Search Results

Search found 381 results on 16 pages for 'pts'.

Page 9/16 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • system overrides my mount parameters in /etc/fstab

    - by valya
    [.../~]$ mount /dev/sda4 on / type ext4 (rw,commit=60,commit=0) [.../~]$ cat /etc/fstab # UNCONFIGURED FSTAB FOR BASE SYSTEM UUID=70739c04-fcb6-4747-803c-824f9c894f41 / ext4 defaults,commit=60 0 1 What can I do about it? It seems strange. I want to be able to set any commit time I want Edit: added /proc/mounts contents [.../~]$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=886332k,nr_inodes=221583,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/disk/by-uuid/70739c04-fcb6-4747-803c-824f9c894f41 / ext4 rw,relatime,barrier=1,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 /dev/sda3 /media/megahard fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 cgroup /dev/cgroup/cpu cgroup rw,relatime,cpu,release_agent=/usr/local/sbin/cgroup_clean 0 0 gvfs-fuse-daemon /home/va1en0k/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0

    Read the article

  • stress testing opencl/Ati GPU on 12.04

    - by lurscher
    What does people normally use to stress test their GPU on ubuntu 12.04? I tried installing Phoronix Benchmark suite ubuntu .deb but it tries to install freeglu3-dev and at the same time complains about $ phoronix-test-suite benchmark pts/opencl The following dependencies are needed and will be installed: freeglut3-dev This process may take several minutes. Reading package lists... Building dependency tree... Reading state information... freeglut3-dev is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 90 not upgraded. There are dependencies still missing from the system: - OpenGL Utility Kit / GLUT 1: Ignore missing dependencies and proceed with installation. 2: Skip installing the tests with missing dependencies. 3: Re-attempt to install the missing dependencies. 4: Quit the current Phoronix Test Suite process. Missing dependencies action: 4 so even if it is installing freeglu3, it still complains about missing GLUT. You can't win against GLUT it seems So, what does people use for this? i mean, really, because i have tried googling for an hour and it is not paying up Thanks!

    Read the article

  • guvcview recording video and audio out of synchronisation in Ubuntu 10.10

    - by SIJAR
    I finally got Guvcview, a great software for Logitech webcam and it does all the stuff that one wants out of it. But I'm not satisfy with the video recording, video and audio out of synchronisation also video seems to be in slow motion. Please help so that I can tweak in and get a good video recording with the webcam. Below is the log of Guvcview ------------------------------------------------------------------------------- guvcview 1.4.1 video_device: /dev/video0 vid_sleep: 0 cap_meth: 1 resolution: 640 x 480 windowsize: 1024 x 715 vert pane: 578 spin behavior: 0 mode: mjpg fps: 1/25 Display Fps: 0 bpp: 0 hwaccel: 1 avi_format: 4 sound: 1 sound Device: 4 sound samp rate: 0 sound Channels: 0 Sound delay: 0 nanosec Sound Format: 85 Pan Step: 2 degrees Tilt Step: 2 degrees Video Filter Flags: 0 image inc: 0 profile(default):/home/sijar/default.gpfl starting portaudio... bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) bt_audio_service_open: connect() failed: Connection refused (111) Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started language catalog= dir:/usr/share/locale type:UTF-8 lang:en_US.utf8 cat:guvcview.mo mjpg: setting format to 1196444237 capture method = 1 video device: /dev/video0 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! /dev/video0 - device 1 libv4lconvert: warning more framesizes then I can handle! libv4lconvert: warning more framesizes then I can handle! Init. UVC Camera (046d:0825) (location: usb-0000:00:1d.7-5) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 160, height = 120 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 176, height = 144 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 176 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 320, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 352, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 432, height = 240 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 544, height = 288 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, { discrete: width = 640, height = 360 } Time interval between frame: 1/30, 1/25, 1/20, 1/15, 1/10, 1/5, ... repeats a couple of times ... vid:046d pid:0825 driver:uvcvideo Adding control for Pan (relative) UVCIOC_CTRL_ADD - Error: Operation not permitted checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls control[0]: 0x980900 Brightness, 0:255:1, default 128 control[0]: 0x980901 Contrast, 0:255:1, default 32 control[0]: 0x980902 Saturation, 0:255:1, default 32 control[0]: 0x98090c White Balance Temperature, Auto, 0:1:1, default 1 control[0]: 0x980913 Gain, 0:255:1, default 0 control[0]: 0x980918 Power Line Frequency, 0:2:1, default 2 control[0]: 0x98091a White Balance Temperature, 0:10000:10, default 4000 control[0]: 0x98091b Sharpness, 0:255:1, default 24 control[0]: 0x98091c Backlight Compensation, 0:1:1, default 1 control[0]: 0x9a0901 Exposure, Auto, 0:3:1, default 3 control[0]: 0x9a0902 Exposure (Absolute), 1:10000:1, default 166 control[0]: 0x9a0903 Exposure, Auto Priority, 0:1:1, default 0 resolutions of format(2) = 19 frame rates of 1º resolution=6 Def. Res: 0 numb. fps:6 --------------------------------------- device #0 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 (hw:0,0) Host API = ALSA Max inputs = 2, Max outputs = 2 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #1 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC ADC (hw:0,1) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #2 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - MIC2 ADC (hw:0,2) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #3 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - ADC2 (hw:0,3) Host API = ALSA Max inputs = 2, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #4 Name = Intel 82801DB-ICH4: Intel 82801DB-ICH4 - IEC958 (hw:0,4) Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #5 Name = USB Device 0x46d:0x825: USB Audio (hw:1,0) Host API = ALSA Max inputs = 1, Max outputs = 0 Def. low input latency = 0.011 Def. low output latency = -1.000 Def. high input latency = 0.043 Def. high output latency = -1.000 Def. sample rate = 48000.00 --------------------------------------- device #6 Name = front Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.012 Def. high input latency = -1.000 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #7 Name = iec958 Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #8 Name = spdif Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.011 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #9 Name = pulse Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 --------------------------------------- device #10 Name = dmix Host API = ALSA Max inputs = 0, Max outputs = 2 Def. low input latency = -1.000 Def. low output latency = 0.043 Def. high input latency = -1.000 Def. high output latency = 0.043 Def. sample rate = 48000.00 --------------------------------------- device #11 [ Default Input, Default Output ] Name = default Host API = ALSA Max inputs = 32, Max outputs = 32 Def. low input latency = 0.012 Def. low output latency = 0.012 Def. high input latency = 0.046 Def. high output latency = 0.046 Def. sample rate = 44100.00 ---------------------------------------------- SampleRate:0 Channels:0 Video driver: x11 A window manager is available VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_CTRL for user class controls control(0x0098091a) "White Balance Temperature" failed to set (error -1) VIDIOC_S_EXT_CTRLS for multiple controls failed (error -1) using VIDIOC_S_EXT_CTRLS on single controls for class: 0x009a0000 control(0x009a0902) "Exposure (Absolute)" failed to set (error -1) Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25371756K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cbd8b0]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cbd8b0]profile Baseline, level 3.0 [libx264 @ 0x8cbd8b0]non-strictly-monotonic PTS shift sound by -9 ms shift sound by -9 ms shift sound by -9 ms AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... AUDIO: droping audio data (/home/sijar/Videos/Webcam) 25371748K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... Cap Video toggled: 0 Shuting Down IO Thread AUDIO: droping audio data stop= 4426644744000 start=4416533023000 VIDEO: 146 frames in 10111.000000 ms = 14.439719 fps Stoping audio stream Closing audio stream... close avi Last message repeated 145 times [libx264 @ 0x8cbd8b0]frame I:2 Avg QP:14.10 size: 24492 [libx264 @ 0x8cbd8b0]frame P:103 Avg QP:16.06 size: 20715 [libx264 @ 0x8cbd8b0]mb I I16..4: 48.4% 0.0% 51.6% [libx264 @ 0x8cbd8b0]mb P I16..4: 57.5% 0.0% 0.0% P16..4: 40.2% 0.0% 0.0% 0.0% 0.0% skip: 2.3% [libx264 @ 0x8cbd8b0]final ratefactor: 62.05 [libx264 @ 0x8cbd8b0]coded y,uvDC,uvAC intra: 79.7% 92.2% 68.4% inter: 62.4% 87.5% 48.0% [libx264 @ 0x8cbd8b0]i16 v,h,dc,p: 23% 17% 41% 19% [libx264 @ 0x8cbd8b0]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 30% 24% 26% 2% 5% 3% 3% 3% 4% [libx264 @ 0x8cbd8b0]i8c dc,h,v,p: 53% 20% 23% 4% [libx264 @ 0x8cbd8b0]ref P L0: 63.0% 37.0% [libx264 @ 0x8cbd8b0]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Cap Video toggled: 1 (/home/sijar/Videos/Webcam) 25379744K bytes free on a total of 39908968K (used: 36 %) treshold=51200K using audio codec: 0x0055 Audio frame size is 1152 samples for selected codec IO thread started...OK [libx264 @ 0x8cfba20]using cpu capabilities: MMX2 SSE2 Cache64 [libx264 @ 0x8cfba20]profile Baseline, level 3.0 [libx264 @ 0x8cfba20]non-strictly-monotonic PTS shift sound by -236 ms shift sound by -236 ms shift sound by -236 ms (/home/sijar/Videos/Webcam) 25377044K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25373408K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25370696K bytes free on a total of 39908968K (used: 36 %) treshold=51200K AUDIO: droping audio data AUDIO: droping audio data AUDIO: droping audio data ... repeats a couple of times ... (/home/sijar/Videos/Webcam) 25367680K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25364052K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25360312K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25356628K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25352908K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25349316K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25345552K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25341828K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25338092K bytes free on a total of 39908968K (used: 36 %) treshold=51200K (/home/sijar/Videos/Webcam) 25334412K bytes free on a total of 39908968K (used: 36 %) treshold=51200K Cap Video toggled: 0 Shuting Down IO Thread stop= 4708817235000 start=4578624714000 VIDEO: 1604 frames in 130192.000000 ms = 12.320265 fps Stoping audio stream Closing audio stream... close avi Last message repeated 1603 times [libx264 @ 0x8cfba20]frame I:16 Avg QP:14.78 size: 42627 [libx264 @ 0x8cfba20]frame P:1547 Avg QP:16.44 size: 28599 [libx264 @ 0x8cfba20]mb I I16..4: 21.6% 0.0% 78.4% [libx264 @ 0x8cfba20]mb P I16..4: 28.1% 0.0% 0.0% P16..4: 70.5% 0.0% 0.0% 0.0% 0.0% skip: 1.4% [libx264 @ 0x8cfba20]final ratefactor: 88.17 [libx264 @ 0x8cfba20]coded y,uvDC,uvAC intra: 74.4% 95.8% 83.2% inter: 75.2% 94.6% 69.2% [libx264 @ 0x8cfba20]i16 v,h,dc,p: 27% 17% 40% 16% [libx264 @ 0x8cfba20]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 25% 25% 21% 3% 6% 4% 5% 4% 7% [libx264 @ 0x8cfba20]i8c dc,h,v,p: 61% 18% 18% 4% [libx264 @ 0x8cfba20]ref P L0: 64.0% 36.0% [libx264 @ 0x8cfba20]kb/s:-0.00 total frames encoded: 0 total audio frames encoded: 0 IO thread finished...OK IO Thread finished enabling controls Shuting Down Thread Thread terminated... cleaning Thread allocations: 100% SDL Quit Video Thread finished write /home/sijar/.guvcviewrc OK free audio mutex closed v4l2 strutures free controls free controls - vidState cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK

    Read the article

  • Why am I getting this "Connection to PulseAudio failed" error?

    - by Dave M G
    I have a computer that runs Mythbuntu 11.10. It has an external USB Kenwood Digital Audio device. When I open up pavucontrol, I get this message: If I do as the message suggests and run start-pulseaudio-x11, I get this output: $ start-pulseaudio-x11 Connection failure: Connection refused pa_context_connect() failed: Connection refused How do I correct this error? Update: Somewhere during the course of doing the suggested tests in the comments, a new audio device has now become visible in my sound settings. I have not attached or made any new device, so this must be the result of of some setting change. The device I use and know about is the Kenwood Audio device. The "GF108" device will play sound through the Kenwood anyway, but not reliably: Command line output as requested in the comments: $ ls -l ~/.pulse* -rw------- 1 mythbuntu mythbuntu 256 Feb 28 2011 /home/mythbuntu/.pulse-cookie /home/mythbuntu/.pulse: total 200 -rw-r--r-- 1 mythbuntu mythbuntu 8192 Oct 23 01:38 2b98330d36bf53bb85c97fc300000008-card-database.tdb -rw-r--r-- 1 mythbuntu mythbuntu 69 Nov 16 22:51 2b98330d36bf53bb85c97fc300000008-default-sink -rw-r--r-- 1 mythbuntu mythbuntu 68 Nov 16 22:51 2b98330d36bf53bb85c97fc300000008-default-source -rw-r--r-- 1 mythbuntu mythbuntu 49152 Oct 14 12:30 2b98330d36bf53bb85c97fc300000008-device-manager.tdb -rw-r--r-- 1 mythbuntu mythbuntu 61440 Oct 23 01:40 2b98330d36bf53bb85c97fc300000008-device-volumes.tdb lrwxrwxrwx 1 mythbuntu mythbuntu 23 Nov 16 22:50 2b98330d36bf53bb85c97fc300000008-runtime -> /tmp/pulse-EAwvLIQZn7e8 -rw-r--r-- 1 mythbuntu mythbuntu 77824 Nov 1 12:54 2b98330d36bf53bb85c97fc300000008-stream-volumes.tdb And yet more requested command line output: $ ps auxw|grep pulse 1000 2266 0.5 0.2 294184 9152 ? S<l Nov16 4:26 pulseaudio -D 1000 2413 0.0 0.0 94816 3040 ? S Nov16 0:00 /usr/lib/pulseaudio/pulse/gconf-helper 1000 4875 0.0 0.0 8108 908 pts/0 S+ 12:15 0:00 grep --color=auto pulse

    Read the article

  • Cannot connect to postgresql on port 5432

    - by Assaf Lavie
    I installed the Bitnami Django stack which included PostgreSQL 8.4. When I run psql -U postgres I get the following error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? PG is definitely running and the pg_hba.conf file looks like this: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 What gives? "Proof" that pg is running: root@assaf-desktop:/home/assaf# ps axf | grep postgres 14338 ? S 0:00 /opt/djangostack-1.3-0/postgresql/bin/postgres -D /opt/djangostack-1.3-0/postgresql/data -p 5432 14347 ? Ss 0:00 \_ postgres: writer process 14348 ? Ss 0:00 \_ postgres: wal writer process 14349 ? Ss 0:00 \_ postgres: autovacuum launcher process 14350 ? Ss 0:00 \_ postgres: stats collector process 15139 pts/1 S+ 0:00 \_ grep --color=auto postgres root@assaf-desktop:/home/assaf# netstat -nltp | grep 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 14338/postgres tcp6 0 0 ::1:5432 :::* LISTEN 14338/postgres root@assaf-desktop:/home/assaf#

    Read the article

  • ORACLE Fusion Middleware Summer Camps in Lisbon: Includes Advanced ADF Training by Oracle Product Management

    - by Frank Nimphius
    From July 9th - JUly 13th 2012, Frank Nimphius and Grant Ronald from the JDeveloper and ADF Product Management team present an 4 1/2 day advanced ADF Training Lisbon for the EMEA Oracle SOA Community. The training runs in parallel to an advanced WebCenter training giving you a chance to network with your peers during breaks and lunch. See below announcement by the ORACLE EMEA SOA Community for details:For Specialized partners who are working on following projects & opportunities, we (Oracle) offer these advanced summer camps:    ADF 11g     WebCenter Portal     SOA Suite 11g     ADF for BPM Suite 11     WebCenter Sites 11g All training sessions will be from HQ product management and our PTS team. The sessions will take place in July in Lisbon Portugal and Munich Germany. . Participation is limited to two people per company and bootcamp. Registration is handled by first come first serve, please pay attention to the skill requirements, the pre-requisitions and the follow up! We will not accept people onto the training who do not match the criteria!Lisbon: Monday, July 9th 11:00AM - Friday July 13th 16:00 PM (Lisbon time) ADF 11g advanced training by Grant Ronald and Frank Nimphius WebCenter Portal advanced training by Stefan Krantz and Angelo Santagata Cost: Free of charge, cancelation or no-show fee 2.000€Bootcamps are limited to 20 persons first come first serveFor details and registration please visit Lisbon registration page

    Read the article

  • mysql service do not launch

    - by ted
    Sorry for my English; I was trying to create db with rake in RoR application that has been configured for MySQL(gem installed, settings changed). After that attempt mysql-server broke: d@calister:~$ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) mysqld is not running at all: d@calister:~$ ps aux | grep mysql d 3769 0.0 0.0 4368 832 pts/0 S+ 18:03 0:00 grep --color=auto mysql And also it doesn't seem it would like to run: d@calister:~$ sudo service mysql start start: Job failed to start Any suggestions? Thanks EDIT: d@calister:~$ sudo -u mysql mysqld 120520 18:45:11 [Note] Plugin 'FEDERATED' is disabled. mysqld: Table 'mysql.plugin' doesn't exist 120520 18:45:11 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 120520 18:45:11 InnoDB: The InnoDB memory heap is disabled 120520 18:45:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins 120520 18:45:11 InnoDB: Compressed tables use zlib 1.2.3.4 120520 18:45:11 InnoDB: Initializing buffer pool, size = 128.0M 120520 18:45:11 InnoDB: Completed initialization of buffer pool 120520 18:45:11 InnoDB: highest supported file format is Barracuda. 120520 18:45:12 InnoDB: Waiting for the background threads to start 120520 18:45:13 InnoDB: 1.1.8 started; log sequence number 1589459 120520 18:45:13 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist

    Read the article

  • Disk space suddenly 100% used?

    - by dannymcc
    I'm trying to identify why, suddenly, 100% of our disk space is in use. I have already rebooted but the issue persists. Here are the outputs of some commands that are showing some strange (for me) results: danny@hydrogen:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/cciss/c0d0p1 130G 122G 949M 100% / none 1.9G 196K 1.9G 1% /dev none 2.0G 0 2.0G 0% /dev/shm none 2.0G 40K 2.0G 1% /var/run none 2.0G 0 2.0G 0% /var/lock none 2.0G 0 2.0G 0% /lib/init/rw danny@hydrogen:/$ sudo du -chs / du: cannot access `/proc/1662/task/1662/fd/4': No such file or directory du: cannot access `/proc/1662/task/1662/fdinfo/4': No such file or directory du: cannot access `/proc/1662/fd/4': No such file or directory du: cannot access `/proc/1662/fdinfo/4': No such file or directory danny@hydrogen:/$ df Filesystem 1K-blocks Used Available Use% Mounted on /dev/cciss/c0d0p1 135342296 128144108 323104 100% / none 1991336 196 1991140 1% /dev none 1995788 0 1995788 0% /dev/shm none 1995788 40 1995748 1% /var/run none 1995788 0 1995788 0% /var/lock none 1995788 0 1995788 0% /lib/init/rw danny@hydrogen:/$ mount /dev/cciss/c0d0p1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) danny@hydrogen:/$ sudo du -h --max-depth=1 634M ./premvet_sync 5.6M ./etc 4.0K ./opt 16K ./lost+found 7.4M ./bin 623M ./lib 196K ./dev 0 ./sys 4.0K ./srv 4.0K ./cdrom 8.0K ./media 52K ./tmp ... it hangs for ages here..... The server is running Ubuntu 10.04.4 LTS. System load: 2.85 Temperature: 8 C Usage of /: 94.7% of 129.07GB Processes: 132 Memory usage: 39% Users logged in: 0 Swap usage: 0% IP address for eth0: 192.168.1.124 => / is using 94.7% of 129.07GB I'm struggling to comprehend why this is happening! Any pointers would be appreciated.

    Read the article

  • Performance Overhead of Encrypted /home

    - by SabreWolfy
    I have a netbook with Windows on the second partition and Xubuntu (/ and /home) on the third partition. I selected to encrypt my home folder during installation. The performance of the netbook is adequate for the small machine that it is, but I'm looking to improve performance. I could not find much information about the overhead (CPU or drive) associated with home partition encryption. I ran the following, writing to my home partition as well as the the mounted Windows partition: dd if=/dev/zero of=~/dummy bs=512 count=10240 dd if=/dev/zero of=/media/Windows/dummy bs=512 count=10240 The first returned 2.4MB/s and the second returned 2.5MB/s. Can I therefore deduce that there is very little overhead to home folder encryption? I'm not sure if the different filesystems will make any difference (/ and /home are ext3). Update 1 I don't know why I didn't use /tmp instead of the mounted Windows folder. Only /home is encrypted, so /tmp is unencrypted ext3. The results of the dd as above are astounding: ~: 2.4 MB/s /tmp: 42.6 MB/s Comments please? The reason I am asking this is that disk access on the netbook is noticeably slow. Update 2 I timed each of the dd operations with time: ~: real 0m2.217s user 0m0.028s sys 0m2.176s /tmp: real 0m0.152s user 0m0.012s sys 0m0.136s See also: discussion on UbuntuForums.org and bug report Edit: Output of mount: /dev/sda3 on / type ext3 (rw,noatime,errors=remount-ro,user_xattr,commit=600) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/USER/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=USER) `

    Read the article

  • Clear data at serial port in Linux in C?

    - by ipkiss
    Hello guys, I am testing the sending and receiving programs with the code as The main() function is below: include include include include include include include "read_write.h" int fd; int initport(int fd) { struct termios options; // Get the current options for the port... tcgetattr(fd, &options); // Set the baud rates to 19200... cfsetispeed(&options, B9600); cfsetospeed(&options, B9600); // Enable the receiver and set local mode... options.c_cflag |= (CLOCAL | CREAD); options.c_cflag &= ~PARENB; options.c_cflag &= ~CSTOPB; options.c_cflag &= ~CSIZE; options.c_cflag |= CS8; // Set the new options for the port... tcsetattr(fd, TCSANOW, &options); return 1; } int main(int argc, char **argv) { fd = open("/dev/pts/2", O_RDWR | O_NOCTTY | O_NDELAY); if (fd == -1) { perror("open_port: Unable to open /dev/pts/1 - "); return 1; } else { fcntl(fd, F_SETFL, 0); } printf("baud=%d\n", getbaud(fd)); initport(fd); printf("baud=%d\n", getbaud(fd)); char sCmd[254]; sCmd[0] = 0x41; sCmd[1] = 0x42; sCmd[2] = 0x43; sCmd[3] = 0x00; if (!writeport(fd, sCmd)) { printf("write failed\n"); close(fd); return 1; } printf("written:%s\n", sCmd); usleep(500000); char sResult[254]; fcntl(fd, F_SETFL, FNDELAY); if (!readport(fd,sResult)) { printf("read failed\n"); close(fd); return 1; } printf("readport=%s\n", sResult); close(fd); return 0; } read_write.h: #include <stdio.h> /* Standard input/output definitions */ include /* String function definitions */ include /* UNIX standard function definitions */ include /* File control definitions */ include /* Error number definitions */ include /* POSIX terminal control definitions */ int writeport(int fd, char *chars) { int len = strlen(chars); chars[len] = 0x0d; // stick a after the command chars[len+1] = 0x00; // terminate the string properly int n = write(fd, chars, strlen(chars)); if (n < 0) { fputs("write failed!\n", stderr); return 0; } return 1; } int readport(int fd, char *result) { int iIn = read(fd, result, 254); result[iIn-1] = 0x00; if (iIn < 0) { if (errno == EAGAIN) { printf("SERIAL EAGAIN ERROR\n"); return 0; } else { printf("SERIAL read error %d %s\n", errno, strerror(errno)); return 0; } } return 1; } and got the issue: In order to test with serial port, I used the socat (https://help.ubuntu.com/community/VirtualSerialPort ) to create a pair serial ports on Linux and test my program with these port. The first time the program sends the data and the program receives data is ok. However, if I read again or even re-write the new data into the serial port, the return data is always null until I stop the virtual serial port and start it again, then the write and read data is ok, but still, only one time. (In the real case, the sending part will be done by another device, I am just taking care of the reading data from the serial port. I wrote both parts just to test my reading code.) Does anyone have any ideas? Thanks a lot.

    Read the article

  • updatedb & locate command problem - Files from external hard drive are no longer indexed after rebooting

    - by user784637
    Files from my external hard drive are no longer indexed after rebooting. I have to remount and then run # updatedb after each reboot. The problem is updatedb takes a few minutes for my external hard drives. Is there any way I can retain indexing for my externals after I reboot so that the locate command can search through my externals? EDIT: Per Request here are my specs: $ cat /etc/updatedb.conf PRUNE_BIND_MOUNTS="yes" # PRUNENAMES=".git .bzr .hg .svn" PRUNEPATHS="/tmp /var/spool /media" PRUNEFS="NFS nfs nfs4 rpc_pipefs afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf fuse.glusterfs fuse.sshfs ecryptfs fusesmb devtmpfs" # mount /dev/sda5 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/me/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=me) /dev/sdb1 on /media/me type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sdd1 on /media/Little Boy type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sde1 on /media/Fat Man type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) # on_ac_power; echo $? 255

    Read the article

  • How to rebuild fstab automatically

    - by yvoyer
    I accidentally removed all the entries from the fstab files while doing a backup (Yeah, I know ;)). I would like to know if there is a way to rebuild it with the current mount options, since I did not restart the server since the deletion. If there is no such program, could anybody help me rebuild it. Using this, I have found the command to show the current setup, but I don't know what to do with it. $ sudo blkid /dev/sda1: UUID="3fc55e0f-a9b3-4229-9e76-ca95b4825a40" TYPE="ext4" /dev/sda5: UUID="718e611d-b8a3-4f02-a0cc-b3025d8db54d" TYPE="swap" /dev/sdb1: LABEL="Files_Server_Int" UUID="02fc2eda-d9fb-47fb-9e60-5fe3073e5b55" TYPE="ext4" /dev/sdc1: UUID="41e60bc2-2c9c-4104-9649-6b513919df4a" TYPE="ext4" /dev/sdd1: LABEL="Expansion Drive" UUID="782042B920427E5E" TYPE="ntfs" $ cat /etc/mtab /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 none /lib/init/rw tmpfs rw,nosuid,mode=0755 0 0 none /var/lib/ureadahead/debugfs debugfs rw,relatime 0 0 /dev/sdc1 /home ext4 rw 0 0 /dev/sdb1 /media/Files_Server ext4 rw 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 /dev/sdd1 /media/Expansion\040Drive fuseblk rw,nosuid,nodev,allow_other,blksize=4096,default_permissions 0 0 gvfs-fuse-daemon /home/yvoyer/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=yvoyer 0 0 /dev/sdd1 /media/Backup500 fuseblk rw,nosuid,nodev,sync,allow_other,blksize=4096,default_permissions 0 0 /dev/sr0 /media/DIR-615 iso9660 ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,iocharset=utf8,mode=0400,dmode=0500 0 0 gvfs-fuse-daemon /home/cdrapeau/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=cdrapeau 0 0

    Read the article

  • Can't Mount Phone, "according to mtab, /dev/sdb1 is already mounted on /"

    - by RPG Master
    My myTouch Slide wasn't mounting, so I decided to open Disk Utility. My phone shows up but when I click "Mount" it gives me this error: Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed Here's my mtab: /dev/sdb1 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 none /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 none /dev devtmpfs rw,mode=0755 0 0 none /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 none /dev/shm tmpfs rw,nosuid,nodev 0 0 none /var/run tmpfs rw,nosuid,mode=0755 0 0 none /var/lock tmpfs rw,noexec,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/matthew/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=matthew 0 0 /dev/sdg1 /media/Seagate\040GoFlex ext4 rw,nosuid,nodev,uhelper=udisks 0 0 EDIT: Here's my fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=3b0db205-2bdb-4c98-a506-6bdd3520d540 none swap sw 0 0

    Read the article

  • WebLogic 12 hands-on bootcamps for partners–new dates & locations

    - by JuergenKress
    We offer free 2 days hands-on WebLogic 12c workshops for Oracle partners who want to become WebLogic Specialized: Register Here! Highlights of the workshop Quotes from previous Workshops Environment Setup and Weblogic Installation hands-on lab Weblogic Session Sharing hands-on lab Coherence hands-on lab WLS Session Replication with Coherence Web hands-on lab Weblogic Troubleshooting hands-on lab Weblogic JMS hands-on lab Exalogic & Oracle Cloud overview Oracle Enterprise Manager overview Oracle trainings are the best" Pedro Neto Novabase "Excellent training, well organized" Pedro Antunh, Capgemini "This course dives you into Oracle WebLogic giving you a quick start on benefiting from Fusion Apps" Leonardo Fernandes, Outsystems The event dates are following: Belgium 3rd - 4th October 2012 Oracle Vilvoorde South Africa 3rd –4th October 2012 Oracle Johannesburg Switzerland 25th - 26th October 2012 Oracle Baden-Dättwil Denmark 30th - 31st October 2012 Oracle Ballerup Norway 6th - 7th November 2012 Oracle Lysaker Netherlands 18th - 20th December 2012 Oracle Utrecht WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: WebLogic Bootcamp,WebLogic training,education,training,PTS,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Lost files after installing Ubuntu

    - by Joshua Rosato
    I installed Ubuntu on my laptop over windows, I had 2 partitions on one hard disk. It seems like my second partition is gone with all my files. How can I recover the old files? They weren't on the same partition as Windows. I read that the partition has probably just not been mounted so ran sudo fdisk -l to find all the partitions and then ran sudo mount, however I can't tell from the results of sudo mount what is not mounted and I am also unsure how to mount it once I find the unmounted partition. sudo fdisk -l - Results Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002c6dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris sudo mount - Results /dev/sda1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/cgroup type tmpfs (rw) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) none on /sys/fs/pstore type pstore (rw) systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd) gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=joshy1)

    Read the article

  • Accessing second hard drive

    - by Jonathan
    Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

    Read the article

  • Galaxy Note II MTP on Ubuntu 12.04

    - by Anass Ahmed
    I bought a branding new Galaxy Note II and I tried to mount its storage to my ubuntu laptop. As you know, Android 4.0+ uses MTP by default. Android 4.1 doesn't support USB Mass Storage anymore! So I have to use MTP to open my files via USB. I followed this article to get it work. It worked only for External Memory Card. but the internal cannot be reached! $mount /dev/sda3 on / type ext4 (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda5 on /media/Islamics type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda8 on /media/Technology type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) /dev/sda7 on /media/Misc type fuseblk (rw,noexec,nosuid,nodev,allow_other,blksize=4096) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/anass/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=anass) gvfs-fuse-daemon on /root/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev) mtpfs on /media/GalaxyNote2 type fuse.mtpfs (rw,nosuid,nodev,allow_other,user=anass)

    Read the article

  • Hide icons encrypted file system partitions in Nautilus

    - by Eddy Pronk
    I've installed Ubuntu 10.04 from the alternate CD. It has an encrypted root and swap partition. The root partition is visible in Nautilus as 'File Syste' icon. There is another icon "216 GB Filesystem". If I click it says: Unable to mount 216 GB Filesystem. /dev/mapper/sda5_crypt is mounted. Then there is another icon "6.1 GB Swap Space". If I click it it says: Unable to mount 6.1 GB Swap Space. Not a mountable file system. How can I hide these last two icons? Partition layout: $ sudo fdisk -l /dev/sda [sudo] password for eddyp: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa6e92df4 Device Boot Start End Blocks Id System /dev/sda1 1 11749 94373811 7 HPFS/NTFS /dev/sda2 11871 38914 217219073 5 Extended /dev/sda3 * 11750 11871 976896 83 Linux /dev/sda5 11871 38167 211220480 83 Linux /dev/sda6 38167 38914 5997568 83 Linux Partition table entries are not in disk order Mounted as: $ mount /dev/mapper/sda5_crypt on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda3 on /boot type ext4 (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/eddyp/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=eddyp) /dev/sda1 on /media/S3A6595D003 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)

    Read the article

  • Apache still running after uninstalling

    - by Ruslan Osipov
    I am trying to uninstall apache to install nginx, but it doesn't seem to work. $ ps aux | grep httpd root 22348 0.0 0.2 167252 8864 ? Ss 14:33 0:00 /usr/sbin/httpd -k start -DSSL apache 22353 0.0 0.1 167624 6088 ? S 14:33 0:00 /usr/sbin/httpd -k start -DSSL apache 22354 0.0 0.1 167252 5292 ? S 14:33 0:00 /usr/sbin/httpd -k start -DSSL apache 22355 0.0 0.1 167252 5052 ? S 14:33 0:00 /usr/sbin/httpd -k start -DSSL apache 22356 0.0 0.1 167252 5052 ? S 14:33 0:00 /usr/sbin/httpd -k start -DSSL apache 22357 0.0 0.1 167252 5052 ? S 14:33 0:00 /usr/sbin/httpd -k start -DSSL apache 22797 0.0 0.1 167252 5052 ? S 14:38 0:00 /usr/sbin/httpd -k start -DSSL 1003 22883 0.0 0.0 9388 884 pts/1 S+ 14:46 0:00 grep httpd $ which apache2 $ dpkg -S apache bash-completion: /etc/bash_completion.d/apache2ctl apparmor: /etc/apparmor.d/abstractions/apache2-common $ dpkg -S `which httpd` dpkg-query: no path found matching pattern /usr/sbin/httpd. The package seem to be uninstalled, but the processes are still running. And /usr/bin/httpd is still there. Any hints?

    Read the article

  • Killing a Plesk 11.5 backup process in Ubuntu

    - by Klaaz
    I want to kill a backup process initiated by Plesk in Ubuntu but don't know which processes safely can be killed: ps aux | grep backup root 20505 0.0 0.0 4392 604 ? Ss 01:43 0:00 /bin/sh -c [ -x /opt/psa/admin/sbin/backupmng ] && /opt/psa/admin/sbin/backupmng >/dev/null 2>&1 psaadm 20510 0.0 0.0 30884 1816 ? S 01:43 0:00 /opt/psa/admin/sbin/backupmng psaadm 20511 0.0 0.0 30884 644 ? S 01:43 0:01 /opt/psa/admin/sbin/backupmng psaadm 20512 0.0 0.6 270472 49356 ? S 01:43 0:03 /usr/bin/sw-engine -c /opt/psa/admin/conf/php.ini /opt/psa/admin/plib/backup/scheduled_backup.php --dump 1 root 20517 0.0 14.9 1400124 1214696 ? SN 01:43 0:27 /usr/bin/perl /opt/psa/admin/bin/plesk_agent_manager server --owner-uid=0bd9576c-f832-4362-b4f4-3c1afac22be2 --owner-type=server --dump-rotation=7 --backup-profile-name=serverXL_ --session-path=/opt/psa/PMM/sessions/2013-10-23-014303.864 --output-file=ftp://[email protected]//backup/serverXL/ --ftp-passive-mode root 27423 0.0 0.0 13652 888 pts/2 S+ 10:35 0:00 grep --color=auto backup root 29103 1.0 14.8 1400124 1209760 ? SN 02:16 5:21 /usr/bin/perl /opt/psa/admin/bin/plesk_agent_manager server --owner-uid=0bd9576c-f832-4362-b4f4-3c1afac22be2 --owner-type=server --dump-rotation=7 --backup-profile-name=serverXL_ --session-path=/opt/psa/PMM/sessions/2013-10-23-014303.864 --output-file=ftp://[email protected]//backup/serverXL/ --ftp-passive-mode root 29106 0.0 14.8 1400404 1212456 ? DN 02:16 0:07 /usr/bin/perl /opt/psa/admin/bin/plesk_agent_manager server --owner-uid=0bd9576c-f832-4362-b4f4-3c1afac22be2 --owner-type=server --dump-rotation=7 --backup-profile-name=serverXL_ --session-path=/opt/psa/PMM/sessions/2013-10-23-014303.864 --output-file=ftp://[email protected]//backup/serverXL/ --ftp-passive-mode It seems the FTP process is the culprit?

    Read the article

  • DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

    - by user97591
    I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

    Read the article

  • How to retain secondary hard drive mounts at reboot and keep shares?

    - by Tom
    I'm running Ubuntu 12.04. A second hard drive connected to this computer does not mount when the computer boots. Additionally, I have set up the drive to be shared but the share is not retained, the share is lost after each boot. My main system drive and a removable drive mount OK and shares remain between boots. Additional information follows: D2Linux sda1 is the secondary hard drive L-Freeagent sdc1 is the removeable drive Here is the contents of fstab immediately after booting (D2Linux /dev/sda1 not yet mounted): '# /etc/fstab: static file system information. ' '# ' '# Use 'blkid' to print the universally unique identifier for a ' '# device; this may be used with UUID= as a more robust way to name devices ' '# that works even if disks are added and removed. See fstab(5). ' '# ' '# ' proc /proc proc nodev,noexec,nosuid 0 0 '# / was on /dev/sdb1 during installation ' UUID=43d29a82-66b3-40f3-91ed-735a27a60004 / ext4 errors=remount-ro 0 1 '# swap was on /dev/sdb5 during installation UUID=cf8e3351-11d0-487a-8a6e-e499c2e88a10 none swap sw ' 0 0 Here is the output of mount with all drives mounted (I did not restore the share): /dev/sdb1 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/tom/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tom) /dev/sdc1 on /media/L-Freeagent type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda1 on /media/D2Linux type ext4 (rw,nosuid,nodev,uhelper=udisks) Thank you!

    Read the article

  • Extension GLX missing...on a desktop PC

    - by Bart van Heukelom
    I just installed Ubuntu 12.10 on a new PC with an Nvidia GTX 560 graphics card, but after installing the Nvidia proprietary drivers (either -current or -current-updates), Unity won't start. When trying to start it manually I get the message "extension GLX missing". I've searched around and found results like this question which point out it's a problem with Nvidia Optimus laptops. However, I don't have this problem on a laptop, but on a desktop PC. lshw output for the graphics card: *-display description: VGA compatible controller product: GF114 [GeForce GTX 560 SE] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:f4000000-f5ffffff memory:e0000000-e7ffffff memory:e8000000-ebffffff ioport:e000(size=128) memory:f6000000-f607ffff and CPU: *-cpu description: CPU product: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz vendor: Intel Corp. physical id: 40 bus info: cpu@0 version: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz slot: SOCKET 0 size: 1600MHz capacity: 3800MHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms cpufreq configuration: cores=4 enabledcores=4 threads=4

    Read the article

  • Cannot access the filesystems using LiveCD (LVM2,EXT2)

    - by ftkg
    I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

    Read the article

  • Accessing second hard drive

    - by Jonathan
    So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >