Search Results

Search found 1050 results on 42 pages for 'vga'.

Page 9/42 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Is it possible to update my graphic card drivers?

  - by madmaxpt

  This is what the lspci -v command shows in the VGA compatible controller section: 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: Dell Device 048e Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f0200000 (32-bit, non-prefetchable) [size=512K] I/O ports at 18d0 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 i915 is only compatible with OpenGL 1.4 and cannot use shaders and I'd like to use some Open GL 2.0 functionalities. Is it possible to update the drivers or is my hardware limited to OpenGL 1.4 ?

  Read the article

• PowerXpress error with Driver Catalyst. How can I fix it?

  - by J03Bukowski

  I have install Ubuntu 11.10 64bit on my Hp Dv6-3150el. My Notebook has two graphics cards: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series] I tried to install the proprietary graphics drivers ''fglrx'' available in "Additional Drivers", which does not give me 3D graphics acceleration (and I can't install those post-release). Then I can try to download and install from the website (I tried the version that Catalyst 11.8 11.12). The installation goes perfectly (I followed this guide and others), except that when I configure Xorg.conf file: sudo aticonfig --initial PowerXpress error: Cannot stat '/usr/lib64/fglrx': No such file or directory Failed to initialize libglx for discrete GPU

  Read the article

• Why doesn't Unity 3D work on my HD3000 integrated graphics?

  - by Zatsugami

  So I got my new laptop recently. HP Envy 15 with switchable graphics card. I'm using both windows and ubuntu, but for ubuntu I need just Intel HD3000 for better battery live. I've installed fglrx-updates and fglrx-amdcccle-updates. The drivers seems to work for my ATI card. The problem is, Intel HD3000 does not support Unity 3D. Why? My older Intel GMA 4500 did this. lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] (rev ff)

  Read the article

• Triple monitors on hybrid video system GeForce+Intel

  - by v_mil

  I use Lenovo Ideapad Z580A with hybrid video: GeForce+Intel with Ubuntu 12.10 x64 Ukrainian. It has internal display and two outputs: HDMI and VGA. When I connect third display to VGA all displays go black. Pressing alt+backspace and login causes output to two displays: internal and VGA. System Settings - Displays (or monitors - I have Ukrainian interface) shows three displays: two are on, one (DVI) is off. Turning DVI on and pressing apply causes an error: Can not set configuration of controller CRTC 65. BIOS setting is Optimus (two video cards). Driver for GeForce is Nouveau. With best regards. Viktor.

  Read the article

• How to install Radeon X600 driver

  - by mmrs151

  I am completely new to Ubuntu and now running into so many problems regarding my display. I will be so grateful to the community to help me out and keep me loving Ubuntu. When I run lspci | grep VGA I get the following output 01:00.0 VGA compatible controller: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] I am not sure if it means the driver is installed. Now the problem is I can not change the resolution like I can do in windows. I wanted to use dual monitor but it can not detect dual monitor. The monitor option in the preference shows 'Unknown' I tried to use a VGA switch for my ps3 and computer, but the computer is stuck with 1024x768 resolution. I have been trying for last three days, couldn't figure out anything. Now asking for you wisdom to get my display work. Regards, MMRAHMAN

  Read the article

• Dual monitor not working after an update

  - by Nimonika

  I did a package manager update yesterday and it turns out that my dual monitor setup has stopped working. I have poor vision so I really need to connect to a much bigger screen, but since yesterday, when I connect the screen to my laptop, the screen does not automatically reset itself to the laptop display. Even after lots of trial and error with the display settings, I am getting different dispalys on the laptop and external screen and right now only the big screen is active while the laptop has blanked out. Please can someone help me setup my dual screens for 11.10 properly. lspci -v | grep -i vga output 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]

  Read the article

• Installing drivers for switchable graphics

  - by Anonymous

  I recently bought a laptop that came with Windows 7 64-bit installed. I have some older (16-bit and 32-bit) software that doesn't work with 64-bit Windows, but works just fine with 32-bit. Since I also wanted to get rid of all of the pre-installed spam, I decided to wipe the hard drive and install a fresh copy of Windows 7 32-bit. I can't get the graphics cards working. This laptop uses switchable graphics, an Intel card and a Radeon card. I first tried installing this driver from Intel, which works for the Intel card. Of course, the Radeon card doesn't work with this driver and I need it for some of the newer games I have. I also tried this driver. Windows's device manager will recognize the Radeon card, but it will still use the Intel card. Also, even though that package says it contains the Intel driver, the Intel card still isn't properly recognized by Windows (leaving me with a nasty 800x600 resolution). On top of that, the Catalyst Control Center won't open (saying "The Catalyst Control Center is not supported by the driver version of your enabled graphics adapter") I tried installing HP's driver then installing Intel's driver on top of it. Device manager will then recognize both graphics cards properly. However, the laptop still uses the Intel card. The CCC still won't start (saying the same thing as before) and I can't find any of 'switching' graphics cards. Before formatting, I could right-click the desktop and click "Configure Switchable Graphics" This option hasn't been in the context menu regardless of what driver(s) I've installed. After some research, I found out that this menu entry runs the command "cli.exe Start PowerXpressHybrid" I've tried manually running this command, but I get the same unsupported message from CCC. So, does anyone know how I can get this working? I would like to be able to switch between the Intel and Radeon. But, if there's some way to disable the Intel and use only the Radeon, that would be fine I dual-boot with Linux (framebuffer uses the Intel, haven't even tried getting X set up yet) Here's the output of lspci # lspci -v | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Seymour [AMD Radeon HD 6470M] (prog-if 00 [VGA controller]) The laptop is a HP Pavilion g6t-1d00. HP doesn't support installing anything but Windows 7 64-bit, so calling tech support isn't an option. Thanks for any help UPDATE: I finally got it working. After a fresh install of Windows 7, I installed the HP driver (the one linked above). Then, there's an optional Windows update I installed (don't remember the exact name, but it'll stick out). After that, graphics switching works just like it's supposed to. Moab, thanks anyways for your help

  Read the article

• Xubuntu 14.04 resolution low

  - by user3203576

  I installed Xubuntu 14.04 amd64 on the computer at the computer repair shop where I work, but the screen resolution is way low, like 1024 x 768 (that wouldn't be low for a laptop or anything, but for a large desktop screen it is) I went to the display settings, but the resolution wouldn't go higher than that. When I installed Xubuntu 14.04 i386 at my computer at home, I didn't have any problems with the resolution. Any help? update: I ran lspci | grep VGA and got: 00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)

  Read the article

• Low graphics mode error on startup with NVIDIA graphics (12.04 LTS )

  - by champost

  My problem is similar to two other posts concerning ATI cards and 12.04 LTS: Post1 & Post2. In my case I use a Dell Precision M4300 laptop which uses a NVidia Quadro FX 880M. Doing a lspci | grep VGA gave me this: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [Quadro FX 880M] (rev a2) My workaround consists of logging in at the console and running sudo start lightdm which works perfectly but I am looking for a better workaround than this ?

  Read the article

• How to enable desktop effects on Ubuntu 10.04 after upgrade from Ubuntu 8.04?

  - by Manohar Bhattarai

  I upgraded my Ubuntu 8.04 to Ubuntu 10.04. When I try to enable desktop effects it says "Desktop effects could not be enabled". The output of "lspci | grep VGA" is : 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) Hardware drivers says there is no propriority hardware driver. I installed nVidia driver but I think my is an Intel graphics device. Please help.

  Read the article

• Display resolution in duplicate monitor

  - by Taher

  I use duplicate one monitor laptop LCD and other monitor that monitor resolution is bigger than laptop LCD how can i set laptop LCD resolution for them? when i use mirror button it set 1024 * 768 but my laptop LCD resolution is 1366 * 768 how can i set this resolution for them? because when i set this resolution i get error. My laptop is hp dv6 6080 and vga is intel sandy bridge if i change to AMD vga can i resolve this problem?

  Read the article

• 12.10 blue screen, desktop environnement does not load

  - by louis

  just upgraded to Ubuntu 12.10. I can't reach the desktop, it is stuck on the blue screen, the desktop environnement does not load. Can you help please? config: thinkpad T400, 6 GB of Ram, graphic card: Intel Gma 4500Mhd lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) I am not sure I have not messed up lightdm / gdm previously...

  Read the article

• No signal on monitor after plug it to a linux box

  - by yaroot

  I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back! I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console. Edit: just one pci-e video card, has dvi, vga, tv/out (s-video) Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.

  Read the article

• Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

  - by Slartibartfast

  I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

  Read the article

• Linux can dual display but windows can't?

  - by Mr_CryptoPrime

  I have two monitors, one that is hdmi-to-dvi and the other vga-to-dvi. I have an AMD HD Radeon 6900 series graphics card installed. I got Ubuntu to display dual monitors, but then I restarted for an update and then Ubuntu wouldn't even boot in recovery mode, it just kept cycling forever...displaying something about "timeout: killing [filepath] [hexadecimal]. So I tried booting into windows (7-professional) and it crashed and displayed this after rebooting: IRQL_NOT_LESS_OR_EQUAL, PAGE_FAULT-IN-NONPAGED-AREA. I went into Bios and reverted to the system defaults and ran system restore and it booted ok, but the dvi-to-dvi monitor would not display. I made sure my drivers were updated and catalyst was updated. Also through research discovered only one is for vga and the other is digital only, so I put the vga-to-dvi in the vga slot and so on. Neither windows or catalyst will detect the dvi-to-dvi montior. Any suggestions? Thanks. EDIT: Found out that booting into Ubuntu with only one monitor (using either monitor with either cable) worked perfectly fine. I could then add another monitor and it displays ok. However, it will, out of the blue, suddenly distort the display. At first I thought the computer crashed, but it is something with the video output from the GPU to the monitor because I pushed the power button and it would refresh every 5secs or so and I could see the "Ubuntu will power down in X seconds", even though it was horribly distorted. Any ideas what's causing this?

  Read the article

• Mac does not recognize wide screen

  - by DUKE

  I am using Mac OS X Lion 10.7.4 on my Mac mini, with Samsung monitor with default resolution 1360 x 768. My Mac mini is connected to Samsung VGA port by Apple mini port to VGA adapter. When starting, my Mac does not recognize the wide screen resolution and always starts in a 4:3 mode, (but it shows 1360x768 as the resolution in the settings). I have to do one of the following actions to bring my Mac to the wide screen resolution: (1) Changing to some other resolution and bring back to the default resolution. (2) Unplug the Apple mini port to VGA adapter and re-connect again. (3) Put the machine to sleep and wake it up again. I am using Ubuntu 12.04, (in a different partition) in the same hardware, but Ubuntu is perfectly recognizing the display.

  Read the article

• Black Screen when Computer Boots

  - by BlueRaja

  I'm having a serious problem with my computer; I think I've narrowed it down to the motherboard, but I'd like a second opinion before I spend the money. Before I moved into my new apartment, my desktop was working fine; now, it just won't work. It will turn on, the fans will spin up, lights come on... but nothing appears on the screen. No POST, nothing. I've tried: A different monitor (both are VGA) A different video-card (both are DVI, PCIe) Three different, known-good VGA-DVI adapters The onboard video port (VGA) Reseating the memory, and trying only one stick Different, known-good wall-outlets Unplugging the HDD and CD-drive from both the motherboard and PSU Replacing the PSU Has anyone had this happen before? Perhaps it's a known problem with this motherboard? Any advice!? Here are my specs: A13G+ V3.0 motherboard 2 2-gig 800mhz DDR2 600-watt PSU two older Geforce video cards

  Read the article

• 59 vs 60 hertz on external display via DisplayPort

  - by Shiki

  Don't know if this is a really specific question or you'll help me out. Please do. I just bought a DeLock DisplayPort cable for my Lenovo T500. Tried to use it with the in-built Intel MHD4500, no use. With the ATI HD3650 (you can switch between the two vga on this machine) I get a normal picture, but only on 59hz. On 60 I get a smaller desktop size (strange). Any idea what can cause this? Will I have any problem if I use the 59hz? (Was using the display with a VGA cable but I get a blurry picture with that (dont matter what device I attach, VGA is like this on this display) and thats why I wanted to change.)

  Read the article

• Graphics Startup Screen

  - by Wesley

  Specs: AMD Athlon XP 2400+ @ 1987 MHz / 2x 512MB PC3200 DDR RAM / 160GB IDE HDD / 128MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So, every time I start up my machine, there's a startup screen for the graphics card. It should display "NVIDIA GeForce 6200 VGA BIOS" with some other copyright information underneath it. However, it randomly changed to say "NV44A VGA BIOS." I think the GeForce 6200 codename is NV44A or something, but is there someway to change it back to say "GeForce 6200 VGA BIOS" or, if not, to completely stop it from showing upon startup? (Graphics drivers are all up to date.) Thanks in advance.

  Read the article

• Ubuntu - connecting 3rd monitor fails with "xrandr: cannot find crtc for output DVI-0"

  - by MDCore

  I've got a laptop with a DVI and VGA output on the back. With everything connected it will only allow me to run 2 of the 3 monitors e.g. laptop display + VGA or DVI+VGA but not all 3. xrandr says I have 2 CRTC's, 0 and 1. The internet says I should be able to share a CRTC if the modeline is the same, and my 2 external monitors are the exact same make and model. How do I convince the software to drive all this hardware?

  Read the article

• 2 GPUs (for multi-monitor setup)

  - by A Dwarf

  I have a machine to which I need to connect a second monitor. This machine currently hosts a ATI Radeon HD 4770 with two DVI adapters. The second monitor to be hooked to this machine is a VGA monitor. Until I find a DVI-VGA adpater, I'm thinking installing a second graphics card which does have a VGA adapter, an NVidia card. Can I successfully run both AMD and NVidia cards on this machine? Any specifics I must be aware of, like how to ensure the ATI card to be the main card? Operating system is Windows 7

  Read the article

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in?

  Read the article

• Display Resolution Getting Changed Automatically (sometimes) - Win7x64 - ASUS M3A78-EM

  - by kamleshrao

  Hi Guys, AMD PC Motherboard - ASUS M3A78-EM (installed VGA drivers from ASUS website - AMD_VGA_V863200_XPVistaWin7.zip) It has VGA and HDMI inbuilt ports (ATI Radeon HD 3200 Graphics 256MB) VGA is connected to my ViewSonic Monitor. HDMI is connected to LG LCD TV OS - Windows 7 x64 Ultimate Sometimes, when I reboot/start my PC, my ViewSonic display resolution changes and does not show the recommended value(1440x900) in Resolution Settings. The HDMI display works well always. But after multiple reboots/starts, the problem gets fixed automatically and I get back my recommended resolution on ViewSonic display. I am not making any changes to the existing drivers. It sometimes work well, and sometimes doesn't work. Can someone assist me resolving this permanently.

  Read the article

• ATI Radeon HD 5970 Display numbering issues

  - by Arindam Sen

  I have 2 computers on which i have ATI Radeon HD 5970 graphics card installed. There is 1 VGA out and 1 DVI out in it. When I connect my VGA out to a monitor on my 1st computer, it shows it as display 1 and when I connect my DVI out to a monitor it show it as display 2 (I am using extended display). When I do the same thing on my 2nd computer it shows just the opposite. The VGA out shows as display 2 and the DVI out shows as display 1. Is it a problem with the drivers or the hardware? (because the graphics card on both is exactly the same)

  Read the article

• Getting Synergy+ to work with Windows 7 64bit and Windows XP 32bit?

  - by john crisp

  My Windows XP box is Dell 4550 dimension. Windows 7 box is Home Premium. Synergy + installs fine on the Windows 7box, but using Windows xp as the client, it won't work? Do I need to disconnect the vga connection from my monitor and control entirely from the win7 dvi connection? In setting up ( links ) on Windows 7 as the server, I have NO way of inputing info? The setup on the Windows xp box is simple and does so OK, but I can't connect to the Windows xp box! It must be the vga connection on the Windows XP box. In order to use both machines, I have to turn one off and the other on. Hence-the VGA is needed on Windows XP. Any info/help most appreciated.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >