Search Results

Search found 4580 results on 184 pages for 'what is faster'.

Page 89/184 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• JFFS2 poor mount performance

  - by Marcin Polkowski

  I run multiple ARM boards with Debian Linux installed. Board is equipped with 512 MB of NAND memory. I've observed that after ~3 months of continuous run booting time increased significantly - it takes over 3 minutes to mount filesystem (JFFS2). System was using about 35% of available storage so I’ve removed unnecessary files (got to ~18%) but this didn't change anything. Then I realized that my software produces directories that are left empty so I’ve removed ~500 empty and unnecessary dirs. This didn’t help either. After system is started I see JFFS2 garbage collector (jffs2_gcd_mtd4) running and occupying over 90% of CPU. Now my question: is there a way to „optimize” JFFS2 filesystem for better performance - faster booting (my system have limited timid to boot up)? It would be great if this optimization could be done remotely - I have no physical access to boards.

  Read the article

• How can I use the proxy settings on Epic privacy browser to log on to Facebook?

  - by EddieN120

  I love the Epic privacy browser because it is built from the ground up to enhance privacy. It's built on Chromium but because it has stripped out all code that tracks users across the Internet, pages load faster and things work snappier. With one click you can enable a proxy to hide your IP address, sort of like Chrome's "Incognito" mode on steroids. But there's a problem: if I load Epic, go to facebook.com, log in, and then click the proxy button, I can use Facebook for a while. But eventually, Facebook would throw up an error screen, saying that it thinks that my account has been hacked, and then it would make me verify my identity, force me to change my password, etc. I've had to change my password four times in as many days, which is very annoying. Now I turn on the proxy for browsing on to every other site but Facebook. Question: how can I use the proxy settings on Epic privacy browser to successfully log onto and use Facebook?

  Read the article

• Fan is spinning too fast just in Windows - software?

  - by B. Roland

  I've recently replaced my fans (CPU, GPU, and bought a CHA fan). The GPU remained the same, but I've seen it when it was spinned 2 times faster, than it usual... but it is rarely. The problem is, that the CPU fan in Windows (especially 7) spinned too much, 'cos it keeps in under 40°C, and it is spinning with 3300-3600 RPM, which is too high I think. If I swich to Ubuntu, it keeps on ~40-45°C with with 2500-2800 RPM, which is a big difference in numbers, and in noise. I'm looking for a manual fan control solution, or just reduce the Windows' multipliers of fan speed control, somehow... I was bought the new fans because of the lower noise (and it does it, but not with 3.6k RMP). Thank you!

  Read the article

• Is (Ubuntu) Linux file copying algorithm better than Windows 7?

  - by Sarath

  Windows Copying is a real mess ever since Windows Vista. Even Microsoft claims they've improved the performance, from a user perspective, it's not quite visible. Even with single file the copying window appears too much time for 'Calculating' and then finishing the copy(Even after 100% completion some times the dialog remains active). At the same time, I was backing up some files in Ubuntu Linux. I felt it's really fast. Might be a feeling caused by faster UI updates. I read an informative post from Jeff Atwood few years back on Windows File Copying. but what my specific questions are Is (Ubuntu) Linux file performance is better than Windows-7? Are both algorithms, Windows and Linux is making use of multiple threads and pipelining mechanism to improve the speed? If yes, which one is better?

  Read the article

• Free / Cached / Available memory on Linux

  - by pkoraca

  I have read that linux uses free memory for caching, to make system faster. However, both Nagios and Paessler PRTG monitoring system show me that my memory usage is critical. I could change Nagios mem_usage script to sum free and cached memory, but would that be correct information? I doubt that they misunderstood Linux memory usage. Lets say I have 8 GB RAM. 5 GB are used, 2 GB is cached, and I have 1 GB of free memory. Real available memory should be free+cached (3 GB)? If some new application would need additional 3 GB RAM, could it take everything from cache and free without using swap, or is there a minimum that should be in cache? Real example: $ cat /proc/meminfo MemTotal: 5984256 kB MemFree: 137052 kB Buffers: 140484 kB Cached: 3439616 kB SwapCached: 244 kB Active: 3148824 kB Inactive: 2341768 kB ... My monitoring tools show that I have 137 MB free RAM, however I have ~3,5 GB in Cache. Thanks!

  Read the article

• DNS Resolver Speed Techniques

  - by Rob Olmos

  I recently received a reply to my concerns about some DNS servers being slower than others despite all servers being anycast: In practice, most resolvers won't be impacted by the slower paths to some of the name servers in the set. Most resolvers employ various techniques to provide fast lookups, such as preferring name servers that were previously seen to be faster, sending simultaneous queries to multiple name servers, or pre-fetching queries before the TTL has expired. I was not aware that resolvers used these techniques and I was unsuccessful at searching for more info about this. Are there any names for these techniques? Which resolvers employ which of these techniques?

  Read the article

• Moving folders take long in windows 7

  - by acidzombie24

  What can i do to fix this? maybe drop permission properties? maybe not. I have a large folder with 100k files. I moved it into my archive folder and its taking forever to move. Why is that? I know on XP it takes <1sec but not on windows 7. I am sure its a permission thing, is there a way i can disable it and make it faster?

  Read the article

• When is it time to buy a new hard drive, and what considerations go into buying a new hard drive?

  - by user1125620

  I've had my current hard drive for about 4-5 years now, and I've never had a problem with it before, but now it's making whirring noises. It's done this before and, last time, the noise did go away the next day, but I have accumulated quite a bit of information that I wouldn't want to lose on the drive. HD Tune Pro and Berlac Advisor both said the drive was healthy, and I wouldn't want to get a new one unless it was absolutely necessary or was going to show drastic performance improvements. My only knock against the drive would be that Visual Studio takes longer to load than I'd like it to. HD Tune Pro says the average read speed is 54.3MB/s. I'm not sure if that's good or bad, but it seems about average compared to similar drives on http://www.hdtune.com/testresults.html. Model #: WDC WD5000AAJS-22YFA0 So, should hard drives be replaced after a certain amount of time? Has mine reached that point? Would a new hard drive be any faster?

  Read the article

• How do I pick a motherboard?

  - by EpsilonVector

  When building your own computer one part was always a mystery to me: the motherboard. Picking a CPU/GPU/memory is easy- you just figure out where the various chips are in the low end to high end scale, do a little market research on what current games demand, and pick the parts from their respective continuums of low-to-high-end models. A mother board is more complicated though. Its features are not as obvious as "this motherboard is faster than that motherboard". Now you need to deal with part compatibilities, bus speeds, maybe power management stuff, etc. I'm interested in a short guide for selecting a motherboard, especially- what pitfalls to avoid (for example, can bus speed become a bottleneck?). To clarify: I'm not looking for motherboard recommendations. I'm looking for guidance regarding how to evaluate the fitness of a motherboard given the rest of the computer parts.

  Read the article

• How to reliably run a batch job every 5 seconds?

  - by Benjamin

  I'm building an application where the sending of all notifications (email, SMS, fax) will be asynchronous. The application will write the notifications to the database, and a batch job will read these notifications and send them with the appropriate transport. I was first reading at ways to run cron faster than the minute, and realized this was a bad idea. The batch scripts are written in PHP, and I guess that writing a proper daemon would be quite an overhead (though I'm open to any suggestion, as PHP car run indefinitely as well). What I have in mind is a solution that would: Run the PHP script every 5 seconds Check that the previous run has finished, or abort (never 2 concurrent batches running) Kill the script if live for more than x minutes (a security in case it hangs) Start with the system (if a reboot occurs) Any idea how to do this?

  Read the article

• Select firefox search result

  - by Nicolas C.

  I am working on a daily basis on a web application with very large menus. Also doing lots of other Excel manipulations, copy and pasting, etc., I am quite fond of keyboard shortcuts as much faster than using the mouse to point, double-click and then going back to my keyboard etc. Hence, my question is quite simple, does anyone know if there is any shortcut under Firefox which would let me actually select (and not highlight) in my web page the search result so that I can for instance do the following manipulation sequence? [Ctrl]+[F] type the search string, for instance 'regional_unit' the missing shortcut to actually select in my page the string which is currently highlighted thanks to the search feature of FF [Space] or [Enter] key to activate the web element which in my case would systematically correspond to a link or button, etc. May be there would be an addon replacing the default search feature, I don't know... I tried to look over the internet but with the words I am using for this investigation, I do not get relevant search results under Google :(. Thanks a lot

  Read the article

• Using a CF card as an IDE HDD

  - by dartacus

  I have an old Sony laptop (Vaio TR1-MP) that I like. The HDD has died and since it's a hard-to-find 1.8" IDE hard drive I'm considering buying one of those little CF card adaptors and a 16gb CF card. The total cost of that is about £30 and replacement HDDs for this model are far pricier. Has anyone replaced their HDD with a CF card in this way, and, crucially, is the performance utterly horrible afterwards? ;-) I've seen a couple of threads which hint it's possible but the advice eventually given was just to buy a SSD, but I'm not even sure if its possible to get a 1.8" SSD with an IDE connector that'll fit my laptop. (I freely admit that the most sensible thing to do would be to bin it and just buy a cheap netbook which would be smaller, faster and lighter than the sony, but it does have a very nice widescreen display and dammit I just like it !) Thanks, G

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• CMD file time not always matching windows explorer file time

  - by skyrail

  I have a set of file I need to set the created, modified and last access date to exif date taken value, after a copy between 2 folders (might be fat32 on memory card or ntfs on fixed or usb disk). When I copy a file, the date and time switch to the current date. Then I change all 3 dates manually, either with change attributes in windows explorer or far manager on the command line. To make it faster I wrote a batch script getting original file dates (with php and function stat), building a batch script that invoke nircmd setfiletime for each file. Then I apply this batch to the copied version. The operation is relatively fast and reliable. Unfortunately, a bunch of files have last access and created time different in cmd and windows explorer (1H difference). Very strangely, it happens with dates between november and february, which make the operation unreliable. Why is this happening, and how can I fix it?

  Read the article

• Issues with hard disk secure erase

  - by John Watson

  I want to completely wipe all the data and both OSes (Ubuntu and Windows 7) from my hard drive. I tried DBAN but it gives me an error and does not run. I am looking for an alternative. After reading some articles online, I came to know that, using a Linux live CD, it can be done using either of following commands. a) sudo dd if=/dev/zero of=/dev/sda b) sudo shred -vfz -n 1 /dev/sda My questions are 1) Which option (a or b) is more secure (wipes everything) and faster? 2) Does either of the options damage the hard drive or anything? I want to use hard drive again i.e. installing Windows and Ubuntu again.

  Read the article

• How do I make zsh completion act more like bash completion?

  - by Tordek

  I'm a recent convert from bash to zsh (which I'm using "oh my zsh" with), but one thing annoys me: When I hit the tab key, the first autocompletion is filled out automatically, and you need to cycle through the completions by hitting tab repeatedly. This differs from bash, where you are just shown a list of the completions. If all completions have the same prefix, then this prefix is filled out. You can select the one you want by continuing to type. I find the latter preferable since it is faster to type, than to select a completion by hitting tab repeatedly. Is there any way to make zsh completion act more like bash in this regard?

  Read the article

• Remote file copy util (like rsync) but that will take account of data already copied (in this sessio

  - by Rory McCann

  Let's say I have a directory with 2 files, both are identical and quite large (e.g. 2GB ea.) I want to rsync that directory to a remote host. As I understand it (and I could be wrong), rsync calculates checksums of files. Surely if it sees 2 files with the same checksum it can just copy the first file, then do a local copy on the remote host for the 2nd file? That would make it faster, no? On a similar note, doesn't rsync hash all the remote files before copying? If it saw a different file with the same hash as a file that was to transfered, it could do a local copy on the remote host. Does rsync support this sort of thing? Is there some way to turn it on? Is there a tool similar to rsync that will do this sort of 'hash based' local copies?

  Read the article

• Can not join comp to the domain... greyed out

  - by Logman

  I have an old WinXP Pro SP3 computer I need to join to the domain, simple right? not really. When I go to control panel - system - computer name and click on CHANGE ("rename this computer") everything is greyed out. I can not set it from workgroup to a domain. I am logged on locally as an admin. (Builtin account and one I created) I have checked local policy (gpedit.msc) on the comp, but it feels like a needle in the haystack. I could probably reload an image faster than trying to fix this...but I am curious so I post here to see if anyone knows of it/fix. I tried reseting the policy to defaults, but no luck: secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose EDIT:

  Read the article

• Configure FTP Server with two different IP addresses on different subnets and separate NICs

  - by Luke

  I have an FTP server that's on a low bandwidth connection. We want to set it up with a second IP address on a much higher bandwidth connection. I set up the second interface with a static IP address on the faster connection. This unfortunately does not work. I can verify that the second IP address works perfectly when I disable the first IP address. What do I need to do to get two separate interface IP addresses on different subnets working on the same server?

  Read the article

• afp/smb transfers caps at 2 megabytes/sec, wireless N

  - by RD.

  I wanted to transfer files between two mac computers. The network is wireless-N and both computers have wireless-N modules in them. The problem is that when I transfer files between them, via file sharing (afp) the network speed caps at 2 megabytes/sec. Just downloading files from the internet I can get faster speeds, so this isn't a constriction of my wifi bandwidth, it appears to be a constriction of the protocol being used. My wifi-n is set to 130mbits, so I should see real world transfer speeds around 12-16 megabytes/sec I did this command on both computers sudo sysctl -w net.inet.tcp.delayed_ack=0 which is supposed to lower tcp overhead, but this did not affect it. How can I get the speed I am expecting?

  Read the article

• What is the fastest RAID in practise?

  - by Luke

  I'm going to be rebuilding my server, and I want much faster access to my data. I've used RAID 1 and 0 in the past, and decided upon RAID 10 (dedicated RAID card). Then someone told me to use RAID 5+0, then someone else told me to use RAID 6+0. Assuming the Hardware RAID Card supports each level, what is currently the FASTEST RAID available, given x number of hard drives? Reliability is now another factor, and I am willing to spend money on new drives if a drive (or multiple) fail. I simply want to know what the fastest RAID level is, along with some reliability for recovering from a failure

  Read the article

• Mobile Intel 965 vs 4 Series chipset speed differences

  - by graham.reeds

  A client of ours is having a problem panning on a mapping application that we write on their panasonic toughbooks (CF-19's). One of their toughbooks the panning is fairly smooth while on the other it is really slow. Doesn't help that they have all the settings turned up, but I would of thought any reasonably new graphics card (even shared memory) would have more than adequate graphic speed. I am pretty sure that the graphic adapter is to blame, but I can't find anything out about either chipset (level of acceleration, non-problems, etc). All I get is the intel data sheets. The faster panning one is on the Mobile Intel 4 Series Express Chipset while the slower is on the Mobile Intel 965 Express Chipset. Is this expected? Does it sound like a driver problem? They both have the same amount of ram and same cpu.

  Read the article

• design question for transportation agency/workflow system

  - by George2

  I am designing a transportation agency/workflow system, and it including 3 types of people, customer who requests to transport some stuff, drivers who deliver the stuff, and truck manager who manages transport source/destination truck coordination and communicates/organizes drivers. The system is expected to be a web site, and 3 kinds of people could use the web site to submit request, accept request, monitor status of specific stuff transportation, etc. The web site is more like an open agency or a workflow system. I am wondering whether there are any existing technologies, tools or projects (better to be open source, but not a must) which I could build my application faster based on? I prefer to use .Net technologies, but not a must. Thanks in advance!

  Read the article

• IIS slow response

  - by Martin Ševic

  I have developed ASP.NET 4.5 application which take infos about sensors from sqlite database every 3 seconds. This application runs nice on my local develop machine on IIS Express server. I have created virtual machine (4x 3,25 GHz CPU; 6GB RAM) where i have installed Windows Server 2012 and IIS 8 service in order to test application on real server because we will run it on production machine later. After installing VC++ 2010 x64 and VC++ 2010 x86 and set "Enable 32-bit application" to true in application pool website started to work but there is a large problem with response time. There is a for example 10 seconds delay before page loads. CPU utillization is about 10% and RAM about 1,5GB. I am new to configuring IIS server so i want to ask if there is some tip how to make it faster. I am sure, there will be some twist which will make it normal work. Many thanks.

  Read the article

• Maximum burn speed keeps decreasing from Nero?

  - by Bob King

  I have a 16x DL DVD burner in my work machine (XP SP3). I'm using 8x TDK DVD+R media. The first dozen or so disks burned fine using Nero, but after that I started to coaster every disk. I asked Nero to calculate the maximum speed, and it calculated it at 4x. This worked for a few disks, then the same issues. I'm currently burning at 1.2x. I've since tried other brands and full 16x compatible disks, I can't get my burn speed to be recognized as any faster than what it's currently at. I've tried uninstalling Nero. I've tried burning directly in Windows, and also tested an MP3 CD in iTunes, and no luck. Any suggestions, short of reinstalling Windows, would be great!

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >