Search Results

Search found 7122 results on 285 pages for 'wait cursor'.

Page 88/285 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Resuming from hibernation shows a fuzzy "static" screen

  - by Ross

  When I resume from hibernation in Ubuntu 10.10 the screen shows static, very similar to what you see on an analogue TV that hasn't been tuned properly. This also occurs on boot from shut down, but only for a moment after the Plymouth boot screen. The static lasts for at least 5 minutes. An odd thing that happens is that the mouse pointer, as a lighter square of static, becomes visible and you can move it around. Attempting to change into a terminal (i.e. Ctrl+Alt+F1) doesn't seem to work (and I'm not sure if that can be done from the login screen). Resuming from suspend has different issues - vertical lines appearing for a second before appearing to be in terminal mode (blinking cursor) and then going to the lock screen. I'm running Ubuntu 10.10 on a Dell Studio 15 with ATI graphics, however I'm not using the proprietary drivers as I had issues with dual-screen support, so it's the generic X.org drivers being used.

  Read the article

• My computer boots up with Ubuntu: How can I tell what's on my hard disk?

  - by Larry Harson

  I've acquired an old laptop (Acer TravelMate 4050 with an Italian keyboard) that boots up with the following options: Ubuntu, with Linux 3.0.0-12-generic Ubuntu, with Linux 3.0.0-12-generic (recovery mode) Memory test (memtest86+) Memory test (memtest86+, serial console 115200) When I choose the first option, the screen just goes blank with a flashing cursor. But I can go into grub command mode by typing 'c'. Now, I want to know what operating system is installed, and the files stored on my computer, so how do I do this? What can I do to maximise the use of this computer in its current state?

  Read the article

• Mount external HD ubuntu 12.10

  - by Luigi Tiburzi

  Although it's an abundantly treated matter, I'm unable to find an answer valid for my needs. I had a 12.04 installation of ubuntu and I decided to install the 12.10. I copied (using GParted) the partition where my system was to an external hd where there is a windows partition. Then I installed the newest ubuntu version and now I want to take back some files (for example my .emacs) from that partition but when I try to mount it, it is not found as sdb and if I mount it from /dev/usb/hddev0 I don't get any output, only a blinking cursor, no errors, no output. I even tried to mount it as an ntfs disk but the result was the same. It's like the hd cannot be detected. So how can I access data to that disk? Could I get them from GParted terminal instead of Ubuntu one? Thanks

  Read the article

• How to open the terminal? (Mis-configured the profile)

  - by JiminP

  I am quite new to Ubuntu. (I started to use Ubuntu about a year ago, but I don't know how to use things like terminal well. All I used by console was easy things like ls or cd, to use gcc.) Today, I found 'profile' property of the terminal, and I created a new profile. Then, I changed some properties like font color and opacity. Soon, I found something like 'command', and for test, I set that to ls. I closed and re-opened the terminal. However, the terminal terminates right after it appeared. I soon remembered that there was option like 'close right after the command is executed'. Therefore, I can't use Gnome Terminal D: ... I found Konsole at Ubuntu software center, but that's just not my style (especially cursor, its position is little weird...). Question : How to change the profile of Gnome Terminal, without opening it?

  Read the article

• Failed Update & Mouse Issues

  - by James

  I`m using my gfs computer - but I do have Ubuntu 11.10 up and running well to some degree. Still need to work out some bugs but not quite sure how to do that. My mouse is only somewhat responsive - cursor moves, and able to click on things but still unable to do a double click function. Left mouse button still not working at all. Tried running updates but it keeps coming up synaptic error. Not sure what that means. I have read that some people have done reinstalls of Ubuntu and it corrected the problems - not sure if that could work. Comments would be appreciated. Installed Ubuntu 11.10 but thinking of trying to wipe the system to do a fresh install can someone tell me how I get back to the Ubuntu installation menu. Wondering if gnome may need to be reset but not sure.

  Read the article

• Gnome Shell opens as classic

  - by Joe Horgan

  I'm running 12.04 on a Gateway LT4004u netbook, and I installed Gnome3 using the apt-get commands in the terminal. When I rebooted and ran "Gnome Shell" it opened up classic mode. I thought that my cursor might have slipped the first time, but on multiple retries logging in under gnome shell would open the gnome classic desktop. I even uninstalled Gnome Shell and reinstalled it with software center, but I still have the same problem. I was wondering if this might be an issue with my graphics card? Any help would be much appreciated, thanks! -Joe

  Read the article

• how to bind super+s to indicator applete complete? - gnome classic

  - by rrosa

  i use gnome classic, i'm not a mouse fan. when i get an email while i'm writing code, i i would super+s to get to the indicator-applet-complete and read it. also to write emails, or check unread instant messages. upgrading from 12.04 to 14.04 made super+s bind to applications menu rather than the indicator applet complete. i removed the binding from the applications using dconf-editor, navigating to: org-gnome-desktop-wm-keybindings and disabling (['disabled']) the panel-main-menu key. now, how do i bind super+s to the indicator applet complete? it seems to be some how binded, since if if press super+s and then move the cursor over the applet it'll open the drop down menus (and it won't if i hover without pressing super+s) but i don't want to have to use the mouse...

  Read the article

• Ubuntu Software Center and Update Manager fail to open

  - by Giancarlo Palmiotti

  After attempting to install Google Chrome i386 the installation failed. I then proceeded to the AMD64 to see if it was the problem but...... My computer froze and I forced shut down. Now apport has a message saying An Error occurred please run Package Manager to fix the problem E:the package google-chrome-stable needs to be reinstalled but but i cant find an archive on it) This usually means your packages have unmet dependencies. Solution anyone PS:Update manager does not work and I don't have Snyaptic. The file itself failed at the real real end and froze everything but the cursor.

  Read the article

• Do Nvidia's drivers work in 12.10?

  - by Pratyush Nalam

  I recently upgraded to 12.10 and was just checking for proprietary drivers to be installed. I found this in software sources When I enabled Nvidia binary Xorg driver, unity disappears along with the launcher and everything. I just have the wallpaper. I did manage to open the terminal and open software sources and select the nouveau display driver which fixed it. Question is how to enable NVIDIA binary Xorg driver and have everything working? Hardware: Apple MacBook Pro 9,1 Mid 2012 15 inch non-retina. NVIDIA GeForce GT650M EDIT: I tried the solution here. And now, when I boot into Ubuntu, I get a blinking cursor. That's all! No tty1, nothing. help !!

  Read the article

• Problem with Ubuntu 12.04 boot

  - by Etienne

  I'm having a problem as stated in the title regarding bootup. What happens basically is that after grub is loaded the system doesn't boot. I get a black screen with cursor blinking then the screen darkens ( switches off ) and keyboard is unresponsive. Today I have re-installed everything on a new hard drive and it happened again. This has been observed when running kernel 3.5.0-30 and 3.5.0-28. System is an HP6550b. Can someone help me on this please ? Many Thanks!

  Read the article

• Ubuntu Screensaver Freezes?

  - by user11833

  I am using ubuntu 10.04. Over the last couple of days, I am having a weird problem: once the machine gets into screen saver, it is impossible to get it "out". I do see the mouse cursor move as I move the mouse, but the login popup (with user / password) does not show up and the screen remains "frozen". Any idea what might be going wrong? For the time being, I have no choice but to restart the computer in order to be able to resume work. Thanks.

  Read the article

• 12.10 starts up to just my desktop background [closed]

  - by Alex

  Possible Duplicate: Unity does not start after installing the fglrx drivers on 12.10 I have only just started using linux more than just instlling it on an old pc for fun and have just changed the driver settings from the default option. The computer starts up and goes through everything else well, but at slightly lower resolution. Once signing on to Ubuntu, it only displays my desktop background and cursor. Can i restore it to the default driver settings? I've spent a while transferring files and don't want to reinstall Ubuntu.

  Read the article

• Stuck at boot, both with wubi and USB

  - by Christoffer

  I have tried installing Ubuntu 12.04 through USB and with wubi interface. Nothing works. With USB, I will enter the main menu, doesn't matter what i choose, "install ubuntu on a hard drive" or "boot into ubuntu from USB". When I click on one of those it will scan my drives or something, and when it gets to the USB it gets stuck. It just stays there.... With wubi, the install goes fine, but when trying to boot for the first time to ubuntu it says "completing ubuntu installation"... NOTHING more happens, that cursor only blinks there. How can I get Ubuntu to work??? I got: 1TB HDD, 256GB HDD, 80GB SSD. I'm trying to install Ubuntu on my 256 GB HDD....

  Read the article

• Problems after upgrading from 10.04 to 12.04

  - by Paul D

  I upgraded to 12.04.1 from 10.04 recently and am running the Gnome Classic (no effects) desktop. I spent a couple of days tweaking the appearance and behaviour but there are two issues that I can't resolve. The mouse cursor frequently disappears, especially when scrolling through web pages or hovering over links/icons with tooltips. Moving the mouse brings the pointer back but it vanishes again almost immediately. Note I don't have unclutter or Parallels installed. The screen no longer fades to black when left idle for too long - it just cuts out. Bad news when watching content online. Any tips greatly appreciated. Cheers...

  Read the article

• ctrl + a doesn't work in browsers

  - by protos87

  The combination for select all (ctrl+a) doesn't work in a browser (either if we speak about firefox or chromium). It doesn't work if I try to clik in to the adress bar nor if I try to use it to select what I've written in google search bar at google.com. When I press ctrl + a it simply takes the cursor before the first letter. This doesn't happen when I use a text editor software like Libre Office. There the shortcut does what's supposed to do, selecting all the text. What could be the problem?

  Read the article

• 12.04 Server- No Such Partition After Adding HDD

  - by Mark

  12.04 server installed. Physically added a 1TB drive to system and I'm now getting: GRUB loading. error: no such partition. grub rescue> Any thoughts/suggestions? Mark EDIT: Once I create a partition on the new drive (with GParted from LiveCD), I get a blinking cursor at boot and nothing else. EDIT: Unplugged first drive and tried to install on 2nd (1TB v. 120GB). When creating partition I get Incorrect metadata area header checksum in virtual console(f4)

  Read the article

• Unity freezes when laptop screen is closed

  - by Giacky98

  I have an Asus laptop running Ubuntu 12.04. It's configured to do nothing when the laptop screen is closed. But sometimes, when I close the screen and when I reopen it, after I move the mouse to reactivate the screen, my Unity interface is frozen and I can't click on anything. I can move the cursor, and if there's a music playing it keeps playing, but I can't click on anything. I can open a bash shell typing Ctrl+Alt+F2, but there I don't know what to do, I can only login and type sudo reboot to reboot the machine... Is there someone that has the same problem or that knows the solution?

  Read the article

• after login, the desktop remains blank.

  - by MobileDev123

  Hi, I have installed Ubuntu 10 last night and finished all upgrading stuff, in the time when updates are applied I downloaded a torrent file. As soon as download is finished I rebooted my system. As usual at start up it asked my login and I did the same. After a successful login It should show me the desktop, or show an error message in case anything has gone wrong. But what I had is only a cursor and a blank wall paper. Can anybody tell me what is the problem and how to resolve this? Thanks

  Read the article

• Ctrl-R Not Working in SSMS After a Patch?

  - by andyleonard

  I whined about this recently on Facebook. After that, I did something practical: I searched for a solution. I found a workaround at Connect : Open SSMS Select "Tools", "Customize..." - Click "Keyboard..." - In the list window, scroll down and select "Window.ShowResultsPane" - Under "Use new shortcut in:", select "SQL Query Editor" - Place your cursor in the "Press shortcut keys:" input area and press Ctrl+R - Click "Assign",...(read more)

  Read the article

• Dell Inspiron 1210 mini Blank Screen on boot 12.04

  - by jrod

  Dell Inspiron 1210 mini Blank Screen on boot 12.04 If I mash buttons I get to a gray screen then the login screen and into the desktop but normally I turn on the laptop and I see a black screen with a cursor then a purple screen then it just goes black. I can hit ctrl alt F1 or F2 and get a prompt. I've tried using the poulsbo ppa driver script fix but that doesn't work. I don't knwo what to do now. I have the OS installed and when I did get into the OS by mashing buttons I installed updates and wireless adapter drivers. It works but if I reboot I jsut get to the black screen and have no idea what to do. What needs to be done so that I can just boot up and see the login screen!?

  Read the article

• UBUNTU 11.10 will not boot after succesfully installed on 8GB usb 3.0 pendrive

  - by Oldrifle

  UBUNTU 11.10 on 8GB USB 3.0 pendrive. Drive Partitioned using gparted. 4GB BASE 3GB Home 600MB swap Installation Ok. Restart blinking cursor. Installed another distro on another USB 3.0 stick. It boots OK. --------------- DEBUG -------------------------------------- Boot Other distro and check: I compare boot file with another linux. grub of ubuntu is 1.4mb contend is different. Taken photo with mobile camera but can not add here. Files has note(music) sign on it. Downloaded 11.10 desktop and Installed. Same result. Will download 12.x when ready and try. Ready to try any suggestion.

  Read the article

• Not your typical Permission Denied Question

  - by Todd

  I recently reinstalled Ubuntu 11.10 (64 Bit) on my computer. (My hard drive took a powder) Before, I could "mv" files around with the command. Now when I try I get the permission denied message. I also get the message about "man sudo" when I open my terminal. I am pretty sure I did not get that before. Can I add a user/administrator and change something in my orginal admin that I cannot change myself? I am getting really frustrated with this. I do not recall having the same problem before. I tried qksudo nautilus and it appears to run then it sits there with the cursor blinking but does not move.

  Read the article

• Mouse on screen lags

  - by Jeggy

  I just made a fresh install of Ubuntu 13.10 64bit on my Dell XPS 15 laptop. My mouse lags/glitches/blinks each time something is loading in Ubuntu. when a youtube video is playing in the background it blinks all the time, and it also blinks for each character that I write, it's very annoying. It also blinks for each time the Blinking Cursor in a text field blinks. When I have just booted up my laptop it can be away for a second or more (than after it comes back it goes away for a second or more and this happends for awhile), so I have no chance of seeing the mouse on my screen.

  Read the article

• Mouse and keyboard focus problem

  - by heffaklump

  I have two Chrome windows side by side. I click a link in window#1, ok. Now I want to switch to window#2 and click anywhere in the window. Noting happens. Sometimes the cursor switch to make-bigger-window style. If I click in the top part of current window. And then in the top part of next window I can switch focus so the other window works. Another problem is that the keyboard focus can get stuck in one window. I can click on things in one window but when using the keyboard it will change the first window. Only by closing the window that has the focus, it will release keyboard. What is this madness? Another problem not related is that sometimes I get logged out. Just like that.

  Read the article

• PC won't boot up after installing 11.10

  - by bakhshu

  I have a HP/Compaq s1010z (AMD64) desktop and installed 11.10 from a CD (using the entire disk). So it formatted the entire drive, went through installation and then it ejected the CD and asked me to click the Restart button, which I did. It rebooted fine the first time, but any time thereafter, it fails. Meaning, after the initial BIOS screen, the monitor seems to be stuck in limbo with a text cursor blinking on the top left corner, as if it can't find anything to boot from. At first I tried reinstalling (reformat entire drive again) - no improvement. Then I did an in-place re-installation (leave home dirs in place, just redo the OS), nothing there either. Then I put in the 11.04 CD, changed the boot order to CD first, and got the CD menu, chose 'Boot from first hard disk' and it booted fine. The problem is that I can't boot without the 11.04 CD, how ironic! Any ideas?

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >