Search Results

Search found 16499 results on 660 pages for 'off rhoden'.

Page 92/660 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Auto switching between wired and wireless connections

    - by Joe
    How about this situation. Our business deals a lot with medical information. And some of our clients have demands based off HIPPA, etc. There is one now where they do not want an employee to have both wired and wireless on at same time. If the wireless is on the wired needs to be turned off automatically and vice versa. However, this can not be up to the end user to manage! I have looked for third party applications and only have found http://www.wirelessautoswitch.com Does anyone know of anything else that is out there? Or possible something that can be done via group policy, etc.?

    Read the article

  • Output to TV only works if monitor is plugged in

    - by Greg Sansom
    I am trying to use my TV as the sole output for a computer. The computer has a graphics card with 2 outputs - one RGB and one DVI. I have the RGB output going to the TV, and when the DVI output is connected to a monitor, display works fine on both the monitor and the TV. If I turn off the monitor, or even turn off power to the monitor, the TV continues to display the desktop. If I unplug the DVI cable from the monitor (remember that the monitor doesn't have any power at this point), the TV stops presenting the desktop and displays a "Not Accepted" message. When starting up the computer, the TV displays fine, but stops working at the "press ctrl-alt-delete" screen unless the monitor is connected. How can I make the TV show the display without the monitor? The TV is an LG RT-42PZ45V. The graphics card is an ATI Radeon series HD4350 512MB GDDR2. The computer is running Windows Server 2008 r2.

    Read the article

  • PSU failing or Mainboard failing?

    - by Andrei Rinea
    I am having some troubles lately powering on my desktop workstation. While starting up the PC after being off for hours (usually at least 8 hours) it randomly fails to do so. What happens is that : I press the power button; nothing happens I can hear a moderate buzzing noise at the back of the PC (near the PSU); but I can't say for sure that it's not from the mainboard. If I insist pressing the power button a few times in 1-2 minutes it'll start Another route would be that instead of (3) I will plug off the power cable from the PSU and wait for 30 seconds. Then I will press the power on and keep it for 30-60 seconds (I had some success at notebooks with a similar approach). Then I will plug back the cable in the PSU, press only once the power button and it will start normally. Also while running normally I keep hearing some low buzzing which seems to be fan-RPM-related (i.e. when processing images or doing CPU intensive work). What should I look into? UPDATE It's getting worse. It took more than 10 retries today and almost 20 minutes to start the computer. I tried the paperclip trick and the PSU behaves perfectly. I managed to start the computer like so : I pressed the on-button a few times and then left the PC in a pre-startup state (the fans were working the buzzing noise was strong and I went to eat. I thought I won't lit the house on fire so fast and without smelling. Back, after 10-15 min the computer booted up! Discussed with a fellow at Intel and he told me the capacitors on the mainboard are probably a bit shot. If they are shot, he said, it should start up warm perfectly. So I did restart it, warm, a few times (5 sec cooldown and then 40 sec cooldown and it started up perfectly). I can either replace the capacitors on the mainboard (doesn't sound worth it or replace the mainboard (this one sucks too :)) ) FINAL INFO : It was the PSU after all. Although it was powering the IDEs and SATAs the Mainboard power module was failing. I bought another mainboard just to find out that this wasn't the cause. Now I'll have to return it somehow. The spare PSU is now in the computer and doing well.. Although larger (500W), it's like a plane taking off.. I need a better one.

    Read the article

  • Ubuntu 12.04 Precise on Dell Inspirion Duo

    - by Roman M. Kos
    I installed 12.04 version of Ubuntu on my Dell Inspiron Duo. After installing with help of program like UNetBootIn or smth like that. ( Besides i have no problem with kernel panic on chargin on/off like in 11.10. ) After that i followed with steps from here, in the first post here: http://ubuntuforums.org/showthread.php?t=1658635 There left one big problem with touchscreen: When i whant to drag with touchscreen like i`m doing it with mouse (for ex. selecting multile files with mouse) the selectable rectangular doesnot shows while im dragging, when dragging was finished (i put my finger off) it shows the rectangular and hides it. This thing disables all my tries to drag a window or smth else.... Also some time after using touchscreen such things are disabeling: - Often - click from a mouse (after keyboard using functinality restores) - less often - mouse movement disables (sometimes restores sometimes not) - lesser than other - keyboards works but no sygnals accepting (keyoards has indicator, so thay react, mouse of course not) The test from eTouchU utility passes perfeclty. Any idia for solving this problem? P.S.: Im from Ukraine, so sorry if my possible grammar mistakes. P.P.S.: Besides how to know the physicall position of my tabled mode? For automaticall rotating. Like on each rotation do some script.

    Read the article

  • Linksys WiFi usb dongle and linux woes

    - by MrStatic
    I have a Linksys WUSB54GC usb dongle and I have exhausted every thing I know about making this thing work in linux. I am using Fedora 13. Since it is not ready I can not view any networks. Any ideas would be great. tail of the system log Jun 2 20:14:35 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 8 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device found, idVendor=1737, idProduct=0077 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 2 20:14:35 localhost kernel: usb 1-7: Product: 802.11 g WLAN Jun 2 20:14:35 localhost kernel: usb 1-7: Manufacturer: Ralink Jun 2 20:14:35 localhost kernel: usb 1-7: SerialNumber: 1.0 Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::radio Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::assoc Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::quality Jun 2 20:14:35 localhost NetworkManager[1367]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/ieee80211/phy3/rfkill3) (driver <unknown>) Jun 2 20:14:35 localhost kernel: rt2800usb 1-7:1.0: firmware: requesting rt2870.bin Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2800usb' ifindex: 6) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4 Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): now managed Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): bringing up device. Jun 2 20:14:35 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): preparing device. Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): deactivating device (reason: 2). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): supplicant interface state: starting -> ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 2 -> 3 (reason 42) [root@localhost log]# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg Mode:Managed Access Point: Not-Associated Tx-Power=8 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on

    Read the article

  • Cannot activate num pad at all

    - by ubuntico
    I have two accounts on the same machine. Num pad on one account it working normally e.g. I can turn it ON/OFF via NumLock button. The num pad on the other account on this machine stopped working. I cannot turn it on and the buttons work as the NumLock is turned off. This happened without me touching any setting or all. It just happened and now I cannot turn them on no matter what I try. I tried via console command numlockx on - did not help. Tried via UI setting - did not help either. Updated the system from 11.10 to 12.04, did not help either. I really do not know what to do except I make a clean reinstallation of the system which would take 2 days away from me. It's obviously the problem in this account only, as num pad works in the other account. Anyone with a good suggestion?

    Read the article

  • Compiling GCC or Clang for thumb drive on OSX

    - by user105524
    I have a mac book that I don't have admin rights to which I would like to be able to use either GCC or clang. Since I lack admin right I can't install binutils or a compiler to /usr directory. My plan is to install both of these (using an old macbook that I do have admin rights for) to a flash drive and then run the compiler off of there. How would one go building gcc or clang so that it could run just off of a thumb drive? I've tried both but haven't had any success. I've tried doing it defining as many of the directories as possible through configure, but haven't been able to successfully build. My current configure script for gcc-4.8.1 is (where USB20D is the thumb drive): ../gcc-4.8.1/configure --prefix=/Volumes/USB20FD/usr \ --with-local-prefix=/Volumes/USB20FD/usr/local \ --with-native-system-header-dir=/Volumes/USB20FD/usr/include \ --with-as=/Volumes/USB20FD/usr/bin/as \ --enable-languages=c,c++,fortran\ --with-ld=/Volumes/USB20FD/usr/bin/ld \ --with-build-time-tools=/Volumes/USB20FD/usr/bin \ AR=/Volumes/USB20FD/usr/bin/ar \ AS=/Volumes/USB20FD/usr/bin/as \ RANLIB=/Volumes/USB20FD/usr/bin/ranlib \ LD=/Volumes/USB20FD/usr/bin/ld \ NM=/Volumes/USB20FD/usr/bin/nm \ LIPO=/Volumes/USB20FD/usr/bin/lipo \ AR_FOR_TARGET=/Volumes/USB20FD/usr/bin/ar \ AS_FOR_TARGET=/Volumes/USB20FD/usr/bin/as \ RANLIB_FOR_TARGET=/Volumes/USB20FD/usr/bin/ranlib \ LD_FOR_TARGET=/Volumes/USB20FD/usr/bin/ld \ NM_FOR_TARGET=/Volumes/USB20FD/usr/bin/nm \ LIPO_FOR_TARGET=/Volumes/USB20FD/usr/bin/lipo CFLAGS=" -nodefaultlibs -nostdlib -B/Volumes/USB20FD/bin -isystem/Volumes/USB20FD/usr/include -static-libgcc -v -L/Volumes/USB20FD/usr/lib " \ LDFLAGS=" -Z -lc -nodefaultlibs -nostdlib -L/Volumes/USB20FD/usr/lib -lgcc -syslibroot /Volumes/USB20FD/usr/lib/crt1.10.6.o " Any obvious ideas of which of these options need to be turned on to install the appropriate files on the thumb drive during installation? What other magic occurs during xcode installation which isn't occurring here? Thanks for any suggestions

    Read the article

  • How do you get past the Analysis to Paralysis when working on a new project?

    - by Cape Cod Gunny
    I've been struggling with how to get my project going. I've got an old software package that is in need of desparate rewrite. I haven't compiled the source code since 2004. It still sells, it's stable but does require the “Run this program in compatibility mode for:” on a lot of the newer windows systems. It's also one of those hard coded 640 X 480 screen resolution programs. Yuck! I can't seem to get started with this rewrite. I'm constantly fiddling around with different things. I'll play around with different fluid layouts for a while. Then I start looking around at how the main menu should work/look. I quickly find out that there's this thing called "Cool Bars" and I'll spend hours playing with that. Then I start thinking about stuff like "Oh I need to make sure that the screen sizes are preserved so when the application gets relaunched it remebers how the screens were positioned." Which leads to what happens if they have two monitors? Which leads to what happens if they have a quad screen? Yikes it's got to stop. I have always been a slow starter. I think about stuff long and hard up front. This has always plagued me. Once I get my mind made up then bam... I'm off and running. I'm looking for advice from some other one-person software companies that can help someone like me get off to a quicker start?

    Read the article

  • Tree Surgeon 2.0 - The future on the T4 Express

    - by Malcolm Anderson
    If you've never been a fan of TreeSurgeon (http://treesurgeon.codeplex.com/) then skip this post.However, if have been there have been some interesting developments over the last couple of years.The biggest one is T4Recently Bill Simser wrote a detailed post about the potential future of tree surgeon, called "Tree Surgeon - Alive and Kicking or Dead and Buried" He raised the question:Times have changed. Since that last release in 2008 so much has changed for .NET developers. The question is, today is the project still viable? Do we still need a tool to generate a project tree given that we have things like scaffolding systems, NuGet, and T4 templates. Or should we just give the project its rightful and respectful send off as its had a good life and has outlived its usefulness.For myself, the answer is, keep it.I've spent the last couple of years doing agile engineering coaching and architecture and from my experience, I can tell you, there are a lot of shops out there that would benefit from having Tree Surgeon as a viable product.  Many would benefit simply from having the software engineering information that is embedded in the tree surgeon site be floating around their conversation.Little things like, keep all of your software needed to run the build, with the build in the version control system.Have your developers and the build system using the same build.Have a one-touch buildSeparate your code from your interfacePut unit tests in first, not lastI've seen companies with great developers suffer from the problems that naturally come from builds taking 3 and 4 hours to run.  It takes work to get that build down to 10 minutes, but the benefits are always worth it.  Tree Surgeon gives you a leg up, by starting you off with a project that you can drop into your Continuous Integration system, right out of the box.Well, it used to be right out of the box.  Today, you have to play with the project to make it work for you, but even with the issues (it hasn't been updated since 2008) it still gives you a framework, with logical separations that you can build from.If you have used Tree Surgeon in the past, take a few minutes and drop a comment about what difference it made in your development style, and what you are doing differently today because of it.

    Read the article

  • Disable or sleep secondary HDD in Macbook

    - by cpak
    I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original HDD to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the HDD is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the HDD when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it. Grateful for any input on this!

    Read the article

  • How do I stop track changes from turning on automatically in Word 2007

    - by Benj
    Whenever I open an existing document in Word 2007 (on Windows XP), word turns on track changes, and changes the display mode to "Final" (that is, not "Final Showing Markup" -- so I often don't even notice track changes is on if I don't remember to pay attention. This happens for ALL existing documents, and doesn't happen for new documents. I can't find any option in the configuration that would control this behavior. I would like to restore the original/default behavior where documents are opening with Track Changes off, and in "Final showing markup" display. Steps to Reproduce Open Word 2007. Create a new document. Verify that track changes is off. Save the document and close Word. Open the document (either directly or through Word). Track changes is now on. Any ideas?

    Read the article

  • Transient network dropout for Xen DomU's

    - by Stephen C
    We've got a CentOS server running a cluster of virtuals. Occasionally the cluster's internal network drops out for a minute or so ... and then comes back. The problem is somehow related to the actual network traffic, but it is not a simple load issue. (The system is generally lightly loaded, and the problem occurs irrespective of actual load.) The setup: CentOS 5.6 on Dom0, various CentOS on the DomU's Hardware - a Dell R710 with a BroadCom NextXpress 2 NIC (sigh) using the latest drivers for the NIC from BroadCom Xen configured to use network-bridge and vif-bridge Some iptable tweaks to route an unrelated port to one of the virtuals. The system has one externally visible IP address, and Dom0 runs an Apache httpd configured with a number of virtual hosts each of which reverse proxies to web servers running on the virtuals. (The virtuals have to be NAT'ed, primarily because we don't have enough allocated public IP addresses.) The symptoms: Works fine most of the time. When someone tries to UPLOAD a large file to one virtuals, the internal network drops out ... for all virtuals: The Dom0 httpd sees a network timeout talking to the backend server on the virtual and reports a 502. A previously established ssh connection from Dom0 to any of the DomU's freezes. Our monitoring shows ping failures for traffic between virtuals. The Xen consoles to the DomU's do not freeze. No log messages in any log files that I can see, on either Dom0 or the DomU's ... apart from the Dom0 httpd logs. After a minute or so, the problem clears by itself. This is 100% reproducible. What we've tried: Downloading, building and installing the latest BNX2 driver on Dom0 Turning off MSI on the NIC - adding "options bnx2 disable_msi=1" to /etc/modprobe.conf Turning off tcp segmentation offload - "ethtool -K eth0 tso off". Sacrificing a black rooster at midnight. I've exhausted all my options apart from switching to KVM ... or slaughtering more roosters. Any suggestions?

    Read the article

  • How to identify cause of system lock on debian squeeze?

    - by David Sanders
    I have a desktop system at work with debian squeeze installed. Every couple days or so, when I come in in the morning, the system appears to be asleep and won't wake up. I suspect it goes into power save mode and then doesn't receive the wake up signal when I click the mouse or touch the keyboard. Does anyone know where I should look in order to start tracking this down? Like log files, etc? I doubt it, but maybe the fact that I'm using a mac aluminum usb keyboard and a wireless usb mouse (that has an off switch) has something to do with it? Maybe, when I turn my mouse off at the end of the day, the system loses track of the device somehow? I dunno :P. Thanks in advance.

    Read the article

  • Development environment for embedded system

    - by Howard Lee Harkness
    I need to develop software in C/C++ for an embedded system. I have Debian 6 running off of a USB hard drive. I would like to be able to generate a stripped-down kernel with modules, and install them either on a CF card or a USB 'thumb' drive. I succeeded in building a Linux 3.6 kernel and running it in Debian off of the USB hard drive, but I am having trouble figuring out how to install it on the thumb drive. I would like a build cycle that looks like this: 1) Build module or kernel with desired software 2) Install it on thumb drive 3) Boot and test I would like to use the same system for both development and testing, if that is feasible. I am looking for resources and tutorials that would help me understand how to do this.

    Read the article

  • nginx timeout albeit ridicolous configuration

    - by Joa Ebert
    The scenario is an API server that should handle uploads. Posting on my.host.com/api/upload should do something with the body the client sends. However the API server has been designed to block the whole request until it fully processed the file, including some analysis which can take up to approx. 5min (...!). This has to change of course. In the meantime I wanted to setup nginx as a load balancer in front of the API servers. I quickly ran into a timeout issue, consulted Google and came up with this ridiculous test configuration: user www-data; worker_processes 4; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; access_log off; sendfile on; send_timeout 3600; keepalive_timeout 3600 120; tcp_nopush on; tcp_nodelay on; gzip off; client_header_timeout 3600; client_body_timeout 3600; proxy_send_timeout 3600; proxy_read_timeout 3600; proxy_connect_timeout 1800; proxy_next_upstream error; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And upstream test { server host1; server host2; } server { listen 80; server_name my.host.com; client_max_body_size 10m; location /api/ { proxy_pass http://test; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $host; proxy_redirect off; } } Still, when an upload happens, I get the following result in the error.log: 2010/12/22 13:36:42 [error] 5256#0: *187359 upstream timed out (110: Connection timed out) while reading response header from upstream, client: xx.xx.xx.xx, server: my.host.com, request: "POST /api/upload HTTP/1.1", upstream: "http://apiserver:80/upload", host: "my.host.com" What else could I do? If I look at the log of the API server I still see that it is processing the request and analyzing the file. But I think 3600 seconds as a timeout should be more than enough. This happens even after a could of seconds. And I did a reload and force-reload of the configuration as well of course.

    Read the article

  • HDMI Audio drops out when display enters powersave

    - by Jared Tritsch
    I have a Windows 8 machine with an AMD APU attached to my Home Theater system through HDMI (HDMI routes through a Home Theater AMP, then into the TV). Here's my problem, Whenever the display is interrupted, usually by the TV being turned off or into powersave mode, the audio device lists as "Disconnected" in windows audio devices and I cant get it to re-recognize that the HDMI audio is, in fact, plugged in. The only solution I have found so far is to restart the machine, which will then recognize the device without any problems, until the next time the TV turns off and the problem once again resurfaces. Has anyone else seen this phenomenon? I have no idea if its the GPU, the HDMI interface, the AMP, or even the TV itself, as there really isn't much a way to tell...

    Read the article

  • Scaling along an arbitrary axis (Dealing with non-uniform scale)

    - by Jon
    I'm trying to build my own little engine to get more familiar with the concepts of 3D programming. I have a transform class that on each frame it creates a Scaling Matrix (S), a Rotation Matrix from a Quaternion (R) and concatenates them together (S*R). Once i have SR, I insert the translation values into the bottom of the three columns. So i end up with a transformation matrix that looks like: [SR SR SR 0] [SR SR SR 0] [SR SR SR 0] [tx ty tz 1] This works perfectly in all cases except when rotating an object that has a non-uniform scale. For example a unit cube with ScaleX = 4, ScaleY = 2, ScaleZ = 1 will give me a rectangular box that is 4 times as wide as the depth and twice as high as the depth. If i then translate this around, the box stays the same and looks normal. The problem happens whenever I try to rotate this scaled box. The shape itself becomes distorted and it appears as though the Scale factors are affecting the object on the World X,Y,Z axis rather than the local X,Y,Z axis of the object. I've done some pretty extensive research through a variety of textbooks (Eberly, Moller/Hoffman, Phar etc) and there isn't a ton there to go off of. Online, most of the answers say to avoid non-uniform scaling which I understand the desire to avoid it, but I'd still like to figure out how to support it. The only thing I can think off is that when constructing a Scale Matrix: [sx 0 0 0] [0 sy 0 0] [0 0 sz 0] [0 0 0 1] This is scaling along the World Axis instead of the object's local Direction, Up and Right vectors or it's local Z, Y, X axis. Does anyone have any tips or ideas on how to handle construction a transformation matrix that allows for non-uniform scaling and rotation? Thanks!

    Read the article

  • root folder php scripts not running in nginx

    - by Thermionix
    nginx with php-fpm on ubuntu 12.04 server. attempting to access /var/www/test.php (via https://example.net/test.php) downloads the script instead of executing it. if I place the test.php in a subdirectory, i.e. /var/www/test/test.php it executes. root.conf; root /var/www; include php-fpm.conf; location ~ /\. { access_log off; log_not_found off; deny all; } php-fpm.conf; location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.socket; include fastcgi_params; } fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_index index.php; fastcgi_param HTTPS on; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; #fastcgi_param SCRIPT_FILENAME $request_filename; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200;

    Read the article

  • Impossible to enable bluetooth under Ubuntu

    - by PCh
    I just installed Ubuntu 12.04 (dual boot, kept Windows just in case) on my new Acer Aspire One 756-877. As soon as I installed it I also installed the Broadcom driver, since wifi wasn't working, and that solved it right away. But when I tried Bluetooth, I had a problem that I see is quite recurring: -The hardware is on (and working fine under Windows) -The icon shows up on the menu, giving me the options of turning Bluetooth on or off, and then just "Bluetooth preferences". -I can apparently turn it on that way, which only lights up the icon but makes no difference at all (and doesn't give any other options in the Bluetooth menu) -When I open "Bluetooth preferences" (whether Bluetooth is apparently on or off, it makes no difference), it says it's disabled and will not let me slide the button to enable it. I've rebooted, but nothing happens. -The material is Broadcom and the port (if it's relevant at all) is Port_#0001.Hub_#0003 I tried the following commands suggested in other similar questions, with no result at all: sudo dmesg | grep blue and sudo service bluetooth start and sudo /etc/init.d/bluetooth start Any other clues on what I can do? Thanks for your time!

    Read the article

  • Exporting a VM running as a Domain Controller

    - by AndyM
    There is a Microsoft KB article that talks about best practices for running a DC on a VM. One of the notes is "Do not use the Export feature on a virtual machine that is running a domain controller". In order to export a VM, the VM needs to be turned off. If you turn off a DC VM, export it, import it on another server and then power the VM back on, there should be no risk as long as the original (exported) VM is never powered back on. Can someone explain to me why this isn't supported? After doing some searching on Google, the sites I found just regurgitated this line from the KB article, but didn't offer any explanation as to why this isn't supported.

    Read the article

  • Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

    - by bumble_bee_tuna
    Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

    Read the article

  • Dell M4600 with nVidia Quadro 2000M hangs on boot when external monitor is connected

    - by vladeta
    I have a problem with my fresh installed Ubuntu 12.04 LTS on my Dell M4600: nVidia quadro 2000M i7-2860 16GB ram 128GB SSD Dell/Samsung 750GB HDD IPS RGB laptop display When it is connected via DP++ to the external Dell U2311H monitor, it hangs on boot or when wakening from suspend. If I detach the DP cable it boots normally. I have tried all combinations that I have found, as adding to grub: "no splash", "boot=pci", "acpi=off", etc... I have also changed in nVidia X settings that external monitor is the primary one and also tried to delete monitor.xml file. There is no change it hangs each time after grub. It starts to load daemons then both screens are blank and then completely hangs with beep sound. What I discovered is if I detach the cable and wait for about 2 sec after grub starts booting and then physically connect DP cable while the Ubuntu is still booting everything works normally and I have a picture on my external screen while the laptop screen is off, just as I wanted. Do you maybe know how to solve this issue? Thank You.

    Read the article

  • Bluetooth not detecting any devices in Windows 7

    - by underDog
    My Lenovo ThinkPad E320 Laptop running Windows 7 64bit has recently been refusing to detect any Bluetooth devices. I have tried to connect, using 'Add devices' under 'devices and printers' to two different Bluetooth mice and my HTC Wildfire android (2.2.1) phone and none of them are detected in the 'Add a device' dialog. History - Bluetooth initially seemed OK when I first got this laptop. I was able to connect to and use my android phone as a remote with no issues. I got my first Bluetooth mouse, it paired, but after each restart, or even after sleeping, it would not 're-connect' (even though it was listed under Bluetooth devices and supposedly 'working'), and I would need to remove the device and add it again. A week or two ago it stopped working all together. It is not detected at all. I gave up on the mouse and bought another (Lenovo ThinkPad brand) only to find that it was not detected either. I subsequently tested my Android phone and discovered it would not detect either. One thing of note is under 'Devices and Printers' there is listed a 'HID Keyboard Device' which under properties is listed as a 'Bluetooth HID Device'. This was not previously there before this problem started. Each time I remove it, or uninstall it from Device Manager it will quickly re-install itself, even with all my Bluetooth devices switched off. My (Google and searching this site) research of this issue has not yielded any definitive answers. I have changed the setting under Device Manager - Bluetooth - Properties - Power Management - 'Allow the computer to turn off this device to save power' to off. I have attempted to un-install and re-install the Bluetooth hardware, including the 'remove drivers' option and downloading and running the Lenovo Bluetooth installer package (found @ http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014997). Bluetooth is turned on. All items under Bluetooth properties (Discovery and Connections) are checked. I have tried changing the batteries. I'm not sure what else I can try, apart from perhaps doing a fresh install of Windows. Any suggestions?

    Read the article

  • Why Does My Windows 7 PC Freeze After Waking from Sleep?

    - by Blaenk
    Hey guys. I have Windows 7 running on my computer and everything is perfect. There's only one little problem. Sometimes when I leave my computer, I come back and my monitor is turned off or asleep, whichever it is. This is fine, I set it to do this. However, after turning on the monitor and moving the mouse around, the mouse cursor freezes; both the keyboard and mouse don't respond to anything, for example the keyboard's windows key won't bring up the start menu and moving the mouse around does not move the cursor around on the screen. I have to wait about a minute or two before things start working again. I figured this was a power savings setting problem, so I went into Control Panel Power Options. I only have Turn off Display = 30 minutes and Put Computer to Sleep = Never. Of course, I went into the advanced power settings to look through there. I put Never to turn off the hard disk, Sleep after never, and that's about it. Nothing else there looks like it might be causing this. I went into the device manager and checked the mouse and the keyboard, and they both have the Allow this device to wake the computer checked for both of them. Perhaps this other bit of information might help: Sometimes I VNC into my PC using my MacBook, and sometimes, as soon as it shows me the desktop, the same thing happens. The mouse won't move and VNC won't register any events on the server (Which is my PC of course). I close the client (And I know it has nothing to do with the client), then immediately restart it and try to connect. When I click the connect button, it hangs there, as if the PC is not responding. Basically it's like whenever I try to wake the computer from sleep, it does so by showing me the desktop, then it freaks out. Then again, I guess the computer isn't sleeping because the setting is set to 'Sleep after = Never'. I honestly don't know what's going on, would appreciate any insight. Thanks!

    Read the article

  • GLSL Normals not transforming propertly

    - by instancedName
    I've been stuck on this problem for two days. I've read many articles about transforming normals, but I'm just totaly stuck. I understand choping off W component for "turning off" translation, and doing inverse/traspose transformation for non-uniform scaling problem, but my bug seems to be from a different source. So, I've imported a simple ball into OpenGL. Only transformation that I'm applying is rotation over time. But when my ball rotates, the illuminated part of the ball moves around just as it would if direction light direction was changing. I just can't figure out what is the problem. Can anyone help me with this? Here's the GLSL code: Vertex Shader: #version 440 core uniform mat4 World, View, Projection; layout(location = 0) in vec3 VertexPosition; layout(location = 1) in vec3 VertexColor; layout(location = 2) in vec3 VertexNormal; out vec4 Color; out vec3 Normal; void main() { Color = vec4(VertexColor, 1.0); vec4 n = World * vec4(VertexNormal, 0.0f); Normal = n.xyz; gl_Position = Projection * View * World * vec4(VertexPosition, 1.0); } Fragment Shader: #version 440 core uniform vec3 LightDirection = vec3(0.0, 0.0, -1.0); uniform vec3 LightColor = vec3(1f); in vec4 Color; in vec3 Normal; out vec4 FragColor; void main() { diffuse = max(0.0, dot(normalize(-LightDirection), normalize(Normal))); vec4 scatteredLight = vec4(LightColor * diffuse, 1.0f); FragColor = min(Color * scatteredLight, vec4(1.0)); }

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >