Search Results

Search found 5545 results on 222 pages for 'future'.

Page 91/222 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Can a consumer wireless router act as both a wireless client and access point?

  - by glibdud

  I'm going to be moving in the future, and integrating my home network into that of my landlord. I wish to maintain an isolated network while using his internet connection, so I'm planning on cascading my router off of his (WAN-to-LAN type configuration). Unfortunately, it looks like it might not be feasible to run a wire between the two. Therefore, I'd like to send my WAN connection over WiFi to his router. At my disposal, I have a WRT54GL (running Shibby's Tomato mod), and I just bought an Asus RT-N66U (I can be flexible with the firmware). My first thought was to set up the WRT as a wireless bridge, then run a wire between that and the N66U's WAN port. I'm reasonably sure I could make that work, but can I eliminate the WRT from the equation altogether? Can the N66U connect to the landlord's WiFi as a client, effectively using that as the WAN port, while simultaneously providing wireless access to my devices on an altogether different WLAN?

  Read the article

• CentOS-Like configuration of Vim on Ubuntu

  - by matejkramny

  Whenever I use a CentOS System, there's always a pleasant configuration of vim which mainly does the following: Remembering position of closed files Colour mode (!!!) Bash has colours There's lots more, just not something i can recall on the spot. Then, i go to ubuntu and its all black and white, no nice vim config etc. I have to use Ubuntu, and I hate ubuntu because of this. I know I can all configure it by myself, so my question is: How can I configure the Ubuntu system to behave (aesthetically) like CentOS? PS to future self: I will be stoned to death for asking such a question.

  Read the article

• How to ask Debian not to check last mount time of its file system?

  - by Landy

  I'm using Debian 6.0.5. To test a feature of my product, I need to modify the system date&time back and forth frequently. Once a time I set the system date back to one month ago, then I reboot the system, and it reported the last mount time of the file system is in the future and enter the maintenance mode automatically. I had to run the fsck to make sure the file system is not broken to boot into Debian. Is there any way to ask Debian stop checking the last mount time of its file system when booting? Thanks.

  Read the article

• zero downtime during database scheme upgrade on SQL 2008

  - by eject

  I have web application on IIS7 with SQL server 2008 as RDBMS. Need get 0 downtime during future upgrades of ASP.NET code and DB schema as well. I need to get right scenario for this. I have 2 web servers and 2 sql servers and one http load balancer whcih allows to switch web backend server for web requests. Main goal is to make 1st web server and DB server up and running, update code and db schema on 2nd server and then switch all the requests to 2nd server and then main problem - how to copy data from 1st database 2nd (which was changed during upgrade).

  Read the article

• Is WEP used in conjunction with a wireless access list adequate security?

  - by LeopardSkinPillBoxHat

  I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

  Read the article

• Looking at desktop virtualization, but some users need 3D support. Is HP Remote Graphics a viable solution?

  - by Ryan Thompson

  My company is looking at desktop virtualization, and are planning to move all of the desktop compute resources into the server room or data center, and provide users with thin clients for access. In most cases, a simple VNC or Remote Desktop solution is adequate, but some users are running visualizations that require 3D capability--something that VNC and Remote Desktop cannot support. Rather than making an exception and providing desktop machines for these users, complicating out rollout and future operations, we are considering adding servers with GPUs, and using HP's Remote Graphics to provide access from the thin client. The demo version appears to work acceptably, but there is a bit of a learning curve, it's not clear how well it would work for multiple simultaneous sessions, and it's not clear if it would be a good solution to apply to non-3D sessions. If possible, as with the hardware, we want to deploy a single software solution instead of a mishmash. If anyone has had experience managing a large installation of HP Remote Graphics, I would appreciate any feedback you can provide.

  Read the article

• Project specific help [closed]

  - by Sushant Jain

  Hi friends, I am in final year of engineering with Information Technology branch. I have to make my final year project based on Linux/UNIX platform. But until now i couldn't find any good project idea that will be useful for my future industrial career also. So please help me if you have any good project idea related to any field in Linux that gives us a leading edge in my career. and please suggest me sources that will be helpful to me in making that project. Thanks in advance.....

  Read the article

• How to prevent these executables from starting up?

  - by TomWij

  After removing the following executables from starting up, in the near future they reappear again: DDMService.exe: Re-enabled when visiting a DivX video online. DivXUpdate.exe: Re-enabled when visiting a DivX video online. GoogleUpdate.exe: Re-enabled task, I think by Google Chrome? I see no auto-update option. iPodService.exe: Re-enables after starting iTunes. iTunesHelper.exe: Re-enables after starting iTunes, useless on SSDs. Reader_sl.exe: Re-enables when updating Adobe Reader, useless on SSDs. It bores me that these processes keep popping back up, while my software functions well without them. I'm smart enough to update the software weekly through FileHippo so I don't need automatic updates. What can I do to never see these processes again? Even after reinstallation of those applications... A general solution is also welcome! :-)

  Read the article

• How can I get data off of a damaged thumb drive?

  - by Lord Torgamus

  A guy I work with just came by to ask me about a damaged thumb drive/USB flash drive. Apparently his son dropped it on a hard surface and it won't power up anymore. They've tried plugging it into multiple machines without success, even though each port they tried was able to power other USB devices. He knows it's not a lost cause because a local tech store is offering to recover the data for $500, but he says they're not worth that much. I figured someone on SU would have an idea about this; he doesn't care about using the drive in the future, just wants to salvage a few files that would be a pain to recreate. Is this possible without advanced equipment, and if so, how? He said he already tried the advice on the Internet about typing in different drive letters and such, but that failed because there was no power going to the drive. He also said that he opened the case up at one point, but I'm not sure what, if anything, he did inside.

  Read the article

• Integrate Cognos Mobile for iPad to other iOS apps [closed]

  - by Gerardo Contijoch

  I'm developing an iPad application that will have integration with IBM Cognos in the near future. As part of that integration I have a very special requirement: It should be possible to open my application from Cognos Mobile app (the native app). Common sense tells me it's not possible to do that, since Cognos Mobile is a closed application, but it wouldn't hut to ask anyway. Is it possible to do that? What about the other way around? iOS uses URL Schemas to open apps from other apps, but as far as I know Cognos Mobile doesn't register any Url Schema to interact with it. Thank you!

  Read the article

• additional space on microsoft's cloud

  - by Narcolapser

  Question: How do you get more space on Live Mesh/Live Sync? Info: I'm looking into corporate data backs for my company's dealers. each dealership will have data back up demands ranging from 100mb to 20gb. We are an entirely Microsoft solution so when I was asked to look into back ups, of course I would look to Micro$oft. even if we have too buy this space, is there a way to get more space on Live Mesh/Live Sync (Live Mync hehe)? The 5 gb that Mesh provides or the 2gb that Sync provides isn't enough for our larger dealerships. The 25gb that SkyDrive provides is probably enough for now, but I don't know if it will be in the future. However, SkyDrive is not automatically synced. So it isn't a viable option anyway. ~n

  Read the article

• How to cleanup tmp folder safely on Linux

  - by Syncopated

  I use RAM for my tmpfs /tmp, 2GB, to be exact. Normally, this is enough but sometimes, processes create files in there and fail to cleanup after themselves. This can happen if they crash. I need to delete these orphaned tmp files or else future process will run out of space on /tmp. How can I safely garbage collect /tmp? Some people do it by checking last modification timestamp, but this approach is unsafe because there can be long-running processes that still need those files. A safer approach is to combine the last modification timestamp condition with the condition that no process has a file handle for the file. Is there a program/script/etc that embodies this approach or some other approach that is also safe? Incidentally, does Linux/Unix allow a mode of file opening with creation wherein the created file is deleted when the creating process terminates, even if it's from a crash?

  Read the article

• nginx hashing on GET parameter

  - by Sparsh Gupta

  I have two Varnish servers and I plan to add more varnish servers. I am using a nginx load balancer to divide traffic to these varnish servers. To utilize maximum RAM of each varnish server, I need that same request reaches same varnish server. Same request can be identified by one GET parameter in the request URL say 'a' In a normal code, I would do something like- (if I need to divide all traffic between 2 Varnish servers) if($arg_a % 2 == 0) { proxy_pass varnish1; } if($arg_a % 2 == 1) { proxy_pass varnish2; } This is basically doing a even / odd check on GET parameter a and then deciding which upstream pool to send the request. My question are- What is the nginx equivalent of such a code. I dont know if nginx accepts modulas Is there a better/ efficient hashing function built in with nginx (0.8.54) which I can possibly use. In future I want to add more upstream pools so I need not to change %2 to %3 %4 and so on Any other alternate way to solve this problem

  Read the article

• Can I use CAT 6a connectors with 7a cable (and get 6a performance)?

  - by Mr. Flibble

  I'm re-wiring a building and want to get the best cable possible laid - it required re-plastering to make a change to the cables and the cables will be there for the next 10 - 20 years. Currently there appears to be cat 7a cable available but not too much in the way of cat 7a connectors. Also - I won't be using 40Gig hardware in the near future. So, my question: is it possible to use cat 6a connectors / patch panels with cat 7a cable and get the same performance as I would had I used cat 6a cable? Are there any gotchas in trying to do this?

  Read the article

• remove apache tar binary package in centos

  - by user119720

  I need help in removing binary package that had been installed in my linux machine. The scenario that I am having are such as like this: I've already install latest apache that I get from its website(httpd.apache.org) through Unix binary package(tar.gz) After successfully install program,the apache server web perfectly without any issues. But then I having a thought,if there are another latest release version of apache in the future,then I need to make sure that i can upgrading current apache or reinstalling the new version apache. So my question is, how do I ensure that I have remove the old remove apache and all its dependencies so that it will not having conflict(probably) when installing the new apache. Right now the only thing that i can think of is to remove all the apache folder manually : rm -rf /apache2 Hope someone can shed some light about this.Thanks.

  Read the article

• Outlook Registry Key Damaged; Tried "Fix It" and lost everything

  - by Ray

  My outlook 2007 (on Windows 7 64 bit) worked fine for two weeks. I then installed a printer/scanner/copier and the Outlook Window wouldn't open. I went to Microsoft's website and found a page that said my registry key was damaged. The page had a link to a Fix It program. I ran the program and it looks like all my Outlook data was wiped out. Can I get the data back? For future reference, how should I protect myself if the key goes bad again? Do you think I should unistall Outlook and re-install?

  Read the article

• Xen find VBD id for physical disks

  - by Joe

  I'm starting a xen domU using xm create config.cfg. Within the config file are a number of physical block devices (LVs) which are added to the guest and can be accessed fine when it boots. However, at a point in the future I need to be able to hot unplug one of these disks using the xm block-detach command. This command, however, requires the vbd id of the device to be detached and I can't find a way to find the device id for a particular disk 'plugged in' at start up. Any help is much appreciated!

  Read the article

• Locked out by changing file permissions

  - by Valeriy

  I just locked my root account (and all other accounts if it matters) completely out of the RHEL 5.4 by changing permissions on every file to 400. Now I have "Permission denied" on any command that I try to run, including chmod itself. Any idea on how to recover? The only access I have to the server is via terminal or SSH. (If anyone cares how it happened, I was running a hardening script and one of the lines was supposed to change permission on some config files in /etc directory. It has couple of variables that had not been set, so the command essentially evaluated to chmod -R 0400 /* Ouch! This is sure a great lesson on checking the scripts even more carefully in the future but what can I do now?

  Read the article

• Using command line to connect to a wireless network with an http login

  - by Shane

  I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something. Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.

  Read the article

• How can I get a notification from my server if the mail queue stops

  - by Ash

  I am using QMail with Plesk 10 on an Apache server. Occasionally the mail queue stops processing emails - this most recently happenend when an email account got hacked and started sending hundreds of emails. We did not find out about this until a client of ours contacted to say that their emails were not being recieved, so we checked the mail queue and lo and behold the service had stopped. In future I would like to be notified when the mailqueue stops. How can I set something up so the server will run a command whenever the mailqueue stops?

  Read the article

• Data loss with roaming profiles on login on two different computers

  - by Jurriaan Pijpers

  We have a Windows server 2003 system with Active Directory and all of our users have roaming profiles. One of the users let someone login with his username and password on a different computer (2) while he was working on his own computer (1). Now when this user logs in on his own computer (1), the profile that is loaded is one that dates back many months (i think from the last time he logged on to computer 2). My suspicion is that the profile that was cached on computer 2 from many months back when this user last logged on on this computer, on logoff, synced over the newer profile on the server. so that now when he logs in, he gets this old profile. Now my questions: Is it possible to retrieve te newer profile? Is it possible to keep this from happening in the future?

  Read the article

• How do I run multiple commands on one line in Powershell?

  - by David

  In cmd prompt, you can run two commands on one line like so: ipconfig /release & ipconfig /renew When I run this command in PowerShell, I get: Ampersand not allowed. The & operator is reserved for future use Does PowerShell have an operator that allows me to quickly produce the equivalent of & in cmd prompt? Any method of running two commands in one line will do. I know that I can make a script, but I'm looking for something a little more off the cuff.

  Read the article

• How to obtain printed page count if no web-gui or driver-gui is available to show it

  - by Macgreggor at your service

  I am curious if windows print servers can keep a count of the printed pages sent to it? Can an individual PC (WinXP+)? Is there some secret command you can send it (with telnet, dos, etc)? I searched & couldn't find any questions similar to this here so lets keep this open-ended for future people who are curious. Is this more suited towards server fault? Maybe, but this is more about printers & local PC's have print servers now-a-days. Anyhow in my situation I have the following printers (yes old) I am curious on page-counts: HP Laserjet 1300 (using some kind of PC-card to LPT/Parallel adapter, then a network adapter on top of that [Netgear PS101 print server]) Canon Faxphone L80 Epson LX-300+

  Read the article

• Badwidth-Hogging Linux Server Causing Trouble

  - by BlairHippo

  We have a Linux server (2.6.28-11-generic #42-Ubuntu) that's misbehaving on a client site, gobbling up an entirely unacceptable percentage of the client's bandwidth, and we're trying to figure out what the heck it's doing. And the guy who had the sysadmin skillset has yet to be replaced. We're at a loss for what could be causing all that network traffic, and need to figure it out SOON. What log files should I be looking at to find this information? What analysis tools would you recommend for this task? Please note that I'm not looking for a tool that will allow me to analyze FUTURE traffic. The client is on the verge of shutting the machine off entirely; I need to figure out what it's been doing with the data I already have, if that's at all possible. My thanks in advance for helping a development monkey play sysadmin.

  Read the article

• Messages Disappeared from Outlook Sent Folder

  - by Bryan

  Two days ago almost all of the messages in my Microsoft Outlook sent folder disappeared. I say "almost all" because only the messages from the past 2 weeks remain. This led me to believe that they must have been "auto archived," but I can't find an archive file that contains my messages. I've checked the folder where Outlook says it archives messages, but there's not much there. I've changed my settings to prevent Outlook from auto-archiving my messages in the future, but still need the ones that have disappeared. Can anybody help me find my missing messages?

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >