Search Results

Search found 5462 results on 219 pages for 'continue'.

Page 90/219 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

  • Discovering path through unknown territory

    - by TravisG
    Let's say all the AI knows about it's surroundings is a pixel-map that it has which clearly shows walkable terrain and obstacles. I want the AI to be able to traverse this terrain until it finds an exit point. There are some restrictions: There is always a way to the exit in the entire map that the AI walks around in, but there may be dead ends. The path to the exit is always pretty random, meaning that if you stand at crossroads, nothing indicates which direction would be the right one to go. It doesn't matter if the AI reaches a dead end, but it has to be able walk back out of it to a previously not inspected location and continue its search there. Initially, the AI starts out knowing only the starting area of the whole map. As it walks around, new points will be added to the pixel-map as the AI corresponding to the AIs range of sight (think of it like the AI is clearing the fog of war) The problem is in 2D space. All I have is the pixel map. There are no paths in the pixel map which are "too narrow". The AI fits through everything. It shouldn't be a brute force solution. E.g. it would be possible to simply find a path to each pixel in the pixel map that is yet undiscovered (with A*, for example), which will lead to the AI discovering new pixels. This could be repeated until the end is reached. The path doesn't have to be the shortest path (this is impossible without knowing the entire map beforehand), but when movements within the visible area are calculated, the shortest and from a human standpoint most logical path should be taken (e.g. if you can see a way out of your room into a hallway, you would obviously go there instead of exploring the corner of your current room). What kind of approaches to solve this problem are there?

    Read the article

  • Single Responsibility Principle - How Can I Avoid Code Fragmentation?

    - by Dean Chalk
    I'm working on a team where the team leader is a virulent advocate of SOLID development principles. However, he lacks a lot of experience in getting complex software out of the door. We have a situation where he has applied SRP to what was already quite a complex code base, which has now become very highly fragmented and difficult to understand and debug. We now have a problem not only with code fragmentation, but also encapsulation, as methods within a class that may have been private or protected have been judged to represent a 'reason to change' and have been extracted to public or internal classes and interfaces which is not in keeping with the encapsulation goals of the application. We have some class constructors which take over 20 interface parameters, so our IoC registration and resolution is becoming a monster in its own right. I want to know if there is any 'refactor away from SRP' approach we could use to help fix some of these issues. I have read that it doesn't violate SOLID if I create a number of empty courser-grained classes that 'wrap' a number of closely related classes to provide a single-point of access to the sum of their functionality (i.e. mimicking a less overly SRP'd class implementation). Apart from that, I cannot think of a solution which will allow us to pragmatically continue with our development efforts, while keeping everyone happy. Any suggestions ?

    Read the article

  • Great Blog Comments

    - by Paul Sorensen
    Just a quick note to let you know that in the interest of keeping the most useful content available here on the Oracle Certification Blog, we do moderate the comments. We welcome (and encourage dialog, questions, comments, etc) here on the topics at hand. We'll never 'censor' out a comment just because we don't like it - in fact, this is how we often learn ways in which we can do better. But of course we will filter out the typical list like anyone else: crude/offensive remarks, foul language, reference to illegal activity, etc. We will also often redirect any customer-service type inquiries to [email protected] where they can best be handled.Also, if you have a question of a general nature, please research it on the Oracle Certification website first. We often won't respond to questions asking such as "tell me how to get 11g ocp", as we've already made sure that you have that kind of information available. Now if we've inadvertently 'hidden' something on our site (gulp), then fair enough - please let us know that you're having a hard time finding it and we'll be sure to try and "unbury it" ;-)Additionally, you may have more of an 'opinion' type question, such as "should I do 'x' certification or 'y' certification." For these, we highly recommend checking on the Oracle Technology Network (OTN) Certification Forum, where you can engage in peer-to-peer discussions, share techniques, advice and best practices with others in the field.In the meantime, please continue to share your thoughts, ideas, opinions, tech tips etc - we look forward to seeing them and passing them wherever we can!QUICK LINKS:Oracle Certification WebsiteEmail - Customer ServiceOracle Technology Network (OTN) Certification Forum

    Read the article

  • Hot fix published for TFS2010 upgrade issues

    - by jehan
    Microsoft has released a hot fix for the issues that are identified after the migration of TFS2005/TFS2008 servers to TFS2010. The issues are related to Merging and Labels: ·         Labels that were created before the upgrade are entirely empty.  Labels could be also have incorrect contents. ·         The merge wizard in Visual Studio does not display all valid merge targets for a given source path/branch. ·         During merging, merge candidates are shown for changes that were already merged prior to the upgrade. If you have not yet upgraded to TFS 2010, the hotfix is now available and is highly recommended to be applied before configuring your team project collections. Because this hotfix applies to the upgrade of version control content, it must be applied after TFS 2010 setup is complete, but before configuration is started.  At the end of the setup experience, the Success screen is shown indicating the completion of the installation.  Normally, users will continue on to the configuration part, but in this case, the user need to cancel the configuration part by un-checking the “Launch Team Foundation Server Configuration Tool” box, which will enable the Cancel button. After exiting setup, the hotfix executable can be run to update the upgrade steps. Once the hotfix is installed, the TFS Configuration Wizard will need to be re-launched from the Start Menu to complete the upgrade process.    The hotfix has been published on MSDN Code Gallery – you can find it here: http://code.msdn.microsoft.com/KB2135068   If you have upgraded to TFS2010 and facing any of the above issues, then checkout this KB for Resolution: http://support.microsoft.com/kb/2193796/en-us

    Read the article

  • Unattended grub configuration after kernel upgrade

    - by bouke
    Today I have been working on automatic deployment of an ubuntu server. I got stuck on automatic updating of the server using apt-get upgrade trying to upgrade to a new kernel. The log looks like this: Setting up linux-image-3.2.0-24-generic (3.2.0-24.39) ... Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst (...) Then a question is presented: Package configuration +---------------------------------¦ +---------------------------------+ ¦ A new version of /boot/grub/menu.lst is available, but the version ¦ ¦ installed currently has been locally modified. ¦ ¦ ¦ ¦ What would you like to do about menu.lst? ¦ ¦ ¦ ¦ install the package maintainer's version ¦ ¦ keep the local version currently installed ¦ ¦ show the differences between the versions ¦ ¦ show a side-by-side difference between the versions ¦ ¦ show a 3-way difference between available versions ¦ ¦ do a 3-way merge between available versions (experimental) ¦ ¦ start a new shell to examine the situation ¦ ¦ ¦ ¦ ¦ ¦ <Ok> ¦ ¦ ¦ +----------------------------------------------------------------------+ The desired outcome would be to select the first option and to continue: Replacing config file /run/grub/menu.lst with new version Updating /boot/grub/menu.lst ... done After running the upgrade by hand, I used debconf-get-selections to inspect the correct answer for the question (see other settings). It seems like update_grub_changeprompt_threeway is the question that should be answered. However, setting this using debconf-set-selections presented me with the same question: debconf-set-selections <<< "grub grub/update_grub_changeprompt_threeway select install_new" apt-get -y dist-upgrade How can this question be automated?

    Read the article

  • Duke's Choice Award Goes Regional

    - by Tori Wieldt
    We are pleased to announce the expansion of the Duke's Choice Award program to include regional awards in conjunction with each international JavaOne conference.  The expanded Duke's Choice Award program celebrates Java innovation happening within specific regions and provides an opportunity to recognize winners locally. Regions include Latin America (LAD), Europe Africa Middle East (EMEA), and Asia.  The global program will  continue in association with the flagship JavaOne conference.  First up: Duke's Choice Awards LAD.  Three winners will be announced on stage during JavaOne Latin America December 4th to 6th and in the Jan/Feb issue of Java Magazine.   Submit your nominations now through October 30th!  Nominations are accepted from anyone, including Oracle employees,  for compelling uses of Java technology or community involvement.  Duke's Choice Awards LAD judges include community members Yara Senger (Brazil) and Alexis Lopez (Colombia). In keeping with the 10 year tradition of the Duke's Choice Award program, the most important ingredient is innovation. Let's recognize and celebrate the innovation that Java delivers within Latin America! www.java.net/dukeschoiceLAD To see the 2012 global Duke's Choice Awards winners now, subscribe to Java Magazine

    Read the article

  • Craftsmanship Tour Day 1: Didit Long Island

    - by Liam McLennan
    On Monday I was at Didit for my first ever craftsmanship visit. Didit seem to occupy a good part of a non-descript building in Rockville Centre Long Island. Since I had arrived early from Seattle I had some time to kill, so I stopped at the Rockville Diner on the corner of N Park Ave and Sunrise Hwy. I thoroughly enjoyed the pancakes and the friendly service. After walking to the Didit office I met Rik Dryfoos, the Didit Engineering Manager who organised my visit, and got the introduction to Didit and the work they are doing. I spent the morning in the room shared by the Didit developers, who are working on some fascinating deep engineering problems. After lunch at a local Thai place I setup a webcam to record an interview with Rik and Matt Roman (Didit VP of Engineering). I had a lot of trouble with the webcam, including losing several minutes of conversation, but in the end I was very happy the result. Here are the full interviews with Rik and Matt: Interview with Rik Dryfoos Interview with Matt Roman We had a great chat, much of which is captured in the recording. It was such great conversation that I almost missed my train to Manhattan. I’m sure Didit will continue to do well with such a dedicated and enthusiastic team. I sincerely thank them for hosting me for the day. If you are looking for a true agile environment and the opportunity to work with a high quality team then you should talk to Didit.

    Read the article

  • Introducing NFakeMail

    - by João Angelo
    Ever had to resort to custom code to control emails sent by an application during integration and/or system testing? If you answered yes then you should definitely continue reading. NFakeMail makes it easier for developers to do integration/system testing on software that sends emails by providing a fake SMTP server. You’ll no longer have to manually validate the email sending process. It’s developed in C# and IronPython and targets the .NET 4.0 framework. With NFakeMail you can easily automate the testing of components that rely on sending mails while doing its job. Let’s take a look at some sample code, we start with a simple class containing a method that sends emails. class Notifier { public void Notify() { using (var smtpClient = new SmtpClient("localhost", 10025)) { smtpClient.Send("[email protected]", "[email protected]", "S1", "."); smtpClient.Send("[email protected]", "[email protected]", "S2", ".."); } } } Then to automate the tests for this method we only need to the following: [Test] public void Notify_T001() { using (var server = new FakeSmtpServer(10025)) { new Notifier().Notify(); // Verifies two messages are received in the next five seconds var messages = server.WaitForMessages(count: 2, timeout: 5000); // Verifies the message sender Debug.Assert(messages.All(m => m.From.Address == "[email protected]")); } } The created FakeSmtpServer instance will act as a simple SMTP server and intercept the messages sent by the Notifier class. It’s even possible to verify some fields of each intercepted message and by default all intercepted messages are saved to the file system in MIME format.

    Read the article

  • How Can You Get More Productive In Life Sciences Sales?

    - by charles.knapp
    Only half of all doctors will meet with pharmaceutical sales reps, and that percentage continues to decrease. Furthermore, when reps are granted an opportunity to share information, the average interaction is only about a minute and a half. Concurrently, call quotas continue to increase. What does this matter? Sales reps need to spend less time on traditional planning and after-call reporting, more time making calls, and make more productive use of short presentation times. Fortunately for sales reps, Oracle offers the first life sciences CRM that is designed to double sales time and halve reporting time. In particular, our new Life Sciences Edition Offline Client is designed so that you can actually turn the screen around, so that your CRM is useful for presentations and not just reporting, whether you are connected to cloud or working offline such as in restricted clinical environments. Watch Piers Evans, Industry Strategy Director, show what this looks like in the day of a typical pharmaceutical sales representative. By use of this code snippet, I agree to the Brightcove Publisher T and C found at https://accounts.brightcove.com/en/terms-and-conditions/. -- This script tag will cause the Brightcove Players defined above it to be created as soon as the line is read by the browser. If you wish to have the player instantiated only after the rest of the HTML is processed and the page load is complete, remove the line. -- brightcove.createExperiences();

    Read the article

  • Updated Batch Best Practices

    - by ACShorten
    The Batch Best Practices whitepaper has been updated and published to My Oracle Support with the latest advice and new facilities. Two of the more interesting updates are: Addition of a Bache Cache Flush - Just like the online, the batch component of the framework caches data. It is now possible to refresh the cache manually using a new batch jobs F1-FLUSH. This is particularly useful if you execute long running threadpool workers across many different batch processes (submitters). New EXTENDED execution mode - A new specialist mode has been introduced for sites that use a large number of submitters (concurrent threads) and are experiencing intermittent communication issues in the threadpoolworker. This mode uses Oracle Coherences Extend mode to allow submitters to be allocated to threadpoolworkers via proxy connections. It differs from CLUSTERED mode in that a submitter can be explicitly allocated to a specific threadpoolworker via a proxy connection. This mode is only used for specific situation and customers should continue to use CLUSTERED mode gemerally. The whitepaper outlines advice for these new facilities and provides advice for existing functionality. The whitepaper is available from My Oracle Support at Doc Id: 836362.1.

    Read the article

  • Error with APE Server Installation

    - by sadmicrowave
    I was trying to install APE-Server from the .deb file at the ape-server homepage (www.ape-project.org) and I ran into an error so wanted to try removing the installation and reinstalling. I did a sudo apt-get remove ape-server which ran successfully but left ape-server folders in my /etc/ and /etc/init.d locations. Me being an idiot new comer to linux decided that manually delete those folders. Now when I reinstall the ape-server those folders don't get recreated and therefore I cannot send the /etc/init.d/ape-server [option] command because the folder is not found. When I try to sudo apt-get purge (or remove) ape-server I get the following sudo apt-get purge ape-server Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: ape-server* 0 upgraded, 0 newly installed, 1 to remove and 92 not upgraded. 1 not fully installed or removed. After this operation, 1,753kB disk space will be freed. Do you want to continue [Y/n]? y (Reading database ... 43924 files and directories currently installed.) Removing ape-server ... invoke-rc.d: unknown initscript, /etc/init.d/ape-server not found. dpkg: error processing ape-server (--purge): subprocess installed pre-removal script returned error exit status 100 update-rc.d: /etc/init.d/ape-server: file does not exist dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: ape-server E: Sub-process /usr/bin/dpkg returned an error code (1) My question is; how do I remove all of the ape-server installation packages that were installed so I can reinstall from scratch?

    Read the article

  • Can't install Ubuntu on my Windows 7 laptop

    - by Ana
    I tried installing Ubuntu in two different ways: First, I tried the Windows Installer, and it goes well until I reboot the system and, when booting on Ubuntu, I get the error: No root file system defined. Second, I uninstalled wubi by going to to Control Panel - Uninstall Programs - Ubuntu. Then, I booted the laptop from the live CD and selected install. It boots okay but in the screen right after the one that says to make sure you have 4.5 GB available, Internet connection, etc, when I click continue it throws me a message saying that Ubuntu had an internal error and asks me if I want to report the error. After that, I just have a black screen and nothing else! No Ubuntu installed, no boot option to go back to Windows. Nothing! My goal is to install Ubuntu alongside Windows 7 (without the hassle of formatting the computer, creating partition, etc). How can I do it (preferable using Windows Installer)? How can I solve the "No root file system defined" that I encountered when I used the Windows Installer?

    Read the article

  • Inheritance, commands and event sourcing

    - by Arthis
    In order not to redo things several times I wanted to factorize common stuff. For Instance, let's say we have a cow and a horse. The cow produces milk, the horse runs fast, but both eat grass. public class Herbivorous { public void EatGrass(int quantity) { var evt= Build.GrassEaten .WithQuantity(quantity); RaiseEvent(evt); } } public class Horse : Herbivorous { public void RunFast() { var evt= Build.FastRun; RaiseEvent(evt); } } public class Cow: Herbivorous { public void ProduceMilk() { var evt= Build.MilkProduced; RaiseEvent(evt); } } To eat Grass, the command handler should be : public class EatGrassHandler : CommandHandler<EatGrass> { public override CommandValidation Execute(EatGrass cmd) { Contract.Requires<ArgumentNullException>(cmd != null); var herbivorous= EventRepository.GetById<Herbivorous>(cmd.Id); if (herbivorous.IsNull()) throw new AggregateRootInstanceNotFoundException(); herbivorous.EatGrass(cmd.Quantity); EventRepository.Save(herbivorous, cmd.CommitId); } } so far so good. I get a Herbivorous object , I have access to its EatGrass function, whether it is a horse or a cow doesn't matter really. The only problem is here : EventRepository.GetById<Herbivorous>(cmd.Id) Indeed, let's imagine we have a cow that has produced milk during the morning and now wants to eat grass. The EventRepository contains an event MilkProduced, and then come the command EatGrass. With the CommandHandler, we are no longer in the presence of a cow and the herbivorious doesn't know anything about producing milk . what should it do? Ignore the event and continue , thus allowing the inheritance and "general" commands? or throw an exception to forbid execution, it would mean only CowEatGrass, and HorseEatGrass might exists as commands ? Thanks for your help, I am just beginning with these kinds of problem, and I would be glad to have some news from someone more experienced.

    Read the article

  • 8-Puzzle Solution executes infinitely [migrated]

    - by Ashwin
    I am looking for a solution to 8-puzzle problem using the A* Algorithm. I found this project on the internet. Please see the files - proj1 and EightPuzzle. The proj1 contains the entry point for the program(the main() function) and EightPuzzle describes a particular state of the puzzle. Each state is an object of the 8-puzzle. I feel that there is nothing wrong in the logic. But it loops forever for these two inputs that I have tried : {8,2,7,5,1,6,3,0,4} and {3,1,6,8,4,5,7,2,0}. Both of them are valid input states. What is wrong with the code? Note For better viewing copy the code in a Notepad++ or some other text editor(which has the capability to recognize java source file) because there are lot of comments in the code. Since A* requires a heuristic, they have provided the option of using manhattan distance and a heuristic that calculates the number of misplaced tiles. And to ensure that the best heuristic is executed first, they have implemented a PriorityQueue. The compareTo() function is implemented in the EightPuzzle class. The input to the program can be changed by changing the value of p1d in the main() function of proj1 class. The reason I am telling that there exists solution for the two my above inputs is because the applet here solves them. Please ensure that you select 8-puzzle from teh options in the applet. EDITI gave this input {0,5,7,6,8,1,2,4,3}. It took about 10 seconds and gave a result with 26 moves. But the applet gave a result with 24 moves in 0.0001 seconds with A*. For quick reference I have pasted the the two classes without the comments : EightPuzzle import java.util.*; public class EightPuzzle implements Comparable <Object> { int[] puzzle = new int[9]; int h_n= 0; int hueristic_type = 0; int g_n = 0; int f_n = 0; EightPuzzle parent = null; public EightPuzzle(int[] p, int h_type, int cost) { this.puzzle = p; this.hueristic_type = h_type; this.h_n = (h_type == 1) ? h1(p) : h2(p); this.g_n = cost; this.f_n = h_n + g_n; } public int getF_n() { return f_n; } public void setParent(EightPuzzle input) { this.parent = input; } public EightPuzzle getParent() { return this.parent; } public int inversions() { /* * Definition: For any other configuration besides the goal, * whenever a tile with a greater number on it precedes a * tile with a smaller number, the two tiles are said to be inverted */ int inversion = 0; for(int i = 0; i < this.puzzle.length; i++ ) { for(int j = 0; j < i; j++) { if(this.puzzle[i] != 0 && this.puzzle[j] != 0) { if(this.puzzle[i] < this.puzzle[j]) inversion++; } } } return inversion; } public int h1(int[] list) // h1 = the number of misplaced tiles { int gn = 0; for(int i = 0; i < list.length; i++) { if(list[i] != i && list[i] != 0) gn++; } return gn; } public LinkedList<EightPuzzle> getChildren() { LinkedList<EightPuzzle> children = new LinkedList<EightPuzzle>(); int loc = 0; int temparray[] = new int[this.puzzle.length]; EightPuzzle rightP, upP, downP, leftP; while(this.puzzle[loc] != 0) { loc++; } if(loc % 3 == 0){ temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 1]; temparray[loc + 1] = 0; rightP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); rightP.setParent(this); children.add(rightP); }else if(loc % 3 == 1){ //add one child swaps with right temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 1]; temparray[loc + 1] = 0; rightP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); rightP.setParent(this); children.add(rightP); //add one child swaps with left temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 1]; temparray[loc - 1] = 0; leftP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); leftP.setParent(this); children.add(leftP); }else if(loc % 3 == 2){ // add one child swaps with left temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 1]; temparray[loc - 1] = 0; leftP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); leftP.setParent(this); children.add(leftP); } if(loc / 3 == 0){ //add one child swaps with lower temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 3]; temparray[loc + 3] = 0; downP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); downP.setParent(this); children.add(downP); }else if(loc / 3 == 1 ){ //add one child, swap with upper temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 3]; temparray[loc - 3] = 0; upP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); upP.setParent(this); children.add(upP); //add one child, swap with lower temparray = this.puzzle.clone(); temparray[loc] = temparray[loc + 3]; temparray[loc + 3] = 0; downP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); downP.setParent(this); children.add(downP); }else if (loc / 3 == 2 ){ //add one child, swap with upper temparray = this.puzzle.clone(); temparray[loc] = temparray[loc - 3]; temparray[loc - 3] = 0; upP = new EightPuzzle(temparray, this.hueristic_type, this.g_n + 1); upP.setParent(this); children.add(upP); } return children; } public int h2(int[] list) // h2 = the sum of the distances of the tiles from their goal positions // for each item find its goal position // calculate how many positions it needs to move to get into that position { int gn = 0; int row = 0; int col = 0; for(int i = 0; i < list.length; i++) { if(list[i] != 0) { row = list[i] / 3; col = list[i] % 3; row = Math.abs(row - (i / 3)); col = Math.abs(col - (i % 3)); gn += row; gn += col; } } return gn; } public String toString() { String x = ""; for(int i = 0; i < this.puzzle.length; i++){ x += puzzle[i] + " "; if((i + 1) % 3 == 0) x += "\n"; } return x; } public int compareTo(Object input) { if (this.f_n < ((EightPuzzle) input).getF_n()) return -1; else if (this.f_n > ((EightPuzzle) input).getF_n()) return 1; return 0; } public boolean equals(EightPuzzle test){ if(this.f_n != test.getF_n()) return false; for(int i = 0 ; i < this.puzzle.length; i++) { if(this.puzzle[i] != test.puzzle[i]) return false; } return true; } public boolean mapEquals(EightPuzzle test){ for(int i = 0 ; i < this.puzzle.length; i++) { if(this.puzzle[i] != test.puzzle[i]) return false; } return true; } } proj1 import java.util.*; public class proj1 { /** * @param args */ public static void main(String[] args) { int[] p1d = {1, 4, 2, 3, 0, 5, 6, 7, 8}; int hueristic = 2; EightPuzzle start = new EightPuzzle(p1d, hueristic, 0); int[] win = { 0, 1, 2, 3, 4, 5, 6, 7, 8}; EightPuzzle goal = new EightPuzzle(win, hueristic, 0); astar(start, goal); } public static void astar(EightPuzzle start, EightPuzzle goal) { if(start.inversions() % 2 == 1) { System.out.println("Unsolvable"); return; } // function A*(start,goal) // closedset := the empty set // The set of nodes already evaluated. LinkedList<EightPuzzle> closedset = new LinkedList<EightPuzzle>(); // openset := set containing the initial node // The set of tentative nodes to be evaluated. priority queue PriorityQueue<EightPuzzle> openset = new PriorityQueue<EightPuzzle>(); openset.add(start); while(openset.size() > 0){ // x := the node in openset having the lowest f_score[] value EightPuzzle x = openset.peek(); // if x = goal if(x.mapEquals(goal)) { // return reconstruct_path(came_from, came_from[goal]) Stack<EightPuzzle> toDisplay = reconstruct(x); System.out.println("Printing solution... "); System.out.println(start.toString()); print(toDisplay); return; } // remove x from openset // add x to closedset closedset.add(openset.poll()); LinkedList <EightPuzzle> neighbor = x.getChildren(); // foreach y in neighbor_nodes(x) while(neighbor.size() > 0) { EightPuzzle y = neighbor.removeFirst(); // if y in closedset if(closedset.contains(y)){ // continue continue; } // tentative_g_score := g_score[x] + dist_between(x,y) // // if y not in openset if(!closedset.contains(y)){ // add y to openset openset.add(y); // } // } // } } public static void print(Stack<EightPuzzle> x) { while(!x.isEmpty()) { EightPuzzle temp = x.pop(); System.out.println(temp.toString()); } } public static Stack<EightPuzzle> reconstruct(EightPuzzle winner) { Stack<EightPuzzle> correctOutput = new Stack<EightPuzzle>(); while(winner.getParent() != null) { correctOutput.add(winner); winner = winner.getParent(); } return correctOutput; } }

    Read the article

  • Black screen appears when booting new install of 11.10 on my desktop, cannot access Grub menu to fix

    - by Cee
    I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

    Read the article

  • Best way to use GIT to maintain web application template

    - by Darren
    I am a sole developer and I have a web application template that I have created in Visual Studio. I am using GIT for source control, but only on my development machine. Presently I have a master and I create branches for new features, merging them back in to the master as I complete the features. I am at a point now where I am ready to use the template for deployments, and of course I want to continue adding new features via branching/merging. My question is: what would be the typical/recommended way for me to create application deployments based on the master? Should I clone the repository into a new directory that is for a particular web application? Or should I also use branching to do project development based on the main project? The projects would never be merged back into the master. However, it would be nice if I could merge future features into the master and have the ability to incorporate them into previously completed projects if desired. For more specific details of my environment: I am using TortoiseGIT in Windows 7, Visual Studio 2012, ASP.NET Web Pages. Obviously the main differences between deployments would simply be differing pages, CSS files and jQuery scripts. I found this post as I was writing this one. In order to do this should I clone the master repository and checkout from it?

    Read the article

  • Can Near Field Communications (NFC) Benefit your Supply Chain?

    - by Stephen Slade
    Leading firms continue to leverage the latest tools and technologies to drive performance especially around minimizing transaction costs. With razor thin margins in manufacturing and distribution, the leading producers are resorting to Near Field Communications to gain efficiencies.  In this week’s CIO magazine (Apr1, 2012, pg.30, see http://www.cio.com)  Lauren Brousell talks of the things you need to know to make a more informed decision with NFC.  Sandy Shen of Gartner says NFC appeals because "it supports any services that requires data transfer and authentication' 1. NFC is Cheap and Easy - short range transmitting technology connecting smartphones to data transfer. 2. Adoption Seems Inevitable - more merchants will use NCF for payments in the futures. Wallets are becoming obsolete. 3. It's a Hot Potato for Enterprise - Business with credit card companies and cell phone providers are debating who handles the billing process. 4. It's in use Overseas. Japan uses FeliCa to pay by smartphone. In the US, billing agreements are causing territorial conflict. 5. Security Risks Come Standard. As people lose HH devices, security will be an ongoing concern. Credentials and timeout features and alleviate to some extent. My prediction: In 5 years, we won't have wallets in our pockets.  Our secure and all-powerful smart phones will be our electronic portable banks and execute the transaction for us based on our preferences and propensities and electronically execute the transaction for the supply chain.

    Read the article

  • Does ssh key need to be named id_rsa?

    - by dustyprogrammer
    I have come across this problem a couple of times when creating build servers with keyed authentication. I was wondering if anyone else has experience this. I have a couple of keys for my current user that may connect to different machines. Let say machine1 and machine2. I have pasted my public key into their respective authorized_keys file. The first one I have named the first key id_rsa and the second key bender. When I try to connect to bender I get the following output with my verbose ssh connection debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/bozo/.ssh/.ssh/identity debug1: Trying private key: /home/bozo/.ssh/.ssh/id_rsa debug1: Trying private key: /home/bozo/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). It only offers the id_rsa key, as you can see above. Is this correct? If so why? How do I get it to offer more keys? I know it is a problem I see intermittently, because I at home I have multiple keys without much trouble. I would also appreciate a overview on how the pub and private keys interact with the client and server. I thought I had a pretty decent idea, but apparently I am missing something. Please and thank you.

    Read the article

  • MVVM Project and Item Templates

    - by Timmy Kokke
    Intro This is the first in a series of small articles about what is new in Silverlight 4 and Expression Blend 4. The series is build around a open source demo application SilverAmp which is available on http://SilverAmp.CodePlex.com.   MVVM Project and Item Templates Expression Blend has got a new project template to get started with a Model-View-ViewModel project  easily. The template provides you with a View and a ViewModel bound together. It also adds the ViewModel to the SampleData of your project. It is available for both Silverlight and Wpf. To get going, start a new project in Expression Blend and select Silverlight DataBound Application from the Silverlight project type. In this case I named the project DemoTest1. The solution now contains several folders: SampleData; which contains a data to show in Blend ViewModels; starts with one file, MainViewModel.cs Views; containing MainView.xaml with codebehind used for binding with the MainViewModel class. and your regular App.xaml and MainPage.xaml The MainViewModel class contains a sample property and a sample method. Both the property and the method are used in the MainView control. The MainView control is a regular UserControl and is placed in the MainPage. You can continue on building your applicaition by adding your own properties and methods to the ViewModel and adding controls to the View. Adding Views with ViewModels is very easy too. The guys at Microsoft where nice enough to add a new Item template too: a UserControl with ViewModel. If you add this new item to the root of your solution it will add the .xaml file to the views folder and a .cs file to the ViewModels folder. Conclusion The databound Application project type is a great to get your MVVM based project started. It also functions a great source of information about how to connect it all together.   Technorati Tags: Silverlight,Wpf,Expression Blend,MVVM

    Read the article

  • Project Euler 19: (Iron)Python

    - by Ben Griswold
    In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 19.  As always, any feedback is welcome. # Euler 19 # http://projecteuler.net/index.php?section=problems&id=19 # You are given the following information, but you may # prefer to do some research for yourself. # # - 1 Jan 1900 was a Monday. # - Thirty days has September, # April, June and November. # All the rest have thirty-one, # Saving February alone, # Which has twenty-eight, rain or shine. # And on leap years, twenty-nine. # - A leap year occurs on any year evenly divisible by 4, # but not on a century unless it is divisible by 400. # # How many Sundays fell on the first of the month during # the twentieth century (1 Jan 1901 to 31 Dec 2000)? import time start = time.time() import datetime sundays = 0 for y in range(1901,2001): for m in range(1,13): # monday == 0, sunday == 6 if datetime.datetime(y,m,1).weekday() == 6: sundays += 1 print sundays print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

    Read the article

  • SOA Partner Community Workspace

    - by JuergenKress
    To share the latest information with the community we use the SOA Community Workspace (SOA Community membership required). At the workspace you can find training material, product presentations in ppt format, product roadmaps, sales kits, market kits, training calendar and many additional information. Please use this content in the spirit of our partnership, and do not share external confidential material (be aware of the OTN NDA). The workspace is organized by product categories in folders e.g. SOA or Business Process Management or Applications & Fusion Middleware. You can also use tags to navigate within the workspace. For large downloads we do recommend to map the workspace as a network drive or to use the ftp functions. Please be very careful when you use the workspace, as we granted everybody full access including to add and delete documents. Please do NOT delete any content. Each action creates e-mail alerts for subscribed users. You can unsubscribe these alerts at the admin page à navigate to the All Workspaces tab à click on the workspace à switch the subscription off. It would be great if you can continue to share your best practice and knowledge within the community. Therefore we also created the folder Presentations from Partners. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: Workspace,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

    Read the article

  • apt-get upgrade gives "403 forbidden" error

    - by 3l4ng
    I'm running Ubuntu 13.04 64b. sudo apt-get update works fine, but when I run sudo apt-get upgrade I get these errors: Err http://archive.ubuntu.com/ubuntu/ raring-updates/main python3.3-minimal amd64 3.3.1-1ubuntu5.2 403 Forbidden Err http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu/ raring/main gimp amd64 2.8.6-0raring1~ppa 403 Forbidden Err http://archive.ubuntu.com/ubuntu/ raring-security/main python3.3-minimal amd64 3.3.1-1ubuntu5.2 403 Forbidden Err http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu/ raring/main gimp-help-en all 1:2.8-0raring16~ppa 403 Forbidden Failed to fetch http://archive.ubuntu.com/ubuntu/pool/main/p/python3.3/python3.3-minimal_3.3.1-1ubuntu5.2_amd64.deb 403 Forbidden Failed to fetch http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu/pool/main/g/gimp/gimp_2.8.6-0raring1~ppa_amd64.deb 403 Forbidden Failed to fetch http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu/pool/main/g/gimp-help/gimp-help-en_2.8-0raring16~ppa_all.deb 403 Forbidden E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? Running sudo apt-get upgrade --fix-missing installs some updates, but the above errors still persist when I run apt-get upgrade again. The software update app shows the error: https://www.dropbox.com/s/2cr450557hmahzz/software_update.jpg and selecting continue shows: https://www.dropbox.com/s/l7u32sxyfbxxeeg/soft_upd2.jpg (sorry for the links, I don't have enough rep to post images) I am behind a proxy, but apt-get update and web browsing work without issues. I also do not believe a server being down is causing this, as the problem has been there over a month. Any ideas on how to fix this?

    Read the article

  • With which class to start Test Driven Development of card game application? And what would be the next 5 to 7 tests?

    - by Maxis
    I have started to write card game applications. Some model classes: CardSuit, CardValue, Card Deck, IDeckCreator, RegularDeckCreator, DoubleDeckCreator Board Hand and some game classes: Turn, TurnHandler IPlayer, ComputerPlayer, HumanPlayer IAttackStrategy, SimpleAttachStrategy, IDefenceStrategy, SimpleDefenceStrategy GameData, Game are already written. My idea is to create engine, where two computer players could play game and then later I could add UI part. Already for some time I'm reading about Test Driven Development (TDD) and I have idea to start writing application from scratch, as currently I have tendency to write not needed code, which seems usable in future. Also code doesn't have any tests and it is hard to add them now. Seems that TDD could improve all these issue - minimum of needed code, good test coverage and also could help to come to right application design. But I have one issue - I can't decide from where to start TDD? Should I start from bottom - Card related classes or somewhere on top - Game, TurnHandler, ... ? With which class you would start? And what would be the next 5 to 7 tests? (use the card game you know the best) I would like to start TDD with your help and then continue on my own!

    Read the article

  • KERPOOOOW!

    - by Matt Christian
    Recently I discovered the colorful world of comic books.  In the past I've read comics a few times but never really got into them.  When I wanted to start a collection I decided either video games or comics yet stayed away from comics because I am less familiar with them. In any case, I stopped by my local comic shop and picked up a few comics and a few trade paperbacks.  After reading them and understanding their basic flow I began to enjoy not only the stories but the art styles hiding behind those little white bubbles of text (well, they're USUALLY white).  My first stop at the comic store I ended up with: - Nemesis #1 (cover A) - Shuddertown #1 (cover A I think) - Daredevil: King of Hell's Kitchen Trade Paperback - Peter Parker: Spiderman - One Small Break Trade Paperback It took me about 3-4 days to read all of that including re-reading the single issues and glancing over the beginning of Daredevil again.  After a week of looking around online I knew a little more about the comics I wanted to pick up and the kind of art style I enjoyed.  While Peter Parker: Spiderman was ok, I really enjoyed the detailed, realistic look of Daredevil and Shuddertown. Now, a few years back I picked up the game The Darkness for PS3.  I knew it was based off a comic but never read the comic.  I decided I'd pick up a few issues of it and ended up with: - The Darkness #80 (cover A) - The Darkness #81 (cover A) - The Darkness #82 (cover A) - The Darkness #83 (cover A) - The Darkness Shadows and Flame #1  (one-shot; cover A) - The Darkness Origins: Volume 1 Trade Paperback (contains The Darkness #1-6) - New Age boards and bags for storing my comics The Darkness is relatively good though jumping from issue #6 to issue #80 I lost a bit on who the enemy in the current series is.  I think out of all of them, issue #83 was my favorite of them. I'm signed up at the local shop to continue getting Nemesis, The Darkness, and Shuddertown, and I'll probably pick up a few different ones this weekend...

    Read the article

  • 2-D Codes in Retail

    - by David Dorf
    The UPC you find on packaging is a one-dimensional barcode that's been in use, in one form or another, since the 1970s. While its a good symbology to encode numbers like a product identifier, its not really big enough to hold much more. It also requires a barcode scanner (like those connected to the POS), although iPhone apps like RedLaser have proved a mobile camera can be made to work in many situations. The next generation barcodes are two-dimensional and therefore capable of holding much more information as well as being more conducive to cameras. The most popular format is the QR Code, widely used in Japan because almost every mobile phone has a built-in reader. A typical use for QR Codes is to embed a URL so that that a mobile phone can quickly navigate to the specified web page. QR Codes can be found on posters, billboards, catalogs, and circulars. Speaking of which, Best Buy recently put a QR code in their circular as shown below. If fact, they even updated their iPhone application to include a QR Code reader. I was able to scan the barcode above right from the screen with my iPhone without issues, even though its fairly small in this image. Clearly they are planning to incorporate more QR Codes in their stores and advertising. If you haven't seen QR Codes before, you're not looking hard enough. They are around and will continue to spread.

    Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >