Search Results

Search found 3956 results on 159 pages for 'scripting bridge'.

Page 91/159 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Can I map several physical interfaces to a single vmware vmnet interface?

  - by EricJLN

  I am using a rack mounted device that has 10 Ethernet ports built into it. For 8 of the ports, I would like to bind them to a single vwmare-server-2.0 virtual network interface, so that I can, in effect, use the ports as a hub for the external devices and internal virtual machines. How can I bridge a single vmware vmnet# interface to several physical interfaces?

  Read the article

• Losing internet connectivity on server after installing LogMeIn Hamachi (with server set as gateway node)

  - by Kim Jong-Un

  Our domain controller (SBS 2003) completely lost internet and network connectivity yesterday after I remotely installed LogMeIn Hamachi on it and set it to be a gateway node- in an attempt to create a VPN link between the server and a remote site. I had to go in to the office to resolve the problem as, unsurprisingly, my own remote access to the server was also lost. I was only able to restore network connectivity by deleting a virtual network adapter Hamachi created when making the server the gateway node (called "Hamachi bridge" I believe), then rebooting the server. This is a repeatable problem. Every time I try to get this to work, it just takes the server offline. Why would this bridge affect regular TCP/IP connectivity on the NIC in this way? I have tried a "hub-and-spoke" configuration between the server and our PC at a remote site (server set as hub, remote site as spoke). This caused no such problems with general internet connectivity, and file transfer worked well between the two computers. However, there was a DNS issue with the VPN between the two sites- resulting in Active Directory not being able to communicate between them (could not log on using domain user accounts at remote site if they were not already cached on that machine). I only tried a "gateway" network as LogMeIn support told me: If you can get the Active Directory to work it would only be through a "Gateway" network type with the server acting as the Gateway Node. You would configure the gateway settings on the server in the Hamachi client on that machine to push whatever IP's/DNS settings you prefer and at that point AD would be able (all things being equal) communicate to the client node when it attaches. We do not have any ActiveDirectory configuration info as that's outside the scope of our support. I hope this helps. It would be fantastic if I could get Active Directory to work over a Hamachi VPN connection, without worrying about the server going offline in this way. Does anyone have any ideas how I should proceed, or any theories as to what is going on when I try to use the "gateway" network type? I want to try to narrow down what is going on here.

  Read the article

• Windows (XP): redirect two serial ports

  - by booha

  I need to virtually bridge two real serial ports, i.e. COM1<-COM6 I'm not sure it can be done with com0com - can it? http://en.wikipedia.org/wiki/COM_port_redirector

  Read the article

• VMWare guest OS internet access issues

  - by Qua Phan

  My host is running Win 7 ultimate 64bit, ESET NOD32 AV 4.0 (64 bit). My guest OS is Windows XP Professional (Sp3) Using bridge mode, I can ping gateway just fine, even ping public dns server (8.8.8.8 or 208.67.222.222). But cannot resolve any dns request. I tried using nslookup with public dns, my gateway but no good. I can access my host share file normally thou. Any suggestions?

  Read the article

• Batch add/import of a list of users to a group in Active Directory?

  - by JB

  We have two lists of users (about 1000 each) that we need to add to groups in Active Directory (Windows Server 2003...one list will be in one group, one in the other). All the users currently exist in the directory, but we just need to assign them properly. Is there an easy way to do this without scripting? If not, can it be scripted with Ruby, Perl or Python? Thanks!

  Read the article

• 64-bit linux kernel only seeing 3 of 4GB after upgrade...

  - by Blaine

  Hey everyone. I am running Ubuntu 9.04 64-bit on my macbook. I had 2GB of ram before, and everything ran great. I just upgraded to 2x2GB (4GB), but my system only sees 3GB of it. OS X, which I am dual booting, sees all 4GB. Also, my video performance is incredibly lacking. Before the upgrade my compiz benchmark was full at 80fps, and now it is at 22fps with very choppy window dragging. Has anyone ever heard of this on a 64-bit kernel? I just don't quite understand what could be the issue. 10$ uname -a Linux macbook 2.6.28-15-generic #49-Ubuntu SMP Tue Aug 18 19:25:34 UTC 2009 x86_64 GNU/Linux $ free -m total used free shared buffers cached Mem: 2953 1031 1921 0 114 427 -/+ buffers/cache: 489 2463 Swap: 7812 0 7812 9$ lsmod Module Size Used by i915 77960 2 drm 123232 3 i915 binfmt_misc 18572 1 ppdev 16904 0 btusb 21784 2 bridge 63776 0 stp 11140 1 bridge bnep 22912 2 vboxnetadp 109356 0 vboxnetflt 116972 0 vboxdrv 1721612 1 vboxnetflt uvcvideo 69640 0 compat_ioctl32 18304 1 uvcvideo videodev 45184 2 uvcvideo,compat_ioctl32 v4l1_compat 23940 2 uvcvideo,videodev lp 19588 0 parport 49584 2 ppdev,lp snd_hda_intel 557492 3 snd_pcm_oss 52352 0 snd_mixer_oss 24960 1 snd_pcm_oss snd_pcm 99464 2 snd_hda_intel,snd_pcm_oss arc4 10240 2 snd_seq_dummy 11524 0 ecb 11392 2 snd_seq_oss 41984 0 snd_seq_midi 15744 0 snd_rawmidi 33920 1 snd_seq_midi snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event ath9k 310584 0 snd_timer 34064 2 snd_pcm,snd_seq snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq mac80211 251528 1 ath9k iTCO_wdt 21712 0 iTCO_vendor_support 12420 1 iTCO_wdt joydev 20992 0 video 29204 0 snd 78920 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device applesmc 37700 0 output 11648 1 video soundcore 16800 1 snd pcspkr 11136 0 cfg80211 43680 1 mac80211 appletouch 19972 0 isight_firmware 11520 0 input_polldev 12688 1 applesmc intel_agp 39408 1 snd_page_alloc 18704 2 snd_hda_intel,snd_pcm led_class 13064 2 ath9k,applesmc hid_apple 15872 0 usbhid 47040 0 ohci1394 42164 0 ieee1394 108288 1 ohci1394 sky2 63364 0 fbcon 49792 0 tileblit 11264 1 fbcon font 17024 1 fbcon bitblit 14464 1 fbcon softcursor 10368 1 bitblit Some information from dmesg: [ 795.820163] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1762.709516] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 1763.078130] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2362.760889] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 2416.352084] ACPI: EC: missing confirmations, switch off interrupt mode. [ 3718.721095] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 3719.108914] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 4318.773266] [drm:i915_getparam] *ERROR* Unknown parameter 6 [ 9513.813066] CE: hpet increasing min_delta_ns to 15000 nsec [ 9693.815684] npviewer.bin[6736]

  Read the article

• SSD and intel i5 lagging

  - by Marek Javurek

  my "new" notebook has some really wierd lags during work, youtube video etc etc... Sometimes it has bluescreen during booting, sometimes after reboot. All my drivers are updated and SSD firmware too. this is my notebook parameters: Operating System MS Windows 7 64-bit SP1 CPU Intel Core i5 @ 2.40GHz: 57 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24) Motherboard LENOVO 12985VG (CPU): 58 °C Graphics SyncMaster (1680x1050@60Hz) AMD Radeon HD 6630M Series (Lenovo) Hard Drives 125GB Crucial M4-CT128M4SSD1 ATA Device (SATA-SSD) full specs here: http://speccy.piriform.com/results/Khr265gWVgk6vKTMrhdfhlS

  Read the article

• Ubuntu asking me to upgrade to natty narwhal?

  - by Ke

  I am wondering will it affect my server if I upgrade to the latest version. Anything I should be careful about? Also, im wondering what is an intelligent way to update a ubuntu server normally. Would you update every week for instance? also would you have lots of errors to handle with scripting systems like perl/cpan modules etc, since these are always tough to install anyway with compatibility issues? Cheers, K

  Read the article

• Favorite Notepad++ plug-ins?

  - by Nikhil

  I just started using Notepad++ for simple scripting tasks. Notepad++ has a bunch of plug-ins to extend the core functionality. What are your favorite ones?

  Read the article

• Should I get integrated graphics if I already have a dedicated GPU?

  - by Ivo Flipse

  I want to upgrade my computer to the new Sandy Bridge CPU's, which features integrated graphics. However, you have to choose between two types of chipsets: H67 or P67. Now since I already own a GTX 460, so is there any added value to using the integrated graphics? Would there be a way of 'disabling' my GPU when I don't need it's additional power or would the integrated graphics simply allow me to add another screen?

  Read the article

• Passing parameters to a shell script running as a cronjob

  - by Takashi

  I am new to bash scripting (not programming in general). I am writing a bash script that will run a Python script I have written. I want to be able to do the following: Pass parameters to the bash script via the cronjob (so I can have two cron jobs) one to be run with parameter 'foobar', and the other 'foo' switch based on the parameter passed to the bash script (by switching, I mean an if/else based on the paramter passed to the bash script).

  Read the article

• Transient network dropout for Xen DomU's

  - by Stephen C

  We've got a CentOS server running a cluster of virtuals. Occasionally the cluster's internal network drops out for a minute or so ... and then comes back. The problem is somehow related to the actual network traffic, but it is not a simple load issue. (The system is generally lightly loaded, and the problem occurs irrespective of actual load.) The setup: CentOS 5.6 on Dom0, various CentOS on the DomU's Hardware - a Dell R710 with a BroadCom NextXpress 2 NIC (sigh) using the latest drivers for the NIC from BroadCom Xen configured to use network-bridge and vif-bridge Some iptable tweaks to route an unrelated port to one of the virtuals. The system has one externally visible IP address, and Dom0 runs an Apache httpd configured with a number of virtual hosts each of which reverse proxies to web servers running on the virtuals. (The virtuals have to be NAT'ed, primarily because we don't have enough allocated public IP addresses.) The symptoms: Works fine most of the time. When someone tries to UPLOAD a large file to one virtuals, the internal network drops out ... for all virtuals: The Dom0 httpd sees a network timeout talking to the backend server on the virtual and reports a 502. A previously established ssh connection from Dom0 to any of the DomU's freezes. Our monitoring shows ping failures for traffic between virtuals. The Xen consoles to the DomU's do not freeze. No log messages in any log files that I can see, on either Dom0 or the DomU's ... apart from the Dom0 httpd logs. After a minute or so, the problem clears by itself. This is 100% reproducible. What we've tried: Downloading, building and installing the latest BNX2 driver on Dom0 Turning off MSI on the NIC - adding "options bnx2 disable_msi=1" to /etc/modprobe.conf Turning off tcp segmentation offload - "ethtool -K eth0 tso off". Sacrificing a black rooster at midnight. I've exhausted all my options apart from switching to KVM ... or slaughtering more roosters. Any suggestions?

  Read the article

• Tomato VPN connect but cannot ping LAN IP

  - by David Hamilton

  I've setup TomatoVPN using these settings on the server: TAP UDP 1194 Client address pool 10.10.9.1 -10.10.9.254 LAN clients are configured with 10.10.10.x I can connect from a remote client, but pinging anything in the 10.10.10.x results in a "Destination Host Unreachable" error. Here's my client configuration script: remote x.x.x.x 1194 client dev tap0 proto udp resolv-retry infinite nobind persist-key persist-tun float ca ca.crt cert client1.crt key client1.key ns-cert-type server Any suggestions as how I can make this properly bridge the two networks?

  Read the article

• am i properly setting this up correctly? [closed]

  - by codrgii

  i'm having a problem with mod_security. I have installed it, but i am not sure on how to make the rules for it, i want the rules to prevent all major attacks like cross site scripting, remote file inclusion etc i'm using mod security 2.6.5, apache 2.2 with php 5.3.10. i went to this site http://www.gotroot.com/mod_security+rules but i am not sure how to set up the rules or which one to use, or how i add them properly in httpd.conf, would someone please explain the process and also recommend rules for someone in my position?

  Read the article

• Cobbler 2.2.2 problems

  - by Peter

  I have setup a dedicated LAN for Cobbler tests. My setup is: Cobbler server: openSUSE 12.3, cobbler 2.2.2 (from openSUSE repos) Imported distros: Centos 6.5, Red Hat 6.5, Red Hat 7.0, openSUSE 13.1 Target Machine: VMs in a Windows 7 Virtualbox Systems provisioning works OK, but I have some problems. The first one is that cobbler does not honor the "pxe_just_once: 1" setting. When the setup of the target OS is finished, after the reboot the target systems continues to PXE boot! The second problem is that the target server is not correctly configured! See my setup: cobbler system report --name=test Name : test TFTP Boot Files : {} Comment : Fetchable Files : {} Gateway : 192.168.0.1 Hostname : testcob1.example.com Image : IPv6 Autoconfiguration : False IPv6 Default Device : Kernel Options : {} Kernel Options (Post Install) : {} Kickstart : <<inherit>> Kickstart Metadata : {} LDAP Enabled : False LDAP Management Type : authconfig Management Classes : [] Management Parameters : <<inherit>> Monit Enabled : False Name Servers : ['192.168.0.1', '8.8.8.8'] Name Servers Search Path : [] Netboot Enabled : False Owners : ['admin'] Power Management Address : Power ID : Power Password : Power Management Type : ipmitool Power Username : Profile : RHEL-6.5-x86_64 Proxy : <<inherit>> Red Hat Management Key : <<inherit>> Red Hat Management Server : <<inherit>> Repos Enabled : False Server Override : <<inherit>> Status : testing Template Files : {} Virt Auto Boot : <<inherit>> Virt CPUs : <<inherit>> Virt Disk Driver Type : <<inherit>> Virt File Size(GB) : <<inherit>> Virt Path : <<inherit>> Virt RAM (MB) : <<inherit>> Virt Type : <<inherit>> Interface ===== : eth0 Bonding Opts : Bridge Opts : DHCP Tag : DNS Name : Master Interface : Interface Type : IP Address : 192.168.0.200 IPv6 Address : IPv6 Default Gateway : IPv6 MTU : IPv6 Secondaries : [] IPv6 Static Routes : [] MAC Address : Management Interface : True MTU : Subnet Mask : 255.255.255.0 Static : True Static Routes : [] Virt Bridge : So, although I have setup the hostname and the network interface of the target system, after the setup, the hostname is set to localhost.localdomain and eth0 is configured as a DHCP not static! How can I find the problem and fix it? Note that I have synced and restarted cobbler a couple of times, but the problems persists.

  Read the article

• how to use iptables to block the IP of device connected to openwrt router

  - by scola

  I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

  Read the article

• Windows server administration over web browser

  - by Andras Sebestyen

  I wonder if there is a software which can control Windows server over a browser. I know it sounds is strange however I haven't seen any and as you can do scripting with *nix system I think it could be a good one. Functions that I am after: User management Printer install msi assign I know there are many programmes including a win server but I would like to do it only one surface. Has anyone come a cross such a thing like this?

  Read the article

• Induce Mac graphical login from SSH

  - by Ben Alpert

  The title says it all. Is there a way to make the loginwindow process start a user session by running a command when remotely logged in via SSH as an admin on Mac OS X? When the machine is at the login window (no user is currently logged in), I want it to open up a user's session as if I had clicked on the username and entered a password. Solutions that don't involve scripting the GUI are highly preferred, but this Apple KB page may be of interest for those who go that route.

  Read the article

• dynamically allocating space for variable in ksh

  - by Govind Rajan

  I am new to ksh unix shell scripting.I need my ksh script to get inputs from the user. and the number of inputs is unkown. I need to get the inputs and process again further .The sample run could be : Enter the input values : Hello how are you Select two values from the above : how you Here the italized text are the inputs from the user.The inputs number given by the user is unknown .I down know how to handle the values given by user. Thanks in advance

  Read the article

• Spanning-Tree and redundant links

  - by Franko

  I have 2 switches which have redundancy between them, meaning fa0/1 on SW1 is connected to fa0/1 on SW2, and fa0/2 on SW1 is connected to fa0/2 on SW2. Both of the switches have the same BID, however the MAC address of SW1 is numerically lower, hence making it the root bridge. Now my question is, on SW2, what determines which of fa0/1 and fa0/2 becomes the RP (Root Port) and the other on blocking state?

  Read the article

• using wireless with VMWare workstation 6.5

  - by BdotA

  I am using VMWare workstation 6.5 and have installed WinXP SP2 on it. My main operation system is Win 7. when I am hard-wired, I can use internet inside vmware but when I am wireless, I cannot use internet inside vmware... I did a research and found that the network adapter should be on NAT instead of bridge, I tried that but it did not work either.

  Read the article

• FC SAN network high-error rate simulation

  - by Wieslaw Herr

  Is there a way to simulate a malfunctioning device or a faulty cable in a FC SAN network? edit: I know shutting down a port on a switch is an option, I'd like to simulate high error rates though. In an ethernet network it would be a simple case of adding a transparent bridge that discards a given percent of the packets, but I have absolutely no idea how to tackle that in an Fibre Channel environment...

  Read the article

• How do I create a bridged virtual network for libvirt+KVM+ubuntu-server the easy way?

  - by Arthur Ulfeldt

  I see lots of documentation on how to manually set up a network bridge and then manually add vm's tun devices to these bridges and then write a shell script that glues it all together. lots of work, very manual, and not impressive. On the other hand if you want to use NAT to KVM+libvirt VMs to the network you just click the new network button in the virt-manager gui and relax. Am I missing "the easy way" of causing a VM to share the physical network with the host?

  Read the article

• Move Emails from Folder to Another in outlook then delete the old folder

  - by Ahmed Al-Haffar

  Hi Scripting Guys i want to write a script to move all emails from a folder called PST Migrations to inbox then delete the PST Migrations Folder, i want to run this script on all users profiles any help please

  Read the article

• How to save a remote server SSL certificate locally as a file

  - by Kimvais

  I need to download an SSL certificate of a remote server (not HTTPS, but the SSL handshake should be the same as Google Chrome / IE / wget and curl all give certificate check fail errors) and add the certificate as trusted in my laptops Windows' certificate store since I am not able to get my IT guys to give me the CA cert. this is for office commnunicator so I cannot really use the actual client to get the cert. How do I do this, I have Windows 7 and a pile of Linuxes handy so any tool / scripting language is fine.

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >