Search Results

Search found 3006 results on 121 pages for 'shutdown hook'.

Page 91/121 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Dell XPS m1530 system cannot boot need 130w or greater

  - by KPS

  I have a Dell XPS M1530 and I lost my old AC adapter but ordered a new one. For the longest time it always had a battery charge so I was able to boot into the OS but now it is completely dead. I have a generic charger that slowly charged the laptop when it was in the OS but does not when the computer is off. When I boot up I get the following error: The AC power adapter type cannot be determined. The system can only boot with a 130 W power adapter or greater. Strike F1 key to shutdown. I cannot even enter the BIOs setup screen or boot menu, is there a way around this? I heard from the local tech that Dell has a special feature to boot from thumb drive before getting past the initial logo. I am doing my best to avoid purchasing a new charger since it worked just fine when the OS was running, I am hoping to get this thing going. Is there a way to charge the battery externally? Thanks in advance for any help!

  Read the article

• Embedding a WMV file on the web via URL in a Powerpoint presentation

  - by Dave

  I've got a situation where I want to distribute a Powerpoint presentation to several people. I want to be able to embed several large videos in this presentation by linking to a URL, for the following specific reasons: the videos are highly confidential, and I would like to be able to delete them at some later date, but still allow them to see it in the presentation while it is online. I want to send the presentation via email (so it should be small), and put the links on a server with a faster upload speed Maybe I'd like to change the video at some point without changing the presentation One option that addresses #1 is to hook up a webcam and allow them to see video stream from the office, but our upload rate is too slow for this to be a viable option. I've tried embedding a video and giving Powerpoint the URL. It seems to work initially, because the first frame appears in my slideshow. However, when I play the slideshow, nothing happens. I looked at the network traffic on my computer, and nothing was getting downloaded from the remote server. Any suggestions on how to make this work, or how to at least satisfy the criteria listed above would be great!

  Read the article

• Routing a single request through multiple nginx backend apps

  - by Jonathan Oliver

  I wanted to get an idea if anything like the following scenario was possible: Nginx handles a request and routes it to some kind of authentication application where cookies and/or other kinds of security identifiers are interpreted and verified. The app perhaps makes a few additions to the request (appending authenticated headers). Failing authentication returns an HTTP 401. Nginx then takes the request and routes it through an authorization application which determines, based upon identity and the HTTP verb (put, delete, get, etc.) and URL in question, whether the actor/agent/user has permission to performed the intended action. Perhaps the authorization application modifies the request somewhat by appending another header, for example. Failing authorization returns 403. (Wash, rinse, repeat the proxy pattern for any number of services that want to participate in the request in some fashion.) Finally, Nginx routes the request into the actual application code where the request is inspected and the requested operations are executed according to the URL in question and where the identity of the user can be captured and understood by the application by looking at the altered HTTP request. Ideally, Nginx could do this natively or with a plugin. Any ideas? The alternative that I've considered is having Nginx hand off the initial request to the authentication application and then have this application proxy the request back through to Nginx (whether on the same box or another box). I know there are a number of applications frameworks (Django, RoR, etc.) that can do a lot of this stuff "in process", but I was trying to make things a little more generic and self contained where different applications could "hook" the HTTP pipeline of Nginx and then participate in, short circuit, and even modify the request accordingly. If Nginx can't do this, is anyone aware of other web servers that will perform in the manner described above?

  Read the article

• My Linux desktop sees my HDMI-connected monitor, but my monitor says "No signal"

  - by hrunting

  I have a Gigabyte H55M-UD2H motherboard and an Acer S271HL monitor. When I connect the monitor to the motherboard via VGA, signal works perfectly. When I connect the monitor via HDMI, the system "sees" the connection, but the monitor receives no signal (the monitor shows a blue box which reads "No Signal" and then the monitor goes into power-saving state). Some fun facts about this: if I hook a different monitor to this box via HDMI, the monitor receives the output without issue (same computer/motherboard, same cable, different monitor) if I connect a different computer to the monitor via HDMI, the monitor receives the output without issue (different computer, same cable, same monitor) no signal is received whether in the OS or in the BIOS there are no BIOS options for controlling video output other than for selection of onboard vs. PCI/PCI-E-based video card (the system has no dedicated video card installed) The box is running Linux, so I have the output of xrandr which shows the connection and the monitor modes detected via DDC: ~$ xrandr --prop Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP1 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on HDMI2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm EDID: 00ffffffffffff000472ca028d128022 1c160103803c2278ca7b45a4554aa227 0b5054bfef80714f8140818081c08100 9500b300d1c0023a801871382d40582c 450056502100001e000000fd00384c1f 5311000a202020202020000000fc0053 323731484c0a202020202020000000ff 004c55573044303130383531300a01e5 020324f14f0102030405060790111213 1415161f230907078301000067030c00 1000382d023a801871382d40582c4500 56502100001f011d8018711c1620582c 250056502100009f011d007251d01e20 6e28550056502100001e8c0ad08a20e0 2d10103e960056502100001800000000 000000000000000000000000000000de Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on 1920x1080 60.0*+ 50.0 25.0 30.0 1680x1050 59.9 1680x945 60.0 1400x1050 74.9 59.9 1600x900 60.0 1280x1024 75.0 60.0 1440x900 75.0 59.9 1280x960 60.0 1366x768 60.0 1360x768 60.0 1280x800 74.9 59.9 1152x864 75.0 1280x768 74.9 60.0 1280x720 50.0 60.0 1440x576 25.0 1024x768 75.1 70.1 60.0 1440x480 30.0 1024x576 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 720x576 50.0 848x480 60.0 720x480 59.9 640x480 72.8 75.0 66.7 60.0 59.9 720x400 70.1 HDMI3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP2 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on DP3 disconnected (normal left inverted right x axis y axis) Broadcast RGB: Full supported: Full Limited 16:2 audio: auto supported: force-dvi off auto on How do I get this monitor to recognize the output from this HDMI socket?

  Read the article

• reverse proxy not rewriting to https

  - by polishpt

  I need your help. I'm having problems with reverse proxy rewriting to https: I have an alfresco app running on top of tomcat and as a front and an Apache server - it's site-enabled looks like that: <VirtualHost *:80> ServerName alfresco JkMount /* ajp13_worker <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature Off </VirtualHost> I also have a reverse proxy server running on second machine and i want it to rewrite queries to https. It's site-enabled looks like that: <VirtualHost 192.168.251.50:80> ServerName alfresco DocumentRoot /var/www/ RewriteEngine on RewriteRule (.*) https://alfresco/ [R] LogLevel warn ErrorLog /var/log/apache2/alfresco-80-error.log CustomLog /var/log/apache2/alfresco-80-access.log combined ServerSignature Off </VirtualHost> <VirtualHost 192.168.251.50:443> ServerName alfresco DocumentRoot /var/www/ SSLEngine On SSLProxyEngine On SSLCertificateFile /etc/ssl/certs/alfresco.pem SSLCertificateKeyFile /etc/ssl/private/alfresco.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://192.168.251.50:8080/alfresco ProxyPassReverse /alfresco http://192.168.251.50:8080/alfresco LogLevel warn ErrorLog /var/log/apache2/alfresco-443-error.log CustomLog /var/log/apache2/alfresco-443-access.log combined ServerSignature Off </VirtualHost> Now, ProxyPass works, when I go to alfresco/alfrsco in a browser application opens, but rewriting to https doesn't work. Plese help. Regards when I go to 192.168.251.50 Tomcat configuration page shows up. When I go to 192.268.251.50:8080 - the same as above when I go to 192.168.251.50:8080/alfresco - alfresco app page shows app when I go to alfresco/alfresco - same as above when i go to https://alfresco or https://alfresco i get an error connecting to a server

  Read the article

• Deploying workstations - best practices?

  - by V. Romanov

  Hi guys I've been researching on the subject of workstation deployment for a while, and found a ton of info and dozens different methods and tools, but no "best practice" method that doesn't lack at least one feature that i consider required for the solution to be perfect. I'm currently interested in windows workstation deployment, but if the tools can be extended to Linux, then it's an added value. I want the deployment tools I use to be able to do the following: hardware independent - I want my image or installation to have a minimum of hardware and driver dependency, so that i can use a single image/package for all workstations easily updatable - I want to be able to update my image as easily as possible without redeploying/rebuilding/reimaging all configurations PXE bootable deployment - I want the tools to be bootable off the network so that I don't need a boot cd/DOK. scriptable for minimum human input - Ideally, the tool should run automatically after being booted and perform a "default" deployment (including partitioning) unless prompted otherwise. i.e - take a pc, hook it up, power on, PXE boot and forget about it until the OS is deployed. I found no single product or environment that does all this. Closest i came to is the windows deployment services/WIM image format. I also checked out numerous imaging and deployment tools including clonezilla, ghost, g4u, wpkg and others, but most of them lack the hardware Independence and updatability features. We currently have a Symantec Ghost server setup that does imaging over the network, but I'm not satisfied with it as it has all the drawbacks i listed above. Do you have suggestions how to optimize the process of workstation deployment? How do you deploy them in your organization? Thanks! Vadim.

  Read the article

• Local SSL connections are causing redirect loop (after Ubuntu update)

  - by codeinthehole

  Following a recent Ubuntu update, my local websites are no longer serving their pages over SSL. For example, my .htaccess file attempts to ensure /sign-in is always served over HTTPS: RewriteEngine On RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} /sign-in RewriteRule (.*) https://%{HTTP_HOST}%{REQUEST_URI} [L,QSA,R=301] However when I make a request to /sign-in on the domain site2-local , I get the error "The page isn't redirecting properly" with the following in /var/log/apache2/error.log [Tue Jun 08 12:20:57 2010] [info] [client 127.0.1.1] Connection to child 0 established (server site1-local:443) [Tue Jun 08 12:20:57 2010] [info] Seeding PRNG with 656 bytes of entropy [Tue Jun 08 12:20:57 2010] [info] Initial (No.1) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.2) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.3) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.4) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.5) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.6) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.7) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.8) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.9) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:20:57 2010] [info] Subsequent (No.10) HTTPS request received for child 0 (server site2-local:443) [Tue Jun 08 12:21:12 2010] [info] [client 127.0.1.1] (70007)The timeout specified has expired: SSL input filter read failed. [Tue Jun 08 12:21:12 2010] [info] [client 127.0.1.1] Connection closed to child 0 with standard shutdown (server site2-local:443) There is a connection to site1-local (another site on my machine which shares the certificate), which I don't understand. Anyone know what is causing this issue?

  Read the article

• cloning a kvm guest os to a vmdk file

  - by Bond

  I have a production environment where I am having 4 Guest OS running on a Ubuntu server which uses kvm. These OS are in an LVM based setup.I want these Virtual Machines to be in a vmdk format also.Where people would do experiments with these Virtual Machines so this in a vmware environment (or it can be Xen too) would be different from the kvm server.I would not have any control on that other environment so I want to give people vmdk images of these virtual machines. The production Virtual Machines will still keep running on kvm server but the VMs on which experiments would be done would be of type vmdk.(vmdk is a constraint) Here is output of lvscan ACTIVE '/dev/abcd/lvm1' [100.00 GiB] inherit ACTIVE '/dev/abcd/lvm2' [150.00 GiB] inherit ACTIVE '/dev/abcd/lvm3' [50.00 GiB] inherit ACTIVE '/dev/abcd/lvm4' [100.00 GiB] inherit I was reading man page of qemu-img and what I understand is I need to first create a qcow image file which I need to populate and then convert that to a vmdk file. Is that understanding correct? Now suppose /dev/abcd/lvm4 is the virtual machine with which I am going to start this experiment.I can shutdown the production VMs for some time to do this. So is the following way correct to go on server 1 (where kvm is running) qemu-img convert -c -f raw -O vmdk /dev/abcd/lvm4 /backup/lvm4.img or it will affect the lvm4 on kvm server 1. I do not want the VM running on original server to at all loose its any of the content but also have a vmdk file for each of the Guest OS on kvm. Before I proceed with any of the above things on the production machine I just want to make sure that I am doing the correct thing so I asking here.

  Read the article

• Unix Permissions: Enable access to files no matter the user?

  - by TK Kocheran

  I've been using Linux for a long time and I still am completely in the dark about how file permissions really work. With that in mind, does anyone have any books or thorough guides I could read to really understand things completely? I've done my fair share of sysadminning, so I know the easy stuff like making directories readable and writable, making files executable, and changing the owner of a file, but on sharing files across users, I'm lost. Here's my main problem. I have a number of machines across which I intend to synchronize my music library. I've been using Unison for a while now and it's a great choice as I can easily run it over SSH on my local network which I just set up. Win-win. Up until this point, I've been synchronizing computers using a 2TB external hard drive. (computer 1 unisons to HD, computer 2 unisons to HD, etc.) This is tedious at best, especially since I encrypted the drive, making it a huge hassle to hook it up to all of my machines and sync it. Anyway, the drive is running ext4 (in TrueCrypt), so it maintains all Unix filesystem info like owners and groups. I just set up a new machine and just Unison'd it to get the music on it, and I realized that now, all of my permissions are fubar. I had to run Unison as root since that was the only way I could get the files to come off of the external drive. Apparently, since I'm using a different user name on this machine than my usual "rfkrocktk" across all machines, this essentially throws a huge wrench in the gears. Here's my use case. This laptop has two effective users, "leandra" and "rfkrocktk". I want to share music between these two users, so I symlinked /home/rfkrocktk/Music to point to /home/leandra/Music. How do I (a) allow both users access to read/write/delete files in this folder, and (b) keep everything nicely in sync without messing up file ownership?

  Read the article

• How can I run Gnome or KDE locally in Cygwin?

  - by John Peter Thompson Garcés

  Apparently it is possible to do this using cygwin ports, as can be seen in screenshots. I followed this how-to to get apt-cygports set up, and I used it to install gnome-session. This how-to supposedly gives the commands needed to run Gnome or KDE, but whenever I try to run Gnome, a blank X-window pops up and then quickly disappears. Here is the terminal output: $ startx /usr/bin/dbus-launch gnome-session xauth: file /home/jpthomps/.serverauth.4168 does not exist Welcome to the XWin X Server Vendor: The Cygwin/X Project Release: 1.10.3.0 OS: Windows 7 Service Pack 1 [Windows NT 6.1 build 7601] (WoW64) Package: version 1.10.3-12 built 2011-08-22 XWin was started with the following command line: /usr/bin/X :0 -auth /home/jpthomps/.serverauth.4168 (II) xorg.conf is not supported (II) See http://x.cygwin.com/docs/faq/cygwin-x-faq.html for more information LoadPreferences: /home/jpthomps/.XWinrc not found LoadPreferences: Loading /etc/X11/system.XWinrc LoadPreferences: Done parsing the configuration file... winDetectSupportedEngines - DirectDraw installed, allowing ShadowDD winDetectSupportedEngines - Windows NT, allowing PrimaryDD winDetectSupportedEngines - DirectDraw4 installed, allowing ShadowDDNL winDetectSupportedEngines - Returning, supported engines 0000001f winSetEngine - Using Shadow DirectDraw NonLocking winScreenInit - Using Windows display depth of 32 bits per pixel winFinishScreenInitFB - Masks: 00ff0000 0000ff00 000000ff Screen 0 added at virtual desktop coordinate (0,0). MIT-SHM extension disabled due to lack of kernel support XFree86-Bigfont extension local-client optimization disabled due to lack of shared memory support in the kernel (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 winPointerWarpCursor - Discarding first warp: 637 478 (--) 5 mouse buttons found (--) Setting autorepeat to delay=500, rate=31 (--) Windows keyboard layout: "00000409" (00000409) "US", type 4 (--) Found matching XKB configuration "English (USA)" (--) Model = "pc105" Layout = "us" Variant = "none" Options = "none" Rules = "base" Model = "pc105" Layout = "us" Variant = "none" Options = "none" winBlockHandler - pthread_mutex_unlock() winProcEstablishConnection - winInitClipboard returned. winClipboardProc - DISPLAY=:0.0 winClipboardProc - XOpenDisplay () returned and successfully opened the display. xinit: XFree86_VT property unexpectedly has 0 items instead of 1 xinit: connection to X server lost waiting for X server to shut down winClipboardProc - winClipboardFlushWindowsMessageQueue trapped WM_QUIT message, exiting main loop. winClipboardProc - XDestroyWindow succeeded. winClipboardProc - Clipboard disabled - Exit from server winDeinitMultiWindowWM - Noting shutdown in progress

  Read the article

• Cacti is ignoring hash marks in interface aliases

  - by Matt Simmons

  I'm attempting to set up Cacti to monitor a router's interfaces, and I'm having trouble getting the graph templates to show the information that I'd like. Our interface configuration looks like this: interface GigabitEthernet3/6 description WalljackNumber # Server info no ip address no shutdown switchport switchport access vlan 116 switchport mode access ip dhcp snooping trust spanning-tree portfast The "Server Info" string is really just the machine name, and a short relevant description, such as "PolarSprings vmnic2". The important part appears to be that it follows the hashmark. When I run snmpwalk, I get the proper output: IF-MIB::ifAlias.230 = STRING: WalljackNumber # Server info But in Cacti, when I go into the graph templates and set the title to this: |host_description| - Traffic - |query_ifName| (|query_ifAlias|) All that shows up in the graph is: switchname - Traffic - Gi3/6 (WalljackNumber #) Which strikes me as a little weird. What I suppose MAY be happening is that somewhere in the cacti stream, it's interpreting # as being a comment and stripping everything after, but I'm not sure. I was hoping someone could tell me that this was a known documented behavior, or that I could change it in a setting that I wasn't aware of. The alternative answer is to change the delimiter from # to something else, but I've got over a thousand lit switchports on an old college infrastructure, and I'm not sure what else might be relying on them.

  Read the article

• Ubuntu Server mdadm drbd ocfs2 kvm hangs under heavy file reading

  - by Stefano Annese

  I have deployed four ubuntu 10.04 server. They are coupled two by two in a cluster scenario. on both sides we have software raid1 disks, drbd8 and OCFS2 and on top of it some kvm machines run with qcow2 disks. I followed this: Link corosync is just used for DRBD and OCFS, the kvm machines are run "manually" When it works is fine: good performances, good I/O, but at a given time one of the two cluster started hanging. Then we tried with just one server turned on and it hangs the same. It seems to happen when an heavy READ in one of the virtual machines occurs, that is during rsyn backup. When the fact occurs the virtual machines are not reachable any more and the real server responds with good delay to the ping but no screen and no ssh is available. All we can do is force shutdown (hold the button) and restart and when it turns on again the raid on which relay drbd is resyncing. All the time it hangs we see such fact. After a couple of week of pain on one side this morning also the other cluster hung, but it has different moteherboard, ram, kvm instances. What is similar is reading for rsync scenario and Western Digital RAID Edistion disks on both side. Can anybody give me some input to solve such issue?

  Read the article

• Upstart: cannot run as root

  - by Ronni Egeriis

  I have made this upstart script, which starts a Node.js service. But all of the sudden the service has stopped, and upstart has failed to restart it. Now that I am trying to start it manually, it fails to recognize my service: start: Unknown job: queue The script is properly placed in /etc/init, and should have the correct rights: -rw-r--r-- 1 root root 200 Aug 7 13:30 queue.conf When I check the config file with init-checkconf however, it says that it is not able to run as root: root@production1:~# init-checkconf /etc/init/queue.conf ERROR: cannot run as root What causes this error and how do I solve it? Debug info: Ubuntu 12.04.3 LTS root@production1:~# service --version service ver. 0.91-ubuntu1 Edit Here's queue.conf: description "Echo.it command queue" author "Ronni Egeriis Persson <[email protected]>" stop on shutdown respawn respawn 20 5 exec sudo -u beanstalk /usr/bin/node /var/www/queue/index.js >> /var/log/queue.log 2>&1 The command sudo -u beanstalk /usr/bin/node /var/www/queue/index.js >> /var/log/queue.log 2>&1 works fine when run manually.

  Read the article

• Apahe configuration with virtual hosts and SSL on a local network

  - by Petah

  I'm trying to setup my local Apache configuration like so: http://localhost/ should serve ~/ http://development.somedomain.co.nz/ should serve ~/sites/development.somedomain.co.nz/ https://development.assldomain.co.nz/ should serve ~/sites/development.assldomain.co.nz/ I only want to allow connections from our local network (192.168.1.* range) and myself (127.0.0.1). I have setup my hosts file with: 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 development.somedomain.co.nz 127.0.0.1 development.assldomain.co.nz 127.0.0.1 development.anunuseddomain.co.nz My Apache configuration looks like: Listen 80 NameVirtualHost *:80 <VirtualHost development.somedomain.co.nz:80> ServerName development.somedomain.co.nz DocumentRoot "~/sites/development.somedomain.co.nz" DirectoryIndex index.php <Directory ~/sites/development.somedomain.co.nz> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost localhost:80> DocumentRoot "~/" ServerName localhost <Directory "~/"> Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> <IfModule mod_ssl.c> Listen *:443 NameVirtualHost *:443 AcceptMutex flock <VirtualHost development.assldomain.co.nz:443> ServerName development.assldomain.co.nz DocumentRoot "~/sites/development.assldomain.co.nz" DirectoryIndex index.php SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL SSLCertificateFile /Applications/XAMPP/etc/ssl.crt/server.crt SSLCertificateKeyFile /Applications/XAMPP/etc/ssl.key/server.key BrowserMatch ".*MSIE.*" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 <Directory ~/sites/development.assldomain.co.nz> SSLRequireSSL Options Indexes FollowSymLinks ExecCGI Includes AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> </IfModule> http://development.somedomain.co.nz/ http://localhost/ and https://development.assldomain.co.nz/ work fine. The problem is when I request http://development.anunuseddomain.co.nz/ or http://development.assldomain.co.nz/ it responds with the same as http://development.somedomain.co.nz/ I want it to deny all requests that do not match a virtual host server name and all requests to a https host that are requested with http PS I'm running XAMPP on Mac OS X 10.5.8

  Read the article

• How to prevent samba from holding a file lock after a client disconnects?

  - by Jean-Francois Chevrette

  Here I have a Samba server (Debian 5.0) thats is configured to host Windows XP profiles. Clients connects to this server and work on their profiles directly on the samba share (the profile is not copied locally). Every now and then, a client may not shutdown properly and thus Windows does not free the file locks. When looking at the samba locking table, we can see that many files are still locked even though the client is not connected anymore. In our case, this seems to occur with lockfiles created by Mozilla Thunderbird and Firefox. Here's an example of the samba locking table: # smbstatus -L | grep DENY_ALL | head -n5 Pid Uid DenyMode Access R/W Oplock SharePath Name Time -------------------------------------------------------------------------------------------------- 15494 10345 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user1 app.profile/user1.thunderbird/parent.lock Mon Nov 22 07:12:45 2010 18040 10454 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user2 app.profile/user2.thunderbird/parent.lock Mon Nov 22 11:20:45 2010 26466 10056 DENY_ALL 0x3019f RDWR EXCLUSIVE+BATCH /home/CORP/user3 app.profile/user3.firefox/parent.lock Mon Nov 22 08:48:23 2010 We can see that the files were opened by Windows and imposed a DENY_ALL lock. Now when a client reconnects to this share and tries to open those files, samba says that they are locked and denies access. Is there any way to work around this situation or am I missing something? Edit: We would like to avoid disabling file locks on the samba server because there are good reasons to have those enabled.

  Read the article

• IPTables configuration for Localhost

  - by Gabe Mc

  I have a problem in connecting a JIRA instance running on a cloud server to an instance of MySQL running on the same box. I have configured it previously using quite a few iptables rules, but it seems overly broad/terribly inprecise. I want access to several of localhosts ports from the local machine, but deny it from all other accounts. Currently, my /etc/iptables.rules file looks like: *filter :INPUT DROP [223:17779] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [10161:1120819] # SSH Access -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -i eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT # Apache2 Access for connecting to Tomcat on port 8080 -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT # MySQL -I INPUT -i lo -p tcp -m tcp --dport mysql -j ACCEPT COMMIT However, this doesn't allow me to log in when I try logging in; it just hangs on: #> mysql -u root -p -h 127.0.0.1 The Tomcat servlet container starts throwing all kinds of exceptions, as well. This is a more general problem, as I need to enable things like accessing the shutdown port for the Tomcat container, but I need to at least get the MySQL part ironed out first, without the ugliness I was originally trying. Thanks.

  Read the article

• Restore passwd for root on a server

  - by s.mihai

  Hello,       I have a DVR server with linux embeded. It has some telnet functions but i don't have the password for it (the chinese manufacturer refuses to give me the password). I did get a upgrade folder from them and found a passwd file inside.       So i assume that when i upgrade the firmware the password in that file will be used.       Now i am trying to modify the file so taht i can insert a password i already know.       The problem is that i don't know how to create the password hash from what i figured the password hash is $1$1/lfbDKX$Hmd.FqzB8IZEohPesYi961       The file is named rom.ko and i found a command telnetd /mnt/yaffs/web/boa -c /mnt/yaffs/web & /bin/cp -f /mnt/yaffs/rom.ko /etc/shadow in a script file so i assume this is the right way.       Can you help me reconstruct a password that i know already? Tell me how or make one for me :) ?... passwd file: root:$1$1/lfbDKX$Hmd.FqzB8IZEohPesYi961:0:0:99999:7:-1:-1:33637592 bin::10897:0:99999:7::: daemon::10897:0:99999:7::: adm::10897:0:99999:7::: lp::10897:0:99999:7::: sync::10897:0:99999:7::: shutdown::10897:0:99999:7::: halt::10897:0:99999:7::: mail::10897:0:99999:7::: news::10897:0:99999:7::: uucp::10897:0:99999:7::: operator::10897:0:99999:7::: games::10897:0:99999:7::: gopher::10897:0:99999:7::: ftp::10897:0:99999:7::: nobody::10897:0:99999:7::: next::11702:0:99999:7:::

  Read the article

• 2008 Sever Randomly reboots.

  - by Jeff

  I'm out of ideas here. We have a 2008 Server that keeps rebooting 2-3 times a day at completely random times with an "Unexpected Shutdown" event. There are no Dumps, no events leading to it just like it loses power then comes back online. I ran a Diagnostic of the power supply and it has had continuous power for months. In addition, the temperature of the processors are maxing out at 40 degrees Celsius. Anyone have any ideas how to figure out why this is restarting all the time? This is a DMZed Web server so it doesn't do too much process wise. Here are the specs: Host Name: ~~~ OS Name: Microsoft Windows Server 2008 R2 Standard OS Version: 6.1.7600 N/A Build 7600 OS Manufacturer: Microsoft Corporation OS Configuration: Standalone Server OS Build Type: Multiprocessor Free Registered Owner: Windows User Registered Organization: Product ID: ~~~ Original Install Date: 5/27/2010, 4:25:47 PM System Boot Time: 2/14/2011, 5:35:01 PM System Manufacturer: HP System Model: ProLiant DL380 G6 System Type: x64-based PC Processor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 26 Stepping 5 GenuineIntel ~1586 Mhz BIOS Version: HP P62, 8/16/2010 Windows Directory: C:\Windows System Directory: C:\Windows\system32 Boot Device: \Device\HarddiskVolume1 System Locale: en-us;English (United States) Input Locale: en-us;English (United States) Time Zone: (UTC-05:00) Eastern Time (US & Canada) Total Physical Memory: 4,086 MB Available Physical Memory: 2,775 MB Virtual Memory: Max Size: 8,170 MB Virtual Memory: Available: 6,691 MB Virtual Memory: In Use: 1,479 MB Page File Location(s): C:\pagefile.sys

  Read the article

• How to set up the jdbc driver to connect to hsqldb from libreoffice?

  - by rumtscho

  I am trying to "split" a LibreOffice .odb file into a HSQL database and an OpenOffice document containing forms and macros. I am trying to follow the instructions from this thread: Within a few minutes you can convert your embedded HSQLDB to a stand-alone HSQLDB which is just a very fine database engine. 1) Download and extract the current version from http://hsqldb.org/ and point the Java class path in ToolsOptionsJava to the new hsqldb.jar 2) Extract the database folder from your embedded database and rename the files data, properties, script to name.data name.properties, name.script where "name." is an arbitrary name prefix. 3) Connect a Base document to an existing JDBC database such as jdbc:hsqldb:file:/home/chenier/hsqldb/name;default_schema=true;shutdown=true;hsqldb.default_table_type=cached;get_column_name=false (again, "name" refers to your own file name prefix). This local single-user connection gives you much more than the embedded HSQLDB. 4) Copy queries, forms and reports from the old database over to the new one. The wizard presents me with a window expecting two inputs: a "Datasource URL" and a "JDBC driver class". As far as I can tell, the tutorial above only tells me what to put into the Datasource URL. As for the JDBC driver class, I have no idea what to write into this field. I tried the fully-qualified name of the Java class, org.hsqldb.jdbc.JDBCDriver as given in the HSQLDB documentation. When that failed, I tried the physical path /var/lib/hsqldb/lib/hsqldb.jar (although that should have been unnecessary, because first I pointed to this path as described under 1 and then restarted LibreOffice). In both cases, "Test class" failed with the message "The JDBC driver could not be loaded". OpenOffice's documentation doesn't say anything sensible about the field, it was something like "enter the JDBC driver in this box". Any ideas what I should enter there to get the connection working?

  Read the article

• Best way to attach 96 tb to workstation

  - by user994179

  I'm running a workstation with dual xeon 5690's (12 physical/24 logical cores), 192 gb of ram (ie, maxed-out), Windows 7 64bit, 5 slots for adapter cards, and 1 tb of internal storage, with 5 more internal bays available. I have an app that creates data files totaling about 88 tbs. These are written once every 14 months, and the rest of the time the app only needs to read them; and 95% of the reads are sequential reads of huge chunks of data. I have some control over how big the individual files are, but ideally they would be between 5 and 8 tbs. The app will be reading from only one drive at a time, and the nature of the data is such that if (when) a drive dies I can restore the data to a new disk from tape. While it would be nice to be able to use the fastest drive/controllers available, at this point size matters more than speed. After doing lots of reading, I am leaning toward buying a bunch of cheap 2tb drives and putting them into a bunch of cheap enclosures. All this stuff is going into my home office, so I need to avoid the raised floor/refrigerated approach. My questions: Is the cheap drive/enclosure solution the best one for this situation? Given the nature of the app and the way the data is used, does RAID make sense? If so, which one? For huge sequential reads, would Usb 3.0 and eSata be a wash performance-wise? For each slot available on the workstation, can I hook up an enclosure that can hold multiple drives? Or is it one controller per drive? If I can have multiple drives on one controller, am I essentially splitting the bandwidth (throughput)? For example, if I have a 12 bay enclosure, is the throughput of the controller reduced by a factor of 12? Are there any Windows 7 volume/drive/capacity limits I should be aware of? Thanks

  Read the article

• Somewhat powerful server needed for computationally expensive stuff

  - by Dane Larsen

  So here's my problem. My Dad runs a company that does some rather computationally expensive stuff. This is not supercomputer level stuff, but it does take several hours to run the average job on his Core i7 desktop. He asked me to look into a way to have his customers use the code on an hourly basis, namely via a server. Ideally he'd be able to buy a box for about $1000, and hook it right up to our home connection. Unfortunately, the data that needs to be both sent and received is on the order of several hundred megs. We live in a rural area, and the fastest connection offered is 1.5Mbit/s. Download. It's like .3Mbit/s upload. Not workable. What are the options for this kind of thing? Ideally, we'd have about 2GB of ram, 300-500GB of storage, and a nice dual core, and it has to run some flavor of Linux. Any suggestions? Thanks in advance EDIT: Also, ideally the monthly price would be < $100 per month.

  Read the article

• CHKDSK is unable to fix NTFS errors

  - by HackToHell

  After my PC shutdown due to power failure, I noticed several errors in EventViewer. The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2. and The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:. So I forced a chkdsk check at startup, and it finds a stream of error, here is the output, it is smaller than the actual log, because, Event Viewer only seems to have this much, the same line was repeated thousands of times.Here is that line. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x198f2 is already in use. Deleting corrupt attribute record (128, "") from file record segment 104690. Attribute record of type 0x80 and instance tag 0x0 is cross linked Also, even after running CHKDSK, the same errors were being reported again so I ran CHKDSK another time and it still loops the same line above, without fixing the error. Can anyone tell me how to fix it?

  Read the article

• Xen domU passwd file overwritten with console log output

  - by malfy

  I was setting up a Debian Xen domU and after booting it fine, I added basic configuration to /etc/network/interfaces and ran /etc/init.d/networking restart. This failed so I decided to reboot. After the reboot I also ran xm shutdown box. When dropped to a shell prompt it wouldn't let me login. Upon further inspection, I now have garbage in some critical files in /etc: root@box:/# tail +1 mnt/etc/{passwd-,shadow} tail: cannot open `+1' for reading: No such file or directory ==> mnt/etc/passwd- <== 0000000000100000 (reserved) Nov 23 02:02:39 box kernel: [ 0.000000] Xen: 0000000000100000 - 0000000004000000 (usable) Nov 23 02:02:39 box kernel: [ 0.000000] DMI not present or invalid. Nov 23 02:02:39 box kernel: [ 0.000000] last_pfn = 0x4000 max_arch_pfn = 0x1000000 Nov 23 02:02:39 box kernel: [ 0.000000] initial memory mapped : 0 - 033ff000 Nov 23 02:02:39 box kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000004000000 Nov 23 02:02:39 box kernel: [ 0.000000] NX (Execute Disable) protection: active Nov 23 02:02:39 box kernel: [ 0.000000] 0000000000 - 0004000000 page 4k Nov 23 02:02:39 box kernel: [ 0.000000] kernel direct mapping tables up to 4000000 @ 7000-2c000 Nov 23 02:02:3 ==> mnt/etc/shadow <== 32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 Nov 23 02:02:39 box kernel: [ 0.000000] PERCPU: Embedded 15 pages/cpu @c15b0000 s37688 r0 d23752 u65536 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: [0] 0 Nov 23 02:02:39 box kernel: [ 0.000000] Xen: using vcpu_info placement Nov 23 02:02:39 box kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16160 Nov 23 02:02:39 box kernel: [ 0.000000] Kernel command line: root=/dev/mapper/xen-guest_root ro quiet root=/dev/xvda1 ro Nov 23 02:02:39 box kernel: [ 0.000000] PID hash table entries: The garbage is also present in the passwd file and the group file (although I didn't paste that above since I have since ran debootstrap on the filesystem again). Does anyone have any insight into what happened and why?

  Read the article

• Apache fails to start after WHM easyapache update

  - by Vigrond

  Tryin to get some light shed on this issue Running CentOS I upgraded Apache using easyapache to 2.2 All was well I then used WHM to update Mysql to 5.5 This succeeded but now Apache will not start. The error log was reporting things like [Sun Apr 15 00:44:57 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [notice] suEXEC mechanism enabled (wrapper: /usr/local/apache/bin/suexec) [Sun Apr 15 02:27:30 2012] [warn] pid file /usr/local/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [alert] getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive [Sun Apr 15 02:27:30 2012] [notice] Apache/2.2.22 (Unix) mod_ssl/2.2.22 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 configured -- resuming normal operations [Sun Apr 15 02:27:30 2012] [alert] Child 4063 returned a Fatal error... Apache is exiting! So I tried to recompile using easyapache again, but easyapache just hangs I tried with base php settings - and it always gets stuck on "bf804000-bf819000 rw-p 7ffffffe9000 00:00 0 [stack]" At this point in cpanel the status says "create srm.conf and access.conf for mod_frontpage" I have tried things like rpm --rebuilddb yum clean all yum update with no luck. I'm kind of running out of ideas, and wondering if anyone could point me to the right direction.

  Read the article

• Libvirt / QEmu Machine Fails and Refuses Restart Because of Memory Allocation Errors

  - by Elmar Weber

  I'm having a problem with libvirt. On a system restart all virtual machines (VMs) are started without a problem and keep running. Then at some point in time a set of machines shuts down according to their log. When I try to restart the machine, I'm getting an error that the memory allocation failed, although more than enough memory is free. server ~ # free total used free shared buffers cached Mem: 16176648 16025476 151172 0 285432 950300 -/+ buffers/cache: 14789744 1386904 Swap: 0 0 0 server ~ # virsh start zimbra error: Failed to start domain zimbra error: Unable to read from monitor: Connection reset by peer server ~ # tail -n 4 /var/log/libvirt/qemu/zimbra.log LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 3072 -smp 2,sockets=2,cores=1,threads=1 -name zimbra -uuid d05ddb7a-83c4-a77b-d8bc-a322648520cf -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/zimbra.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/zimbra.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -netdev tap,fd=19,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:21:a9:ad,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 192.168.1.2:25 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/2 Failed to allocate 3221225472 B: Cannot allocate memory 2012-07-06 08:42:56.076+0000: shutting down server ~ # uname -a Linux server 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The system is a Ubuntu 12.04 server. The problem seems to occurs since the last restart, which was due to a number of package upgrades and a kernel upgrade. I tried booting with the previous kernel, the problem persists. I was not able to pinpoint an exact event when the machines fail, they do it at nearly the same time. The last time a duplicity job was running, this was not always the case however. Any suggestions on how to debug this? Best regards, elm

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >