Search Results

Search found 97876 results on 3916 pages for 'user folder'.

Page 897/3916 | < Previous Page | 893 894 895 896 897 898 899 900 901 902 903 904  | Next Page >

• SATA HDD not recognized by BIOS after Windows 7 reinstall

  - by RoliSoft

  I got Win32.Virut.56 virus, which is a very nasty stuff. I reinstalled my Win7, but it reappeared somehow. After hours of headache, I was able to remove it by booting into a live Ubuntu and running CureIT using Wine. I then started reinstalling Windows 7. After the "expanding files" stage it rebooted, however from that point on, my 160 GB Western Digital SATAII hard drive was not recognized. The bios just freezes at "SATAII 1: Detecting...". My other 1.5 TB Seagate SATAII hard drive works correctly. I tried switching cables; that didn't help. I googled this issue, but what came up were usually firmware problems. I can't update the firmware or do anything at all, because if I plug it in, it won't start. My motherboard is an ASRock 4Core1333-Viiv, if that helps. I'm now stuck on a live Ubuntu. I can't install Win7 on the 1.5 TB drive, because it's full of data I need. What do you think I could try to make the hdd work again? As for the moment, I don't have another computer to try if that one recognizes the hdd.

  Read the article

• Stop yahoo from opeing in second tab when opening chrome

  - by sam

  I recently downloaded Vuze (torrent client), which as well as installing, installs a whole bunch of rubbish toolbars (mostly by an outfit called 'Spigot') and tries to change your default search engine to Yahoo. In Safari and Firefox, ive managed to change it back but i Chrome although ive deleted all the addons and restored my default search engine when ever i open up Chrome i get two tabs 1) my default homepage and 2) yahoo search page. Any idea were i can disable this Yahoo search page, ive looked in the settings but could find any where obvious (ive set back my default search engine to Google and deleted any add ons) but this still dosnt do it.. any ideas ? My last resort is to do a factory reset of Chrome, which i dont want to do as i have all my settings in there.

  Read the article

• webmin bind issue- error when i try to start bind

  - by Arvind

  I am setting up a domain = mydomain.com with 2 nameservers ns1.mydomain.com and ns2.mydomain.com in Webmin - BIND. For this, I have registered 2 child nameservers at my domain registrar, and in Webmin-Bind I have set up a new zone for this domain. In this zone, i have specified 2 nameserver records- one each for ns1 and ns2. Also, I have defined 2 address records- one each for ns1.mydomain.com -> IP Address #1 and for ns2.mydomain.com -> IP Address #2 However when I try to start BIND in Webmin, I get the following error-- Failed to start BIND : Starting named: Error in named configuration: zone mydomain.com/IN: has no NS records zone mydomain.com/IN: not loaded due to errors. _default/mydomain.com/IN: bad zone [FAILED]

  Read the article

• Tap to click on OS X login screen

  - by Nano8Blazex

  I'm using Snow Leopard, on a macbook pro... Is there any way to "tap to click" (on the trackpad) instead of pressing down on the trackpad when interacting with the login screen? It's not really that big of a deal, but I'm curious. Thanks.

  Read the article

• Microsoft Access 2007 books

  - by tintincute

  I would like to ask your suggestions, if you know any good books for Microsoft Access 2007, including the migration from old versions to new versions.

  Read the article

• Cannot Install Bootcamp on Mac Fusion Drive

  - by user3377019

  I have two drive installed in my mid-2013 Macbook pro. It is running osx maverick. I set the two drives (an ssd and a regular HD) up using the fusion drive (following the diy fusion drive guides out there). I went ahead and created a 40gb partition to host my windows install. I removed the SSD, installed windows, then reinstalled the SSD. As soon as the ssd was placed back in the bootcamp partition stopped booting. I get a blinking cursor on a black screen. I checked out the partition info in disk utility and it appears that the windows partition is not marked bootable. Below is some info I managed to gather. I am wondering if there is a way to fix the partition table so my bootcamp will boot. /dev/disk0 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *120.0 GB disk0 1: EFI EFI 209.7 MB disk0s1 2: Apple_CoreStorage 119.7 GB disk0s2 3: Apple_Boot Boot OS X 134.2 MB disk0s3 /dev/disk1 #: TYPE NAME SIZE IDENTIFIER 0: GUID_partition_scheme *500.1 GB disk1 1: EFI EFI 209.7 MB disk1s1 2: Microsoft Basic Data BOOTCAMP 40.0 GB disk1s2 3: Apple_CoreStorage 459.2 GB disk1s3 4: Apple_Boot Boot OS X 650.0 MB disk1s4 /dev/disk2 #: TYPE NAME SIZE IDENTIFIER 0: Apple_HFS Macintosh HD *573.4 GB disk2 Name : BOOTCAMP Type : Partition Disk Identifier : disk1s2 Mount Point : /Volumes/BOOTCAMP File System : Windows NT File System (NTFS) Connection Bus : SATA Device Tree : IODeviceTree:/PCI0@0/SATA@1F,2/PRT1@1/PMP@0 Writable : No Universal Unique Identifier : 584BAED6-4C46-4F18-93B3-957F6E27003C Capacity : 40 GB (39,998,980,096 Bytes) Free Space : 16.34 GB (16,339,972,096 Bytes) Used : 23.66 GB (23,659,003,904 Bytes) Number of Files : 86,424 Number of Folders : 0 Owners Enabled : No Can Turn Owners Off : No Can Be Formatted : No Bootable : No Supports Journaling : No Journaled : No Disk Number : 1 Partition Number : 2

  Read the article

• Remove Desktop entry from alt tab list

  - by MichaelM

  Hi I would like to know whether it is possible to remove the entry for desktop from Windows 7's alt-tab list? So far I have found a post telling me to add an entry to the registry: HKEY_CURRENT_USER/Software/Microsoft/Windows/CurrentVersion/Explorer/AltTabSettings However, this reverts the alt-tab menu back to the Windows XP style, where you don't get window previews. All I really want is for the desktop entry to be gone. Cheers.

  Read the article

• How to skip words in OS X terminal?

  - by Yuval

  Say I wrote a long command in the Mac OSX terminal, i.e say "Hello, how are you? I am good thank you. How is it going with you? Fine, thanks" and now I decided I want to change the word Hello to Hi. To do that, right now I have to keep pressing (or hold down) the left keyboard key until the "cursor" gets to the end of the word Hello, and then delete it. The usual 'holding down option' technique doesn't work as it does in most other OS X applications. Is there a way to skip a word at a time instead (or any other shorter way of getting the cursor there)? Thanks!

  Read the article

• How to repair the boot selection on grub?

  - by Zignd

  I had installed on my computer as a dual-boot: Debian Squeeze and Windows XP, so I decided to install Windows 8 just to test and then I would remove it and install in its place Debian Wheezy as dual-boot with Windows XP, that was already installed. During the Debian Wheezy installation, I deleted the Windows 8 partition to install Debian W. on its place. The problem is, that after the installation finished I rebooted the computer and on the grub menu was written: Debian Wheezy and Windows 8 (loader) - this Windows 8 (loader) is a boot manager as grub, and after the Win8 installation I was capable of choose between Win8 and WinXP. And when I select Windows 8 (loader) it says the Windows 8 is corrupted and is not possible to boot Windows XP. So, after that, I would like to know, how can I get Windows XP on the grub menu? Because I know its there (the Windows XP), but I can not boot it from grub. Observation: I already tried update-grub, but it only finds Debian W. and Windows 8.

  Read the article

• How do I see a history of what I've POST-ed in Google Chrome?

  - by Tomas Lycken

  I just submitted a form that included a text box, in which I had written a quite long text. In another textbox, I filled in a date in the wrong format - and instead of getting an error message, the web site just acted as if my form submission was valid, except nothing was saved. Is there any way to see the history of what has been POST-ed (in the current session, at least), from where I can recover my lost text?

  Read the article

• How to make mouse wheel to scroll control under mouse cursor?

  - by skevar7

  Currently, mouse wheel scrolls the control that has keyboard focus. That's not good when window has several scrollable controls, because I have to click control first and then scroll. And the same again when trying to scoll another control. Especially bad, when that control has some action associated with click (like MSDN's article list - it opens new article on click). So, is there any tool to fix mouse scroll behavior?

  Read the article

• Migrating Outlook data with oracle connector for outlook

  - by amir shadaab

  I have a system which uses Oracle connector for MS outlook 2007. I recently bought a new system and I want to transfer al my email(the one that uses oracle connector) to another system with all the same settings. I know that during a normal transfer, I just need to transfer the .pst file and open it in another system. But I'm not sure how to go ahead with Oracle connector servers. Please help me out with this one.

  Read the article

• Change the default route without affecting existing TCP connections

  - by Patrick Horn

  Let's say I have two public network addresses on my server: one NAT through an ISP (192.168.99.0/24), and a VPN through a different ISP (192.168.1.0/24), already configured with a per-host route to the VPN server through my ISP. Here is my initial routing table. I am currently routing through my ISP on subnet 192.168.99.0/24. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.99.1 0.0.0.0 UG 0 0 0 eth1 55.66.77.88 192.168.99.1 255.255.255.255 UGH 0 0 0 eth1 192.168.99.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Now, I want new TCP connections to switch to my 192.168.1.0/24 so I type the following: $ route add -net 0.0.0.0 gw 192.168.1.1 dev tap0 When I do this, it causes some long-standing TCP connections to hang. Is there a way to I safely change the default interface for new connections, while allowing existing TCP connections to use the old route (i.e. do I need enable some sort of stateful routing table)? I am okay with a solution that only works with established TCP connections, and I don't care how hacky it is. For example, if there is a way to add temporary iptables rules for existing connections to force them over the old route. But there has to be some way to do this. EDIT: Just a note about a simple "route add -host ... " for existing connections: this solution would work if I am fine with leaving a subset of IPs on the old interface. However, in my application, this actually doesn't solve my problem because I want to allow new connections to come on the new interface even if they have the same source IP. I'm now looking at using the "ip route" command to set source-based routing rules.

  Read the article

• ibm 8305-29u Sound comes from internal speaker instead of green port - Ubuntu 10.04 LTS

  - by TecBrat

  The title pretty much says it all. My experience w/ubuntu is VERY limited. I did find the system test feature and ran an audio test. It found my device as Intel 82801DB-ICH4. I wasn't getting anything. I tried a couple of things and don't really even remember what I tried, but I started getting audio (not just beeps) from the system's internal speaker. Any ideas? (I can't rule out a hardware problem. This box sat under my bed for a couple of years and it's first life was in an environment FULL of cement dust.)H

  Read the article

• Error installing pygraphviz on OSX

  - by Neil

  I'm trying to get the graph-models to work (from django-command extensions) on Snow Leopard. It requires pygraphviz, which I installed via macports. After successful install I am getting this error: >>> import pygrahphviz Traceback (most recent call last): File "<stdin>", line 1, in <module> ImportError: No module named pygrahphviz >>> import pygraphviz Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/__init__.py", line 54, in <module> from agraph import AGraph, Node, Edge, Attribute, ItemAttribute File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/agraph.py", line 19, in <module> import graphviz as gv File "/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/graphviz.py", line 7, in <module> import _graphviz ImportError: dlopen(/Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so, 2): Symbol not found: _Agdirected Referenced from: /Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so Expected in: flat namespace in /Library/Python/2.6/site-packages/pygraphviz-1.1-py2.6-macosx-10.6-universal.egg/pygraphviz/_graphviz.so >>> Any suggestions?

  Read the article

• How to copy files from HDD to HDD with integrity checking

  - by RafaelM

  I am moving data from an almost dead HDD to an external USB drive using linux , because for some reason Windows cannot see the data. I want to copy a large amount of data over from the HDD to the USB drive with integrity checking. I thought about copying everything over and then checking with md5summer but this would take a reaally long time because its a lot of data and this is not a very powerful PC. What tool can use to do this on Linux?

  Read the article

• Lenovo Ideapad Y480 can't reinstall windows?

  - by elegantonyx

  Alright, so here's the deal... For a while, I wanted to mess with Linux. I don't know why, but I wanted to. So, what I did was use WUBI and install Ubuntu. Because of some unknown reason (Intel Rapid Start? Half the drivers being on a Lenovo-installed SSD [separate from the main hard drive]?) it wouldn't dual boot. So, I decided to use Linux Mint instead, and install it in a partition. Since Windows 7 Home Premium won't make partitions any more if you have a certain number already, I just shrank my system drive and left empty space for the installer to claim. When I installed Mint, it worked, but left my Windows 7 installation unable to boot and eventually it corrupted. I tried to use a system repair disc I burned earlier but it didn't find the Windows installation, so I assume the partition corrupted. I used this link:http://www.pcworld.com/article/248995/how_to_install_windows_7_without_the_disc.html to try and reinstall Windows. What happened was that originally it said that the partition I was trying to reinstall from had been locked down by the OEM (Lenovo). So, I went into GParted, wiped EVERYTHING, and selected 'Construct new Boot record' or whatever that function is, and now the error is: "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." Does anyone know how to see the log files? Can anyone help? This system is a month old but the warranty only covers hardware failures, and I would need to pay around USD$60 for them to fix it. Please help. Any ideas? this is my main machine... Extra information: I have at my disposal: System Repair Disc (Burned myself) Windows 7 Home Premium 64 bit SP1 installation disk (burned from the pcworld links) Gparted Live CD Linux Mint 13 live cd A system backup (from the morning before this catastrophe) made using the Windows Backup and Restore. I put it on an external drive...that should be safe for now.

  Read the article

• Fine control over zoom and aspect ratio in VLC player

  - by ashh

  In VLC Player (v1.01), how do I zoom video and control aspect ratio with fine control, as is possible with Media Player Classic Home Cinema (MPCHC)? The standard zoom appears to only support double, normal, quarter size etc, not useful to me at all. An example: I play an older music video file that is in 4:3 aspect ratio. In MPCHC I can use the number pad to zoom in small increments until I have removed the left and right letterbox bars and the video fills the whole screen. I can also stretch and move the video in small increments until I am happy with the aspect ratio and position. I could continue using MPCHC, but I have two displays and really like VLC feature enabling full-screen video on the main screen and the VLC interface (menus etc) on the second. I have not found a way to do this on MPCHC, if anyone knows I'd also be interested to hear.

  Read the article

• running chkdsk on a disk without a drive letter

  - by neubert

  I have a hard drive that shows up in Disk Management as having two partitions. One of the partitions says 69.71GB and that's it. The other says 4.82GB and, underneath that, Healthy (OEM Partition). I'm trying to do chkdsk on the 69.71GB partition and am unsure of how to do it without a drive letter. Any ideas? It's an NTFS partition that's gotten corrupted. Linux's ntfsfix spits out a bunch of errors so I'm thinking chkdsk might be better. Thanks

  Read the article

• Python version priority in OSX/UNIX PATH environment variable

  - by mindthief

  Hi all, I want my system to use /usr/bin/python, but it's currently using /opt/local/bin/python, which points to /usr/bin/python2.6. I tried modifying the PATH variable in my .bashrc as PATH=~/bin:$PATH ...and then set a symbolic link in ~/bin to point to /usr/bin/python. i.e. ~/bin/python --> /usr/bin/python I figured this might prioritize this symlink over the /opt/local version if it came before the other one in the PATH variable, but when I opened a new shell I still found python pointing to /opt/local/bin. Any advice on a good way to get the system to use /usr/bin/python? Also, I usually use ipython as opposed to python directly. I'm assuming that if the system starts to use the correct version of python then ipython would also use that version? If not, how could I also get ipython to use the correct version? Thanks!

  Read the article

• how to tune libstdc++ to the native architecture when building gcc

  - by John D

  I recently found that when I build my C++ software, I get about a 10% speedup by using the g++ march=native option. When compiling gcc and libstc++, is it possible to tune the libstdc++ library to the native architecture as well? I couldn't find any mention of this in the gcc install configuration documentation. (I'm building gcc 4.6.2 on Linux Mint 11 with an Intel Core i7 Sandy Bridge-E processor.)

  Read the article

• What does the -R flag do for chflags?

  - by ralphthemagician

  I'm not clear on exactly what the -R flag does for chflags. I was wondering if someone might be able to help me. The man page says this: Recurse: Change the file flags of file hierarchies rooted in the files instead of just the files themselves. I don't understand what that means. Can someone tell me what the difference would be between chflags -R hidden and just chflags hidden? There's an online man page here for reference: http://ss64.com/osx/chflags.html

  Read the article

• Windows 7 Forbid connecting to a specific wireless network

  - by Elliot

  Does anyone know how to tell windows 7 to bar a wireless network? It keeps logging into a random open one with no bandwidth my neighbors have instead of the good one we have here. I keep unchecking "automatically log in if available" and it keeps re-checking itself. I want it to NEVER log into this network no matter what without manual intervention. I do not want to disable auto connecting, just tell it "do not ever connect to this one without my express permission".

  Read the article

• Custom resolution - Windows 7 - no drivers

  - by Vytautas Butkus

  I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

  Read the article

• No space left on device with encrypted disk that takes all space

  - by Yosef

  I use Ubuntu 11.04. There's no space left on device. I have encrypted the disk that takes up space (maybe it's good to disable it, but I don't know how). In shell, I get this message: No space left on device I run df -I: Filesystem Inodes IUsed IFree IUse% Mounted on /dev/sda1 3055616 602499 2453117 20% / none 210161 890 209271 1% /dev none 214789 8 214781 1% /dev/shm none 214789 53 214736 1% /var/run none 214789 3 214786 1% /var/lock /home/myuser/.Private 3055616 602499 2453117 20% /home/myuser df -I Edit: When I run only df: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda1 48060296 45618928 0 100% / none 1538340 684 1537656 1% /dev none 1547596 808 1546788 1% /dev/shm none 1547596 104 1547492 1% /var/run none 1547596 0 1547596 0% /var/lock /home/myuser/.Private 48060296 45618928 0 100% /home/myuser Edit: I thinking about few solution but I don't know which better and how exactly to do them: to enlarge partition size (I cant install gparted - no more disk space) remove encryption of partition - I really not need that

  Read the article

< Previous Page | 893 894 895 896 897 898 899 900 901 902 903 904  | Next Page >