Search Results

Search found 5171 results on 207 pages for 'whatever'.

Page 87/207 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• How to disable a touchpad on an Acer Travelmate 6492?

  - by un pobrecito hablador

  I think it's broken because it starts working in the same way when i install their drivers in windows. It's an acer travelmate 6492. I want to disable it because i think that is broken, however i'm going to write what happens and if someone knows what could be wrong if it's not physically broken, can tell me how to solve it. Well, the main problem is that is scrolling all down every time so i can't do almost anything. I've tried to remove xserver-xorg-input-synaptics but it got worse and it was every time pressing enter or something like that so it was very annoying. Then when i could repair it, i tried with gpointing-device-settings and gsynaptics, but it continued doing the same even with i disabled it from there. The only thing that seems to have a positive effect is to use x(whatever) option instead of gnome when login in and disabling it with xinput. However, it only lasted some minutes before it started working and i had to disable it again. Any idea about how can i disable or fix it? Thanks in advance.

  Read the article

• MongoDB: Replicate data in documents vs. “join”

  - by JavierCane

  Disclaimer: This is a question derived from this one. What do you think about the following example of use case? I have a table containing orders. These orders has a lot of related information needed by my current queries (think about the products; the buyer information; the region, country and state of the sale point; and so on) In order to think with a de-normalized approach, I don't have to put identifiers of these related items in my main orders collection. Instead, I have to repeat all the information for each order (ie: I will repeat the buyer's name, surname, etc. for each of its orders). Assuming the previous premise, I'm committing to maintain all the data related to an order without a lot of updates (because if I modify the buyer's name, I'll have to iterate through all orders updating the ones made by the same buyer, and as MongoDB blocks at a document level on updates, I would be blocking the entire order at the update moment). I'll have to replicate all the products' related data? (ie: category, maker and optional attributes like color, size…) What if a new feature is requested and I've to make a lot of queries with the products "as the entry point of the query"? (ie: reports showing the products' sales performance grouping by region, country, or whatever) Is it fair enough to apply the $unwind operation to my orders original collection? (What about the performance?) I should have to do another collection with these queries in mind and replicate again all the products' information (and their orders)? Wouldn't be better to store a product_id in the original orders collection in order to be more tolerable to requirements change? (What about emulating JOINs?) The optimal approach would be a mixed solution with a RDBMS system like MySQL in order to retrieve the complete data? I mean: store products, users, and location identifiers in the orders collection and have queries in MySQL like getAllUsersDataByIds in which I would perform a SELECT * FROM users WHERE user_id IN ( :identifiers_retrieved_from_the_mongodb_query )

  Read the article

• Costs/profit of/when starting an indie company

  - by Jack

  In short, I want to start a game company. I do not have much coding experience (just basic understanding and ability to write basic programs), any graphics design experience, any audio mixing experience, or whatever else technical. However, I do have a lot of ideas, great analytical skills and a very logical approach to life. I do not have any friends who are even remotely technical (or creative in regards to games for that matter). So now that we've cleared that up, my question is this: how much, minimally, would it cost me to start such a company? I know that a game could be developed in under half a year, which means it would have to operate for half a year prior, and that's assuming that the people working on the first project do their jobs good, don't leave game breaking bugs, a bunch of minor bugs, etc.. So how much would it cost me, and what would be the likely profit in half a year? I'm looking at minimal costs here, as to do it, I would have to sell my current apartment and buy a new, smaller one, pay taxes, and likely move to US/CA/UK to be closer to technologically advanced people (and be able to speak the language of course). EDIT: I'm looking at a small project for starters, not a huge AAA title.

  Read the article

• hd0 out of disk error results to low graphics mode

  - by msPeachy

  Yesterday, I have reinstalled Ubuntu due to a error: hd0 out of disk on boot. Everything went fine, I've installed apps, perform updates and upgraded the kernel. I've even restarted it a few times just to check if I would encounter boot issues and was glad that everything was working perfectly, then powered it down. The next morning when I boot, I got this error: hd0 out of disk error. Press any key to continue... again! After pressing a key, it took 10 minutes for the Ubuntu logo to appear with it's 5 dots. After another 5 minutes, Ubuntu started checking the disk and displayed a message that / has errors, I pressed F to fix the errors. After which Ubuntu tells me that /tmp is not yet ready for mounting so I pressed S to skip mounting it, then Ubuntu restarted. On boot I saw the error: hd0 out of disk error. Press any key to continue... again. This time it took only a minute for the Ubuntu logo to appear and after another minute a dialog box appeared with the following message: The system is running in low-graphics mode. Your screen, graphics card, and input settings could not be detected correctly. You will have to configure these yourself. What would you like to do? Run in low-graphics mode for just one session Reconfigure graphics Troubleshoot the error Exit to console login Whichever option I choose I ended up with a console prompt: grub-editenv: error: cannot read the file /boot/grub/grubenv. _ I can't do anything on this console, whatever I type nothing happens. I've rebooted several times and I get same error every time. I don't quite understand what is wrong with Ubuntu or with my installation. I've encountered this hd0 out of disk error several times already and always ended up reinstalling. I'd really really appreciate it if you guys can help me fix this. Thank you and good day.

  Read the article

• Microsoft Changes Developer Account Registration Requirements

  - by Tim Murphy

  Over the last couple of weeks I have noticed that Microsoft seems to have changed the requirements for Corporate accounts.  These requirements were not in effect when I originally setup the account for the company that I work for.  We also recently had our corporate account canceled without explanation and are in the process of working to get it reinstated.  This all seems to revolve around rules to increase confidence that in the producers of content.  They are now having Symantec validate a company based on legal documents. In the past there have been problems with getting credit cards accepted.  We have had to setup new Live IDs to satisfy whatever glitch the system had or unexplainable requirement.  I am hoping that in the time that has elapsed these problems have been resolved. In truth I can’t say that these new requirements weren’t always in place, but it is getting frustrating to help clients setup accounts.  I am encourage that they have taken steps to safeguard the consumer from Joe-fly-by-night, but they also need to make sure that the process doesn’t become so complex that it drives away companies from participating in the store.  We will have to keep an eye on this as things evolve. del.icio.us Tags: Windows Phone Development,Windows 8 Development,Windows Phone,Windows 8,Registration,Corporate Accounts

  Read the article

• Floating point undesirable in highly critical code?

  - by Kirt Undercoffer

  Question 11 in the Software Quality section of "IEEE Computer Society Real-World Software Engineering Problems", Naveda, Seidman, lists fp computation as undesirable because "the accuracy of the computations cannot be guaranteed". This is in the context of computing acceleration for an emergency braking system for a high speed train. This thinking seems to be invoking possible errors in small differences between measurements of a moving object but small differences at slow speeds aren't a problem (or shouldn't be), small differences between two measurements at high speed are irrelevant - can there be a problem with small roundoff errors during deceleration for an emergency braking system? This problem has been observed with airplane braking systems resulting in hydroplaning but could this actually happen in the context of a high speed train? The concern about fp errors seems to not be well-founded in this context. Any insight? The fp is used for acceleration so perhaps the concern is inching over a speed limit? But fp should be just fine if they use a double in whatever implementation language. The actual problem in the text states: During the inspection of the code for the emergency braking system of a new high speed train (a highly critical, real-time application), the review team identifies several characteristics of the code. Which of these characteristics are generally viewed as undesirable? The code contains three recursive functions (well that one is obvious). The computation of acceleration uses floating point arithmetic. All other computations use integer arithmetic. The code contains one linked list that uses dynamic memory allocation (second obvious problem). All inputs are checked to determine that they are within expected bounds before they are used.

  Read the article

• What's wrong with circular references?

  - by dash-tom-bang

  I was involved in a programming discussion today where I made some statements that basically assumed axiomatically that circular references (between modules, classes, whatever) are generally bad. Once I got through with my pitch, my coworker asked, "what's wrong with circular references?" I've got strong feelings on this, but it's hard for me to verbalize concisely and concretely. Any explanation that I may come up with tends to rely on other items that I too consider axioms ("can't use in isolation, so can't test", "unknown/undefined behavior as state mutates in the participating objects", etc.), but I'd love to hear a concise reason for why circular references are bad that don't take the kinds of leaps of faith that my own brain does, having spent many hours over the years untangling them to understand, fix, and extend various bits of code. Edit: I am not asking about homogenous circular references, like those in a doubly-linked list or pointer-to-parent. This question is really asking about "larger scope" circular references, like libA calling libB which calls back to libA. Substitute 'module' for 'lib' if you like. Thanks for all of the answers so far!

  Read the article

• Getting file system free space

  - by Fred Riley

  This isn't a problem as such, more a request for information based on ignorance of the Linux filesystem. The very short question is: How do I find out how much free and used space there is on the volume from which Ubuntu is running? More detail: I'm running Ubuntu 12.04 from a 64Gb USB3 stick, created from booting up a year-old Ubuntu 12.04 DVD and running Startup Disk Creator. The reason for this is that the Master Boot Record on my hard disk, holding Windoze 7, has gone belly-up, and whilst awaiting a recovery disk I'm running Ubunto off USB or DVD as a 'trial'. (And will continue to run Ubuntu after restoring Windoze, as I've rediscovered my love of the penguin :o)) After installing Ubuntu on the stick I ran the software update app, which downloaded some 450Mb of updates and took a couple of hours to install to the stick. A couple of times I got a message saying that disk space was short. So I looked in the file manager (or whatever it's called these days) and couldn't see the stick listed, just: SYSTEM hard disk (listed as 479Gb Filesystem) two other partitions that had been created by Windoze "4.3GB Filesystem" which when I try to open gives the error "Could not find /cow", and when I try to unmount it tells me I can't because it's not mounted - D'OH!! Edit: screenshot of file manager Edit: screenshot of low disk space warning What I can't see is the USB stick from which I'm running Ubuntu. Where's it gone, anybody know? This is tangentially related to a previous question of mine about system tools, in that I'm trying to get control and knowledge of the system in the newest incarnation of Ubuntu.

  Read the article

• Should we encourage coding styles in favor of developer's autonomy, or discourage it in favor of consistency?

  - by Saeed Neamati

  A developer writes if/else blocks with one-line code statements like: if (condition) // Do this one-line code else // Do this one-line code Another uses curly braces for all of them: if (condition) { // Do this one-line code } else { // Do this one-line code } A developer first instantiates an object, then uses it: HelperClass helper = new HelperClass(); helper.DoSomething(); Another developer instantiates and uses the object in one line: new HelperClass().DoSomething(); A developer is more easy with arrays, and for loops: string[] ordinals = new string[] {'First', 'Second', 'Third'}; for (i = 0; i < ordinals.Length; i++) { // Do something } Another writes: List<string> ordinals = new List<string>() {'First', 'Second', 'Third'}; foreach (string ordinal in ordinals) { // Do something } I'm sure that you know what I'm talking about. I call it coding style (cause I don't know what it's called). But whatever we call it, is it good or bad? Does encouraging it have an effect of higher productivity of developers? Should we ask developers to try to write code the way we tell them, so to make the whole system become style-consistent?

  Read the article

• Models, collections...and then what? Processes?

  - by Dan

  I'm a LAMP-stack dev who's been more on the JavaScript side the last few years and really enjoying the Model + Collection approach to data entities that BackboneJS, etc. uses. It's helped me organize my code in such a way that it is extremely portable, keeping all my properties and methods in the scope (model, collection, etc.) in which they apply. One thing that keeps bugging me though is how to organize the next level up, the 'process layer' as you might call it, that can potentially operate on instances of either models or collections or whatever else. Where should methods like find() (which returns a collection) and create() (which returns a model) reside? I know some people would put a create() in the Collection prototype, but while a collection operates on models I don't think it's exactly right to create them. And while a find() would return a collection I don't think it correct to have that action within the collection prototype itself (it should be a layer up). Can anyone offer some examples of any patterns that employ some kind of OOP-friendly 'process' layer? I'm sorry if this is a fairly well-known discussion but I'm afraid I can't seem to find the terminology to search for.

  Read the article

• Unable to debug an encodded javascript?

  - by miles away

  I’m having some problems debugging an encoded javacscript. This script I’m referring to given in this link over here. The encoding here is simple and it works by shifting the unicodes values to whatever Codekey was use during encoding. The code that does the decoding is given here in plain English below:- <script language="javascript"> function dF(s){ var s1=unescape(s.substr(0,s.length-1)); var t=''; for(i=0;i<s1.length;i++)t+=String.fromCharCode(s1.charCodeAt(i)-s.substr(s.length-1,1)); document.write(unescape(t)); } </script> I’m interested in knowing or understanding the values (e.g s1,t). Like for example when the value of i=0 what values would the following attributes / method would hold s1.charCodeAt(i) and s.substr(s.length-1,1) The reason I’m doing this is to understand as to how a CodeKey function really works. I don’t see anything in the code above which tells it to decode on the basis of codekey value. The only thing I can point in the encoding text is the last character which is set to 1 , 2 ,3 or 4 depending upon the codekey selected during encoding process. One can verify using the link I have given above. However, to debug, I’m using firebug addon with the script running as localhost on my wamp server. I’m able to put a breakpoint on the js using firebug but I’m unable to retrieve any of the user defined parameters or functions I mentioned above. I want to know under this context what would be best way to debug this encoded js.

  Read the article

• Is this high coupling?

  - by Bono

  Question I'm currently working a on an assignment for school. The assignment is to create a puzzle/calculator program in which you learn how to work with different datastructures (such as Stacks). We have generate infix math strings suchs as "1 + 2 * 3 - 4" and then turn them in to postfix math strings such as "1 2 + 3 * 4 -". In my book the author creates a special class for converting the infix notation to postfix. I was planning on using this but whilst I was about to implement it I was wondering if the following is what you would call "high coupling". I have read something about this (nothing that is taught in the book or anything) and was wondering about the aspect (since I still have to grasp it). Problem I have created a PuzzleGenerator class which generates the infix notation of the puzzle (or math string, whatever you want to call it) when it's instantiated. I was going to make a method getAnswer() in which I would instantiate the InToPost class (the class from the book) to convert the infix to postfox notation and then calculate the answer. But whilst doing this I thought: "Is using the InToPost class inside this method a form a high coupling, and would it be better to place this in a different method?" (such as a "convertPostfixToInfix" method, inside the PuzzleGenerator class) Thanks in advance.

  Read the article

• Cheap ways to do scaling ops in shader?

  - by Nick Wiggill

  I've got an extensive world terrain that uses vec3 for the vertex position attribute. That's good, because the terrain has endless gradations due to the use of floating point. But I'm thinking about how to reduce the amount of data uploaded to the GPU. For my terrain, which uses discrete / grid-based vertex positions in x and z, it's pretty clear that I can replace my vec3s (floats, really) with shorts, halving the per-vertex position attribute cost from 12 bytes each to 6 bytes. Considering I've got little enough other vertex data, and an enormous amount of terrain data to push into the world, it's a major gain. Currently in my code, one unit in GLSL shaders is equal to 1m in the world. I like that scale. If I move over to using shorts, though, I won't be able to use the same scale, as I would then have a very blocky world where every step in height is an entire metre. So I see these potential solutions to scale the positional data correctly once it arrives at the vertex shader stage: Use 10:1 scaling, i.e. 1 short unit = 1 decimetre in CPU-side code. Do a division by 10 in the vertex shader to scale incoming decimetre values back to metres. Arbirary (non-PoT) divisions tend to be slow, however. Use (some-power-of-two):1 scaling (eg. 8:1), which enables the use of a bitshift (eg. val >> 3) to do the division... not sure how performant this is in shaders, though. Not as intuitive to read values, but possibly quite a bit faster than div by a non-PoT value. Use a texture as lookup table. I've heard that this is really fast. Or whatever solutions others can offer to achieve the same results -- minimal vertex data with sensible scaling.

  Read the article

• Transitioning from Internal to Public Speaking

  - by TJB

  For whatever reason, I've always enjoyed giving presentations. As a developer, I've grown from giving the rare presentation when asked to frequently doing 'brown bag' talks and other presentations on new technology, projects etc. I'd like to expand as a presenter and start giving talks in public, outside of just my workplace, and I'm looking for tips on how to get there. At a high level, I'd love to know a good path to take & useful tips to help me grow from just giving internal talks to my group (10-20 people) to eventually be a presenter at medium-large sized conferences. Here are some specific questions, but I will take any advice you can offer: 1. How much experience do I need to speak at user groups etc? I've been in industry for around 5 years, which pales in comparison to most speakers that I normally see. 2. What is a good venue for my 1st public talk? 3. What surprises can I expect when transistioning from speaking to a small group of friends to presenting in public to strangers? I live in southern California and my background is mostly .net / web, so if you have any specific user group / venues those are also greatly appreciated.

  Read the article

• Dedicated Servers: Is one better then two for LAMP pseudo HA setup? [closed]

  - by bikedorkseattle

  Possible Duplicate: How to find web hosting that meets my requirements? I know there are zillions of commentary about hosting out there, but I haven't read much about this. Our current well known host is having too many problems, the hardware we are on it subpar, and I'm ready to leave. A day of downtime can cost as much as our monthly hosting bill. A month of bad performance is just killing us right now, user and google wise. I'm wondering about running two dedicated boxes for LAMP, one running as the primary Nginx/Apache (proxy pass), and the other as the MySQL box. Running a single box scares the bejesus out of me because who knows how long it will take anyone to fix a raid card or whatever. The idea is to set this up using some sort of failover system using pacemaker and heartbeat. If one server goes down the other can take over for the other running both web and db. There are some good articles over at Linode about this. I have a few DBs that are 1GB+ and would like to load them into memory. Because of this, I'm shying away from a Linode HA setup because for the price I could do it with two dedicated like I described. Am I mad or an idiot? What are people out there doing for pseodu high availability good performance setups under $400/month? I'm a webmaster; I do a lot of things none of it that well :)

  Read the article

• Rewrite img and link paths with htaccess and serve the file from rewritten path?

  - by frequent

  I have a static mockup page, which I want to "customize" by switching a variable used in image-src and link-href attributes. Paths will look like this: <img src="/some/where/VARIABLE/img/1.jpg" alt="" /> <link rel="some" href="/some/where/VARIABLE/stuff/foo.bar" /> I'm setting a cookie with the VARIABLE value on the preceding page and now want to modfiy the paths accordingly by replacing VARIABLE with the cookie value. I'm a htaccess newbie. This is what I have (doesn't work): <IfModule mod_rewrite.c> # get cookie value cookie RewriteCond %{HTTP_COOKIE} client=([^;]*) # rewrite/redirect to correct file RewriteRule ^/VARIABLE/(.+)$ /%1/$1 [L] </IfModule> So I thought my first line gets the cookie value and stores this in %1. And on the second line I'm filtering VARIABLE, replace it with the cookie value and whatever comes after VARIABLE in $1. Thanks for sheeding some light on what I'm doing, doing wrong and if I can do this at all using htaccess. EDIT: I'm sort of halfway through, but it's still not working... Mabye someone can apply the finishing touches: <IfModule mod_rewrite.c> # check for client cookie RewriteCond %{HTTP_COOKIE} (?:^|;\s*)client=([^;]*) # check if an image was requested RewriteCond %{REQUEST_FILENAME} \.(jpe?g|gif|bmp|png)$ # exclude these folders RewriteCond %{REQUEST_URI} !some/members/logos # grab everything before the variable folder and everything afterwards # replace this with first bracket/cookie_value/second bracket RewriteRule (^.+)/VARIABLE/(.+)$ $1/%1/$2 [L] </IfModule> Still can't get it to work, but I think this is the correct way of doing it. Thanks for help!

  Read the article

• how get collision callback of two specific objects using bullet physics?

  - by sebap123

  I have got problem implementing collision callback into my project. I would like to have detection between two specific objects. I have got normall collision but I want one object to stop or change color or whatever when colides with another. I wrote code from bullet wiki: int numManifolds = dynamicsWorld->getDispatcher()->getNumManifolds(); for (int i=0;i<numManifolds;i++) { btPersistentManifold* contactManifold = dynamicsWorld->getDispatcher()->getManifoldByIndexInternal(i); btCollisionObject* obA = static_cast<btCollisionObject*>(contactManifold->getBody0()); btCollisionObject* obB = static_cast<btCollisionObject*>(contactManifold->getBody1()); int numContacts = contactManifold->getNumContacts(); for (int j=0;j<numContacts;j++) { btManifoldPoint& pt = contactManifold->getContactPoint(j); if (pt.getDistance()<0.f) { const btVector3& ptA = pt.getPositionWorldOnA(); const btVector3& ptB = pt.getPositionWorldOnB(); const btVector3& normalOnB = pt.m_normalWorldOnB; bool x = (ContactProcessedCallback)(pt,fallRigidBody,earthRigidBody); if(x) printf("collision\n"); } } } where fallRigidBody is a dynamic body - a sphere and earthRigiBody is static body - StaticPlaneShape and sphere isn't touching earthRigidBody all the time. I have got also other objects that are colliding with sphere and it works fine. But the program detects collision all the time. It doesn't matter if the objects are or aren't colliding. I have also added after declarations of rigid body: earthRigidBody->setCollisionFlags(earthRigidBody->getCollisionFlags() | btCollisionObject::CF_CUSTOM_MATERIAL_CALLBACK); fallRigidBody->setCollisionFlags(fallRigidBody->getCollisionFlags() | btCollisionObject::CF_CUSTOM_MATERIAL_CALLBACK); So can someone tell me what I am doing wrong? Maybe it is something simple?

  Read the article

• What is the best way to store meshes or 3d models in a class

  - by Robse

  I am wondering, how I should store my mesh into memory after loading it from whatever file. I have Questions floating in my head: Should a mesh could have sub meshes or does the 3d model just store a list of meshes all on the same level Is there one material assigned to one mesh 1:1? What do I have to consider, if I want to store skeletal animations? Btw it's a OpenGL|ES2 iOS game using GLKit. I came up with some basic struct types: (But I think they are way to simple and I need to add padding or change the vector3 to vector4.) typedef union _N3DShortVector2 { struct { short x, y; }; struct { short s, t; }; short v[2]; } N3DShortVector2; typedef union _N3DShortVector3 { struct { short x, y, z; }; struct { short r, g, b; }; struct { short s, t, p; }; short v[3]; } N3DShortVector3; typedef GLKVector3 N3DFloatVector3; typedef struct _N3DMeshRecordSV3 { N3DShortVector3 v1, v2, v3; } N3DMeshRecordSV3; typedef struct _N3DMeshRecordSV3FN3ST2 { N3DShortVector3 v1, v2, v3; N3DFloatVector3 n1, n2, n3; N3DShortVector2 t1, t2, t3; } N3DMeshRecordSV3FN3ST2;

  Read the article

• SIMPLEST way to set up password protection for a static site, with basic admin UI?

  - by Joseph Turian

  I have a static site. I would like the simplest approach to password protecting a directory, with a basic admin UI for adding/removing users. I will have so few users that I don't care about performance. I don't care if it's PHP or Django or whatever, I just want a complete software package. Apache basic auth isn't good, because you can't log out. Nor is there a UI for adding users. I tried throwing everything behind Django auth and serving the files through Django. However, Chrome treats all my text/css headers as text/plain, so I don't get any stylesheets showing. I can't use mod_xsendfile on my server because I can't reconfigure Apache to add new modules. I think this approach is overkill anyway. I can try configuring Nginx's X-Accel-Redirect, however that requires implementing all the Django code for auth myself, and I'd prefer an existing solution. However, this is my backup plan. Is there a code package that implements authentication with basic admin for a static site?

  Read the article

• Is there a massive other side to software development which I've somehow missed, revolving entirely around Microsoft?

  - by Aerovistae

  I'm still a beginning programmer; I've been at it for 2 years. I've learned to work with a few languages, a bit of web development technologies, a handful of libraries, frameworks, and IDEs. But over the past two years (and long before I even started, really), I keep hearing references to these...things. A million of them. Things such as C#, ADO, SOAP, ASP, ASP.NET, the .NET framework, CLR, F#, etc etc. And I've read their Wikipedia articles, in-depth, multiple times, and they all mention a million other things on that list, but I just can't seem to grasp what it all is. The only thing I've taken away with any certainty is that Microsoft is behind all of it. It sounds almost like a conspiracy. Are all these technologies just for developing on the Windows platform? What is .NET? Do some software developers dedicate their entire career just to that side of things? Why would I want to get into it, and what advantage does...whatever it is...have over all the other technologies there are? I hope this makes sense. It's a broad question, but inside it there's a very specific question asking about something I don't know the name of. Hopefully you can grasp my confusion.

  Read the article

• How can one-handed work in Ubuntu be eased?

  - by N.N.

  My right hand is temporarily immobilized and I would like to do some minor general work on my computer. Mostly web browsing, mailing and file and directory browsing and editing. For this I currently use Firefox, Thunderbird, Nautilus and the GNOME terminal (I have already asked a specific question about Emacs). Are there ways to ease such, or any other general, one-handed work in Ubuntu? I have found http://stackoverflow.com/questions/2391805/how-can-i-remain-productive-with-one-hand-completely-immobilized but that is not exactly what I am asking for. I want to ease whatever little time spent one-handed in Ubuntu and this is also interesting for situations where there is no injury involved, such as when one hand is occupied. I do realize I should avoid unnecessary strain. The main thing that is much slower one-handed is writing. Since I am only temporarily immobilized it seems to make no sense learn a new keyboard layout. I would be surprised if I managed to learn and become more effective with a new keyboard layout (than one-handed QWERTY) before I can use my other hand again. What I have already found: Sticky keys for making it easier to enter keyboard commands. When writing one-handed there are more cases of where it is useful to paste in phrases rather than to reenter them. It is easier to use Super+S rather than CtrlAlt+arrow keys to switch work space.

  Read the article

• How to create a bootable system with a squashfs root

  - by cldfzn

  My goal is to be able to take a customized root file system loaded with the software I want. So far I've created a squashed filesystem using debootstrap and chroot to install the software I want on the system. The problem I am now running in to.. whenever I boot in to the system, my user accounts that were set up in the chroot do not work. First boot everything works out, second boot I can't log in. That is baffling to me. Any one know a reason or a place to start looking? Update To get a working system with a squashfs filesystem: sudo apt-get install live-boot live-boot-initramfs-tools extlinux sudo update-initramfs -u Create a squashfs file from a bootstrapped or running ubuntu filesystem with whatever packages you want available. https://help.ubuntu.com/community/LiveCDCustomizationFromScratch provides good instructions for creating a debootstrapped system to build on. Format the target drive with ext2/3/4 and enable the bootable flag. Create the folder layout on the target drive and install extlinux: mkdir -p ${TARGET}/boot/extlinux ${TARGET}/live extlinux -i ${TARGET}/boot/extlinux dd if=/usr/lib/syslinux/mbr.bin of=/dev/sdX #X is the drive letter cp /boot/vmlinuz-$(uname -r) ${TARGET}/boot/vmlinuz cp /boot/initrd.img-$(uname -r) ${TARGET}/boot/initrd cp filesystem.squashfs ${TARGET}/live Create ${TARGET}/boot/extlinux/extlinux.conf with the following contents: DEFAULT Live LABEL Live KERNEL /boot/vmlinuz APPEND initrd=/boot/initrd boot=live toram=filesystem.squashfs TIMEOUT 10 PROMPT 0 Now you should be able to boot from the target drive in to your squashed system.

  Read the article

• Is there any way to facilitate switching windows in Ubuntu?

  - by Ivan

  I'm just a student who received my laptop from my uncle, who's a coder, so I'm still getting used to working with ubuntu. I recently upgraded ubuntu from an earlier version, and everything seems to be pretty great. The only thing is that when I open a program, or file, or whatever, it takes up the whole screen. I can only close it by going to the far top left of my screen, or by ctrl+W. Anyways, I find it really hard to switch between programs. For example I really like to have my windows that are open to be accessible by clicking on their icon at the bottom of the screen... Great when writing or researching. Anyways, I really just want to find an easier way to switch windows. Also, I used to love the way I could cube-rotate my screen, and just drag files from one desktop to another, with compiz. Now, its sort of like flipping a coin when I switch windows, is there any way to get my desktop cube back? And yes, I have enabled all the old settings I used to use with compiz. Sorry if what I'm asking is very basic, I know how to use a computer, I'm just not really familiar with the interface! Any help is greatly appreciated.

  Read the article

• Booting Ubuntu 12.04 from external eSATA disk

  - by Lord of Scripts

  This is my system topology: Disk #1 (SATA Internal) C: D: (Windows 7 Ultimate) Disk #2 (SATA Internal) E: (Windows Backup) Disk #3 (eSATA External) H: I: (Other windows data) /dev/sdc3 Linux Swap /dev/sdc4 Extended partition /dev/sdc5 Linux / So, I originally had there Ubuntu 8.1 from years ago but never got to use it. Now I used the Ubuntu 12.04 Live CD to install on that same location (That live CD takes a century to boot on a 6GB Intel i7 system...). The installation went fine, I selected it to install on /dev/sdc5 but it never asked me for any boot stuff, where I wanted to install Grub or whatever it is that it uses nowaways (I come from the LILO days when it always worked :-) So, yet again I can't access my new Linux installation. I have to wait a century to boot the "Live" CD and it allows me to see my new installation but I can't do anything with it. I tried the approach of this blog post. Copied the linux.bin of /dev/sdc5 into C: and used the BCDEdit steps to declare the new OS. So when I boot I see the Windows Boot menu and select Linux and after than I only get a black screen with a blinking cursor on the upper left. I can boot into Windows though. So, perhaps it didn't install the boot code on /dev/sdc5? I used this setup years ago booting from Windows with a BIN file: dd if=/dev/sdc5 of=/mnt/share/C/linux.bin bs=512 count=1 I am very reluctant to run GRUB because years ago I did and it wiped out my Windows boot sector and took quite some effort to recover it and be able to boot Windows again. I have been trying to install GRUB on a blank USB stick but I can't find anything clear enough. My system does NOT have a floppy. So can someone give me some ideas about how to get control of my Ubuntu 12.04 installation?

  Read the article

• Capturing BizTalk 2004 SQLAdapter failures

  - by DanBedassa

  I was recently working on a BizTalk 2004 project where I encountered an issue with capturing exceptions (inside my orchestration) occurring from an external source. Like database server down, non-existing stored procedure, …   I thought I might write-up this in case it might help someone …   To reproduce an issue, I just rename the database to something different.   The orchestration was failing at the point where I make a SQL request via a Response-Request Port. The exception handlers were bypassed but I can see a warning in the event log saying: "The adapter failed to transmit message going to send port "   After scratching my head for a while (as a newbie to BTS 2004) to find a way to catch the exceptions from the SQLAdapter in an orchestration, here is the solution I had.   ·         Put the Send and Receive shapes inside a Scope shape ·         Set the Scope’s transaction type to “Long Running” ·         Add a Catch block expecting type “System.Exception” ·         Set the “Delivery Notification” of the associated Port to “Transmitted” ·         Change the “Retry Count” of the associated port to 0 (This will make sure BizTalk will raise the exception, instead of a warning, and you can capture that) ·         Now capture and do whatever with the exception inside the Catch block

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >