Search Results

Search found 14175 results on 567 pages for 'home entertainment'.

Page 9/567 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Use name instead of IP address for home network

    - by abney317
    I have IIS7 on my computer, and I can access it through other computers in my house on the same network through my computer's IP address - 192.168.1.10x Instead of typing in http : //192.168.1.10x/ I want to be able to go to http : //somename/ I know you can change the hosts file to add it but I'd have to do that on each computer and I'd still have to type in the IP to access it from my iPod/Wii... etc.

    Read the article

  • Use name instead of IP address for home network

    - by abney317
    I have IIS7 on my computer, and I can access it through other computers in my house on the same network through my computer's IP address - 192.168.1.10x Instead of typing in http : //192.168.1.10x/ I want to be able to go to http : //somename/ I know you can change the hosts file to add it but I'd have to do that on each computer and I'd still have to type in the IP to access it from my iPod/Wii... etc.

    Read the article

  • Establish direct cable connection between Windows 8 PCs in home network

    - by Marie. P.
    I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

    Read the article

  • For very beginning startup: home server or EC2?

    - by StCee
    The micro instance of Amazon EC2 only has ram of 613MB, my laptop got 8GB. And I suppose likewise the processing power of my computer would be better than the micro instance. My question is, what are the considerations in deciding to host yourself or on Amazon EC2, especially for a really baby startup? For example, would network speed be a problem? My computer broadband network is 100Mbs up to 1Gbs. What would Amazon compare to this? My site at these moment would just host some images and perform some php requests. I would probably also use cloudflare but seems it increases the dns lookup time considerably... And of course the overall objective is to make the best user experience.

    Read the article

  • Plex won't enter my home directory or other partitions

    - by RobinJ
    I just installed the Plex media server from the Ubuntu Software Center, and opened the web interface. I wanted to start by adding a collection. When it gave me a file browser, I wanted to go to /home/robin/Videos. /home is as far as I got. It showed robin, with an arrow in front of it, but when I tried to expand the directory tree it was empty. The same happened when trying to access /media/Data. For me it's quite useless like this, as all of my media files are inside those 2 directories. Help would be much appreciated. My first guess seemed to be a correct one; It is, as always, a permissions problem. How do I give plex access to my home folder without also giving other users access to it? My home folder is encrypted by the way, so that'll probably complicate things a little. robin@RobinJ:~$ sudo -u plex bash [sudo] password for robin: bash: /home/robin/.bashrc: Permission denied plex@RobinJ:~$ ls -al ls: cannot open directory .: Permission denied plex@RobinJ:~$ cd /home plex@RobinJ:/home$ cd robin bash: cd: robin: Permission denied plex@RobinJ:/home$ ls -al robin ls: cannot open directory robin: Permission denied

    Read the article

  • Performance Overhead of Encrypted /home

    - by SabreWolfy
    I have a netbook with Windows on the second partition and Xubuntu (/ and /home) on the third partition. I selected to encrypt my home folder during installation. The performance of the netbook is adequate for the small machine that it is, but I'm looking to improve performance. I could not find much information about the overhead (CPU or drive) associated with home partition encryption. I ran the following, writing to my home partition as well as the the mounted Windows partition: dd if=/dev/zero of=~/dummy bs=512 count=10240 dd if=/dev/zero of=/media/Windows/dummy bs=512 count=10240 The first returned 2.4MB/s and the second returned 2.5MB/s. Can I therefore deduce that there is very little overhead to home folder encryption? I'm not sure if the different filesystems will make any difference (/ and /home are ext3). Update 1 I don't know why I didn't use /tmp instead of the mounted Windows folder. Only /home is encrypted, so /tmp is unencrypted ext3. The results of the dd as above are astounding: ~: 2.4 MB/s /tmp: 42.6 MB/s Comments please? The reason I am asking this is that disk access on the netbook is noticeably slow. Update 2 I timed each of the dd operations with time: ~: real 0m2.217s user 0m0.028s sys 0m2.176s /tmp: real 0m0.152s user 0m0.012s sys 0m0.136s See also: discussion on UbuntuForums.org and bug report Edit: Output of mount: /dev/sda3 on / type ext3 (rw,noatime,errors=remount-ro,user_xattr,commit=600) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/USER/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=USER) `

    Read the article

  • How do I rescue files from the encrypted home folder via live USB stick?

    - by Alexia
    I know, this has been asked and answered all over the internet already. However, I start feeling stupid, since the informations there are not helping me. Just this morning, I wanted to install the newest update to 13.10. After the download, when it came to the actual installing, the install program froze and didn't do anything for hours. At that time, I was still logged in. The computer was working and everything was accessable to me. However, I made the mistake and didn't immediately make safety copies of everything. Instead, I just rebooted. Long story short: My computer even fails to reset to a previous version via Grub. But I am able to boot from a USB stick and, after starting Nautilus, I see my home folder on the HD. I would now like to copy its contents onto an external harddisk. Problem 1: I have no rights to access the folder like that. Problem 2: It is encrypted. Problem 3: I don't know how to give myself the rights to access the folder nor do I know how to encrypt it. I assume that it might help that I still know these things: - my old login name - my old login phrase - a 32 characters long string of hexadecimal numbers that I copied to my list of passwords as "Ubuntu Encryption Code". I copied it digitally right after installing Ubuntu the first time and encrypting the home folder, so there won't be any typos. I am sure of that. The solutions that I saw so far, tell me that I need the "encryption phrase". But when I follow the instructions and use this phrase that I have in my list, I only get messages of denial. Can anyone help me through this special problem, please?

    Read the article

  • Pressing "Home" in Vim on an Indented Line

    - by Reid
    I have a bad habit of using the 'home' key to go back to the beginning of a line. As I recently started using vim (and loving it!) I noticed that when I press the home key on a lined that is indented, it returns me to the very beginning of the line. In Notepad++ (the editor I used to use) it would return me to the beginning of the code on that line, right after the indent. Is there some way to replicate this behavior in vim? Usually, when I'm pressing home it's in the Insert mode for me to (usually) stick a variable there. I have set smartindent in my vimrc, with set noautoindent as a "tips" page told me to make sure to disable autoindent (although it didn't seem to be enabled in the first place - perhaps that option is extraneous.) Thanks in advance.

    Read the article

  • Teaching "web design/development" to high-school home-school group. Good sources?

    - by anonymous coward
    I may soon begin teaching a "web design and development" class for a home-school co-op group. Any suggestions for "course" material? My first thought was to work through the Opera Web Standards Curriculum, but am interested in hearing about possible alternatives or suggestions that better cover the "very basics" of getting started with designing and developing web pages. Not necessarily looking for topics, so much as existing resources. Thanks so much for your input!

    Read the article

  • Base system driver error - HP Pavilion Entertainment PC dv9323cl

    - by Damurph
    I upgraded to Wndows 7 and have a problem with graphics with my NVIDIA GeoForce Go 7600 not displaying properly. Also the Base System Drivers have yellow flags near them and it states that the The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Any clues??? Please help!

    Read the article

  • How to correctly setup home directories and permissions on a mounted partition.

    - by user36505
    I'm setting up a Fedora 12 server. I have a root (/) partition where the boot (/boot) partition is mounted and then a separate partition (/files) for separating home directories and shares away from the other partitions. The filesystem mounts fine and users can be created to have home directories in /files/home/[user] just fine. However, when I log in as one of those users, I get an error saying "Cannot chdir in to /files/home/[user]: permission denied". If I create a user under the default /home using the same process, everything works fine. The same goes for when I try and browse a share in windows; I can see the shares, but cannot access them. The permissions and owners on /files and /files/home are the same as /home. When the user is created, the user directory owner and permissions are also the same. How can I set the /files partition up so that it can be used as a home directory and for samba sharing rather than using the root (/) partition? Thanks.

    Read the article

  • CloudBerry Online Backup 1.5 for Windows Home Server

    - by The Geek
    Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

    Read the article

  • Why does this mod_rewrite rule 'not-match'? (big rewrite log included)

    - by Christopher
    I've got a scenario involving two domains: WordPress site hosted on domain1.com domain2.co.uk, simply redirecting users to domain1 via mod_rewrite This rule applies irrespective of whether www. is specified or not. (It's eventually removed from the URL, I'm a no-WWW fan.) There's nothing on domain2.co.uk at all except for an .htaccess with some mod_rewrite rules. However, I want to be able to allow users to be redirected to the correct article URI even if they specify the "wrong" URL (i.e., a 301 redirect preserving the stuff after the first forward slash). I'm currently achieving this with this ruleset: RewriteCond %{HTTP_HOST} ^((www\.)?[^\.]+)\.domain2\.co\.uk [NC,OR] RewriteCond %{HTTP_HOST} ^domain2\.co\.uk [NC] RewriteRule ^(.*)$ http://domain1.com/$1 [R=301,L] This works but is uglier than I want it to be. I'm not a mod_rewrite zen master, but from what I can tell the top rule should match irrespective of whether www. is specified... But it doesn't. In order to catch www-less requests, I need the second RewriteCond. From the rewrite log, with just the first RewriteCond: [domain2.co.uk/sid#e200498][rid#e670168/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/ -> [domain2.co.uk/sid#e200498][rid#e670168/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '' [domain2.co.uk/sid#e200498][rid#e670168/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e670168/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/ [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.html [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.htm [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.shtml [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php5 [domain2.co.uk/sid#e200498][rid#e666c98/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php4 [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.php3 [domain2.co.uk/sid#e200498][rid#e653868/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.phtml [domain2.co.uk/sid#e200498][rid#e65f8b8/subreq] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/index.cgi [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/403.shtml -> 403.shtml [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '403.shtml' [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e66c370/initial/redir#1] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/403.shtml [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/favicon.ico -> favicon.ico [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri 'favicon.ico' [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e668ca8/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/favicon.ico [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/404.shtml -> 404.shtml [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '404.shtml' [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)|[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#f160b40/initial/redir#1] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] pass through /home/devnull/domains/domain2.co.uk/public_html/404.shtml However with the second RewriteCond added, the rule works, and the logs show this: [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] strip per-dir prefix: /home/devnull/domains/domain2.co.uk/public_html/ -> [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (3) [perdir /home/devnull/domains/domain2.co.uk/public_html/] applying pattern '^(.*)$' to uri '' [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^((www\.)?[^\.]+)\.domain2\.co\.uk' [NC] => not-matched [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (4) [perdir /home/devnull/domains/domain2.co.uk/public_html/] RewriteCond: input='domain2.co.uk' pattern='^domain2\.co\.uk' [NC] => matched [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (2) [perdir /home/devnull/domains/domain2.co.uk/public_html/] rewrite '' -> 'http://domain1.com/' [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (2) [perdir /home/devnull/domains/domain2.co.uk/public_html/] explicitly forcing redirect with http://domain1.com/ [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] escaping http://domain1.com/ for redirect [domain2.co.uk/sid#e200498][rid#e65fe58/initial] (1) [perdir /home/devnull/domains/domain2.co.uk/public_html/] redirect to http://domain1.com/ [REDIRECT/301] Can anybody help me figure out why it just won't work with the one rule? I feel like I'm missing the bleeding obvious, and while the second RewriteCond is a valid workaround, it's a kludge and that annoys me. ;-) All help appreciated...

    Read the article

  • Permission denied after creating home partition

    - by Magnus
    I have recently created a separate home partition following this tutorial https://help.ubuntu.com/community/Partitioning/Home/Moving. Since I’m still a newbie in the Linux (struggling to learn) I felt happy when every thing seemed to work smooth. How ever, I realised after a while that I had lost all permission to my subfolders in the my home folder. I still can read/write the files placed directly in /home/magnus but I'm denied access to any of the subfolders. I just realised one more disturbing thing, probably related to home-partition story above: When I try cd ~/Music/ I get the message bash: cd: /home/magnus/Music/: Permission denied When I try: sudo cd ~/Music/ I get the result sudo: cd: command not found Seems strange that the cd command have been lost? What have I done wrong and is there a way to fix this? btw: I use Ubuntu 12.04 LTS Thanks for all the help! Magnus

    Read the article

  • HomeMade/DIY NAS solution

    - by MicTech
    Has anyone experience with building NAS (Network-attached storage) for home/small office using? What component would you recommend? Hardware CPU motherboard HDDs RAID controller etc. Software OS FTP HTTP etc.

    Read the article

  • Downgrade to LTS version, preserving /home partition: Should I expect this to work?

    - by Archelon
    Specifically, I'm installing Kubuntu 12.04 over 13.04. And in fact I've already done it, and it seems to have at least mostly worked, but I'm wondering whether this one anomaly is likely to be attributable to the downgrade; to wit: I have no window borders|decorations, but only wide, featureless, white---or sometimes black---margins around all my windows. None of the settings in System Settings (the window border and decorations options are in Workspace Appearance) seem to have any effect. Is this likely to be fixable, or should I cut my losses and reinstall (formatting the /home partition and restoring any data with rsync)?

    Read the article

  • overriding the Home Key Long press in a category.HOME activity.

    - by Profete162
    Hello all, I just created my own "Home" to replace the stock android one or Sense. All is working fine and I get all I want. My only problem is to replace to long press on home key ( that usually show the last 6 activities you launched) by my own launcher. I successfully replace the long press on MENU button with this code: @Override public boolean onKeyDown(int keyCode, KeyEvent event) { //Log.i(TAG,"Keycode: "+keyCode); if (keyCode == KeyEvent.KEYCODE_MENU) { // this tells the framework to start tracking for // a long press and eventual key up. it will only // do so if this is the first down (not a repeat). event.startTracking(); return true; } (...) and this part part for the long press: @Override public boolean onKeyLongPress(int keyCode, KeyEvent event) { //Log.i(TAG,"LONG"+keyCode); Toast.makeText(Launcher.this,"LONG "+keyCode, Toast.LENGTH_SHORT).show(); if (keyCode == KeyEvent.KEYCODE_MENU) { (...) But the problem is that I wasn't able to replace the KeyEvent.KEYCODE_MENU with KeyEvent.KEYCODE_HOME is that something locked in the code that avoid user to use a Home long press? Thank a lot for all the information you woulg give me.

    Read the article

  • Disable home button in android toddler app?

    - by cmerrell
    I've developed and app that is a slide show of pictures which each play a sound when you tap them. It's like a picture book for ages 2-4. The problem is, since android won't let you capture a home button press and essentially disable it, when parents give the phone to their child to play with unattended (brave parent), the child can inadvertenly exit the app and then make calls or otherwise tweak the phone. There are two other apps that currently have a psuedo fix for this issue. The apps are Toddler Lock and ToddlePhone. I've tried contacting the developers of these apps for some guidance but they haven't been willing to disclose anything, which if fine, but does anyone here have any suggestions? It looks like both of those other apps are acting like a home screen replacement app. When you enable the "childproof mode" on those apps the user is prompted to chose and app for the action and the choices are "Launcher, LauncherPro, etc." plus the toddler app. You then have to make the toddler app the default and voila, the phone is "locked" and can only be "unlocked" using a key combination or touching the four corners of the screen, etc. when you "unlock" the phone. your normal home screen app default restored. You don't even have to make the toddler app the default the next time you enable the "childproof mode". I have read that these two apps have problems with Samsung phones and they can cause an an infinite crash-and-restart-loop that requires a factory reset to fix. Obviously this is not the ideal solution to the problem but it looks like the only one availiable at this point. Does anyone have any ideas on how to implement a "childproof mode"?

    Read the article

  • Determining the required depth and specifications for a server cabinet

    - by Bingu Bingme
    I'm trying to understand the considerations ("why") that go into determining the specifications ("what") for a rackmount server cabinet, in order to determine what sort of rack I should purchase for my home use. Since this is for home use, I won't be following certain best practices (eg. hot/cold aisle, not even air conditioning) and may be willing to sacrifice in various areas in order to reduce cost and footprint - but please advise if there are safety concerns or other considerations to note. The most basic specs for a server cabinet are the dimensions (external width x external depth x usable height). Width: commonly 600mm or 800mm (if the use case requires extra clearance around the sides, such as if there is lots of cabling). In my case and most common cases, I'm going to stick with 600mm. Height: Select a sufficiently tall rack to fit my equipment. But how much may I stuff into it? Eg, if there is a 15U rack, can I really populate it with 15U of servers, or should I leave 1U at top and bottom for air circulation? Depth: Racks commonly have external depth of 600mm (network equipment), 800mm, 1000mm, or even longer. I'm trying to see how to fit into the 800mm depth. With reference to http://www.server-racks.com/rack-mount-depth.html, I'm hoping to have the front and rear posts mounted ~ 28.5" (72cm) apart, which would leave only 8cm for front space and rear space. How much rear space (from rear posts to back of rack) do I really need? I won't use cable management arms, so can I mount a 72cm depth server since the power, KVM, network cables won't take up much depth? My most important equipment are all < 60cm depth (4U chassis) and should comfortably fit within the 800mm cabinet. The rest of the equipment are very old 1U servers that range from 65-72cm depth. I might still want to make further use of them, or I might discard them since they are so old. Even if the 72cm servers cannot be powered on in an 800mm rack, I should be able to use them as 1U shelves. But, what server depth can I expect to be able to operate? Or am I forced to upgrade to 1000mm depth racks in order to use any servers deeper than 60cm? With reference to best practices for HP racks, some other specs and installation considerations: There aren't any minimum recommendations for clearance on the sides of the rack. It is recommended to leave 48" front clearance. The 48" front clearance is based on 32" chassis depth, 13" to extend the rack rails and mate the inner/outer rails, and 3" for movement. If I don't use such rails (eg, use shelves instead), it should be sufficient to leave front clearance of chassis depth + 3". It is recommended to leave 30" rear clearance "to provide space for servicing the rack". I'm planning to back the rack into a corner of the room, and wheel it slightly out when I need to access the rear. If the wheeling plan is ok, I still need to know how much rear clearance is required for air circulation and ventilation purposes. Castor wheels and stabilising feet. Since I'm backing the rack into a corner of the room, I'll only be able to set the stabilising feet on the front corners. Thoughts on safety? The rack that I'm considering has front glass doors with side ventilation slits and fully perforated rear doors. I'm hoping this will be a good balance between temperature and noise (only ventilation slits facing out the front, while the rear is facing the walls). Or is the sound of high-rpm fans going to escape through the front slits anyway and destroy my sanity?

    Read the article

  • How to Upgrade Your Netbook to Windows 7 Home Premium

    - by Matthew Guay
    Would you like more features and flash in Windows on your netbook?  Here’s how you can easily upgrade your netbook to Windows 7 Home Premium the easy way. Most new netbooks today ship with Windows 7 Starter, which is the cheapest edition of Windows 7.  It is fine for many computing tasks, and will run all your favorite programs great, but it lacks many customization, multimedia, and business features found in higher editions.  Here we’ll show you how you can quickly upgrade your netbook to more full-featured edition of Windows 7 using Windows Anytime Upgrade.  Also, if you want to upgrade your laptop or desktop to another edition of Windows 7, say Professional, you can follow these same steps to upgrade it, too. Please note: This is only for computers already running Windows 7.  If your netbook is running XP or Vista, you will have to run a traditional upgrade to install Windows 7. Upgrade Advisor First, let’s make sure your netbook can support the extra features, such as Aero Glass, in Windows 7 Home Premium.  Most modern netbooks that ship with Windows 7 Starter can run the advanced features in Windows 7 Home Premium, but let’s check just in case.  Download the Windows 7 Upgrade Advisor (link below), and install as normal. Once it’s installed, run it and click Start Check.   Make sure you’re connected to the internet before you run the check, or otherwise you may see this error message.  If you see it, click Ok and then connect to the internet and start the check again. It will now scan all of your programs and hardware to make sure they’re compatible with Windows 7.  Since you’re already running Windows 7 Starter, it will also tell you if your computer will support the features in other editions of Windows 7. After a few moments, the Upgrade Advisor will show you want it found.  Here we see that our netbook, a Samsung N150, can be upgraded to Windows 7 Home Premium, Professional, or Ultimate. We also see that we had one issue, but this was because a driver we had installed was not recognized.  Click “See all system requirements” to see what your netbook can do with the new edition. This shows you which of the requirements, including support for Windows Aero, your netbook meets.  Here our netbook supports Aero, so we’re ready to go upgrade. For more, check out our article on how to make sure your computer can run Windows 7 with Upgrade Advisor. Upgrade with Anytime Upgrade Now, we’re ready to upgrade our netbook to Windows 7 Home Premium.  Enter “Anytime Upgrade” in the Start menu search,and select Windows Anytime Upgrade. Windows Anytime Upgrade lets you upgrade using product key you already have or one you purchase during the upgrade process.  And, it installs without any downloads or Windows disks, so it works great even for netbooks without DVD drives. Anytime Upgrades are cheaper than a standard upgrade, and for a limited time, select retailers in the US are offering Anytime Upgrades to Windows 7 Home Premium for only $49.99 if purchased with a new netbook.  If you already have a netbook running Windows 7 Starter, you can either purchase an Anytime Upgrade package at a retail store or purchase a key online during the upgrade process for $79.95.  Or, if you have a standard Windows 7 product key (full or upgrade), you can use it in Anytime upgrade.  This is especially nice if you can purchase Windows 7 cheaper through your school, university, or office. Purchase an upgrade online To purchase an upgrade online, click “Go online to choose the edition of Windows 7 that’s best for you”.   Here you can see a comparison of the features of each edition of Windows 7.  Note that you can upgrade to either Home Premium, Professional, or Ultimate.  We chose home Premium because it has most of the features that home users want, including Media Center and Aero Glass effects.  Also note that the price of each upgrade is cheaper than the respective upgrade from Windows XP or Vista.  Click buy under the edition you want.   Enter your billing information, then your payment information.  Once you confirm your purchase, you will directly be taken to the Upgrade screen.  Make sure to save your receipt, as you will need the product key if you ever need to reinstall Windows on your computer. Upgrade with an existing product key If you purchased an Anytime Upgrade kit from a retailer, or already have a Full or Upgrade key for another edition of Windows 7, choose “Enter an upgrade key”. Enter your product key, and click Next.  If you purchased an Anytime Upgrade kit, the product key will be located on the inside of the case on a yellow sticker. The key will be verified as a valid key, and Anytime Upgrade will automatically choose the correct edition of Windows 7 based on your product key.  Click Next when this is finished. Continuing the Upgrade process Whether you entered a key or purchased a key online, the process is the same from here on.  Click “I accept” to accept the license agreement. Now, you’re ready to install your upgrade.  Make sure to save all open files and close any programs, and then click Upgrade. The upgrade only takes about 10 minutes in our experience but your mileage may vary.  Any available Microsoft updates, including ones for Office, Security Essentials, and other products, will be installed before the upgrade takes place. After a couple minutes, your computer will automatically reboot and finish the installation.  It will then reboot once more, and your computer will be ready to use!  Welcome to your new edition of Windows 7! Here’s a before and after shot of our desktop.  When you do an Anytime Upgrade, all of your programs, files, and settings will be just as they were before you upgraded.  The only change we noticed was that our pinned taskbar icons were slightly rearranged to the default order of Internet Explorer, Explorer, and Media Player.  Here’s a shot of our desktop before the upgrade.  Notice that all of our pinned programs and desktop icons are still there, as well as our taskbar customization (we are using small icons on the taskbar instead of the default large icons). Before, with the Windows 7 Starter background and the Aero Basic theme: And after, with Aero Glass and the more colorful default Windows 7 background.   All of the features of Windows 7 Home Premium are now ready to use.  The Aero theme was activate by default, but you can now customize your netbook theme, background, and more with the Personalization pane.  To open it, right-click on your desktop and select Personalize. You can also now use Windows Media Center, and can play-back DVD movies using an external drive. One of our favorite tools, the Snipping Tool, is also now available for easy screenshots and clips. Activating you new edition of Windows 7 You will still need to activate your new edition of Windows 7.  To do this right away, open the start menu, right-click on Computer, and select Properties.   Scroll to the bottom, and click “Activate Windows Now”. Make sure you’re connected to the internet, and then select “Activate Windows online now”. Activation may take a few minutes, depending on your internet connection speed. When it is done, the Activation wizard will let you know that Windows is activated and genuine.  Your upgrade is all finished! Conclusion Windows Anytime Upgrade makes it easy, and somewhat cheaper, to upgrade to another edition of Windows 7.  It’s useful for desktop and laptop owners who want to upgrade to Professional or Ultimate, but many more netbook owners will want to upgrade from Starter to Home Premium or another edition.  Links Download the Windows 7 Upgrade Advisor Windows Team Blog: Anytime Upgrade Special with new PC purchase Similar Articles Productive Geek Tips How To Upgrade from Vista to Windows 7 Home Premium EditionAnother Blog You Should Subscribe ToMysticgeek Blog: Turn Vista Home Premium Into Ultimate (Part 3) – Shadow CopyUpgrade Ubuntu from Breezy to DapperHow to Upgrade the Windows 7 RC to RTM (Final Release) TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Get Your Delicious Bookmarks In Firefox’s Awesome Bar Manage Photos Across Different Social Sites With Dropico Test Drive Windows 7 Online Download Wallpapers From National Geographic Site Spyware Blaster v4.3 Yes, it’s Patch Tuesday

    Read the article

  • Recommended storage scheme for home server? (LVM/JBOD/RAID 5...)

    - by j-g-faustus
    Are there any guidelines for which storage scheme(s) makes most sense for a multiple-disk home server? I am assuming a separate boot/OS disk (so bootability is not a concern, this is for data storage only) and 4-6 storage disks of 1-2 TB each, for a total storage capacity in the range 4-12 TB. The file system is ext4, I expect there will be only one big partition spanning all disks. As far as I can tell, the alternatives are individual disks pros: works with any combination of disk sizes; losing a disk loses only the data on that disk; no need for volume management. cons: data management is clumsy when logical units (like a "movies" folder) are larger than the capacity of any single drive. JBOD span pros: can merge disks of any size. cons: losing a disk loses all data on all disks LVM pros: can merge disks of any size; relatively simple to add and remove disks. cons: losing a disk loses all data on all disks RAID 0 pros: speed cons: losing one drive loses all data; disks must be same size RAID 5 pros: data survives losing one disk cons: gives up one disk worth of capacity; disks must be same size RAID 6 pros: data survives losing two disks cons: gives up two disks worth of capacity; disks must be same size I'm primarily considering either LVM or JBOD span simply because it will let me reuse older, smaller-capacity disks when I upgrade the system. The runner-up is RAID 0 for speed. I'm planning on having full backups to a separate system, so I expect the extra redundancy from RAID levels 5 or 6 won't be important. Is this a fair representation of the alternatives? Are there other considerations or alternatives I have missed? And what would you recommend?

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >