Search Results

Search found 26947 results on 1078 pages for 'util linux'.

Page 895/1078 | < Previous Page | 891 892 893 894 895 896 897 898 899 900 901 902  | Next Page >

• Server hung with "blocked for more than 120 seconds", diskless

  - by alterpub

  I have server which hung every 2-5 days. dmesg show following situation: kernel: [490894.231753] INFO: task munin-html:10187 blocked for more than 120 seconds. kernel: [490894.231799] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [490894.231843] munin-html D 0000000000000000 0 10187 9796 0x00000000 kernel: [490894.231878] ffff88063174b968 0000000000000082 ffff88063174b8d8 0000000000015b80 kernel: [490894.231930] ffff88063174bfd8 0000000000015b80 ffff88063174bfd8 ffff88062fe644d0 kernel: [490894.231982] 0000000000015b80 0000000000015b80 ffff88063174bfd8 0000000000015b80 kernel: [490894.232033] Call Trace: kernel: [490894.232059] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232089] [<ffffffff815a1f13>] io_schedule+0x73/0xc0 kernel: [490894.232115] [<ffffffff8117fd25>] sync_buffer+0x45/0x50 kernel: [490894.232143] [<ffffffff815a258f>] __wait_on_bit+0x5f/0x90 kernel: [490894.232170] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232197] [<ffffffff815a2638>] out_of_line_wait_on_bit+0x78/0x90 kernel: [490894.232227] [<ffffffff81080250>] ? wake_bit_function+0x0/0x40 kernel: [490894.232255] [<ffffffff8117fcd6>] __wait_on_buffer+0x26/0x30 kernel: [490894.232288] [<ffffffffa00131be>] squashfs_read_data+0x1be/0x520 [squashfs] kernel: [490894.232320] [<ffffffff8114f0f1>] ? __mem_cgroup_try_charge+0x71/0x450 kernel: [490894.232350] [<ffffffffa0013963>] squashfs_cache_get+0x1c3/0x320 [squashfs] kernel: [490894.232381] [<ffffffffa00136eb>] ? squashfs_copy_data+0x10b/0x130 [squashfs] kernel: [490894.232426] [<ffffffff815a3dbe>] ? _raw_spin_lock+0xe/0x20 kernel: [490894.232454] [<ffffffffa0013b68>] ? squashfs_read_metadata+0x48/0xf0 [squashfs] kernel: [490894.232499] [<ffffffffa0013ae1>] squashfs_get_datablock+0x21/0x30 [squashfs] kernel: [490894.232544] [<ffffffffa0015026>] squashfs_readpage+0x436/0x4a0 [squashfs] kernel: [490894.232575] [<ffffffff8111a375>] ? __inc_zone_page_state+0x35/0x40 kernel: [490894.232606] [<ffffffff8110d072>] __do_page_cache_readahead+0x172/0x210 kernel: [490894.232636] [<ffffffff8110d131>] ra_submit+0x21/0x30 kernel: [490894.232662] [<ffffffff811045f3>] filemap_fault+0x3f3/0x450 kernel: [490894.232691] [<ffffffff812bd156>] ? prio_tree_insert+0x256/0x2b0 kernel: [490894.232726] [<ffffffffa009225d>] aufs_fault+0x11d/0x170 [aufs] kernel: [490894.232755] [<ffffffff8111f6d4>] __do_fault+0x54/0x560 kernel: [490894.232782] [<ffffffff81122f39>] handle_mm_fault+0x1b9/0x440 kernel: [490894.232811] [<ffffffff811286f5>] ? do_mmap_pgoff+0x335/0x380 kernel: [490894.232840] [<ffffffff815a7af5>] do_page_fault+0x125/0x350 kernel: [490894.232867] [<ffffffff815a4675>] page_fault+0x25/0x30 Os info cat /etc/issue.net Ubuntu 10.04.2 LTS uname -a Linux Shard1Host3 2.6.35-32-server #68~lucid1-Ubuntu SMP Wed Mar 28 18:33:00 UTC 2012 x86_64 GNU/Linux This system load via ltsp and hasn't harddrives also it has a lot of memory 24Gb. free -m total used free shared buffers cached Mem: 24152 17090 7061 0 50 494 -/+ buffers/cache: 16545 7607 Swap: 0 0 0 I put vmstat info here but I think it won't give results after reboot vmstat 1 30 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 7231156 52196 506400 0 0 0 0 172 143 7 0 92 0 1 0 0 7231024 52196 506400 0 0 0 0 7859 16233 5 0 94 0 0 0 0 7231024 52196 506400 0 0 0 0 7870 16446 2 0 98 0 0 0 0 7230900 52196 506400 0 0 0 0 7308 15661 5 0 95 0 0 0 0 7231100 52196 506400 0 0 0 0 7960 16543 6 0 94 0 0 0 0 7231100 52196 506400 0 0 0 0 7542 16047 5 1 94 0 3 0 0 7231100 52196 506400 0 0 0 0 7709 16621 3 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7857 16552 4 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7192 15491 6 0 94 0 0 0 0 7231220 52196 506400 0 0 0 0 7423 15792 5 1 94 0 1 0 0 7231260 52196 506404 0 0 0 0 7686 16296 2 0 98 0 0 0 0 7231260 52196 506404 0 0 0 0 6976 15183 5 0 95 0 0 0 0 7231260 52196 506404 0 0 0 0 7303 15600 4 0 95 0 0 0 0 7231320 52196 506404 0 0 0 0 7967 16241 1 0 98 0 0 0 0 7231444 52196 506404 0 0 0 0 6948 15113 6 0 94 0 0 0 0 7231444 52196 506404 0 0 0 0 7931 16181 6 0 94 0 1 0 0 7231516 52196 506404 0 0 0 0 7715 15829 6 0 94 0 0 0 0 7231516 52196 506404 0 0 0 0 7771 16036 2 0 97 0 0 0 0 7231268 52196 506404 0 0 0 0 7782 16202 6 0 94 0 1 0 0 7231212 52196 506404 0 0 0 0 7457 15622 4 0 96 0 0 0 0 7231212 52196 506404 0 0 0 0 7573 16045 2 0 98 0 2 0 0 7231216 52196 506404 0 0 0 0 7689 16076 6 0 94 0 0 0 0 7231424 52196 506404 0 0 0 0 7429 15650 4 0 95 0 3 0 0 7231424 52196 506404 0 0 0 0 7534 16168 3 0 97 0 1 0 0 7230548 52196 506404 0 0 0 0 8559 15926 7 1 92 0 0 0 0 7230672 52196 506404 0 0 0 0 7720 15905 2 0 98 0 0 0 0 7230548 52196 506404 0 0 0 0 7677 16313 5 0 95 0 1 0 0 7230676 52196 506404 0 0 0 0 7209 15432 5 0 95 0 0 0 0 7230800 52196 506404 0 0 0 0 7522 15861 2 0 98 0 0 0 0 7230552 52196 506404 0 0 0 0 7760 16661 5 0 95 0 In the munin(monitoring system) graphs I see(before server hung): Disk(nbd0) IOs per device: read: 289m but avg by week 2.09m Disk(nbd0) throughput per device: read: 4.73k but avg by week 108.76 Disk(nbd0) utilization per device: 100% but avg by week 1.2% Eth0 traffic was low: in/out only 2Mbps Number of threads increased to 566 usually 392 Fork rate 1.08 but usually 2.82 VMStat(processes state) Increased to 17.77(from 0 as far as I could see in the graph) CPU usage iowait 880.46% when usually 6.67% It'll be great if somebody help me to understand what's up.

  Read the article

• Using ctrl-arrow keys with PuTTY and screen

  - by kbosak

  I searched and couldn't find a solution for this anywhere. I'm using PuTTY from Windows to connect to various servers where I run bash and screen. It seems bash works fine with ctrl-arrow keys to jump word-to-word on the command line but within screen it's not working. Not in screen, ctrl-left sends "^[OC and ctrl-right is "^[OD". Within screen I instead get "^[[C" and "^[[D", which appears to be the codes for just the left/right arrow keys. Is there any way to get screen to recognize ctrl-arrow keys when using PuTTY? (FYI, I don't remember having this problem when using gnu-terminal in linux instead of PuTTY).

  Read the article

• mv directory to overwrite another

  - by gbjbaanb

  I may be going bonkers here, but I'm trying to move a directory to a new location, overwriting the contents (on Linux, using bash). Everytime I try it, it responds with "mv: cannot move `./src' to a subdirectory of itself" eg. I have: /src /new/dir/src /$ mv src/ new/dir/ If I delete the destination dir, then it works. I know I can move the contents of the source dir to overwrite the destination, but I'd like to use the same command to overwrite the destination if it already exists, or move the source if it doesn't.

  Read the article

• Smart Taskbar Is a Thumb Friendly Android Task Launcher

  - by ETC

  If you frequently use your phone one handed you’ll definitely want to check out Smart Taskbar, an add-on for Android phones that makes it easy to launch apps with the swipe of your thumb. Smart Taskbar tucks an application launcher on the side of your screen, out of sight. Swipe your thumb across the screen and it slides out like a dock, revealing five of your favorite apps in a toolbar across the top and your lesser used apps in the main panel below. It’s much easier to swipe to view your applications than it is to peck at the application icon on the home screen; Smart Taskbar is great for one handed launching. Search for “Smart Taskbar” in the Android Market to download a copy or hit up the link below to read more. Smart Taskbar [AppBrain] Latest Features How-To Geek ETC How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Smart Taskbar Is a Thumb Friendly Android Task Launcher Comix is an Awesome Comics Archive Viewer for Linux Get the MakeUseOf eBook Guide to Speeding Up Windows for Free Need Tech Support? Call the Star Wars Help Desk! [Video Classic] Reclaim Vertical UI Space by Adding a Toolbar to the Left or Right Side of Firefox Androidify Turns You into an Android-style Avatar

  Read the article

• Apache server doesn't create directory or file under www-data user [duplicate]

  - by Harkonnen

  This question already has an answer here: What permissions should my website files/folders have on a Linux webserver? 4 answers very newbie to Apache here I installed Apache 2.4 on my Arch server where I installed newznab (a newsgroups indexer). I have noticed that all files newznab needs to create are created under my login user, and not apache default user (www-data). I read here that it's bad security practice to allow www-data to write files. I agree. But as an apache newbie, I would like to know where (in the httpd.conf I suppose ?) the user allowed to write files can be configured, because I want another account to be allowed to write files instead of my main account.

  Read the article

• What tools should every programmer know?

  - by acidzombie24

  What are some tools every programmer know about? Some examples i thought were Source control. (No explanation needed) Profiler. Many could go without but its good to know how to use one when the occasion arise What else? I was thinking a bug report software but i havent used one so i wasnt sure. Should programmers know how to use TRAC? I remember in the past a person telling me if i was making a shared library i should know (Some Name) which generates docs from the source (in that case C++). What was that called and what else should i know about? -edit- what about team management software? any software you could not live without in a specific project would be a good mention. I'll also mention i use VMs frequently during the prototype or end phase to see if there are any issues on a clean XP or linux distro and if i forgot anything in my redistribution. I cant imagine the end/release and testing phase of a project without a VM.

  Read the article

• Modernising settings, packages

  - by Sam Brightman

  The update manager (possibly combined with the janitor) does a reasonable job of bringing packages up to date with a new release, removing ones that are replaced by different projects etc. However, I'm left with the lingering feeling that quite a few settings are lingering from old releases. For example, some packages may be left around that I installed myself whereas now the functionality is provided by default. Another example is that my user doesn't get the new theme, and the panel bar is a mess. I can compare against an inactive user on the same system: everything seems tidier. There are also things like the explosion of System Preferences, user groups (inactive user, more recently created, is in groups that the older, active user isn't). In other areas (e.g. default font) I do seem to get given the new defaults. Another example is Spotlight-equivalent search. I remember Beagle and Tracker, I remember removing tracker when it used all system RAM and swap for 2 entire release cycles, but I don't know what I'm "supposed" to be using now. Is there even a default indexing-search installed and exposed? aptitude install ubuntu-desktop doesn't do anything, so the basics are in place package-wise. Is there any way to update my settings to the modern "Ubuntu way" without reinstalling from scratch? Can I do so selectively i.e. show the differences? Most of the time package management on Linux is an absolute joy compared to the alternatives, but if the desktop gets messed up after only a release or two, we're back to reinstalling just like Windows.

  Read the article

• Booting Ubuntu 12.04 in Unity the Windows Theme & Icon Theme reversed back to and always locked to Ubuntu default

  - by Antonio

  I did set up last year Faience-Ocre as my Icon Theme and Adwaita Cupertino L Unity as my Windows Theme (the GTK+ thme was unchanged to Adwaita (default)). It has worked perfectly well until 3 days ago when starting my PC I saw the Ubuntu default showing up for Windows & Icon Theme. I noticed that at start-up the disk access LED is not lit up continuously as before but at moment stops reading for a few seconds (up to 15 s) then complete the disk reading process. When all was working well this LED would lit up continuously. Another thing is that GNOME applications are as well not working well as previously Nautilus and Gedit now don't use the global menu in the system bar but a local window menu. Nautilus - Nemo before the incident Nautilus - Nemo now ... I did open dconf to check the desktop settings in org-gnome-desktop-wm-preferences and everything is looking good. When I change the settings in the app Advanced Settings in the Theme folder I see the respective value changing in dconf. However, there is no change on my desktop. It looks like it's crippled and GNOME related. [Update 1]: I have the same defect as referenced @ ubuntu theme suddenly changed to default and it's not coming back! instead of my GTK theme I get a classic, Windows-95-like grayish theme ... However one of the solution mentionned: http://www.webupd8.org/2011/06/fix-ubuntu-linux-mint-theme-changing-to.html is not working at all, even for 20 s up to 60 s delay.

  Read the article

• Solutions for Project management [closed]

  - by user14416

  The team consists of 3 people. The method of development is Scrum. The language of the project is C++. The project will be under the control of the git system. The start up budget is 0. The following things have to be chosen: Build and Version Numbering Project documentation ( file with the most common info for current stage of the project, which will be changed every time the new version or subversion of the project emerges ) Project management tool ( like Trac or Redmine, I cannot use them, because there is no hosting ) Code documentation ( I consider Doxygen ) The following questions have arisen: What can you add to the above list of the main solutions for project management in the described project? One of three project participants has linux os (No MS Office), one has Windows and MS Office (does not want to use Libre or Open Office), one has Windows, but does not have MS Office. What formats, tools can u suggest using for project documentation? The variant of using online wiki does not fit, it must be files. OneNote mb is a good tool for project management, but because of the reason mentioned above it is not possible. What can you advise? Offer a system for Build and Version Numbering.

  Read the article

• Sony Vaio dead keyboard

  - by Filip Górny

  I have strange problem with my almost new laptop. Aftear I leave it turned on for some hours and back to use it, it was printing something like ^[[2~ on the screen and I cannot stop it. After rebooting it did not show any activity. After few hours I managed to turn it on by hiting random keys at keyboard. I starts that way but I have to use external keyboard to type anything. When I randomly stroke the keys when is turned on, it sometimes print that unrecognised characters. It works the same way at linux and windows (ubuntu, windows 7). What can be the reason it started to work so strange and is there anyway to fix it without sending it to warranty and waiting few weeks? :/ I dont remember to make it wet, but they may be something like cigaretes ashes in it, I could not remember...

  Read the article

• associate dhcp requests with subdomains in dnsmasq

  - by Dezra

  I have dnsmasq running as a dns server with a number of linux boxes using static ips that run several virtual hosts on subdomains. I currently have the following address line in my dnsmasq.conf to map the subdomain of a boxes address to the boxes static ip: address=/.devbox1.mydomain.com/192.168.1.3 address=/.devbox2.mydomain.com/192.168.1.4 e.g. site1.devbox1.mydomain.com > maps to devbox1 static ip, site1 virtual host site2.devbox1.mydomain.com > maps to devbox1 static ip, site2 virtual host site3.devbox2.mydomain.com > maps to devbox2 static ip, site3 virtual host I was wondering if I can change the machines over to DHCP addresses (instead of static) and have dnsmasq use the dhcp ip instead of the static one? Can I modify the address line to refer to the DHCP address (obviously, I cant hardcode the address)? I know I could add mac address to ip allocation, but I want to avoid this if possible.

  Read the article

• P4 vs. i3/i5 *T in power consumption and performance [migrated]

  - by Walter Zomb

  I am running an Intel P4 prescott with HT on my home server (linux file server on encrypted disks on software-RAID5 and virtualisation host for three further machines). The performance for this purpose is really okay. When the system is idle it consumes about 140W power. I am considering buying a new mainboard for an e.g. Intel i3-2100T or an Intel i5-2390T. Both are low power CPUs with a TDP about 40W. Has anyone experiences how much power a recent mainboard with one of these CPUs an 3-4 'green-energy' disks (6W each) consumes? Do I get underneath the 100W threshold? What's about the performance of these low power CPUs? Are they comparable to an Intel P4 with HT? regards, walter

  Read the article

• Will BIOS boot mode Ubuntu install be able to boot when firmware "Fast Boot" is "Ultra Fast"?

  - by Pro Backup

  I have an AsRock mainboard with UEFI BIOS P1.50 02/14/2014. The firmware "Fast Boot" option is set to "Fast", Boot Option #1 is set to "AHCI P4: OCZ-VERT...": this is BIOS not UEFI boot. This boot disk has an MBR partitioning scheme (# parted -l | grep Partition\ Table:). Therefore Ubuntu 14.04 is installed in BIOS/CMS (Grub-PC) mode. The Ubuntu boot process ends in a text console (no GUI). There is no external graphics card in use. The stock Ubuntu kernel is replaced with Ubuntu supplied mainline 3.16.0-031600rc6-generic. dmesg outputs lines containing BIOS, like: SMBIOS 2.7 present Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored BIOS EDD facility v0.16 2004-Jun-25, 0 devices found The ASRock BIOS it selves display this help text for "Ultra Fast - Fast Boot": Ultra Fast mode is only supported by Windows 8 and the VBIOS must support UEFI GOP if you are using an external graphics card. Please notice that Ultra Fast mode will boot so fast that the only way to enter this UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows. Assumptions: I suspect after changing UEFI setting "Fast Boot" to "Ultra Fast" that the machine will no longer boot into Ubuntu's console. I expect when first exchanging "Grub-pc" with "Grub-efi", that the machine will still be able to boot to a grub menu (thus allowing to change the "Fast Boot" setting back to "Fast" without clearing CMOS). Are these two "Fast Boot" assumptions correct, and/or, may I expect Ubuntu 14.04 running mainline kernel 3.16rc6 and Grub-efi to still boot to console after enabling UEFI Ultra Fast Boot?

  Read the article

• Friday Tips #5

  - by Chris Kawalek

  Happy Friday, everyone! Following up on yesterday's post about Oracle VM VirtualBox being selected as the best virtualization solution for 2012 by the readers of Linux Journal, our Friday tip is about that very cool piece of software: Question: How do I move a VM from one machine to another with Oracle VM VirtualBox? Answer by Andy Hall, Product Management Director, Oracle Desktop Virtualization: There are a number of ways to do this, with pros and cons for each. The most reliable approach is to Export and Import virtual machines: From the VirtualBox manager, simply use the File…Export appliance menu and follow the wizard's lead. Move the resulting file(s) to the destination machine; and Import the VM into VirtualBox. This method will take longer and use more disk space than other methods because the configuration files and virtual hard drives are converted into an industry standard format (.ova or .ovf). But an advantage of this approach is that the creator of the virtual appliance can add a license which the importer will see and click-to-accept at import time. This is especially useful for ISVs looking to deliver pre-built, configured and tested appliances to their customers and prospects. Thanks Andy! Remember, if you have a question for us, use Twitter hashtag #AskOracleVirtualization. We'll see you next week! -Chris 

  Read the article

• Raspberry Pi stuck at splash screen

  - by Matthew

  I have a raspberry pi and I am stuck at the splash screen. In the top right of the screen there is an image of a Raspberry. When I first power on the device, I get the colored screen, and then I get the image of the raspberry followed by a white cursor which quickly freezes or disappears. I put on the debian version of wheezy that allows java. (the soft float version) Any assistance would be greatly appreciated. BTW I did have it working at one point in time and all I did was go to the terminal (logged out of the GUI) and did a shutdown -h now command. But since then I've even started with a brand new version of the image and it is still not working. Oh and I did try the same SD card with a version of arch linux and it worked fine.

  Read the article

• Ubuntu Wireless card not found

  - by user32121

  Hello all, I'm trying to setup Ubuntu on an old PC. I ran the following command, lspci, in order to get info on the wireless card installed. 00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03) Does anyone know where I can get drivers for this card/chip? And also, how to install (I'm rather new to linux). Also, I'm sure the card is working because I just formatted over xp, and everything was working well. Thanks in advanced!

  Read the article

• How to convert eps file to a large jpeg image

  - by Anand

  Hello, I am using Linux. I want to convert an eps file to jpeg file. I find that I can use "convert" command. However, the resulting image looks very small. I want to enlarge the jpeg file by -resize option. It seems not to work. The resulting image is a pure black one. Do anyone has the same problem? Here are more details: 1: if I use convert -scale 1000x1000 your.eps your.jpg the resulting image looks like a low quality image. The eps vector image is not scaled properly. 2: if I use convert -geometry 300% your.eps your.jpg I get a pure black image. Here is my phf file: 2shared.com/document/RXl2Be-g/askquestions.html and my eps file: 2shared.com/file/qrmwKegj/askquestions.html Thank you very much for your help!

  Read the article

• Can somebody help me install this jBPM based workflow management suite?

  - by Eternal Saint

  1.Its a book Workflow Interface software available at sourceforge http://bookworkflowint.sourceforge.net/ Any instructions on installing and configuring it would be great especially in windows, however I can try Linux specific ones as well. I could not find any installation instructions. I posted this in stackoverflow by mistake and was directed here. 2.Can you guys suggest any good scanning/digitization workflow software (document imaging) that I can adopt to my scanner software? Infact even a simple one would do may be based on hotfolders. I just want to be able to track the uniqueid/barcode of the scanned book, its status so that its not scanned again. It books or manuscripts could be in millions page count. I thought of using some kind of generic bug tracking tool, just track a few fields, dont know if its the right choice Thank you very much

  Read the article

• Automatic Site Creation

  - by Eddy Freeman

  I have created a platform that i want users to sign up and a new site is created for them instantly. Users will register and afterwards they will receive a username and password for their personal site. The system will work like ecommerce platforms such as www.shopify.com, www.bigcommerce.com, etc.. where users sign up and a new web-shop is created for them instantly. I have been searching for a while how i can create a script to automate this task but couldn't find any tutorials. Am using LAMP (Linux, Apache, MySql and PHP). Am asking if someone can guide me how to write such script or maybe point me to a tutorial or a book or probably similar scripts to automate this task. Sorry if this place is wrong for this question. thanks for your help.

  Read the article

• How can I keep a file in Windows 7's cache?

  - by netvope

  Sometimes you know better than Windows what files will be re-used later. Suppose you have 8GB of memory, and you use the same 1GB file every hour in an I/O-bound application (which takes 1 second to finish if the file is cached, and 1 minute if not.) Now you process some other 16GB of data that are not going to be re-used. Naturally the frequently used 1GB file will be pushed out of the cache. It would be beneficial if one can tell Windows to keep that 1GB file in memory. (Better yet, it would be great if I can tell Windows not to cache those 16GB of data, but I'm not optimistic that this can be done.) The poor-man's way to keep a file in the cache would be to keep reading the file. Are there any better ways? Are you aware of any programs that do this? (If this can be easily done under Linux, please let me know too.)

  Read the article

• How to move a windows machine properly from RAID 1 to raid 10?

  - by goober

  Goal I would like to add two more hard drives to my current RAID 1 setup and create a RAID 0 setup on top of the two RAID 1 setups (which I believe is referred to as "RAID 10"). Components Involved Intel P68 Chipset Motherboard 4 SATA ports that can be configured for Raid An intel SSD cache that sits in front of the RAID, and a 64 GB SSD configured in that manner Two 1TB HDDs configured in RAID 1 OS: Windows 7 Professional Resources Consulted so far I found a great resource on LinuxQuestions.org for a good "best practices" process for Linux machines, but I'd like to develop a similar process that I know works on Windows Machines.

  Read the article

• PowerBroker (Likewise-Open) + Ubuntu 13.04 -> 13.10 Upgrade

  - by JoBu1324

  I just upgraded Ubuntu from 13.04 to 13.10, and now I can't log into Active Directory; my system is integrated using PowerBroker Identity Services (PBIS), which used to be called Likewise-Open. So far I have identified the following symptoms: I am able to log in with my credentials via ssh. The screen goes black when attempting log into my account via the login screen. I've tried leaving the domain, purging PBIS, and re-installing the latest version of PBIS. I've been trying the troubleshooting section I found here, but I haven't had any success. The relevant portion of the auth.log Oct 22 09:30:26 mypc lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "myusername" Oct 22 09:30:29 mypc lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm Oct 22 09:30:29 mypc lightdm: pam_unix(lightdm:session): session opened for user myusername by (uid=0) Oct 22 09:30:29 mypc lightdm: pam_unix(lightdm:session): session closed for user myusername Oct 22 09:30:30 mypc lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0) Oct 22 09:30:30 mypc systemd-logind[718]: New session c5 of user lightdm. Oct 22 09:30:30 mypc lightdm: pam_ck_connector(lightdm-greeter:session): nox11 mode, ignoring PAM_TTY :1 Oct 22 09:30:31 mypc dbus[535]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.129" (uid=110 pid=5139 comm="/usr/lib/x86_64-linux-gnu/indicator-keyboard-servi") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.39" (uid=0 pid=2024 comm="/usr/sbin/console-kit-daemon --no-daemon ") My .xsession-errors log Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. /usr/sbin/lightdm-session: 5: exec: init: not found

  Read the article

• Cross-Platform Migration using Heterogeneous Data Guard

  - by Roy F. Swonger

  Most people think of Data Guard as a disaster recovery solution, and it certainly excels in that role. However, did you know that you can also use Data Guard for platform migration under some conditions? While you would normally have your primary and standby Data Guard systems running on the same OS and hardware platform, there are some heterogeneous combinations of primary and stanby system that are supported by Data Guard Physical Standby. One example of heterogenous Data Guard support is the ability to go between Linux and Windows on many processor architectures. Another is the support for environments that are running HP-UX on both PA-RIsC and Itanium hardware. Brand new in 11.2.0.2 is the ability to have both SPARC Solaris and IBM AIX on Power Systems in the same Data Guard environment. See My Oracle Support note 413484.1 for all the details about supported platform combinations. So, why mention this in an upgrade blog? Simple: much of the time required for a platform migration is usually spent copying files from one system to another. If you are moving between systems that are supported by heterogenous Data Guard, then you can reduce that migration downtime to a matter of minutes. This can be a big win when downtime is at a premium (and isn't downtime always at a premium? In addition, you get the benefit of being able to keep the old and new environments synchronized until you are sure the migration is successful! A great case study of using Data Guard for a technology refresh is located on this OTN page. The case study showing CERN's methodology isn't highlighted as a link on the overview page, but it is clickable. As always, make sure you are fully versed on the details and restrictions by reading the available documentation and MOS notes. Happy migrating!

  Read the article

• Installing maven on Ubuntu by manual download

  - by WebDevHobo

  To install Maven, I downloaded the latest version from the website and then followed these steps: http://maven.apache.org/download.html#Installation The last step, the version control, does not work. It says that 'mvn' is currently not installed and that I should type sudo apt-get install maven2 If I go directly to the mvn file itself, it does work: root@ubuntu:~# /usr/local/apache-maven/apache-maven-2.2.1/bin/mvn --version Apache Maven 2.2.1 (r801777; 2009-08-06 12:16:01-0700) Java version: 1.6.0_21 Java home: /usr/java/jdk1.6.0_21/jre Default locale: en_US, platform encoding: UTF-8 OS name: "linux" version: "2.6.32-25-generic" arch: "i386" Family: "unix" So, what am I doing wrong here? Or what would and apt-get install do extra that I might have forgotten?

  Read the article

• Cannot boot into ubuntu 12.10

  - by sriram

  Below given are the steps which I followed to install ubuntu 12.10 with existing windows 8 in my machine. I downloaded ubuntu 12.10 into my disk and made it bootable from my usb by selecting that iso file. Then restared my mahine and in BIOS I selected boot from usb. Went into Linux os and selected install ubuntu alongside windows 8. It asked for memory allocation and I selected 550 GB for Ubuntu and 404GB for Windows. After that it completed ubuntu installation. The booted into my windows 8 and used easyBCD to add a new entry. Ubuntu grup2 Now the easyBCD shows, There are a total of 4 entries listed in the bootloader. Default: Windows 8 Timeout: 10 seconds EasyBCD Boot Device: C:\ Entry #1 Name: Lenovo Recovery System BCD ID: {e58d0cb6-2eae-11e2-9d20-806e6f6e6963} Device: \Device\HarddiskVolume3 Bootloader Path: \EFI\Microsoft\Boot\LrsBootMgr.efi Entry #2 Name: EFI USB Device BCD ID: {e58d0cb5-2eae-11e2-9d20-806e6f6e6963} Device: Unknown Bootloader Path: Entry #3 Name: Windows 8 BCD ID: {current} Drive: C:\ Bootloader Path: \windows\system32\winload.efi Entry #4 Name: Ubuntu 12.10 BCD ID: {6f173570-3bce-11e2-be74-c0143dd589c0} Drive: C:\ Bootloader Path: \NST\AutoNeoGrub0.mbr Next I restarted my system and in the boot options it shows windows 8 and ubuntu 12.10 When I click on ubuntu it displays, \NST\AutoNeoGrub0.mbr status 0xc000007b The application or operating system cold not be loaded because a required file is missing or contains errors. Can you help me resolve this... Thanks :)

  Read the article

< Previous Page | 891 892 893 894 895 896 897 898 899 900 901 902  | Next Page >