Search Results

Search found 306 results on 13 pages for 'bsod'.

Page 9/13 | < Previous Page | 5 6 7 8 9 10 11 12 13  | Next Page >

• Switching from Windows Virtual PC to VirtualBox without formatting

  - by djechelon

  I have a Win7 virtual machine running on Windows Virtual PC where I'm currently developing. I found that I dislike WVPC, and installed VirtualBox, hoping for better performance. However, importing the existing VHD into a new VM seems to not work, because even if I see the Windows boot screen, the OS will crash on a BSOD and requires the restore tool to run. That tool finds no problem, reboots but the BSOD is still present. I wouldn't like to format a new VM if possible. Is it possible to do such switching?

  Read the article

• sysprep'd Server 2008 R2 VMware autocheck BSODs

  - by slag

  I'm trying to set up a template Server 2k8 R2 (Standard) VM in our VMware ESXi environment, we'll need to deploy a whole lot of them and I want to (a) streamline and (b) standardise the server build process. Originally I built a sysprep answer file using WAIK and the Windows System Image Manager - once I'd run sysprep using this, restarting the machine resulted in a "autochk.exe not found - skipping autocheck" message, followed almost immediately by a BSOD. Rebooting just resulted in the same thing. I first assumed it was my answer file, but have now checked this on a physical machine and it works fine. I've reinstalled the OS on the machine (and NOTHING else), and run sysprep.exe (ticking Generalize) - this produces exactly the same result. I've also attempted to use the Customisation Wizard built in to VMware - again, the same autocheck message and BSOD is the result. Any ideas? Let me know any further information I need to provide...

  Read the article

• System failure - need diagnostic recommendation

  - by Ladislav Mrnka

  I have big problem with my computer. Configuration is: Intel i7 + 6x2GB OCZ DDR3 Motheboard: Asus P6T Deluxe V2, HDD controller configured to AHCI Main drive: OCZ Vertex 2 (SSD) - contains all installed programs and system Second drive: Samsung SpinPoint - contains User profiles, ProgramData, virtual machines and databases Third drive: Samsung SpinPoint - data drive + backups OS: Windows 7 Ultimate x64 I have never had any problem with this computer until now. During weekend my computer completely crashed without any reason. Each time I tried to boot to Windows I got BSOD with message BAD_SYSTEM_CONFIG_INFO and automatic restart (I didn't install any new SW or HW). But after restart main OCZ drive was disconnected (not detected by BIOS). When I turned off and on computer, the drive was again connected. It also happend every single time I tried to repair installation somehow. It ended with some error and after restart drive was disconnected. The only thing which worked was format + fresh install. After installing almost everything I wanted to install Visual Studio 2010 Ultimate (complete installation without SQL Server Express). During installation of VS itself I always get BSOD - it is too fast so I'm not able to read description. After restart it searches for all disk drives for really long time and sometimes it changes boot drive so the system is not able to start - Bootmgr not found. After reconfiguring BIOS the system starts. There is no event describing the failure in Event viewer. Installing VS 2010 is absolutely necessary for me. I need help with diagnostic. I need to find where is the problem - I expect that the problem is in OCZ drive or in HDD controller on motherboard but I don't know how to find it. All components still have valid warranty. Can you recommend me some approach or tools to find the problem? Edit: I'm still looking for source of the problem. New information is that Windows are not able to perform check disk (Chkdsk) on the SSD system drive. After restarting it always starts checking drive and in part where files are checked it fails with BSOD - BAD_SYSTEM_CONFIG_INFO. After next restart and skipping check disk tests the system runs.

  Read the article

• A Windows Update Prevented Live Discs From Working?

  - by user88311

  First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

  Read the article

• Here’s How to Create a Blue Screen of Death in Any Color You Want

  - by The Geek

  Everybody that’s ever used Windows has at least heard of the Blue Screen of Death, even if they have been lucky enough to never encounter one themselves. Here’s how to make a BSOD in any color you want, using a couple of clicks. Note: following the technique in this article WILL crash your PC, every single time. Without fail… it’s kinda the point, after all. Isn’t the black and green BSOD a lot more geeky? Keep reading at your own risk Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Lord of the Rings Movie Parody Double Feature [Video] Turn a Webpage into an Asteroids-Styled Shooting Game in Opera Dolphin Browser Mini Leaves Beta; Sports New GUI, Easy Bookmarking, and More Updated Google Goggles Scans Faster; Solves Sudoku Puzzles Snowy Castle Retreat in the Mountains Wallpaper Fix TV Show Sorting Issues on iOS Devices

  Read the article

• McAfee Virus Scan and Oracle RAC

  - by Lee Gathercole

  Hi, We're experiencing a strange problem with Oracle RAC and McAfee anti-virus. As part of the installation of the Oracle RAC we disable anti virus as directed. We have had our RAC running fine, but when we came to re-enable the AV and reboot we got the BSOD. Abnormal Program Termination (BugCheck, STOP: 0x00000035 (0x8E984678, 0x00000000, 0x00000000, 0x00000000 NO_MORE_IRP_STACK_LOCATIONS Following the standard process of raising this problem with Microsoft they identify the problem and also a fix. Microsoft talk about too many file filter drivers being present and pushing the DFS upper limit beyond the default size. Upping this value, as per msdn, has no impact. We're able to recover from this BSOD by disabling AV. We don't have the problem if we run the AV service manually whilst the system is up. However, if we make the service automatic we fail to boot. Tech Details 2 Node Oracle 10g Cluster 2 * Windows 2003 SP2, 16GB RAM, Quad Core 3ghz Processor SAN attached storage McAfee VirusScan Enterprise 8.5.0i, Scan Engine (5300.2777), DAT Version (5536.0000) Thanks Lee

  Read the article

• Win 7: apps crash, then explorer crashes, then services fail, then boom

  - by snorfys

  Periodically, every 2-3 days one of my systems will go haywire: every app will crash search will fail via the start menu and then explorer will fail. Restarting explorer via taskmanager will cause it to fail again, then it'll BSOD and restart. The eventlog for when this happens goes something like this every time: ERROR: Session "ReadyBoot" stopped due to the following error: 0xC0000188 (supposedly not a problem) WARNING: The maximum file size for session "ReadyBoot" has been reached... (forget where I found out, but also 'not a problem') ERROR: Session "Circular Kernel Context Logger" stopped due to the following error: 0xC0000188 (again, supposedly not a problem) WARNING: The maximum file size for session "Circular Kernel Context Logger" has been reached... ERROR: Faulting application name: Explorer.EXE, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: explorer.exe, version: 6.1.7600.16450, time stamp:... ERROR: Faulting application name: svchost.exe_iphlpsvc, version: 6.1.7600.16385, time stamp:... ERROR: The Service Name service terminated unexpectedly. It has done this 1 time(s) That last one happens a number of times but with a different service name. Then finally we have: ERROR: The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Server service, but this action failed with the following error: An instance of the service is already running. After that, I have my BSOD and logs complaining that windows started up without shutting down. It's a new machine: Intel i3 530 4gb RAM (Ran memtest for 4 hrs, no problems) 320GB WD/250GB Seagate HDDs (Happened on fresh installs on 2 separate HDDs) Win7 Pro/Ultimate x64 (wife's copy of pro, my copy of ult, no change) Fresh install + driver and windows update (happened without updates as well) I'm at a bit of a loss as to what I can look at next. Especially since it'll work like a charm for 2-3 days and then it's hooped for a night (I'm on it now in fact - no problems).

  Read the article

• Laptop seemingly randomly "freezes" to the point of no longer executing applications

  - by Aierou

  After upgrading to Windows 8 pro on my Samsung Series 7 Chronos NP700Z5C-S04US (may be relevant, I'm not sure), my computer began to stop allowing the execution of any service or application, as well as discontinuing the update of the clock until a hard shutdown was performed. This seems to occur randomly after periods of inactivity and I've no idea the cause. These are measures I have already taken in order to attempt to stop this: -Obviously Googling potential answers to this problem -Updating all drivers -Researching all events that have occurred around the time of the failure to respond (with no results) -I tried applying "bcdedit /set disabledynamictick no" which was a hotfix for what seemed to be the same error but was not. Here is some more, potentially related, information about the error: -No BSOD (actually, I haven't at all experienced a BSOD with Windows 8) -Computer seems to have a problem shutting down/restarting most of the time (Hangs at the point where it should completely turn off) -New sound instances are not able to play, but previously loaded containers function properly -As mentioned before, the clock freezes at the time of the error -USB devices function properly -Servers that I was running fail to respond on my end, but stay online. If you require more information, please request it specifically and I will be happy to oblige. Thanks.

  Read the article

• DBAN Hangs at PCI (sysfs)

  - by David

  I'm running Derik's Boot and Nuke 2.2.6 (beta). When I get to a blue screen(Not BSOD) the following is printed. Derik's Boot and Nuke 2.2.6 (beta) is starting. Waiting for USB devices to register..........................done. PCI (sys) After that, it just sits there forever... Any advice, other than an older version of DBAN? I have gotten this version of DBAN to work on an older machine before.

  Read the article

• What the hell was THAT?!?

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Best OS that never crashes

  - by Moon .

  which OS is there that never ever ever crashes or halts or does any stupid stuff like windows does..... means u never get to see BSOD....

  Read the article

• Hard freeze on new computer

  - by mphair

  OCZ Gold 3x2GB 240-Pin DDR3 SDRAM PC312800 Palit NE5T240SFHD01 GeForce GT240 1GB 128-bit GDDR5 ASUS P7P55D-E LGA 1156 P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor SAMSUNG 22X Optical drive (DVD+-R/RW) CORSAIR CMPSU-620HX 620W ATX12V V2.2 Windows 7 Ultimate x64 Brand new system (got it from newegg two days ago) and it booted up and installed windows and ran for a day just fine. Yesterday, I boot it up in the afternoon and run various games at full graphics for most of the day. I turn on WoW and play for a few hours and it hard stalls. No numlock switching, no mouse feedback but nothing going wrong on the screen. No BSOD. I wait a bit to see if the stall is just a temporary one, but then force shutdown the computer. Upon reboot, everything seems fine, windows sees that it didn't shut down properly but I go into normal boot and restart WoW. I'm able to load it up and start running around when it freezes again. This time when I restart, it doesn't even get to BIOS. It starts (power goes on) and it just hangs with no output to the monitors. I shut it off and went to bed. This morning, I turned it on and went into BIOS setup. I'm not terribly experienced with messing with BIOS settings but I checked over them the best I could. Everything seems fine so I boot into windows and browse the internet for a bit looking for a solution, hard freeze within 10 minutes. I restart and go into BIOS and check the CPU temperature, 40c. I'm kinda stumped here. Some people say it might be a memory issue, but why would it take so long for it to come up? Could it have been slowly accessing one memory stick at a time and then it just got to a bad one and that's what is causing it to fail? It seems odd that I don't get a BSOD from a hardware failure. Having the screen just halt with no input or output change seems like a software thing to me. Any thoughts?

  Read the article

• Windows integrity check

  - by crazybmanp

  is there any way to check and make sure that my windows installation is completely fine (i just had a BSOD and i just want peace of mind it wont happen again). i am running windows 7, but i often give help to others so if there is any utility that works like this on another OS, post it. (also does disk check do this, i have had troubles with the windows seven disk checker as part of the error described in KB975778)

  Read the article

• How did what appears to be a virus get on my computer? (explanation of situation enclosed)

  - by Massimo

  My system is Windows XP SP3, updated with the latest patches. The PC is connected to a Cisco 877 ADSL router, which does NAT from the internal network to its single static public IP address. There are no forwarded ports, and the router's management console can only be accessed from the inside. I was doing two things: working on a remote office machine via VPN and browsing some web pages on the Cisco web site. The remote network is absolutely safe (it's a lab network, four virtual servers, no publicly accessible services and no users at all; also, none of what I'm going to describe ever happened there). The Cisco web site... well, I suppose is quite safe, too. Suddenly, something happened. Strange popups appears anywhere; programs claiming they're "antimalware", "antispyware" et so on begins autoinstalling; fake Windows Update and Security Center icons pop up in the system tray. svchost.exe began crashing repeatedly. Then, finally, after some minutes of this... BSOD. And, upon rebooting, BSOD again. Even in safe mode. Ok, that was obviously some virus/trojan/whatever. I had to install a new copy of Windows on another partition to clean things up. I found strange executables, services and DLLs almost anywhere. Amongst the other things, user32.dll and ndis.sys had been replaced. A fake software called "Antimalware Doctor" had been installed. There were services with completely random names or even GUIDs (!), and also ones called "IpSect" and "Darkness". There were executable files without an .exe extension. There were even two boot-class drivers, which I'm quite sure are the ones that finally caused the system to crash. A true massacre. Ok, now the questions: What the hell was that?!? It was something more than a simple virus! How did it manage to attack my computer, as I am behind a firewall and was not doing anything even only potentially harmful on the web at the time?

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• How to remove RAID flag on unstriped drive without losing data?

  - by Alex Folland

  I have a Gigabyte Z68X-UD4-B3 motherboard. It advertises this new thing called "XHD", which is like RAID but makes a SSD and traditional-style drive work together to enable high speed with high capacity. I don't want to use this feature, and I already have Windows 7 64 installed without using this feature. When I first installed my 2 hard drives (1 SSD and 1 traditional-style drive) in my machine and booted it up for the first time, it ran a program from the mobo that asked me if I wanted to set up XHD. Thinking it would go to some config screen, I said yes. It immediately started doing something with my drives and finished. I considered that strange, but figured it wouldn't matter when I simply install Windows onto my SSD only. I now have my BIOS and Windows running in AHCI mode with no RAID arrays and separate drives. My SSD is one of those new Corsair Force GT drives which loses power every so often, causing Windows to BSOD. I've figured everything out about this problem, including installing the latest firmware from Corsair, and the only way to fix it at this point is by installing Intel Rapid Storage Technology to control AHCI instead of Windows, since the Windows AHCI driver disables the drive's power every once in a while and can't be configured not to do so. I've tried installing Intel Rapid Storage Technology. When I reboot my machine after doing so, it BSODs just after the Windows logo. I've figured out this is because my SSD and my traditional drive are flagged as RAID, as seen in the "Intel Matrix Storage Manager" program found by switching the BIOS hard drive handling to "RAID" mode. This is due to the XHD auto-config program I mentioned earlier. Normally, the BIOS is set to AHCI, and when the drives boot in AHCI mode, they work perfectly. So, I've concluded the data is stored in AHCI mode but the drives' flags are set to RAID. I've figured out that I can accomplish my objective by using the "Intel Matrix Storage Manager" program on the mobo (with "Reset disks to non-RAID"), but doing so would cause it to completely wipe the drives I select. I want to simply toggle these flags from RAID to AHCI so Intel Rapid Storage Technology doesn't fail and cause a BSOD upon booting, but without wiping the drives.

  Read the article

• my HP desktop with Windows Vista wont boot

  - by John

  It continues to loop to a BSOD and I cant get a dos prompt or repair screen, I dont have recovery disks but I have brought up a window, black, with gray title bar that is labeled Edit Boot Options, below that it has Edit Windows boot options for: Windows Vista (TM) Home Premium Path: \WINDOWS\system32\winload.exe Partition:1 Hard Disk: 1549f232 and then it has a place to enter something starting with one of these [ and one or two lines down it has ] what do i enter in this space and is there something i can enter that would help solve my boot up issues

  Read the article

• updating from windows 8 to windows 8.1 give me error 0x101 0x2000c and driver irql not less or equal on clean install

  - by user1143745

  i'm trying to update my hp dv6-6156sl running win 8 to win 8.1. When i try to update the os with all kept when it configures devices (around 55%) i get a bsod with driver irql not less or equal error and windows revert back to my previous windows 8 showing at the end 0x101 0x2000c error. So i tried a clean install to see if i could fix it but i still get the same driver irql not less or equal error (on ntoskrnl.exe) I tried to edit bios settings to see if there's something to disable but like almost all hp laptops it is locked so i can only enable virtualization, select boot order and change gpu between fixed or dinamic (none of these worked) i found the dmp file with the error of the update: https://dl.dropboxusercontent.com/u/2219086/setupmem.dmp How can i fix this?

  Read the article

• I have bluescreen-phobia

  - by Charlie Somerville

  I'm scared of the Blue Screen of Death. Seriously. Whenever I hibernate or shutdown my computer, I have to turn the screen off in case it bluescreens during that process. Whenever I see a bluescreen, it makes my heart skip a beat and I jump a little - especially if it's on my own computer. I decided that this is getting ridiculous after I experienced a BSOD this evening. My computer booted back up and I decided to switch off the screen and leave the room. I came back about a minute later and it still hadn't got to the login screen. To find out what happened, I actually covered the screen with two A4 pages and gradually peeled them back after I saw that the screen wasn't blue. This is going way too far, but I can't help it. I am legitimately afraid of BSODs. Does anyone have any advice on how I can help myself?

  Read the article

• Windows 7 Drivers for Hp Tx2000 tablet Pc

  - by iceman

  Has anyone tried the new tablet features of windows 7 on the Hp tablet TX2001au : http://h10025.www1.hp.com/ewfrf/wc/product?product=3653674&lc=en&dlc=&cc=us&lang=&softwareitem=ob-77258-1&dest_page=product&os=4062 ? Hp has only Vista drivers and no Windows 7 drivers yet : link and link The main issues after installing Windows 7 is that the graphics card (Nvidia GeForce Go 6150) and the coprocessor are not detected.The latest 191.07 GeForce/ION Driver installer says that it cannot find any compatible hardware by the way, i still haven't been able to get Xp running on this . The Nvidia GeForce Go 6150 driver seems to be customized by HP !! If you install the laptopvideo2go.com/ drivers on Xp(after MS nags that it can't verify the publisher of the driver) , it shows the blue screen of death. Is there a way to debug the BSOD ?

  Read the article

• inaccessible_boot_device after p2v Windows 2000 Pro SP4 to Workstation 6.5

  - by 20th Century Boy

  I am using the latest VMware Converter Standalone to p2v a physical Windows 2000 Professional SP4 PC. The PC is a standard Pentium with IDE disk from circa 2001. The disk is 20GB partitioned logically into C: and D. It converts with no errors (I did both disks into one VMDK). When I power on the VM in VMware Workstation 6.5 (or Vmware Player 2.5) it gets to the Win 2000 boot graphic then I get a BSOD with the classic 0x7B Stop error: inaccessible_boot_device. Is there anything I can do to get the vm to boot? I am lost for ideas, normally p2v of a basic IDE pc works flawlessly. I'm willing to put a bounty on this as I am trying to sort this out for a client urgently.

  Read the article

• Vista Startup Repair cannot repair my Toshiba Laptop (L300D)

  - by tdot

  I installed some updates, and now the computer doesn't boot up, it just keep's telling me to go to repair, which doesn't fix the problem. I see the BSOD on startup, but it flashes by too quick. (I also don't have Vista on DVD to do a reinstall if I need to) This is what I get from the Startup Repair details Problem Event Name StartupRepair V2 Problem Signature 01: External Media Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 2 Problem Signature 04: 131074 Problem Signature 05: BadDriver Problem Signature 06: NoBootFailure Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: unknown Problem Signature 10: 1168 OS Version: 6.0.6001.2.1.0.256.1 Local ID: 1033 Any help will be appreciated. Thanks.

  Read the article

• RDP Connection to XP from Windows 7 crashes part of XP

  - by Oliver Nelson

  I have some XP machines that my users RDP into. If I RDP into the machine from something other than a Windows 7 box, and then RDP into the machine with a Windows 7 box, the XP machines crash (not BSOD though). I get an event ID 1003 with these details: Error code 1000008e, parameter1 c0000005, parameter2 bf85b6b7, parameter3 b6149a88, parameter4 00000000. I have this happening on quite a few machines, and I can reliably reproduce it. I've found no way to fix it. If I only connect from Windows 7 machines, it never fails. Any suggestions? (I've checked color settings and basic RDP client settings, and they all seem to match between the Windows 7 Clients and the XP clients).

  Read the article

• Custom resolution - Windows 7 - no drivers

  - by Vytautas Butkus

  I'm having some problems with my VGA card. When I enable my VGA drivers and boot windows up they crash and I get message that the problem occured with atimdag.sys drivers or smth like that. I'm gettin BSOD all the time, unless I go to control panel and I disable drivers manually. I can live with disabled drivers just fine(I'm already used to it in quite some time) but the annoying problem is my display resolution. I can not set my res to anything higher than 1024x768. I was wondering if it's possible to change resolution to my native displays resolution without drivers? I've been trying to find something that would work w/o drivers, but with no luck(I've found many of solutions how to do it with working drivers, but as you know I can not enable my drivers). So please, maybe someone could help me and tell me how to set custom resolution?

  Read the article

• RDP Connection to XP from Windows 7 crashes part of XP

  - by flxkid

  I have some XP machines that I RDP into. If I RDP into the machine from something other than a Windows 7 box, and then RDP into the machine with a Windows 7 box, the XP machines crash (not BSOD though). I get an event ID 1003 with these details: Error code 1000008e, parameter1 c0000005, parameter2 bf85b6b7, parameter3 b6149a88, parameter4 00000000. I have this happening on quite a few machines, and I can reliably reproduce it. I've found no way to fix it. If I only connect from Windows 7 machines, it never fails. Any suggestions?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13  | Next Page >