Search Results

Search found 89673 results on 3587 pages for 'code conversion'.

Page 879/3587 | < Previous Page | 875 876 877 878 879 880 881 882 883 884 885 886  | Next Page >

• Learnings from trying to write better software: Loud errors from the very start

  - by theo.spears

  Microsoft made a very small number of backwards incompatible changes between .NET 1.1 and 2.0, because they wanted to make it as easy and safe as possible to port applications to the new runtime. (Here’s a list.) However, one thing they did change was what happens when a background thread fails with an unhanded exception - in .NET 1.1 nothing happened, the thread terminated, and the application continued oblivious. Try the same trick in .NET 2.0 and the entire application, including all threads, will rudely terminate. There are three reasons for this. Firstly if a background thread has crashed, it may have left the entire application in an inconsistent state, in a way that will affect other threads. It’s better to terminate the entire application than continue and have the application perform actions based on a broken state, for example take customer orders, or write corrupt files to disk.  Secondly, during software development, it is far better for errors to be loud and obtrusive. Even if you have unit tests and integration tests (and you should), a key part of ensuring software works properly is to actually try using it, both through systematic testing and through the casual use all software gets by its developers during use. Subtle errors are easy to miss if you are not actually doing real work using the application, loud errors are obvious. Thirdly, and most importantly, even if catching and swallowing exceptions indiscriminately doesn't cause any problems in your application, the presence of unexpected exceptions shows you do not fully understand the behavior of your code. The currently released version of your application may be absolutely correct. However, because your mental model of the behavior is wrong, any future change you make to the program could and probably will introduce critical errors.  This applies to more than just exceptions causing threads to exit, any unexpected state should make the application blow up in an un-ignorable way. The worst thing you can do is silently swallow errors and continue. And let's be clear, writing to a log file does not count as blowing up in an un-ignorable way.  This is all simple as long as the call stack only contains your code, but when your functions start to be called by third party or .NET framework code, it's surprisingly easy for exceptions to start vanishing. Let's look at two examples.   1. Windows forms drag drop events  Usually if you throw an exception from a winforms event handler it will bring up the "application has crashed" dialog with abort and continue options. This is a good default behavior - the error is big and loud, but it is possible for the user to ignore the error and hopefully save their data, if somehow this bug makes it past testing. However drag and drop are different - throw an exception from one of these and it will just be silently swallowed with no explanation.  By the way, it's not just drag and drop events. Timer events do it too.  You can research how exceptions are treated in different handlers and code appropriately, but the safest and most user friendly approach is to always catch exceptions in your event handlers and show your own error message. I'll talk about one good approach to handling these exceptions at the end of this post.   2. SSMS integration for SQL Tab Magic  A while back wrote an SSMS add-in called SQL Tab Magic (learn more about the process here). It works by listening to certain SSMS events and remembering what documents are opened and closed. I deployed it internally and it was used for a few months by a number of people without problems, so I was reasonably confident in its quality. Before releasing I made a few cleanups, including introducing error reporting. Bam. A few days later I was looking at over 1,000 error reports in my inbox. In turns out I wasn't handling table designers properly. The exceptions were there, but again SSMS was helpfully swallowing them all for me, so I was blissfully unaware. Had I made my errors loud from the start, I would have noticed these issues long before and fixed them.   Handling exceptions  Now you are systematically catching exceptions throughout your application, you need to do something with them. I've tried 3 options: log them, alert the user, and automatically send them home.  There are a few good options for logging in .NET. The most widespread is Apache log4net, which provides a very capable and configurable logging framework. There is also NLog which has a compatible interface, with a greater emphasis on fluent rather than XML configuration.  Alerting the user serves two purposes. Firstly it means they understand their action has failed to they don't just assume it worked (Silent file copy failure is a problem if you then delete the originals) or that they should keep waiting for a background task to complete. Secondly, it means the users can report the bug to your support team, and then you can fix it. This means the message you show the user should contain the information you need as a developer to identify and fix it. And the user will probably just send you a screenshot of the dialog, so it shouldn't be hidden by scroll bars.  This leads us to the third option, automatically sending error reports home. By automatic I mean with minimal effort on the part of the user, rather than doing it silently behind their backs. The advantage of this is you can send back far more detailed and precise information than you can expect a user to include in an email, and by making it easier to report errors, you make it more likely users will do so.  We do this using a great tool called SmartAssembly (full disclosure: this is a product made by Red Gate). It captures complete stack traces including the values of all local variables and then allows the user to send all this information back with a single click. We also capture log files to help understand what lead up to the error. We then use the free SmartAssembly Sync for Jira to dedupe these reports and raise them as bugs in our bug tracking system.  The combined effect of loud errors during development and then automatic error reporting once software is deployed allows us to find and fix more bugs, correct misunderstandings on how our software works, and overall is a key piece in delivering higher quality software. However it is no substitute for having motivated cunning testers in the building - and we're looking to hire more of those too.   If you found this post interesting you should follow me on twitter.  

  Read the article

• Refactoring FizzBuzz

  - by MarkPearl

  A few years ago I blogger about FizzBuzz, at the time the post was prompted by Scott Hanselman who had podcasted about how surprized he was that some programmers could not even solve the FizzBuzz problem within a reasonable period of time during a job interview. At the time I thought I would give the problem a go in F# and sure enough the solution was fairly simple – I then also did a basic solution in C# but never posted it. Since then I have learned that being able to solve a problem and how you solve the problem are two totally different things. Today I decided to give the problem a retry and see if I had learnt anything new in the last year or so. Here is how my solution looked after refactoring… Solution 1 – Cheap and Nasty public class FizzBuzzCalculator { public string NumberFormat(int number) { var numDivisibleBy3 = (number % 3) == 0; var numDivisibleBy5 = (number % 5) == 0; if (numDivisibleBy3 && numDivisibleBy5) return String.Format("{0} FizzBuz", number); else if (numDivisibleBy3) return String.Format("{0} Fizz", number); else if (numDivisibleBy5) return String.Format("{0} Buz", number); return number.ToString(); } } class Program { static void Main(string[] args) { var fizzBuzz = new FizzBuzzCalculator(); for (int i = 0; i < 100; i++) { Console.WriteLine(fizzBuzz.NumberFormat(i)); } } } My first attempt I just looked at solving the problem – it works, and could be an acceptable solution but tonight I thought I would see how far  I could refactor it… The section I decided to focus on was the mass of if..else code in the NumberFormat method. Solution 2 – Replacing If…Else with a Dictionary public class FizzBuzzCalculator { private readonly Dictionary<Tuple<bool, bool>, string> _mappings; public FizzBuzzCalculator(Dictionary<Tuple<bool, bool>, string> mappings) { _mappings = mappings; } public string NumberFormat(int number) { var numDivisibleBy3 = (number % 3) == 0; var numDivisibleBy5 = (number % 5) == 0; var mappedKey = new Tuple<bool, bool>(numDivisibleBy3, numDivisibleBy5); return String.Format("{0} {1}", number, _mappings[mappedKey]); } } class Program { static void Main(string[] args) { var mappings = new Dictionary<Tuple<bool, bool>, string> { { new Tuple<bool, bool>(true, true), "- FizzBuzz"}, { new Tuple<bool, bool>(true, false), "- Fizz"}, { new Tuple<bool, bool>(false, true), "- Buzz"}, { new Tuple<bool, bool>(false, false), ""} }; var fizzBuzz = new FizzBuzzCalculator(mappings); for (int i = 0; i < 100; i++) { Console.WriteLine(fizzBuzz.NumberFormat(i)); } Console.ReadLine(); } } In my second attempt I looked at removing the if else in the NumberFormat method. A dictionary proved to be useful for this – I added a constructor to the class and injected the dictionary mapping. One could argue that this is totally overkill, but if I was going to use this code in a large system an approach like this makes it easy to put this data in a configuration file, which would up its OC (Open for extensibility, closed for modification principle). I could of course take the OC principle even further – the check for divisibility by 3 and 5 is tightly coupled to this class. If I wanted to make it 4 instead of 3, I would need to adjust this class. This introduces my third refactoring. Solution 3 – Introducing Delegates and Injecting them into the class public delegate bool FizzBuzzComparison(int number); public class FizzBuzzCalculator { private readonly Dictionary<Tuple<bool, bool>, string> _mappings; private readonly FizzBuzzComparison _comparison1; private readonly FizzBuzzComparison _comparison2; public FizzBuzzCalculator(Dictionary<Tuple<bool, bool>, string> mappings, FizzBuzzComparison comparison1, FizzBuzzComparison comparison2) { _mappings = mappings; _comparison1 = comparison1; _comparison2 = comparison2; } public string NumberFormat(int number) { var mappedKey = new Tuple<bool, bool>(_comparison1(number), _comparison2(number)); return String.Format("{0} {1}", number, _mappings[mappedKey]); } } class Program { private static bool DivisibleByNum(int number, int divisor) { return number % divisor == 0; } public static bool Divisibleby3(int number) { return number % 3 == 0; } public static bool Divisibleby5(int number) { return number % 5 == 0; } static void Main(string[] args) { var mappings = new Dictionary<Tuple<bool, bool>, string> { { new Tuple<bool, bool>(true, true), "- FizzBuzz"}, { new Tuple<bool, bool>(true, false), "- Fizz"}, { new Tuple<bool, bool>(false, true), "- Buzz"}, { new Tuple<bool, bool>(false, false), ""} }; var fizzBuzz = new FizzBuzzCalculator(mappings, Divisibleby3, Divisibleby5); for (int i = 0; i < 100; i++) { Console.WriteLine(fizzBuzz.NumberFormat(i)); } Console.ReadLine(); } } I have taken this one step further and introduced delegates that are injected into the FizzBuzz Calculator class, from an OC principle perspective it has probably made it more compliant than the previous Solution 2, but there seems to be a lot of noise. Anonymous Delegates increase the readability level, which is what I have done in Solution 4. Solution 4 – Anon Delegates public delegate bool FizzBuzzComparison(int number); public class FizzBuzzCalculator { private readonly Dictionary<Tuple<bool, bool>, string> _mappings; private readonly FizzBuzzComparison _comparison1; private readonly FizzBuzzComparison _comparison2; public FizzBuzzCalculator(Dictionary<Tuple<bool, bool>, string> mappings, FizzBuzzComparison comparison1, FizzBuzzComparison comparison2) { _mappings = mappings; _comparison1 = comparison1; _comparison2 = comparison2; } public string NumberFormat(int number) { var mappedKey = new Tuple<bool, bool>(_comparison1(number), _comparison2(number)); return String.Format("{0} {1}", number, _mappings[mappedKey]); } } class Program { static void Main(string[] args) { var mappings = new Dictionary<Tuple<bool, bool>, string> { { new Tuple<bool, bool>(true, true), "- FizzBuzz"}, { new Tuple<bool, bool>(true, false), "- Fizz"}, { new Tuple<bool, bool>(false, true), "- Buzz"}, { new Tuple<bool, bool>(false, false), ""} }; var fizzBuzz = new FizzBuzzCalculator(mappings, (n) => n % 3 == 0, (n) => n % 5 == 0); for (int i = 0; i < 100; i++) { Console.WriteLine(fizzBuzz.NumberFormat(i)); } Console.ReadLine(); } }   Using the anonymous delegates I think the noise level has now been reduced. This is where I am going to end this post, I have gone through 4 iterations of the code from the initial solution using If..Else to delegates and dictionaries. I think each approach would have it’s pro’s and con’s and depending on the intention of where the code would be used would be a large determining factor. If you can think of an alternative way to do FizzBuzz, add a comment!

  Read the article

• Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

  - by arlendo

  Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

  Read the article

• What does Ruby have that Python doesn't, and vice versa?

  - by Lennart Regebro

  There is a lot of discussions of Python vs Ruby, and I all find them completely unhelpful, because they all turn around why feature X sucks in language Y, or that claim language Y doesn't have X, although in fact it does. I also know exactly why I prefer Python, but that's also subjective, and wouldn't help anybody choosing, as they might not have the same tastes in development as I do. It would therefore be interesting to list the differences, objectively. So no "Python's lambdas sucks". Instead explain what Ruby's lambdas can do that Python's can't. No subjectivity. Example code is good! Don't have several differences in one answer, please. And vote up the ones you know are correct, and down those you know are incorrect (or are subjective). Also, differences in syntax is not interesting. We know Python does with indentation what Ruby does with brackets and ends, and that @ is called self in Python. UPDATE: This is now a community wiki, so we can add the big differences here. Ruby has a class reference in the class body In Ruby you have a reference to the class (self) already in the class body. In Python you don't have a reference to the class until after the class construction is finished. An example: class Kaka puts self end self in this case is the class, and this code would print out "Kaka". There is no way to print out the class name or in other ways access the class from the class definition body in Python. All classes are mutable in Ruby This lets you develop extensions to core classes. Here's an example of a rails extension: class String def starts_with?(other) head = self[0, other.length] head == other end end Ruby has Perl-like scripting features Ruby has first class regexps, $-variables, the awk/perl line by line input loop and other features that make it more suited to writing small shell scripts that munge text files or act as glue code for other programs. Ruby has first class continuations Thanks to the callcc statement. In Python you can create continuations by various techniques, but there is no support built in to the language. Ruby has blocks With the "do" statement you can create a multi-line anonymous function in Ruby, which will be passed in as an argument into the method in front of do, and called from there. In Python you would instead do this either by passing a method or with generators. Ruby: amethod { |here| many=lines+of+code goes(here) } Python: def function(here): many=lines+of+code goes(here) amethod(function) Interestingly, the convenience statement in Ruby for calling a block is called "yield", which in Python will create a generator. Ruby: def themethod yield 5 end themethod do |foo| puts foo end Python: def themethod(): yield 5 for foo in themethod: print foo Although the principles are different, the result is strikingly similar. Python has built-in generators (which are used like Ruby blocks, as noted above) Python has support for generators in the language. In Ruby you could use the generator module that uses continuations to create a generator from a block. Or, you could just use a block/proc/lambda! Moreover, in Ruby 1.9 Fibers are, and can be used as, generators. docs.python.org has this generator example: def reverse(data): for index in range(len(data)-1, -1, -1): yield data[index] Contrast this with the above block examples. Python has flexible name space handling In Ruby, when you import a file with require, all the things defined in that file will end up in your global namespace. This causes namespace pollution. The solution to that is Rubys modules. But if you create a namespace with a module, then you have to use that namespace to access the contained classes. In Python, the file is a module, and you can import its contained names with from themodule import *, thereby polluting the namespace if you want. But you can also import just selected names with from themodule import aname, another or you can simply import themodule and then access the names with themodule.aname. If you want more levels in your namespace you can have packages, which are directories with modules and an __init__.py file. Python has docstrings Docstrings are strings that are attached to modules, functions and methods and can be introspected at runtime. This helps for creating such things as the help command and automatic documentation. def frobnicate(bar): """frobnicate takes a bar and frobnicates it >>> bar = Bar() >>> bar.is_frobnicated() False >>> frobnicate(bar) >>> bar.is_frobnicated() True """ Python has more libraries Python has a vast amount of available modules and bindings for libraries. Python has multiple inheritance Ruby does not ("on purpose" -- see Ruby's website, see here how it's done in Ruby). It does reuse the module concept as a sort of abstract classes. Python has list/dict comprehensions Python: res = [x*x for x in range(1, 10)] Ruby: res = (0..9).map { |x| x * x } Python: >>> (x*x for x in range(10)) <generator object <genexpr> at 0xb7c1ccd4> >>> list(_) [0, 1, 4, 9, 16, 25, 36, 49, 64, 81] Ruby: p = proc { |x| x * x } (0..9).map(&p) Python: >>> {x:str(y*y) for x,y in {1:2, 3:4}.items()} {1: '4', 3: '16'} Ruby: >> Hash[{1=>2, 3=>4}.map{|x,y| [x,(y*y).to_s]}] => {1=>"4", 3=>"16"} Python has decorators Things similar to decorators can be created in Ruby, and it can also be argued that they aren't as necessary as in Python.

  Read the article

• how to define a field of view for the entire map for shadow?

  - by Mehdi Bugnard

  I recently added "Shadow Mapping" in my XNA games to include shadows. I followed the nice and famous tutorial from "Riemers" : http://www.riemers.net/eng/Tutorials/XNA/Csharp/Series3/Shadow_map.php . This code work nice and I can see my source of light and shadow. But the problem is that my light source does not match the field of view that I created. I want the light covers the entire map of my game. I don't know why , but the light only affect 2-3 cubes of my map. ScreenShot: (the emission of light illuminates only 2-3 blocks and not the full map) Here is my code i create the fieldOfView for LightviewProjection Matrix: Vector3 lightDir = new Vector3(10, 52, 10); lightPos = new Vector3(10, 52, 10); Matrix lightsView = Matrix.CreateLookAt(lightPos, new Vector3(105, 50, 105), new Vector3(0, 1, 0)); Matrix lightsProjection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver2, 1f, 20f, 1000f); lightsViewProjectionMatrix = lightsView * lightsProjection; As you can see , my nearPlane and FarPlane are set to 20f and 100f . So i don't know why the light stop after 2 cubes. it's should be bigger Here is set the value to my custom effect HLSL in the shader file /* SHADOW VALUE */ effectWorld.Parameters["LightDirection"].SetValue(lightDir); effectWorld.Parameters["xLightsWorldViewProjection"].SetValue(Matrix.Identity * .lightsViewProjectionMatrix); effectWorld.Parameters["xWorldViewProjection"].SetValue(Matrix.Identity * arcadia.camera.View * arcadia.camera.Projection); effectWorld.Parameters["xLightPower"].SetValue(1f); effectWorld.Parameters["xAmbient"].SetValue(0.3f); Here is my custom HLSL shader effect file "*.fx" // This sample uses a simple Lambert lighting model. float3 LightDirection = normalize(float3(-1, -1, -1)); float3 DiffuseLight = 1.25; float3 AmbientLight = 0.25; uniform const float3 DiffuseColor = 1; uniform const float Alpha = 1; uniform const float3 EmissiveColor = 0; uniform const float3 SpecularColor = 1; uniform const float SpecularPower = 16; uniform const float3 EyePosition; // FOG attribut uniform const float FogEnabled ; uniform const float FogStart ; uniform const float FogEnd ; uniform const float3 FogColor ; float3 cameraPos : CAMERAPOS; texture Texture; sampler Sampler = sampler_state { Texture = (Texture); magfilter = LINEAR; minfilter = LINEAR; mipfilter = LINEAR; AddressU = mirror; AddressV = mirror; }; texture xShadowMap; sampler ShadowMapSampler = sampler_state { Texture = <xShadowMap>; magfilter = LINEAR; minfilter = LINEAR; mipfilter = LINEAR; AddressU = clamp; AddressV = clamp; }; /* *************** */ /* SHADOW MAP CODE */ /* *************** */ struct SMapVertexToPixel { float4 Position : POSITION; float4 Position2D : TEXCOORD0; }; struct SMapPixelToFrame { float4 Color : COLOR0; }; struct SSceneVertexToPixel { float4 Position : POSITION; float4 Pos2DAsSeenByLight : TEXCOORD0; float2 TexCoords : TEXCOORD1; float3 Normal : TEXCOORD2; float4 Position3D : TEXCOORD3; }; struct SScenePixelToFrame { float4 Color : COLOR0; }; float DotProduct(float3 lightPos, float3 pos3D, float3 normal) { float3 lightDir = normalize(pos3D - lightPos); return dot(-lightDir, normal); } SSceneVertexToPixel ShadowedSceneVertexShader(float4 inPos : POSITION, float2 inTexCoords : TEXCOORD0, float3 inNormal : NORMAL) { SSceneVertexToPixel Output = (SSceneVertexToPixel)0; Output.Position = mul(inPos, xWorldViewProjection); Output.Pos2DAsSeenByLight = mul(inPos, xLightsWorldViewProjection); Output.Normal = normalize(mul(inNormal, (float3x3)World)); Output.Position3D = mul(inPos, World); Output.TexCoords = inTexCoords; return Output; } SScenePixelToFrame ShadowedScenePixelShader(SSceneVertexToPixel PSIn) { SScenePixelToFrame Output = (SScenePixelToFrame)0; float2 ProjectedTexCoords; ProjectedTexCoords[0] = PSIn.Pos2DAsSeenByLight.x / PSIn.Pos2DAsSeenByLight.w / 2.0f + 0.5f; ProjectedTexCoords[1] = -PSIn.Pos2DAsSeenByLight.y / PSIn.Pos2DAsSeenByLight.w / 2.0f + 0.5f; float diffuseLightingFactor = 0; if ((saturate(ProjectedTexCoords).x == ProjectedTexCoords.x) && (saturate(ProjectedTexCoords).y == ProjectedTexCoords.y)) { float depthStoredInShadowMap = tex2D(ShadowMapSampler, ProjectedTexCoords).r; float realDistance = PSIn.Pos2DAsSeenByLight.z / PSIn.Pos2DAsSeenByLight.w; if ((realDistance - 1.0f / 100.0f) <= depthStoredInShadowMap) { diffuseLightingFactor = DotProduct(xLightPos, PSIn.Position3D, PSIn.Normal); diffuseLightingFactor = saturate(diffuseLightingFactor); diffuseLightingFactor *= xLightPower; } } float4 baseColor = tex2D(Sampler, PSIn.TexCoords); Output.Color = baseColor*(diffuseLightingFactor + xAmbient); return Output; } SMapVertexToPixel ShadowMapVertexShader(float4 inPos : POSITION) { SMapVertexToPixel Output = (SMapVertexToPixel)0; Output.Position = mul(inPos, xLightsWorldViewProjection); Output.Position2D = Output.Position; return Output; } SMapPixelToFrame ShadowMapPixelShader(SMapVertexToPixel PSIn) { SMapPixelToFrame Output = (SMapPixelToFrame)0; Output.Color = PSIn.Position2D.z / PSIn.Position2D.w; return Output; } /* ******************* */ /* END SHADOW MAP CODE */ /* ******************* */ / For rendering without instancing. technique ShadowMap { pass Pass0 { VertexShader = compile vs_2_0 ShadowMapVertexShader(); PixelShader = compile ps_2_0 ShadowMapPixelShader(); } } technique ShadowedScene { /* pass Pass0 { VertexShader = compile vs_2_0 VSBasicTx(); PixelShader = compile ps_2_0 PSBasicTx(); } */ pass Pass1 { VertexShader = compile vs_2_0 ShadowedSceneVertexShader(); PixelShader = compile ps_2_0 ShadowedScenePixelShader(); } } technique SimpleFog { pass Pass0 { VertexShader = compile vs_2_0 VSBasicTx(); PixelShader = compile ps_2_0 PSBasicTx(); } } I edited my fx file , for show you only information and functions about the shadow ;-)

  Read the article

• Very simple, terse and easy GUI programming “frameworks”

  - by jetxee

  Please list GUI programming libraries, toolkits, frameworks which allow to write GUI apps quickly. I mean in such a way, that GUI is described entirely in a human-readable (and human-writable) plain text file (code) code is terse (1 or 2 lines of code per widget/event pair), suitable for scripting structure and operation of the GUI is evident from the code (nesting of widgets and flow of events) details about how to build the GUI are hidden (things like mainloop, attaching event listeners, etc.) auto-layouts are supported (vboxes, hboxes, etc.) As answers suggest, this may be defined as declarative GUI programming, but it is not necessarily such. Any approach is OK if it works, is easy to use and terse. There are some GUI libraries/toolkits like this. They are listed below. Please extend the list if you see a qualifying toolkit missing. Indicate if the project is crossplatform, mature, active, and give an example if possible. Please use this wiki to discuss only Open Source projects. This is the list so far (in alphabetical order): Fudgets Fudgets is a Haskell library. Platform: Unix. Status: Experimental, but still maintained. An example: import Fudgets main = fudlogue (shellF "Hello" (labelF "Hello, world!" >+< quitButtonF)) GNUstep Renaissance Renaissance allows to describe GUI in simple XML. Platforms: OSX/GNUstep. Status: part of GNUstep. An example below: <window title="Example"> <vbox> <label font="big"> Click the button below to quit the application </label> <button title="Quit" action="terminate:"/> </vbox> </window> HTML HTML-based GUI (HTML + JS). Crossplatform, mature. Can be used entirely on the client side. Looking for a nice “helloworld” example. JavaFX JavaFX is usable for standalone (desktop) apps as well as for web applications. Not completely crossplatform, not yet completely open source. Status: 1.0 release. An example: Frame { content: Button { text: "Press Me" action: operation() { System.out.println("You pressed me"); } } visible: true } Screenshot is needed. Phooey Phooey is another Haskell library. Crossplatform (wxWidgets), HTML+JS backend planned. Mature and active. An example (a little more than a helloworld): ui1 :: UI () ui1 = title "Shopping List" $ do a <- title "apples" $ islider (0,10) 3 b <- title "bananas" $ islider (0,10) 7 title "total" $ showDisplay (liftA2 (+) a b) PythonCard PythonCard describes GUI in a Python dictionary. Crossplatform (wxWidgets). Some apps use it, but the project seems stalled. There is an active fork. I skip PythonCard example because it is too verbose for the contest. Shoes Shoes for Ruby. Platforms: Win/OSX/GTK+. Status: Young but active. A minimal app looks like this: Shoes.app { @push = button "Push me" @note = para "Nothing pushed so far" @push.click { @note.replace "Aha! Click!" } } Tcl/Tk Tcl/Tk. Crossplatform (its own widget set). Mature (probably even dated) and active. An example: #!/usr/bin/env wish button .hello -text "Hello, World!" -command { exit } pack .hello tkwait window . tekUI tekUI for Lua (and C). Platforms: X11, DirectFB. Status: Alpha (usable, but API still evolves). An example: #/usr/bin/env lua ui = require "tek.ui" ui.Application:new { Children = { ui.Window:new { Title = "Hello", Children = { ui.Text:new { Text = "_Hello, World!", Style = "button", Mode = "button", }, }, }, }, }:run() Treethon Treethon for Python. It describes GUI in a YAML file (Python in a YAML tree). Platform: GTK+. Status: work in proress. A simple app looks like this: _import: gtk view: gtk.Window() add: - view: gtk.Button('Hello World') on clicked: print view.get_label() Yet unnamed Python library by Richard Jones: This one is not released yet. The idea is to use Python context managers (with keyword) to structure GUI code. See Richard Jones' blog for details. with gui.vertical: text = gui.label('hello!') items = gui.selection(['one', 'two', 'three']) with gui.button('click me!'): def on_click(): text.value = items.value text.foreground = red XUL XUL + Javascript may be used to create stand-alone desktop apps with XULRunner as well as Mozilla extensions. Mature, open source, crossplatform. <?xml version="1.0"?> <?xml-stylesheet href="chrome://global/skin/" type="text/css"?> <window id="main" title="My App" width="300" height="300" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"> <caption label="Hello World"/> </window> Thank your for contributions!

  Read the article

• What is stopping data flow with .NET 3.5 asynchronous System.Net.Sockets.Socket?

  - by TonyG

  I have a .NET 3.5 client/server socket interface using the asynchronous methods. The client connects to the server and the connection should remain open until the app terminates. The protocol consists of the following pattern: send stx receive ack send data1 receive ack send data2 (repeat 5-6 while more data) receive ack send etx So a single transaction with two datablocks as above would consist of 4 sends from the client. After sending etx the client simply waits for more data to send out, then begins the next transmission with stx. I do not want to break the connection between individual exchanges or after each stx/data/etx payload. Right now, after connection, the client can send the first stx, and get a single ack, but I can't put more data onto the wire after that. Neither side disconnects, the socket is still intact. The client code is seriously abbreviated as follows - I'm following the pattern commonly available in online code samples. private void SendReceive(string data) { // ... SocketAsyncEventArgs completeArgs; completeArgs.Completed += new EventHandler<SocketAsyncEventArgs>(OnSend); clientSocket.SendAsync(completeArgs); // two AutoResetEvents, one for send, one for receive if ( !AutoResetEvent.WaitAll(autoSendReceiveEvents , -1) ) Log("failed"); else Log("success"); // ... } private void OnSend( object sender , SocketAsyncEventArgs e ) { // ... Socket s = e.UserToken as Socket; byte[] receiveBuffer = new byte[ 4096 ]; e.SetBuffer(receiveBuffer , 0 , receiveBuffer.Length); e.Completed += new EventHandler<SocketAsyncEventArgs>(OnReceive); s.ReceiveAsync(e); // ... } private void OnReceive( object sender , SocketAsyncEventArgs e ) {} // ... if ( e.BytesTransferred > 0 ) { Int32 bytesTransferred = e.BytesTransferred; String received = Encoding.ASCII.GetString(e.Buffer , e.Offset , bytesTransferred); dataReceived += received; } autoSendReceiveEvents[ SendOperation ].Set(); // could be moved elsewhere autoSendReceiveEvents[ ReceiveOperation ].Set(); // releases mutexes } The code on the server is very similar except that it receives first and then sends a response - the server is not doing anything (that I can tell) to modify the connection after it sends a response. The problem is that the second time I hit SendReceive in the client, the connection is already in a weird state. Do I need to do something in the client to preserve the SocketAsyncEventArgs, and re-use the same object for the lifetime of the socket/connection? I'm not sure which eventargs object should hang around during the life of the connection or a given exchange. Do I need to do something, or Not do something in the server to ensure it continues to Receive data? The server setup and response processing looks like this: void Start() { // ... listenSocket.Bind(...); listenSocket.Listen(0); StartAccept(null); // note accept as soon as we start. OK? mutex.WaitOne(); } void StartAccept(SocketAsyncEventArgs acceptEventArg) { if ( acceptEventArg == null ) { acceptEventArg = new SocketAsyncEventArgs(); acceptEventArg.Completed += new EventHandler<SocketAsyncEventArgs>(OnAcceptCompleted); } Boolean willRaiseEvent = this.listenSocket.AcceptAsync(acceptEventArg); if ( !willRaiseEvent ) ProcessAccept(acceptEventArg); // ... } private void OnAcceptCompleted( object sender , SocketAsyncEventArgs e ) { ProcessAccept(e); } private void ProcessAccept( SocketAsyncEventArgs e ) { // ... SocketAsyncEventArgs readEventArgs = new SocketAsyncEventArgs(); readEventArgs.SetBuffer(dataBuffer , 0 , Int16.MaxValue); readEventArgs.Completed += new EventHandler<SocketAsyncEventArgs>(OnIOCompleted); readEventArgs.UserToken = e.AcceptSocket; dataReceived = ""; // note server is degraded for single client/thread use // As soon as the client is connected, post a receive to the connection. Boolean willRaiseEvent = e.AcceptSocket.ReceiveAsync(readEventArgs); if ( !willRaiseEvent ) this.ProcessReceive(readEventArgs); // Accept the next connection request. this.StartAccept(e); } private void OnIOCompleted( object sender , SocketAsyncEventArgs e ) { // switch ( e.LastOperation ) case SocketAsyncOperation.Receive: ProcessReceive(e); // similar to client code // operate on dataReceived here case SocketAsyncOperation.Send: ProcessSend(e); // similar to client code } // execute this when a data has been processed into a response (ack, etc) private SendResponseToClient(string response) { // create buffer with response // currentEventArgs has class scope and is re-used currentEventArgs.SetBuffer(sendBuffer , 0 , sendBuffer.Length); Boolean willRaiseEvent = currentClient.SendAsync(currentEventArgs); if ( !willRaiseEvent ) ProcessSend(currentEventArgs); } A .NET trace shows the following when sending ABC\r\n: Socket#7588182::SendAsync() Socket#7588182::SendAsync(True#1) Data from Socket#7588182::FinishOperation(SendAsync) 00000000 : 41 42 43 0D 0A Socket#7588182::ReceiveAsync() Exiting Socket#7588182::ReceiveAsync() - True#1 And it stops there. It looks just like the first send from the client but the server shows no activity. I think that could be info overload for now but I'll be happy to provide more details as required. Thanks!

  Read the article

• Neural Network Always Produces Same/Similar Outputs for Any Input

  - by l33tnerd

  I have a problem where I am trying to create a neural network for Tic-Tac-Toe. However, for some reason, training the neural network causes it to produce nearly the same output for any given input. I did take a look at Artificial neural networks benchmark, but my network implementation is built for neurons with the same activation function for each neuron, i.e. no constant neurons. To make sure the problem wasn't just due to my choice of training set (1218 board states and moves generated by a genetic algorithm), I tried to train the network to reproduce XOR. The logistic activation function was used. Instead of using the derivative, I multiplied the error by output*(1-output) as some sources suggested that this was equivalent to using the derivative. I can put the Haskell source on HPaste, but it's a little embarrassing to look at. The network has 3 layers: the first layer has 2 inputs and 4 outputs, the second has 4 inputs and 1 output, and the third has 1 output. Increasing to 4 neurons in the second layer didn't help, and neither did increasing to 8 outputs in the first layer. I then calculated errors, network output, bias updates, and the weight updates by hand based on http://hebb.mit.edu/courses/9.641/2002/lectures/lecture04.pdf to make sure there wasn't an error in those parts of the code (there wasn't, but I will probably do it again just to make sure). Because I am using batch training, I did not multiply by x in equation (4) there. I am adding the weight change, though http://www.faqs.org/faqs/ai-faq/neural-nets/part2/section-2.html suggests to subtract it instead. The problem persisted, even in this simplified network. For example, these are the results after 500 epochs of batch training and of incremental training. Input |Target|Output (Batch) |Output(Incremental) [1.0,1.0]|[0.0] |[0.5003781562785173]|[0.5009731800870864] [1.0,0.0]|[1.0] |[0.5003740346965251]|[0.5006347214672715] [0.0,1.0]|[1.0] |[0.5003734471544522]|[0.500589332376345] [0.0,0.0]|[0.0] |[0.5003674110937019]|[0.500095157458231] Subtracting instead of adding produces the same problem, except everything is 0.99 something instead of 0.50 something. 5000 epochs produces the same result, except the batch-trained network returns exactly 0.5 for each case. (Heck, even 10,000 epochs didn't work for batch training.) Is there anything in general that could produce this behavior? Also, I looked at the intermediate errors for incremental training, and the although the inputs of the hidden/input layers varied, the error for the output neuron was always +/-0.12. For batch training, the errors were increasing, but extremely slowly and the errors were all extremely small (x10^-7). Different initial random weights and biases made no difference, either. Note that this is a school project, so hints/guides would be more helpful. Although reinventing the wheel and making my own network (in a language I don't know well!) was a horrible idea, I felt it would be more appropriate for a school project (so I know what's going on...in theory, at least. There doesn't seem to be a computer science teacher at my school). EDIT: Two layers, an input layer of 2 inputs to 8 outputs, and an output layer of 8 inputs to 1 output, produces much the same results: 0.5+/-0.2 (or so) for each training case. I'm also playing around with pyBrain, seeing if any network structure there will work. Edit 2: I am using a learning rate of 0.1. Sorry for forgetting about that. Edit 3: Pybrain's "trainUntilConvergence" doesn't get me a fully trained network, either, but 20000 epochs does, with 16 neurons in the hidden layer. 10000 epochs and 4 neurons, not so much, but close. So, in Haskell, with the input layer having 2 inputs & 2 outputs, hidden layer with 2 inputs and 8 outputs, and output layer with 8 inputs and 1 output...I get the same problem with 10000 epochs. And with 20000 epochs. Edit 4: I ran the network by hand again based on the MIT PDF above, and the values match, so the code should be correct unless I am misunderstanding those equations. Some of my source code is at http://hpaste.org/42453/neural_network__not_working; I'm working on cleaning my code somewhat and putting it in a Github (rather than a private Bitbucket) repository. All of the relevant source code is now at https://github.com/l33tnerd/hsann.

  Read the article

• Checking who is connected to your server, with PowerShell.

  - by Fatherjack

  There are many occasions when, as a DBA, you want to see who is connected to your SQL Server, along with how they are connecting and what sort of activities they are carrying out. I’m going to look at a couple of ways of getting this information and compare the effort required and the results achieved of each. SQL Server comes with a couple of stored procedures to help with this sort of task – sp_who and its undocumented counterpart sp_who2. There is also the pumped up version of these called sp_whoisactive, written by Adam Machanic which does way more than these procedures. I wholly recommend you try it out if you don’t already know how it works. When it comes to serious interrogation of your SQL Server activity then it is absolutely indispensable. Anyway, back to the point of this blog, we are going to look at getting the information from sp_who2 for a remote server. I wrote this Powershell script a week or so ago and was quietly happy with it for a while. I’m relatively new to Powershell so forgive both my rather low threshold for entertainment and the fact that something so simple is a moderate achievement for me. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server # connection and query stuff         $ConnectionStr = "Server=$Server;Database=Master;Integrated Security=True" $Query = "EXEC sp_who2" $Connection = new-object system.Data.SQLClient.SQLConnection $Table = new-object "System.Data.DataTable" $Connection.connectionstring = $ConnectionStr try{ $Connection.open() $Command = $Connection.CreateCommand() $Command.commandtext = $Query $result = $Command.ExecuteReader() $Table.Load($result) } catch{ # Show error $error[0] | format-list -Force } $Title = "Data access processes (" + $Table.Rows.Count + ")" $Table | Out-GridView -Title $Title $Connection.close() So this is pretty straightforward, create an SMO object that represents our chosen server, define a connection to the database and a table object for the results when we get them, execute our query over the connection, load the results into our table object and then, if everything is error free display these results to the PowerShell grid viewer. The query simply gets the results of ‘EXEC sp_who2′ for us. Depending on how many connections there are will influence how long the query runs. The grid viewer lets me sort and search the results so it can be a pretty handy way to locate troublesome connections. Like I say, I was quite pleased with this, it seems a pretty simple script and was working well for me, I have added a few parameters to control the output and give me more specific details but then I see a script that uses the $SMOServer object itself to provide the process information and saves having to define the connection object and query specifications. $Server = 'SERVERNAME' $SMOServer = New-Object Microsoft.SQLServer.Management.SMO.Server $Server $Processes = $SMOServer.EnumProcesses() $Title = "SMO processes (" + $Processes.Rows.Count + ")" $Processes | Out-GridView -Title $Title Create the SMO object of our server and then call the EnumProcesses method to get all the process information from the server. Staggeringly simple! The results are a little different though. Some columns are the same and we can see the same basic information so my first thought was to which runs faster – so that I can get my results more quickly and also so that I place less stress on my server(s). PowerShell comes with a great way of testing this – the Measure-Command function. All you have to do is wrap your piece of code in Measure-Command {[your code here]} and it will spit out the time taken to execute the code. So, I placed both of the above methods of getting SQL Server process connections in two Measure-Command wrappers and pressed F5! The Powershell console goes blank for a while as the code is executed internally when Measure-Command is used but the grid viewer windows appear and the console shows this. You can take the output from Measure-Command and format it for easier reading but in a simple comparison like this we can simply cross refer the TotalMilliseconds values from the two result sets to see how the two methods performed. The query execution method (running EXEC sp_who2 ) is the first set of timings and the SMO EnumProcesses is the second. I have run these on a variety of servers and while the results vary from execution to execution I have never seen the SMO version slower than the other. The difference has varied and the time for both has ranged from sub-second as we see above to almost 5 seconds on other systems. This difference, I would suggest is partly due to the cost overhead of having to construct the data connection and so on where as the SMO EnumProcesses method has the connection to the server already in place and just needs to call back the process information. There is also the difference in the data sets to consider. Let’s take a look at what we get and where the two methods differ Query execution method (sp_who2) SMO EnumProcesses Description - Urn What looks like an XML or JSON representation of the server name and the process ID SPID Spid The process ID Status Status The status of the process Login Login The login name of the user executing the command HostName Host The name of the computer where the  process originated BlkBy BlockingSpid The SPID of a process that is blocking this one DBName Database The database that this process is connected to Command Command The type of command that is executing CPUTime Cpu The CPU activity related to this process DiskIO - The Disk IO activity related to this process LastBatch - The time the last batch was executed from this process. ProgramName Program The application that is facilitating the process connection to the SQL Server. SPID1 - In my experience this is always the same value as SPID. REQUESTID - In my experience this is always 0 - Name In my experience this is always the same value as SPID and so could be seen as analogous to SPID1 from sp_who2 - MemUsage An indication of the memory used by this process but I don’t know what it is measured in (bytes, Kb, Mb…) - IsSystem True or False depending on whether the process is internal to the SQL Server instance or has been created by an external connection requesting data. - ExecutionContextID In my experience this is always 0 so could be analogous to REQUESTID from sp_who2. Please note, these are my own very brief descriptions of these columns, detail can be found from MSDN for columns in the sp_who results here http://msdn.microsoft.com/en-GB/library/ms174313.aspx. Where the columns are common then I would use that description, in other cases then the information returned is purely for interpretation by the reader. Rather annoyingly both result sets have useful information that the other doesn’t. sp_who2 returns Disk IO and LastBatch information which is really useful but the SMO processes method give you IsSystem and MemUsage which have their place in fault diagnosis methods too. So which is better? On reflection I think I prefer to use the sp_who2 method primarily but knowing that the SMO Enumprocesses method is there when I need it is really useful and I’m sure I’ll use it regularly. I’m OK with the fact that it is the slower method because Measure-Command has shown me how close it is to the other option and that it really isn’t a large enough margin to matter.

  Read the article

• Problem with entityForName & ManagedObjectContext when extending tutorial material

  - by Martin KS

  Afternoon all, I tried to add a second data entity to the persistent store in the (locations) coredata tutorial code, and then access this in a new view. I think that I've followed the tutorial, and checked that I'm doing a clean build etc, but can't see what to change to prevent it crashing. I'm afraid I'm at my wits end with this one, and can't seem to find the step that I've missed. I've pasted the header and code files below, please let me know if I need to share any more of the code. The crash seems to happen on the line: NSEntityDescription *entity = [NSEntityDescription entityForName:@"Album" inManagedObjectContext:[self managedObjectContext]]; There is one other line in the code that refers to galleryviewcontroller at the moment, and that's in the main application delegate: galleryViewController.managedObjectContext = [self managedObjectContext]; GalleryViewController.h #import <UIKit/UIKit.h> @interface GalleryViewController : UIViewController { NSManagedObjectContext *managedObjectContext; int rowNumber; IBOutlet UILabel *lblMessage; UIBarButtonItem *addButton; NSMutableArray *imagesArray; } @property (readwrite) int rowNumber; @property (nonatomic,retain) UILabel *lblMessage; @property (nonatomic,retain) NSMutableArray *imagesArray; @property (nonatomic, retain) NSManagedObjectContext *managedObjectContext; @property (nonatomic, retain) UIBarButtonItem *addButton; -(void)updateRowNumber:(int)theIndex; -(void)addImage; @end GalleryViewController.m #import "RootViewController.h" #import "LocationsAppDelegate.h" #import "Album.h" #import "GalleryViewController.h" #import "Image.h" @implementation GalleryViewController @synthesize lblMessage,rowNumber,addButton,managedObjectContext; @synthesize imagesArray; /* // The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if ((self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil])) { // Custom initialization } return self; } */ -(void)updateRowNumber:(int)theIndex{ rowNumber=theIndex; LocationsAppDelegate *mainDelegate =(LocationsAppDelegate *)[[UIApplication sharedApplication] delegate]; Album *anAlbum = [mainDelegate.albumsArray objectAtIndex:rowNumber]; lblMessage.text = anAlbum.uniqueAlbumIdentifier; } // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; addButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemAdd target:self action:@selector(addImage)]; addButton.enabled = YES; self.navigationItem.rightBarButtonItem = addButton; /* Found this in another answer, adding it to the code didn't help. if (managedObjectContext == nil) { managedObjectContext = [[[UIApplication sharedApplication] delegate] managedObjectContext]; } */ NSFetchRequest *request = [[NSFetchRequest alloc] init]; NSEntityDescription *entity = [NSEntityDescription entityForName:@"Album" inManagedObjectContext:[self managedObjectContext]]; [request setEntity:entity]; // Order the albums by creation date, most recent first. NSSortDescriptor *sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"imagePath" ascending:NO]; NSArray *sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptor release]; [sortDescriptors release]; // Execute the fetch -- create a mutable copy of the result. NSError *error = nil; NSMutableArray *mutableFetchResults = [[managedObjectContext executeFetchRequest:request error:&error] mutableCopy]; if (mutableFetchResults == nil) { // Handle the error. } [self setImagesArray:mutableFetchResults]; int a = 5; int b = 10; for( int i=0; i<[imagesArray count]; i++ ) { if( a == 325 ) { a = 5; b += 70; } UIImageView *any = [[UIImageView alloc] initWithFrame:CGRectMake(a,b,70,60)]; any.image = [imagesArray objectAtIndex:i]; any.tag = i; [self.view addSubview:any]; [any release]; a += 80; } } -(void)addImage{ NSString *msg = [NSString stringWithFormat:@"%i",rowNumber]; UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Add image to" message:msg delegate:self cancelButtonTitle:@"No" otherButtonTitles:@"Yes", nil]; [alert show]; [alert release]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { [super viewDidUnload]; } - (void)dealloc { [lblMessage release]; [managedObjectContext release]; [super dealloc]; } @end

  Read the article

• How do I use texture-mapping in a simple ray tracer?

  - by fastrack20

  I am attempting to add features to a ray tracer in C++. Namely, I am trying to add texture mapping to the spheres. For simplicity, I am using an array to store the texture data. I obtained the texture data by using a hex editor and copying the correct byte values into an array in my code. This was just for my testing purposes. When the values of this array correspond to an image that is simply red, it appears to work close to what is expected except there is no shading. The bottom right of the image shows what a correct sphere should look like. This sphere's colour using one set colour, not a texture map. Another problem is that when the texture map is of something other than just one colour pixels, it turns white. My test image is a picture of water, and when it maps, it shows only one ring of bluish pixels surrounding the white colour. When this is done, it simply appears as this: Here are a few code snippets: Color getColor(const Object *object,const Ray *ray, float *t) { if (object->materialType == TEXTDIF || object->materialType == TEXTMATTE) { float distance = *t; Point pnt = ray->origin + ray->direction * distance; Point oc = object->center; Vector ve = Point(oc.x,oc.y,oc.z+1) - oc; Normalize(&ve); Vector vn = Point(oc.x,oc.y+1,oc.z) - oc; Normalize(&vn); Vector vp = pnt - oc; Normalize(&vp); double phi = acos(-vn.dot(vp)); float v = phi / M_PI; float u; float num1 = (float)acos(vp.dot(ve)); float num = (num1 /(float) sin(phi)); float theta = num /(float) (2 * M_PI); if (theta < 0 || theta == NAN) {theta = 0;} if (vn.cross(ve).dot(vp) > 0) { u = theta; } else { u = 1 - theta; } int x = (u * IMAGE_WIDTH) -1; int y = (v * IMAGE_WIDTH) -1; int p = (y * IMAGE_WIDTH + x)*3; return Color(TEXT_DATA[p+2],TEXT_DATA[p+1],TEXT_DATA[p]); } else { return object->color; } }; I call the colour code here in Trace: if (object->materialType == MATTE) return getColor(object, ray, &t); Ray shadowRay; int isInShadow = 0; shadowRay.origin.x = pHit.x + nHit.x * bias; shadowRay.origin.y = pHit.y + nHit.y * bias; shadowRay.origin.z = pHit.z + nHit.z * bias; shadowRay.direction = light->object->center - pHit; float len = shadowRay.direction.length(); Normalize(&shadowRay.direction); float LdotN = shadowRay.direction.dot(nHit); if (LdotN < 0) return 0; Color lightColor = light->object->color; for (int k = 0; k < numObjects; k++) { if (Intersect(objects[k], &shadowRay, &t) && !objects[k]->isLight) { if (objects[k]->materialType == GLASS) lightColor *= getColor(objects[k], &shadowRay, &t); // attenuate light color by glass color else isInShadow = 1; break; } } lightColor *= 1.f/(len*len); return (isInShadow) ? 0 : getColor(object, &shadowRay, &t) * lightColor * LdotN; } I left out the rest of the code as to not bog down the post, but it can be seen here. Any help is greatly appreciated. The only portion not included in the code, is where I define the texture data, which as I said, is simply taken straight from a bitmap file of the above image. Thanks.

  Read the article

• Behavior Driven Development (BDD) and DevExpress XAF

  - by Patrick Liekhus

  So in my previous posts I showed you how I used EDMX to quickly build my business objects within XPO and XAF.  But how do you test whether your business objects are actually doing what you want and verify that your business logic is correct?  Well I was reading my monthly MSDN magazine last last year and came across an article about using SpecFlow and WatiN to build BDD tests.  So why not use these same techniques to write SpecFlow style scripts and have them generate EasyTest scripts for use with XAF.  Let me outline and show a few things below.  I plan on releasing this code in a short while, I just wanted to preview what I was thinking. Before we begin… First, if you have not read the article in MSDN, here is the link to the article that I found my inspiration.  It covers the overview of BDD vs. TDD, how to write some of the SpecFlow syntax and how use the “Steps” logic to create your own tests. Second, if you have not heard of EasyTest from DevExpress I strongly recommend you review it here.  It basically takes the power of XAF and the beauty of your application and allows you to create text based files to execute automated commands within your application. Why would we do this?  Because as you will see below, the cucumber syntax is easier for business analysts to interpret and digest the business rules from.  You can find most of the information you will need on Cucumber syntax within The Secret Ninja Cucumber Scrolls located here.  The basics of the syntax are that Given X When Y Then Z.  For example, Given I am at the login screen When I enter my login credentials Then I expect to see the home screen.  Pretty easy syntax to follow. Finally, we will need to download and install SpecFlow.  You can find it on their website here.  Once you have this installed then let’s write our first test. Let’s get started… So where to start.  Create a new testing project within your solution.  I typically call this with a similar naming convention as used by XAF, my project name .FunctionalTests (i.e.  AlbumManager.FunctionalTests).  Remove the basic test that is created for you.  We will not use the default test but rather create our own SpecFlow “Feature” files.  Add a new item to your project and select the SpecFlow Feature file under C#.  Name your feature file as you do your class files after the test they are performing. Now you can crack open your new feature file and write the actual test.  Make sure to have your Ninja Scrolls from above as it provides valuable resources on how to write your test syntax.  In this test below you can see how I defined the documentation in the Feature section.  This is strictly for our purposes of readability and do not effect the test.  The next section is the Scenario Outline which is considered a test template.  You can see the brackets <> around the fields that will be filled in for each test.  So in the example below you can see that Given I am starting a new test and the application is open.  This means I want a new EasyTest file and the windows application generated by XAF is open.  Next When I am at the Albums screen tells XAF to navigate to the Albums list view.  And I click the New:Album button, tells XAF to click the new button on the list grid.  And I enter the following information tells XAF which fields to complete with the mapped values.  And I click the Save and Close button causes the record to be saved and the detail form to be closed.  Then I verify results tests the input data against what is visible in the grid to ensure that your record was created. The Scenarios section gives each test a unique name and then fills in the values for each test.  This way you can use the same test to make multiple passes with different data. Almost there.  Now we must save the feature file and the BDD tests will be written using standard unit test syntax.  This is all handled for you by SpecFlow so just save the file.  What you will see in your Test List Editor is a unit test for each of the above scenarios you just built. You can now use standard unit testing frameworks to execute the test as you desire.  As you would expect then, these BDD SpecFlow tests can be automated into your build process to ensure that your business requirements are satisfied each and every time. How does it work? What we have done is to intercept the testing logic at runtime to interpret the SpecFlow syntax into EasyTest syntax.  This is the basic StepDefinitions that we are working on now.  We expect to put these on CodePlex within the next few days.  You can always override and make your own rules as you see fit for your project.  Follow the MSDN magazine above to start your own.  You can see part of our implementation below. As you can gather from the MSDN article and the code sample below, we have created our own common rules to build the above syntax. The code implementation for these rules basically saves your information from the feature file into an EasyTest file format.  It then executes the EasyTest file and parses the XML results of the test.  If the test succeeds the test is passed.  If the test fails, the EasyTest failure message is logged and the screen shot (as captured by EasyTest) is saved for your review. Again we are working on getting this code ready for mass consumption, but at this time it is not ready.  We will post another message when it is ready with all details about usage and setup. Thanks

  Read the article

• Remove box2d bodies after collision deduction android?

  - by jubin

  Can any one explain me how to destroy box2d body when collide i have tried but my application crashed.First i have checked al collisions then add all the bodies in array who i want to destroy.I am trying to learning this tutorial My all the bodies are falling i want these bodies should destroy when these bodies will collide my actor monkey but when it collide it destroy but my aplication crashed.I have googled and from google i got the application crash reasons we should not destroy body in step funtion but i am removing body in the last of tick method. could any one help me or provide me code aur check my code why i am getting this prblem or how can i destroy box2d bodies. This is my code what i am doing. Please could any one check my code and tell me what is i am doing wrong for removing bodies. The code is for multiple box2d objects falling on my actor monkey it should be destroy when it will fall on the monkey.It is destroing but my application crahes. static class Box2DLayer extends CCLayer { protected static final float PTM_RATIO = 32.0f; protected static final float WALK_FACTOR = 3.0f; protected static final float MAX_WALK_IMPULSE = 0.2f; protected static final float ANIM_SPEED = 0.3f; int isLeft=0; String dir=""; int x =0; float direction; CCColorLayer objectHint; // protected static final float PTM_RATIO = 32.0f; protected World _world; protected static Body spriteBody; CGSize winSize = CCDirector.sharedDirector().winSize(); private static int count = 200; protected static Body monkey_body; private static Body bodies; CCSprite monkey; float animDelay; int animPhase; CCSpriteSheet danceSheet = CCSpriteSheet.spriteSheet("phases.png"); CCSprite _block; List<Body> toDestroy = new ArrayList<Body>(); //CCSpriteSheet _spriteSheet; private static MyContactListener _contactListener = new MyContactListener(); public Box2DLayer() { this.setIsAccelerometerEnabled(true); CCSprite bg = CCSprite.sprite("jungle.png"); addChild(bg,0); bg.setAnchorPoint(0,0); bg.setPosition(0,0); CGSize s = CCDirector.sharedDirector().winSize(); // Use scaled width and height so that our boundaries always match the current screen float scaledWidth = s.width/PTM_RATIO; float scaledHeight = s.height/PTM_RATIO; Vector2 gravity = new Vector2(0.0f, -30.0f); boolean doSleep = false; _world = new World(gravity, doSleep); // Create edges around the entire screen // Define the ground body. BodyDef bxGroundBodyDef = new BodyDef(); bxGroundBodyDef.position.set(0.0f, 0.0f); // The body is also added to the world. Body groundBody = _world.createBody(bxGroundBodyDef); // Register our contact listener // Define the ground box shape. PolygonShape groundBox = new PolygonShape(); Vector2 bottomLeft = new Vector2(0f,0f); Vector2 topLeft = new Vector2(0f,scaledHeight); Vector2 topRight = new Vector2(scaledWidth,scaledHeight); Vector2 bottomRight = new Vector2(scaledWidth,0f); // bottom groundBox.setAsEdge(bottomLeft, bottomRight); groundBody.createFixture(groundBox,0); // top groundBox.setAsEdge(topLeft, topRight); groundBody.createFixture(groundBox,0); // left groundBox.setAsEdge(topLeft, bottomLeft); groundBody.createFixture(groundBox,0); // right groundBox.setAsEdge(topRight, bottomRight); groundBody.createFixture(groundBox,0); CCSprite floorbg = CCSprite.sprite("grassbehind.png"); addChild(floorbg,1); floorbg.setAnchorPoint(0,0); floorbg.setPosition(0,0); CCSprite floorfront = CCSprite.sprite("grassfront.png"); floorfront.setTag(2); this.addBoxBodyForSprite(floorfront); addChild(floorfront,3); floorfront.setAnchorPoint(0,0); floorfront.setPosition(0,0); addChild(danceSheet); //CCSprite monkey = CCSprite.sprite(danceSheet, CGRect.make(0, 0, 48, 73)); //addChild(danceSprite); monkey = CCSprite.sprite("arms_up.png"); monkey.setTag(2); monkey.setPosition(200,100); BodyDef spriteBodyDef = new BodyDef(); spriteBodyDef.type = BodyType.DynamicBody; spriteBodyDef.bullet=true; spriteBodyDef.position.set(200 / PTM_RATIO, 300 / PTM_RATIO); monkey_body = _world.createBody(spriteBodyDef); monkey_body.setUserData(monkey); PolygonShape spriteShape = new PolygonShape(); spriteShape.setAsBox(monkey.getContentSize().width/PTM_RATIO/2, monkey.getContentSize().height/PTM_RATIO/2); FixtureDef spriteShapeDef = new FixtureDef(); spriteShapeDef.shape = spriteShape; spriteShapeDef.density = 2.0f; spriteShapeDef.friction = 0.70f; spriteShapeDef.restitution = 0.0f; monkey_body.createFixture(spriteShapeDef); //Vector2 force = new Vector2(10, 10); //monkey_body.applyLinearImpulse(force, spriteBodyDef.position); addChild(monkey,10000); this.schedule(tickCallback); this.schedule(createobjects, 2.0f); objectHint = CCColorLayer.node(ccColor4B.ccc4(255,0,0,128), 200f, 100f); addChild(objectHint, 15000); objectHint.setVisible(false); _world.setContactListener(_contactListener); } private UpdateCallback tickCallback = new UpdateCallback() { public void update(float d) { tick(d); } }; private UpdateCallback createobjects = new UpdateCallback() { public void update(float d) { secondUpdate(d); } }; private void secondUpdate(float dt) { this.addNewSprite(); } public void addBoxBodyForSprite(CCSprite sprite) { BodyDef spriteBodyDef = new BodyDef(); spriteBodyDef.type = BodyType.StaticBody; //spriteBodyDef.bullet=true; spriteBodyDef.position.set(sprite.getPosition().x / PTM_RATIO, sprite.getPosition().y / PTM_RATIO); spriteBody = _world.createBody(spriteBodyDef); spriteBody.setUserData(sprite); Vector2 verts[] = { new Vector2(-11.8f / PTM_RATIO, -24.5f / PTM_RATIO), new Vector2(11.7f / PTM_RATIO, -24.0f / PTM_RATIO), new Vector2(29.2f / PTM_RATIO, -14.0f / PTM_RATIO), new Vector2(28.7f / PTM_RATIO, -0.7f / PTM_RATIO), new Vector2(8.0f / PTM_RATIO, 18.2f / PTM_RATIO), new Vector2(-29.0f / PTM_RATIO, 18.7f / PTM_RATIO), new Vector2(-26.3f / PTM_RATIO, -12.2f / PTM_RATIO) }; PolygonShape spriteShape = new PolygonShape(); spriteShape.set(verts); //spriteShape.setAsBox(sprite.getContentSize().width/PTM_RATIO/2, //sprite.getContentSize().height/PTM_RATIO/2); FixtureDef spriteShapeDef = new FixtureDef(); spriteShapeDef.shape = spriteShape; spriteShapeDef.density = 2.0f; spriteShapeDef.friction = 0.70f; spriteShapeDef.restitution = 0.0f; spriteShapeDef.isSensor=true; spriteBody.createFixture(spriteShapeDef); } public void addNewSprite() { count=0; Random rand = new Random(); int Number = rand.nextInt(10); switch(Number) { case 0: _block = CCSprite.sprite("banana.png"); break; case 1: _block = CCSprite.sprite("backpack.png");break; case 2: _block = CCSprite.sprite("statue.png");break; case 3: _block = CCSprite.sprite("pineapple.png");break; case 4: _block = CCSprite.sprite("bananabunch.png");break; case 5: _block = CCSprite.sprite("hat.png");break; case 6: _block = CCSprite.sprite("canteen.png");break; case 7: _block = CCSprite.sprite("banana.png");break; case 8: _block = CCSprite.sprite("statue.png");break; case 9: _block = CCSprite.sprite("hat.png");break; } int padding=20; //_block.setPosition(CGPoint.make(100, 100)); // Determine where to spawn the target along the Y axis CGSize winSize = CCDirector.sharedDirector().displaySize(); int minY = (int)(_block.getContentSize().width / 2.0f); int maxY = (int)(winSize.width - _block.getContentSize().width / 2.0f); int rangeY = maxY - minY; int actualY = rand.nextInt(rangeY) + minY; // Create block and add it to the layer float xOffset = padding+_block.getContentSize().width/2+((_block.getContentSize().width+padding)*count); _block.setPosition(CGPoint.make(actualY, 750)); _block.setTag(1); float w = _block.getContentSize().width; objectHint.setVisible(true); objectHint.changeWidth(w); objectHint.setPosition(actualY-w/2, 460); this.addChild(_block,10000); // Create ball body and shape BodyDef ballBodyDef1 = new BodyDef(); ballBodyDef1.type = BodyType.DynamicBody; ballBodyDef1.position.set(actualY/PTM_RATIO, 480/PTM_RATIO); bodies = _world.createBody(ballBodyDef1); bodies.setUserData(_block); PolygonShape circle1 = new PolygonShape(); Vector2 verts[] = { new Vector2(-11.8f / PTM_RATIO, -24.5f / PTM_RATIO), new Vector2(11.7f / PTM_RATIO, -24.0f / PTM_RATIO), new Vector2(29.2f / PTM_RATIO, -14.0f / PTM_RATIO), new Vector2(28.7f / PTM_RATIO, -0.7f / PTM_RATIO), new Vector2(8.0f / PTM_RATIO, 18.2f / PTM_RATIO), new Vector2(-29.0f / PTM_RATIO, 18.7f / PTM_RATIO), new Vector2(-26.3f / PTM_RATIO, -12.2f / PTM_RATIO) }; circle1.set(verts); FixtureDef ballShapeDef1 = new FixtureDef(); ballShapeDef1.shape = circle1; ballShapeDef1.density = 10.0f; ballShapeDef1.friction = 0.0f; ballShapeDef1.restitution = 0.1f; bodies.createFixture(ballShapeDef1); count++; //Remove(); } @Override public void ccAccelerometerChanged(float accelX, float accelY, float accelZ) { //Apply the directional impulse /*float impulse = monkey_body.getMass()*accelY*WALK_FACTOR; Vector2 force = new Vector2(impulse, 0); monkey_body.applyLinearImpulse(force, monkey_body.getWorldCenter());*/ walk(accelY); //Remove(); } private void walk(float accelY) { // TODO Auto-generated method stub direction = accelY; } private void Remove() { for (Iterator<MyContact> it1 = _contactListener.mContacts.iterator(); it1.hasNext();) { MyContact contact = it1.next(); Body bodyA = contact.fixtureA.getBody(); Body bodyB = contact.fixtureB.getBody(); // See if there's any user data attached to the Box2D body // There should be, since we set it in addBoxBodyForSprite if (bodyA.getUserData() != null && bodyB.getUserData() != null) { CCSprite spriteA = (CCSprite) bodyA.getUserData(); CCSprite spriteB = (CCSprite) bodyB.getUserData(); // Is sprite A a cat and sprite B a car? If so, push the cat // on a list to be destroyed... if (spriteA.getTag() == 1 && spriteB.getTag() == 2) { //Log.v("dsfds", "dsfsd"+bodyA); //_world.destroyBody(bodyA); // removeChild(spriteA, true); toDestroy.add(bodyA); } // Is sprite A a car and sprite B a cat? If so, push the cat // on a list to be destroyed... else if (spriteA.getTag() == 2 && spriteB.getTag() == 1) { //Log.v("dsfds", "dsfsd"+bodyB); toDestroy.add(bodyB); } } } // Loop through all of the box2d bodies we want to destroy... for (Iterator<Body> it1 = toDestroy.iterator(); it1.hasNext();) { Body body = it1.next(); // See if there's any user data attached to the Box2D body // There should be, since we set it in addBoxBodyForSprite if (body.getUserData() != null) { // We know that the user data is a sprite since we set // it that way, so cast it... CCSprite sprite = (CCSprite) body.getUserData(); // Remove the sprite from the scene _world.destroyBody(body); removeChild(sprite, true); } // Destroy the Box2D body as well // _contactListener.mContacts.remove(0); } } public synchronized void tick(float delta) { synchronized (_world) { _world.step(delta, 8, 3); //_world.clearForces(); //addNewSprite(); } CCAnimation danceAnimation = CCAnimation.animation("dance", 1.0f); // Iterate over the bodies in the physics world Iterator<Body> it = _world.getBodies(); while(it.hasNext()) { Body b = it.next(); Object userData = b.getUserData(); if (userData != null && userData instanceof CCSprite) { //Synchronize the Sprites position and rotation with the corresponding body CCSprite sprite = (CCSprite)userData; if(sprite.getTag()==1) { //b.applyLinearImpulse(force, pos); sprite.setPosition(b.getPosition().x * PTM_RATIO, b.getPosition().y * PTM_RATIO); sprite.setRotation(-1.0f * ccMacros.CC_RADIANS_TO_DEGREES(b.getAngle())); } else { //Apply the directional impulse float impulse = monkey_body.getMass()*direction*WALK_FACTOR; Vector2 force = new Vector2(impulse, 0); b.applyLinearImpulse(force, b.getWorldCenter()); sprite.setPosition(b.getPosition().x * PTM_RATIO, b.getPosition().y * PTM_RATIO); animDelay -= 1.0f/60.0f; if(animDelay <= 0) { animDelay = ANIM_SPEED; animPhase++; if(animPhase > 2) { animPhase = 1; } } if(direction < 0 ) { isLeft=1; } else { isLeft=0; } if(isLeft==1) { dir = "left"; } else { dir = "right"; } float standingLimit = (float) 0.1f; float vX = monkey_body.getLinearVelocity().x; if((vX > -standingLimit)&& (vX < standingLimit)) { // Log.v("sasd", "standing"); } else { } } } } Remove(); } } Sorry for my english. Thanks in advance.

  Read the article

• I can't install Ubuntu 12.04.1 on iMac G5

  - by user89004

  So, I have this iMac G5 that doesn't have iSight, only a small light sensor I think undernieth, machine model 8.2. I tried burning a Ubuntu 12.04.1 PowerPC 64bit .iso to a cd but the computer just won't boot it, I don't know why. Next I tried with a USB but it wouldn't let me boot that either, I created the usb on my dad's win7 laptop as the process was way easier than on freakin Mac or Ubuntu (no command typing AT ALL on windows) I'm able to get into openfirmware and type boot usb and it does show some weird writing that scrolls so fast I can't see anything and then it just gives me this huge no sign like a stop sign and freezez. The sign is grey and the line in the middle is tilted towards the left. An other issue I'm having with hdiutil is that I can't convert the stupid .iso I just downloaded into a .img because the file keeps on dissapearing right when it's done converting it. I used the syntax from Ubuntu support how to create a bootable usb drive under Mac OS X. I even didn't include the 2 stupid ~ that are shown in the syntax that are completly worthless, God only know why they put them there, and I even tried running the whole thing as root with sudo su before the command. The funny thing is that if I convert something smaller it works. The command I was using is hdiutil convert -format UDRW -o /path/to/target.img /path/to/ubuntu.iso I even tried hdiutil convert /path/to/ubuntu.iso -format UDRW -o /path/to/target.img but the same thing happens, the dummy .img.dmg file dissapears when the conversion is done no matter where I set the output file to go. I have tried several different folders, the same thing happens with all of them. I also tried burning a Ubuntu mini iso on a cd, can't remember if it was 11.10 or 12.10 but even thoguh holding c when the iMac boots up does show me the cd and I can boot from it, I get this weird error upon hitting install, it says something like invalid memory access, release keys and error strings I can't read. I don't have any original DVDs from this iMac and can't run hardware diagnostics. WHatever option I try at the command prompt from the mini ubuntu cd I get the same result, error code and openfirmware backdrop that's frozen. I noticed that the pen drive I created on my dads Win7 laptop is formated with MS-DOS but I can still mount it no problem, so it shouldn't have a problem booting it, right? I used the advice on ubuntu.com to make it, from here. Also, my partition is HFS+ so I can't use it as a hard drive and boot from it. I don' have 2 partitions either, just one HDD, one partition. Please help!!!

  Read the article

• BI&EPM in Focus December 2012

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Share with your customers: October Edition of Business Analytics Customer Newsletter (link) Oracle OpenWorld Presentation pdf's available for download (link) OOW Mark Hurd Recap: Business Analytics at Oracle OpenWorld (video | blog) Register your customers for Oracle Days 2012 (link | video) BI & EPM Business Analytics Advisor Webcasts on My.Oracle.Support - Current Schedule and Archived (link) Customers Wüstenrot Efficiently Generates Reports and Analyzes Data with Enterprise Reporting Solution Empresas Públicas Medellin Gathers Data for Annual, Financial Projections 70% Faster ICON Improves Month-End Reporting Significantly Using a Single Source for Timely Consistent Business Intelligence, Reduces Reliance on Spreadsheets  Gilead Sciences, a science-led company backed by business-led IT, uses Oracle solutions to simplify business processes and establish a foundation for continued growth Dell Enhances the Customer Experience with Oracle’s RTD (video) Link to Complete Archive Enterprise Performance Management eBook: Transforming Enterprise Business Planning (link) Blog: Why CFO's should care about Big Data (link) Oracle Hyperion Project Financial Planning - New Projects Feature Release 11.1.2.2 Video Feature Overview. Now Available with many other Hyperion overviews on the YouTube Oracle EPM Channel (link) Available Patch Sets and Patch Set Updates for Oracle Hyperion Enterprise Performance Management Products on My.Oracle.Support (link) Hyperion Disclosure Management supplementary materials provides a set of guides for Disclosure Management and Taxonomy Designer users, including best practices guidelines, a full Disclosure Management sample report, a webinar series, and other guiding materials on My.Oracle.Support (link) See the selection of EPM Customer Videos at MediaNetwork (Hyperion) Business Intelligence Webcast Replay: Big Data, Bright Future, featuring Andrew McAfee (link) Webinar series and guides on Getting Started With Hyperion Interactive Reporting Translation Workbench, a tool that accelerates metadata conversion from IR to Oracle BI Enterprise Edition (OBIEE) on My.Oracle.Support (link) See the selection of BI Customer Videos at MediaNetwork (BI) and for (Exalytics) and (Endeca) ORACLE TEAM USA Analytics Dashboard demo - Now Available (link)

  Read the article

• D2K to OA Framework Transition

  - by PRajkumar

  What is the difference between D2K form and OA Framework? It is a very innocent but important question for someone that desires to make transition from D2K to OA Framework. I hope you have already read and implemented OA Framework Getting Started. I will re-visit my own experience of implementing HelloWorld program in "OA Framework". When I implemented HelloWorld a year ago, I had no clue as to what I was doing & why I was doing those steps. I merely copied the steps from Oracle Tutorial without understanding them. Hence in this blog, I will try to explain in simple manner the meaning of OA Framework HelloWorld Program and compare the steps to D2K form [where possible]. To keep things simple, only basics will be discussed. Following key Steps were needed for HelloWorld Step 1 Create a new Workspace and a new Project as dictated by Oracle's tutorial. When defining project, you will specify a default package, which in this case was oracle.apps.ak.hello This means the following: - ak is the short name of the Application in Oracle           [means fnd_applications.short_name] hello is the name of your project Step 2 Next, you will create a OA Page within hello project Think OA Page as the fmx file itself in D2K. I am saying so because this page gets attached to the form function. This page will be created within hello project, hence the package name oracle.apps.ak.hello.webui Note the webui, it is a convention to have page in webui, means this page represents the Web User Interface You will assign the default AM [OAApplicationModule]. Think of AM "Connection Manager" and "Transaction State Manager" for your page          I can't co-relate this to anything in D2k, as there is no concept of Connection Pooling and that D2k is not stateless. Reason being that as soon as you kick off a D2K Form, it connects to a single session of Oracle and sticks to that single Oracle database session. So is not the case in OAF, hence AM is needed. Step 3 You create Region within the Page. ·         Region is what will store your fields. Text input fields will be of type messageTextInput. Think of Canvas in D2K. You can have nested regions. Stacked Canvas in D2K comes the closest to this component of OA Framework Step 4 Add a button to one of the nested regions The itemStyle should be submitButton, in case you want the page to be submitted when this button is clicked There is no WHEN-BUTTON-PRESSED trigger in OAF. In Framework, you will add a controller java code to handle events like Form Submit button clicks. JDeveloper generates the default code for you. Primarily two functions [should I call methods] will be created processRequest [for UI Rendering Handling] and processFormRequest          Think of processRequest as WHEN-NEW-FORM-INSTANCE, though processRequest is very restrictive. Note What is the difference between processRequest and processFormRequest? These two methods are available in the Default Controller class that gets created. processFormRequest This method is commonly used to react/respond to the event that has taken place, for example click of a button. Some examples are if(oapagecontext.getParameter("Cancel") != null) (Do your processing for Cancellation/ Rollback) if(oapagecontext.getParameter("Submit") != null) (Do your validations and commit here) if(oapagecontext.getParameter("Update") != null) (Do your validations and commit here) In the above three examples, you could be calling oapagecontext.forwardImmediately to re-direct the page navigation to some other page if needed. processRequest In this method, usually page rendering related code is written. Effectively, each GUI component is a bean that gets initialised during processRequest. Those who are familiar with D2K forms, something like pre-query may be written in this method. Step 5 In the controller to access the value in field "HelloName" the command is String userContent = pageContext.getParameter("HelloName"); In D2k, we used :block.field. In OAFramework, at submission of page, all the field values get passed into to OAPageContext object. Use getParameter to access the field value To set the value of the field, use OAMessageTextInputBean field HelloName = (OAMessageTextInputBean)webBean.findChildRecursive("HelloName"); fieldHelloName.setText(pageContext,"Setting the default value" ); Note when setting field value in controller: Note 1. Do not set the value in processFormRequest Note 2. If the field comes from View Object, then do not use setText in controller Note 3. For control fields [that are not based on View Objects], you can use setText to assign values in processRequest method Lets take some notes to expand beyond the HelloWorld Project Note 1 In D2K-forms we sort of created a Window, attached to Canvas, and then fields within that Canvas. However in OA Framework, think of Page being fmx/Window, think of Region being a Canvas, and fields being within Regions. This is not a formal/accurate understanding of analogy between D2k and Framework, but is close to being logical. Note 2 In D2k, your Forms fmb file was compiled to fmx. It was fmx file that was deployed on mid-tier. In case of OAF, your OA Page is nothing but a XML file. We call this MDS [meta data]. Whatever name you give to "Page" in OAF, an XML file of the same name gets created. This xml file must then be loaded into database by using XML Importer command. Note 3 Apart from MDS XML file, almost everything else is merely deployed to your mid-tier. Usually this is underneath $JAVA_TOP/oracle/apps/../.. All java files will go underneath java top/oracle/apps/../.. etc. Note 4 When building tutorial, ignore the steps for setting "Attribute Sets". These are not mandatory. Oracle might just have developed their tutorials without including these. Think of these like Visual Attributes of D2K forms Note 5 Controller is where you will write any java code in OA Framework. You can create a Controller per Page or have a different Controller for each of the Regions with the same Page. Note 6 In the method processFormRequest of the Controller, you can access the values of the page by using notation pageContext.getParameter("<fieldname here>"). This method processFormRequest is executed when the OAF Screen/Page is submitted by click of a button. Note 7 Inside the controller, all the Database Related interactions for example interaction with View Objects happen via Application Module. But why so? Because Application Module Manages the transaction state of the Application. OAApplicationModuleImpl oaapplicationmoduleimpl = OAApplicationModuleImpl)oapagecontext.getApplicationModule(oawebbean); OADBTransaction oadbtransaction = OADBTransaction)oaapplicationmoduleimpl.getDBTransaction(); Note 8 In D2K, we have control block or a block based on database view. Similarly, in OA Framework, if the field does not have view Object attached, then it is like a control field. Hence in HelloWorld example, field HelloName is a control field [in D2K terminology]. A view Object can either be based on a view/table, synonym or on a SQL statement. Note 9 I wish to access the fields in multi record block that is based on view Object. Can I do this in Controller? Sure you can. To traverse through those records, do the below ·         Get the reference to the View Object using (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("VO Name Here") ·         Loop through the records in View Objects using count returned from oaviewobject.getFetchedRowCount() ·         For each record, fetch the value of the fields within the loop as oracle.jbo.Row row = oaviewobject.getRowAtRangeIndex(loop index here); (String)row.getAttribute("Column name of VO here ");

  Read the article

• How to maintain encapsulation with composition in C++?

  - by iFreilicht

  I am designing a class Master that is composed from multiple other classes, A, Base, C and D. These four classes have absolutely no use outside of Master and are meant to split up its functionality into manageable and logically divided packages. They also provide extensible functionality as in the case of Base, which can be inherited from by clients. But, how do I maintain encapsulation of Master with this design? So far, I've got two approaches, which are both far from perfect: 1. Replicate all accessors: Just write accessor-methods for all accessor-methods of all classes that Master is composed of. This leads to perfect encapsulation, because no implementation detail of Master is visible, but is extremely tedious and makes the class definition monstrous, which is exactly what the composition should prevent. Also, adding functionality to one of the composees (is that even a word?) would require to re-write all those methods in Master. An additional problem is that inheritors of Base could only alter, but not add functionality. 2. Use non-assignable, non-copyable member-accessors: Having a class accessor<T> that can not be copied, moved or assigned to, but overrides the operator-> to access an underlying shared_ptr, so that calls like Master->A()->niceFunction(); are made possible. My problem with this is that it kind of breaks encapsulation as I would now be unable to change my implementation of Master to use a different class for the functionality of niceFunction(). Still, it is the closest I've gotten without using the ugly first approach. It also fixes the inheritance issue quite nicely. A small side question would be if such a class already existed in std or boost. EDIT: Wall of code I will now post the code of the header files of the classes discussed. It may be a bit hard to understand, but I'll give my best in explaining all of it. 1. GameTree.h The foundation of it all. This basically is a doubly-linked tree, holding GameObject-instances, which we'll later get to. It also has it's own custom iterator GTIterator, but I left that out for brevity. WResult is an enum with the values SUCCESS and FAILED, but it's not really important. class GameTree { public: //Static methods for the root. Only one root is allowed to exist at a time! static void ConstructRoot(seed_type seed, unsigned int depth); inline static bool rootExists(){ return static_cast<bool>(rootObject_); } inline static weak_ptr<GameTree> root(){ return rootObject_; } //delta is in ms, this is used for velocity, collision and such void tick(unsigned int delta); //Interaction with the tree inline weak_ptr<GameTree> parent() const { return parent_; } inline unsigned int numChildren() const{ return static_cast<unsigned int>(children_.size()); } weak_ptr<GameTree> getChild(unsigned int index) const; template<typename GOType> weak_ptr<GameTree> addChild(seed_type seed, unsigned int depth = 9001){ GOType object{ new GOType(seed) }; return addChildObject(unique_ptr<GameTree>(new GameTree(std::move(object), depth))); } WResult moveTo(weak_ptr<GameTree> newParent); WResult erase(); //Iterators for for( : ) loop GTIterator& begin(){ return *(beginIter_ = std::move(make_unique<GTIterator>(children_.begin()))); } GTIterator& end(){ return *(endIter_ = std::move(make_unique<GTIterator>(children_.end()))); } //unloading should be used when objects are far away WResult unloadChildren(unsigned int newDepth = 0); WResult loadChildren(unsigned int newDepth = 1); inline const RenderObject& renderObject() const{ return gameObject_->renderObject(); } //Getter for the underlying GameObject (I have not tested the template version) weak_ptr<GameObject> gameObject(){ return gameObject_; } template<typename GOType> weak_ptr<GOType> gameObject(){ return dynamic_cast<weak_ptr<GOType>>(gameObject_); } weak_ptr<PhysicsObject> physicsObject() { return gameObject_->physicsObject(); } private: GameTree(const GameTree&); //copying is only allowed internally GameTree(shared_ptr<GameObject> object, unsigned int depth = 9001); //pointer to root static shared_ptr<GameTree> rootObject_; //internal management of a child weak_ptr<GameTree> addChildObject(shared_ptr<GameTree>); WResult removeChild(unsigned int index); //private members shared_ptr<GameObject> gameObject_; shared_ptr<GTIterator> beginIter_; shared_ptr<GTIterator> endIter_; //tree stuff vector<shared_ptr<GameTree>> children_; weak_ptr<GameTree> parent_; unsigned int selfIndex_; //used for deletion, this isn't necessary void initChildren(unsigned int depth); //constructs children }; 2. GameObject.h This is a bit hard to grasp, but GameObject basically works like this: When constructing a GameObject, you construct its basic attributes and a CResult-instance, which contains a vector<unique_ptr<Construction>>. The Construction-struct contains all information that is needed to construct a GameObject, which is a seed and a function-object that is applied at construction by a factory. This enables dynamic loading and unloading of GameObjects as done by GameTree. It also means that you have to define that factory if you inherit GameObject. This inheritance is also the reason why GameTree has a template-function gameObject<GOType>. GameObject can contain a RenderObject and a PhysicsObject, which we'll later get to. Anyway, here's the code. class GameObject; typedef unsigned long seed_type; //this declaration magic means that all GameObjectFactorys inherit from GameObjectFactory<GameObject> template<typename GOType> struct GameObjectFactory; template<> struct GameObjectFactory<GameObject>{ virtual unique_ptr<GameObject> construct(seed_type seed) const = 0; }; template<typename GOType> struct GameObjectFactory : GameObjectFactory<GameObject>{ GameObjectFactory() : GameObjectFactory<GameObject>(){} unique_ptr<GameObject> construct(seed_type seed) const{ return unique_ptr<GOType>(new GOType(seed)); } }; //same as with the factories. this is important for storing them in vectors template<typename GOType> struct Construction; template<> struct Construction<GameObject>{ virtual unique_ptr<GameObject> construct() const = 0; }; template<typename GOType> struct Construction : Construction<GameObject>{ Construction(seed_type seed, function<void(GOType*)> func = [](GOType* null){}) : Construction<GameObject>(), seed_(seed), func_(func) {} unique_ptr<GameObject> construct() const{ unique_ptr<GameObject> gameObject{ GOType::factory.construct(seed_) }; func_(dynamic_cast<GOType*>(gameObject.get())); return std::move(gameObject); } seed_type seed_; function<void(GOType*)> func_; }; typedef struct CResult { CResult() : constructions{} {} CResult(CResult && o) : constructions(std::move(o.constructions)) {} CResult& operator= (CResult& other){ if (this != &other){ for (unique_ptr<Construction<GameObject>>& child : other.constructions){ constructions.push_back(std::move(child)); } } return *this; } template<typename GOType> void push_back(seed_type seed, function<void(GOType*)> func = [](GOType* null){}){ constructions.push_back(make_unique<Construction<GOType>>(seed, func)); } vector<unique_ptr<Construction<GameObject>>> constructions; } CResult; //finally, the GameObject class GameObject { public: GameObject(seed_type seed); GameObject(const GameObject&); virtual void tick(unsigned int delta); inline Matrix4f trafoMatrix(){ return physicsObject_->transformationMatrix(); } //getter inline seed_type seed() const{ return seed_; } inline CResult& properties(){ return properties_; } inline const RenderObject& renderObject() const{ return *renderObject_; } inline weak_ptr<PhysicsObject> physicsObject() { return physicsObject_; } protected: virtual CResult construct_(seed_type seed) = 0; CResult properties_; shared_ptr<RenderObject> renderObject_; shared_ptr<PhysicsObject> physicsObject_; seed_type seed_; }; 3. PhysicsObject That's a bit easier. It is responsible for position, velocity and acceleration. It will also handle collisions in the future. It contains three Transformation objects, two of which are optional. I'm not going to include the accessors on the PhysicsObject class because I tried my first approach on it and it's just pure madness (way over 30 functions). Also missing: the named constructors that construct PhysicsObjects with different behaviour. class Transformation{ Vector3f translation_; Vector3f rotation_; Vector3f scaling_; public: Transformation() : translation_{ 0, 0, 0 }, rotation_{ 0, 0, 0 }, scaling_{ 1, 1, 1 } {}; Transformation(Vector3f translation, Vector3f rotation, Vector3f scaling); inline Vector3f translation(){ return translation_; } inline void translation(float x, float y, float z){ translation(Vector3f(x, y, z)); } inline void translation(Vector3f newTranslation){ translation_ = newTranslation; } inline void translate(float x, float y, float z){ translate(Vector3f(x, y, z)); } inline void translate(Vector3f summand){ translation_ += summand; } inline Vector3f rotation(){ return rotation_; } inline void rotation(float pitch, float yaw, float roll){ rotation(Vector3f(pitch, yaw, roll)); } inline void rotation(Vector3f newRotation){ rotation_ = newRotation; } inline void rotate(float pitch, float yaw, float roll){ rotate(Vector3f(pitch, yaw, roll)); } inline void rotate(Vector3f summand){ rotation_ += summand; } inline Vector3f scaling(){ return scaling_; } inline void scaling(float x, float y, float z){ scaling(Vector3f(x, y, z)); } inline void scaling(Vector3f newScaling){ scaling_ = newScaling; } inline void scale(float x, float y, float z){ scale(Vector3f(x, y, z)); } void scale(Vector3f factor){ scaling_(0) *= factor(0); scaling_(1) *= factor(1); scaling_(2) *= factor(2); } Matrix4f matrix(){ return WMatrix::Translation(translation_) * WMatrix::Rotation(rotation_) * WMatrix::Scale(scaling_); } }; class PhysicsObject; typedef void tickFunction(PhysicsObject& self, unsigned int delta); class PhysicsObject{ PhysicsObject(const Transformation& trafo) : transformation_(trafo), transformationVelocity_(nullptr), transformationAcceleration_(nullptr), tick_(nullptr) {} PhysicsObject(PhysicsObject&& other) : transformation_(other.transformation_), transformationVelocity_(std::move(other.transformationVelocity_)), transformationAcceleration_(std::move(other.transformationAcceleration_)), tick_(other.tick_) {} Transformation transformation_; unique_ptr<Transformation> transformationVelocity_; unique_ptr<Transformation> transformationAcceleration_; tickFunction* tick_; public: void tick(unsigned int delta){ tick_ ? tick_(*this, delta) : 0; } inline Matrix4f transformationMatrix(){ return transformation_.matrix(); } } 4. RenderObject RenderObject is a base class for different types of things that could be rendered, i.e. Meshes, Light Sources or Sprites. DISCLAIMER: I did not write this code, I'm working on this project with someone else. class RenderObject { public: RenderObject(float renderDistance); virtual ~RenderObject(); float renderDistance() const { return renderDistance_; } void setRenderDistance(float rD) { renderDistance_ = rD; } protected: float renderDistance_; }; struct NullRenderObject : public RenderObject{ NullRenderObject() : RenderObject(0.f){}; }; class Light : public RenderObject{ public: Light() : RenderObject(30.f){}; }; class Mesh : public RenderObject{ public: Mesh(unsigned int seed) : RenderObject(20.f) { meshID_ = 0; textureID_ = 0; if (seed == 1) meshID_ = Model::getMeshID("EM-208_heavy"); else meshID_ = Model::getMeshID("cube"); }; unsigned int getMeshID() const { return meshID_; } unsigned int getTextureID() const { return textureID_; } private: unsigned int meshID_; unsigned int textureID_; }; I guess this shows my issue quite nicely: You see a few accessors in GameObject which return weak_ptrs to access members of members, but that is not really what I want. Also please keep in mind that this is NOT, by any means, finished or production code! It is merely a prototype and there may be inconsistencies, unnecessary public parts of classes and such.

