Search Results

Search found 25547 results on 1022 pages for 'table locking'.

Page 891/1022 | < Previous Page | 887 888 889 890 891 892 893 894 895 896 897 898  | Next Page >

• PC can't detect second RAM installed

  - by kulwinder

  I have PC with 512 MB RAM installed (motherboard manufacture MICRO STAR, chipset P4M800), pc was running very slow so I decided to upgrade the ram. I installed CPU-Z and check the ram installed on the machine, also had a look at the stick installed. 512 MB PC 3200 400 MHz DDR but my mother supports 200 MHz and it was working ok. So I bought 2GB which I checked on manual that it support upto 2 GB Ram. So I installed 2GB PC 3200 400 MHz same as the old one, I plugged in both eventhough motherboard only support upto 2 GB but system spec only shows 512 (deducts 64 MB shared vga memory) I checked on CPU-Z, it detects both, slot 1 512 MB, slot 2 2048 MB, comparing screen for both slots, both the same, volt 2.5, frequency 166 MHz and 200MHz, only difference on those is 2gb ram shows under timings table 133MHz 166 MHz and 200MHz but 512 MB shows only 166MHz and 200MHz. I checked on Google and can't seems to figure out whats wrong with it. If I only plug in 2GB. Pc doesn't boot up like ram not working.With only 512 MB plugged in seems ok. Please help.

  Read the article

• Bypassing SQUID on freebsd with PF

  - by epema

  I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

  Read the article

• Disk Partitioning problem with fdisk.

  - by MA1

  Currently i am using fdisk to create/resize windows partitions. Following is a sample input script to fdisk to create/resize windows partitions: fdisk /dev/sda < partInput the contents of partInput are as follows: d #delete the partition 3 #partition number to be deleted n #add a new partition p #primary: type of new partition 3 #new partition number 18804 #start cylinder of new partition 77433 #end cylinder of new partition t #change the type of partition 3 #partition number whose type(filesystem) is to be changed 7 #HPFS/NTFS: partition type(filesystem) n #add a new partition p #primary: type of partition 77434 #first cylinder of new partition 77825 #end cylinder new partition w #write all the above changes As you see in the above input we are using cylinders for start and end. Earlier i am using sectors as unit and everything is working fine but getting problems when partitioning a 1.5TB hard drive. Then i changed the unit to cylinders but it is working on some machines not all. On some machines fdisk failed to create the partition table correctly. So, i am thinking to move to parted if there is no way to do the above using fdisk. Please also tell me how to correctly convert sectors to cylinders? How to perform all the above steps using parted without losing the data OR how to use fdisk correctly?

  Read the article

• Natting trafic from a tunnel to internet

  - by mezgani

  I'm trying to set up a GRE tunnel between a linux box and a router (LAN), and I'm having a few problems which seem to depend to my iptables configuration. Watching with tcpdump on linux box, I can see packets coming with flags GREv0, all i need right know is forwarding this data to internet, found here some trace : iptables -F iptables -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t nat -X iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -F iptables -t mangle -X iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -o cloud -j ACCEPT iptables -A FORWARD -i cloud -o ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE echo "1" /proc/sys/net/ipv4/ip_forward cloud Link encap:UNSPEC HWaddr C4-CE-7A-2E-F2-BF-DD-C0-00-00-00-00-00-00-00-00 inet adr:10.3.3.3 P-t-P:10.3.3.3 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 B) TX bytes:10416 (10.1 KiB) Table de routage IP du noyau Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface 196.206.120.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.3.0 0.0.0.0 255.255.255.0 U 0 0 0 cloud 0.0.0.0 196.206.120.1 0.0.0.0 UG 0 0 0 ppp0 root@aldebaran:~# ip route 196.206.120.1 dev ppp0 proto kernel scope link src 196.206.122.46 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.18 10.3.3.0/24 dev cloud scope link default via 196.206.120.1 dev ppp0

  Read the article

• Get Internal IP Address From DHCP Hostname

  - by ell

  I would like to try and get an internal ip address of one of the computers on my network. The reason for this is I have a little home server box downstairs but every time I want to SSH into it I have to open my router configuration and go on the DHCP client table and look at the IP address. For example I would like to be able to go ssh ell-sever instead of ssh 192.168.1.105 or whatever it happens to be. My network configuration is like so: Router downstairs that is connected to the Internet and is running a DHCP server My server computer (ell-server) is a headless pc connected to the router via ethernet cable. Running Ubuntu 11.04 Server Edition My laptop upstairs (ell-laptop) that is running Ubuntu 11.10 Desktop Edition connected wirelessly Other (irrelevant) computers - 2 x Windows XP, 1 x Xubuntu - all connected with cables. (It seemed to me the method of connection isn't useful information but I put it in anyway - just in case. If I have missed any information please tell me) Do I have to run a DNS server on one of my computers? If so which one? And does that mean I will have to run a DDNS client on each computer? Thanks in advance, ell.

  Read the article

• Dual-booting Ubuntu and Pardus with GRUB2...Pardus no show?

  - by Ibn Ali al-Turki

  I have Ubuntu 10.10 installed and used to dual-boot Fedora, but I replaced Fedora with Pardus. After the install, I went into ubuntu, and did a sudo update-grub. It detected my Pardus 2011 install there. When I rebooted, it did not show up in my grub2 menu however. I went back to Ubuntu and did it again...then checked the grub.cfg, and it is not there. I have read that Pardus uses a grub legacy. How can I get Pardus into my grub2 menu? Thanks! sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd9b3496e Device Boot Start End Blocks Id System /dev/sda1 * 1 15197 122067968 83 Linux /dev/sda2 36394 60802 196059757 5 Extended /dev/sda3 15197 30394 122067968 83 Linux /dev/sda5 36394 59434 185075308 7 HPFS/NTFS /dev/sda6 59434 60802 10983424 82 Linux swap / Solaris Partition table entries are not in disk order and update-grub Found linux image: /boot/vmlinuz-2.6.35-25-generic Found initrd image: /boot/initrd.img-2.6.35-25-generic Found memtest86+ image: /boot/memtest86+.bin Found Pardus 2011 (2011) on /dev/sda3 Yet after this, I go to grub.cfg, and Pardus is not there.

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  Hi, partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• SQL Error (1064) when importing data from SQL file

  - by mejpark

  I have a MySQL database, which was originally set up with the default latin1 character set and latin1_swedish_ci collation. I was using the database like this for sometime, until I noticed strange characters on my production web site, which is powered by a database exported from my development machine. At this point, I changed the default character set of the database and tables to utf8 and the collation to utf8_unicode_ci, converted the latin1 data inside each table to utf8 (using the 'convert data' option) and exported the database as a single SQL file using HeidiSQL. When the resulting SQL file is opened in Notepad++, several characters are rendered incorrectly. For example, en dashes (-) are displayed as – and e with accent (é) are displayed as é. I changed the encoding of the file from ANSI to UTF-8 (using the encoding menu option in Notepad++) and the offending characters are rendered correctly. I saved the new utf8-encoded SQL file and attempted to import the contents into the MySQL database on my production server. The import process fails with following error: /* SQL Error (1064): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '?# -------------------------------------------------------- # Host: ' at line 1 */ /* Error with snippets directory: The specified path was not found */ The head of the SQL file: # -------------------------------------------------------- # Host: 127.0.0.1 # Server version: 5.1.33-community # Server OS: Win32 # HeidiSQL version: 6.0.0.3773 # Date/time: 2011-04-20 09:48:36 # -------------------------------------------------------- It chokes on the first line of the file, which is commented out. Why is this happening? I didn't have a problem loading data from SQL files until I changed the character set and collation of the database. I came up with an ugly workaround to this problem by performing following steps: Export database as single SQL file using HeidiSQL Open resulting file in Notepad++ and convert from ANSI to UTF-8 encoding Create new empty file in Notepad++, paste in UTF-8 and save file normally What am I missing here?

  Read the article

• Can't seem to stop Postfix backscatter

  - by Ian

  I've just migrated to a Postfix system and can't seem to stop the backscatter messages to unknown addresses on the site. I have a file, validrcpt, that lists all the valid emails on the site - about eight of them. Yet when a message is sent to a non-existent address, instead of just dropping it, postfix is replying with a "Recipient address rejected: User unknown in virtual mailbox table" email. Do I have something set wrong? I've read http://www.postfix.org/BACKSCATTER_README.html but unless I'm caffeine deficient, I don't see what's happening and perhaps I'm just to used to my old qmail setup. Here's postconf -n: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = smtp-amavis:[127.0.0.1]:10024 home_mailbox = Maildir/ inet_interfaces = all inet_protocols = ipv4 local_recipient_maps = hash:/etc/postfix/validrcpt mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/dovecot.conf -m "${EXTENSION}" mailbox_size_limit = 0 mydestination = localhost myhostname = localhost mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname policy-spf_time_limit = 3600s readme_directory = no recipient_bcc_maps = hash:/etc/postfix/recipient_bcc recipient_delimiter = + relay_recipient_maps = hash:/etc/postfix/relay_recipients relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination,check_policy_service unix:private/policy-spf,reject_rbl_client zen.spamhaus.org,reject_rbl_client bl.spamcop.net,reject_rbl_client cbl.abuseat.org,check_policy_service inet:127.0.0.1:10023 smtpd_relay_restrictions = permit_mynetworks permit_sasl_authenticated defer_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = reject_unknown_sender_domain smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/dovecot/dovecot.pem smtpd_tls_key_file = /etc/dovecot/private/dovecot.pem smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_gid_maps = static:5000 virtual_mailbox_base = /home/vmail virtual_mailbox_domains = digitalhit.com virtual_mailbox_maps = hash:/etc/postfix/vmaps virtual_minimum_uid = 1000 virtual_uid_maps = static:5000

  Read the article

• Exclude list of specific files in wget

  - by nanker

  I am trying to download a lot of pages from a website on dial-up and it can be brutally slow. I have almost got the perfect wget command, but because I'm downloading pages from the same site wget wastes times downloading the same standard images for each page. If I know the name of the default page images, is there any way to have wget ignore and thus avoid downloading those for each and every page? Here is an example of one of the wget commands that my shell script generates into another shell script to download all of the pages: mkdir candy-canes-on-the-flannel-board-in-preschool cd candy-canes-on-the-flannel-board-in-preschool wget -p -nd -A jpg,html -k http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ wget -c --random-wait --timeout=30 --user-agent="Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008092416 Firefox/3.0.3" http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ -O "candy-canes-on-the-flannel-board-in-preschool" rm Baby-and-Toddler.jpg Childrens-Books.jpg Creative-Art.jpg Felt-Fun.jpg Happy_Rainbow-e1338766526528.jpg index.html Language-and-Literacy.jpg Light-table-Button.jpg Math.jpg Outdoor-Play.jpg outer-jacket1-300x153.jpg preschoolspot-button-small.jpg robots.txt Science-and-Nature.jpg Signature-2.jpg Story-Telling.jpg Tags-on-Preschool.jpg Teaching-Two-and-Three-Year-olds.jpg cd ../ Now I realize the script is not likely as savvy as it could be but it is doing what I need at the moment except that you can see from the rm command that I would just like to prevent wget from downloading the files in the first place if possible. I almost forgot to mention, there are two wget commands and that is because the first one downloads the page as index.html and for some reason it does not open in my browser, however, when I open it and look at it in vim all of the page's content is there, so I am not sure why it does not open. But if I just issue the second wget command as it is then that page, same file really with an alternate name, opens up fine. Something that if I could fix would also help to streamline the process.

  Read the article

• Unable to ping gateway via bridge nic

  - by Ara

  I'm trying to install KVM on Ubuntu 12.04 server. We have multiple nic on this server of which we primarily use eth0. The server network runs fine(i'm able to ping gateway, ping dns server and ping servers on internet) with eth0 /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local I installed bridge-utils and configured br0 as below /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.22.194 netmask 255.255.255.0 network 192.168.22.0 broadcast 192.168.22.255 gateway 192.168.22.1 dns-nameservers 10.71.130.58 10.71.130.60 dns-search test.local bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off Post which i'm able to ping servers on the same ip range 192.168.22.2-254 except for 192.168.22.1 (which is the gateway) also i'm not able to ping any other servers. I'm not able to ping this machine from network. The output for route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.22.1 0.0.0.0 UG 100 0 0 br0 192.168.22.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 I've been struggling with this issue for past 5 days, would be of help if anyone can point me in the right direction to fix this issue. Thanks in advance

  Read the article

• IP-dependent local port-forwarding on Linux

  - by chronos

  I have configured my server's sshd to listen on a non-standard port 42. However, at work I am behind a firewall/proxy, which only allow outgoing connections to ports 21, 22, 80 and 443. Consequently, I cannot ssh to my server from work, which is bad. I do not want to return sshd to port 22. The idea is this: on my server, locally forward port 22 to port 42 if source IP is matching the external IP of my work's network. For clarity, let us assume that my server's IP is 169.1.1.1 (on eth1), and my work external IP is 169.250.250.250. For all IPs different from 169.250.250.250, my server should respond with an expected 'connection refused', as it does for a non-listening port. I'm very new to iptables. I have briefly looked through the long iptables manual and these related / relevant questions: http://serverfault.com/questions/57872/iptables-question-forwarding-port-x-to-an-ssh-port-of-different-machine-on-the-n http://serverfault.com/questions/140622/how-can-i-port-forward-with-iptables However, those questions deal with more complicated several-host scenarios, and it is not clear to me which tables and chains I should use for local port-forwarding, and if I should have 2 rules (for "question" and "answer" packets), or only 1 rule for "question" packets. So far I have only enabled forwarding via sysctl. I will start testing solutions tomorrow, and will appreciate pointers or maybe case-specific examples for implementing my simple scenario. Is the draft solution below correct? iptables -A INPUT [-m state] [-i eth1] --source 169.250.250.250 -p tcp --destination 169.1.1.1:42 --dport 22 --state NEW,ESTABLISHED,RELATED -j ACCEPT Should I use the mangle table instead of filter? And/or FORWARD chain instead of INPUT?

  Read the article

• SQL Server Database In Single User Mode after Failover

  - by jlichauc

  Here is a weird situation we experienced with a SQL Server 2008 Database Mirroring Failover. We have a pair of mirrored databases running in high-availability mode and both the principal and mirror showed as synchronized. As part of some maintenance I triggered a manual failover of the principal to the mirror. However after the failover the principal was now in single-user mode instead of the expected "Principal/Synchronized" state we usually get. The database had been in multi-user mode on the previous principal before this had happened. We ended up stopping all applications, restarting the SQL Server instances, and executing "ALTER DATABASE ... SET MULTI_USER" to bring the database back to the expected "Principal/Synchronized" state in a multi-user mode. Question. Does anyone know where SQL Server stores information about whether a database should be in single-user mode or not? I'm wondering if there is some system database or table that has this setting recorded somewhere. In particular we had an incident once with the database on the original principal (the one I was failing over to) where when trying to detach the database it was put into single-user mode. I'm wondering if that setting is cached somewhere and is the reason that SQL Server put it back into single-user mode after a failover.

  Read the article

• Postfix: How do I Make Email Aliases Work?

  - by Nick

  The documentation claims that I can add aliases in a file (like /etc/postfix/virtusertable) and then use the "virtual_maps" directive to point to it. This does not appear to be working, however. My mail is bouncing with: Recipient address rejected: User unknown in local recipient table; If I mail the user from the server using the mail command, it works. mail myuser The message goes through postfix and inserts itself in the Cyrus inbox correctly. When I use fetchmail to get the user's messages off a pop3 server, postfix fails. The user's email is "[email protected]", but it doesn't seem to be mapping correctly to "myuser", the cyrus mailbox name. /etc/postfix/main.cf myhostname = localhost alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all mailbox_transport = lmtp:unix:/var/run/cyrus/socket/lmtp #lmtp:unix:/var/run/lmtp virtual_alias_domains = mydomain.com virtual_maps = hash:/etc/postfix/virtusertable /etc/fetchmailrc et syslog; set daemon 20; poll "mail.pop3server.com" with protocol pop3 user "[email protected]" password "12345" is "myuser" fetchall keep /etc/postfix/virtusertable [email protected] myuser postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_size_limit = 0 mailbox_transport = lmtp:unix:/var/run/cyrus/socket/lmtp mydestination = localhost myhostname = localhost mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_domains = mydomain.com Why is it ignoring my alias?

  Read the article

• My system administrator set up 2 databases that sync. Master-Master. However, these two databases a

  - by Alex

  DB1 and DB2. I made changes to DB1, and it does not seem to be on DB2. When I do "SHOW SLAVE STATUS\G" on DB2, there seems to be an error: mysql> show slave status\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: Master_User: Master_Port: Connect_Retry: 60 Master_Log_File: mysql-bin.0005496 Read_Master_Log_Pos: 5445649315 Relay_Log_File: mysqld-relay-bin.0041705 Relay_Log_Pos: 1624302119 Relay_Master_Log_File: mysql-bin.0004461 Slave_IO_Running: Yes Slave_SQL_Running: No Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 1062 Last_Error: Error 'Duplicate entry '4779' for key 1' on query. Default database: 'falc'. Query: 'INSERT INTO `log` (`anon_id`, `created_at`, `query`, `episode_url`, `detail_id`, `ip`) VALUES ('fdzn1d45kMavF4qbyePv', '2009-11-19 04:19:13', 'amazon', '', '', '130.126.40.57')' Skip_Counter: 0 Exec_Master_Log_Pos: 162301982 Relay_Log_Space: 136505187184 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: NULL 1 row in set (0.00 sec) Then, I did show tables, and it seems like DB2 is lacking a table that I created on DB1...that means that for some reason, DB2 stopped syncing with DB1. How can I simply allow them to be in full synchronization again? All I want is DB2 to be exactly the same as DB1!

  Read the article

• PhpMyAdmin import/export - strange character encoding issues.

  - by John Hunt

  Hello, I'm migrating a site to a new host, and there are a couple of databases on there. There's no SSH access so I'm stuck with phpmyadmin. The issue is that certain characters (namely just whitespace) seems to being corrupt on the new site (same html, and apache doesn't seem to be messing with any encodings - you can see the strange characters have changed when I use less on my linux machine after downloading a table dump from both servers.) The issue isn't as bad if I import into the new database as utf-8 - whitespace characters only have one funny A type symbol instead of two. I've been trying various combinations of character encoding etc to no avail. Exporting from: phpMyAdmin 2.6.2 MySQL 4.1.20 MySQL connection collation: utf8_general_ci MySQL charset: UTF-8 Unicode (utf8) Collation on tables and their fields is: latin1_swedish_ci Importing to: phpMyAdmin - 2.11.9.2 MySQL client version: 5.0.45 MySQL charset: UTF-8 Unicode (utf8) MySQL connection collation: utf8_general_ci The import sql has this kind of thing in it: ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=192 ; I get the impression this is actually a bug or something with mysqldump as nothing seems to work.. does anyone have any insight into this? Cheers, John.

  Read the article

• How do I `SUM` by multiple columns in Excel

  - by dwwilson66

  I have a comma delimited file that includes two columns date/time (which imports as Excel's mm/dd/yyyy hh:mm custom format) and status of 1 or 0. The status represents a piece of equipment either being on or off. I'm trying to generate a graph that will show, hours up vs. down by day. CONSIDER: 1/1/2012 00:00, 1 1/1/2012 03:00, 0 1/1/2012 14:00, 1 1/3/2012 00:00, 0 This tells me that the equipment was up for three hours, down for eleven hours, and then up for thirty-four hours (across two calendar days). However, I would like to generate a graph that shows how many hours PER DAY we were up or down. CONSIDER: 1/1 XXXXXXXXXXXXX----------- (up 13, down 11) 1/2 XXXXXXXXXXXXXXXXXXXXXXXX (up 24) To me, it seems that I need to generate a dataset summing HOURS by STATUS by CALENDAR DAY...but I can't seem to find a flavor of pivot table or nested SUM(IF(SUMIF(...))) combination to make it work. Most troubling is accounting for date changes...in my example above, since my uptime starting at 14:00 on 1/1/2012 crosses midnight, I need to know that 10 uptime hours get totalled with 1/1/2012 and 24 uptime hours get totalled with 1/2/2012. I may be able to do something with a calendar list to drive the date summation, but then I need a way to compare 01/01/2012 to 01/01/2012 03:00 as equal. There's got to be a way along the lines of if(INTEGER-PORTIONS-OF-SERIAL-DATES-ARE-EQUAL,TOTAL-HOURS-IF-VALUE-IS_1,0) but nothing's worked so far. Any suggestions? I've been battling this most of the day, and need a fresh perspective. Thanks

  Read the article

• What is a good WordPress theme for long Objective-C code samples [closed]

  - by willc2

  As some of you iPhone developers know, Objective-C can be a verbose language. Long, descriptive variable and method names are the norm. I'm not complaining, it makes code easier to read and code completion makes it easy to type. But damn! Check out this method name for getting a cell in a table view: -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath; I have a WordPress blog where I publish my code samples as I'm learning the language. One thing I hate on other blogs is how the code won't fit in a column without that scroll bar or without wrapping around. It really made it hard for me to read and comprehend method names back when I was a super-noob (six months ago). Right now I use the clean-looking Fazyvo 1.0 theme by noonnoo. I love the look of it but the columns are just too narrow and it doesn't have support for wider ones. I could hand-modify it but then I'd have to maintain/redo those changes every time I updated it. Instead, I'm looking for a nice theme that has width control built-in and looks good at larger font sizes. Can anyone help? Note: I use WP-CodeBox for code syntax highlighting.

  Read the article

• IPv6 working fine, IPv4 throws OpenSSL error

  - by jippie

  I am building a webserver ( http://blog.linformatronics.nl/ ), which functions just fine on both IPv4 and IPv6 and when using a non-SSL connection. However when I connect to it through https, IPv6 works as expected, but an IPv4 connection throws a client side error. Server side logs are empty for the IPv4/https connection. Summarized in a table: | http | https -----+-------+------------------------------------------------------- IPv4 | works | OpenSSL error, failed. No server side logging. -----+-------+------------------------------------------------------- IPv6 | works | self signed certificate warning, but works as expected Apparently the SSL tunnel isn't even set up, which accounts for the Apache logs being empty. But why does it work fine for IPv6 and fail for IPv4? My question is why is this OpenSSL error being thrown and how can I solve it? Below is some extra information about the setup. IPv6 https Command used to reproduce IPv6/https behaviour: $ wget --no-check-certificate -O /dev/null -6 https://blog.linformatronics.nl --2012-11-03 15:46:48-- https://blog.linformatronics.nl/ Resolving blog.linformatronics.nl (blog.linformatronics.nl)... 2001:980:1b7f:1:a00:27ff:fea6:a2e7 Connecting to blog.linformatronics.nl (blog.linformatronics.nl)|2001:980:1b7f:1:a00:27ff:fea6:a2e7|:443... connected. WARNING: cannot verify blog.linformatronics.nl's certificate, issued by `/CN=localhost': Self-signed certificate encountered. WARNING: certificate common name `localhost' doesn't match requested host name `blog.linformatronics.nl'. HTTP request sent, awaiting response... 200 OK Length: 4556 (4.4K) [text/html] Saving to: `/dev/null' 100%[=======================================================================>] 4,556 --.-K/s in 0s 2012-11-03 15:46:49 (62.5 MB/s) - `/dev/null' saved [4556/4556] IPv4 https Command used to reproduce IPv6/https behaviour: $ wget --no-check-certificate -O /dev/null -4 https://blog.linformatronics.nl --2012-11-03 15:47:28-- https://blog.linformatronics.nl/ Resolving blog.linformatronics.nl (blog.linformatronics.nl)... 82.95.251.247 Connecting to blog.linformatronics.nl (blog.linformatronics.nl)|82.95.251.247|:443... connected. OpenSSL: error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol Unable to establish SSL connection. Notes I am on Ubuntu Server 12.04.1 LTS

  Read the article

• How to Enable IPtables TRACE Target on Debian Squeeze (6)

  - by bernie

  I am trying to use the TRACE target of IPtables but I can't seem to get any trace information logged. I want to use what is described here: Debugger for Iptables. From the iptables man for TRACE: This target marks packes so that the kernel will log every rule which match the packets as those traverse the tables, chains, rules. (The ipt_LOG or ip6t_LOG module is required for the logging.) The packets are logged with the string prefix: "TRACE: tablename:chain- name:type:rulenum " where type can be "rule" for plain rule, "return" for implicit rule at the end of a user defined chain and "policy" for the policy of the built in chains. It can only be used in the raw table. I use the following rule: iptables -A PREROUTING -t raw -p tcp -j TRACE but nothing is appended either in /var/log/syslog or /var/log/kern.log! Is there another step missing? Am I looking in the wrong place? edit Even though I can't find log entries, the TRACE target seems to be set up correctly since the packet counters get incremented: # iptables -L -v -t raw Chain PREROUTING (policy ACCEPT 193 packets, 63701 bytes) pkts bytes target prot opt in out source destination 193 63701 TRACE tcp -- any any anywhere anywhere Chain OUTPUT (policy ACCEPT 178 packets, 65277 bytes) pkts bytes target prot opt in out source destination edit 2 The rule iptables -A PREROUTING -t raw -p tcp -j LOG does print packet information to /var/log/syslog... Why doesn't TRACE work?

  Read the article

• Tridion 2011 SP1 Core Service - expose to live server within PROD env

  - by Neil

  We have a requirement to allow our users to submit information about their "projects" - a small piece of text and single image they upload. Ultimately we'll have a listing page of user contributed projects that others can comment on and rate. We've decided to user Tridion's UGC for rating & comments site-wide for this first phase which has got me thinking - UGC is tied to Tridion published pages & components, if we want UGC on our user-submitted projects, they'll have to be created within Tridion as components themselves, not be sat in some custom db table? Is this where the Core Service could come in? My understanding is that the CD Web Service is for retrieval, not for interacting with the Content Manager. Is it OK (!) architecturally to expose the Core Service only to our live application servers so our backend .NET code can create "project components" that can be then be published by editors allowing them to be commented on? Everything sounds pretty neat and tidy apart from the "exposing Core Service to live servers" bit. Without this though I'd have to write a custom way to "transfer" it back over to the Content Manager - maybe like Audience Manager Sync works? Anyone done this before?

  Read the article

• SNMP Access on Ubuntu

  - by javano

  I am trying to use SNMP to monitor a machine locally on its self and remotely. This is the snmpd.conf (Ubuntu 8.04.1): # sec.name source comunity com2sec readonly 1.2.3.4 nicenandtight com2sec readonly 5.6.7.8 reallysafe group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly view all included .1 view system included .iso.org.dod.internet.mgmt.mib-2.system access MyROGroup "" any noauth exact all none none syslocation my house syscontact me <[email protected]> exec .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro smuxpeer .1.3.6.1.4.1.674.10892.1 includeAllDisks 95% 1.2.3.4 is the local machines IP and everything is working locally. 5.6.7.8 is the remote machine and initially I am just trying to touch SNMPD with snmpwalk from the remote machine; snmpwalk -v 2c -c reallysafe 1.2.3.4 Timeout: No Response from 1.2.3.4 I have added to iptables as the very first rule; -A INPUT -p udp -m udp --dport 161 -j ACCEPT With such a loose iptables rule I can't see why I can't even touch the SNMPD on that Uubuntu Machine. There are more specific rules further down the table but as I couldn't connect I added the above. TCPDump shows the UDP packets coming in. What could be going wrong here?

  Read the article

• How is it possible that I can do a host lookup but not a curl?

  - by Daniel Quinn

  Has anyone ever seen this before? Note that this happens not only with google.com, but with every domain I try. It's a wireless connection (WEP), but I'm not sure how that would be relevant: $ curl -v google.com # This takes about 60s to return * getaddrinfo(3) failed for google.com:80 * Couldn't resolve host 'google.com' * Closing connection #0 curl: (6) Couldn't resolve host 'google.com' $ host google.com google.com has address 209.85.148.106 google.com has address 209.85.148.147 google.com has address 209.85.148.99 google.com has address 209.85.148.103 google.com has address 209.85.148.104 google.com has address 209.85.148.105 google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. $ cat /etc/resolv.conf # Generated by NetworkManager nameserver 192.168.1.201 $ cat /etc/hosts 127.0.0.1 localhost ::1 localhost $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 wlan0 127.0.0.0 127.0.0.1 255.0.0.0 UG 0 0 0 lo 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0

  Read the article

• Change the order of IP addresses returned by ifconfig?

  - by erikcw

  I have an Ubuntu server with several IP addresses attached to it. 127.0.0.1 is listed as venet0 by ifconfig. I'm using Chef to configure the server. The problem is that chef is listing 127.0.0.1 as the IP address for the server instead of one of the server's "real" IPs. (apparent "ohai ipaddress" uses the first IP listed by ifconfig to determine the server's IP). How can I change the order so the servers main IP is listed first instead of the 127.0.0.1? Can venet0 be deleted and venet0:0 be "promoted" to take its place since 127.0.0.1 is already listed in the "lo" interface? lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:16700 (16.7 KB) TX bytes:16700 (16.7 KB) venet0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:127.0.0.1 P-t-P:127.0.0.1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 RX packets:7622207 errors:0 dropped:0 overruns:0 frame:0 TX packets:8183436 errors:0 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2102750761 (2.1 GB) TX bytes:2795213667 (2.7 GB) venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX1 P-t-P:XXX.XXX.XXX.XX1 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 venet0:1 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:XXX.XXX.XXX.XX2 P-t-P:XXX.XXX.XXX.XX2 Bcast:0.0.0.0 Mask:255.255.255.255 UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1 route -n route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.0.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 venet0 0.0.0.0 192.0.2.1 0.0.0.0 UG 0 0 0 venet0

  Read the article

• Connect linux server to VPN server via PPTP

  - by wowpatrick

  I'm trying to connect a Linux (Ubuntu 10.04 LST) server to a VPN server via the PPTP client to an VPN server. I configured the PPTP client as said in the documentation. The connection is correctly added as an interface, but somehow the connection dose not work. ping -I ppp0 google.com dose not return anything and traceroute -i ppp0 only shows the first hop, and then displays nothing. Any ideas of what is going wrong? Incorrect routing configuration? ifconfig output for the configured interface: ppp0 Link encap:Point-to-Point Protocol inet addr:xx.x.xxx.xxx P-t-P:10.0.0.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1496 Metric:1 RX packets:415 errors:0 dropped:0 overruns:0 frame:0 TX packets:468 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:31428 (31.4 KB) TX bytes:32394 (32.3 KB) route output Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.x.x.1 * 255.255.255.255 UH 0 0 0 ppp0 xx.xxx.xxx.xx sp.ip 255.255.255.255 UGH 0 0 0 eth1 192.168.3.0 * 255.255.255.0 U 0 0 0 eth2 192.168.2.0 * 255.255.255.0 U 0 0 0 eth1 default sp.ip 0.0.0.0 UG 100 0 0 eth1

  Read the article

< Previous Page | 887 888 889 890 891 892 893 894 895 896 897 898  | Next Page >