Search Results

Search found 58734 results on 2350 pages for 'windows batch'.

Page 885/2350 | < Previous Page | 881 882 883 884 885 886 887 888 889 890 891 892  | Next Page >

  • Lenovo t400 laptop docking station with DVI out shows green artifacts when connected to monitor

    - by Roy Rico
    I have a Lenovo T400 laptop, with Windows XP. I have a docking station connected via DVI to my Samnsung monitor. I'm connected at 1920x1200 resolution and I keep seeing all these green dots (when colors are supposed to be near black). It's really bad. I have tried running on my Samsung monitor, at all sizes, even down town 1280x1024 like my monitors at work. When I use the docking station at work, I am able to connect 2 1280x1024 NEC monitors (one via DVI, one through VGA, both through my docking station). I have absolutely no issue there, both displays work great. I have tried to update the drivers, I've even installed the latest video drivers from lenovo's site (DEC-02-2010). Is anyone familiar with this issue? Details: Docking Station: Lenovo Advanced Mini Dock- 250410U - NIB Montior at home: Samsung T240 24-inch monitor Monitors at work: NEC monitors

    Read the article

  • Best Small Linux Distribution for rDesktop

    - by d2jxp
    What would be the best linux distribution to use just for the purpose of rDesktop? We're trying to decide if we should get rid of old computers or just use them as thin-clients to connect to virtual Windows 7 machines on our network. I would like something with as little bloat as possible and can be run from a USB flash drive. I have tried SliTaz, ThinStation, and Pixil from Century Software. SliTaz has been my favorite so far but I still want to know if there's something better that's also easily customizable.

    Read the article

  • what the best simple video editing program? [closed]

    - by Itay
    Possible Duplicate: What is the easiest video editing program to use on Windows hi, i want to edit videos, i'm looking for a good, premiere like software. but it seems premiere it self is too much for me... frankly i can see how those settings can be helpful for any one.. but it doesn't matter. i've just imported an HD video from my new camera (CS4), first, it cut most of the video, and second, it actually made the quality worse... i've tried a few free, programs, but as soon as i've seen the GUI of those, i closed them... i really like premier, but i honestly don't understand who needs all this PAL/DV stuff... is there any similar application that intend to more intermediate users? tahnks.

    Read the article

  • Chassis fans and power LEDs still work in Hibernate

    - by Jaded
    I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

    Read the article

  • Is it bad to put your computer in sleep mode every time? [closed]

    - by Ivo Flipse
    Possible Duplicate: What is the effect of always sleeping a laptop? Is it bad for batteries or something else? Often I have a lot of stuff open and don't feel like shutting down my laptop, so I just use sleep mode when I'm transferring it. But I have no idea if this might have any disadvantages. So my question is: is it bad to put your computer in sleep mode every time? Things I'm wondering: Should I turn off my computer every once in a while? Will continuous use of sleep mode slow down my system in any way? Are there any bad side effects (in the long term)? Any thoughts? FYI I'm using Windows 7 on a laptop

    Read the article

  • Where is the network connection enabled/disabled setting stored?

    - by minerj
    I have an Amazon EC2 instance of Windows Server 2008 where some genius managed to disable the network connection so that the instance is now isolated in its own little universe. I can shut down the instance and edit the "C:\" drive volume by attaching it to another running instance. This is equivalent to removing the system drive from a dead machine and attaching it to another computer to edit the files. Question: Where is the network connection enabled / disabled setting stored? If I can tweak this setting by editing the registry or a file to re-enable the network connection, I can then resurrect my Amazon server.

    Read the article

  • Can you link an NTFS junction point to a directory on a Network Attached Storage?

    - by Zachary Burt
    I'm using Windows, and I want to use Dropbox to back up a folder outside my Dropbox directory. So I want to create a junction point from my target directory to my Dropbox folder. Accoding to the Wikipedia article on NTFS junction points, which the Dropbox answer links to: "Junction points can only link to directories on a local volume; junction points to remote shares are unsupported." I am looking to link to a directory on networked attached storage, which would not be a local volume, I believe. What should I do?

    Read the article

  • Two VPN (internet) connections rounting (win2003)

    - by tmp3128
    Here is my setup: - win2003 server (ISA installed) with 3 NICs:   1) internal network   2) ISP 1 (default) network (DHCP enabled)   3) ISP 2 (backup) network (DHCP enabled) - several "normal" PC within internal net - one "special" PC within internal net Both ISP 1 and ISP 2 provide access to internet and their resources thru their VPN connections. The goal is to enable all "normal" PCs to use internet from ISP_1's VPN connection and "special" should use only ISP_2's VPN connection. Futhermore all "normal" and "special" PCs should have access to several servers accesible only thru ISP_2's VPN connection. I have some thoughts how to achieve this but I want to be certain because everything should be configured as quickly as posible, avoiding significant downtime. windows-server-2003 isa routing vpn

    Read the article

  • Bluetooth radio device is not available

    - by Mike
    I reinstalled my Windows 7 operating system, and have since been unable to detect my Logitech m555b bluetooth mouse. Here is some info about my system: I have have a working connection with a bluetooth printer. I have a message in the "My Bluetooth" section of explorer stating "Bluetooth radio device is not available". The Device Manager indicates that the Generic Bluetooth radio is working correctly. The bluetooth "F12" switch is on. Mouse batteries are new and the right way around. I'm presuming that I need a bluetooth driver which is non generic. The computer is a Clevo P150HMx (the version with the GTX485 GPU) with the default WLAN / bluetooth combo card manufactured by Realtek (I think it's a Realtek RTL8188CE card). I think I have the drivers installed, but I still get the generic driver in the Device Manager. I'm confused. Please help, I'm going mad on the touchpad. (Thanks for the touchup wizlog)

    Read the article

  • 'server was unable to allocate from the system nonpaged pool' error

    - by cop1152
    Currently users at my company are unable to access their home folder (or any folder on our domain controller). I am working remotely and cant physically access the machine until tomorrow morning, but I can access it with RDC. When I attempt to ping other machines on our network from the machine in question (connected with RDC), I immediately get the error PING: transmit failed. error code 1450. Event Viewer is full of 2019 errors: The server was unable to allocate from the system nonpaged pool because the pool was empty Does anyone have experience with this specific issue? I have found some info with Google, but would like to hear what the pros at SF have top say. This is a Windows 2000 server.

    Read the article

  • Spam just keeps on coming

    - by Campo
    I administer a Windows Server 2003 with Exchange 2003 as well as GFI installed. I am watching the GFI dashboard and every third email is spam. Not only that it goes to a non existent address then the [email protected] sends out an NDR to the sender. Should I be worried about this? I know it is directory harvesting but we have directory harvesting turned on in GFI and I do see it is working but obviously doesn't work for emails that don't exist. My issue is I would turn off NDR but then people who legitimately mistype and email address to our domain will never know their email did not get to the recipient. What do others do to combat spam? Is 3 times the amount of spam to ham normal? We filter out 90% of the spam but some does get into the users inbox. Thanks for the suggestions and advice!

    Read the article

  • W3SVC service stopping error

    - by Ashian
    Hi, I have a web server ( IIS 7.5 , windows 2008 64 Bit web server ed) and notice that in last few days all web sites on server stopped and cant browser by visitor. I check the event log but I didnt see any things related to this problem. When I try to restart IIS i got error on W3SVC serivce.When IIS try to STOP it, W3SVC goes to stopping state and never stop. so I can't start it again. I try and find that I never can restart the W3SVC and when IIS work fine if I try to restart this service, it goes to stopping and never stop. 1- how can I find the problem on IIS? ( i have several asp.net app host on it ) 2- how can I fix W3SVC service stopping problem? Thanks Mehdi

    Read the article

  • AMD Radeon 7900 series: setting up 3 monitors

    - by Nilzone-
    I have an AMD Radeon 7900 series, which should support up to 6 screens. I'm having problems getting my third one working. Im running windows 8, and have installed all the latest AMD drivers. My screens are: Samusng syncmaster S27D391HS Samusng syncmaster S24B350H Samusng syncmaster S24B350H The first 24" monitor I use HDMI to DVI cable. The second 24" I use VGA to DVI cable. Lastly, for the 27" I use HDMI cable. The result is, no matter what I do, I never get more than two screens on simultaneously. I have also tried getting a DisplayPort to HDMI cable to use for the 27", but Im not sure if it was passive or active (didn't say on the box, nor did I ask). So my question is: is an active displayport to HDMI the solution, or is there someting else Im overlooking? (I have read similar posts on this subject, but I use a slightly different combo of cables. That is why I made a post of my own as well)

    Read the article

  • PC won't boot / USB and PS2 keyboards don't work

    - by Truncheon
    My brother's PC has stopped working. He now cannot boot into windows, and he can't access BIOS by pressing the DEL key as no keyboards work. He has tried 4 different keyboards, one of which is PS/2. He tried the USB keyboards on all the USB ports. I don't know why the BIOS would show the message "Floppy disks fail (40)", as there is no floppy disk drive in the PC. He has upgraded from XP to Vista (yes that's right, upgraded keeping the XP drivers, eyes roll). A BSOD occurred in Vista while he was browsing files. What steps should be taken to troubleshoot the problem?

    Read the article

  • RabbitMQ message broker unable to open unused port 61613

    - by mjn
    On a Windows Vista system, RabbitMQ fails to open port 61613 which is not used (as netstat and TCPView show). The server log indicates that it is possible to bind port 5672, but the next lines show the problem with port 61613. I have cleared all firewall settings and rebooted. Several times in the past this helped to solve the problem. But as the problem frequently reappears, I would like to know if there is somthing I am missing to solve its root cause. =INFO REPORT==== 29-Jun-2013::12:09:16 === started TCP Listener on [::]:5672 =INFO REPORT==== 29-Jun-2013::12:09:16 === started TCP Listener on 0.0.0.0:5672 =INFO REPORT==== 29-Jun-2013::12:09:16 === rabbit_stomp: default user 'guest' enabled =INFO REPORT==== 29-Jun-2013::12:09:16 === started STOMP TCP Listener on [::]:61613 =ERROR REPORT==== 29-Jun-2013::12:09:16 === failed to start STOMP TCP Listener on 0.0.0.0:61613 - eacces (permission denied) =INFO REPORT==== 29-Jun-2013::12:09:16 === stopped STOMP TCP Listener on [::]:61613

    Read the article

  • Win 2003 STD network adapter always showing DHCP when in static IP configuration, + it loses the DNS

    - by Darragh
    Hi, I have a server that after the first configuration it was DHCP, now I have added it to our domain and in a static IP, however after a few moments it returns to DHCP but with only some of the IPv4 setting staying the same, It loses DNS for example. I'm not sure what is causing the problem but all I know is this started to happen after I added it to the domain, Would it be a domain policy? or the NIC drivers Spec; Dell M605 Blade server Windows 2003 STD SP1 Intel Xeon Quad core NIC: Dual embedded Broadcom NetXtreme IITM 5708 Gigabit Ethernet NIC w/ TOE

    Read the article

  • How can I use 2 monitors plus laptop with my Dell e6420 w/ Nvidia nvs 4200m

    - by KallDrexx
    I have just hooked up a 2nd external monitor to my Dell e6420 laptop with a Nvidia NVS 4200m graphics card, running Windows 8 64 bit. However, the computer won't let me have both monitors and the laptop display active at the same time. I installed the latest Nvidia graphics drivers (310.70) but it claims that my GPU can only support up to 2 monitors. Nivdia's website implies differently (as does various other laptops around the office). The monitors are connected both via DVI to my dell docking station that has multiple DVI ports. Both monitors are working correctly, I just can't get all 3 working together. Attempting to download the driver from dell fails, as their driver installer is broken apparently Any ideas?

    Read the article

  • AutoHotkey media button for the NextSong button on Pandora

    - by Christian
    I tried doing the same thing that had been advised to do on the Play/pause pandora.com with a media key answer page. I simply replaced the XXX with 119 after running GetMediaKey - instead of 122 (it was same for me), which worked just fine for its play/pause purpose. I also replaced the YY with 11 since it was the appropriate (and next) tab. It does put the small, orange, dotted square around the next song button, but instead of going to the next song, it just acts like play/pause. Is there another modification required? Using Google Chrome in Windows 7 on an Alienware m14x r2.

    Read the article

  • Print Preview Blank IE8

    - by Ben
    On a Windows XP, in IE8 print preview always appears completely blank except for header information. I can open the generated temp file in firefox and print it from there. I have tried browsing without addons to no success. I have tried re-creating the "%TEMP%\low" folder as described on the web, e.g. here: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/ie8-printing-does-not-work-preview-empty/920588e5-ccc4-4e24-83d6-606d5e3b1c70 ... all with no success.

    Read the article

  • Can't find second partition on encrypted drive with two partitions

    - by Thomas Uhrig
    I have a drive with two partitions, a system partition (Windows 7) and a partition just for data. Both are encrypted with the same password. I didn't had any problems, but yesterday my laptop gets broken. Now, I'm trying to connect the drive via USB to a new laptop and read it. The problem is, that I only see the system partition, not the one with my data. When I click on "Select Device", I can see my drive as "Harddisk 1" with 300 gb. But I only see a single partition "Partition1" with 117 gb. I'm unable to find the second one. It's not a hidden partition. Any ideas? Thanks.

    Read the article

  • BITS http download job fails to connect for owner Local SYSTEM account

    - by MikeT
    A service I have written that uses BITS (Background Intelligent Transfer Service) to auto update itself is having a problem on some machines (Windows 7 so far). I have been investigating and have discovered that some of the jobs that my service adds to the bits queue are failing immediately with the error code 0x80072efd (a connection with this server could not be established). The is not problem with connecting to the server for the download as it works fine on the same machine using IE (or any other web browser) and other clients can connect and update from the same server. I tried using the BITSADMIN.exe tool to add the jobs manually and they worked ok. I then changed the account my service was running under to the network service account so the bits jobs would be created with a different owner and the jobs completed successfully. My question is I don't want to run my service as this account as it wont have the required local permissions, so how to I change the permissions of the local system user to allow it to download from the HTTP source, I'm not aware of any way of this being restricted for this account but it obviously is.

    Read the article

  • error 0x80070522. not able to create a file in c:\ directory

    - by Abbas
    Hello Everybody... "error 0x80070522. not able to create a file in c:\ directory" One of our customers has just found a problem when trying to create a file on the root of the C:\ Drive, on a Windows 7 Professional PC. I know they shouln't be keeping files here, but there is a valid reason in this case, so I've relaxed the security on the root of C:\ by giving the group 'users' modify permission. Before I relaxed the security, the user was receiving 'access denied', but now they are receiving the message: An unexpected error is keeping you from creating the file. If you continue to recieve this error, you can use the error code to search for help with this problem. Error 0x80070522: A required priviledge is not held by the client. Googling for this suggests that it is caused by UAC, but how can I get round this when the user doesn't have admin rights on their PC? So did you find a solution for this issue ?? Please its urgent to my accountant software..

    Read the article

  • Can I directly open an MMF Cash Drawer through RJ-11 port?

    - by roviuser
    My aunt bought this cash drawer at an auction recently and has tasked me with figuring how to open it via a computer. We have the key (pictured) and can open it manually, but I'd like to be able to plug it directly into a computer and open it via some sort of program or script. It has a built in rj-11 cord coming out of the back of it. Initial research shows that it might usually be used with a printer, but I want to be able to connect it directly to the computer. Edit: this needs to be able to work with windows 7. Edit2: http://imgur.com/a/czEMs imgur gallery of the innards.

    Read the article

  • Can't see any YouTube videos

    - by André
    I have a problem with watching YouTube videos. It says: "An error occurred, please try again later". I've tried loading different videos and that's what it says to all the videos I try to watch. I've tried using another browser, clearing cache + cookies etc, but none of that really worked out. My operating system is Windows 7 Home Premium, I use Google Chrome as my browser. And the YouTube videos was able to be watched earlier. I suspect that it has something to do with the PC, since I've got YouTube working on my laptop earlier. Not sure if it still works on my laptop though. Hope I've given enough information for you to help me out with this problem. Feel free to ask if there's anything else you need to know. Anyone who can help me out?

    Read the article

  • data recovery from unallocated harddisk partition

    - by user42151
    Hi I accidentally deleted a partition which mainly served as space I put my data, labeled D: drive. The partition wasn't subsequently formatted though, following the delete incident. Obviously the D: drive doesn't show up as it usually does when I run Windows 7. In the "Computer Management", on clicking the Disk Management I clearly see the space is now labled as unallocated. question: How do I go about recovering my data. Perhaps what the effective data recovery software I can use to resolve this issue. Thanks

    Read the article

< Previous Page | 881 882 883 884 885 886 887 888 889 890 891 892  | Next Page >