Search Results

Search found 22961 results on 919 pages for 'memory management'.

Page 880/919 | < Previous Page | 876 877 878 879 880 881 882 883 884 885 886 887  | Next Page >

  • what is the best mid/high-end class audio/music creation audio sound card?

    - by Chris
    Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

    Read the article

  • SQL2008R2 install issues on windows 7 - unable to install setup support files?

    - by Liam
    I am trying to install the above but am getting the following errors when its attempting to install the setup support files, This is the first error that occurs during installation of the setup support files TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDF039760%25401201%25401 This is the second error that occurs after clicking continue in the installer after the first error is generated TITLE: Microsoft SQL Server 2008 R2 Setup ------------------------------ The following error has occurred: SQL Server Setup has encountered an error when running a Windows Installer file. Windows Installer error message: The Windows Installer Service could not be accessed. This can occur if the Windows Installer is not correctly installed. Contact your support personnel for assistance. Windows Installer file: C:\Users\watto_uk\Desktop\In-Digital\Software\Microsoft\SQL Server 2008 R2\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi Windows Installer log file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20110713_205508\SqlSupport_Cpu64_1_ComponentUpdate.log Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xDC80C325 These errors are generated from an ISO package downloaded from Microsoft. I have also tried using the web platform installer to install the express version instead but the SQL Server Installation fails with that also. The management studio installs fine but not the server. I have checked to make sure that the Windows Installer is started and it is. Cant seem to find an answer for this anywhere as all previous reported issues appear to be related to XP. I did have the express edition installed on the machine previously but uninstalled it to upgrade to the full version, I wish I hadn't now. Can anyone kindly offer any advice or point me in the right direction to stop me going insane with this? Any advice will be appreciated. Update======================= After digging a bit deeper ive located details of the error from the setup log file, i can also upload the log file if required. MSI (s) (E8:28) [23:35:18:705]: Assembly Error:The module '%1' was expected to contain an assembly manifest. MSI (s) (E8:28) [23:35:18:705]: Note: 1: 1935 2: 3: 0x80131018 4: IStream 5: Commit 6: MSI (s) (E8:28) [23:35:18:705]: Note: 1: 2337 2: 0 3: Microsoft.SqlServer.GridControl.dll MSI (s) (E8:28) [23:35:22:869]: Product: Microsoft SQL Server 2008 R2 Setup (English) -- Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:916]: Internal Exception during install operation: 0xc0000005 at 0x000007FEE908A23E. MSI (s) (E8:28) [23:35:22:916]: WER report disabled for silent install. MSI (s) (E8:28) [23:35:22:932]: Internal MSI error. Installer terminated prematurely. Error 2337. The installer has encountered an unexpected error. The error code is 2337. Could not close file: Microsoft.SqlServer.GridControl.dll GetLastError: 0. MSI (s) (E8:28) [23:35:22:932]: MainEngineThread is returning 1603 MSI (s) (E8:58) [23:35:22:932]: RESTART MANAGER: Session closed. Installer stopped prematurely. MSI (c) (0C:14) [23:35:22:947]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (0C:14) [23:35:22:947]: MainEngineThread is returning 1601 === Verbose logging stopped: 13/07/2011 23:35:22 ===

    Read the article

  • Proliant server will not accept new hard disks in RAID 1+0?

    - by Leigh
    I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

    Read the article

  • Why would VMWare to go defunct? How to recover from/prevent it?

    - by Josh
    I am running VMWare Server 2.0.2 (Build 203138) on a dual core Intel i5 with Ubuntu Server 10.04 LTS system (kernel 2.6.32-22-server #33-Ubuntu SMP). Disk Subsystem is a software RAID5 array. The system has been set up for a little over a week. For the past 5 days I have been running at leat 3 VMs (Linux and a variety of Windows OSes) with no issues whatsoever. But while I was installing Linux onto a new VM, suddenly all VMs became unresponsive, including the one I was installing to. I could not log in to the VMWare Management Interface, and the system was somewhat unresponsive via SSH. When I looked at top, I saw: top - 16:14:51 up 6 days, 1:49, 8 users, load average: 24.29, 24.33 17.54 Tasks: 203 total, 7 running, 195 sleeping, 0 stopped, 1 zombie Cpu(s): 0.2%us, 25.6%sy, 0.0%ni, 74.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8056656k total, 5927580k used, 2129076k free, 20320k buffers Swap: 7811064k total, 240216k used, 7570848k free, 5045884k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 21549 root 39 19 0 0 0 Z 100 0.0 15:02.44 [vmware-vmx] <defunct> 2115 root 20 0 0 0 0 S 1 0.0 170:32.08 [vmware-rtc] 2231 root 21 1 1494m 126m 100m S 1 1.6 892:58.05 /usr/lib/vmware/bin/vmware-vmx -# product=2; 2280 jnet 20 0 19320 1164 800 R 0 0.0 30:04.55 top 12236 root 20 0 833m 41m 34m S 0 0.5 88:34.24 /usr/lib/vmware/bin/vmware-vmx -# product=2; 1 root 20 0 23704 1476 920 S 0 0.0 0:00.80 /sbin/init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 [kthreadd] 3 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/0] 4 root 20 0 0 0 0 S 0 0.0 0:00.84 [ksoftirqd/0] 5 root RT 0 0 0 0 S 0 0.0 0:00.00 [watchdog/0] 6 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/1] The VMWare process for the virtual machine I was installing into became a zombie. Yet, it was still consuming 100% of the CPU time on one of the cores, and I couldn't reach it or any other virtual machines. (I was logged in to one virtual machine over SSH, another via X11, and a third via VNC. All three connections died). When I ran ps -ef and similar commands, I found that the defunct vmware-vmx process had it's parent PID set to init (1). I also used lsof -p 21549 and found that the defunct process had no open files. Yet it was using 100% of CPU time... I was unable to kill any vmware-vmx processes, including the defunct one, even with kill -9. As a last resort to resolve the situation I tried to reboot the box, however shutdown, halt, reboot, and init 6 all failed to reboot/shutdown, even when given appropriate --force settings. ControlAltDel produced a message about rebooting on the console, but the system would not reboot. I had to hard power-cycle the box to resolve the situation. (See my other question, Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?) What would cause a scenario like this? What else could I have done to resolve it besides a hard reboot? What can I do to prevent such a situation in the future?

    Read the article

  • Load average is have been high over some period

    - by user111196
    We have a dedicated MySQL server and below is the a snapshot of the top. The load average has been staying at nearly 100 for an hour plus ready. top - 20:54:28 up 7:31, 2 users, load average: 83.08, 96.88, 106.23 Tasks: 278 total, 2 running, 274 sleeping, 2 stopped, 0 zombie Cpu0 : 18.8%us, 10.2%sy, 0.0%ni, 70.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 51.2%us, 4.3%sy, 0.0%ni, 44.2%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu2 : 9.0%us, 10.3%sy, 0.0%ni, 80.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 18.8%us, 7.4%sy, 0.0%ni, 73.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 7.8%us, 8.8%sy, 0.0%ni, 83.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 10.3%us, 8.4%sy, 0.0%ni, 81.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 6.2%us, 7.5%sy, 0.0%ni, 86.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 6.2%us, 6.2%sy, 0.0%ni, 87.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu8 : 8.8%us, 10.4%sy, 0.0%ni, 80.5%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu9 : 63.7%us, 4.6%sy, 0.0%ni, 12.2%id, 0.0%wa, 4.3%hi, 15.2%si, 0.0%st Cpu10 : 9.2%us, 10.2%sy, 0.0%ni, 80.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 17.3%us, 5.9%sy, 0.0%ni, 76.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 8.0%us, 8.7%sy, 0.0%ni, 83.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 10.9%us, 7.4%sy, 0.0%ni, 81.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 6.2%us, 6.9%sy, 0.0%ni, 86.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 4.8%us, 6.1%sy, 0.0%ni, 89.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 33009800k total, 23174396k used, 9835404k free, 120604k buffers Swap: 35061752k total, 0k used, 35061752k free, 16459540k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3341 mysql 20 0 14.3g 4.6g 4240 S 417.8 14.5 1673:51 mysqld 24406 root 20 0 15008 1292 876 R 0.3 0.0 0:00.19 top 1 root 20 0 4080 852 608 S 0.0 0.0 0:01.92 init 2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0.0 0.0 0:00.32 migration/0 4 root 15 -5 0 0 0 S 0.0 0.0 0:00.29 ksoftirqd/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 6 root RT -5 0 0 0 S 0.0 0.0 0:03.21 migration/1 7 root 15 -5 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 9 root RT -5 0 0 0 S 0.0 0.0 0:00.17 migration/2 10 root 15 -5 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 12 root RT -5 0 0 0 S 0.0 0.0 0:00.32 migration/3 13 root 15 -5 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 15 root RT -5 0 0 0 S 0.0 0.0 0:00.10 migration/4 16 root 15 -5 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 18 root RT -5 0 0 0 S 0.0 0.0 0:00.35 migration/5 We have also tried to run this command. What else command can help us diagnose the exact problem of this high load? netstat -nat |grep 3306 | awk '{print $6}' | sort | uniq -c | sort -n 1 LISTEN 1 SYN_RECV 410 ESTABLISHED 964 TIME_WAIT Output of vmstat 1: ---------------memory--------------- --swap-- --io-- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 12978936 30944 15172360 0 0 259 3 184 265 6 6 77 12 0

    Read the article

  • PC runs very slowly for no apparent reason

    - by GalacticCowboy
    I have a Dell Latitude D820 that I've owned for about 2.5 years. It is a Core 2 Duo T7200 2.0GHz, with 2 GB of RAM, an 80 GB hard drive and an NVidia Quadro 120M video card. The computer was purchased in late November of 2006 with XP Pro, and included a free upgrade to Vista Business. (Vista was available on MSDN but not yet via retail, so the Vista Business upgrades weren't shipped until March of '07.) Since we had an MSDN subscription at the time, I installed Vista Ultimate on it pretty much as soon as I got it. It ran happily until sometime in the spring of 2007 when Media Center (which I had never used except to watch DVDs) started throwing some kind of bizarre SQL (CE?) error. This error would pop up at random times just while using the computer. Furthermore, Media Center would no longer start. I never identified the cause of this error. I had the Vista Business upgrade by this time, so I nuked the machine, installed XP and all the drivers, and then the Vista Business upgrade. Again, it ran happily for a few months and then started behaving badly once again. Vista Business doesn't have Media Center, so this exhibited completely unrelated symptoms. For no apparent reason and at fairly random times, the machine would suddenly appear to freeze up or run very slowly. For example, launching a new application window (any app) might take 30-45 seconds to paint fully. However, Task Manager showed very low CPU load, memory, etc. I tried all the normal stuff (chkdsk, defrag, etc.) and ran several diagnostic programs to try to identify any problems, but none found anything. It eventually reached the point that the computer was all but unusable, so I nuked it again and installed XP. This time I decided to stick with XP instead of going to Vista. However, within the past couple of months it has started to exhibit the same symptoms in XP that I used to see in Vista. The computer is still under Dell warranty until December, but so far they aren't any help unless I can identify a specific problem. A friend (partner in a now-dead business) has an identical machine that was purchased at the same time. His machine exhibits none of these symptoms, which leads me to believe it is a hardware issue, but I can't figure out how to identify it. Any ideas? Utilities? Seen something similar? At this point I can't even identify any pattern to the behavior, but would be willing to run a "stress test"-style app for as long as a couple days if I had any hope that it would find something. EDIT July 17 I'm testing jerryjvl's answer regarding the video card, though I'm not sure it fully explains the symptoms yet. This morning I ran a video stress test. The test itself ran fine, but immediately afterward the PC started acting up again. I left ProcExp open and various system processes were consuming 50-60% of the CPU but with no apparent reason. For example, "services.exe" was eating about 40%, but the sum of its child processes wasn't higher than about 5%. I left it alone for several minutes to settle down, and then it was fine again. I used the "video card stability test" from firestone-group.com. Its output isn't very detailed, but it at least exercises the hardware pretty hard. EDIT July 22 Thanks for your excellent suggestions. Here is an update on what I have tried so far. Ran memtest86, SeaTools (Seagate), Hitachi drive fitness test, video card stability test (mentioned above). The video card test was the only one that seemed to produce any results, though it didn't occur during the actual test. I defragged the drive (again...) with JkDefrag I dropped the video card

    Read the article

  • Installation of Access Database Engine 32-bit Fails

    - by Rayzor78
    I am trying to install Access Database Engine 2007 32-bit. The splash screen comes up, you click "Next", then it fails with the error: Installation ended prematurely because of an error You click "OK" and another error window says: The installation of the package failed. The exact same situation happens when I try this with Access Database Engine 2010 32-bit. This production server is running Windows Server 2008 R2 SP1 64-bit. Before I tried installing Access Database Engine 32-bit, I first needed to install Microsoft Office 2010 Pro (Excel and Office Tools only). I tried the 32-bit version on the production server since that is how I set it up in our Dev environment. No luck. The 32-bit version would not install. I did NOT get the error "You have 64-bit components of Office installed". I simply received the exact same two errors listed above. So, I knew that 32-bit/64-bit did not really matter for the Office install for my project, so I installed 64-bit of Office Pro 2010 (Excel and Office Tools only) with no problems. I have a requirement that I need to have the 32-bit version of the Access Database Engine installed. 2007 or 2010, doesn't matter. I cannot use the 64-bit version of Access Database Engine 2010 because my SSIS package will not work with it. I require the 32-bit version. I've tried several steps to try to get it installed. I seriously think that the production server has some aversion to installing 32-bit applications. Here's what I've tried: Tried installing via command line with the "/passive" switch....no luck. Tried numerous iterations to copy the install file to the server (downloaded a fresh copy directly to the server, downloaded a fresh copy to my local machine then copied it over, copied it over zipped up) (http://social.msdn.microsoft.com/Forums/en-US/sqldataaccess/thread/efd3c1f0-07cd-45ca-a626-2dd0c7ac3e9f). Tried Method 1 from this link. Could not try Method 2 because it requires a server reboot and in my environment that requires a long change management process. I've verified that I am a local administrator on the server. (Evidence, I am able to install other applications (office 64-bit per above)). Verified that there are no other office products that should be blocking the installation. The fore-mentioned install of Excel 2010 64-bit was the first Office product installed on the server. VERY ODD: To test my theory that the production server does not like 32-bit applications, I installed something lightweight. I installed 7-Zip 32-bit on the production server with no problems whatsoever. Here are some things that I have not tried (i will follow-up once I do): Method 2 (as mentioned above). Requires a server reboot. Have not verified that the Dev and Production environments are 100% identical. I've done a cursory check and on the surface they appear to be the same (same OS and SP version). I need to do a deeper dive to be 100% certain. I had no problems in my Dev environment. In Dev, I installed Office 2010 Pro 64-bit (Excel & Office Tools only) then via command line w/ the "/passive" switch, installed Access Database Engine 2010 32-bit. I don't know what else to try. Any suggestions or comments?

    Read the article

  • Causes of sudden massive filesystem damage? ("root inode is not a directory")

    - by poolie
    I have a laptop running Maverick (very happily until yesterday), with a Patriot Torx SSD; LUKS encryption of the whole partition; one lvm physical volume on top of that; then home and root in ext4 logical volumes on top of that. When I tried to boot it yesterday, it complained that it couldn't mount the root filesystem. Running fsck, basically every inode seems to be wrong. Both home and root filesystems show similar problems. Checking a backup superblock doesn't help. e2fsck 1.41.12 (17-May-2010) lithe_root was not cleanly unmounted, check forced. Resize inode not valid. Recreate? no Pass 1: Checking inodes, blocks, and sizes Root inode is not a directory. Clear? no Root inode has dtime set (probably due to old mke2fs). Fix? no Inode 2 is in use, but has dtime set. Fix? no Inode 2 has a extra size (4730) which is invalid Fix? no Inode 2 has compression flag set on filesystem without compression support. Clear? no Inode 2 has INDEX_FL flag set but is not a directory. Clear HTree index? no HTREE directory inode 2 has an invalid root node. Clear HTree index? no Inode 2, i_size is 9581392125871137995, should be 0. Fix? no Inode 2, i_blocks is 40456527802719, should be 0. Fix? no Reserved inode 3 (<The ACL index inode>) has invalid mode. Clear? no Inode 3 has compression flag set on filesystem without compression support. Clear? no Inode 3 has INDEX_FL flag set but is not a directory. Clear HTree index? no .... Running strings across the filesystems, I can see there are what look like filenames and user data there. I do have sufficiently good backups (touch wood) that it's not worth grovelling around to pull back individual files, though I might save an image of the unencrypted disk before I rebuild, just in case. smartctl doesn't show any errors, neither does the kernel log. Running a write-mode badblocks across the swap lv doesn't find problems either. So the disk may be failing, but not in an obvious way. At this point I'm basically, as they say, fscked? Back to reinstalling, perhaps running badblocks over the disk, then restoring from backup? There doesn't even seem to be enough data to file a meaningful bug... I don't recall that this machine crashed last time I used it. At this point I suspect a bug or memory corruption caused it to write garbage across the disks when it was last running, or some kind of subtle failure mode for the SSD. What do you think would have caused this? Is there anything else you'd try?

    Read the article

  • mysqld service crashes on restart, after importing mysqldump #innodb

    - by ubunut
    I have 2 mysql servers. Let's call them server01 & server02. Both have the same configuration: mysqladmin Ver 8.42 Distrib 5.1.61, for redhat-linux-gnu on x86_64 [client] default-character-set=utf8 [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_allowed_packet = 16M default-character-set=utf8 default-collation=utf8_unicode_ci character-set-server=utf8 collation-server=utf8_unicode_ci default-storage-engine = InnoDB innodb_data_home_dir = /var/lib/mysql innodb_log_group_home_dir = /var/lib/mysql innodb_data_file_path = ibdata1:10M:autoextend innodb_additional_mem_pool_size = 2M innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_lock_wait_timeout = 50 innodb_flush_log_at_trx_commit = 1 innodb_buffer_pool_size = 700M table_cache = 300 thread_cache_size = 4 query_cache_size = 200m query_cache_limit = 10m [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I make a mysqldump on server01: mysqldump -uuser -ppassword --all-databases testservers.sql (most tables in these databases are innodb, some of the mysql.* tables are Innodb too) Then I import the testservers.sql on server02: mysql -uuser < testservers.sql (mysqld has been started with --skip-network). So far so good, I can login into mysql & everything seems to be ok. BUT when I exit to the shell and execute service mysqld restart, The service fails to start. stack-trace in /var/log/mysqld.log: 121022 14:53:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121022 14:53:19 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 121022 14:53:19 [Warning] '--default-collation' is deprecated and will be removed in a future release. Please use '--collation-server' instead. 12:53:19 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=0 max_threads=151 thread_count=0 connection_count=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338324 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x267e630 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7fff3efe0be0 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x29) [0x84bd89] /usr/libexec/mysqld(handle_fatal_signal+0x483) [0x6a0be3] /lib64/libpthread.so.0() [0x338d60f500] /usr/libexec/mysqld(ha_resolve_by_name(THD*, st_mysql_lex_string const*)+0x81) [0x6956e1] /usr/libexec/mysqld(open_table_def(THD*, st_table_share*, unsigned int)+0xe0a) [0x60e5ba] /usr/libexec/mysqld(get_table_share(THD*, TABLE_LIST*, char*, unsigned int, unsigned int, int*)+0x20b) [0x602b0b] /usr/libexec/mysqld() [0x603597] /usr/libexec/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x7a1) [0x6079a1] /usr/libexec/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5d0) [0x608570] /usr/libexec/mysqld(open_and_lock_tables_derived(THD*, TABLE_LIST*, bool)+0x6a) [0x60877a] /usr/libexec/mysqld(plugin_init(int*, char**, int)+0x622) [0x715af2] /usr/libexec/mysqld() [0x5bd3b2] /usr/libexec/mysqld(main+0x1b3) [0x5bfc93] /lib64/libc.so.6(__libc_start_main+0xfd) [0x338d21ecdd] /usr/libexec/mysqld() [0x5087b9] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (0): is an invalid pointer Connection ID (thread ID): 0 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 121022 14:53:19 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended A typical mysqdump entry looks like this: DROP TABLE IF EXISTS `adodb_logsql`; /*!40101 SET @saved_cs_client = @@character_set_client */; /*!40101 SET character_set_client = utf8 */; CREATE TABLE `adodb_logsql` ( `id` bigint(10) unsigned NOT NULL AUTO_INCREMENT, `created` datetime NOT NULL, `sql0` varchar(250) NOT NULL DEFAULT '', `sql1` text, `params` text, `tracer` text, `timer` decimal(16,6) NOT NULL DEFAULT '0.000000', PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COMMENT='to save some logs from ADOdb'; /*!40101 SET character_set_client = @saved_cs_client */; IF I change all occurrences of "ENGINE=InnoDB" to "ENGINE=MyISAM" before import, then the service has no problem restarting. I'm quite puzzled as to what's happening, maybe I'm just an idiot, then by all means tell me so. Any help would be greatly appreciated!

    Read the article

  • How to troubleshoot problem with OpenVPN Appliance Server not able to connect

    - by Peter
    1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenVPN Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

    Read the article

  • Determining the required depth and specifications for a server cabinet

    - by Bingu Bingme
    I'm trying to understand the considerations ("why") that go into determining the specifications ("what") for a rackmount server cabinet, in order to determine what sort of rack I should purchase for my home use. Since this is for home use, I won't be following certain best practices (eg. hot/cold aisle, not even air conditioning) and may be willing to sacrifice in various areas in order to reduce cost and footprint - but please advise if there are safety concerns or other considerations to note. The most basic specs for a server cabinet are the dimensions (external width x external depth x usable height). Width: commonly 600mm or 800mm (if the use case requires extra clearance around the sides, such as if there is lots of cabling). In my case and most common cases, I'm going to stick with 600mm. Height: Select a sufficiently tall rack to fit my equipment. But how much may I stuff into it? Eg, if there is a 15U rack, can I really populate it with 15U of servers, or should I leave 1U at top and bottom for air circulation? Depth: Racks commonly have external depth of 600mm (network equipment), 800mm, 1000mm, or even longer. I'm trying to see how to fit into the 800mm depth. With reference to http://www.server-racks.com/rack-mount-depth.html, I'm hoping to have the front and rear posts mounted ~ 28.5" (72cm) apart, which would leave only 8cm for front space and rear space. How much rear space (from rear posts to back of rack) do I really need? I won't use cable management arms, so can I mount a 72cm depth server since the power, KVM, network cables won't take up much depth? My most important equipment are all < 60cm depth (4U chassis) and should comfortably fit within the 800mm cabinet. The rest of the equipment are very old 1U servers that range from 65-72cm depth. I might still want to make further use of them, or I might discard them since they are so old. Even if the 72cm servers cannot be powered on in an 800mm rack, I should be able to use them as 1U shelves. But, what server depth can I expect to be able to operate? Or am I forced to upgrade to 1000mm depth racks in order to use any servers deeper than 60cm? With reference to best practices for HP racks, some other specs and installation considerations: There aren't any minimum recommendations for clearance on the sides of the rack. It is recommended to leave 48" front clearance. The 48" front clearance is based on 32" chassis depth, 13" to extend the rack rails and mate the inner/outer rails, and 3" for movement. If I don't use such rails (eg, use shelves instead), it should be sufficient to leave front clearance of chassis depth + 3". It is recommended to leave 30" rear clearance "to provide space for servicing the rack". I'm planning to back the rack into a corner of the room, and wheel it slightly out when I need to access the rear. If the wheeling plan is ok, I still need to know how much rear clearance is required for air circulation and ventilation purposes. Castor wheels and stabilising feet. Since I'm backing the rack into a corner of the room, I'll only be able to set the stabilising feet on the front corners. Thoughts on safety? The rack that I'm considering has front glass doors with side ventilation slits and fully perforated rear doors. I'm hoping this will be a good balance between temperature and noise (only ventilation slits facing out the front, while the rear is facing the walls). Or is the sound of high-rpm fans going to escape through the front slits anyway and destroy my sanity?

    Read the article

  • Symantec Protection Suite and System Recovery 2011 Desktop Edition

    - by rihatum
    I am re-posting this as my previous question was being treated as if I am "Shopping or seeking Product Recommendations" even though I was NOT - BTW they have deleted my comments too which were not offensive in nature. anyway - I have re-phrased some parts of my question and I hope SF Admins "Do Not Modify / Edit" this one - will be most grateful for that. I have a lot of respect for the People who visit this SITE and help others ! Just To clarify : Just to go by SF rules - I am not seeking someone to Design this solution, I am simply seeking real world examples, experiences, technical expert opinions / suggestions, any tips or tricks they may have or any problems they may have faced while doing something similar above with these products. I am also not asking for Capacity Planning for Storage, We have done some research and I am seeking Expert Assurance / Suggestions. We (our company) are planning to deploy Symantec Endpoint Protection and Symantec Desktop Recovery 2011 Desktop Edition to our 3000 - 4000 workstations (Windows7 32 and 64) with a few 100s with Windows XP 32/64 Bit. I have read the implementation guide for SEP and have read tech-notes for Desktop Recovery 2011. Our team have planned to deploy this as follows : 1 x dedicated SQL 2008R2 for Symantec Endpoint Protection (Instead of using the Embedded Database) 1 x Dedicated SQL 2008R2 for Symantec Desktop Recovery 2011 (Instead of using the Embedded Database) 1 x Dedicated W2K8 R2 Box for the SEPM (Symantec Endpoint Protection Manager - Mgmt. APP) 1 x Dedicated W2K8 R2 Box for the Symantec Desktop Recovery 2011 Management Application Agent Deployment : As per Symantec Documentation for both of the above, an agent can be pushed via the Mgmt. Application (provided no firewalls are blocking ports required etc. - we have Windows firewall disabled already). Server Hardware : Per SQL Server : 16GB RAM + SAS DISKS + Dual XEON, RAID-10 for the SQL DB or I can always mount a LUN from our existing Hitachi or EMC SAN. SEPM Server : 16GB RAM + SAS DISKS + DUAL XEON System Recovery MGMT SERVER : 16GB RAM + SAS DISKS + DUAL XEON Above is the initial plan we have for 3000 - 4000 client workstation (Windows) Now my Questions :-) a) If we had these users distributed amongst two sites with AD DC / GC in each site, How would I restrict SEPM and Desktop Mgmt. solution to only check for users in their respective site ? b) At present all users are under one building but we are going to move some dept. to a new location (with dedicated connectivity), How would we control which SEPM / MGMT Server is responsible for which site ? c) We have netbackup in our environment backing up other servers, I am planning to protect these 4 (2 x SQL, 1 x SEPM, 1 x System Recovery Mgmt. Server) via netbackup or I can use System recovery 2011 server edition on all 4 of these boxes as well. (License is not an issue as we have the complete symantec portfolio included in our license). d) Now - Saving Desktop backups - What strategies have you implemented ? Any best practice recommendation for a large user base ? I was thinking to either mount a LUN from our Hitachi SAN on the Symantec Recovery Server itself or backup to the users hard drive locally and then copy it over to a network location ? Suggestions welcome :-) If you have anything to add / correct - that will be really helpful before diving into the actual implementation phase. Will be most grateful with your suggestions, recommendations and corrections with above - Many Thanks !

    Read the article

  • How to diagnose and solve an erratic "HDCP Support Required"?

    - by Jom Orgstrom
    I am playing a digital tv broadcast on Windows Media Center for Windows 7. I built this system so it works with HDCP, and in fact I have been able to watch tv and bluray before with this same computer. However, I suddenly started getting an "HDCP Support Required" error from WMC. The entire message is as follows: HDCP Support Required High-bandwidth Digital Content Protection (HDCP) may not be supported by the current video card. Use an HDCP-compliant display, video card, and video driver. Or, connect using an analog connection such as component or VGA. Relevant specs are: CPU: Ivy Bridge Core i7-3770 Motherboard: Asus P8H77-I Memory: 16GB DDR3-1600 Graphics: Radeon HD 7850 (Driver by AMD, version 8.982.0.0 built on 2012/07/27) Display: Acer P243w connected by HDMI Sound: Roland Quad-Capture (It complains even when I use the bundled VIA HD Audio) TV Tuner: I-O Data GV-MC7/HZ3 OS: Windows 7 Professional SP1, Windows Update enabled. All patched and up to date. As you can see, there is nothing weird or old about my setup. I am also not doing anything strange, not doing any overclocking, weird system changes and so on. One thing that does happen from time to time, is that the display goes black for a few seconds (sometimes when watching media contents, sometimes when just using photoshop or Visual Studio). This happened with my previous setup as well, so I'd be inclined to think it is a display or cable issue (apart from the BD drive, these are the only things I kept from my previous setup to this one). But being a digital transfer, as far as I know, these things either work or not. Never erratically or with decreased quality. The thing is that sometimes I can watch the TV, sometimes not. This happens with recorded programs as well, so it's not a per-program thing. Sometimes rebooting helps, sometimes it doesn't. Sometimes unplugging and plugging back the HDMI connector helps, sometimes it doesn't. Sometimes doing so doesn't even turn the screen back on, so I have to reboot. Unfortunately, WMC's error message is quite unhelpful. I'd like to know exactly where the problem is, so I can solve it. I don't want to buy a brand new display just to then find out it was a registry setting that was misconfigured. I've tried looking at the system event viewer, but these errors don't show up at all in there. Other people who have this problem seem to have a setup that is not HDCP compliant, so I turn to you guys here. Anybody knows how to diagnose this problem? Edit: So I got the Cyberlink Blu-ray disc advisor. I ran it and told me everything was okay, except for the Video Connection Type, which showed as "Digital (without HDCP)". I then proceeded to unplug the power cable from the monitor, plugged it in again, ran the tool again, and now it's "Digital (with HDCP)". Needless to say, I can watch my TV and recorded programs on WMP again. I'm guessing that at some point, something may be slightly wrong with the HDCP setup, and Windows decides to reset the entire content protection path (which leads to the screen blanking out). Usually the reset succeeds, but sometimes it doesn't, so Windows defaults to turning HDCP off. There's no way to turn it back on, except by doing a hard reset of the display. I really want to know what the exact error was, so I can fix it. Is it the cable? is it the display? is it the video card? the driver? Also, is there any other way to try and turn HDCP on again without having to hard reset the display? Oh, questions, questions...

    Read the article

  • How can I recover an ext4 filesystem corrupted after a fsck?

    - by Regan
    I have an ext4 filesystem on luks over software raid5. The filesystem was operating "just fine" for several years when I was beginning to run out of space. I had a 9T volume on 6x2T drives. I began upgrading to 3T drives by doing the mdadm fail, remove, add, rebuild, repeat process until I had a larger array. I then grew the luks container, and then when I unmounted and tried to resize2fs I was given the message the filesystem was dirty and needed e2fsck. Without thinking I just did e2fsck -y /dev/mapper/candybox and it began spewing all kinds of inode being removed type messages (can't remember exactly) I killed e2fsck and tried to remount the filesystem to backup data I was concerned about. When trying to mount at this point I get: # mount /dev/mapper/candybox /candybox mount: wrong fs type, bad option, bad superblock on /dev/mapper/candybox, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Looking back at my older logs I noticed the filesystem was giving this error each time the machine booted: kernel: [79137.275531] EXT4-fs (dm-2): warning: mounting fs with errors, running e2fsck is recommended So shame on me for not paying attention :( I then tried to mount using every backup superblock (one after another) and each attempt left this in my log: EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 0 failed (26534!=65440) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 1 failed (38021!=36729) EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 2 failed (18336!=39845) ... EXT4-fs (dm-2): ext4_check_descriptors: Checksum for group 11911 failed (28743!=44098) BUG: soft lockup - CPU#0 stuck for 23s! [mount:2939] Attempts to restart e2fsck results in: # e2fsck /dev/mapper/candybox e2fsck 1.41.14 (22-Dec-2010) e2fsck: Group descriptors look bad... trying backup blocks... candy: recovering journal e2fsck: unable to set superblock flags on candy At this point, I decided it best to order some more drives and make an image using ddrescue Now two weeks later I have an image of the luks partition in a .img file. # ls -lh total 14T -rw-r--r-- 1 root root 14T Oct 25 01:57 candybox.img -rw-r--r-- 1 root root 271 Oct 20 14:32 candybox.logfile After numerous attempts using everything I could find online I could not coerce e2fsck to do anything on the image, so I used mkfs.ext4 -L candy candybox.img -m 0 -S and I was able to mount the dirty filesystem readonly without the journal and recover 960G of data. It gave all kinds of errors of various directories not existing and so forth but I was able to get some stuff. Which gave me some hope! I then ran e2fsck again and it had to recreate the root inode and gave a massive list of correcting group counts, I accepted the root inode creation and said no to everything else, leaving a completely empty filesystem. Re-ran again and said yes to all questions with the same result but now a "clean" but empty filesystem. extundelete gives me 0 recoverable inodes found. And now I'm stuck again, I can't come up with any other methods other than dropping to something like photorec which will give me an absolute mess with how large the filesystem was. I'm willing to re-copy the image from the original array and start over, if I can get any suggestions or ideas on a way to get more of my files back. I wish I could give more detailed logs of the commands that have run, but the output is long scrolled passed except for what gets logged to syslog and my memory is not as detailed due to the timeframe this has occurred over. Any help is greatly appreciated!

    Read the article

  • My 2009 MacBook Logic board failed - options to proceed and how difficult?

    - by user181061
    Scannerz just gave my MacBook logic board a big fat F! I upgraded from Snow Leopard to Mountain Lion about 3 weeks ago. The system was running short of memory so I upgraded it. The system was running fine for about 2 weeks. Yesterday the thing started acting erratic. A lot of spinning beach balls, delays, and then some errors saying files couldn't be read to or from the drive. I figured the drive was going because the system is over 3 years old. I ran Scannerz on it and it indicated a lot of errors and irregularities. I rescanned it in cursory mode, and none of them were repeatable, just showing up all over the place in different regions of the scan. I went through the docs and they implied either an I/O cable was bad, a connection was damaged, or the logic board was bad. I tossed on my backup of Snow Leopard that I cloned from the original hard drive because I figured Mountain Lion was to blame and booted from the USB drive with the clone on it. It wasn't. I performed scans on every single port, and errors and irregularities that couldn't be repeated were showing up on every single one of them. I then, for kicks, put a CD into the CD player. Scannerz doesn't test optical drives but I figured surely that will work. No it won't. More spinning beach balls and messages telling me it can't be read. It was working fine 3 days ago. I know a lot of people don't like MacBook's, but mine's been great, at least until now. It was working great even with Mountain Lion after the upgrade. The system is a mid-2009 MacBook. In my opinion, it's a complete waste to toss this system. The display is too good, the keyboard works great, and it still looks good, plus this type of MacBook still uses the FireWire 400 port and I use that for Time Machine backups. I've tried reseating the RAM, it didn't do anything. I shut the system down and put in the old RAM, booted to Snow Leopard, and the problems persist. Here are my questions: The Scannerz documentation somewhere said something about the Airport card not being seated properly, but when I go to iFixit, it's apparent, at least I think it's apparent, that this isn't a slot type Airport card that the user can easily install or remove. If the cables or connections to the Airport card are bad, could they be causing this problem. How about any other connections that can be intermittent, failing or erratic? Any type of resets that I could possibly do to get rid of this? For any of those that have replaced a logic board on a MacBook, if this really is the culprit, are there any "gotcha's" I need to be aware of? As an FYI, I replaced the hard drive on an old iBook @500MHz that I had a long time ago, and I replaced the drive on a 1.33GHz PowerBook about 6 years ago. You have to be careful, but using some of the info on web sites like iFixit it's not that hard. Time consuming, but not that hard. The Intel based MacBook's to me look like they're easier to service than either of those. I'm thinking about getting a unit off of eBay that matches mine but has something else wrong with it, like a busted display. I REFUSE to buy a new system. A guy at my office has a 2007 Mac Pro and he can't upgrade to Mountain Lion because his system is "obsoleted." That's ridiculous. If you pay nearly $7,500 for a system it shouldn't be trash just because Apple decides they don't have enough money (sorry for the soap box, but it's true, IMO!) Any input is appreciated.

    Read the article

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

    Read the article

  • Trying to prevent Windows from hibernating/sleeping automatically

    - by user328821
    My Dell XPS 8700 (Win 7) suddenly began putting itself to sleep at 6pm daily, even if I'm typing. I don't know what caused this to occur, except possibly a windows update that took place in the middle of the night. I initially went into settings for power and saw 2 plans set up, one from Dell and the other window's Power saver plan. I set both to never for sleep and hibernate yet it still occurred. I have current drivers and a fairly new UPS that has software to set to shutdown only after power loss. Dell is of little help, can anyone point me in the right direction? I did do the powerdfg -energy program and came up with this: Power Efficiency Diagnostics Report Scan Time 2014-05-08T19:21:48Z Scan Duration 60 seconds System Manufacturer Dell Inc. System Product Name XPS 8700 BIOS Date 08/23/2013 BIOS Version A04 OS Build 7601 Platform Role PlatformRoleDesktop Plugged In true Process Count 115 Thread Count 1631 Report GUID {097caf99-039b-44c3-b154-d797bfbfdfcc} Analysis Results Errors Power Policy:Sleep timeout is disabled (Plugged In) The computer is not configured to automatically sleep after a period of inactivity. System Availability Requests:System Required Request The device or driver has made a request to prevent the system from automatically entering sleep. Requesting Driver Instance HDAUDIO\FUNC_01&VEN_10EC&DEV_0899&SUBSYS_102805B7&REV_1000\4&220b1bbc&0&0001 Requesting Driver Device Realtek High Definition Audio CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 9.48 Warnings Platform Timer Resolution:Platform Timer Resolution The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations. Current Timer Resolution (100ns units) 10000 Maximum Timer Period (100ns units) 156001 Platform Timer Resolution:Outstanding Kernel Timer Request A kernel component or device driver has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Request Count 2 Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Requesting Process ID 8672 Requesting Process Path \Device\HarddiskVolume3\Program Files (x86)\Mozilla Firefox\firefox.exe Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 100000 Requesting Process ID 1212 Requesting Process Path \Device\HarddiskVolume3\Windows\System32\svchost.exe Power Policy:802.11 Radio Power Policy is Maximum Performance (Plugged In) The current power policy for 802.11-compatible wireless network adapters is not configured to use low-power modes. CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name audiodg.exe PID 1304 Average Utilization (%) 4.73 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\msvcrt.dll 1.88 \Device\HarddiskVolume3\Windows\System32\MaxxAudioAPO5064.dll 1.77 \Device\HarddiskVolume3\Windows\System32\AudioEng.dll 0.80 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name thunderbird.exe PID 6036 Average Utilization (%) 0.35 Module Average Module Utilization (%) \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\xul.dll 0.16 \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\mozjs.dll 0.05 \SystemRoot\System32\win32k.sys 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name dwm.exe PID 1340 Average Utilization (%) 0.25 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\dwmcore.dll 0.08 \Device\HarddiskVolume3\Windows\System32\nvwgf2umx.dll 0.05 \SystemRoot\system32\ntoskrnl.exe 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace.

    Read the article

  • got VPN l2l connect between a site & HQ but not traffice using ASA5505 on both ends

    - by vinlata
    Hi, Could anyone see what did I do wrong here? this is one configuration of site1 to HQ on ASA5505, I can get connected but seems like no traffic going (allowed) between them, could it be a NAT issue? any helps would much be appreciated Thanks interface Vlan1 nameif inside security-level 100 ip address 172.30.205.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address pppoe setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 shutdown ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! passwd .dIuXDIYzD6RSHz7 encrypted ftp mode passive dns server-group DefaultDNS domain-name errg.net object-group network HQ network-object 172.22.0.0 255.255.0.0 network-object 172.22.0.0 255.255.128.0 network-object 172.22.0.0 255.255.255.128 network-object 172.22.1.0 255.255.255.128 network-object 172.22.1.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_20_cryptomap extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list inside_nat0_outbound extended permit ip 172.30.205.0 255.255.255.0 o bject-group HQ access-list policy-nat extended permit ip 172.30.205.0 255.255.255.0 172.22.0.0 255.255.0.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) 172.30.205.0 access-list policy-nat access-group inside_access_in in interface inside access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute username errgadmin password Os98gTdF8BZ0X2Px encrypted privilege 15 http server enable http 64.42.2.224 255.255.255.240 outside http 172.22.0.0 255.255.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 190 match address outside_20_cryptomap crypto map outside_map 190 set pfs crypto map outside_map 190 set peer 66.7.249.109 crypto map outside_map 190 set transform-set ESP-3DES-SHA crypto map outside_map 190 set phase1-mode aggressive crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 30 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp nat-traversal 190 crypto isakmp ipsec-over-tcp port 10000 tunnel-group 66.7.249.109 type ipsec-l2l tunnel-group 66.7.249.109 ipsec-attributes pre-shared-key * telnet timeout 5 ssh 172.30.205.0 255.255.255.0 inside ssh 172.22.0.0 255.255.0.0 outside ssh 64.42.2.224 255.255.255.240 outside ssh 172.25.0.0 255.255.128.0 outside ssh timeout 5 console timeout 0 management-access inside vpdn group PPPoEx request dialout pppoe vpdn group PPPoEx localname [email protected] vpdn group PPPoEx ppp authentication pap vpdn username [email protected] password ********* dhcpd address 172.30.205.100-172.30.205.131 inside dhcpd dns 172.22.0.133 68.94.156.1 interface inside dhcpd wins 172.22.0.133 interface inside dhcpd domain errg.net interface inside dhcpd enable inside ! ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect netbios inspect rsh inspect rtsp inspect skinny inspect esmtp inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp ! end

    Read the article

  • Rosewill RSV-S5 and it's transferespeeds

    - by DoomStone
    I have just bought a Rosewill RSV-S5, I have installed 5x1,5Tb Western Digital Green disks in it. After that have I created a Raid5 on them all with the software that followed with the hardware. Not the raid it self works fine, but it is SLOW, I can only obtain a maximum of 25 MB/s, and if SABnzbd+ is downloading with 5 MB/s is it having a hard time streaming a normal DIVX (700 mb) movie. Is this normal or is there something wrong? Edit: should be able to handle 3 Gbps = 384 megabytes / second Edit 2: As you can see am I only downloading with 3,76 MB/s and I'm trying to watch V s02e08 (720p), but it is completely unwatchable, as I can see 30 sec, and the it buffers for 20 sec. Edit: Other information there might be required I'm running Windows Server 2008 R2, optimized for program performance. Windows is installed on a 60GB SSD. I have a 50 Mb/s internet connection and a 1 Gb/s LAN, all connected with Cat6 Ethernet cables. The MCE is using a Gigabyte EP35C-DS3R motherboard with 2 GB DDR2 ram. Edit 3: I have used chunk sizes for 128 KB Edit 4: I found this on newegg Pros: Enclosure for 5x2TB hard drive is fine. This is basically a rebranded San Digital TR5M-B product. For support Rosewill tells you to contact San Digital. No direct support from Silicon Image for the computer raid card. Cons: Includes computer Silicon Image 3132 raid card, extremely slow raid 5 write (our tests ~10MB/s). Compare to regular internal local drive write 30-60MB/s. We basically dumped the Sil3132 card and replaced with High Point RocketRaid 622 card for extra $69.99. Note for RR622, turn off ECRC (end to end CRC check) for card to work on IBM xserver. What took 12hrs to copy now took 2-3hrs. San Digital realized the problem and has the newer model TR5M-BP TowerRaid Plus that comes with High Point RocketRaid 622 card. Rosewill should discontinue this product and go with TR5M-BP. Could not get Silicon Image raid management software to work with complicated 2008R2 server with 10 NICs, application doesn't know how to talk to localhost port with all those NICs. No updates from Silicon Image and support from San Digital ignored. Gave up on Sil3132 card. Save yourself from a lot of headaches, get the RR622 card too if you are going to buy this product. Other Thoughts: The newer model is TR5M-BP TowerRaid Plus, comes with High Point RocketRaid 622 raid card for the PC instead of Silicon Image Sil3132. According to San Digital, raid 5 performance for Sil3132 read 80MB/s write 19MB/s, and RR622 read 154MB/s write 149MB/s. Our RR622 tests gave (8TB raid 5) write ~80-110MB/s copying 40GB file took 8mins. So I have now ordered a HighPoint RocketRAID 622 2P ext SATA III and hopes that it will solve my problems.

    Read the article

  • MySQL InnoDB disappeared, all InnoDB data cant be accessed

    - by dogmatic69
    Mysql (including InnoDB) was working fine, after a restart the other day when mysql starts it says in the logs: 140604 23:36:07 [Note] Plugin 'FEDERATED' is disabled. 140604 23:36:07 [Note] Plugin 'InnoDB' is disabled. In the app it says: SQLSTATE[42000]: Syntax error or access violation: 1286 Unknown storage engine 'InnoDB' Now, according to google this is a very simple fix, just remove the ib_logfile[0|1] files, which I have done and does not do anything. I started by making a full copy of the data dir for testing various 'fixes'. I have also uninstalled mysql and reinstalled it with no change, I just cant get it to run with innodb working anymore :/ # mysql --version mysql Ver 14.14 Distrib 5.5.37, for debian-linux-gnu (x86_64) using readline 6.3 I have also tried the innodb_force_recovery setting, 0 - 6, Any time I run a command on an InnoDB table it says innodb_force_recovery LOGS (from around the time it died) was working here Version: '5.5.37-0ubuntu0.14.04.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 140530 1:24:22 [Note] /usr/sbin/mysqld: Normal shutdown 140530 1:24:22 [Note] Event Scheduler: Purging the queue. 0 events 140530 1:24:22 InnoDB: Starting shutdown... 140530 1:24:24 InnoDB: Shutdown completed; log sequence number 3345857316 140530 1:24:24 [Note] /usr/sbin/mysqld: Shutdown complete 140530 22:03:12 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140530 22:03:12 [Note] Plugin 'FEDERATED' is disabled. 140530 22:03:12 InnoDB: The InnoDB memory heap is disabled 140530 22:03:12 InnoDB: Mutexes and rw_locks use GCC atomic builtins 140530 22:03:12 InnoDB: Compressed tables use zlib 1.2.8 140530 22:03:12 InnoDB: Using Linux native AIO 140530 22:03:12 InnoDB: Initializing buffer pool, size = 128.0M 140530 22:03:12 InnoDB: Completed initialization of buffer pool 140530 22:03:12 InnoDB: highest supported file format is Barracuda. 140530 22:03:15 InnoDB: Waiting for the background threads to start 140530 22:03:16 InnoDB: 5.5.37 started; log sequence number 3345857316 140530 22:03:16 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140530 22:03:16 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140530 22:03:16 [Note] Server socket created on IP: '192.168.1.20'. 140530 22:03:16 [Note] Event Scheduler: Loaded 0 events 140530 22:03:16 [Note] /usr/sbin/mysqld: ready for connections. 140602 0:58:39 [Note] Event Scheduler: Purging the queue. 0 events 140602 0:58:39 InnoDB: Starting shutdown... 140602 0:58:41 InnoDB: Shutdown completed; log sequence number 3345954467 140602 0:58:41 [Note] /usr/sbin/mysqld: Shutdown complete does not work anymore 140602 21:45:19 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140602 21:45:19 [Note] Plugin 'FEDERATED' is disabled. 140602 21:45:19 [Note] Plugin 'InnoDB' is disabled. 140602 21:45:19 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140602 21:45:19 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140602 21:45:19 [Note] Server socket created on IP: '192.168.1.20'. 140602 21:45:19 [Note] Event Scheduler: Loaded 0 events 140602 21:45:19 [Note] /usr/sbin/mysqld: ready for connections.

    Read the article

  • AMD Catalyst 13.9 installation failure

    - by Simon Verbeke
    Earlier today I installed Windows 8.1, and when I wanted to go into Catalyst Control Center, I noticed some odd error of CCC not being able to display options. I then figured I needed a driver update, so I downloaded the latest drivers, version 13.9, and tried to install them. While it was trying to install the display drivers, I got a blue screen. Tried again and got the same. Then I used an uninstall tool from AMD to remove all traces of my old drivers and tried to install the new drivers. Again, a blue screen. This is all I could think of to try. Would anyone know some other things I can try? EDIT: thought I might want to include the log entry for the crash: - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> - <System> <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" /> <EventID Qualifiers="16384">1001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2013-10-19T20:59:25.000000000Z" /> <EventRecordID>26587</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>Simon-PC</Computer> <Security /> </System> - <EventData> <Data Name="param1">0x0000007e (0xffffffffc0000005, 0xfffff80002a86dca, 0xffffd00025f250e8, 0xffffd00025f248f0)</Data> <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data> <Data Name="param3">101913-8953-01</Data> </EventData> </Event> Another edit: As it turns out, the graphics card isn't showing up any more in the device manager. But as far as I can tell, it is still working (the fans are spinning and my screen is plugged into that graphics card). This is solved. it appears that my graphics card is now running with a default windows driver. I also tried the forced method mentioned here: AMD Graphics Drivers won't install properly . But I still get a BSOD. Third edit: Slight succes! Managed to install version 13.4. Everything appears to be working fine now. I think I'm just going to skip version 13.9.

    Read the article

  • MySQL reserves too much RAM

    - by Buddy
    I have a cheap VPS with 128Mb RAM and 256Mb burst. MySQL starts and reserves about 110Mb, but uses not more than 20Mb of them. My VPS Control Panel shows, that I use 127Mb (I also running nginx and sphinx), I know, that it shows reserved RAM, but when I reach over 128Mb, my VPS reboots automatically every 4 hours. So I want to force MySQL to reserve less RAM. How can i do that? I did some tweaks with my.conf but it helped not so much. top output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 15 0 2156 668 572 S 0.0 0.3 0:00.03 init 11311 root 15 0 11212 356 228 S 0.0 0.1 0:00.00 vzctl 11312 root 18 0 3712 1484 1248 S 0.0 0.6 0:00.01 bash 11347 root 18 0 2284 916 732 R 0.0 0.3 0:00.00 top 13978 root 17 -4 2248 552 344 S 0.0 0.2 0:00.00 udevd 14262 root 15 0 1812 564 472 S 0.0 0.2 0:00.03 syslogd 14293 sphinx 15 0 11816 1172 672 S 0.0 0.4 0:00.07 searchd 14305 root 25 0 7192 1036 636 S 0.0 0.4 0:00.00 sshd 14321 root 25 0 2832 836 668 S 0.0 0.3 0:00.00 xinetd 15389 root 18 0 3708 1300 1132 S 0.0 0.5 0:00.00 mysqld_safe 15441 mysql 15 0 113m 16m 4440 S 0.0 6.4 0:00.15 mysqld 15489 root 21 0 13056 1456 340 S 0.0 0.6 0:00.00 nginx 15490 nginx 18 0 13328 2388 992 S 0.0 0.9 0:00.06 nginx 15507 nginx 25 0 19520 5888 4244 S 0.0 2.2 0:00.00 php-cgi 15508 nginx 18 0 19636 4876 2748 S 0.0 1.9 0:00.12 php-cgi 15509 nginx 15 0 19668 4872 2716 S 0.0 1.9 0:00.11 php-cgi 15518 root 18 0 4492 1116 568 S 0.0 0.4 0:00.01 crond MySQL tuner: >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering Please enter your MySQL administrative login: root Please enter your MySQL administrative password: -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.0.77 [OK] Operating on 32-bit architecture with less than 2GB RAM -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 1M (Tables: 1) [OK] Total fragmented tables: 0 -------- Performance Metrics ------------------------------------------------- [--] Up for: 38m 43s (37 q [0.016 qps], 20 conn, TX: 4M, RX: 3K) [--] Reads / Writes: 100% / 0% [--] Total buffers: 28.1M global + 832.0K per thread (100 max threads) [OK] Maximum possible memory usage: 109.4M (42% of installed RAM) [OK] Slow queries: 0% (0/37) [OK] Highest usage of available connections: 1% (1/100) [OK] Key buffer size / total MyISAM indexes: 128.0K/64.0K [OK] Query cache efficiency: 42.1% (8 cached / 19 selects) [OK] Query cache prunes per day: 0 [!!] Temporary tables created on disk: 27% (3 on disk / 11 total) [!!] Thread cache is disabled [OK] Table cache hit rate: 57% (8 open / 14 opened) [OK] Open file limit used: 1% (12/1K) [OK] Table locks acquired immediately: 100% (22 immediate / 22 locks) [!!] Connections aborted: 10% [OK] InnoDB data size / buffer pool: 1.5M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries When making adjustments, make tmp_table_size/max_heap_table_size equal Reduce your SELECT DISTINCT queries without LIMIT clauses Set thread_cache_size to 4 as a starting value Your applications are not closing MySQL connections properly Variables to adjust: tmp_table_size (> 32M) max_heap_table_size (> 16M) thread_cache_size (start at 4) I think if I do what MySQLtuner says, MySQL will use more RAM.

    Read the article

  • How do I make an external hard drive keep the same drive letter permanently?

    - by andygrunt
    I have a desktop PC (2002 vintage) running Windows XP that I turn on about 2 or 3 times per week. I have a mains powered 250Gb Western Digital hard disk connected to it via USB. I always turn the hard disk on before the PC so it's up and running as the PC boots. When I first connected the external hard disk, the PC assigned it a letter ('i' if it matters) and I've installed software to it, created shortcuts to various files and folders on the disk using that letter. For years everything was fine then I would boot the PC and the hard disk was assigned a different letter. I'd then have to go into 'my computer/manage/disk management' and manually change the letter back to 'i'. If I then rebooted the PC, the hard disk would usually still be 'i' but after the next reboot would be some other random letter and I have to manually change it back to 'i'. This would go on for some time then there'd be periods when the it would always be 'i' then, for no apparent reason (no new devices added, for example), the drive letter would start changing again. At the moment it's in random drive letter mood so I thought I'd ask the following question... How do I assign the external hard disk to be 'i' permanently? Answer: Thanks Molly that seems to have done the trick (after a little fiddling) - slightly disappointed there wasn't a way to do it within Windows without installing something else though. For anyone else trying this, it wasn't completely straightforward so here's what happened with me. I installed USBDLM as per the instructions on its website. I guessed that I had to assign the first USB letter to i so replaced the 'Letter1=' lines to 'Letter=I' in the ini file. To test it, I rebooted the PC only to find it came back up with the display set to 640x480 in 16 colours. After some investigation, I re-installed the display drivers and rebooted and set the display back to its usual setting. The external hard disk now gets set to 'i' but I found I had to re-apply sharing status to it so it was seen from my laptop which is on the same network. The end result of all this is that it now does what I wanted although it does act as though the hard drive has just been plugged in a few seconds after the Windows desktop appears i.e. the little box appears with a progress bar as it searches through the contents of the 'new' hard drive and I eventually get a dialogue box saying 'This disk or device contains more than one type of content. What do you want Windows to do?' and lists options such as play media files, print the pictures or open folder to view the files. This is a tiny pain I wish didn't happen but not exactly a huge price to pay. Other than that - it seems to work fine :) Looks like a spoke too soon... Every time I reboot, I have to re-share the 'i' drive (which I didn't have to do before) so it can be seen by my laptop on the same network. Any ideas how to make that permanent?

    Read the article

  • Windows 7 is stuck at "Starting Windows" when I attempt to boot computer

    - by Eli
    Basically, whenever I turn on my computer, it gets to the Starting Windows phase and just stays there. The startup animation still plays, yet it gets nowhere. I have tried booting into safe mode, however it gets stuck at loading CLASSPNP.SYS. It then freezes there and doesn't continue booting. I have tried booting into recovery mode from the hard drive, and it freezes after displaying the background image. I have tried booting from a recovery CD, which works, and I was able to use system restore. However, using system restore did not fix it, and it still is stuck at the Starting Windows screen. I have tried booting a Windows CD (Windows 8 Retail Installer) to see if I could upgrade it to fix this issue, however that froze at a blank screen after it got past the boot logo. I have tried changing around the BIOS settings (including resetting), to no avail. I have tried re-plugging the internal PSU cables (this is a custom-built desktop), yet this has changed nothing. I can boot into a loopback Ubuntu install on the same drive, which works fine, other than the fact that it has issues with some of the USB ports and the network card. This system has worked fine for the past few months, completely stable, and nothing in the configuration has changed before this error started happening. Startup Repair on the Windows recovery CD doesn't find any issues. Unplugging my secondary hard drive or swapping around memory doesn't change anything. The hard drive itself is fine, it hasn't shown any signs of failure and once again, boots my other OS fine. If anyone could help with this, that would be great. I can't seem to find any possible solution to this. If it makes any difference, my system specs are as follows: AMD FX-8320 Gigabyte GA-970A-D3 4GB of DDR3 Radeon HD 6870 550w PSU I'd like to not have to reinstall Windows, for I have more than a terabyte of data that I would have to back up if that becomes the only option. EDIT: I have since tried the following: Tried the solution involving restoring files from RegBackup, which changed nothing. Tried testing everything with Hiren's boot CD, everything comes back as fine. Tried disabling everything unnecessary in the BIOS and unplugging everything unneeded, it still hangs. Tried swapping out every possible combination of RAM, it still has the same result. The RAM is not at fault it seems Tried every GPU I own (which is many!) and it still hangs at the exact same place. Tried minimizing the power consumption as much as possible, even using an old PCI graphics card. It still hangs at the same place in the same way, signifying that it's not the PSU at fault. Tried resetting the BIOS again, still nothing. Tried every possible combination of BIOS options, even downclocking everything, it still hangs in the same spot. Tried upgrading the BIOS from version FB to FD, which changed nothing. Based on this, I would conclude the motherboard to be at fault. Are there any other possibilities? I don't want to spend $150 for a new motherboard. EDIT 2: This is what it gets stuck at when I try to boot into safe mode: Note the slight graphical corruption at the top of the screen. No matter how I set up the system, this seems to be there. In addition, either it has stopped booting into safe mode now, or it takes upwards of 2+ hours, and I haven't left it running for that long.

    Read the article

  • Monitor randomly shutting down, computer accepting no input, need to restart to get working

    - by Sebastian Lamerichs
    First off, spec list: OS: Windows 7 Ultimate 64-bit SP1 CPU: i7-4820k @ 3.7GHz (stock) GPU: Two 3GB Radeon HD 7970s @ 1.05GHz Mobo: AsRock X79 Extreme6 HDD: 2TB Seagate Barracuda 7200rpm RAM: 16GB quad-channel Kingston 1600MHz PSU: Antec HCG 900W Monitors: Acer S220HQL 1920x1080 + ViewSonic VA2251 1920x1080. Plugged into different GPUs. My problem is that, on a daily-ish basis, my monitors will turn off and not turn back on. My computer will still be running, GPU/CPU/case fans all still going, but the monitors will not turn back on. Additionally, it seems to cease all network activity. It doesn't seem to log any errors at all. I've verified that this is not a monitor issue, as when I press the num/caps/scroll lock buttons on my keyboard, the lights don't change, so the computer is clearly not accepting input. I have noticed a few other people on the internet with this problem, and some have claimed that it was solved by disabling PCI-Express Link State Power Management, but the issue still occurs for me after this. Whilst my CPU and GPUs both run at 100% 24/7, the temperatures are certainly not at dangerous levels, with the CPU averaging 65°C and the GPUs at 70°C and 78°C average. All components are brand new. I have tried forcing MSI Afterburner to start when Windows starts and to force a constant voltage, as this fixed the issue for a few days for another user, but he reported back saying that it had stopped working properly again, so I'm not putting too much faith in this working. Many people have said to adjust display sleep mode settings, but this will clearly not work, as the keyboard lights would still work if the monitors were the issue. The closest I can get to a log file for this issue is the following Folding@Home logs: 14:45:21:WU01:FS00:0x17:Completed 1120000 out of 2000000 steps (56%) 14:46:43:WU00:FS01:0x17:Completed 480000 out of 2000000 steps (24%) 14:46:49:WU01:FS00:0x17:Completed 1140000 out of 2000000 steps (57%) 14:48:30:WU01:FS00:0x17:Completed 1160000 out of 2000000 steps (58%) 14:49:55:WU01:FS00:0x17:Completed 1180000 out of 2000000 steps (59%) As you can see, the second GPU (FS01) stops computation approximately three and a half minutes before the issue occurs (it should be completing 1% every 80-120 seconds), and the first GPU (FS00) continues for a few minutes more before the logs just end. As far as I can tell, the computer has a network failure at the time the first GPU stops working, the latest IRC message I received from this time was at 14:47:58. That being said, there could have just not been any messages between then and 14:50:00, so I'm going to be connecting a laptop to the same bouncer to double-check if it happens again. The GPUs functioned perfectly well in another computer for a significant period of time, so I'm fairly confident that they aren't the issue, which means that this is being caused by either software or the motherboard, or possibly RAM. I really hope it's software. I heard from a forum board that there was a patch from Microsoft that fixed this problem, but "I've forgot which KB it was or the google search terms I used to find the patch, LOL.", so that's not much help. Haven't seen it mentioned by anyone else on about a dozen threads about this issue either. The computer is plugged in via a surge-protected power board, and I've run several other computers and pieces of hardware through it with no issues, so that is not the cause. I have just set the hard disk to never turn off, although I don't believe that that will solve the issue. Strangely, this has only happened when I'm not at the computer (which is actually a minority of the time). Until today it had only happened when I had not been actively using the computer for 6 hours, but today it happened within 10-30 minutes of me last using the computer actively. I have enabled file logging from MSI Afterburner, so hopefully this will shed some light on the issue, but I'm not too optimistic. I've heard that it could be a motherboard problem, but I figured I should ask around before RMAing it. Any help?

    Read the article

< Previous Page | 876 877 878 879 880 881 882 883 884 885 886 887  | Next Page >