  Read the article

• 3D terrain map with Hexagon Grids (XNA)

  - by Rob

  I'm working on a hobby project (I'm a web/backend developer by day) and I want to create a 3D Tile (terrain) engine. I'm using XNA, but I can use MonoGame, OpenGL, or straight DirectX, so the answer does not have to be XNA specific. I'm more looking for some high level advice on how to approach this problem. I know about creating height maps and such, there are thousands of references out there on the net for that, this is a bit more specific. I'm more concerned with is the approach to get a 3D hexagon tile grid out of my terrain (since the terrain, and all 3d objects, are basically triangles). The first approach I thought about is to basically draw the triangles on the screen in the following order (blue numbers) to give me the triangles for terrain (black triangles) and then make hexes out of the triangles (red hex). http://screencast.com/t/ebrH2g5V This approach seems complicated to me since i'm basically having to draw 4 different types of triangles. The next approach I thought of was to use the existing triangles like I did for a square grid and get my hexes from 6 triangles as follows http://screencast.com/t/w9b7qKzVJtb8 This seems like the easier approach to me since there are only 2 types of triangles (i would have to play with the heights and widths to get a "perfect" hexagon, but the idea is the same. So I'm looking for: 1) Any suggestions on which approach I should take, and why. 2) How would I translate mouse position to a hexagon grid position (especially when moving the camera around), for example in the second image if the mouse pointer were the green circle, how would I determine to highlight that hexagon and then translating that into grid coordinates (assuming it is 0,0)? 3) Any references, articles, books, etc - to get me going in the right direction. Note: I've done hex grid's and mouse-grid coordinate conversion before in 2d. looking for some pointers on how to do the same in 3d. The result I would like to achieve is something similar to the following: http :// www. youtube .com / watch?v=Ri92YkyC3fw (sorry about the youtube link, but it will only let me post 2 links in this post... same rep problem i mention below...) Thanks for any help! P.S. Sorry for not posting the images inline, I apparently don't have enough rep on this stack exchange site.

  Read the article

• Business Insight, IT Execution: 9 Project Management Tips

  - by Sylvie MacKenzie, PMP

  Excerpt from Profit Magazine - by David Rosenbaum When Marcos Baccetto was first asked to be the business-side project lead on Eaton Corporation’s Vehicle Group South America (VGSA) Oracle project, the operations services manager responsible for running manufacturing was, he confesses, “a little afraid” because of his lack of IT experience. Today, Baccetto calls the project “a fantastic experience,” and he is a true believer in the benefits of a close relationship between IT implementers and their line-of-business peers. Through his partnership with Jesiele Lima, then VGSA IT manager, Baccetto and Eaton’s South American operations team came to understand several important principles of business and IT. Here he shares nine tips managers should consider when working on an enterprise technology project. 1. Make it a business project, not an IT project. All levels of functional management must have ownership, responsibility, and accountability for the success of the implementation. 2. Share responsibility. Business owners should sign off on tests and data conversion. 3. Clean your data. Dedicating a team to improve core data quality prior to project launch can be a significant time-saver. 4. Select resources properly. Have functional people who can translate business needs to IT and can influence organizational change. 5. Manage scope. Follow project management methodologies and disciplines. 6. Adopt common processes, global solutions. Avoid customized, local solutions. The big-picture business goals can get lost in the details. 7. Implement processes prior to the go-live date. Change management can be key. Keep the workforce informed and train users in advance. 8. Define metrics milestones. Assume there will be a crisis during deployment. Having baseline metrics to compare against will help implementers keep their cool—and the project moving forward. 9. The sponsor’s commitment is critical. It is needed to support the truly difficult decisions.

  Read the article

• SQL Server Developer Tools &ndash; Codename Juneau vs. Red-Gate SQL Source Control

  - by Ajarn Mark Caldwell

  So how do the new SQL Server Developer Tools (previously code-named Juneau) stack up against SQL Source Control?  Read on to find out. At the PASS Community Summit a couple of weeks ago, it was announced that the previously code-named Juneau software would be released under the name of SQL Server Developer Tools with the release of SQL Server 2012.  This replacement for Database Projects in Visual Studio (also known in a former life as Data Dude) has some great new features.  I won’t attempt to describe them all here, but I will applaud Microsoft for making major improvements.  One of my favorite changes is the way database elements are broken down.  Previously every little thing was in its own file.  For example, indexes were each in their own file.  I always hated that.  Now, SSDT uses a pattern similar to Red-Gate’s and puts the indexes and keys into the same file as the overall table definition. Of course there are really cool features to keep your database model in sync with the actual source scripts, and the rename refactoring feature is now touted as being more than just a search and replace, but rather a “semantic-aware” search and replace.  Funny, it reminds me of SQL Prompt’s Smart Rename feature.  But I’m not writing this just to criticize Microsoft and argue that they are late to the party with this feature set.  Instead, I do see it as a viable alternative for folks who want all of their source code to be version controlled, but there are a couple of key trade-offs that you need to know about when you choose which tool set to use. First, the basics Both tool sets integrate with a wide variety of source control systems including the most popular: Subversion, GIT, Vault, and Team Foundation Server.  Both tools have integrated functionality to produce objects to upgrade your target database when you are ready (DACPACs in SSDT, integration with SQL Compare for SQL Source Control).  If you regularly live in Visual Studio or the Business Intelligence Development Studio (BIDS) then SSDT will likely be comfortable for you.  Like BIDS, SSDT is a Visual Studio Project Type that comes with SQL Server, and if you don’t already have Visual Studio installed, it will install the shell for you.  If you already have Visual Studio 2010 installed, then it will just add this as an available project type.  On the other hand, if you regularly live in SQL Server Management Studio (SSMS) then you will really enjoy the SQL Source Control integration from within SSMS.  Both tool sets store their database model in script files.  In SSDT, these are on your file system like other source files; in SQL Source Control, these are stored in the folder structure in your source control system, and you can always GET them to your file system if you want to browse them directly. For me, the key differentiating factors are 1) a single, unified check-in, and 2) migration scripts.  How you value those two features will likely make your decision for you. Unified Check-In If you do a continuous-integration (CI) style of development that triggers an automated build with unit testing on every check-in of source code, and you use Visual Studio for the rest of your development, then you will want to really consider SSDT.  Because it is just another project in Visual Studio, it can be added to your existing Solution, and you can then do a complete, or unified single check-in of all changes whether they are application or database changes.  This is simply not possible with SQL Source Control because it is in a different development tool (SSMS instead of Visual Studio) and there is no way to do one unified check-in between the two.  You CAN do really fast back-to-back check-ins, but there is the possibility that the automated build that is triggered from the first check-in will cause your unit tests to fail and the CI tool to report that you broke the build.  Of course, the automated build that is triggered from the second check-in which contains the “other half” of your changes should pass and so the amount of time that the build was broken may be very, very short, but if that is very, very important to you, then SQL Source Control just won’t work; you’ll have to use SSDT. Refactoring and Migrations If you work on a mature system, or on a not-so-mature but also not-so-well-designed system, where you want to refactor the database schema as you go along, but you can’t have data suddenly disappearing from your target system, then you’ll probably want to go with SQL Source Control.  As I wrote previously, there are a number of changes which you can make to your database that the comparison tools (both from Microsoft and Red Gate) simply cannot handle without the possibility (or probability) of data loss.  Currently, SSDT only offers you the ability to inject PRE and POST custom deployment scripts.  There is no way to insert your own script in the middle to override the default behavior of the tool.  In version 3.0 of SQL Source Control (Early Access version now available) you have that ability to create your own custom migration script to take the place of the commands that the tool would have done, and ensure the preservation of your data.  Or, even if the default tool behavior would have worked, but you simply know a better way then you can take control and do things your way instead of theirs. You Decide In the environment I work in, our automated builds are not triggered off of check-ins, but off of the clock (currently once per night) and so there is no point at which the automated build and unit tests will be triggered without having both sides of the development effort already checked-in.  Therefore having a unified check-in, while handy, is not critical for us.  As for migration scripts, these are critically important to us.  We do a lot of new development on systems that have already been in production for years, and it is not uncommon for us to need to do a refactoring of the database.  Because of the maturity of the existing system, that often involves data migrations or other additional SQL tasks that the comparison tools just can’t detect on their own.  Therefore, the ability to create a custom migration script to override the tool’s default behavior is very important to us.  And so, you can see why we will continue to use Red Gate SQL Source Control for the foreseeable future.

  Read the article

• Windows 7 Seems to break SWT Control.print(GC)

  - by GreenKiwi

  A bug has been filed and fixed (super quickly) in SWT: https://bugs.eclipse.org/bugs/show_bug.cgi?id=305294 Just to preface this, my goal here is to print the two images into a canvas so that I can animate the canvas sliding across the screen (think iPhone), sliding the controls themselves was too CPU intensive, so this was a good alternative until I tested it on Win7. I'm open to anything that will help me solve my original problem, it doesn't have to be fixing the problem below. Does anyone know how to get "Control.print(GC)" to work with Windows 7 Aero? I have code that works just fine in Windows XP and in Windows 7, when Aero is disabled, but the command: control.print(GC) causes a non-top control to be effectively erased from the screen. GC gc = new GC(image); try { // As soon as this code is called, calling "layout" on the controls // causes them to disappear. control.print(gc); } finally { gc.dispose(); } I have stacked controls and would like to print the images from the current and next controls such that I can "slide" them off the screen. However, upon printing the non-top control, it is never redrawn again. Here is some example code. (Interesting code bits are at the top and it will require pointing at SWT in order to work.) Thanks for any and all help. As a work around, I'm thinking about swapping controls between prints to see if that helps, but I'd rather not. import org.eclipse.swt.SWT; import org.eclipse.swt.custom.StackLayout; import org.eclipse.swt.events.SelectionAdapter; import org.eclipse.swt.events.SelectionEvent; import org.eclipse.swt.graphics.GC; import org.eclipse.swt.graphics.Image; import org.eclipse.swt.graphics.Point; import org.eclipse.swt.layout.GridData; import org.eclipse.swt.layout.GridLayout; import org.eclipse.swt.widgets.Button; import org.eclipse.swt.widgets.Composite; import org.eclipse.swt.widgets.Control; import org.eclipse.swt.widgets.Display; import org.eclipse.swt.widgets.Label; import org.eclipse.swt.widgets.Shell; public class SWTImagePrintTest { private Composite stack; private StackLayout layout; private Label lblFlip; private Label lblFlop; private boolean flip = true; private Button buttonFlop; private Button buttonPrint; /** * Prints the control into an image * * @param control */ protected void print(Control control) { Image image = new Image(control.getDisplay(), control.getBounds()); GC gc = new GC(image); try { // As soon as this code is called, calling "layout" on the controls // causes them to disappear. control.print(gc); } finally { gc.dispose(); } } /** * Swaps the controls in the stack */ private void flipFlop() { if (flip) { flip = false; layout.topControl = lblFlop; buttonFlop.setText("flop"); stack.layout(); } else { flip = true; layout.topControl = lblFlip; buttonFlop.setText("flip"); stack.layout(); } } private void createContents(Shell shell) { shell.setLayout(new GridLayout(2, true)); stack = new Composite(shell, SWT.NONE); GridData gdStack = new GridData(GridData.FILL_BOTH); gdStack.horizontalSpan = 2; stack.setLayoutData(gdStack); layout = new StackLayout(); stack.setLayout(layout); lblFlip = new Label(stack, SWT.BOLD); lblFlip.setBackground(Display.getCurrent().getSystemColor( SWT.COLOR_CYAN)); lblFlip.setText("FlIp"); lblFlop = new Label(stack, SWT.NONE); lblFlop.setBackground(Display.getCurrent().getSystemColor( SWT.COLOR_BLUE)); lblFlop.setText("fLoP"); layout.topControl = lblFlip; stack.layout(); buttonFlop = new Button(shell, SWT.FLAT); buttonFlop.setText("Flip"); GridData gdFlip = new GridData(); gdFlip.horizontalAlignment = SWT.RIGHT; buttonFlop.setLayoutData(gdFlip); buttonFlop.addSelectionListener(new SelectionAdapter() { @Override public void widgetSelected(SelectionEvent e) { flipFlop(); } }); buttonPrint = new Button(shell, SWT.FLAT); buttonPrint.setText("Print"); GridData gdPrint = new GridData(); gdPrint.horizontalAlignment = SWT.LEFT; buttonPrint.setLayoutData(gdPrint); buttonPrint.addSelectionListener(new SelectionAdapter() { @Override public void widgetSelected(SelectionEvent e) { print(lblFlip); print(lblFlop); } }); } /** * @param args */ public static void main(String[] args) { Shell shell = new Shell(); shell.setText("Slider Test"); shell.setSize(new Point(800, 600)); shell.setLayout(new GridLayout()); SWTImagePrintTest tt = new SWTImagePrintTest(); tt.createContents(shell); shell.open(); Display display = Display.getDefault(); while (shell.isDisposed() == false) { if (display.readAndDispatch() == false) { display.sleep(); } } display.dispose(); } }

  Read the article

• Silverlight/Web Service Serializing Interface for use Client Side

  - by Steve Brouillard

  I have a Silverlight solution that references a third-party web service. This web service generates XML, which is then processed into objects for use in Silverlight binding. At one point we the processing of XML to objects was done client-side, but we ran into performance issues and decided to move this processing to the proxies in the hosting web project to improve performance (which it did). This is obviously a gross over-simplification, but should work. My basic project structure looks like this. Solution Solution.Web - Holds the web page that hosts Silverlight as well as proxies that access web services and processes as required and obviously the references to those web services). Solution.Infrastructure - Holds references to the proxy web services in the .Web project, all genned code from serialized objects from those proxies and code around those objects that need to be client-side. Solution.Book - The particular project that uses the objects in question after processed down into Infrastructure. I've defined the following Interface and Class in the Web project. They represent the type of objects that the XML from the original third-party gets transformed into and since this is the only project in the Silverlight app that is actually server-side, that was the place to define and use them. //Doesn't get much simpler than this. public interface INavigable { string Description { get; set; } } //Very simple class too public class IndexEntry : INavigable { public List<IndexCM> CMItems { get; set; } public string CPTCode { get; set; } public string DefinitionOfAbbreviations { get; set; } public string Description { get; set; } public string EtiologyCode { get; set; } public bool HighScore { get; set; } public IndexToTabularCommandArguments IndexToTabularCommandArgument { get; set; } public bool IsExpanded { get; set; } public string ManifestationCode { get; set; } public string MorphologyCode { get; set; } public List<TextItem> NonEssentialModifiersAndQualifyingText { get; set; } public string OtherItalics { get; set; } public IndexEntry Parent { get; set; } public int Score { get; set; } public string SeeAlsoReference { get; set; } public string SeeReference { get; set; } public List<IndexEntry> SubEntries { get; set; } public int Words { get; set; } } Again; both of these items are defined in the Web project. Notice that IndexEntry implments INavigable. When the code for IndexEntry is auto-genned in the Infrastructure project, the definition of the class does not include the implmentation of INavigable. After discovering this, I thought "no problem, I'll create another partial class file reiterating the implmentation". Unfortunately (I'm guessing because it isn't being serialized), that interface isn't recognized in the Infrastructure project, so I can't simply do that. Here's where it gets really weird. The BOOK project CAN see the INavigable interface. In fact I use it in Book, though Book has no reference to the Web Service in the Web project where the thing is define, though Infrastructure does. Just as a test, I linked to the INavigable source file from indside the Infrastructure project. That allowed me to reference it in that project and compile, but causes havoc in the Book project, because now there's a conflick between the one define in Infrastructure and the one defined in the Web project's web service. This is behavior I would expect. So, to try and sum up a bit. Web project has a web service that process data from a third-party service and has a class and interface defined in it. The class implements the interface. The Infrastructure project references the web service in the Web Project and the Book project references the Infrastructure project. The implmentation of the interface in the class does NOT serialize down, so the auto-genned code in INfrastructure does not show this relationship, breaking code further down-stream. The Book project, whihc is further down-stream CAN see the interface as defined in the Web Project, even though its only reference is through the Infrastructure project; whihc CAN'T see it. Am I simple missing something easy here? Can I apply an attribute to either the Interface definition or to the its implmentation in the class to ensure its visibility downstream? Anything else I can do here? I know this is a bit convoluted and anyone still with me here, thanks for your patience and any advice you might have. Cheers, Steve

  Read the article

• How do I prevent my form from freezing when it is loading an image from the web at the click of a button?

  - by Vimal Basdeo

  I want to display an image from the web to a panel in another Jframe at the click of a button but whenever I click the button first the image loads and during this time the current form potentially freezes and once the image has loaded the form is displayed with the image.. How can I avoid the situation where my form freezes since it is very irritating My codes :: My current class private void btn_TrackbusActionPerformed(java.awt.event.ActionEvent evt) { try { sendMessage("Query,map,$,start,211,Arsenal,!"); System.out.println(receiveMessage()); } catch (UnknownHostException ex) { Logger.getLogger(client_Trackbus.class.getName()).log(Level.SEVERE, null, ex); } catch (IOException ex) { Logger.getLogger(client_Trackbus.class.getName()).log(Level.SEVERE, null, ex); } catch (Exception ex) { Logger.getLogger(client_Trackbus.class.getName()).log(Level.SEVERE, null, ex); } client_trackedbus nextform=new client_trackedbus(planform,connection,packet_receive,packet_send); this.setVisible(false); this.dispose(); nextform.setVisible(true); // TODO add your handling code here: } My next class that displays the image public class client_trackedbus extends javax.swing.JFrame { client_planform planform=null; DatagramSocket connection=null; DatagramPacket packet_receive=null; DatagramPacket packet_send=null; JLabel label=null; /** Creates new form client_trackedbus */ public client_trackedbus(client_planform planform,DatagramSocket connection,DatagramPacket packet_receive,DatagramPacket packet_send) { initComponents(); this.planform=planform; this.connection=connection; this.packet_receive=packet_receive; this.packet_send=packet_send; try { displayMap("http://www.huddletogether.com/projects/lightbox2/images/image-2.jpg", jPanel1, new JLabel()); } catch (MalformedURLException ex) { Logger.getLogger(client_trackedbus.class.getName()).log(Level.SEVERE, null, ex); } } private void displayMap(String url,JPanel panel,JLabel label) throws MalformedURLException{ URL imageurl=new URL(url); Image image=(Toolkit.getDefaultToolkit().createImage(imageurl)); ImageIcon icon = new ImageIcon(image); label.setIcon(icon); panel.add(label); // System.out.println(panel.getSize().width); this.getContentPane().add(panel); } /** This method is called from within the constructor to * initialize the form. * WARNING: Do NOT modify this code. The content of this method is * always regenerated by the Form Editor. */ @SuppressWarnings("unchecked") // <editor-fold defaultstate="collapsed" desc="Generated Code"> private void initComponents() { jPanel1 = new javax.swing.JPanel(); jLabel1 = new javax.swing.JLabel(); btn_Exit = new javax.swing.JButton(); btn_Plan = new javax.swing.JButton(); setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE); setTitle("Public Transport Journey Planner"); javax.swing.GroupLayout jPanel1Layout = new javax.swing.GroupLayout(jPanel1); jPanel1.setLayout(jPanel1Layout); jPanel1Layout.setHorizontalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 368, Short.MAX_VALUE) ); jPanel1Layout.setVerticalGroup( jPanel1Layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGap(0, 172, Short.MAX_VALUE) ); jLabel1.setFont(new java.awt.Font("Arial", 1, 18)); jLabel1.setText("Your tracked bus"); btn_Exit.setText("Exit"); btn_Exit.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { btn_ExitActionPerformed(evt); } }); btn_Plan.setText("Plan journey"); btn_Plan.addActionListener(new java.awt.event.ActionListener() { public void actionPerformed(java.awt.event.ActionEvent evt) { btn_PlanActionPerformed(evt); } }); javax.swing.GroupLayout layout = new javax.swing.GroupLayout(getContentPane()); getContentPane().setLayout(layout); layout.setHorizontalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(104, 104, 104) .addComponent(jLabel1)) .addGroup(layout.createSequentialGroup() .addContainerGap() .addComponent(jPanel1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE)) .addGroup(layout.createSequentialGroup() .addGap(65, 65, 65) .addComponent(btn_Plan) .addGap(65, 65, 65) .addComponent(btn_Exit, javax.swing.GroupLayout.PREFERRED_SIZE, 87, javax.swing.GroupLayout.PREFERRED_SIZE))) .addContainerGap(20, Short.MAX_VALUE)) ); layout.setVerticalGroup( layout.createParallelGroup(javax.swing.GroupLayout.Alignment.LEADING) .addGroup(layout.createSequentialGroup() .addGap(35, 35, 35) .addComponent(jLabel1) .addGap(18, 18, 18) .addComponent(jPanel1, javax.swing.GroupLayout.PREFERRED_SIZE, javax.swing.GroupLayout.DEFAULT_SIZE, javax.swing.GroupLayout.PREFERRED_SIZE) .addGap(18, 18, 18) .addGroup(layout.createParallelGroup(javax.swing.GroupLayout.Alignment.BASELINE) .addComponent(btn_Exit) .addComponent(btn_Plan)) .addContainerGap(12, Short.MAX_VALUE)) ); pack(); }// </editor-fold> private void btn_ExitActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: Exitform(); } private void btn_PlanActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: this.setVisible(false); this.dispose(); this.planform.setVisible(true); } private void Exitform(){ this.setVisible(false); this.dispose(); } /** * @param args the command line arguments */ public static void main(String args[]) { java.awt.EventQueue.invokeLater(new Runnable() { public void run() { // new client_trackedbus().setVisible(true); } }); } // Variables declaration - do not modify private javax.swing.JButton btn_Exit; private javax.swing.JButton btn_Plan; private javax.swing.JLabel jLabel1; private javax.swing.JPanel jPanel1; // End of variables declaration }

  Read the article

• Struct Method for Loops Problem

  - by Annalyne

  I have tried numerous times how to make a do-while loop using the float constructor for my code but it seems it does not work properly as I wanted. For summary, I am making a TBRPG in C++ and I encountered few problems. But before that, let me post my code. #include <iostream> #include <string> #include <ctime> #include <cstdlib> using namespace std; int char_level = 1; //the starting level of the character. string town; //town string town_name; //the name of the town the character is in. string charname; //holds the character's name upon the start of the game int gems = 0; //holds the value of the games the character has. const int MAX_ITEMS = 15; //max items the character can carry string inventory [MAX_ITEMS]; //the inventory of the character in game int itemnum = 0; //number of items that the character has. bool GameOver = false; //boolean intended for the game over scr. string monsterTroop [] = {"Slime", "Zombie", "Imp", "Sahaguin, Hounds, Vampire"}; //monster name float monsterTroopHealth [] = {5.0f, 10.0f, 15.0f, 20.0f, 25.0f}; // the health of the monsters int monLifeBox; //life carrier of the game's enemy troops int enemNumber; //enemy number //inventory[itemnum++] = "Sword"; class RPG_Game_Enemy { public: void enemyAppear () { srand(time(0)); enemNumber = 1+(rand()%3); if (enemNumber == 1) cout << monsterTroop[1]; //monster troop 1 else if (enemNumber == 2) cout << monsterTroop[2]; //monster troop 2 else if (enemNumber == 3) cout << monsterTroop[3]; //monster troop 3 else if (enemNumber == 4) cout << monsterTroop[4]; //monster troop 4 } void enemDefeat () { cout << "The foe has been defeated. You are victorious." << endl; } void enemyDies() { //if the enemy dies: //collapse declaration cout << "The foe vanished and you are victorious!" << endl; } }; class RPG_Scene_Battle { public: RPG_Scene_Battle(float ini_health) : health (ini_health){}; float getHealth() { return health; } void setHealth(float rpg_val){ health = rpg_val;}; private: float health; }; //---------------------------------------------------------------// // Conduct Damage for the Scene Battle's Damage //---------------------------------------------------------------// float conductDamage(RPG_Scene_Battle rpg_tr, float damage) { rpg_tr.setHealth(rpg_tr.getHealth() - damage); return rpg_tr.getHealth(); }; // ------------------------------------------------------------- // void RPG_Scene_DisplayItem () { cout << "Items: \n"; for (int i=0; i < itemnum; ++i) cout << inventory[i] <<endl; }; In this code I have so far, the problem I have is the battle scene. For example, the player battles a Ghost with 10 HP, when I use a do while loop to subtract the HP of the character and the enemy, it only deducts once in the do while. Some people said I should use a struct, but I have no idea how to make it. Is there a way someone can display a code how to implement it on my game? Edit: I made the do-while by far like this: do RPG_Scene_Battle (player, 20.0f); RPG_Scene_Battle (enemy, 10.0f); cout << "Battle starts!" <<endl; cout << "You used a blade skill and deducted 2 hit points to the enemy!" conductDamage (enemy, 2.0f); while (enemy!=0) also, I made something like this: #include <iostream> using namespace std; int gems = 0; class Entity { public: Entity(float startingHealth) : health(startingHealth){}; // initialize health float getHealth(){return health;} void setHealth(float value){ health = value;}; private: float health; }; float subtractHealthFrom(Entity& ent, float damage) { ent.setHealth(ent.getHealth() - damage); return ent.getHealth(); }; int main () { Entity character(10.0f); Entity enemy(10.0f); cout << "Hero Life: "; cout << subtractHealthFrom(character, 2.0f) <<endl; cout << "Monster Life: "; cout << subtractHealthFrom(enemy, 2.0f) <<endl; cout << "Hero Life: "; cout << subtractHealthFrom(character, 2.0f) <<endl; cout << "Monster Life: "; cout << subtractHealthFrom(enemy, 2.0f) <<endl; }; Struct method, they say, should solve this problem. How can I continously deduct hp from the enemy? Whenever I deduct something, it would return to its original value -_-

  Read the article

• (C++) Linking with namespaces causes duplicate symbol error

  - by user577072

  Hello. For the past few days, I have been trying to figure out how to link the files for a CLI gaming project I have been working on. There are two halves of the project, the Client and the Server code. The client needs two libraries I've made. The first is a general purpose game board. This is split between GameEngine.h and GameEngine.cpp. The header file looks something like this namespace gfdGaming { // struct sqr_size { // Index x; // Index y; // }; typedef struct { Index x, y; } sqr_size; const sqr_size sPos = {1, 1}; sqr_size sqr(Index x, Index y); sqr_size ePos; class board { // Prototypes / declarations for the class } } And the CPP file is just giving everything content #include "GameEngine.h" type gfdGaming::board::functions The client also has game-specific code (in this case, TicTacToe) split into declarations and definitions (TTT.h, Client.cpp). TTT.h is basically #include "GameEngine.h" #define TTTtar "localhost" #define TTTport 2886 using namespace gfdGaming; void* turnHandler(void*); namespace nsTicTacToe { GFDCON gfd; const char X = 'X'; const char O = 'O'; string MPhostname, mySID; board TTTboard; bool PlayerIsX = true, isMyTurn; char Player = X, Player2 = O; int recon(string* datHolder = NULL, bool force = false); void initMP(bool create = false, string hn = TTTtar); void init(); bool isTie(); int turnPlayer(Index loc, char lSym = Player); bool checkWin(char sym = Player); int mainloop(); int mainloopMP(); }; // NS I made the decision to put this in a namespace to group it instead of a class because there are some parts that would not work well in OOP, and it's much easier to implement later on. I have had trouble linking the client in the past, but this setup seems to work. My server is also split into two files, Server.h and Server.cpp. Server.h contains exactly: #include "../TicTacToe/TTT.h" // Server needs a full copy of TicTacToe code class TTTserv; struct TTTachievement_requirement { Index id; Index loc; bool inUse; }; struct TTTachievement_t { Index id; bool achieved; bool AND, inSameGame; bool inUse; bool (*lHandler)(TTTserv*); char mustBeSym; int mustBePlayer; string name, description; TTTachievement_requirement steps[safearray(8*8)]; }; class achievement_core_t : public GfdOogleTech { public: // May be shifted to private TTTachievement_t list[safearray(8*8)]; public: achievement_core_t(); int insert(string name, string d, bool samegame, bool lAnd, int lSteps[8*8], int mbP=0, char mbS=0); }; struct TTTplayer_t { Index id; bool inUse; string ip, sessionID; char sym; int desc; TTTachievement_t Ding[8*8]; }; struct TTTgame_t { TTTplayer_t Player[safearray(2)]; TTTplayer_t Spectator; achievement_core_t achievement_core; Index cTurn, players; port_t roomLoc; bool inGame, Xused, Oused, newEvent; }; class TTTserv : public gSserver { TTTgame_t Game; TTTplayer_t *cPlayer; port_t conPort; public: achievement_core_t *achiev; thread threads[8]; int parseit(string tDat, string tsIP); Index conCount; int parseit(string tDat, int tlUser, TTTplayer_t** retval); private: int parseProto(string dat, string sIP); int parseProto(string dat, int lUser); int cycleTurn(); void setup(port_t lPort = 0, bool complete = false); public: int newEvent; TTTserv(port_t tlPort = TTTport, bool tcomplete = true); TTTplayer_t* userDC(Index id, Index force = false); int sendToPlayers(string dat, bool asMSG = false); int mainLoop(volatile bool *play); }; // Other void* userHandler(void*); void* handleUser(void*); And in the CPP file I include Server.h and provide main() and the contents of all functions previously declared. Now to the problem at hand I am having issues when linking my server. More specifically, I get a duplicate symbol error for every variable in nsTicTacToe (and possibly in gfdGaming as well). Since I need the TicTacToe functions, I link Client.cpp ( without main() ) when building the server ld: duplicate symbol nsTicTacToe::PlayerIsX in Client.o and Server.o collect2: ld returned 1 exit status Command /Developer/usr/bin/g++-4.2 failed with exit code 1 It stops once a problem is encountered, but if PlayerIsX is removed / changed temporarily than another variable causes an error Essentially, I am looking for any advice on how to better organize my code to hopefully fix these errors. Disclaimers: -I apologize in advance if I provided too much or too little information, as it is my first time posting -I have tried using static and extern to fix these problems, but apparently those are not what I need Thank you to anyone who takes the time to read all of this and respond =)

  Read the article

< Previous Page | 875 876 877 878 879 880 881 882 883 884 885 886  | Next Page >