Search Results

Search found 359 results on 15 pages for 'mad sammy'.

Page 9/15 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Alice In Wonderland: Good, but not Great

    - by Theo Moore
    We went to see Alice In Wonderland today. We both like Tim Burton a lot (the stranger the better) and like Johnny Depp very well also. After seeing all the previews and such, we were fired up to see this film. Honestly, I thought it was good but not great. I was prepared to be wow-ed, but I wasn't. Perhaps I expected too much. I did like it, but I'll not own it nor would I expect to see it again...unless someone I know decides they want to see it. I was about to say something to reassure you that I wasn't going to provide any spoilers but two things occurred to me: one, I never give spoilers and two, why worry about spoilers for a film that so closely follows a book? My comments about the film are hard to describe, but the basic gist is that it doesn't really feel like it..."works" to me. I can't get any more specific than that, much as I'd like to do so. Something about it seems sort of disjointed and not in that Alice way you'd expect. My only specific comment is that I didn't like the actor who plays Alice very well. She was very flat and just didn't sell he character to me. She seemed a bit, well, plastic. Depp was as good as you'd expect him to be, I am happy to say. Obviously Lewis Carroll couldn't have imagined this made into film, but I can't help thinking that he'd see this and say that Depp was the perfect Mad Hatter. So, I'd definitely recommend seeing it (we saw it in 3D which was cool, but not really necessary) at least once, but don't be surprised if you're kinda meh afterwards.

    Read the article

  • Friday Fun: Vehicles

    - by Mysticgeek
    Friday has finally arrived and it’s time to ignore spreadsheets and TPS reports and waste time playing a flash game. Today we take a look at the fun puzzle game called Vehicles. Vehicles This is a fun game with cartoon style graphics where you navigate vehicles to solve different puzzles. You navigate the vehicles through different puzzle situations by clicking on them with your mouse. You’re given basic instructions on how to complete each level. You’ll need to strategically place the vehicles so you can knock the black vehicles off the screen. As you progress up the levels, they become more challenging and if you need to, you can restart it at any time. Since it’s Friday, and you’re sick of your job, Vehicles is a fun puzzle game to keep your mind of the boringness of work until it’s time for weekend freedom. Play Vehicles at FreeWebArcade Similar Articles Productive Geek Tips Friday Fun: Relieve Workweek Frustration Playing Mad MondayFriday Fun: Uphill RushFriday Fun: Battlefield HeroesFriday Fun: Portal, the Flash VersionFriday Fun: Play 3D Rally Racing in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED

    Read the article

  • Ubuntu Server 13.10 can't mount hard drive that is on my router

    - by Keytachi626
    So I am working currently with my Ubuntu server which I have it on my laptop at the moment so I can test out how to work with the server OS. I have it up and running with samba, openSSH, webmin, and plexmedia server. My problem is that I can't seem to get the server to get to the router hard drive. I have a TP-link wdr3500. The format of the hard drive is a FAT32. What I've tried: install cifs. sudo vi /etc/fstab Type out \\ \tplinklogin.net\volume1 \mnt\media cifs guest 0 0 I have also tried out \\\192.168.0.1\volume1 \mnt\media cifs guest 0 0 But then when I go to terminal and do sudo mount -a, I usually get a error saying wrong fs type, bad option, bad superblock on //ipaddress/dns/volume1 , missing codepage or helper program, or other error. But in dmesg it will say unable to determine destination address. So am I doing something wrong here? I can't install the hard drive on to my laptop since my family is constantly using it to transfer data back and forth on it and they get mad at me if I just take it away.

    Read the article

  • Need to sanity-check my .htaccess, especially Limit GET POST line for Google repellent

    - by jose
    I need a sanity check on this .htaccess (from a WordPress site) I inherited from a 5 month+ old site. What's the symptom? Google + Bing crawl, but don't index any of the pages. Let me be clear: I'm not mad about "not ranking high." I think something is (accidentally) rejecting search engine indexing. I am not an expert on .htaccess, but one part especially looked funny, the Limit GET POST line. Is it not weird to have both Allow and Deny all, with no parameters? Also, I've ruled out robots.txt, but if I were you I'd want to see it, so here it is: User-agent: * Crawl-delay: 30 And here's the more suspect .htaccess: # temp redirect wordpress content feeds to feedburner <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{HTTP_USER_AGENT} !FeedBurner [NC] RewriteCond %{HTTP_USER_AGENT} !FeedValidator [NC] RewriteRule ^feed/?([_0-9a-z-]+)?/?$ http://feeds.feedburner.com/anonymousblog [R=302,NC,L] </IfModule> # temp redirect wordpress comment feeds to feedburner <IfModule mod_rewrite.c> RewriteEngine on RewriteCond %{HTTP_USER_AGENT} !FeedBurner [NC] RewriteCond %{HTTP_USER_AGENT} !FeedValidator [NC] RewriteRule ^comments/feed/?([_0-9a-z-]+)?/?$ http://feeds.feedburner.com/anonymous_comments [R=302,NC,L] </IfModule> <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> IndexIgnore .htaccess */.??* *~ *# */HEADER* */README* */_vti* <Limit GET POST> order deny,allow deny from all allow from all </Limit> <Limit PUT DELETE> order deny,allow deny from all </Limit> php_value memory_limit 32M Adding header by request: <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <meta name="robots" content="noindex,nofollow" /> <meta name="description" content="buncha junk i've deleted." /> <meta name="keywords" content="keywords i've deleted" /> <meta name="viewport" content="width=device-width" />

    Read the article

  • A lot has happened since last post!!!!!!!!!

    - by Ratman21
    And I mean a lot! First off had two interviews (one was selling insurance) and other installing cable. I have more hope for the cable one. Getting more emails from my job search engines (having problems with going through them and applying for those jobs, I know I can do). It seems the more I apply to, the more job emails pop up in my in box. But at the same time I am fighting feelings of worthlessness (18 months and no job). It is putting a strain on my marriage (We had had blow out over a broken drinking glass since I last posted).     But, at the same time, I am fighting mad about (a figure of speech, really) not having a job. Look just because I am over 55 and have gray hair. It does not mean, my brain is dead or I can not longer trouble shoot a router or circuit or LAN issue. Or that I can do “IT” work at all. And I could prove this if; some one would give me at job. Come on try me for 90 days at min. wage.   I know you will end up keeping me (hope fully at normal pay) around. Is any one hearing me…come on take up the challenge!

    Read the article

  • jerky walljump in unity rigidbody2d

    - by Lilz Votca Love
    hey there i know people have encountered issues with it before i looked upon the different solutions provided but i couldnt get any fix at all.im making a 2d game and am stuck with the walljump.i detect the wall wonderfully i also detect the jump and it works the player jumps off the wall when facing right with the use of rigidbody.addforce(new vector2(-1,2)*jumpforce) now when jumping on the oposite wall using the same vector with the sign in x axis changed to 1,the player jumps too but it goes more in the y axis than it should.Here is an image to show you the curves it(the player) follows. check the following url to see the behaviour https://scontent-b-mad.xx.fbcdn.net/hphotos-xpf1/t1.0-9/1470386_10152415957141154_156025539179003805_n.jpg voila the green one is happennig when player faces right and the other one happens when he is not here is the section of code if (wall) { if (wallJump) { if (facingRight) { rigidbody2D.velocity = Vector2.zero; flip (); rigidbody2D.AddForce (new Vector2 (-1f, 2f) * Jumpforce / 1.5f); Debug.Log ("saut mural gauche" + new Vector2 (-1f, 2f) * Jumpforce / 1.5f); } else { rigidbody2D.velocity = Vector2.zero; flip (); rigidbody2D.AddForce (new Vector2 (1f, 2f) * Jumpforce / 1.5f); Debug.Log ("saut mural droit--" + new Vector2 (Mathf.Sign (1f), 2f) * Jumpforce / 1.5f + "jump" + jump); } } } else { wallJump = false; } here the code is not optimized yet but i assure you it works so guys any help would be so awesome!! thanks

    Read the article

  • UPDATE FOR BI PUBLISHER ENTERPRISE 10.1.3.4.2 NOVEMBER 2011

    - by Tim Dexter
    It's Friday, that means its patch release time. Why do we do this to ourselves, 'we'll release on Friday!' It might 11.59 on Friday but by golly we'll have released on Friday. I can remember a release of BIP years ago that for some reason we went for 12/31 as a release date ... were we mad? I seem to remember we made it but talk about ridiculous pressure! The latest 10g rollup is out in the wild and available from Oracle support. A bug fixing rollup but worth getting to and know that support will want you to get to it and re-test before going forward on an SR. One simple but very useful fix or enhancement:[Cause of the bug] @ ================== @ Customer reports that despite the clock being shown, end users are clicking @ on the View button repeatedly as the initial generation is taking some time.   @ If the button were to be grayed out then  this would prevent the users @ requesting the report more than  once.  Repeated requests are causing a @ system overload and as this is their Production  instance this is extremely @ important to the customer. @ . @ [The Fix] @ ========= @ Added the logic to disable the button after the user clicks on the "view" @ button and re-enable it when the report is loaded. I told a group of customers once that they have a headache and we have a non-steroidal anti-inflammatory drug, alright, I actually said 'aspirin'. This little gem of a fix helps relieve another little headache that our aspirin was causing. The patch number for all this BIP pain killing is 13399232, enjoy!

    Read the article

  • SRV from UAV on the same texture in directx

    - by notabene
    I'm programming gpgpu raymarching (volumetric raytracing) in directx11. I succesfully perform compute shader and save raymarched volume data to texture. Then i want to use same texture as SRV in normal graphic pipeline. But it doesnt work, texture is not visible. Texture is ok, when i save it file it is what i expect. Texture rendering is ok too, when i render another SRV, it is ok. So problem is only in UAV-SRV. I also triple checked if pointers are ok. Please help, i'm getting mad about this. Here is some code: //before dispatch D3D11_TEXTURE2D_DESC textureDesc; ZeroMemory( &textureDesc, sizeof( textureDesc ) ); textureDesc.Width = xr; textureDesc.Height = yr; textureDesc.MipLevels = 1; textureDesc.ArraySize = 1; textureDesc.SampleDesc.Count = 1; textureDesc.SampleDesc.Quality = 0; textureDesc.Usage = D3D11_USAGE_DEFAULT; textureDesc.BindFlags = D3D11_BIND_UNORDERED_ACCESS | D3D11_BIND_SHADER_RESOURCE ; textureDesc.Format = DXGI_FORMAT_R32G32B32A32_FLOAT; D3D->CreateTexture2D( &textureDesc, NULL, &pTexture ); D3D11_UNORDERED_ACCESS_VIEW_DESC viewDescUAV; ZeroMemory( &viewDescUAV, sizeof( viewDescUAV ) ); viewDescUAV.Format = DXGI_FORMAT_R32G32B32A32_FLOAT; viewDescUAV.ViewDimension = D3D11_UAV_DIMENSION_TEXTURE2D; viewDescUAV.Texture2D.MipSlice = 0; D3DD->CreateUnorderedAccessView( pTexture, &viewDescUAV, &pTextureUAV ); //the getSRV function after dispatch. D3D11_SHADER_RESOURCE_VIEW_DESC srvDesc ; ZeroMemory( &srvDesc, sizeof( srvDesc ) ); srvDesc.Format = DXGI_FORMAT_R32G32B32A32_FLOAT; srvDesc.ViewDimension = D3D11_SRV_DIMENSION_TEXTURE2D; srvDesc.Texture2D.MipLevels = 1; D3DD->CreateShaderResourceView( pTexture, &srvDesc, &pTextureSRV);

    Read the article

  • Using Mercurial repository inside a Git one: Feasible? Sane?

    - by Portablejim
    I am thinking on creating a Mercurial repository under a Git repository. e.g. ..../git-repository/directory/hg-repo/ The 2 repositories Is it possible to manage (keeping your sanity)? How similiar is it to this? I am a computer science student at University. I manage my work in Git, mainly as a distribution mechanism (after realizing that rsync fails when you have changes in more than one place) between my desktop and usb drive. I try use of Git as a VCS as I do work. I have finished a semester where I did a small group project to prepare for a larger group project next year. We had to use Subversion, and experienced the joys of a centralised VCS (including downtime). I tried to keep the subversion repository separate to my Git repository for the subject**, however it was annoying that it was seperate (not in the place where I store assignments). I therefore moved to using an Subversion repository inside my Git repository. As I think ahead (maybe I am thinking too far ahead) I realise that I will have to try and convince people to use a DVCS and Mercurial will probably be the one that is preferred (Windows and Mac GUI support, closer to Subversion). Having done some research into the whole Git vs Mercurial debate (however not used Mercurial at all) I still prefer Git. Can I have a Mercurial repository inside a Git one without going mad (or it ruining something)? Or is it something that I should not consider at all? (Or is it a bad question that should be deleted?) ** I think outside of Australia it is called a course

    Read the article

  • What should I do when my team leader is unfair for no reason? [closed]

    - by crucified soul
    I'm a new software developer and this is my first job. It's a startup and the CEO and the working environment is just great. I work really hard and I believe that I also do my job well. But recently, I have felt like my team leader is being unfair to me for no reason. It appears that he is nice to my co-workers, but not me. I figure he is mad at me, but I didn't bother to find out why. I really love this company and I really love working there. But if my team leader continues to be unfair then I have no option other than leaving. How can I fix this? EDIT: The other day he called me into his office and wanted to see my work in the afternoon (Yes, in my country, at summer season after 5PM is afternoon. My office begins at 8AM. And I'm not saying I've problems to work after 5PM). At the time I was facing a weird runtime error and I was pretty tired. I explained the situation to him. Then he found a small logical error in my code and asked me why I didn't fix this. I told him I was trying to resolve this runtime error and that I was sure that this logical error had nothing to do with the runtime error. He then proceeded to yell at me. After fixing the logical error that runtime error was still there. This is not the only occasion he has been unfair to me. I'm saying is being unfair because he doesn't do this kind of thing to other developers when they do really silly mistakes.

    Read the article

  • How do I apply 2 rotations about different points to a single primitive using OpenGL

    - by Fenoec
    I'm working on a 2D top-down shooter game that has a rotation feature like Realm Of The Mad God such that if you press e the camera rotates around the character in a clockwise direction and q rotates the camera around the character in a counterclockwise direction. I have this working with my floors and walls by translating to the character, doing the screen rotation, and drawing everything with the character as the origin. The problem arises when I shoot projectiles which need to both rotate around the character and rotate around themselves (shooting uses the mouse cursor so I can shoot at any angle). For example, if the screen is not rotated and I'm shooting rectangular projectiles, I want them to face in the direction I'm shooting (rotation around themselves). However if I only do this rotation, when I then rotate the screen the projectiles will always shoot at the same position because my cursor position does not change. Therefore I need to also either rotate the projectiles around the character or rotate the mouse cursor position to get the correct position (which would then totally screw up all of the collision detection). Likewise if I only do the screen rotation on projectiles, the rectangles will always be facing the same way and they would only look correct if I were shooting straight up or straight down. So my question is, how can I perform 2 rotations on a primitive around 2 different points? The only way I can think of is to translate to the character and do the screen rotation, then somehow calculate the translation required to move back to the middle of the projectile (seeing as how my axes are now rotated) and do its rotation. Or am I thinking about this in the wrong way and there is a different solution to accomplishing this effect?

    Read the article

  • Dedicated Servers: Is one better then two for LAMP pseudo HA setup? [closed]

    - by bikedorkseattle
    Possible Duplicate: How to find web hosting that meets my requirements? I know there are zillions of commentary about hosting out there, but I haven't read much about this. Our current well known host is having too many problems, the hardware we are on it subpar, and I'm ready to leave. A day of downtime can cost as much as our monthly hosting bill. A month of bad performance is just killing us right now, user and google wise. I'm wondering about running two dedicated boxes for LAMP, one running as the primary Nginx/Apache (proxy pass), and the other as the MySQL box. Running a single box scares the bejesus out of me because who knows how long it will take anyone to fix a raid card or whatever. The idea is to set this up using some sort of failover system using pacemaker and heartbeat. If one server goes down the other can take over for the other running both web and db. There are some good articles over at Linode about this. I have a few DBs that are 1GB+ and would like to load them into memory. Because of this, I'm shying away from a Linode HA setup because for the price I could do it with two dedicated like I described. Am I mad or an idiot? What are people out there doing for pseodu high availability good performance setups under $400/month? I'm a webmaster; I do a lot of things none of it that well :)

    Read the article

  • Ideas to tackle unwanted bad press/review on Google's SERP?

    - by Rob
    After Googling our company name to our horror we've found someone on Yelp.co.uk has reviewed our company. On the SERP your eye is immediately drawn to the 2 star review some complete stranger has written, which to be honest is pure slander! The most infuriating thing is the person who reviewed our company has never even been a client/customer. It's a bit like me reviewing a restaurant having never eaten or even been in there! We've sent her a private message on Yelp to remove the review and also sent a complaint to Yelp themselves but have yet to get a reply. We've resisted going mad at the reviewer and also requested that she re-review us having just relaunched our new website (it still riles us that she's not even a client though!). We've had genuine customers/clients review us on Yelp yet this 2 star review remains on Google's SERP. Roughly how long would it take to for our new reviews to over take this review? Does anyone have any suggestions as to how we can push the review off the 1st page of Google's SERP or any creative ways in which we can tackle this issue?

    Read the article

  • Book Giveaway: We Have 10 Free Copies of the 4-Hour Chef (The Simple Path to Cooking Like a Pro, Learning Anything, and Living the Good Life)

    - by The Geek
    The 4-Hour Chef isn’t just a cookbook. It’s a choose-your-own-adventure guide to the world of rapid learning from the best-selling author of the 4-Hour Workweek, and we’ve got 10 free copies for How-To Geek readers. Want more information? Here’s the description of the book, from the Amazon page. The 4-Hour Chef is a five-stop journey through the art and science of learning: 1. META-LEARNING. Before you learn to cook, you must learn to learn. META charts the path to doubling your learning potential. 2. THE DOMESTIC. DOM is where you learn the building blocks of cooking. These are the ABCs (techniques) that can take you from Dr, Seuss to Shakespeare. 3. THE WILD. Becoming a master student requires self-sufficiency in all things. WILD teaches you to hunt, forage, and survive. 4. THE SCIENTIST. SCI is the mad scientist and modernist painter wrapped into one. This is where you rediscover whimsy and wonder. 5. THE PROFESSIONAL. Swaraj, a term usually associated with Mahatma Gandhi, can be translated as “self-rule.” In PRO, we’ll look at how the best in the world become the best in the world, and how you can chart your own path far beyond this book. Still not sold? There’s more information and pictures over on the Amazon page for the book. The 4-Hour Chef: The Simple Path to Cooking Like a Pro, Learning Anything, and Living the Good Life Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary

    Read the article

  • Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

    - by Joe
    After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

    Read the article

  • cannot eliminate space between 2 horizontal divs inside containing div

    - by wantTheBest
    Should be easy, right? Just set the outer containing div's padding to zero, and set the two side-by-side divs inside the outer div to have margin:0 but that's having no effect on the space between the 2 horizontal divs. What I need is the red-outlined left div to touch the green-outlined right-side div. Despite my effort using padding and margin, the space between the 2 divs will not go away. I have looked at many answers on SO but so far no one's broken it down to this simple example -- my fiddle shows this issue, at http://jsfiddle.net/Shomer/tLZrm/7/ And here is the very simple code: <div style="border: 4px solid blue; white-space:nowrap; margin:0; padding:0; width:80%"> <div style="display:inline-block; width:45%; overflow:hidden; margin:0; border: 1px solid red"> Flimmy-flammy </div> <div style="display:inline-block; width:50%; overflow:hidden; margin:0px; border: 1px solid green"> Hambone-Sammy </div> </div>

    Read the article

  • WPF Toolkit DataGrid SelectionChanged Getting Cell Value

    - by Dan Bater
    Hi, Please help me, Im trying to get the value of Cell[0] from the selected row in a SelectionChangedEvent. I am only managing to get lots of different Microsoft.Windows.Controls and am hoping im missing something daft. Hoping I can get some help from here... private void datagrid_SelectionChanged(object sender, SelectionChangedEventArgs e) { Microsoft.Windows.Controls.DataGrid _DataGrid = sender as Microsoft.Windows.Controls.DataGrid; } I was hoping it would be something like... _DataGrid.SelectedCells[0].Value; However .Value isn't an option.... Many many thanks this has been driving me mad! Dan

    Read the article

  • WPF DataGrid RowDataBound?

    - by SiN
    Ok this is driving me mad, I feel like a total Newbie. I'm using WPF's DataGrid control from Dynamic Data Display with .NET 3.5. Link on Codeplex here I want an equivalent to the classic GridView's RowDataBound event, and I can't find any. I tried working with LoadingRow, but it fires every time I scroll. I'm trying to change the background color of certain cells in my grid based on a database values. I'm new to WPF. Should I be using the XAML binding?

    Read the article

  • The Difference between Sharepoint Document Title and Document Name

    I am sorry to ask you guys such a low-level question, but I really can not find out the answer. Hope some mad dogs will not bark for my question. A colleague of mine developed a workflow which auto set title to document. With this workflow,as he put it, he can optimize the research and lookup things like that. However I think it can be done just by name of document. There are must be some kind of story behind this. Could someone help me here? Thanks!

    Read the article

  • C++ / error LNK2019 - XpokerEval library

    - by user1068115
    I have been struggling all the afternoon with the XPokerEval Library I downloaded here: http://www.codingthewheel.com/archives/poker-hand-evaluator-roundup#xpokereval I am trying to make the XPokerEval.PokerSim work, using Visual C++ 2010 express but i get the following errors: 1>psim_test.obj : error LNK2019: unresolved external symbol "void __cdecl SimulateHand(char const *,struct SimResults *,float,float,unsigned int)" (?SimulateHand@@YAXPBDPAUSimResults@@MMI@Z) referenced in function _wmain 1>psim_test.obj : error LNK2019: unresolved external symbol "unsigned int __cdecl RankHand(int const *)" (?RankHand@@YAIPBH@Z) referenced in function _wmain Do you think this can be due to a missing link to a library or a incompatibility with my IDE? The script uses the Pokersource Poker-Eval library which is also included in the zip file, I added to the project directories but it still does not work! I cannot figure out why and I am getting mad! Thanks in advance for any tips on this!

    Read the article

  • Eclipse thinks there are problems with my Android project...

    - by Dan Watling
    I have an Android project and Eclipse is telling me my project has an error with its build path. Specifically, the problem view shows "The project cannot be built until build path errors are resolved". The entire project builds just fine, meaning there are no red X's on any of the files. I can build the project outside of Eclipse, deploy it to the device, and it runs just fine, so I know there isn't a problem with my source code or layouts. The strange thing is when I remove the 'src' folder from the build path in Eclipse, clean and build the project, then re-add the 'src' folder to the build path and build the project it works again. However, within a few changes it gives me the same problem. Has anyone else encountered this before? Does anyone know of a solution? It's driving me mad! Thanks, -Dan

    Read the article

  • .NET and P2P - writing a P2P messenger

    - by brovar
    Hi there, Does anyone have any advice how to write such app? Or maybe knows some nice tutorial? I would like to use System.Net.PeerToPeer namespace, but everything I can find about it is MSDN which I can't read without getting mad. Or maybe using "old-school" TCP/IP would more efficient? I will appreciate every piece of advice. Every sample code I will shower with gold ;) And please, don't send me back to Google for I have searched for a long time for sth useful - maybe inaccurately but time is running out and I really need some help.

    Read the article

  • what in/out bound mail system to use ? hosted or not ?

    - by rick moss
    hi all I have a ruby / rails application that integrates in and outgoing email directly into the app. The app is going to be running on multiple domains each with posible many users sending and recieving email. I have looked into sendgrid, mailchimp and mad mimi as hosted services and also looked to create my own email server. There are advantages and disadvantages of both solutions and i am not sure which one to go down and am hoping someone can give me advice ?? Any help will be great. I know email is a hassle to manage but once set up correctly cant be that bad ?? Thanks in advance Rick

    Read the article

  • use multiple views in an application

    - by Gaurav Arora
    Hi All, I am new to Iphone programming. So please don't mind if I ask some basic questions. :mad: I want to develop an application where the landing screen will be a login screen and after login application should display a new screen with the list of available categories. And on selecting any category a new screen should appear with the information related to the selected category. Basically I want to display different screens in the applications and my confusion is how can I make different screens with one .xib file? or should I use different .xib files for each screen. If I use different .xib files for each screen then how should I navigate to different screens. Please help in solving this confusion. Thanks in advance Gaurav

    Read the article

  • OAuth iPhone client, problems with HTTP_AUTHORIZATION

    - by Rich
    Hi, I've been trying to implement OAuth in my iPhone app. However I have hit a problem. I have two servers, a local web server which is on my machine at home, I use this for testing. The machine is IIS 7 running PHP 5.08. Everything works fine on this server. However my live (web server) is running Apache and PHP 5.12. The problem is when I try to request a RequestToken the HTTP_AUTHORIZATION variable isn't posted to the web server, so I get an error returned from the server saying 'Invaild Consumer Key'. There is clearly a problem with the way the server is setup (as the code works on my local server). The code I am using is from this walkthrough http://code.google.com/p/oauthconsumer/wiki/UsingOAuthConsumer I have tried dumping the PHP headers and indeed HTTP_AUTHORIZATION is missing. Can anyone tell me how to fix this? (as it's driving me mad :)) Thanks Rich

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15  | Next Page >