Search Results

Search found 4186 results on 168 pages for 'ember router'.

Page 88/168 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Sharing internet connection with WDS

  - by cornjuliox

  Is it possible to share an internet connection through WDS? I'm on the very edge of a wireless network, the spot that I'm in maintains a stable 22% according to XP with the help of a parabolic reflector crafted from a cheap pie tin. I was thinking I could grab another wireless router, use WDS to bridge the this router with the other one and share the 'net connection through it thus giving me a little bit more freedom but when I tried it it didn't work. WDS looks like it bridged the networks just fine, but I couldn't access anything on the internet. Do I need to do anything special or is this just not possible?

  Read the article

• Cannot resolve a single A Record from client machine

  - by Alex

  I set up a simple Bind server on my VPS and it is working properly. The problem occurs with my local windows machines, which are connected to internet through the home router. I created an A-record named 'dev' and it is invisible from my local network for some reason, though people from other locations can resolve dev.mydomain.com. Ironically, dev.mydomain.com cannot be resolved for myself only. If I add another A-record, say, 'gamma' then it becomes visible from my local windows machines instantly. So this is just for that particular 'dev' name. The only difference is that I had dev.mydomain.com server on another IP but that was a month ago; all nameservers have been changed since then. I tried to reboot my router and flushed dns cache on windows machines: no result. Thank you in advance.

  Read the article

• Verizon Fivespot firewall

  - by Patrick

  I have a Verizon Fivespot Wi-Fi router and am having issues connecting to the computer that uses it to get on the internet. I am able to connect to the Fivespot admin pages remotely and I am able to connect to the internet from the computer behind the Fivespot. There are two sections pertinent to this issue, Port Filtering And, Port Forwarding I've tried each individually and both together but cannot access anything through the router except for the admin page. I am trying to connect through SSH to an Ubuntu 10.04 box over wifi. I have called Verizon Tech Support but they were unhelpful, the person essentially read what it says on each screen without any elaboration. Any help is greatly appreciated!

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• Setting up a linux switch

  - by Shahmir Javaid

  I have a C++ Program to sniff each and every packet that crosses my linux box. However i need to now get my linux box to listen to every traffic in my network. I could buy a managed switch and set up port spanning, but i aint paying 200+ £'s for a switch and plus gives me a chance to learn. My Network +---------Computer A | Internet-----Router------Switch-------------+---------Linux Box | +---------Computer B Proposed Network +---------Computer A | Internet-----Router------Linux Box--------Switch eth0^ ^eth1 | +---------Computer B How would i setup this in linux. Do i just configure both the ethernet on different IP Address on the same network. Or am i completelly on the wrong track My System Fedora 13. Thanks

  Read the article

• Dediced server for all network functions?

  - by Alan

  I want to set up a fictional network configuration for a school in my neighborhood. They have about 50 computers altogether, 2X20 in computer rooms for students and another 10 scattered around for various professors. They should all access the internet through a dedicated Linux router machine. What they would like is to have domain names for those three computer groups. Lab1, Lab2 and Professors. The computers in Lab2 and Lab1 should have static ip and should all be named by numbers. So there should be 1@Lab1, 2@Lab1.... etc. And the Professors network should have a DHCP, with authentication. Is it an ok solution to have all these functions on a single server? (The one which will be used as a router) Do I have to set a local DNS for domain naming? Do the host names for Lab computers have to be set on the clients, or can they be automatically assigned?

  Read the article

• Just how slow should my VPN be?

  - by David Heggie

  I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

  Read the article

• Network Role based routing

  - by Steve Butler

  Apologies my networking skills are a tad rusty. I'm looking for a way to setup a system that gives me the ability to setup Role-based access to specific network resources. For example, i have three private subnets for specific groups, users will need access to one one or more subnets. I'd like to have all client machines on the same subnet/vlan, and then use 802.1x to authorize into a router(NAC device/whatever), the router would then see what user had authenticated(huge plus if it could determine AD group), and then allow routing to one or more of the three private subnets based upon their group membership. I've looked at packetFence, and it appears to work by assigning a client to a VLAN, but i'd still need a way to route some users into different back-end networks.

  Read the article

• How can I make my Ubuntu server accessible to the internet ?

  - by wahid

  Hi, I already installed applications to make my server web server. when I type the DHCP released ip address in the web browser, i can access it but all it says is "it works....etc". I can copy files to /var/www successfuly using WINSCP but yet, i can not see any files when I connect to it using my windows machine in the browser. Secondly , I tried to forward port on my home SMC router, it only accepts local lan ip which my ubuntu server picks up internet ip from router...what should i do ? can you help please ???? Thanks,

  Read the article

• How can HAProxy improve availibility, or "how can I prevent my site from going down"? [closed]

  - by Joe Hopfgartner

  I am aware of what HAProxy does, but what if my HAproxy goes down? Or what if my DNS servers go down? Yes, dns is less the problem. However dns only solves to an IP and an IP is announced via BGP to be routed over some router. What if that router goes down? Of course if I have complicated application servers that are likely to fail HAProxy can significantly improve uptime. But my application isnt. In fact my application may very well just be delivering a small static html file via HTTP. Basically if any user anywhere types in MYDOMAIN.COM, I want the user to get SOMETHING on the screen other than a timeout or DNS resolution error. How can I do that? The point of entry is difficult. The so called "initial closure mechanism".

  Read the article

• How to host ASP.NET application externally?

  - by Josh

  I have an ASP.NET application that I can get to locally by going to 192.168.1.102:81/TestApp. I would like to host the application externally by going to domain.com:81/TestApp (I already have my domain pointing to my router and this works fine - I have apache running on port 80 on another server). I modified the router settings to point any request coming through port 81 to 192.168.1.102. I am still having trouble accessing the ASP.NET site (I get the error message that "This link appears to be broken"). Am I missing something? How can I redirect domain.com:81/TestApp to my ASP.NET application? Thanks.

  Read the article

• How Do I Enable CUPS Browsing Across A Network?

  - by David Mackintosh

  I have a CUPS server with two print queues defined. Once this was defined, all the CUPS clients on the same subnet could see the two print queues automatically, no problem. Now I have a collection of machines on a separate subnet, reachable from the first subnet by a router. How do I enable CUPS browsing on the second set of machines so that they can see the print queues defined on the first machine? Let's call the server A.B.C.7. The first subnet is A.B.C.0/24. The second subnet is A.B.D.0/24, and there is a router with arms on both networks.

  Read the article

• Which ports for IPSEC/LT2P?

  - by Matt

  I have a firewall/router (not doing NAT). I've googled and seen conflicting answers. It seems UDP 500 is the common one. But the others are confusing. 1701, 4500. And some say I need to also allow gre 50, or 47, or 50 & 51. Ok, which ports are the correct ones for IPSec/L2TP to work in a routed environment without NAT? i.e. I want to use the built in windows client to connect to a VPN behind this router/firewall.

  Read the article

• Jumbo Frames on DIR-655

  - by Spookyone

  I am trying to set up jumbo frames on my gigabit home LAN but no luck so far. My setup is: D-Link DIR-655 router, HW Revision A3, Firmware 1.21 EU Synology DS107+, Firmware 3.0-1337 Laptop w/ Win7 x64, external PCIx NIC managed by "Generic Marvel Yukon 88E8053 based Ethernet Controller" The router is supposed to support jumbo frames but doesn't feature any relevant setting. I set the Jumbo Packet value to 9000 on both the NIC and the Synobox but it doesn't work, ping -f -l 8972 says "Packet needs to be fragmented but DF set". Is there any other setting I overlooked, the DIR-655 doesn't actually support jumbo frames, or what else could be the problem?

  Read the article

• Cross-platform automatic adhoc wifi?

  - by marienbad

  I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

  Read the article

• WDS (Wireless Distribution System) not work [migrated]

  - by xdevel2000

  I've a dlink di-524 as main router (192.168.0.1) connected to Internet and a second router (192.168.0.2), a tplink wr841n, with WDS enabled and correctly configured to "join" with dlink. After I connect via wireless a laptop (192.168.0.100) to tplink and both work good but with the laptop I can't go to Internet. It seems as WDS not work. With the laptop I can only ping the tplink but other ping (the dlink or other LAN computer not responding). What's the problem? Perhaps also the dlink must have the WDS option? Thanks.

  Read the article

• NAT : understanding about interconnection

  - by PITCHY

  English version below J'ai 2 routeurs A et B relié en série avec les ip respectives ( 10.0.0.1/30 10.0.0.2/30) sur le routeur A j'ai activé la fonction NAT avec un pool (200.0.0.1 - 200.0.0.15/28). Lorsque je sors je prends donc un ip du pool par exemple 200.0.0.10. Comment ça fonctionne sachant que ma nouvelle ip (200.0.0.10) ne se trouve pas sur le meme réseau que mon interface de destination (10.0.0.2)? English: I have 2 routers A and B, interconnected with a serial connection, with the ip's 10.0.0.1/30 for A and 10.0.0.2/30 for B. On router A NAT was activated with the pool 200.0.0.1 - 200.0.0.15/28. When connection to this router, I get an ip from the pool, for example 200.0.0.10. Knowing my new ip is 200.0.0.10, which is not on the same network as my destination interface (10.0.0.2), how can this work?

  Read the article

• How can I disrupt my roommate's BitTorrent?

  - by bob

  We're on a 50 mb/s Comcast connection and our connection right now is coming in under 1.5 mb/s. Our roommate left for a week with BitTorrent running (Azureus client, we think). Our latency is approaching 300 ms. His door is locked up tight, and both his machine and the router for the house are located inside. I've even flipped the power breaker in the house and that barely works for 2 minutes. His laptop keeps on running, and once the cable modem and router come back up and the machine reconnects, the torrents resume in earnest. I've been running nmap and identified his IP on our LAN. Is there anything I can do over the LAN to make his torrents start to fail or slow down?

  Read the article

• Does my dd-wrt installation support firewall logging?

  - by SpikeX

  I would like to log firewall events. I know this is possible with dd-wrt, but a lot of the documentation I've read states that this isn't possible with a micro installation of dd-wrt (based on BusyBox). I have a Netgear WNDR3700v2 router, and it does have BusyBox installed on it, but I don't know if the dd-wrt build is a micro build or not. How can I find this out, or how can I find out if my router supports firewall logging or not? Currently, if I enable all firewall logging (setting everything to "Enabled" and/or "High" gives me back blank firewall logs - but syslogd is working because I can view other system log messages).

  Read the article

• Squid3 not working. Access denied

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• how to set up domain name, bad request invalid hostname

  - by user45645

  assume i have a domain name which will be forwarded to my public ip (web server) automatically. in IIS 6, ip is public ip port is 6666, advanced - host value is www.hello.com firewall is open for 6666(web server port) and 53(DNS port), DMZ of router is my physical address in DNS, i have already had a zone called oldhello.com. And i expect a new domain name. So i have addded a new zone called hello.com and checked SOA server (P) is one.hello.local. then added a new host called one, full name is one.hello.com, ip address 192.168.7.3(my address in router) and then add a alias(CNAME) www, full name is www.hello.com, FQDN i choose the host i added before (one.hello.com) i expected that when i type the public ip in browser, can it be changed to domain name automatically. if not set host value www.hello.com, use public ip i can see the web however, after set up host value www.hello.com, browser show bad request invalid hostname

  Read the article

• Can't access internet even though everything is working

  - by entity64

  A friend recently upgraded to a new cable internet connection. The modem connects to the router and various PCs and smartphones from her roommates connect to the router. They don't have any problem accessing the internet. She has Windows 8 and can't access any website (via wifi and ethernet). DNS (UDP) is working, DHCP set up everything correctly, Wifi is working, Trace routes and Pings (ICMP) go through with no problem at all. But neither Dropbox nor Skype nor Spotify nor any browser (all TCP) can access any website. The thing is though, she can connect through the university wifi and via a neighbors wifi. It's just her home connection. No firewalls are running and the computer is clean - no malware. How could it be that only her home connection won't work and others do?

  Read the article

• Connecting desktop computer to the internet through laptop wifi

  - by Josh

  Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

  Read the article

• Reasons for Wi-Fi to be slower on Ubuntu compared to Windows?

  - by den-javamaniac

  I'm using 64-bit Ubuntu 12.04 and Windows 7 64 bit – dual boot on the same computer. Connecting to the same wireless network. And it turns out that on Windows I get a more stable and stronger signal than on Ubuntu. To my knowledge there's a router which serves as a gateway and then there's a cable connected to the router which goes further to ISP, so the results for both OS should be the same. I've tested the issue on both OSs at various times and it gave me the same result. The question is why? Why Ubuntu networking is worse than that of Windows?

  Read the article

• Can I mix CAT5 and CAT6?

  - by Jason94

  I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >