popular ReleasesFlagConsole: 1.0.1: BUGFIXES: - Fixed a bug, which caused the label not to draw a word, if it had the same length as the label's length.Nearforums - ASP.NET MVC forum engine: Nearforums v7.0: Version 7.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: UI: Flexible layout to handle both list and table-like template layouts. Theming - Visual choice of themes: Deliver some templates on installation, export/import functionality, preview. Allow site owners to choose default list sort order for the forums. Forum latest activity. Visit the project Roadmap for more details.?????????? - ????????: All-In-One Code Framework ??? 2011-11-02: http://download.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1codechs&DownloadId=216140 ??????，11??，?????20????Microsoft OneCode Sample，????6?Program Language Sample，2?Windows Base Sample，2?GDI+ Sample，4?Internet Explorer Sample?6?ASP.NET Sample。?????????????。 ????，?????。http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 Program Language CSImageFullScreenSlideShow VBImageFullScreenSlideShow CSDynamicallyBuildLambdaExpressionWithFie...Python Tools for Visual Studio: 1.1 Alpha: We’re pleased to announce the release of Python Tools for Visual Studio 1.1 Alpha. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python programming language. This release includes new core IDE features, a couple of new sample libraries for interacting with Kinect and Excel, and many bug fixes for issues reported since the release of 1.0. For the core IDE features we’ve added many new features which improve the basic edit...BExplorer (Better Explorer): Better Explorer 2.0.0.631 Alpha: Changelog: Added: Some new functions in ribbon Added: Possibility to choose displayed columns Added: Basic Search Fixed: Some bugs after navigation Fixed: Attempt to fix slow navigation and slow start Known issues: - BreadcrumbBar fails on some situations - Basic search not work quite well in some situations Please if anyone find bugs be kind and report them at the Issue Tracker! Thanks!DotNetNuke® Community Edition: 05.06.04: Major Highlights Fixed issue with upgrades on systems that had upgraded the Telerik library to 6.0.0 Fixed issue with Razor Host upgrade to 5.6.3 The logic for module administration checks contains incorrect logic in 1 place, opening the possibility of a user with edit permissions gaining access to functionality they should not have through a particularly crafted url Security FixesBrowsers support the ability to remember common strings such as usernames/addresses etc. Code was adde...Terminals: Version 2.0 - Beta 2 Release: The team has finally put the nail into the official release date for version 2.0. As bugs are winding down on the 2.0 Roadmap we decided to push out another build - the first 2.0 Beta build. Please take time to use and abuse this release. We left logging in place, and this is a debug build so be sure to submit your logs on each bug reported, and please do report all bugs! Check the source code page on the site, this beta includes all commits since (and including) the 90428 check-in back i...iTuner - The iTunes Companion: iTuner 1.4.4322: Added German (unverified, apologies if incorrect) Properly source invariant resources with correct resIDs Replaced obsolete lyric providers with working providers Fix Pseudolater to correctly morph every third char Fix null reference in CatalogBaseTrack Folder Changes: Track Folder Changes 1.0: Track Folder Changes 1.0 (binary)Devpad: 4.6: Whats new for Devpad 4.6: New Recent Files New Run in Safari Minor Bug Fix's, improvements and speed upsWindows Workflow Foundation on Codeplex: Microsoft.Activities v1.8.8: Microsoft.Activities Overview How do I install Microsoft.Activities? Updates in this release9318Technical Analysis Engine for .NET: Technical Analysis Engine 1.25: What's new in the 1.25 release (2011-11-01): - Added Williams %R indicator - Added Moving Average Envelopes indicatorBoxWorld: BoxWorld_2011.10.30: BoxWorld - 8.0.1110.30 This is the initial release of BoxWorld. I'd recommend downloading the installer as it contains the compiled code and everything all nicely contained. By default, you end up with this directory structure: C:\Program Files\ViperWorks\BoxWorld C:\Program Files\ViperWorks\BoxWorld\Data C:\Program Files\ViperWorks\BoxWorld\Interface C:\Program Files\ViperWorks\BoxWorld\Source In the root you have the compiled EXE files, one for the main release, one for the LITE release ...VidCoder: 1.2.1: Fixed a couple regressions: video encoder was blank in queue and crashes with the High Profile preset when opening the Settings window. Fixed problem with auto-update introduced in 1.2.0. If you have 1.2.0 you will need to update manually to get this.AssaultCube Reloaded: Release 2.3: THE RELEASE YOU'VE ALL BEEN WAITING FOR! IT CAN NOW BE CONSIDERED STABLE Linux has Debian 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. The server pack is ready for both Windows and Linux, but you might need to compile your own for linux (source included) If you are using Windows and require the source code, download the source package!A Microblog API (SINA weibo.com open API in C#, .Net???????API): AMicroblogAPI v1.0: AMicroBlogAPI is a C# implementation, a strong-typed deep encapsulation, a easy-to-use .net wrapper of SINA microblog API v1.0. App developers no longer need to parse various HTTP responses -- all responses are parsed into strong types; No longer need to construt the request query strings -- just simply gives the values of parameters; No longer need to implement the OAuth -- a single call could logs the user on. In this release (AMicroblogAPI v1.0), all basic data APIs are implemented. For ...patterns & practices: Enterprise Library Contrib: Enterprise Library Contrib - 5.0 (Oct 2011): This release of Enterprise Library Contrib is based on the Microsoft patterns & practices Enterprise Library 5.0 core and contains the following: Common extensionsTypeConfigurationElement<T> - A Polymorphic Configuration Element without having to be part of a PolymorphicConfigurationElementCollection. AnonymousConfigurationElement - A Configuration element that can be uniquely identified without having to define its name explicitly. Data Access Application Block extensionsMySql Provider - ...Network Monitor Open Source Parsers: Network Monitor Parsers 3.4.2748: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, NetowrkMonitor_Parsers.msi continues to improve quality and fix bugs. It has included the fo...Duckworth Lewis Professional Edition Calculator: DLcalc 3.0: DLcalc 3.0 can perform Duckworth/Lewis Professional Edition calculations 100% accurately. It also produces over-by-over and ball-by-ball PAR score tables.Media Companion: MC 3.420b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Movies Fixed: Fanart and poster scraping issues TV Shows (Re)Added: Rebuild single show Fixed: Issue when shows are moved from original location Ability to handle " for actor nicknames Crash when episode name contains "<" (does not scrape yet) Clears fanart when switch...New ProjectsASP.NET MVC fluent validation framework: FluentMvc allow you to create validatable models without using any validation attributes.BeanPermutator: The BeanPermutator library provides a robust permutations engine. It was designed with framework API, optimal performance, and memory usage in mind. For performance, the implementation is modeled after STL's next_permutation; except with added support for conditional result sets.Cicero: Cicero is a library/application to programmatically analyze managed crash dumps. It provides a managed API to load dumps and look at managed objects, using [url:SOS|http://msdn.microsoft.com/en-us/library/bb190764.aspx] under the covers.CodePlex Windows Phone App: This project deals with how to browse efficently through codeplex website using windows phone capabilities.Collage: A photo collage screensaver.Docs Professional Archiving System: This application basically provides a professional audit compliant archiving system with storage service.EBSCOLunch: This app simply shows ebsco's lunch menu. It runs in the system tray and when clicked on shows today's cafeteria specials.Emesary: C# Interobject communication and application mssaging: Simple quick and efficient class based interobject communcation to allow decoupled disparate parts of a system to function together without knowing about each, e.g GUI, DB and business logic.Enterprise Data Entry, Reporting and Analysis Tool: This project will have app with different modules that will show the interface tools functions based on the designation of an employee as defined in Active Directory. Example: A team manager can view all the details regarding his immediate subordinates. Financial date and time libary: Date and time routines that know about holidays, rolling conventions, and day count fractions.Frame Work Model by Patán: Proyecto de modelado de FrameworkIttxa: Is in Alpha releaseKooboo CMS data sync module: Kooboo cms data export / import module.MetroBlog: A Windows 8 Metro inspired blog. Mosque: In the name of GOD this is a portalMPO tools: A .net library for parsing .mpo stereo images (in Multi-Picture Format).mytest5: my testtttttttttNetflix MVP Example: Example .NET movie application using the MVP pattern with windows forms and WPF. Uses the Netflix Odata service to get movie information.OpenStreetMap2Oracle: OpenStreetMap2Oracle is a windows application, which exports OpenStreetMap Data (*.osm - files) in an oracle database. The geometries will be stored in oracle's SDO_GEOMETRY datatype. It is developed in C Sharp with modern WPF - UI. PSRR - Remote Registry PowerShell 3.0 Module: Remote Registry PowerShell Module to manage the registry with Windows PowerShell. This version supports the new improvement in .NET 4 to specify a 32-bit or 64-bit view of the registry with the Microsoft.Win32.RegistryView enumeration when you open base keys.Raptor-Plus-Plus: CS240 class project Reset IPv6: Troubleshooting Pack to reset virtual IPv6 interfaces on Windows 7 (ISATAP, Teredo, IPHTTPS and 6to4)resurection: Game for WP7SharePoint 2010 Google Maps Web Part for Sandbox and Farm Solutions: The Google Maps Web Part lets you quickly and easily add Google Maps to your Microsoft SharePoint 2010 pages. Compatible with SharePoint 2010, SharePoint 2010 SP1 and SharePoint Online, via Office 365.SPLight UTL Sharepoint 2010 BackUp / Restore UI: Sharepoint 2010 BackUp / Restore UI Sharepoint 2010 backUp restore user interface site collection backup restore graphical user interfaceVisual Image Processing: Visual Image processing for 2d or 3d real-time video or still image from camera or web cam or scanner ... XNA4LED: XNA 4.0 LED Billboard Example

Read the article

Our winners- and some BBQ for everyone

- by Steve Tunstall

Congrats to our two winners for the first two comments on my last entry. Steve from Australia and John Lemon. Steve won since he was the first person over the International Date Line to see the post I made so late after a workday on Friday. So not only does he get to live in a country with the 2nd most beautiful women in the world, but now he gets some cool Oracle Swag, too. (Yes, I live on the beach in southern California, so you can guess where 1st place is for that other contest…Now if Steve happens to live in Manly, we may actually have a tie going…) OK, ok, for everyone else, you can be winners, too. How you ask? I will make you the envy of every guy and gal in your neighborhood or campsite. What follows is the way to smoke the best ribs you or anyone you know have ever tasted. Follow my instructions and give it a try. People at your party/cookout/campsite will tell you that they’re the best ribs they’ve ever had, and I will let you take all the credit. Yes, I fully realize this post is going to be longer than any post I’ve done yet. But let’s get serious here. Smoking meat is much more important, agreed? J In all honesty, this is a repeat of another blog I did, so I’m just copying and pasting. Step 1. Get some ribs. I actually really like Costco’s pack. They have both St. Louis and Baby Back. (They are the same ribs, but cut in half down the sides. St. Louis style is the ‘front’ of the ribs closest to the stomach, and ‘Baby back’ is the part of the ribs where is connects to the backbone). I like them both, so here you see I got one pack of each. About 4 racks to a pack. So these two packs for $25 each will feed about 16-20 of my guests. So around 3 bucks a person is a pretty good deal for the best ribs you’ll ever have. Step 2. Prep the ribs the night before you’re going to smoke. You need to trim them to fit your smoker racks, and also take off the membrane and add your rub. Then cover and set in fridge overnight. Here’s how to take off the membrane, which will not break down with heat and smoke like the rest of the meat, so must be removed. Use a butter knife to work in a ways between the membrane and the white bone. Just enough to make room for your finger. Try really hard not to poke through the membrane, you want to keep it whole. See how my gloved fingers can now start to lift up and pull off the membrane? This is what you are trying to do. It’s awesome when the whole thing can come off at once. This one is going great, maybe the best one I’ve ever done. Sometime, it falls apart and doesn't come off in one nice piece. I hate when that happens. Now, add your rub and pat it down once into the meat with your other hand. My rub is not secret. I got it from my mentor, a BBQ competitive chef who is currently ranked #1 in California and #3 in the nation on the BBQ circuit. He does full-day classes in southern California if anyone is interested in taking his class. Go to www.slapyodaddybbq.com to check him out. I tweaked his run recipe a tad and made my own. It’s one part Lawry’s, one part sugar, one part Montreal Steak Seasoning, one part garlic powder, one-half part red chili powder, one-half part paprika, and then 1/20th part cayenne. You can adjust that last ingredient, or leave it out. Real cheap stuff you can get at Costco. This lets you make enough rub to last about a year or two. Don’t make it all at once, make a shaker’s worth and use it up before you make more. Place it all in a bowl, mix well, and then add to a shaker like you see here. You can get a shaker with medium sized holes on it at any restaurant supply store or Smart & Final. The kind you see at pizza places for their red pepper flakes works best. Now cover and place in fridge overnight. Step 3. The next day. Ok, I’m ready to go. Get your stuff together. You will need your smoker, some good foil, a can of peach nectar, a bottle of Agave syrup, and a package of brown sugar. You will need this stuff later. I also use a clean spray bottle, and apple juice. Step 4. Make your fire, or turn on your electric smoker. In this example I’m using my portable charcoal smoker. I got this for only $40. I then modified it to be useful. Once modified, these guys actually work very well. Trust me, your food DOES NOT KNOW how expensive your smoker is. Someone who tells you that you need to spend a bunch of money on a smoker is an idiot. I also have an electric smoker that stays in my backyard. It’s cleaner and larger so I can smoke more food. But this little $40 one works great for going camping. Here is what my fire-bowl looks like. I leave a space in the middle open, and place cold charcoal and wood chucks in a circle going outwards. This makes it so when I dump the hot coals down the middle, they will slowly burn outwards, hitting different wood chucks at different times, allowing me to go 4-5 hours without having to even touch my fire. For ribs, I use apple and pecan wood. Pecan works for anything. Apple or any fruit wood is excellent for pork. So now I make my hot charcoal with a chimney only about half-full. I found a great use for that side-burner on my grill that I never use. It makes a fantastic chimney starter. You never use fluids of any kind, nor ever use that stupid charcoal that has lighter fluid built into it. Never, ever, ever. Step 5. Smoke. Add your ribs in the racks and stack them up in your smoker. I have a digital thermometer on a probe that I use to keep track of the temp in the smoker. I just lay the probe on the top rack and shut the lid. This cheap guy is a little harder to maintain the right temperature of around 225 F, so I do have to keep my eye on it more than my electric one or a more expensive charcoal one with the cool gadgets that regulate your temp for you. Every hour, spray apple juice all over your ribs using that spray bottle. After about 3 hours, you should have a very good crust (called the Bark) on your ribs. Once you have the Bark where you want it, carefully remove your ribs and place them in a tray. We are now ready for a very important part to make the flavor. Get a large piece of foil and place one rib section on it. Splash some of the peach nectar on it, and then a drizzle of the Agave syrup. Then, use your gloved hand to pack on some brown sugar. Do this on BOTH sides, and then completely wrap it up TIGHT in the foil. Do this for each rib section, and then place all the wrapped sections back into the smoker for another 4 to 6 hours. This is where the meat will get tender and flavorful. The first three hours is only to make the smoke bark. You don’t need smoke anymore, since the ribs are wrapped, you only need to keep the heat around 225 for the next 4-6 hours. Obviously you don’t spray anymore. Just time and slow heat. Be patient. It’s actually really hard to overdo it. You can let them go longer, and all that will happen is they will get even MORE tender!!! If you take them out too soon, they will be tough. How do you know? Take out one package (use long tongs) and open it up. If you grab a bone with your tongs and it just falls apart and breaks away from the rest of the meat, you are done!!! Enjoy!!! Step 6. Eat. It pulls apart like this when it’s done. By the way, smoking tri-tip is way easier. Just rub it with the same rub, and put in your smoker for about 2.5 hours at 250 F. That’s it. Low-maintenance. It comes out like this, with a fantastic smoke ring and amazing flavor. Thanks, and I will put up another good tip, about the ZFSSA, around the end of November. Steve

Read the article

usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

- by Sandro Dzneladze

I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

Read the article

Slow boot on Ubuntu 12.04, probable cause the network connection

- by Ravi S Ghosh

I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

Read the article

Ten - oh, wait, eleven - Eleven things you should know about the ASP.NET Fall 2012 Update

- by Jon Galloway

Today, just a little over two months after the big ASP.NET 4.5 / ASP.NET MVC 4 / ASP.NET Web API / Visual Studio 2012 / Web Matrix 2 release, the first preview of the ASP.NET Fall 2012 Update is out. Here's what you need to know: There are no new framework bits in this release - there's no change or update to ASP.NET Core, ASP.NET MVC or Web Forms features. This means that you can start using it without any updates to your server, upgrade concerns, etc. This update is really an update to the project templates and Visual Studio tooling, conceptually similar to the ASP.NET MVC 3 Tools Update. It's a relatively lightweight install. It's a 41MB download. I've installed it many times and usually takes 5-7 minutes; it's never required a reboot. It adds some new project templates to ASP.NET MVC: Facebook Application and Single Page Application templates. It adds a lot of cool enhancements to ASP.NET Web API. It adds some tooling that makes it easy to take advantage of features like SignalR, Friendly URLs, and Windows Azure Authentication. Most of the new features are installed via NuGet packages. Since ASP.NET is open source, nightly NuGet packages are available, and the roadmap is published, most of this has really been publicly available for a while. The official name of this drop is the ASP.NET Fall 2012 Update BUILD Prerelease. Please do not attempt to say that ten times fast. While the EULA doesn't prohibit it, it WILL legally change your first name to Scott. As with all new releases, you can find out everything you need to know about the Fall Update at http://asp.net/vnext (especially the release notes!) I'm going to be showing all of this off, assisted by special guest code monkey Scott Hanselman, this Friday at BUILD: Bleeding edge ASP.NET: See what is next for MVC, Web API, SignalR and more… (and I've heard it will be livestreamed). Let's look at some of those things in more detail. No new bits ASP.NET 4.5, MVC 4 and Web API have a lot of great core features. I see the goal of this update release as making it easier to put those features to use to solve some useful scenarios by taking advantage of NuGet packages and template code. If you create a new ASP.NET MVC application using one of the new templates, you'll see that it's using the ASP.NET MVC 4 RTM NuGet package (4.0.20710.0): This means you can install and use the Fall Update without any impact on your existing projects and no worries about upgrading or compatibility. New Facebook Application Template ASP.NET MVC 4 (and ASP.NET 4.5 Web Forms) included the ability to authenticate your users via OAuth and OpenID, so you could let users log in to your site using a Facebook account. One of the new changes in the Fall Update is a new template that makes it really easy to create full Facebook applications. You could create Facebook application in ASP.NET already, you'd just need to go through a few steps: Search around to find a good Facebook NuGet package, like the Facebook C# SDK (written by my friend Nathan Totten and some other Facebook SDK brainiacs). Read the Facebook developer documentation to figure out how to authenticate and integrate with them. Write some code, debug it and repeat until you got something working. Get started with the application you'd originally wanted to write. What this template does for you: eliminate steps 1-3. Erik Porter, Nathan and some other experts built out the Facebook Application template so it automatically pulls in and configures the Facebook NuGet package and makes it really easy to take advantage of it in an ASP.NET MVC application. One great example is the the way you access a Facebook user's information. Take a look at the following code in a File / New / MVC / Facebook Application site. First, the Home Controller Index action: [FacebookAuthorize(Permissions = "email")] public ActionResult Index(MyAppUser user, FacebookObjectList<MyAppUserFriend> userFriends) { ViewBag.Message = "Modify this template to jump-start your Facebook application using ASP.NET MVC."; ViewBag.User = user; ViewBag.Friends = userFriends.Take(5); return View(); } First, notice that there's a FacebookAuthorize attribute which requires the user is authenticated via Facebook and requires permissions to access their e-mail address. It binds to two things: a custom MyAppUser object and a list of friends. Let's look at the MyAppUser code: using Microsoft.AspNet.Mvc.Facebook.Attributes; using Microsoft.AspNet.Mvc.Facebook.Models; // Add any fields you want to be saved for each user and specify the field name in the JSON coming back from Facebook // https://developers.facebook.com/docs/reference/api/user/ namespace MvcApplication3.Models { public class MyAppUser : FacebookUser { public string Name { get; set; } [FacebookField(FieldName = "picture", JsonField = "picture.data.url")] public string PictureUrl { get; set; } public string Email { get; set; } } } You can add in other custom fields if you want, but you can also just bind to a FacebookUser and it will automatically pull in the available fields. You can even just bind directly to a FacebookUser and check for what's available in debug mode, which makes it really easy to explore. For more information and some walkthroughs on creating Facebook applications, see: Deploying your first Facebook App on Azure using ASP.NET MVC Facebook Template (Yao Huang Lin) Facebook Application Template Tutorial (Erik Porter) Single Page Application template Early releases of ASP.NET MVC 4 included a Single Page Application template, but it was removed for the official release. There was a lot of interest in it, but it was kind of complex, as it handled features for things like data management. The new Single Page Application template that ships with the Fall Update is more lightweight. It uses Knockout.js on the client and ASP.NET Web API on the server, and it includes a sample application that shows how they all work together. I think the real benefit of this application is that it shows a good pattern for using ASP.NET Web API and Knockout.js. For instance, it's easy to end up with a mess of JavaScript when you're building out a client-side application. This template uses three separate JavaScript files (delivered via a Bundle, of course): todoList.js - this is where the main client-side logic lives todoList.dataAccess.js - this defines how the client-side application interacts with the back-end services todoList.bindings.js - this is where you set up events and overrides for the Knockout bindings - for instance, hooking up jQuery validation and defining some client-side events This is a fun one to play with, because you can just create a new Single Page Application and hit F5. Quick, easy install (with one gotcha) One of the cool engineering changes for this release is a big update to the installer to make it more lightweight and efficient. I've been running nightly builds of this for a few weeks to prep for my BUILD demos, and the install has been really quick and easy to use. The install takes about 5 minutes, has never required a reboot for me, and the uninstall is just as simple. There's one gotcha, though. In this preview release, you may hit an issue that will require you to uninstall and re-install the NuGet VSIX package. The problem comes up when you create a new MVC application and see this dialog: The solution, as explained in the release notes, is to uninstall and re-install the NuGet VSIX package: Start Visual Studio 2012 as an Administrator Go to Tools->Extensions and Updates and uninstall NuGet. Close Visual Studio Navigate to the ASP.NET Fall 2012 Update installation folder: For Visual Studio 2012: Program Files\Microsoft ASP.NET\ASP.NET Web Stack\Visual Studio 2012 For Visual Studio 2012 Express for Web: Program Files\Microsoft ASP.NET\ASP.NET Web Stack\Visual Studio Express 2012 for Web Double click on the NuGet.Tools.vsix to reinstall NuGet This took me under a minute to do, and I was up and running. ASP.NET Web API Update Extravaganza! Uh, the Web API team is out of hand. They added a ton of new stuff: OData support, Tracing, and API Help Page generation. OData support Some people like OData. Some people start twitching when you mention it. If you're in the first group, this is for you. You can add a [Queryable] attribute to an API that returns an IQueryable<Whatever> and you get OData query support from your clients. Then, without any extra changes to your client or server code, your clients can send filters like this: /Suppliers?$filter=Name eq ‘Microsoft’ For more information about OData support in ASP.NET Web API, see Alex James' mega-post about it: OData support in ASP.NET Web API ASP.NET Web API Tracing Tracing makes it really easy to leverage the .NET Tracing system from within your ASP.NET Web API's. If you look at the \App_Start\WebApiConfig.cs file in new ASP.NET Web API project, you'll see a call to TraceConfig.Register(config). That calls into some code in the new \App_Start\TraceConfig.cs file: public static void Register(HttpConfiguration configuration) { if (configuration == null) { throw new ArgumentNullException("configuration"); } SystemDiagnosticsTraceWriter traceWriter = new SystemDiagnosticsTraceWriter() { MinimumLevel = TraceLevel.Info, IsVerbose = false }; configuration.Services.Replace(typeof(ITraceWriter), traceWriter); } As you can see, this is using the standard trace system, so you can extend it to any other trace listeners you'd like. To see how it works with the built in diagnostics trace writer, just run the application call some API's, and look at the Visual Studio Output window: iisexpress.exe Information: 0 : Request, Method=GET, Url=http://localhost:11147/api/Values, Message='http://localhost:11147/api/Values' iisexpress.exe Information: 0 : Message='Values', Operation=DefaultHttpControllerSelector.SelectController iisexpress.exe Information: 0 : Message='WebAPI.Controllers.ValuesController', Operation=DefaultHttpControllerActivator.Create iisexpress.exe Information: 0 : Message='WebAPI.Controllers.ValuesController', Operation=HttpControllerDescriptor.CreateController iisexpress.exe Information: 0 : Message='Selected action 'Get()'', Operation=ApiControllerActionSelector.SelectAction iisexpress.exe Information: 0 : Operation=HttpActionBinding.ExecuteBindingAsync iisexpress.exe Information: 0 : Operation=QueryableAttribute.ActionExecuting iisexpress.exe Information: 0 : Message='Action returned 'System.String[]'', Operation=ReflectedHttpActionDescriptor.ExecuteAsync iisexpress.exe Information: 0 : Message='Will use same 'JsonMediaTypeFormatter' formatter', Operation=JsonMediaTypeFormatter.GetPerRequestFormatterInstance iisexpress.exe Information: 0 : Message='Selected formatter='JsonMediaTypeFormatter', content-type='application/json; charset=utf-8'', Operation=DefaultContentNegotiator.Negotiate iisexpress.exe Information: 0 : Operation=ApiControllerActionInvoker.InvokeActionAsync, Status=200 (OK) iisexpress.exe Information: 0 : Operation=QueryableAttribute.ActionExecuted, Status=200 (OK) iisexpress.exe Information: 0 : Operation=ValuesController.ExecuteAsync, Status=200 (OK) iisexpress.exe Information: 0 : Response, Status=200 (OK), Method=GET, Url=http://localhost:11147/api/Values, Message='Content-type='application/json; charset=utf-8', content-length=unknown' iisexpress.exe Information: 0 : Operation=JsonMediaTypeFormatter.WriteToStreamAsync iisexpress.exe Information: 0 : Operation=ValuesController.Dispose API Help Page When you create a new ASP.NET Web API project, you'll see an API link in the header: Clicking the API link shows generated help documentation for your ASP.NET Web API controllers: And clicking on any of those APIs shows specific information: What's great is that this information is dynamically generated, so if you add your own new APIs it will automatically show useful and up to date help. This system is also completely extensible, so you can generate documentation in other formats or customize the HTML help as much as you'd like. The Help generation code is all included in an ASP.NET MVC Area: SignalR SignalR is a really slick open source project that was started by some ASP.NET team members in their spare time to add real-time communications capabilities to ASP.NET - and .NET applications in general. It allows you to handle long running communications channels between your server and multiple connected clients using the best communications channel they can both support - websockets if available, falling back all the way to old technologies like long polling if necessary for old browsers. SignalR remains an open source project, but now it's being included in ASP.NET (also open source, hooray!). That means there's real, official ASP.NET engineering work being put into SignalR, and it's even easier to use in an ASP.NET application. Now in any ASP.NET project type, you can right-click / Add / New Item... SignalR Hub or Persistent Connection. And much more... There's quite a bit more. You can find more info at http://asp.net/vnext, and we'll be adding more content as fast as we can. Watch my BUILD talk to see as I demonstrate these and other features in the ASP.NET Fall 2012 Update, as well as some other even futurey-er stuff!

Read the article

top tweets WebLogic Partner Community – November 2011

- by JuergenKress

Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity glassfish GlassFish Marek’s JAX-RS 2.0 content from Devoxx 2011 – bit.ly/sp2NJO chriscmuir chriscmuir New blog post: ADF bug: missing af:column borders in af:table for IE7 – t.co/81np2jug chriscmuir chriscmuir Reading: Oracle’s ADF Rich Client User Interface (RCUI) Guidelines – oracle.com/webfolder/ux/m… netbeans NetBeans Team Bottlenecks be gone! #Java Performance Tuning workshop in Munich w Kirk Pepperdine, Nov 29-Dec 2: ow.ly/7Akh5 OracleBlogs OracleBlogs Creating ADF Faces Comamnd Button at Runtime ow.ly/1fM9dE alexismp Alexis MP blogged "GlassFish Back from Devoxx 2011, Mature Java EE 6 and EE 7 well on its way" – bit.ly/rP8LV0 JDeveloper JDeveloper & ADF Usage of jQuery in ADF dlvr.it/x3t84 20 hours ago Favorite Retweet Reply OTNArchBeat OTNArchBeat Webcast: Introducing Oracle WebLogic Server 12c: Developer Deep Dive – Dec 1 – 11am PT / 2pm ET bit.ly/t61W4G oraclepartners ORCL PartnerNetwork Brand new Oracle WebLogic 12c will launch on December 1, 10AM PT with a global Webcast highlighting salient… t.co/aflQQ3IX OracleBlogs OracleBlogs JDeveloper and ADF at UKOUG t.co/2CQTiB9n fnimphiu Frank Nimphius Attending UKOUG? All ADF sessions at a glance: t.co/TcMNTMXp 21 Nov Favorite Retweet Reply JDeveloper JDeveloper & ADF Free Webinar ‘ADF Task Flows for Beginners’, information and registration t.co/66jXnGgo via javafx4you javafx4you Java Developer Workshop #2 – Dec 1, 2011 @ Oracle Aoyama center in Tokyo t.co/8p9q3W2B AMIS_Services AMIS Services #vacature #Oracle #ADF ontwikkelaars. bit.ly/AMISADF Gun jezelf een nieuwe uitdaging? Meer op: dld.bz/azZ5N OracleBlogs OracleBlogs Launch Invitation: Introducing Oracle WebLogic Server 12c t.co/bRxCKwAk fnimphiu Frank Nimphius The brand new WebLogic 12c will be released on December 1st 2011 !!! Register for online launch event t.co/pPScg4Xh glassfish GlassFish Announcing Oracle WebLogic 12c – t.co/qh8TdFEl AdamBien Adam Bien Sun Coding Conventions–The Only Standard (Stop Inventing): Code written according to the Sun Coding Conventions… t.co/qaUWp5Mz wlscommunity WebLogic Community Launch Invitation: Introducing Oracle WebLogic Server 12c wp.me/p1LMIb-4y andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Custom Exception Registration for ADF BC EO Attribute fb.me/1m6nXQD52 MNEMONIC01 Michel Schildmeijer Blog by Michel Schildmeijer: "Oracle WebLogic 12c has been announced" bit.ly/vk6WQL glassfish GlassFish Tab Sweep – Coherence, SBT for GlassFish, OSGi in question, Java EE plugins, … t.co/tVIL95lj OracleBlogs OracleBlogs JavaFX 2.0 at Devoxx 2011 ow.ly/1fJ5iT JDeveloper JDeveloper & ADF Experimenting with ADF BC Application Module Pool Tuning dlvr.it/wjLC1 OracleWebLogic Oracle WebLogic Brand New #WebLogic 12c Launch Event, Dec 1 10am PT. Hasan Rizvi, SVP Fusion Middleware. Developer session. bit.ly/weblogic12clau… JDeveloper JDeveloper & ADF PopUp and Esc/Cancel operations. ADF 11g dlvr.it/whrmC JDeveloper JDeveloper & ADF BPM Workspace: issue loading ADF task flows t.co/vk1gKPx5 OpenJDK OpenJDK Kelly O’Hair — OpenJDK B24 Available : t.co/1bFws6Nw JDeveloper JDeveloper & ADF Oracle ADF setting Task flow to use same page definition file of caller page t.co/9k6UIoYZ JDeveloper JDeveloper & ADF Master Detail Data presentation and CRUD Operations. Detail records in an Editable Popup. ADF 11g t.co/H8uudR0Y JDeveloper JDeveloper & ADF Entity Attribute Validation Rule (Business Rule) based on Master View Object Attribute Example ADF 11g t.co/1agxEQcZ oracletechnet Justin Kestelyn Webcast: Oracle WebLogic Server 12c Launch/Developer Deep-Dive (Dec. 1) t.co/OVBdGKzC JDeveloper JDeveloper & ADF How to render different node icons for different tree levels dlvr.it/wY2jL JDeveloper JDeveloper & ADF Query Component with ‘dynamic’ view criteria dlvr.it/wXlF1 JDeveloper JDeveloper & ADF How to play Flash .swf file in Oracle ADF application t.co/zaSONWAH Devoxx Devoxx Duke at the #Devoxx 2011 Noxx Party! pic.twitter.com/bVJWyu1Z brhubart Bob Rhubart Adam Leftik: JavaEE adoption continues to increase, reaching 40+ million downloads this year. #qconsf11 JDeveloper JDeveloper & ADF Free #ODTUG Seminar – #ADF Task Flows for Beginners – sign up today. www3.gotomeeting.com/register/13372… java Java New Project: OpenJFX j.mp/tI4k3s #javafx #openjdk #devoxx << JavaFX is open source! /via frankmunz Frank Munz WebLogic 12c launch event Dec 1st. t.co/jQKinBqN brhubart Bob Rhubart Spring to Java EE Migration | David Heffelfinger feedly.com/k/td8ccG odtug ODTUG Mark your calendars and register for our upcoming webinars: bit.ly/dWKG1C ADF Task Flows & Measuring Scalability & Performance w/TCP myfear Markus Eisele Anybody willing to take this question? Using #JavaMail with #Weblogic Server bit.ly/stJOET AMIS_Services AMIS Services 20-22 december #training #Oracle JHeadstart #11g, productief ontwikkelen met ADF. Schrijf je in op: amis.nl/trainingen/ora… AdamBien Adam Bien Stress Testing Java EE 6 Applications – Free Article In Free Java Magazine: In the November / December 2011 issu… bit.ly/vmzKkc java Java New Tech Article: Spring to #JavaEE Migration t.co/0EvdHNxb OracleBlogs OracleBlogs WebLogic Java record SPARC T4-4 Servers Set World Record on SPECjEnterprise2010 t.co/Eu1b6ZE0 OracleBlogs OracleBlogs What Is JavaFX? ow.ly/1frb6I OTNArchBeat OTNArchBeat The openJDK Windows Binary Download | Adam Bien ow.ly/7fRiG wlscommunity WebLogic Community WebLogic – Java record – SPARC T4-4 Servers Set World Record on SPECjEnterprise2010 glassfish GlassFish "youtube.com/java" blogs.oracle.com/theaquarium/en… OTNArchBeat OTNArchBeat Beta Testing Concludes: 1Z1-102 – "Oracle WebLogic Server 11g: System Administration I" (Oracle Certification) ow.ly/7fJCl wlscommunity WebLogic Community A deep dive in Oracle WebLogic! @ Contribute – November 29th, 2011 Kontich Belgium wp.me/p1LMIb-4u glassfish GlassFish Gartner’s Latest Enterprise Application Server Magic Quadrant – Oracle’s leadership t.co/aYDqipD8 OpenJDK OpenJDK Terrence Barr – Open sourcing of JavaFX: OpenJFX Project proposed – bit.ly/uKVnEl OpenJDK OpenJDK Maurizio Cimadamore – Testing overload resolution: bit.ly/vgXAbQ java Java Java User Groups Roundup, November 2011 : t.co/hea6vVnk /via @robilad << in German JavaSpotlight The Java Spotlight Java Spotlight Episode 54: Stuart Marks on the Coinification of JDK7 goo.gl/fb/3UXoM OTNArchBeat OTNArchBeat Article Series: Migrating Spring to Java EE 6 | Arun Gupta bit.ly/twUJtz glassfish GlassFish New Java EE 6 Hands-On lab, Devoxx-approved! bit.ly/vup5uE java Java Brian Goetz’s enthusiasm for Java is palpable! #devoxx interview adf_emg ADF EMG "ADF testing with a mock framework" – what is a mock framework? Visit the forum and see: groups.google.com/forum/#!topic/… java Java Taping a bunch of interviews today with Java experts at #devoxx. View on Parleys.com tomorrow. glassfish GlassFish New screencast to configure and run a cross-machine cluster using GlassFish 3.1.1 in < 7 mins faissalb.blogspot.com/2011/11/glassf… (via @bfaissal) glassfish GlassFish Oracle Contributor Agreements – New Home! bit.ly/tD2eLo OTNArchBeat OTNArchBeat Java Magazine – by and for the Java Community- inaugural issue bit.ly/tTv8UD OTNArchBeat OTNArchBeat The Heroes of Java: Michael Hüttermann | @MyFear bit.ly/rYYOFe javafx4you javafx4you Development with #JavaFX on #Linux j.mp/uOpe69 #not_for_the_faint_of_heart java Java Contribute Technical Questions for Java Experts at #devoxx bit.ly/up2cN0 netbeans NetBeans Team A simple REST service using #NetBeans 7, #Java Servlet, and #JAXB: t.co/pKkufsD8 AdamBien Adam Bien The most beautiful, and portable slide of the whole #jaxcon for "Die Hard Java EE 6"session checked-in: kenai.com/projects/javae… jaxlondon JAX London Mark Little’s (@nmcl) excellent keynote from #jaxlondon ‘Middleware Everywhere…’ is available in full – t.co/8vBmtDJ1 AdamBien Adam Bien Calculator sample from "Die Hard Java EE 6" #jaxcon session checked-in: t.co/0UqaULfg OTNArchBeat OTNArchBeat ADF Faces – a logic bomb in the order of bean instantiations | @ChrisCMuir bit.ly/vjqRaZ OracleBlogs OracleBlogs ODI 11g y JMS Queue de Weblogic ow.ly/1fzfQJ frankmunz Frank Munz Which WebLogic book do you recommend? Review of S. Alapati’s WebLogic 11g Administration Handbook. bit.ly/rP0RtW JDeveloper JDeveloper & ADF PageFlowScope with Unbounded Task Flows: the magic sauce for multi-browser-tab support in JDeveloper ADF applications dlvr.it/vNFgn OracleBlogs OracleBlogs 3 New ADF Insider Essential training videos published. ow.ly/1fz94q OracleBlogs OracleBlogs Weblogic Server 11gR1 PS2: Administration Essentials book and eBook t.co/ykzwIaqs OracleBlogs OracleBlogs Specialized Partners Only! New Service to Promote Your Events t.co/qTgyEpY4 wlscommunity WebLogic Community Oracle Weblogic Server 11gR1 PS2: Administration Essentials book and eBook andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Stress Testing Oracle ADF BC Applications – Intern… andrejusb.blogspot.com/2011/11/stress… OracleBlogs OracleBlogs Frank Nimphius presenting a full day of Oracle ADF in Switzerland ow.ly/1fxU78 java Java #JavaEE and #GlassFish: #JavaOne11 Slides, Demos, Replays, Hands-on Labs t.co/tLM0ehrD OracleBlogs OracleBlogs weblogic.security.SecurityInitializationException: Authentication for user weblogic denied ow.ly/1fxmiu glassfish GlassFish The Last Migration – GlassFish Wiki : t.co/Dc5FT1SJ OTNArchBeat OTNArchBeat A Successful Year of @MiddlewareMagic t.co/amcGGTTk OracleWebLogic Oracle WebLogic Unbeatable Performance for your Cloud Applications with Exalogic, #OracleCoherence and #WebLogic. ow.ly/7lYKm OTNArchBeat OTNArchBeat Stress Testing Oracle ADF BC Applications – Passivation and Activation | @AndrejusB bit.ly/sASssL OTNArchBeat OTNArchBeat Review: "Oracle Weblogic Server 11gR1 PS2: Administration Essentials" by Michel Schildmeijer | @MyFear t.co/ll6ra0J9 OTNArchBeat OTNArchBeat GlassFish 3.1.2 themes and features | The Aquarium bit.ly/vVqr9r Andre_van_Dalen Andre van Dalen Masterclass: Advanced Oracle ADF 11g lnkd.in/M_45Pi AdamBien Adam Bien The "lunch" edition of RentACar is pushed into: kenai.com/projects/javae… #wjax AdamBien Adam Bien In munich, room munich at #wjax. Welcome to #javaee workshop. Gather your questions. 15 minutes to go lucasjellema Lucas Jellema Review by Markus of Michel’s book: t.co/41U9wvOb In short: valuable for novice WLS users, maybe not so much for die-hard WLS admin. biemond Edwin Biemond “@myfear: [blog] #Review: "#Weblogic Server 11gR1 PS2: Administration Essentials" t.co/LsODcb3e” got the same conclusion on amazon glassfish GlassFish Practical advice for deploying Lift apps to GlassFish: bit.ly/t3KUml glassfish GlassFish The unbearable lightness of GlassFish t.co/v9307SEJ javafx4you javafx4you Building Java EE applications in JavaFX: JavaFX 2.0, FXML and Spring j.mp/tiMDUh andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Stress Testing Oracle ADF BC Applications – Passiv… andrejusb.blogspot.com/2011/11/stress… wlscommunity WebLogic Community “@AMIS_Services: Follow @amis_services To Win a copy of SOA Suite 11g Handbook by @lucasjellema dld.bz/axD22 pls RT” excellent book! glassfish GlassFish GlassFish 3.1.2 themes and features bit.ly/uEc6uZ biemond Edwin Biemond Weblogic pre-sales exam was hard, you really need to know the versions , upgrade path and have a score above 80% monkchips James Governor The Rise and Fall and Rise of Java. JAX 2011 london keynote. how big data and the web are floating the boat. slidesha.re/u3Kzlo glassfish GlassFish Tab Sweep – Jersey, Hudson, GlassFish Hosting, GC’s compared, Spring to JavaEE, Modularity, … bit.ly/u9Cc30 oracletechnet Justin Kestelyn Oracle Tuxedo: A renewed acquaintance t.co/gp0mmf20 OTNArchBeat OTNArchBeat Oracle Enterprise Pack for Eclipse, OEPE 11.1.1.8 bit.ly/tC3eKp OracleBlogs OracleBlogs NetBeans HTML Editor and Groovy Editor in a Multiview Component (Part 2) ow.ly/1ftCeI myfear Markus Eisele [blog] #Oracle 2008 – 2011 in Gartners Magic Quadrant for Enterprise Application Servers t.co/2Bs1vgMZ myfear Markus Eisele [blog] #EclipseCon Europe – Java 7 in the Enterprise goo.gl/fb/r80df #ece2011 #java7 javafx4you javafx4you JavaFX 2.0 for Mac build b07 (developer preview) is available for download j.mp/vSwmBP Enjoy! #JavaFX #Mac OracleBlogs OracleBlogs A deep dive in Oracle WebLogic! @ Contribute November 29th, 2011 Kontich Belgium ow.ly/1fsEZs arungupta Arun Gupta #JavaEE7 slides from #jaxlondon and #jfall11 now available: slidesha.re/sh4iFq AdamBien Adam Bien Just checked-in the results of the #jaxlondon community night (somehow beer related): kenai.com/projects/javae… glassfish GlassFish GlassFish Podcast Episode #080 – User Stories, Part 3: Adam Bien and Sean Comerford (ESPN) blogs.oracle.com/glassfishpodca… glassfish GlassFish Story: t.co/jQPqihJb using GlassFish blogs.oracle.com/stories/entry/… "3000+ requests/sec" and more enterprisejava Java EE Mentions New blog post WebLogic deployment status checks for CI wp.me/pOOSs-F #weblogic #continuousintegration /vi… bit.ly/uZz0fk The become a member in the WebLogic Partner Community please first login at http://partner.oracle.com and then visit: http://www.oracle.com/partners/goto/wls-emea Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress

Read the article

Craftsmanship is ALL that Matters

- by Wayne Molina

Today, I'm going to talk about a touchy subject: the notion of working in a company that doesn't use the prescribed "best practices" in its software development endeavours. Over the years I have, using a variety of pseudonyms, asked this question on popular programming forums. Although I always add in some minor variation of the story to avoid suspicion that it's the same person posting, the crux of the tale remains the same: A Programmer’s Tale A junior software developer has just started a new job at an average company, creating average line-of-business applications for internal use (the most typical scenario programmers find themselves in). This hypothetical newbie has spent a lot of time reading up on the "theory" of software development, devouring books, blogs and screencasts from well-known and respected software developers in the community in order to broaden his knowledge and "do what the pros do". He begins his new job, eager to apply what he's learned on a real-world project only to discover that his new teammates doesn't use any of those concepts and techniques. They hack their way through development, or in a best-case scenario use some homebrew, thrown-together semblance of a framework for their applications that follows not one of the best practices suggested by the “elite” in the software community - things like TDD (TDD as a "best practice" is the only subjective part of this post, but it's included here due to a very large following of respected developers who consider it one), the SOLID principles, well-known and venerable tools, even version control in a worst case and truly nightmarish scenario. Our protagonist is frustrated that he isn't doing things the "proper" way - a way he's spent personal time digesting and learning about and, more importantly, a way that some of the top developers in the industry advocate - and turns to a forum to ask the advice of his peers. Invariably the answer I, in the guise of the concerned newbie, will receive is that A) I don't know anything and should just shut my mouth and sling code the bad way like everybody else on the team, and B) These "best practices" are fade or a joke, and the only thing that matters is shipping software to your customers. I am here today to say that anyone who says this, or anything like it, is not only full of crap but indicative of exactly the type of “developer” that has helped to give our industry a bad name. Here is why: One Who Knows Nothing, Understands Nothing On one hand, you have the cognoscenti of the .NET development world. Guys like James Avery, Jeremy Miller, Ayende Rahien and Rob Conery; all well-respected and noted programmers that are pretty much our version of celebrities. These guys write blogs, books, and post videos outlining the "correct" way of writing software to make sure it not only works but is maintainable and extensible and a joy to work with. They tout the virtues of the SOLID principles, or of using TDD/BDD, or using a mature ORM like NHibernate, Subsonic or even Entity Framework. On the other hand, you have Joe Everyman, Lead Software Developer at Initrode Corporation - in our hypothetical story Joe is the junior developer's new boss. Joe's been with Initrode for 10 years, starting as the company’s very first programmer and over the years building up a little fiefdom of his own until at the present he’s in charge of all Initrode’s software development. Joe writes code the same way he always has, without bothering to learn much, if anything. He looked at NHibernate once and found it was "too hard", so he uses a primitive implementation of the TableDataGateway pattern as a wrapper around SqlClient.SqlConnection and SqlClient.SqlCommand instead of an actual ORM (or, in a better case scenario, has created his own ORM); the thought of using LINQ or Entity Framework or really anything other than his own hastily homebrew solution has never occurred to him. He doesn't understand TDD and considers “testing” to be using the .NET debugger to step through code, or simply loading up an app and entering some values to see if it works. He doesn't really understand SOLID, and he doesn't care to. He's worked as a programmer for years, and that's all that counts. Right? WRONG. Who would you rather trust? Someone with years of experience and who writes books, creates well-known software and is akin to a celebrity, or someone with no credibility outside their own minute environment who throws around their clout and company seniority as the "proof" of their ability? Joe Everyman may have years of experience at Initrode as a programmer, and says to do things "his way" but someone like Jeremy Miller or Ayende Rahien have years of experience at companies just like Initrode, THEY know ten times more than Joe Everyman knows or could ever hope to know, and THEY say to do things "this way". Here's another way of thinking about it: If you wanted to get into politics and needed advice on the best way to do it, would you rather listen to the mayor of Hicktown, USA or Barack Obama? One is a small-time nobody while the other is very well-known and, as such, would probably have much more accurate and beneficial advice. NOTE: The selection of Barack Obama as an example in no way, shape, or form suggests a political affiliation or political bent to this post or blog, and no political innuendo should be mistakenly read from it; the intent was merely to compare a small-time persona with a well-known persona in a non-software field. Feel free to replace the name "Barack Obama" with any well-known Congressman, Senator or US President of your choice. DIY Considered Harmful I will say right now that the homebrew development environment is the WORST one for an aspiring programmer, because it relies on nothing outside it's own little box - no useful skill outside of the small pond. If you are forced to use some half-baked, homebrew ORM created by your Director of Software, you are not learning anything valuable you can take with you in the future; now, if you plan to stay at Initrode for 10 years like Joe Everyman, this is fine and dandy. However if, like most of us, you want to advance your career outside a very narrow space you will do more harm than good by sticking it out in an environment where you, to be frank, know better than everybody else because you are aware of alternative and, in almost most cases, better tools for the job. A junior developer who understands why the SOLID principles are good to follow, or why TDD is beneficial, or who knows that it's better to use NHibernate/Subsonic/EF/LINQ/well-known ORM versus some in-house one knows better than a senior developer with 20 years experience who doesn't understand any of that, plain and simple. Anyone who disagrees is either a liar, or someone who, just like Joe Everyman, Lead Developer, relies on seniority and tenure rather than adapting their knowledge as things evolve. In many cases, the Joe Everymans of the world act this way out of fear - they cannot possibly fathom that a “junior” could know more than them; after all, they’ve spent 10 or more years in the same company, doing the same job, cranking out the same shoddy software. And here comes a newbie who hasn’t spent 10+ years doing the same things, with a fresh and often radical take on the craft, and Joe Everyman is afraid he might have to put some real effort into his career again instead of just pointing to his 10 years of service at Initrode as “proof” that he’s good, or that he might have to learn something new to improve; in most cases the problem is Joe Everyman, and by extension Initrode itself, has a mentality of just being “good enough”, and mediocrity is the rule of the day. A Thorn Bush is No Place for a Phoenix My advice is that if you work on a team where they don't use the best practices that some of the most famous developers in our field say is the "right" way to do things (and have legions of people who agree), and YOU are aware of these practices and can see why they work, then LEAVE the company. Find a company where they DO care about quality, and craftsmanship, otherwise you will never be happy. There is no point in "dumbing" yourself down to the level of your co-workers and slinging code without care to craftsmanship. In 95% of these situations there will be no point in bringing it to the attention of Joe Everyman because he won't listen; he might even get upset that someone is trying to "upstage" him and fire the newbie, and replace someone with loads of untapped potential with a drone that will just nod affirmatively and grind out the tasks assigned without question. Find a company that has people smart enough to listen to the "best and brightest", and be happy. Do not, I repeat, DO NOT waste away in a job working for ignorant people. At the end of the day software development IS a craft, and a level of craftsmanship is REQUIRED for any serious professional. When you have knowledgeable people with the credibility to back it up saying one thing, and small-time people who are, to put it bluntly, nobodies in the field saying and doing something totally different because they can't comprehend it, leave the nobodies to their own devices to fade into obscurity. Work for a company that uses REAL software engineering techniques and really cares about craftsmanship. The biggest issue affecting our career, and the reason software development has never been the respected, white-collar career it was meant to be, is because hacks and charlatans can pass themselves off as professional programmers without following a lick of good advice from programmers much better at the craft than they are. These modern day snake-oil salesmen entrench themselves in companies by hoodwinking non-technical businesspeople and customers with their shoddy wares, end up in senior/lead/executive positions, and push their lack of knowledge on everybody unfortunate enough to work with/for/under them, crushing any dissent or voices of reason and change under their tyrannical heel and leaving behind a trail of dismayed and, often, unemployed junior developers who were made examples of to keep up the facade and avoid the shadow of doubt being cast upon them. To sum this up another way: If you surround yourself with learned people, you will learn. Surround yourself with ignorant people who can't, as the saying goes, see the forest through the trees, and you'll learn nothing of any real value. There is more to software development than just writing code, and the end goal should not be just "shipping software", it should be shipping software that is extensible, maintainable, and above all else software whose creation has broadened your knowledge in some capacity, even if a minor one. An eager newbie who knows theory and thirsts for knowledge can easily be moulded and taught the advanced topics, but the same can't be said of someone who only cares about the finish line. This industry needs more people espousing the benefits of software craftsmanship and proper software engineering techniques, and less Joe Everymans who are unwilling to adapt or foster new ways of thinking. Conclusion - I Cast “Protection from Fire” I am fairly certain this post will spark some controversy and might even invite the flames. Please keep in mind these are opinions and nothing more. A little healthy rant and subsequent flamewar can be good for the soul once in a while. To paraphrase The Godfather: It helps to get rid of the bad blood.

Search Results

Search found 2217 results on 89 pages for 'pat james'.

Page 87/89 | < Previous Page | 83 84 85 86 87 88 89 | Next Page >

- by evolvd

- by user223833

- by achraf

- by Gitmo

- by Azooz Totti

- by apesa

- by Jeff Widmer

- by Rick Strahl

- by Back.Slash

- by George Clingerman

- by Jagged

- by lbjoum

- by Don

- by YumYumYum

- by HarveyP

- by YumYumYum

- by Ravi S Ghosh

- by Steve Tunstall

- by Sandro Dzneladze

- by Ravi S Ghosh

- by Jon Galloway

- by JuergenKress

- by Wayne Molina

< Previous Page | 83 84 85 86 87 88 89 | Next Page >