Search Results

Search found 58734 results on 2350 pages for 'windows batch'.

Page 873/2350 | < Previous Page | 869 870 871 872 873 874 875 876 877 878 879 880  | Next Page >

• what causes drops in apache throughput?

  - by Robbie Mckennie

  i was poking around in the windows task manager, and i found this cool network throughput graphing thing. so i wanted to see it max out, so i started downloading a 1.8gb image (from the localhost to a remote system). but, much to my surprise, it looked like this: i count 16 dips, so i divided the 1.8gb into 16 and i got 115mb. then i looked up the mtu of ip, and i knew the mtu of ethernet from my reading, both far smaller than 115mb. and since tcp is connection orientated, it doesn't have an mtu.

  Read the article

• Create manual IPSec policy on Window (like spdadd and add on Linux)

  - by hapalibashi

  Hello On Linux it is possible to create an a manual IPSec (no IKE etc) tunnel thus: spdadd 192.168.0.10/32[5066] 192.168.0.11/32[5064] udp -P in ipsec esp/transport//require; add 192.168.0.10 192.168.0.11 esp 2222 -m transport -E des-ede3-cbc "123456789012123456789012" -A hmac-md5 "1234567890123456"; I need to do the same on Windows. I am aware of netsh but I don't think its equivalent, I need to specific the SPI (thats the 2222 above) and this seems impossible. Any ideas or alternatives?! Thanks, Stuart.

  Read the article

• Error installing Network driver

  - by Simon Carpentier

  I'm tring to install NetLimiter 3 (3.0.0.10, x64) on my Windows 7 x64 machine. At the driver installation step, I'm getting an error: Error 0x8004a029: Couldn't install the network component. (InstallNdisIMDriver) UPDATE 2010-09-20: I received a response to my support request: Hi Simon, It seems that problem is rather on your system than in NL3. Too many networking applications (VPN, Virtual computers) are installed on your machine and they are preventing NL3 from proper installation. In order to install NetLimiter 3, try to disable/temporarily remove these apps. Several users had the same problem and shuffling with adapter and networking software helped them. Please, let us know which action helps you (if any). Sincerely, Jan Bilek Any thoughts on this?

  Read the article

• How to create an "hybrid" usb stick?

  - by rdesign

  Hey guys, I was wondering how to make an hybrid usb stick. That means a usb stick that runs under mac and windows and displays specific content. Example: Plug in on win : index.html opens. Mac os X files are invisible. Plug in on mac: indexMac.html opens. Win files are invisible. I know that every usb stick can be read by both platforms. The Apple Mac os X CD is something which inspired me. thanks a lot.

  Read the article

• Shared SQL Server 2008

  - by nazaf

  Hi, I have a Windows Hyper VPS plan with 1024 MB of RAM. After installing SQL Server 2008 Express, my memory usage went up to 75% without running my site yet. I know that SQL Server consumes a lot of memory, so I decided to host my DB on a shared server. Which of the following is more scalable: install my DB on my VPS, or on a shared server ? If the latter, then can you recommend me a good shared server? Thanks.

  Read the article

• Not able to access other machines on network

  - by TheVillageIdiot

  Hi I'm running Windows 7 Enterprise (32bit) on my laptop. For some time I'm not able to access other machines using \\192.168.xxx.xxx. I've installed VM Ware player on my machine few days back but I don't remember if it happened just after that or there is some other reason behind it. EDIT:- I've disabled VMWare Bridge Protocol but still no effect. Please help me. PS:- I've used both wireless and wired networks. Network sharing is enabled and I can ping other machines but cannot access network shares. I get following message: \\xxx.xxx.xxx.xxx You might not have permission to use this network resource. Contact the administrator of this server to find out if you have acess permissions. The request is not supported. EDIT (2):- Network Discovery, File and Printer Sharing, Folder sharing are all on.

  Read the article

• How to execute everything in the Local Area Network

  - by matnagel

  We have a very small LAN here, but some peolpe here think we need Active Directory, though nobody knows how to maintain it. I am not in the position to change this. How can I get full access (on Linux it would be "execute" rights) also for files on network drives (the files are just on another machine next room) My account is in the group Administrators on a windows 2003 server Domain Controller. I cannot open simple MS Access 2000 Databases or CHM Files from network drives in the lan How to do that? Some policy setting? I want to change that once. It is useless. We have no distinction between local or network files here. I would have to copy everything to a local drive and then do what I want.

  Read the article

• Scan And Fix a RAW drive

  - by Claus Jørgensen

  Hi Basically I got the same problem as described in this thread. When I plug my HTC Hero Android Phone with USB into my Windows 7 computer I get a "Do you want to Scan and Fix" message. However, if I click "Scan and Fix", the USB instantly unplug itself, so that's no good. I've tried updating drivers from HTC with no luck. I've also tried running chkdisk from command-line with the message that it can't be used in RAW drives. This is really really annoying, and the SD card works just fine if I ignore the message, so I just want a way to disable/hide this message permanently. If anyone have some ideas how this can be done, please let me know. Thanks.

  Read the article

• Software to automatically download a file from FTP and then rename->replace existing file

  - by pauska

  Hi. We pay a news agency to provide us mp3's of hourly news bulletins. They put the mp3's on a FTP server just about 10 minutes before every hour, with files named after date and time (example: 02012010_1600.mp3 or similar). I need to find some solution to download only the latest modified file from the FTP server, rename it to news.mp3 and replace the previous news.mp3 that was created. This should prefferably run on a Windows 2008 Server, as a service if its possible. Anyone have suggestion for software?

  Read the article

• External hard drive doesn't appear in Computer

  - by Thomas Clayson

  I cannot work out why this is happening. I have an external hard drive (which is an old laptop hard drive with an IDE to USB adapter). Plugging it into my computer powers it up. It spins correctly and the lights on the adapter flash normally. Uninstalling from hardware manager and plugging it back in causes Windows to "install new software", and it says it has installed properly. In Disk Management it comes up in the bottom part as Disk 2 with the right size (~60 GB), but not in the top half. There are three empty drives in the top half. They don't have titles or drive letters. Right clicking them bring up slightly varying context menus, but all with the options disabled. Here is a picture of my Disk Management screen: How do I make this drive show up in My Computer? I need to format it and use it as an external hard drive.

  Read the article

• Gvim displays wrong font when set from _gvimrc, but correct font when set from menus

  - by dggoldst

  This question applies to gVim running on Windows. I have the following line in my _gvimrc set guifont=Lucida_Sans_Typewriter:h11:cANSI When gVim starts up, it strange italicizes everything! A call to :set guifont shows that things seem to have been set correctly, as it returns guifont=Lucida_Sans_Typewriter:h11:cANSI Then I manually select Edit-Select Font ... and then choose Lucida Sans Typewriter, and font size 11 and submit, the italics disappear and it looks fine. I've posted my _gvimrc for reference at http://vim.pastey.net/132157 So my questions are: Why am I getting different results from setting it manually and from _gvimrc? Is there a way to capture the command that the dialog box is sending back to the program? It might include extra commands that I'm missing.

  Read the article

• Best way to duplicate databases nightly?

  - by Margaret

  Hey all We just got two new servers, that are running Windows Server 2008. The intent is to make the machines pretty much identical, copying the content of the master to the slave on a nightly basis, so that if anything fails, the second copy can stand in immediately. It doesn't need to be up-to-the-minute mirroring, though I suppose that wouldn't hurt if performance is not affected. The two machines will, amongst other things, each be running an instance of SQL Server 2008. The aim is to duplicate the databases on the master down to the slave on a nightly basis. Unless I'm misunderstanding, the slave databases in mirrored databases require the primary to be present to work correctly; I'm hoping for some solution where we have a second machine that can be up and running with minimal downtime if the first one falls over. Am I misunderstanding mirroring? Is that the best way to do things, or should I use some other mechanism? If so, what?

  Read the article

• Need Recommendations: Network Software and Hardware Setup for small firm

  - by Rogue

  Will be starting a small graphics design firm soon, with 20 employees. Therefore need software to manage the network. Have bought a bulk license of Windows 7. I have a spare computer which can act as a server if necessary, but its an ancient Dell machine (Pentium-III). If required I would purchase an extra machine, but would like to avoid unnecessary costs at start up. Following are the main functions that I would like to perform: Need to monitor\control network traffic and internet usage, restrict access to certain websites Alerts when access to certain software's, and when trying to tamper with privileges Ability to view desktops of any computer at any given time Limit access to certain hardware like USB ports,etc Limit access to folders on the computer Log/Report of all actions including keystrokes performed on any computer Local Network chat and talk client Collaboration and Work logs Any Software available to do all of the above and also any additional hardware required besides network switches, network card's and CAT5e cables. Any other recommendations besides the above mentioned hardware setup

  Read the article

• How can I get past a BSOD 07b when booting from a VHD?

  - by Dan

  I thought I'd be clever and use disk2vhd at the end of my contract to backup my machine so I could easily restore it when I started my new contract, no matter what the buffoons had done with it in the meantime. I didn't count on them losing it. I'm trying to boot this new machine from the VHD. I get the windows logo and then a 07B bluescreen error, something to do with the disk, and it won't boot even in safe mode. The cure apparently is to run sysprep but I can't run that unless I can boot into the VHD so... I can mount the disk, is there a way to modify it

  Read the article

• I got this message from my host "Exceeded allocated monthly traffic" want to understand problems tha

  - by Amr ElGarhy

  I have a dedicated windows 2008 server and with Allocated monthly traffic: 1500GB, the hosting company sent me "Please take note that the allocated traffic included with your Budget (calculated by GB of traffic) has been exceeded. You will be billed for the exceeding traffic at the end of the month according to the per GB exceeding traffic fee specified on your contract." I checked my Google analytics account and didn't find any big different for the websites traffic this month than previous months. I just want to understand what may cause this sudden increase in traffic this month? may be ftp access? remoting to webserver too much time? or what may cause this? Also, is there any tool in the server to know where the traffic went?

  Read the article

• How can I permanently remove default root hints from a Server 2008 DNS server?

  - by TonyD

  My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

  Read the article

• Change the order of DNS lookup when connected in the VPN

  - by qwerty2010

  Hi, Using Windows 7 Pro here. I have my LAN network adapter with DNS server 8.8.8.8 (Google's DNS). I also have OpenVPN client to connect to my company's network. If I type "nslookup" while disconnected from the VPN, I get 8.8.8.8 (from my LAN network adapter). If I type "nslookup" while connected in the VPN, I get the DNS IP from my company's network. That makes me think that when connected to the VPN all DNS's resolution are routed first to my company's DNS. How can I change this order, and make the DNS resolution be routed to 8.8.8.8 first, when I'm connected to the VPN? Thank you

  Read the article

• What to do if I can't ping my DNS?

  - by Moshe Lewin

  On my Windows XP SP3 machine I can only browse (with any browser) by putting in an ip address. If I put in any domain name it doesn't work. Skype and IM work. In command prompt nslookup works to resolve the name to an ip address, but ping does not work using a domain name, only using the ip address. Other computers on the same network can surf the net normally without any problems. I am not using a proxy. I already reset winsock and tcpip stack to no avail. Can anyone help me solve the problem?

  Read the article

• Multiple PXE server same subnet

  - by Termiux

  I've been struggling with this for some time. I have a few test machines that boot from the network, they receive the boot data from the DHCP server, this tells them who is the boot server where is the file they'll boot etc. However, I need to add a second PXE server in the same subnet (create another Vlan is not an option right now). I read somewhere that I may be able to send certain parameters to certain machines based on their MAC address (this way choosing what computers boot from what server) however I cannot find how to do this, anyone knows how? this will be my solution but I cannot find the answer. My DHCP is a windows server 2003 I have 2 servers running custom flavors of Linux server as TFTP servers. Some machines use data to boot from server 1, and the others must bu able to boot from server 2. Thx

  Read the article

• How to get monitor resolution of 1680x1050 using ATI Radeon HD 2600 PRO in a dual monitor setup

  - by pratikk

  I have Sapphire ATI Radeon HD 2600 PRO graphics card in my Windows Server 2008 x64 machine. It has two outputs a VGA and a DVI. I have connected the DVI to my Dell 24" monitor with 1900x1200 resolution and it works 100%. The VGA I have connected to my second monitor a Samsung 22" with native resolution of 1680x1050. But the ATI driver and Catalyst control centre doesn't show this resolution as an option. If I choose a lower resolution like 1280x1024 it looks really bad and fuzzy. I searched in google and downloaded the powerstrip tool that allowed me to create a custom resolution of 1680x1050 and then this option shows up in Catalyst control centre and my 2nd monitor works fine now. But I don't want to pay for an application to choose a display resolution. Why doesn't ATI show me that option by default even though it has no problem in actually supporting the display at resolution. Is there a way to get 1680x1050 resolution using ATI drivers only ?

  Read the article

• Hyper-V virtual machine unable to get IP address from DHCP server running on same physical box

  - by Bronumski

  We have a Windows server 2008 R2 with two network cards running AD, DHCP, DNS and Hyper-V The first nic is setup with a static IP address and DHCP, WDS, and DNS are bound to it. The second nic is configured in Hyper-V to be only used by Hyper-V and has been automatically configured so that only the virtual switch is enabled on the adapter. DHCP and DNS work fine for all physical machines on the network. It also works for Virtual Machines running on another physical box. Virtual machines that are bound to the virtual switch network adapter are unable to get a IP address. If the virtual machine is given a static IP address with correct subnet, gateway and dns everything works. Has anyone else got this working?

  Read the article

• Administrator File Modification Privilege

  - by Leigh Riffel

  Windows Server 2008 apparently allows an application to somehow configure the folder so that any changes made within the folder require administrator level access. I login with an account that has administrator privileges, but is not the local administrator account. When I do so I find that I can't save changes to files opened within this folder. I know I can open the application as administrator or move the file out of the folder, make the change, then move it back in, but I'm hoping there is a better way short of disabling the protection entirely. Is there a way perhaps to remove it for the files I frequently edit?

  Read the article

• Windows7 x64 clipboard failure

  - by Konoplianko

  Hi. I'm using windows 7 x64 and i need to work with citrix client. Unfortunately my clipboard stops working after 5-10 minutes with citrix apps. I can't copy/paste anything. But on citrix clipboard is still working. Problem disappears after rebooting computer. But it's takes too much time. Is there any way to restart clipboard process or fix this problem without rebooting ? Thanks ! UPD.1 Copy/Paste is broken only on my local computer. It means that when I'm pressing ctrl+c (also when doing the same with mouse) ctrl+v pastes nothing (in GUI menu it's highlighted with gray - disabled). Occasionally it repairs itself when I'm starting rebooting: nsd.exe crashes with some exception, reboot stops and then it works again. But I'm still not sure that problem is in nsd.exe (Lotus notes)

  Read the article

• Running rebaseall on Cygwin

  - by Erik Vold

  I tried building node.js on cygwin and that caused errors, so someone in #node.js on freenode told me to run rebaseall on cygwin to clean it up. So I tried that and I got the following message: $ rebaseall rebaseall: only ash or dash processes are allowed during rebasing Exit all Cygwin processes and stop all Cygwin services. Execute ash (or dash) from Start/Run... or a cmd or command window. Execute '/bin/rebaseall' from ash (or dash). So I closed cygwin, went to Start/Run and tried ash and dash but got the following alert: Windows cannot find 'ash'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search. So what am I supposed to do??

  Read the article

• Asp.net 4.0 Handler Mappings Missing in IIS7

  - by Marc

  I have two Windows 2008 R2 Servers running an asp.net 4.0 app. The server that is having problems actually loads asp.net pages just fine, but if there are any ajax calls they don't work. I noticed there are no .net 4.0 specific Handler Mappings in IIS for this server like the other server has. It's literally missing all .net 4.0 mappings (.axd, .soap, .cshtm, .ashx and even .aspx). I've tried running "aspnet_regiis -ir" but that didn't help. Should I reinstall the .net 4.0 framework? Manually add all these missing mappings? Is there something else going on? What I don't want to do is add a ton of handlers to a web.config, they aren't needed on the server that works so it shouldn't be needed on the broken one.

  Read the article

< Previous Page | 869 870 871 872 873 874 875 876 877 878 879 880  | Next Page >